Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XIII

(2001/07/01 - 2001/11/12)

---

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• my 528 still needs good home - adam 18:12:02 11/12/01 (0)
• Sounds like a great parts car. - Trubey 17:54:38 11/12/01 (0)
• 528i for sale for 2300$ - adam 17:47:25 11/12/01 (0)
• Gas mileage with 3.5 liter L-Jet - Jim Davis 17:44:10 11/12/01 (6)
  • Re: Gas mileage with 3.5 liter L-Jet - Kaveman 20:23:36 11/12/01 (0)
  • Re: Gas mileage with 3.5 liter L-Jet - Frank H 20:10:28 11/12/01 (0)
  • Should be similar to stock 2.8 - Eric 19:54:34 11/12/01 (0)
  • Re: Gas mileage with 3.5 liter L-Jet - Luke 18:26:22 11/12/01 (1)
    • Did the conversion - Luke 18:32:55 11/12/01 (0)
  • Re: Gas mileage with 3.5 liter L-Jet - Luke 18:26:05 11/12/01 (0)
• Head replacement follow-up - Mr. Coffey 16:35:41 11/12/01 (0)
• Has anyone used a Motronic intake manifold on.. - TCD 15:56:44 11/12/01 (1)
  • Re: Has anyone used a Motronic intake manifold on.. - Wietse 17:23:08 11/12/01 (0)
• ERIC..did you get your spring prob resolved?? - Scott 15:29:50 11/12/01 (1)
  • Re: ERIC..did you get your spring prob resolved?? - Eric 16:39:33 11/12/01 (0)
• running rich. - Chris barnard. 14:04:18 11/12/01 (1)
  • Re: running rich. - Peter Florance 14:42:37 11/12/01 (0)
• Sprins and struts..got em? - Steve Chandler 06:44:51 11/12/01 (14)
  • Re: Sprins and struts..got em? - Eric 13:28:55 11/12/01 (0)
  • Re: Springs and struts ???? - Don Daynes 11:29:48 11/12/01 (0)
  • Too low? - Sam R. 11:19:09 11/12/01 (0)
  • Too low? - Sam R. 11:18:53 11/12/01 (7)
    • Re: Too low? - Sam R. 11:33:30 11/12/01 (1)
      • problem detected, you are not owner of this album - FLIP 11:43:29 11/12/01 (0)
    • your link doesn't work - FLIP 11:22:41 11/12/01 (4)
      • Re: your link doesn't work - Don Daynes 11:45:26 11/12/01 (3)
        • I'm a NS 4.72 user I refuse to bow to MS dominance - FLIP 12:26:25 11/12/01 (2)
          • got it to work, similar issues to yahoo geocities - FLIP 13:01:09 11/12/01 (0)
          • Re: I'm a NS 4.72 user I refuse to bow to MS dominance - Scott 12:58:08 11/12/01 (0)
  • Re: Sprins and struts..got em? - STAN 08:33:01 11/12/01 (0)
  • Re: Sprins and struts..got em? ...Springs rather.. - Steve Chandler 06:45:29 11/12/01 (1)
    • Re: Sprins and struts..got em? ...Springs rather.. - mikey 15:55:47 11/12/01 (0)
• 1998 528i bmw - arnoldo kramer. 22:23:42 11/11/01 (2)
  • Re: 1998 528i bmw - Troy Rudolph (Webmaster) 00:04:48 11/12/01 (0)
  • Re: 1998 528i bmw - J. Seinfeld 23:14:04 11/11/01 (0)
• Still not idling - Dennis 18:10:21 11/11/01 (6)
  • timing? - Peter Florance 19:54:33 11/12/01 (0)
  • Re: Still not idling - Don Daynes 11:17:42 11/12/01 (0)
  • Re: Still not idling - Steve Chandler 06:28:54 11/12/01 (1)
    • Good Point: Check Fuel Relay! - Collins 17:21:10 11/12/01 (0)
  • Re: Still not idling - Kaveman 21:45:23 11/11/01 (0)
  • Re: Still not idling - Robert Bondi 21:36:50 11/11/01 (0)
• Check your tire pressure - Peter Florance 16:33:32 11/11/01 (4)
  • very good advice, more - FLIP 09:49:35 11/12/01 (0)
  • Re: Check your tire pressure - Dave Spencer 20:11:30 11/11/01 (1)
    • Re: Check your tire pressure - mikey 22:23:52 11/11/01 (0)
  • Re: Check your tire pressure - mikey 18:04:56 11/11/01 (0)
• Need seats... - Dave Spencer 12:31:23 11/11/01 (2)
  • Seats for 5 Series --- have a set - Jeff C 17:33:07 11/11/01 (1)
    • Check you email... - Dave Spencer 21:00:32 11/11/01 (0)
• Back from 2nd driver's school - Peter Florance 20:32:02 11/10/01 (21)
