Please visit our home page for FAQs and other information.
First Fives Bulletin Board Archive L
(2006/02/16 - 2006/08/19)
This board is inactive. It is for archival purposes only. Please visit the active board at
FirstFives.org
.
[
First Fives Home
] [
Board Archives
]
a/c compressor
-
GripGreg
12:29:22 08/19/06
(0)
Holidays
-
Madji
16:24:45 08/18/06
(0)
Back to Black works great on AL. bumpers.
-
don in nj
15:26:26 08/18/06
(0)
Seat Riser Needed
-
CUPDGRA
10:34:15 08/18/06
(0)
A/C conversion
-
Fadi A Faisal
08:55:03 08/18/06
(2)
Re: A/C conversion
-
Robert Bondi AustinTX
13:06:09 08/18/06
(0)
Scroll down to...
-
Lenny D.
12:28:44 08/18/06
(0)
SEO
-
Kade
08:34:46 08/18/06
(0)
Motronic...starter...bolt...help!
-
Matt C
06:04:00 08/18/06
(0)
Alternator troubles
-
Andrew in Calgary
02:46:30 08/18/06
(2)
Re: Alternator troubles
-
Trevor M
05:37:02 08/18/06
(1)
SUCCESS!!
-
Andrew in Calgary
16:24:22 08/18/06
(0)
Management
-
Magomedrasul
23:21:17 08/17/06
(0)
in Russia - 528i 09/1980 e12 - need Getriebe
-
Vitaliy Yadryshnikov
22:59:19 08/17/06
(1)
Looks like Getriebe = Transmission
-
Chris Itterly
03:57:58 08/18/06
(0)
in Russia - 528i 09/1980 e12 - need Getriebe
-
Vitaliy Yadryshnikov
22:58:18 08/17/06
(0)
79 528i for sale, $550
-
Gordon
18:15:57 08/17/06
(0)
Floor pans
-
Gregory
12:09:55 08/17/06
(6)
Try an old farmers trick.....
-
Lars Olbimmerguy
15:54:25 08/17/06
(0)
Re: Floor pans
-
Trevor M
12:24:26 08/17/06
(4)
Re: Floor pans- covering
-
Carl-Seattle
15:05:30 08/17/06
(3)
Re: Floor pans- covering
-
Trevor M
06:06:44 08/18/06
(2)
Re: Floor pans- covering
-
Carl-again
10:00:24 08/18/06
(1)
Re: Floor pans- covering
-
Trevor M
11:17:13 08/18/06
(0)
Spam on this message board
-
Mike Oswald
12:04:39 08/17/06
(2)
Re: Spam on this message board
-
T.Han
19:31:01 08/18/06
(0)
Re: Spam on this message board
-
GripGreg
16:24:01 08/17/06
(0)
Fan clutch wrench = 32 mm ?
-
Carl-Seattle
10:26:27 08/17/06
(6)
Bicycle shop headset or crankset wrench... Thin
-
Lars Olbimmerguy
17:19:27 08/18/06
(0)
Re: Fan clutch wrench = 32 mm ?
-
davesoldbms
10:38:26 08/17/06
(4)
Re: Fan clutch wrench = 32 mm ?
-
Carl-again
11:43:45 08/17/06
(3)
I've used channel-locks and crescent wrench
-
Velocewest
14:16:55 08/17/06
(2)
Re: I've used channel-locks and crescent wrench
-
SIMIAN
15:09:11 08/17/06
(1)
So what size ? davesoldbms says no for 32mm ?
-
Carl-again
20:51:33 08/17/06
(0)
E12 AC
-
Ed G
05:24:20 08/17/06
(3)
Re: E12 AC
-
GripGreg
16:07:43 08/17/06
(2)
Re: E12 AC
-
Ed G
06:44:13 08/19/06
(0)
Re: E12 AC
-
Ed G
06:42:35 08/19/06
(0)
Build Muscle
-
Paolo
21:57:26 08/16/06
(0)
More 5 speed conversion confusion
-
Pete K
21:12:30 08/16/06
(3)
Came over all nostalgic then...
-
Mike E
00:18:46 08/17/06
(2)
Mike - I'd love a decent diff if you've got one?
-
Pete K
18:54:05 08/17/06
(1)
Re: Mike - I'd love a decent diff if you've got on
-
Mike Emmett
20:15:32 08/17/06
(0)
Missing
-
T.Han
19:51:20 08/16/06
(4)
Ignition...
-
Medly
22:37:24 08/16/06
(3)
Concur - ignition
-
Andrew in Calgary
02:09:45 08/17/06
(2)
Re: Concur - ignition
-
T.Han
06:26:33 08/17/06
(1)
Less optimistic -
-
Carl-Seattle
09:30:32 08/17/06
(0)
Need fan clutch assistance
-
RegB
19:11:40 08/16/06
(7)
Re: Need fan clutch assistance
-
jason in philly
19:31:12 08/16/06
(6)
Re: Need fan clutch assistance
-
RegB
20:31:02 08/16/06
(5)
only on old style bolt on clutches
-
Peter Florance
09:54:15 08/17/06
(4)
Re: only on old style bolt on clutches
-
RegB
13:16:28 08/17/06
(3)
I have one on my desk............
-
chris hollis
14:07:15 08/17/06
(1)
Hang on Reg............
-
chris hollis
14:15:59 08/17/06
(0)
Re: only on old style bolt on clutches
-
Peter Florance
14:03:19 08/17/06
(0)
Whining Tach?
-
T-Raz
18:49:08 08/16/06
(0)
Can someone explain how ccv works on e 12s?
-
don in nj
14:33:19 08/16/06
(3)
Re: Can someone explain how ccv works on e 12s?
-
Trevor M
16:11:37 08/16/06
(0)
Erratic as in RPM changes or missing ?
-
Carl-Seattle
14:45:17 08/16/06
(1)
rpm fluctuation............NT
-
don in nj
15:01:01 08/16/06
(0)
Headlight Switch needed for 79 528i
-
Chris in Vancity
14:22:37 08/16/06
(4)
Same as e21, e24, later e3 and e9
-
Velocewest
17:47:37 08/16/06
(0)
Re: Headlight Switch needed for 79 528i
-
Trevor M
16:30:40 08/16/06
(0)
Re: Headlight Switch needed for 79 528i
-
Joseph
15:04:02 08/16/06
(1)
Re: Headlight Switch needed for 79 528i
-
Chris in Vancity
14:59:49 08/17/06
(0)
Idiot light above fuel gauge
-
Ben Tuominen
13:22:13 08/16/06
(2)
Brake wear indicator...
-
Tulsa Dave
14:02:30 08/16/06
(1)
Re: Brake wear indicator...
-
Ben Tuominen
14:14:57 08/16/06
(0)
Politics
-
Maj
11:34:23 08/16/06
(0)
sunroof operation
-
Jeff
08:19:34 08/16/06
(0)
Oops...bad math
-
Andrew in Calgary
03:00:41 08/16/06
(0)
Eastern cars & rust query...
-
Chris in VanCity
01:03:30 08/16/06
(3)
I knew a fellow who used to buy Eastern Porsches
-
Lars Olbimmerguy
07:31:09 08/16/06
(0)
EASTer bunnies
-
Andrew in Calgary
03:11:36 08/16/06
(1)
Argh! Cards not cars.
-
A in C
03:13:37 08/16/06
(0)
Mobile Cell Phone
-
Paine
00:43:31 08/16/06
(0)
what is a m90 L block complete engine worth
-
fidosd9
23:29:06 08/15/06
(2)
Is it an M535i?
