Page 1 of 1
Engine swap and manual tranny conversion
Posted: Sat Nov 28, 2015 9:57 am
by lazytv
Folks
Have a line on a 85 735 engine with manual gearbox with 210000km on it. I'm going to start collecting the parts I'll need. I've read through the swap process and although daunting I'm a sucker for punishment.
Any advice would be appreciated.
Posted: Sat Nov 28, 2015 3:08 pm
by GripGreg
It would help immensely if you say which car you want to install the engine in?
I'm guessing in the '81 528i, but it's just a guess!
Posted: Sun Nov 29, 2015 1:44 pm
by Mike W.
That would work quite well and you could do a motronic conversion on it at the same time. Biggest hangup is you would need to install a speedo drive in the transmission. Not that big a deal, but you would need to get the parts which are expensive new. You can use the ones out of a Getrag 262 4 speed though and those transmissions are generally cheaper.
Posted: Sun Nov 29, 2015 2:42 pm
by CabbageFumes
The driveshaft and rear trans crossmember from the automatic should work with a 265 in an e12. The 7 series ones won't work. I think the guibo is different too. I have the center console for manual trans if you need one.