  • Re: Back from 2nd driver's school - Kaveman 10:36:30 11/11/01 (2)
    • Re: Back from 2nd driver's school - Eric 23:29:53 11/11/01 (0)
    • Re: Back from 2nd driver's school - Peter Florance 16:27:52 11/11/01 (0)
  • Re: Back from 2nd driver's school - Eric 01:43:12 11/11/01 (9)
    • Re: Back from 2nd driver's school - Peter Florance 11:17:43 11/11/01 (8)
      • Re: Back from 2nd driver's school - Eric 23:22:29 11/11/01 (7)
        • Re: Back from 2nd driver's school - Peter Florance 08:42:45 11/12/01 (6)
          • Re: Back from 2nd driver's school - Eric 13:45:09 11/12/01 (5)
            • Re: Back from 2nd driver's school - Peter Florance 14:37:17 11/12/01 (4)
              • Both good and bad - Eric 15:07:57 11/12/01 (3)
                • bigger sway bars? - Peter Florance 15:27:29 11/12/01 (1)
                  • Re: bigger sway bars? - Eric 16:43:35 11/12/01 (0)
                • bigger sway bars - Peter Florance 15:27:23 11/12/01 (0)
  • Re: Back from 2nd driver's school - Karl 23:36:49 11/10/01 (0)
  • Re: Back from 2nd driver's school - T. Han 22:15:19 11/10/01 (0)
  • Re: Back from 2nd driver's school - Mark 20:57:29 11/10/01 (5)
    • Re: Back from 2nd driver's school - Peter Florance 11:22:47 11/11/01 (1)
      • Re: Back from 2nd driver's school - Mark 12:05:59 11/11/01 (0)
    • Re: Back from 2nd driver's school - T. Han 22:01:47 11/10/01 (0)
    • Mark your right - Scott 21:50:23 11/10/01 (1)
      • Re: Mark your right - Double pivot front end 23:55:26 11/10/01 (0)
• 77 e12 w/ Bav. exhaust , blk leather, A/C FS 500- - Jeff 18:58:37 11/10/01 (1)
  • this sounds like a great deal! - Peter Florance 13:11:57 11/11/01 (0)
• idle problems - Dennis 18:20:36 11/10/01 (5)
  • Re: idle problems - Don Daynes 01:44:53 11/11/01 (0)
  • Re: idle problems - Peter Florance 20:33:10 11/10/01 (3)
    • Re: idle problems - dennis 23:24:21 11/10/01 (1)
      • Re: idle problems - Peter Florance 11:19:25 11/11/01 (0)
    • Re: idle problems - dennis 23:24:17 11/10/01 (0)
• Stuck window and locks. - T. Han 15:52:01 11/10/01 (2)
  • Re: Stuck window and locks. - karl 23:02:05 11/10/01 (1)
    • Re: Stuck window and locks. - T. Han 14:32:45 11/11/01 (0)
• superfund low - mikey 13:19:57 11/10/01 (0)
• Paint... Need moral support (sorta longish) - Dave Spencer 13:15:51 11/10/01 (14)
  • Re: Paint... Need moral support (sorta longish) - Steve Chandler 06:39:10 11/12/01 (0)
  • Re: Paint... Need moral support (sorta longish) - Randy McCafferty 19:38:41 11/11/01 (0)
  • Re: Paint... Need moral support (sorta longish) - Chuck Denson 17:08:02 11/11/01 (0)
  • Have him raise window seals before spray. - texastim 09:33:23 11/11/01 (3)
    • Heavy guage WeedEater cords Works Good - Lars PNW 81_528i 10:57:30 11/11/01 (2)
      • Great idea! - Dave Spencer 12:23:41 11/11/01 (1)
        • Old idea, but so am I... Weedeater idea fairly new - Lars PNW 81_528i 20:06:23 11/11/01 (0)
  • If it was a valuable car, I would say NO, But - Lars PNW 81_528i 20:50:28 11/10/01 (0)
  • Re: Paint... Need moral support (sorta longish) - Michael Longeneker 16:14:31 11/10/01 (0)
  • Re: Paint... Need moral support (sorta longish) - T. Han 16:07:59 11/10/01 (0)
  • Re: Paint... Need moral support (sorta longish) - Troy Rudolph 13:44:47 11/10/01 (3)
    • Point taken, but... - Dave Spencer 15:13:53 11/10/01 (2)
      • sounds good, but buyer beware... - FLIP 12:34:13 11/12/01 (0)
      • Re: Point taken, but... - Troy Rudolph 19:18:53 11/10/01 (0)
• Wayback Machine Part 2! Tony returns! - Greg 12:56:58 11/10/01 (8)
  • Oh My God! The board even works!!! TROY! - Greg 12:58:26 11/10/01 (7)