-
Remy Davison
01:57:21 08/17/06
(0)
Re: what is a m90 L block complete engine worth
-
JoshInAtlanta
06:16:57 08/16/06
(0)
Time Management
-
Maj
23:09:43 08/15/06
(0)
check this out...
-
ryan bryan
19:40:32 08/15/06
(5)
Re: check this out...
-
Velocewest
11:39:29 08/16/06
(0)
Re: check this out...
-
Blair
20:07:19 08/15/06
(3)
Re: check this out...
-
Michael
21:10:23 08/15/06
(2)
Re: check this out...
-
Ryan Bryan
09:15:47 08/16/06
(1)
The nice Shark that got away-
-
Carl-Seattle
13:19:01 08/16/06
(0)
Casino Gambling
-
Kabir
18:48:57 08/15/06
(0)
5 Speed from '86 635 CSi - will it fit?
-
Pete K
18:17:33 08/15/06
(2)
Yes, it's a CR 5spd
-
Remy Davison
00:56:53 08/16/06
(0)
Dogleg in an 86????
-
Lars OBG
19:57:35 08/15/06
(0)
73 Bav with 3.3L, EFI conv 4 speed for sale in LA
-
Gordon
18:00:20 08/15/06
(0)
New E12 Rad on eBay
-
Eddie in TO
15:51:26 08/15/06
(4)
Re: New E12 Rad on eBay
-
GripGreg
16:46:07 08/16/06
(3)
Re: New E12 Rad on eBay
-
Eddie in TO
06:38:46 08/17/06
(2)
Watching closely
-
Andrew in Calgary
12:36:44 08/17/06
(1)
Ask seller questions -
-
Carl-Seattle
15:25:02 08/17/06
(0)
Any clean E12's FS in California or Western US?
-
Nick in Folsom
13:55:49 08/15/06
(0)
At least it is'nt lipstick
-
anthony in San Rafael
08:47:48 08/15/06
(1)
At some point, She will PREFER lipstick
-
Lars Olbimmerguy
09:45:49 08/15/06
(0)
Loads of junk posts appearing...
-
Mike E
05:45:43 08/15/06
(2)
Re: Loads of junk posts appearing...
-
Andrew in Calgary
12:56:42 08/15/06
(1)
Re: Loads of junk posts appearing...
-
T.Han
13:10:15 08/15/06
(0)
Structured Settlements
-
Panfil
01:44:02 08/15/06
(0)
how do you read a VIN
-
stewart in slc
21:55:50 08/14/06
(5)
Re: how do you read a VIN
-
GripGreg
16:35:54 08/16/06
(1)
Follow Josh's advice
-
Velocewest
17:46:16 08/16/06
(0)
Re: how do you read a VIN
-
GripGreg
16:33:30 08/16/06
(0)
Re: how do you read a VIN
-
JoshInAtlanta
05:32:05 08/15/06
(0)
Re: how do you read a VIN
-
Velocewest
22:49:37 08/14/06
(0)
1980 528i for sale 65,000 miles.
-
ercando
15:41:43 08/14/06
(3)
Re: 1980 528i for sale 65,000 miles.
-
JoshInAtlanta
15:58:29 08/14/06
(2)
Re: 1980 528i for sale 65,000 miles.
-
Michael
21:49:32 08/14/06
(1)
Re: 1980 528i for sale 65,000 miles.
-
JoshInAtlanta
05:34:19 08/15/06
(0)
3.5L with 5-speed for sale in Dallas Area
-
Brad In Texas
15:26:05 08/14/06
(0)
Yoga
-
Maitland
13:52:10 08/14/06
(0)
Stumbling in the heat
-
rknight80528i
10:59:34 08/14/06
(25)
Re: Stumbling in the heat
-
kurt
15:39:44 08/18/06
(0)
Pictures of 3 port
-
don in nj
13:09:01 08/15/06
(11)
Re: Pictures of 3 port
-
Don Daynes
15:13:15 08/15/06
(0)
Re: Pictures of 3 port
-
don in nj
13:10:19 08/15/06
(9)
Another great resource for html basics
-
Jeff in California
14:04:47 08/15/06
(3)
HTML does not work on this BB
-
Don Daynes
15:17:32 08/15/06
(2)
My mistake sorry... I thought
-
Jeff in California
15:48:51 08/15/06
(0)
More good info
-
Don Daynes
15:36:26 08/15/06
(0)
Damn, it translated see link
-
Jeff in California
14:01:36 08/15/06
(0)
Hmmm image link didn't work...try
-
Jeff in California
13:56:50 08/15/06
(0)
Is that a bmw or PO design? NT
-
don in nj
13:54:28 08/15/06
(2)
Random high low idle solved.
-
Don in NJ
19:17:00 08/15/06
(0)
Re: Is that a bmw or PO design? NT
-
Don Daynes
15:33:08 08/15/06
(0)
Check your fuel pressure
-
Mike W.
09:16:07 08/15/06
(1)
Re: Check your fuel pressure
-
rknight80528i
18:24:11 08/15/06
(0)
I have the same problem but never noticed
-
Jeff in California
12:33:01 08/14/06
(9)
UPDATE: somethings different
-
Jeff in California
14:09:34 08/15/06
(0)
Re: I have the same problem but never noticed
-
T.Han
22:49:34 08/14/06
(7)
I found the source but don't know what it is.
-
Don in NJ
10:48:13 08/15/06
(6)
Don, you've got my full attention...PLEASE post...
-
Jeff in California
11:39:03 08/15/06
(5)
Re: Don, you've got my full attention...PLEASE post...
-
Don in nj
12:19:10 08/15/06
(4)
Thanks for your reply...
-
Jeff in California
12:31:49 08/15/06
(3)
how do you post pics here?
-
don in nj
12:36:38 08/15/06
(2)
Pic posting
-
Jeff in California
12:42:27 08/15/06
(1)
pics posted above NT
-
don in nj
13:11:19 08/15/06
(0)
Paging Kevin Kew
-
stewart in slc
00:13:52 08/14/06
(0)
Windy City Vintage Fest, Saturday September 30th
-
ben
22:05:22 08/13/06
(0)
SEO
-
Maks
20:30:02 08/13/06
(0)
E28 Steering wheel wrong threads/not E12 ?
-
Carl
19:45:13 08/13/06
(8)
Re: E28 Steering wheel wrong threads/not E12 ?
-
Ricky535
20:32:28 08/15/06
(0)
The coarse spline E28 wheel will work but...
-
Eric Q
16:01:48 08/14/06
(0)
FAQ Factory Parts interchange -
-
Me again
14:48:51 08/14/06
(0)
Re: E28 Steering wheel wrong threads/not E12 ?
-
JoshInAtlanta
20:20:20 08/13/06
(4)
Re: E28 Steering wheel wrong threads/not E12 ?
-
GripGreg
00:08:18 08/14/06
(3)
No, not AFM.
-
Remy Davison
07:02:53 08/14/06
(0)
Re: E28 Steering wheel wrong threads/not E12 ?
-
JoshInAtlanta
05:37:16 08/14/06
(1)
Seats fit
-
Andrew in Calgary
09:52:27 08/14/06
(0)
Is Xenon still selling their air dam for e12's?
-
Ben Tuominen
16:09:32 08/13/06
(9)
Try Impact Parts, (800)431-3400, more...
-
Jeff Olson
17:40:46 08/13/06
(7)
Re: Try Impact Parts, (800)431-3400, more...
-
JoshInAtlanta
18:02:54 08/13/06
(6)
Top End, E12 performance parts link...
-
Jeff Olson
19:24:46 08/13/06
(5)
Nice "Hot Air Intake"...
