Page 1 of 1

I just want to start off by saying i am a NOOB

Posted: Thu Apr 09, 2015 1:13 am
by neetyrom
do e12 have rear sway bar end links? if so do they make a difference on ride ability.
also has anyone tried the KMAC rear camber/caster kit? would you recommend them? my car vibrates from the back when i go 70+ mph and i know it is because i have +/- 1.3 degree off center. or does anyone think it is a universal bearing/joint or cv bearing.
please feel free to elaborate
much thanks

Posted: Thu Apr 09, 2015 1:14 am
by neetyrom
1.3 total degrees off on REAR alignment*

Posted: Thu Apr 09, 2015 1:22 am
by wkohler
They do have end links, but they don't affect ride quality. The bar would though, since it is a torsion spring.

The vibration is not caused by a camber issue. It could be any number of things - a bad tire, a balance problem or a sticking caliper/e-brake shoe just to name a few. Even u-joints in the driveshaft could cause it.

KMAC is crap. If you're going to go for the adjustability, get the weld-on tabs and get a positive, repeatable adjustment.

Posted: Thu Apr 09, 2015 1:57 am
by neetyrom
where would i go to get the weld on tabs and the postive repeatable adjustment

Posted: Thu Apr 09, 2015 11:13 pm
by Mike W.
Vibration at 70 is not from 1.3 degrees of ? Might be a tire, might be a U joint. Those would be my first guesses. But not alignment.