    • actually, this link is better - Greg 13:02:00 11/10/01 (6)
      • wow, Troy is the only name I recognize,5yrs, huh? - Scott 19:42:00 11/10/01 (4)
        • jeez, 1997, huh? Way back in the day! - FLIP 14:06:49 11/12/01 (0)
        • Re: wow, Troy is the only name I recognize,5yrs, huh? - Lenny D. 21:56:54 11/11/01 (0)
        • Hey, what about me.... - Greg 20:42:23 11/10/01 (1)
          • Re: Hey, what about me.... - Scott 21:54:42 11/10/01 (0)
      • wow, Troy is the only name I recognize,5yrs, huh? - Scott 19:41:57 11/10/01 (0)
• Remove door trim - T. Han 22:06:27 11/09/01 (0)
• Grassroots E12 dyno results - Bill Barrett 19:30:18 11/09/01 (2)
  • K&N Cone? - Eric 19:38:15 11/09/01 (1)
    • Re: K&N Cone?...Yes - Bill Barrett 18:56:43 11/10/01 (0)
• 1972 Bavaria for sale - Eric 18:25:40 11/09/01 (0)
• Any experience with VW (Mahle) Pistons - Lars 81_528i PNW 18:20:34 11/09/01 (4)
  • Thank you... Great Info!! - Lars PNW 81_528i 01:08:45 11/10/01 (0)
  • Re: Any experience with VW (Mahle) Pistons - Don Daynes 23:38:38 11/09/01 (0)
  • Here's some info that Don sent me - Troy Rudolph 20:46:50 11/09/01 (0)
  • paging Don Daynes - Peter Florance 18:46:18 11/09/01 (0)
• PAGING MR. BONDI...Please come to the front desk.. - Scott 18:16:18 11/09/01 (2)
  • Re: PAGING MR. BONDI...Please come to the front desk.. - Robert Bondi 04:03:39 11/10/01 (1)
    • Re: PAGING MR. BONDI...Please come to the front desk.. - Scott 22:09:32 11/10/01 (0)
• forgive me, for i have sinned... - ...tom 17:58:07 11/09/01 (8)
  • Partial Forgiveness?? That's like Catholicism..... - Lars PNW 81_528i 08:54:06 11/10/01 (1)
    • Re: Partial Forgiveness?? That's like Catholicism..... - Frank H 11:24:05 11/10/01 (0)
  • You will be partially forgiven if - Eric 23:13:00 11/09/01 (2)
    • no, it's an '85, but... - ...tom 05:15:19 11/10/01 (1)
      • Re: no, it's an '85, but... - mikey 12:13:22 11/10/01 (0)
  • Re: forgive me, for i have sinned... - M635 in Calgary 19:34:07 11/09/01 (0)
  • Re: forgive me, for i have sinned... - Bob Iverach 19:27:01 11/09/01 (0)
  • Sinned...you scored!! - Scott 18:03:42 11/09/01 (0)
• for sale e-12/3.5 euro - mark 16:14:50 11/09/01 (0)
• I got a 1980 restored bmw 528i - Justin 15:30:11 11/09/01 (0)
• Rear Subframe Info, Pics and Measurements? - Paul 13:27:57 11/09/01 (0)
• wheel/tire question - Matthew 13:19:34 11/09/01 (2)
  • Re: wheel/tire question - Karl 23:24:17 11/10/01 (0)
  • Re: wheel/tire question - jim 21:17:14 11/09/01 (0)
• Parts Car - Don Daynes 13:09:34 11/09/01 (0)
• Alpina aux fuel tank FS - FLIP 12:59:47 11/09/01 (3)
  • I think its the same guy I got my parts from... - Scott 22:04:17 11/10/01 (0)
  • Re: Alpina aux fuel tank FS - Frank H 17:30:54 11/09/01 (0)
  • Re: Alpina aux fuel tank FS - Sam Schultz 16:17:25 11/09/01 (0)
• Dog-Leg 565/5-Where are parts? - Jeff Campbell 20:26:11 11/08/01 (6)
  • BMW can supply everything - james 02:56:33 11/10/01 (5)
    • Thanks James - but please read,, - Jeff C 11:42:04 11/10/01 (4)
      • BMW can't be botherered to sell you the parts - James 14:17:35 11/10/01 (3)
        • Carpet? - Dave Spencer 15:19:24 11/10/01 (2)
          • here are the carpet numbers - James 02:11:39 11/11/01 (0)
          • James-You the Man - Jeff C. 18:02:31 11/10/01 (0)
• Need Kidney's! - Sam R. 20:25:56 11/08/01 (1)
  • Re: Need Kidney's! - Dave Spencer 20:31:49 11/08/01 (0)
• Pristine e12 in Denver, have to let it go. - Lee Wareham 18:57:59 11/08/01 (10)
  • Fine Car! Every pic a testament to appearance - Lars PNW 81_528i 17:06:38 11/12/01 (0)