-
Velocewest
14:48:29 08/14/06
(1)
Well, at least it sort of looks 'cool'...
-
Jeff Olson
16:42:22 08/14/06
(0)
Re: Top End, E12 performance parts link...
-
JoshInAtlanta
19:28:56 08/13/06
(2)
I have the TEP rear brace
-
Velocewest
16:55:07 08/15/06
(0)
Re: Top End, E12 performance parts link...
-
Carl-Seattle
11:32:39 08/14/06
(0)
Re: Is Xenon still selling their air dam for e12's?
-
Josh
16:34:20 08/13/06
(0)
Air Conditioning not working
-
jimH
14:51:36 08/13/06
(6)
Re: Air Conditioning not working-update
-
jimH
20:23:06 08/15/06
(1)
Re: Air Conditioning not working-update
-
Trevor M
19:43:38 08/16/06
(0)
Re: Air Conditioning not working
-
Peter Florance
18:05:58 08/13/06
(3)
Re: Air Conditioning
-
jimH
05:41:45 08/14/06
(2)
WAG...
-
Lenny D.
10:13:52 08/14/06
(1)
Re: WAG...
-
jimH
13:33:45 08/14/06
(0)
Customer Service
-
Perrin
12:37:46 08/13/06
(0)
need a new heater blower motor
-
Michael
11:17:20 08/13/06
(6)
Re: need a new heater blower motor
-
Rick in Colorado
22:03:40 08/13/06
(5)
Re: need a new heater blower motor
-
Michael
22:10:42 08/13/06
(4)
Re: need a new heater blower motor
-
Rick in Colorado
12:14:02 08/14/06
(3)
Re: need a new heater blower motor
-
Michael
21:46:45 08/14/06
(2)
Re: need a new heater blower motor
-
Rick in Colorado
22:17:28 08/16/06
(1)
Pretty sure an e28 is the same
-
Michael R from Melbourne
02:03:16 08/17/06
(0)
Ignition Control Unit
-
Joseph
21:20:10 08/12/06
(3)
Re: Ignition Control Unit
-
Peter Florance
12:31:56 08/13/06
(2)
Thanks!
-
Joseph
15:38:23 08/13/06
(1)
Re: Thanks!
-
Peter Florance
18:01:42 08/13/06
(0)
Engine serial number and head info wanted
-
Matt C
18:35:35 08/12/06
(4)
Re: Engine serial number and head info wanted
-
Jake Hall
19:33:43 08/13/06
(1)
Re: Engine serial number and head info wanted
-
Matt C
05:47:48 08/14/06
(0)
Re: Engine serial number and head info wanted
-
JoshInAtlanta
18:51:31 08/12/06
(1)
Re: Engine serial number and head info wanted
-
Matt C
19:02:17 08/12/06
(0)
Flat washers or not...manual trans guibo..
-
Matt C
16:34:05 08/12/06
(2)
Re: Flat washers or not...manual trans guibo..
-
Peter Florance
16:37:24 08/12/06
(1)
Re: Flat washers or not...manual trans guibo..
-
Matt C
16:45:52 08/12/06
(0)
New Guibo bolt failures, need TIS help (long)
-
Matt C
16:32:25 08/12/06
(5)
Re: New Guibo bolt failures, need TIS help (long)
-
D.
20:30:32 08/14/06
(1)
Re: New Guibo bolt failures, need TIS help (long)
-
Matt C
06:05:05 08/15/06
(0)
Re: New Guibo bolt failures, need TIS help (long)
-
Peter Florance
12:28:15 08/13/06
(1)
Re: New Guibo bolt failures, need TIS help (long)
-
Matt C
05:49:56 08/14/06
(0)
Re: New Guibo bolt failures, need TIS help (long)
-
Trevor M
17:10:15 08/12/06
(0)
Web Development
-
Malachi
15:51:58 08/12/06
(0)
NE1 need a rebuilt '81 3.3 L-jet?
-
Scott
14:49:35 08/12/06
(1)
My email address did not post
-
Scott
14:52:37 08/12/06
(0)
Draining the coolant
-
Michael
14:35:46 08/12/06
(7)
look under the rear bank of exaust manafolds
-
Sam
06:55:58 08/13/06
(6)
Re: look under the rear bank of exaust manafolds
-
Michael
11:14:12 08/13/06
(5)
Rite of passage
-
Peter Florance - First Fives Dictator for Life
18:02:55 08/13/06
(4)
Re: Rite of passage /Baptism
-
Carl-Seattle
19:32:42 08/13/06
(3)
Re: Rite of passage /Baptism
-
Peter Florance
03:46:55 08/14/06
(2)
Neglected
-
Carl-again
15:23:50 08/14/06
(1)
Re: Neglected
-
Peter Florance
17:41:50 08/14/06
(0)
What is it?
-
Joseph
14:31:06 08/12/06
(6)
Re: What is it?
-
Ryan Bryan
18:08:42 08/12/06
(2)
Plug
-
Joseph
18:18:34 08/12/06
(1)
Re: Plug
-
Joseph
21:23:09 08/12/06
(0)
Re: What is it?
-
Joseph
14:33:28 08/12/06
(2)
Re: What is it?
-
Joseph
14:38:05 08/12/06
(0)
Re: What is it?
-
Joseph
14:36:33 08/12/06
(0)
Time Management
-
Malo
12:51:10 08/12/06
(0)
kidney grille
-
Kevin Gaileyk
09:39:50 08/12/06
(1)
Re: kidney grille
-
Velocewest
21:37:02 08/13/06
(0)
Stocks Mutual Funds
-
Madjid
07:58:49 08/12/06
(0)
Management
-
Pekelo
02:55:49 08/12/06
(0)
Management
-
Kai
01:12:50 08/12/06
(0)
AFM limitations
-
GripGreg
18:14:44 08/11/06
(4)
Try Maximillian for a rebuilt one
-
Jeff in California
20:33:28 08/11/06
(2)
Re: Try Maximillian for a rebuilt one
-
GripGreg
02:52:04 08/12/06
(1)
No nothing wrong as far as I know
-
Jeff in California
14:10:07 08/12/06
(0)
Re: AFM limitations
-
jimH
19:14:34 08/11/06
(0)
Ezine Publishing
-
Kameryn
23:57:31 08/10/06
(0)
Thanks Velocewest
-
Andrew in Calgary
17:26:50 08/10/06
(1)
Wow, slow...
-
Velocewest
17:32:53 08/10/06
(0)
Project Car
-
Kevin Kew
14:07:41 08/10/06
(4)
where are you located?
-
stewart in slc
14:37:59 08/10/06
(3)
Cincinnati, Ohio
-
Kevin Kew
14:39:51 08/10/06
(2)
Re: Cincinnati, Ohio
-
JoshInAtlanta
17:13:07 08/10/06
(1)
Re: Cincinnati, Ohio
-
Oliver
06:59:23 08/12/06
(0)
Do e30 fronts sport seats fit in an e12, 80 528i ?
