Posted by The Rev. Brendan X on February 03, 1999 at 23:53:24:
In Reply to: e12 clutch problems posted by Steve on January 29, 1999 at 09:25:47:
Bleeding the system may help temp but you have a leak in the system that needs to be fixed. I would go ahead and replace both slave and master cyl. Check the rug where your cluch pedal goes into the floor and see if brake fluid is there (better yet pull the boot back on the master and make sure it is not wet) if that is dry pull out the slave off of the trans and check for leaks the hose from the slave to the master sometimes will crack and leak . Air does not just get into the system there has to be a leak