  • Photo album of my e12 FS - Lee Wareham 16:52:51 11/10/01 (0)
  • Re: Pristine e12 in Denver, have to let it go. - Lee Wareham 10:52:13 11/09/01 (1)
    • Re: Pristine e12 in Denver, have to let it go. - T.Han 09:37:40 11/10/01 (0)
  • Beautiful car. How much are you asking? - Randy McCafferty 07:25:04 11/09/01 (3)
    • Re: Beautiful car. How much are you asking? - Lee Wareham 11:46:53 11/09/01 (2)
      • Re: Beautiful car. How much are you asking? - Randy 12:42:42 11/09/01 (1)
        • Mileage: 155k - Lee Wareham 12:58:15 11/09/01 (0)
  • let me try it - Peter Florance 06:25:16 11/09/01 (0)
  • Re: Pristine e12 in Denver, have to let it go. - JT 05:43:21 11/09/01 (0)
• My e12 was stolen! - Jeremy T 18:14:56 11/08/01 (8)
  • I would give you a great deal on my 5 - adam 17:52:01 11/12/01 (0)
  • your other E12? - Robert Bondi 22:38:54 11/08/01 (0)
  • Re: My e12 was stolen! - T. Han 21:31:18 11/08/01 (0)
  • Re: My e12 was stolen! (more) - Jeremy T 21:20:27 11/08/01 (0)
  • Re: My e12 was stolen! - Luke 20:42:55 11/08/01 (0)
  • Re: My e12 was stolen! - Sam R. 19:09:08 11/08/01 (2)
    • Re: My e12 was stolen! - Dave Spencer 20:27:31 11/08/01 (0)
    • Re: My e12 was stolen! - Scott 19:30:58 11/08/01 (0)
• Miss above 4g Fuel? Spark? - Trubey 17:45:42 11/08/01 (0)
• Promotion of E12 on So. Cal. Radio (long) - Eric 15:51:47 11/08/01 (4)
  • Why can't that happen in the midwest? - Luke 20:48:33 11/08/01 (0)
  • Once Again...Those Cali guys get the good stuff... - Scott 16:03:59 11/08/01 (2)
    • Re: Once Again...Those Cali guys get the good stuff... - Dave Spencer 20:36:25 11/08/01 (0)
    • Re: Once Again...Those Cali guys get the good stuff... - Dave Spencer 20:36:16 11/08/01 (0)
• Will a 740I V8 fit ?it's almost the same$$$ - Scott 14:49:56 11/08/01 (6)
  • Re: Will a 740I V8 fit ?it's almost the same$$$ - Troy Rudolph 15:16:33 11/08/01 (5)
    • Paging MR. WIETSE... - Scott 15:50:36 11/08/01 (4)
      • Put the cutting torch down slowly.... - Wietse 21:59:13 11/08/01 (3)
        • Re: Put the cutting torch down slowly.... - Mark 22:57:58 11/08/01 (2)
          • Suburbans, NASCAR, and 750hp - Wietse 09:48:31 11/09/01 (1)
            • Re: Suburbans, NASCAR, and 750hp - Mark 22:37:18 11/09/01 (0)
• '77 520i Door removal - Owerflow 13:32:22 11/08/01 (2)
  • Re: '77 520i Door removal - Jeff C 14:28:53 11/08/01 (1)
    • Re: '77 520i Door removal - Owerflow 02:25:51 11/09/01 (0)
• dashboard replacement, advice? - FLIP 10:56:55 11/08/01 (14)
  • Re: dashboard replacement, advice? - Bob Iverach 19:39:56 11/08/01 (2)
    • and the windshield....? - Peter Florance 19:44:45 11/08/01 (1)
      • Re: and the windshield....? - bob Iverach 19:55:05 11/09/01 (0)
  • FWIW... Flip... Todd Kenyon Dash Rep Page - Lars PNW 81_528i 16:18:42 11/08/01 (3)
    • Leatherique - Peter Florance 17:20:38 11/08/01 (2)
      • Re: Leatherique - T. Han 19:07:05 11/08/01 (1)
        • everyone is on the web these days... - Peter Florance 19:45:57 11/08/01 (0)
  • dash maintenance - Robert Bondi 16:01:17 11/08/01 (0)
  • Preventing Cracks - Eric 13:09:17 11/08/01 (1)
    • Re: Preventing Cracks - T. Han 14:28:59 11/08/01 (0)
  • YUK! you must really like that car! - Randy McCafferty 13:00:25 11/08/01 (1)
    • Some nice ones in CA - Kevin McD 13:52:09 11/08/01 (0)
  • Re: dashboard replacement, advice? - Luke 11:20:11 11/08/01 (1)
    • Re: dashboard replacement, advice? - Jeff C 12:07:13 11/08/01 (0)
• new 3.5 - Mark 03:37:27 11/08/01 (4)
  • It needs a Dyno Test ! - Peter Claassen 18:09:05 11/08/01 (0)
  • Which 3.5? - Eric 13:01:08 11/08/01 (0)