-
Doug
12:39:58 08/10/06
(3)
Got a pair
-
Karl in KS
06:34:52 08/12/06
(0)
many have done it
-
stewart in slc
14:05:10 08/10/06
(1)
Only a question of how much time , effort and $$
-
Carl-Seattle
15:00:43 08/10/06
(0)
Paging Dr. Haas to the Exhaust consultation phone
-
Matt C
07:40:16 08/10/06
(1)
I think he's still traveling for a week or so (nt)
-
Velocewest
12:23:30 08/10/06
(0)
redline mtl or mtl90? 5 spd. NT
-
don in nj
07:20:44 08/10/06
(2)
and how many qts do I need?..........NT
-
Don in NJ
07:26:08 08/10/06
(1)
Re: and how many qts do I need?..........NT
-
jimH
10:15:33 08/10/06
(0)
Mystery switch(AGAIN)
-
Alan Crane
01:50:28 08/10/06
(3)
Re: Mystery switch(AGAIN)
-
Velocewest
12:27:17 08/10/06
(0)
Re: Mystery switch(AGAIN)
-
Matt C
06:58:21 08/10/06
(1)
Re: Mystery switch(AGAIN)
-
Alan Crane
18:14:07 08/10/06
(0)
steaming overflow
-
gary in WEst Oz
00:14:58 08/10/06
(2)
Re: steaming overflow
-
Ryan Bryan
06:51:26 08/10/06
(1)
Re: steaming overflow
-
Michael R from Melbourne
19:17:55 08/13/06
(0)
Adjusting valves art or science?
-
Anthony in San Rafael
19:11:03 08/09/06
(7)
No sound=Burnt valves.......
-
Lars OBG
19:55:03 08/09/06
(6)
Re: No sound=Burnt valves.......
-
T.Han
20:55:29 08/10/06
(2)
The rocker has two ends.....
-
Lars Olbimmerguy
08:22:36 08/13/06
(0)
Cam side valve side
-
Andrew in Calgary
21:34:16 08/10/06
(0)
I prefer a snug .011
-
Velocewest
12:31:40 08/10/06
(0)
This is great to go on
-
Anthony in San Rafael
20:52:34 08/09/06
(1)
Not intending to knock your coworkers....
-
Lars..
22:09:22 08/09/06
(0)
an e12 geting a lift.. a lift to the crusher
-
Sam Schultz
18:41:46 08/09/06
(6)
Re: an e12 geting a lift.. a lift to the crusher
-
GripGreg
21:41:21 08/10/06
(2)
they were no good, but thats the right name
-
Sam
14:54:59 08/11/06
(1)
Re: they were no good, but thats the right name
-
GripGreg
02:55:34 08/12/06
(0)
Re: an e12 geting a lift.. a lift to the crusher
-
Trevor M
18:55:52 08/09/06
(2)
yup and sent ya pics
-
Sam
19:05:03 08/09/06
(1)
You did???
-
Trevor M
19:39:33 08/09/06
(0)
Plastic E28 Radiator tanks
-
Andrew in Calgary
17:56:24 08/09/06
(9)
Re: Plastic E28 Radiator tanks
-
GripGreg
08:48:33 08/11/06
(3)
About the AFM
-
Trevor M
17:07:29 08/11/06
(1)
Re: About the AFM
-
GripGreg
02:43:23 08/12/06
(0)
Need some interchange help here
-
Andrew in Calgary
14:31:48 08/11/06
(0)
Re: Plastic E28 Radiator tanks
-
GripGreg
21:47:47 08/10/06
(2)
Re: Plastic E28 Radiator tanks
-
Peter Florance
04:51:31 08/11/06
(1)
Re: Plastic E28 Radiator tanks
-
GripGreg
08:37:39 08/11/06
(0)
Re: Plastic E28 Radiator tanks
-
Peter Florance
00:15:47 08/10/06
(1)
Re: Plastic E28 Radiator tanks
-
Andrew in Calgary
17:11:51 08/10/06
(0)
Customer Service
-
Magdi
14:22:55 08/09/06
(0)
WTD: help w/ FAQ on converting to euro bumpers
-
...tom
10:28:11 08/09/06
(0)
? on fuel pump/filter assembly on m535i
-
Ryan Bryan
09:39:19 08/09/06
(1)
Re: ? on fuel pump/filter assembly on m535i
-
Thomas
09:19:10 08/11/06
(0)
rattling, chatter on deceleration or when shifting
-
BillyDee
09:26:13 08/09/06
(3)
Re: rattling, chatter on deceleration or when shifting
-
BillyDee
01:29:36 08/12/06
(0)
Re: rattling, chatter on deceleration or when shifting
-
Don in Tulsa
18:39:53 08/10/06
(0)
Re: rattling, chatter on deceleration or when shif
-
T.Han
10:32:02 08/09/06
(0)
wheel cars needed
-
jason in philly
06:17:50 08/09/06
(0)
Steering column
-
krister karto
00:48:19 08/09/06
(4)
wait!
-
Ryan Bryan
07:24:42 08/09/06
(3)
Re: wait!
-
krister karto
07:43:35 08/09/06
(2)
You missed a bolt -
-
Carl-Seattle
08:58:23 08/09/06
(0)
pry out the roundel in the center of the wheel
-
...tom
08:57:21 08/09/06
(0)
BMW drops current ad slogan
-
Gordon
23:49:16 08/08/06
(6)
What next? Dropping the Hoffmeister Kink? (nt)
-
Eric Q
11:05:10 08/10/06
(0)
BMW NA say not so
-
Al from Oz
17:30:35 08/09/06
(1)
Re: BMW NA say not so
-
Gordon
23:12:49 08/09/06
(0)
Oh brother
-
Misha
08:55:32 08/09/06
(2)
Ultimate Driving slogan -
-
Carl-Seattle
09:10:29 08/09/06
(1)
Eh...with the E60, does it really make you wonder?
-
M. Keehn
12:27:25 08/09/06
(0)
help, my engine is running rough on acceleration..
-
santiago
22:55:40 08/08/06
(7)
How about the ignition wires? NT
-
don in nj
06:27:34 08/09/06
(6)
Re: How about the ignition wires? NT
-
santiago
10:22:19 08/09/06
(5)
Spray a little water on them to test. nt
-
Don Daynes
15:25:36 08/09/06
(0)
Re: How about the ignition wires? NT
-
don in nj
11:14:24 08/09/06
(3)
Re: How about the ignition wires? NT
-
Ryan Bryan
13:46:53 08/09/06
(2)
what should I check other than ignition wires? nt
-
santiago
14:17:23 08/09/06
(1)
Re: what should I check - timing and O2 sensor
-
Carl-Seattle
15:13:15 08/09/06
(0)
Vacation Rentals
-
Maginyur
19:04:31 08/08/06
(0)
oil out tailpipe
-
Kevin Gailey
19:01:16 08/08/06
(1)
Re: oil out tailpipe
-
T.Han
10:24:54 08/09/06
(0)
Paging Adam Wilson - Airdam question
-
Trevor M
16:30:50 08/08/06
(1)
Try email
-
Velocewest
17:46:08 08/09/06
(0)
Vcum Diagram.
-
R . Gomez
16:18:33 08/08/06
(0)
xo4ymerc
-
Kaleynik
16:18:26 08/08/06
(0)
xo4ymerc
-
Parley
15:33:13 08/08/06
(0)
euro rear bumper install - broke US bumper bolt
-
...tom
12:07:14 08/08/06
(2)
Re: euro rear bumper install - broke US bumper bolt
-
Trevor M
13:10:40 08/08/06
(1)
the die grinder worked, thanks (more)
-
...tom
10:25:19 08/09/06
(0)
e12 on television show
-
Big Dog
10:04:42 08/08/06
(8)
Yep,,, very strong - my first e12
-
Lars OBG
10:50:43 08/08/06
(7)
Lars - post the side shot too !
-
Carl-Seattle
13:55:10 08/08/06
(6)
Side shot
-
Lars
14:07:42 08/08/06
(5)
I am a sick man...all I see are salvage parts
-
don in nj
14:56:07 08/08/06
(0)
Looks just like my '85 E23...
-
Tulsa Dave
14:11:47 08/08/06
(0)
Well, OK, I did bend the steering wheel, as you
-
Lars....