  • Re: new 3.5 - Robert Purington 11:37:42 11/08/01 (1)
    • e12 M535i - Mark 18:55:30 11/08/01 (0)
• 85 Getrag 5 Speed - Kaveman 21:44:15 11/07/01 (1)
  • Re: 85 Getrag 5 Speed - Troy Rudolph 22:38:16 11/07/01 (0)
• How to set timing-flywheel indexed incorrectly? - Bill Barrett 20:48:40 11/07/01 (11)
  • Re: How to set timing-flywheel indexed incorrectly? - Karl 16:53:18 11/09/01 (0)
  • Re: Thank you for the great response and input - Bill Barrett 20:31:13 11/08/01 (0)
  • Re: How to set timing-flywheel indexed incorrectly? - Mike V. 09:47:23 11/08/01 (0)
  • Are you asking this....? - Jeff C 08:30:41 11/08/01 (2)
    • Re: Are you asking this....? - Peter Florance 08:54:34 11/08/01 (0)
    • Re: Are you asking this? - Bill Barrett 08:53:43 11/08/01 (0)
  • Re: How to set timing-flywheel indexed incorrectly? - David B 23:32:08 11/07/01 (1)
    • Re: How to set timing-flywheel indexed incorrectly? - Mr. Coffey 23:34:27 11/07/01 (0)
  • Re: How to set timing-flywheel indexed incorrectly? - Mr. Coffey 23:31:38 11/07/01 (0)
  • Re: How to set timing-flywheel indexed incorrectly? - Kaveman 23:23:47 11/07/01 (0)
  • Re: How to set timing-flywheel indexed incorrectly? - Sam R. 23:13:11 11/07/01 (0)
• Zender spoiler - stewart 20:32:09 11/07/01 (1)
  • Re: Zender spoiler - Kaveman 20:40:12 11/07/01 (0)
• Dyno day - The Rev. Brendan X 20:29:51 11/07/01 (3)
  • Re: Dyno day - TCD 22:27:23 11/07/01 (0)
  • Re: Dyno day - Frank H 20:41:54 11/07/01 (1)
    • Re: Dyno day - The Rev . Brendan X 19:32:47 11/08/01 (0)
• Australian cars - US or Euro spec? - Adam B 16:38:32 11/07/01 (1)
  • Re: Australian cars - US or Euro spec? - Mark 00:49:44 11/08/01 (0)
• Help! Alternator Upgrade newer 528i style to 530i - Gilbert S. 16:15:45 11/07/01 (8)
  • Unscrew the old one, install the new one - Chris 17:27:21 11/07/01 (4)
    • Re: Unscrew the old one, install the new one - Gilbert S. 00:02:44 11/08/01 (3)
      • I like this idea, but need more info - Peter Florance 06:28:06 11/08/01 (2)
        • Re: I like this idea, but need more info - Chris 13:09:25 11/10/01 (1)
          • Re: I like this idea, but need more info - Gilbert S. 22:38:37 11/10/01 (0)
  • Re: Help! Alternator Upgrade newer 528i style to 530i - Peter Florance 16:55:13 11/07/01 (2)
    • Re: Help! Alternator Upgrade newer 528i style to 530i - Gilbert S 17:05:08 11/07/01 (0)
    • Re: Help! Alternator Upgrade newer 528i style to 530i - Gilbert S 17:05:00 11/07/01 (0)
• Speed - o - Fix might be here soon! - Jeff C. 09:27:39 11/07/01 (9)
  • Material that will be used... - Jeff C 08:19:53 11/08/01 (1)
    • Space Cadet... - Dave Spencer 11:26:19 11/08/01 (0)
  • Re: Speed - o - Fix, bronze or brass?? - David B 23:53:33 11/07/01 (0)
  • Gear should be plastic - Jeff 21:19:37 11/07/01 (0)
  • Re: Speed - o - Fix might be here soon! - Chris Hollis 14:46:39 11/07/01 (0)
  • Re: Speed - o - Fix might be here soon! - T. Han 10:16:04 11/07/01 (1)
    • Re: Speed - o - Fix might be here soon! - Troy Rudolph 15:16:01 11/07/01 (0)
  • Re: Speed - o - Fix might be here soon! - Dave Spencer 10:00:31 11/07/01 (1)
    • I wont tell if you wont. - Sam Schultz 13:33:00 11/07/01 (0)
• e12 on TV - Chuck Denson 08:27:01 11/07/01 (0)
• Webbers - T. Han 22:32:57 11/06/01 (2)
  • Re: Webbers - TCD 22:45:11 11/06/01 (1)
    • Re: Webbers - T. Han 23:03:08 11/06/01 (0)
• Odometer Stopped - John in So. CA 22:30:18 11/06/01 (2)
  • Re: Odometer Stopped - Randy McCafferty 08:52:23 11/07/01 (0)
  • Re: Odometer Stopped - T. Han 23:26:59 11/06/01 (0)
• 530i Won't Start/Service Manual - Tim del Villar 22:15:39 11/06/01 (3)