14:09:51 08/08/06
(2)
Re: Well, OK, I did bend the steering wheel, as you
-
simian
17:02:07 08/08/06
(1)
Not in court, but I did learn one thing.
-
Lars Olbimmerguy
17:18:29 08/08/06
(0)
idles at 900-1100, then drops to 500...sometimes??
-
Don in nj
07:50:10 08/08/06
(1)
Re: idles at 900-1100, then drops to 500...sometimes??
-
Matt C
11:50:25 08/08/06
(0)
xo4ymerc
-
Kaloosh
07:25:51 08/08/06
(0)
2 valves or 4?
-
Andrew in Calgary
01:06:00 08/08/06
(11)
Re: 2 valves or 4?
-
RonP
15:04:52 08/08/06
(1)
Why
-
Andrew in Calgary
21:22:11 08/08/06
(0)
Let's clear up what was discussed, Andrew
-
Adam W. in Chicago
07:15:25 08/08/06
(5)
Now that your panties are in a bunch Adam
-
Andrew in Calgary
13:03:37 08/08/06
(4)
A dignified response to an poor one
-
Adam W. in Chicago
17:54:09 08/08/06
(3)
A dignified response?
-
Andrew in Calgary
19:48:08 08/08/06
(2)
Re: A dignified response?
-
RonP
20:08:18 08/08/06
(1)
Point taken
-
Andrew in Calgary
20:29:41 08/08/06
(0)
none of the images work
-
Adam W. in Chicago
07:02:32 08/08/06
(2)
Fixed (nt)
-
Andrew in Calgary
16:25:19 08/08/06
(0)
Neither do any of the sites suddenly
-
Andrew in Calgary
15:29:28 08/08/06
(0)
Motronic flywheel
-
Mike E
23:25:51 08/07/06
(8)
Re: Motronic flywheel
-
Mike E
05:11:59 08/08/06
(0)
heheheh
-
Andrew in Calgary
01:01:33 08/08/06
(6)
Re: heheheh
-
Mike E
17:18:54 08/08/06
(1)
90 degrees
-
Andrew in Calgary
18:15:01 08/08/06
(0)
Scroll down a few inches
-
Velocewest
12:49:20 08/08/06
(1)
Sorry, not inches, "pages"
-
Velocewest
12:50:44 08/08/06
(0)
I do, but
-
Mike W.
08:11:21 08/08/06
(0)
Re: heheheh
-
Chris Itterly
03:35:41 08/08/06
(0)
front stress bar question... (again)
-
Micah
21:48:23 08/07/06
(2)
Re: front stress bar question... (again)
-
Velocewest
12:44:32 08/08/06
(1)
Thanks for the clarification
-
Micah
20:55:03 08/08/06
(0)
ECU mounting
-
Peter G
16:41:37 08/07/06
(0)
Anyone install an 80 or 90amp alternator?
-
Joseph
16:05:44 08/07/06
(1)
Nevermind, should have checked archives 1st, DOH!
-
Joseph
17:09:04 08/07/06
(0)
xo4ymerc
-
Magdi
15:27:52 08/07/06
(0)
Anyone need any parts???
-
JoshInAtlanta
15:16:57 08/07/06
(17)
Re: Anyone need any parts???
-
JoshInAtlanta
15:18:00 08/07/06
(16)
Lock motors?
-
Jeff in California
10:27:30 08/08/06
(0)
Re: Anyone need any parts???
-
Chris Itterly
03:28:40 08/08/06
(1)
Re: Anyone need any parts???
-
Josh
06:00:51 08/08/06
(0)
Re: Anyone need any parts???
-
Warren D.
21:23:22 08/07/06
(0)
Re: Anyone need any parts???
-
Joseph
16:43:25 08/07/06
(1)
Not sure, let me check...
-
JoshInAtlanta
16:47:00 08/07/06
(0)
Are you SURE it's just a transplant?
-
Adam W. in Chicago
15:45:32 08/07/06
(9)
Re: Are you SURE it's just a transplant?
-
JoshInAtlanta
16:43:02 08/07/06
(8)
Double check for a second VIN plate...
-
Tulsa Dave
22:04:31 08/07/06
(3)
agreed, it is still possible this is a special E12
-
Adam W. in Chicago
08:41:43 08/08/06
(2)
Adam... just ran the VIN
-
JoshInAtlanta
12:54:05 08/08/06
(0)
Re: agreed, it is still possible this is a special E12
-
JoshInAtlanta
12:30:48 08/08/06
(0)
Re: Are you SURE it's just a transplant?
-
Ben Tuominen
20:52:11 08/07/06
(3)
Re: Are you SURE it's just a transplant?
-
JoshInAtlanta
05:59:35 08/08/06
(2)
Re: Are you SURE it's just a transplant?
-
Ben Tuominen
06:34:37 08/08/06
(1)
Re: Are you SURE it's just a transplant?
-
Josh
13:10:59 08/08/06
(0)
Buttons on kick panel blw steering what are these?
-
Jeff in California
12:23:52 08/07/06
(7)
Re: Buttons on kick panel blw steering what are these?
-
Ryan Bryan
12:33:11 08/07/06
(6)
Thank you Ryan...more
-
Jeff in California
14:06:36 08/07/06
(5)
Re: Thank you Ryan...more
-
T.Han
05:49:50 08/08/06
(4)
You don't say, well then...
-
Jeff in California
08:51:54 08/08/06
(3)
according to mine...
-
Ryan Bryan
09:45:50 08/08/06
(2)
FIXED! Thank you all
-
Jeff in California
13:43:50 08/08/06
(0)
Haynes Manual page 95.
-
Carl-Seattle
10:27:39 08/08/06
(0)
Selling never installed E12 front spoiler
-
Andrew
12:17:55 08/07/06
(1)
You've got mail!
-
Jeff Olson
13:30:04 08/07/06
(0)
xo4ymerc
-
Karimah
09:00:27 08/07/06
(0)
Was a matching power rt. side mirror offered? '78
-
don in nj
08:22:55 08/07/06
(1)
Yep
-
Mike W.
16:33:14 08/07/06
(0)
Book Reviews
-
Paulos
08:22:01 08/07/06
(0)
need help with mirror conversion
-
jason in philly
06:43:52 08/07/06
(0)
Gearbox switches
-
Alan from Bowen
23:18:59 08/06/06
(1)
Re: Gearbox switches
-
Velocewest
15:50:27 08/07/06
(0)
Recipes
-
Pello
22:22:59 08/06/06
(0)
Parts alert...new doors at BAS
-
Matt C
16:14:06 08/06/06
(1)
dents and dings
-
Adam W. in Chicago
15:47:30 08/07/06
(0)
Trunk Lid
-
Joseph
14:40:07 08/06/06
(2)
Re: Trunk Lid
-
JoshInAtlanta
14:53:25 08/06/06
(1)
Fort Worth, Texas 76021
-
Joseph
19:36:15 08/06/06
(0)
Oz Quiz--- What is it? I bet you know!
-
Lars Olbimmerguy
14:10:18 08/06/06
(5)
We love our utes here in Oz!
-
Michael R from Melbourne
02:46:07 08/08/06
(0)
Now called a uteless
-
Al from Oz
21:10:02 08/06/06
(0)
Re: Oz Quiz--- What is it? I bet you know!
-
Damien in Brisbane
19:43:49 08/06/06
(1)
The pig and church story prevails.....
-
Lars OBG
20:45:17 08/06/06
(0)
Oops... perhaps a working Link????
-
Lars
14:11:48 08/06/06
(0)
rear wheel bearing
-
Andrew Francis
13:18:26 08/06/06
(1)
Re: rear wheel bearing
-
D.