  • Re: 530i Won't Start/Service Manual if you're a ne - Dennis 19:01:08 11/07/01 (0)
  • Re: 530i Won't Start/Service Manual - Randy McCafferty 08:56:09 11/07/01 (0)
  • Re: 530i Won't Start/Service Manual - Peter Florance 06:35:20 11/07/01 (0)
• Bilstein Rebuild - Gene S 20:23:35 11/06/01 (3)
  • Carl Nelson is Selling Rear Bilsteins for $70 - Chris 01:40:03 11/07/01 (0)
  • Re: Bilstein Rebuild - Troy Rudolph 22:11:36 11/06/01 (0)
  • Re: Bilstein Rebuild - Frank H 20:50:08 11/06/01 (0)
• 1985 528i??? - Now an e28 owner... or am I? 20:03:11 11/06/01 (10)
  • The Skinny.. - Kevin McD 08:05:40 11/08/01 (0)
  • Re: 1985 528i??? - Eric Quon 23:42:04 11/06/01 (0)
  • Re: 1985 528i??? - Kaveman 20:55:53 11/06/01 (1)
    • Re: 1985 528i??? - Kevin McD 21:05:43 11/06/01 (0)
  • Re: 1985 528i??? - Peter Florance 20:16:12 11/06/01 (5)
    • Re: 1985 528i??? - Frank H 20:46:24 11/06/01 (0)
    • lotsa stuff came with it... - Kevin McD of the e12 Gallery 20:41:25 11/06/01 (3)
      • CD Download - Karl 21:33:53 11/06/01 (1)
        • Re: CD Download - Frank H 21:39:25 11/06/01 (0)
      • Re: lotsa stuff came with it... - Frank H 20:53:44 11/06/01 (0)
• Peter Florance - rev light switch? - Robert Bondi 19:38:06 11/06/01 (3)
  • Re: Peter Florance - rev light switch? - Peter Florance 20:13:54 11/06/01 (2)
    • Re: Peter Florance - rev light switch? - T. Han 22:14:48 11/06/01 (1)
      • Re: Peter Florance - rev light switch? question - dennis 23:32:28 11/10/01 (0)
• My 1980 528i Must Find A Good Home - Mike Bilger 19:27:35 11/06/01 (0)
• the wayback machine - Greg 18:55:08 11/06/01 (0)
• Air in the cooling system - Tara Knowles 16:17:00 11/06/01 (5)
  • gage wierdness - Karl 21:41:22 11/06/01 (0)
  • Re: Air in the cooling system - Randy Clark 21:20:14 11/06/01 (0)
  • Re: Air in the cooling system - Don Daynes 20:12:01 11/06/01 (0)
  • Re: Air in the cooling system - T. Han 16:23:07 11/06/01 (1)
    • SOUNDS LIKE GUAGE HAS GROUNDING PROBLEMS - COLLINS 17:20:51 11/06/01 (0)
• A quart and a half... - T. Han 16:16:52 11/06/01 (3)
  • Maybe, . . . Maybe Not - John in So CA 21:21:31 11/06/01 (0)
  • Oil Can of YOUTH? - Sam R. 17:38:22 11/06/01 (1)
    • Re: Oil Can of YOUTH? - T. Han 22:09:01 11/06/01 (0)
• FS: 77 530i in PA near me - Greg 15:37:49 11/06/01 (0)
• Parts sources - T.Han 14:30:30 11/06/01 (0)
• 740il wheels on E-bay - Greg 13:12:17 11/06/01 (0)
• WTB: Dead, dying, or diseased E-12 five speeds. - Dieter 12:38:17 11/06/01 (0)
• E12 FS -- SCHWEEEEEEEEEEET! - Now an e28 owner 12:37:10 11/06/01 (2)
  • I don't understand why? - FLIP 12:56:59 11/06/01 (1)
    • Re: I don't understand why? - Clarification... 13:16:39 11/06/01 (0)
• Found a 530I automatic for sale NEED ADVICE - Patrick Goss 11:48:42 11/06/01 (7)
  • Price could be running car... - Lars PNW 81_528i 16:40:21 11/06/01 (2)
    • Re: Price could be running car... - Tim del Villar 22:39:14 11/06/01 (1)
      • Pictures online, more to come.... - Patrick Goss 08:05:16 11/07/01 (0)
  • Re: Found a 530I automatic for sale NEED ADVICE - Chuck Denson 12:29:11 11/06/01 (3)
    • Not true about the cost of the exhuast, - Martyn Smith 08:44:48 11/07/01 (1)
      • Re: Not true about the cost of the exhuast, - Patrick Goss 08:58:52 11/07/01 (0)
    • Re: Found a 530I automatic for sale NEED ADVICE - Patrick Goss 15:28:12 11/06/01 (0)
• 530i, 76, Running High idle - Bernie 11:47:50 11/06/01 (1)
  • Re: 530i, 76, Running High idle - Peter Florance 12:15:17 11/06/01 (0)
• Engine is going south...fast... - Scott 08:34:46 11/06/01 (16)
  • Re: Engine is going south...fast... - Karl 22:02:20 11/06/01 (0)