23:39:53 08/08/06
(0)
Floor Pans
-
Gregory
10:35:57 08/06/06
(1)
Re: Floor Pans
-
T.Han
19:54:21 08/07/06
(0)
AFM
-
GripGreg
10:19:44 08/06/06
(2)
Re: AFM
-
Andrew in Calgary
13:50:05 08/07/06
(1)
Re: AFM
-
GripGreg
09:27:01 08/09/06
(0)
Broadband Internet
-
Kallinyk
10:08:33 08/06/06
(0)
Clutch kit
-
Trevor M
09:44:47 08/06/06
(0)
Web Design
-
Kailas
09:21:05 08/06/06
(0)
Green unspoiled hood & seats
-
Oliver
13:32:45 08/05/06
(0)
auxiliary fan change out ?
-
jimH
12:38:38 08/05/06
(3)
Re: auxiliary fan change out ?
-
Joseph
14:08:37 08/05/06
(2)
Re: auxiliary fan
-
jimH
17:22:02 08/05/06
(1)
Re: auxiliary fan
-
Joseph
20:04:44 08/05/06
(0)
SEO
-
Kamal
11:36:10 08/05/06
(0)
Shift knob is pressed on...I broke mine removing
-
Don in NJ
10:18:12 08/05/06
(3)
Re: Shift knob is pressed on...I broke mine removing
-
Mike W.
09:05:12 08/06/06
(1)
Re: Shift knob is pressed on...I broke mine removi
-
Kevin Gailey
09:19:33 08/07/06
(0)
Re: Shift knob is pressed on...I broke mine removing
-
Evan Kintner
21:18:29 08/05/06
(0)
Branding
-
Kadeem
08:12:27 08/05/06
(0)
Where has all the 20-50 oil gone?
-
don in nj
06:28:44 08/05/06
(5)
Re: Where has all the 20-50 oil gone?
-
Michael Oswald
10:49:43 08/05/06
(0)
I buy it in valvoline all the time, castrol etc
-
Sam
07:44:44 08/05/06
(3)
Re: I buy it in valvoline all the time, castrol etc
-
Mike W.
09:02:10 08/05/06
(2)
Re: I buy it in valvoline all the time, castrol et
-
Michael
09:27:51 08/05/06
(1)
Re: I buy it in valvoline all the time, castrol et
-
Ben Tuominen
16:35:20 08/05/06
(0)
Adult
-
Adult
05:47:02 08/05/06
(0)
Guibo out in 5 easy pieces-Vibration Gone!
-
anthony in San Rafael
20:27:32 08/04/06
(0)
bmw 528i 1981 E12 for sale
-
helene
18:23:40 08/04/06
(1)
Re: bmw 528i 1981 E12 for sale
-
vit
21:59:34 08/17/06
(0)
Center drive shaft bearing removal tips anyone?
-
Matt C
15:57:02 08/04/06
(1)
Re: Center drive shaft bearing removal tips anyone?
-
Medly
18:38:28 08/04/06
(0)
WTB e12 5 speed tranny
-
Pecsok
12:05:27 08/04/06
(1)
try Al Taylor
-
sam
08:29:29 08/05/06
(0)
Both brake lights out not the bulbs what else?
-
Jeff in California
11:59:17 08/04/06
(8)
FIXED. New brake light switch and I'm back
-
Jeff in California
11:13:35 08/16/06
(0)
Are you using OEM bulbs? Grey bases????
-
Lars Olbimmerguy
13:22:06 08/04/06
(0)
Battled with mine and
-
Carl-Seattle
12:14:50 08/04/06
(5)
Pedal switch? More info please
-
Jeff in California
12:43:52 08/04/06
(4)
Re: Pedal switch? More info please
-
Carl
16:02:01 08/04/06
(3)
Re: Pedal switch? More info please
-
Mike W.
17:15:31 08/04/06
(2)
Had luck with just adjusting mine
-
Remy Davison
05:41:10 08/05/06
(1)
Try the fuse!
-
Matt C
09:37:33 08/07/06
(0)
Steering slop fixed + cool thing about new engine
-
Adam W. in Chicago
07:24:41 08/04/06
(5)
CW to tighten? On MBs it's CCW to tighten. NT
-
don in nj
10:11:13 08/04/06
(0)
What was adjusted to fix steering slop
-
Misha
09:25:59 08/04/06
(1)
read this thread
-
Adam W. in Chicago
09:43:11 08/04/06
(0)
Steering Tech-FAQ pics ?
-
Carl-Seattle
09:18:07 08/04/06
(1)
Re: Steering Tech-FAQ pics ?
-
jimH
09:48:06 08/15/06
(0)
What's the bolt pattern and offset for our cars?
-
Michael Oswald
22:57:10 08/03/06
(1)
Re: What's the bolt pattern and offset for our cars?
-
Michael R from Melbourne
03:49:04 08/04/06
(0)
I know were that vibration was coming from.
-
Anthony in San Rafael
22:55:10 08/03/06
(3)
Re: I know were that vibration was coming from.
-
Allan A.
08:22:00 08/06/06
(0)
I wish mine had enough grunt
-
Michael R from Melbourne
03:51:29 08/04/06
(1)
Re: I wish mine had enough grunt
-
Mike E
16:15:47 08/04/06
(0)
528 thermostat
-
GripGreg
19:46:07 08/03/06
(2)
Re: 528 thermostat
-
Michael
20:15:16 08/03/06
(1)
Re: 528 thermostat
-
GripGreg
09:24:43 08/04/06
(0)
Help...2 topics tranny removal
-
MattC
19:44:38 08/03/06
(5)
Re: Help...2 topics tranny removal
-
D.
11:12:30 08/04/06
(0)
screw that, remove the tranny and bell housing
-
Adam W. in Chicago
07:26:52 08/04/06
(2)
Re: screw that, remove the tranny and bell housing
-
Matt C
07:57:28 08/04/06
(0)
Ack, dump = "dumb", typo (nt)
-
Adam W. in Chicago
07:27:49 08/04/06
(0)
it's a tuffy
-
stewart in slc
21:01:24 08/03/06
(0)
Driveshaft Question
-
JoshInAtlanta
18:20:25 08/03/06
(2)
Re: Driveshaft Question
-
D.
11:27:19 08/04/06
(1)
Re: Driveshaft Question
-
JoshInAtlanta
11:58:32 08/04/06
(0)
turned off 2 bolts on the thermostat cover
-
Michael
18:03:41 08/03/06
(12)
I have done it numerous times....
-
Lars Olbimmerguy
18:13:14 08/03/06
(11)
Re: I have done it numerous times....
-
T.Han
20:31:09 08/03/06
(0)
Re: I have done it numerous times....
-
Michael
18:30:05 08/03/06
(9)
Re: I have done it numerous times....
-
Michael
18:43:57 08/03/06
(8)
As much as the thought of snapping the
-
Lars Olbimmerguy
19:52:15 08/03/06
(7)
Re: As much as the thought of snapping the
-
Michael
19:54:11 08/03/06
(6)
get'em at the dealer
-
Adam W. in Chicago
14:38:48 08/04/06
(0)
Re: As much as the thought of snapping the
-
Michael
20:12:35 08/03/06
(4)
Re: As much as the thought of snapping the
-
Peter Florance
05:01:18 08/04/06
(0)
Right.. the cover should slide off the bolts...
-
Lars
22:12:52 08/03/06
(0)
Re: As much as the thought of snapping the
-
Mike W.
22:01:24 08/03/06
(1)
Re: As much as the thought of snapping the
-
Michael
06:08:30 08/04/06
(0)
How many are NOT using mtl in tranny?