  • Bavarian or American Motor Werks? - John in So CA 21:51:47 11/06/01 (3)
    • John, 160mph? I don't think so!! - TCD 21:59:45 11/06/01 (2)
      • Well . . . the point is . . . - John in So CA 01:36:14 11/07/01 (0)
      • Ok, he overestimated by 20mph...M535i = 140mph top - Frank H 22:04:22 11/06/01 (0)
  • Oh the tradionalist? - TCD 20:33:23 11/06/01 (0)
  • Re: Engine is going south...fast... - Harry 15:59:54 11/06/01 (3)
    • Re: Engine is going south...fast... - Scott 16:20:39 11/06/01 (2)
      • Re: Engine is going south...fast... - Troy Rudolph 16:26:53 11/06/01 (1)
        • Re: Engine is going south...fast... - Scott 16:30:26 11/06/01 (0)
  • Re: Engine is going south...fast... - Sam Schultz 08:53:59 11/06/01 (5)
    • Re: Engine is going south...fast... - Scott 10:28:22 11/06/01 (4)
      • Re: Engine is going south...fast... - Frank H 21:07:12 11/06/01 (0)
      • more engine opinions - Robert Bondi 19:31:30 11/06/01 (0)
      • Re: Engine is going south...fast... - Sam Schultz 16:50:24 11/06/01 (1)
        • Re: Engine is going south...fast... - Scott 17:41:06 11/06/01 (0)
• Bad business at Maximillian? - Eric 00:47:47 11/06/01 (19)
  • Re: get spring specs - David B 23:29:39 11/06/01 (0)
  • Thank you all - Eric 15:28:06 11/06/01 (0)
  • Re: Bad business at Maximillian? - FLIP 11:01:49 11/06/01 (1)
    • Re: Bad business at Maximillian? - Bill Bowes 20:54:52 11/06/01 (0)
  • Re: Bad business at Maximillian? - Kaveman 10:24:15 11/06/01 (1)
    • Re: Bad business at Maximillian? - Patrick 06:49:06 11/07/01 (0)
  • Here's my $.02 - Bill Bowes 06:17:43 11/06/01 (5)
    • Re: Here's my $.02 - Frank H 21:21:09 11/06/01 (0)
    • here's $.01 back change - Peter Florance 07:57:17 11/06/01 (3)
      • Uh.... YEAH! - Sam R. 09:23:57 11/06/01 (2)
        • Question for Sam R... - Mr. Coffey 13:08:29 11/06/01 (1)
          • Re: Question for Sam R... - Sam R. 17:26:18 11/06/01 (0)
  • Re: Bad business at Maximillian? - Sam R. 01:45:48 11/06/01 (1)
    • Re: Bad business at Maximillian? - Mark 04:06:44 11/06/01 (0)
  • Re: Bad business at Maximillian? - Mark 01:33:16 11/06/01 (4)
    • Highly unlikely - Eric 15:41:53 11/06/01 (0)
    • Re: Bad business at Maximillian? - Peter Florance 05:57:30 11/06/01 (2)
      • Re: Bad business at Maximillian? - Eric 15:23:26 11/06/01 (1)
        • Re: Bad business at Maximillian? - Peter Florance 18:56:57 11/06/01 (0)
• CG on engine when using a hoist - Jeff C 19:28:50 11/05/01 (4)
  • if you don't care about the car... - ...tom 16:02:40 11/06/01 (0)
  • Re: CG on engine when using a hoist - Kaveman 23:11:55 11/05/01 (0)
  • Re: CG on engine when using a hoist (long) - Robert Bondi 22:29:38 11/05/01 (1)
    • Re: CG on engine when using a hoist (long) - Jeff C 09:08:13 11/06/01 (0)
• Brake noise - T. Han 19:17:17 11/05/01 (2)
  • Re: Brake noise - Peter Florance 19:33:05 11/05/01 (1)
    • Re: Brake noise - T. Han 14:16:07 11/06/01 (0)
• Thermostats - T. Han 19:13:23 11/05/01 (0)
• FS: 015 Distributor. - Kaveman 17:52:36 11/05/01 (2)
  • Re: FS: 015 Distributor. - Robert Purington 11:58:34 11/06/01 (1)
    • Re: FS: 015 Distributor. - Kaveman 14:58:10 11/06/01 (0)
• Door/window chrome trim - T. Han 15:37:34 11/05/01 (2)
  • Re: Door/window chrome trim - Bob Iverach 17:45:17 11/05/01 (1)
    • Re: Door/window chrome trim - T. Han 19:08:20 11/05/01 (0)
• '81euro 635csi motor and tranny for sale! - adam 15:32:01 11/05/01 (0)
• Anyone install a MSD 6A ingintion on a E12 - Gilbert S. 15:31:38 11/05/01 (1)
  • Re: Anyone install a MSD 6A ingintion on a E12 - Peter Florance 16:08:05 11/05/01 (0)