-
Don in NJ
10:40:57 08/03/06
(7)
Re: How many are NOT using mtl in tranny?
-
Mike W.
21:49:45 08/03/06
(0)
Re: How many are NOT using mtl in tranny?
-
Walt Barie
12:57:12 08/03/06
(4)
Re: How many are NOT using mtl in tranny?
-
T.Han
17:46:15 08/03/06
(1)
Re: How many are NOT using mtl in tranny?
-
Walt Barie
05:21:48 08/04/06
(0)
Re: How many are NOT using mtl in tranny?
-
GripGreg
15:34:28 08/03/06
(1)
Re: How many are NOT using mtl in tranny?
-
Walt Barie
05:12:10 08/04/06
(0)
Redline 75W90
-
Chris Itterly
12:49:51 08/03/06
(0)
Sun roof seal
-
T.Han
10:01:26 08/03/06
(4)
Gasket seal not intended to be leak tight.....
-
Lars
10:31:49 08/03/06
(3)
I think I need a new gasket
-
Andrew in Calgary
02:17:10 08/04/06
(0)
Re: Gasket seal not intended to be leak tight.....
-
T.Han
13:00:26 08/03/06
(1)
Yeah... those sheets are impossible to get off...
-
Lars
15:24:39 08/03/06
(0)
Brake shoe rattle.
-
T.Han
09:56:03 08/03/06
(3)
Caused by vibration
-
Misha
12:41:24 08/03/06
(2)
Re: Caused by vibration
-
T.Han
12:49:44 08/03/06
(1)
Yes: Piston side
-
Misha
16:33:40 08/03/06
(0)
Warm idle
-
T.Han
09:52:46 08/03/06
(0)
Idler arm bushing
-
T.Han
09:48:02 08/03/06
(2)
Re: Idler arm bushing
-
Peter Florance
05:12:29 08/04/06
(1)
Re: Idler arm bushing
-
Michael Oswald
10:57:18 08/05/06
(0)
81 528i FS, 5 speed, $600
-
Gordon
17:20:30 08/02/06
(3)
Re: 81 528i FS, 5 speed, $600
-
Craig in Davis
20:11:20 08/02/06
(2)
Re: 81 528i FS, 5 speed, $600
-
Mike W.
09:13:59 08/03/06
(0)
Re: 81 528i FS, 5 speed, $600
-
Craig in Davis
20:12:18 08/02/06
(0)
1976 E12 for Sale
-
Bryan Boyce
16:49:04 08/02/06
(1)
Re: 1976 E12 for Sale
-
JoshInAtlanta
17:09:55 08/02/06
(0)
'77 e12
-
GripGreg
12:51:49 08/02/06
(2)
Re: '77 e12
-
Remy Davison
06:41:25 08/03/06
(1)
Re: '77 e12
-
GrioGreg
15:30:00 08/03/06
(0)
Update: Vintage BMW Gathering in Herndon, VA
-
brad_c'ville_VA
08:55:55 08/02/06
(2)
Can a 80 633 be invited?
-
Eric
07:32:26 08/07/06
(0)
I will be there with bells on
-
Sam
15:15:56 08/03/06
(0)
Need Some Transmission Info
-
JoshInAtlanta
08:27:58 08/02/06
(9)
Re: Need Some Transmission Info
-
D.
11:26:08 08/04/06
(0)
On its best day, the CR gearbox was rated weak....
-
Lars Olbimmerguy
15:16:23 08/02/06
(2)
mine has 165K plus on it
-
Adam W. in Chicago
07:17:51 08/03/06
(0)
Link to Metric Mechanics comments on CR 5 speed
-
Lars OBG
15:50:24 08/02/06
(0)
Re: Need Some Transmission Info
-
Don Daynes
14:56:54 08/02/06
(2)
Whoah Don, you're still out there lurking?
-
Adam W. in Chicago
07:19:56 08/03/06
(1)
Re: Whoah Don, you're still out there lurking?
-
Don Daynes
07:39:57 08/03/06
(0)
Costly to rebuild
-
Misha
09:34:17 08/02/06
(1)
Re: Costly to rebuild
-
JoshInAtlanta
11:47:54 08/02/06
(0)
E12 roundup at Summit Point Raceway this Sat!
-
PierreD
19:47:30 08/01/06
(2)
Is there a Club corral?
-
Greg J
18:16:56 08/02/06
(1)
No...just drop by. Should be free admission
-
PierreD
16:58:30 08/03/06
(0)
Compression ratio calculation
-
Chris Itterly
03:50:31 08/01/06
(3)
Some info
-
Mike W.
18:56:06 08/01/06
(1)
Re: Some info
-
Chris Itterly
21:05:19 08/01/06
(0)
Forgot to include the head gasket thickness (nt)
-
Chris Itterly
07:31:47 08/01/06
(0)
opinions on my e12 modification idea?
-
santiago
23:38:23 07/31/06
(1)
Re: opinions on my e12 modification idea?
-
Velocewest
01:33:47 08/01/06
(0)
Parts help
-
Matt C
20:05:20 07/31/06
(6)
I have one..............
-
chris hollis
12:21:52 08/01/06
(0)
expensive little sucker
-
Adam W. in Chicago
20:16:25 07/31/06
(4)
Is that it?
-
Matt C
21:38:06 07/31/06
(3)
definitely it
-
Adam W. in Chicago
04:10:20 08/01/06
(2)
ordered some E34 parts, inquired on price
-
Adam W. in Chicago
08:43:46 08/01/06
(1)
Re: ordered some E34 parts, inquired on price
-
Matt C
15:20:28 08/01/06
(0)
anybody selling an E12?
-
M. Keehn
19:44:54 07/31/06
(5)
Re: anybody selling an E12?
-
Ron
20:11:13 08/04/06
(0)
Re: anybody selling an E12?
-
Matt C
19:59:05 07/31/06
(0)
Re: anybody selling an E12?
-
Tommy Allen
19:54:54 07/31/06
(2)
Re: anybody selling an E12?
-
Ponoka Dave
21:26:40 08/01/06
(1)
Re: anybody selling an E12?
-
tommy
19:07:30 08/02/06
(0)
528i's for Sale
-
Lorens Kulla
15:57:27 07/31/06
(2)
Re: 528i's for Sale
-
Lorens Kulla
17:25:12 07/31/06
(1)
Re: 528i's for Sale
-
papajimmm
04:35:15 08/01/06
(0)
From BMW to Volvo. .
-
Jaime Obando
09:08:17 07/31/06
(7)
Re: From BMW to Volvo. .
-
Jim
15:39:43 07/31/06
(0)
Re: From BMW to Volvo. .
-
Ernie in Houston
09:42:10 07/31/06
(2)
Insurance did not want to pay for it. .
-
Jaime Obando
14:18:17 07/31/06
(0)
Re: From BMW to Volvo. .
-
benw
10:36:30 07/31/06
(0)
Have heard a forum called "Brick" for Volvo.
-
Lars OBG
09:15:29 07/31/06
(2)
yep,,,,,the brickboard
-
chris hollis
11:23:32 07/31/06
(1)
You don't know what you have until you loose it..
-
Jaime Obando
14:21:49 07/31/06
(0)
Anyone have a good to go 265/6 5 speed around.
-
Matt C
09:01:36 07/31/06
(0)
Gray on red E12 on ebay, Wash D.C. area
-
Adam W. in Chicago
08:50:37 07/31/06
(5)
It's Delphin Metallic and Standard Transmission...
-
Lars Olbimmerguy
13:23:14 08/01/06
(1)
Delphin is a dark grey... not quite charcoal
-
Lars
19:18:23 08/01/06
(0)
I could be Ascot Grey
-
Eric Q
13:26:52 07/31/06
(0)
Re: Gray on red E12 on ebay, Wash D.C. area
-
Ernie in Houston
09:59:44 07/31/06
(0)
Definitely.... Delphin grey over Bordello Red.
-
Lars OBG
09:12:08 07/31/06
(0)
Help me value this car
-
CUPDGRA
08:35:10 07/31/06
(1)
Re: Help me value this car
-
T.Han
06:47:26 08/01/06
(0)
latest auto-x vid
-
Peter Florance
04:13:48 07/31/06
(5)
Re: latest auto-x vid
-
Chris Itterly
03:37:40 08/01/06
(1)
Re: latest auto-x vid
-
Peter Florance
04:38:33 08/01/06
(0)
Nice work
-
MIsha
08:17:37 07/31/06
(1)
Re: Nice work
-
Peter Florance
18:55:36 08/02/06
(0)
Looks great!
-
TCD
06:28:27 07/31/06
(0)
Queensland car, no affil
-
Mike E
04:04:46 07/31/06
(2)
Re: Queensland car, no affil
-
Alan Crane
16:51:55 07/31/06
(1)
Can't be a 528
-
Remy Davison
05:01:56 08/02/06
(0)
steering wanderers to left
-
gary in west oz
20:17:35 07/30/06
(2)
Re: steering wanderers to left
-
Mike E
05:37:39 07/31/06
(1)
Re: steering wanderers to left
-
gary in West Oz
19:03:19 07/31/06
(0)
Rear valance euro M535i
-
Matt C
17:26:56 07/30/06
(2)
wasn't sure if you wanted spoiler part # or what
-
Adam W. in Chicago
19:22:26 07/30/06
(1)
Re: wasn't sure if you wanted spoiler part # or what
-
Matt C
06:18:18 07/31/06
(0)
Need info from Maryland First Fivers...
-
Tulsa Dave
10:32:15 07/30/06
(6)
Re: Need info from Maryland First Fivers...
-
Pete
19:54:17 07/31/06
(1)
You've got mail...
-
Tulsa Dave
16:30:43 08/01/06
(0)
Re: Need info from Maryland First Fivers...
-
NOVA paige
10:09:41 07/31/06
(1)
All of them will have to undergo emissions...
-
Tulsa Dave
13:17:19 07/31/06
(0)
Re: Need info from Maryland First Fivers...
-
Carlos
14:43:25 07/30/06
(1)
Re: Need info from Maryland First Fivers...
-
justin
11:08:24 08/03/06
(0)
Mine joined dead odo club. Thanks for FAQ . Has
-
don in nj
05:46:07 07/30/06
(1)
Re: Mine joined dead odo club. Thanks for FAQ . H
-
Mike W.
12:00:01 07/30/06
(0)
I witnessed these in action!
-
Matt C
05:28:41 07/30/06
(1)
we use them all the time, there $300+ pair
-
Fadi A Faisal
10:32:03 07/30/06
(0)
Free BMW Magazine Collection in So Cal
-
Jeff F
22:38:22 07/29/06
(0)
81 M535 tranny question
-
Matt C
19:19:51 07/29/06
(5)
Easy
-
Mike W.
20:37:53 07/29/06
(4)
Re: Easy
-
Matt C
05:17:05 07/30/06
(2)
close ratio box
-
Adam W. in Chicago
19:23:39 07/30/06
(0)
Sport is 265/5
-
Mike W.
12:02:16 07/30/06
(0)
Re: Easy
-
Ronald
03:04:54 07/30/06
(0)
It's finally here! Lee's 81 M535i is now mine.
-
Matt C
19:13:59 07/29/06
(2)
Great to hear, when do we get pictures?! (nt)
-
Adam W. in Chicago
12:22:12 07/30/06
(1)
Re: Great to hear, when do we get pictures?! (nt)
-
Matt C
16:59:29 07/30/06
(0)
Need Piston Help!!! (Euro Motor)
-
JoshInAtlanta
16:40:42 07/29/06
(20)
Here's a solution for you... all the parts
-
Lars Olbimmerguy
20:30:26 07/30/06
(0)
Here's just one post from e24 board that I recall
-
Lars
11:07:49 07/30/06
(1)
That last paragraph was My Suggestion. I can't
-
Lars Olbimmerguy
11:12:51 07/30/06
(0)
Volkswagen Pistons????
-
Lars Olbimmerguy
10:57:17 07/30/06
(0)
depends on overbore, block condition
-
Adam W. in Chicago
06:13:22 07/30/06
(0)
Believe it or not
-
Justin in C'ville
21:16:44 07/29/06
(3)
ah - email addy, click for link
-
Justin in C'ville
21:17:36 07/29/06
(2)
Cool!
-
JoshInAtlanta
21:22:54 07/29/06
(1)
I want to know what kind of cleaner he used.
-
Mike Oswald
03:30:45 07/30/06
(0)
need to know the size
-
Sam
17:02:25 07/29/06
(10)
Re: need to know the size
-
JoshInAtlanta
17:11:57 07/29/06
(9)
Re: need to know the size
-
Sam
18:38:11 07/29/06
(8)
Re: need to know the size
-
JoshInAtlanta
19:37:26 07/29/06
(7)
sand blasted the engine???
-
Sam
19:39:53 07/29/06
(6)
Re: sand blasted the engine???
-
JoshInAtlanta
21:05:39 07/29/06
(4)
I can but I cant do anything untill monday
-
Sam
14:00:32 07/30/06
(3)
Re: I can but I cant do anything untill monday
-
JoshInAtlanta
14:03:00 07/30/06
(2)
bad news only place I can get the pistons is the
-
Sam
13:26:37 07/31/06
(1)
Re: bad news only place I can get the pistons is the
-
Josh
18:29:48 08/02/06
(0)
Clean clean clean clean clean
-
Andrew in Calgary
21:02:07 07/29/06
(0)
Parting out four complete e-12's
-
Jeff
14:03:21 07/29/06
(3)
Re: Parting out four complete e-12's
-
Lou in Denver
09:41:38 08/04/06
(0)
Re: misc. needed
-
jimH
14:43:09 07/29/06
(1)
Re: misc. needed
-
GripGreg
16:44:40 08/03/06
(0)
I was serious about reproducing Euro Bumpers....
-
Lars Olbimmerguy
13:30:18 07/29/06
(2)
Re: I was serious about reproducing Euro Bumpers..
-
justin
11:24:20 08/03/06
(0)
Email me Lars... and we can talk? (eom)
-
Frank H
13:54:08 07/29/06
(0)
valve clatter or detonation?
-
BillyDee
13:09:47 07/29/06
(0)
Euro Bumper and BBS front airdam
-
Mike Oswald
12:29:23 07/29/06
(4)
Re: Euro Bumper and BBS front airdam
-
Velocewest
01:31:21 08/01/06
(0)
Re: Euro Bumper and BBS front airdam
-
Trevor M
14:08:50 07/29/06
(0)
Can have euro bumper blades replicated.....
-
Lars Olbimmerguy
13:19:14 07/29/06
(1)
Otherwise... keep eye out for used sets....
-
Lars Olbimmerguy
13:25:08 07/29/06
(0)
Yes I bought it.
-
Frank H
11:05:45 07/29/06
(4)
Re: Yes I bought it.
-
Jim
14:01:41 07/29/06
(0)
Re: Yes you bought it.
-
Trevor M
12:51:02 07/29/06
(0)
Congrats!
-
Andrew in Calgary
12:36:42 07/29/06
(