• heater wat valve control fixed but now running hot - Steve Chandler 15:31:25 11/05/01 (4)
  • Re: heater wat valve control fixed but now running hot - Don Daynes 16:52:25 11/05/01 (3)
    • Re: heater wat valve control fixed but now running hot - Steve Chandler 07:08:05 11/06/01 (2)
      • Bleeding cooling system - Don Daynes 11:02:17 11/06/01 (1)
        • Re: Bleeding cooling system - Steve Chandler 16:17:05 11/06/01 (0)
• 81 528i For sale to good home only - adam 15:27:23 11/05/01 (3)
  • Re: 81 528i For sale to good home only - Tunaoue 22:23:13 11/06/01 (1)
    • Re: 81 528i For sale to good home only - adam 14:44:59 11/07/01 (0)
  • Re: 81 528i For sale to good home only - Luke 00:29:40 11/06/01 (0)
• AFM/Oil Change - Chuck Denson 14:20:39 11/05/01 (6)
  • Re: AFM/Oil Change - Kaveman 17:20:47 11/05/01 (0)
  • Re: AFM/Oil Change - Peter Florance 15:04:24 11/05/01 (0)
  • Re: AFM/Oil Change - Bob N. 14:40:54 11/05/01 (3)
    • Re: AFM/Oil Change - Sam Schultz 15:01:17 11/05/01 (2)
      • what if we don't have a 4 gas analyzer? - FLIP 17:00:21 11/05/01 (0)
      • Re: AFM/Oil Change - Chuck Denson 15:34:24 11/05/01 (0)
• M535i steering wheel - FLIP 10:27:23 11/05/01 (3)
  • Should try 320is steering wheel - Eric 15:34:08 11/06/01 (1)
    • Re: Should try 320is steering wheel - FLIP 17:03:35 11/06/01 (0)
  • Re: M535i steering wheel - Luke 14:21:46 11/05/01 (0)
• a/c repair - Mark 02:12:18 11/05/01 (2)
  • Re: a/c repair - Peter Florance 08:34:10 11/05/01 (1)
    • Re: a/c repair - Mark 08:59:18 11/05/01 (0)
• Ignition Probs on L-Jet '81 528i - Adam B 00:16:14 11/05/01 (2)
  • Re: Ignition Probs on L-Jet '81 528i - Peter Florance 19:34:48 11/05/01 (0)
  • Re: Ignition Probs on L-Jet '81 528i - Mikre V. 08:30:45 11/05/01 (0)
• Car of the Month - November - Troy Rudolph (Webmaster) 21:33:00 11/04/01 (4)
  • Nice wheels Fred! - Trubey 21:44:43 11/06/01 (1)
    • Re: Nice wheels Fred! - fred 14:02:52 11/08/01 (0)
  • Very Nice!... I favor white on these cars..... - Lars PNW 81_528i 13:23:38 11/05/01 (0)
  • Re: Car of the Month - November - Mark 07:34:09 11/05/01 (0)
• aux air valve upgrade? - Robert Purington 19:09:20 11/04/01 (1)
  • Re: aux air valve upgrade?(long) - Kaveman 20:39:10 11/04/01 (0)
• Shameless Plug..OEM steering wheel. - Sam R. 10:09:12 11/04/01 (1)
  • Re: Shameless Plug..OEM steering wheel. - Randy Clark 15:57:10 11/04/01 (0)
• DynoDay! - Kaveman 09:53:19 11/04/01 (13)
  • Re: Most E12 HP for the day ! 162.4 - peter claassen 20:05:39 11/05/01 (2)
    • Re: Most E12 HP for the day ! keeping ahead ! - peter claassen 20:17:07 11/05/01 (1)
      • Re: Most E12 HP for the day ! keeping ahead ! - Don Daynes 01:51:19 11/06/01 (0)
  • HP numbers - FLIP 11:00:14 11/05/01 (4)
    • Re: HP numbers - Eric 12:17:38 11/05/01 (1)
      • Re: HP numbers - Correction - Eric 12:21:51 11/05/01 (0)
    • Re: HP numbers - Don Daynes 12:07:40 11/05/01 (0)
    • Re: HP numbers - Kaveman 12:05:09 11/05/01 (0)
  • Re: BTWII - Eric 22:37:03 11/04/01 (0)
  • Re: DynoDay! - Bill Barrett 16:10:42 11/04/01 (0)
  • Re: DynoDay! - Sam R. 10:03:21 11/04/01 (2)
    • I was the turbo E28... - RussC 22:52:02 11/04/01 (0)
    • Re: DynoDay! - Kaveman 10:40:06 11/04/01 (0)
• point gap - Patrick 07:26:34 11/04/01 (1)
  • Re: point gap - Sam R. 09:55:16 11/04/01 (0)
• Placeing a E12 530i engine into a E30 325i... - Vance A. 00:53:46 11/04/01 (4)
  • Re: Placeing a E12 530i engine into a E30 325i... - Frank H 10:54:08 11/04/01 (0)
  • Re: Placeing a E12 530i engine into a E30 325i... - Sam R. 09:50:12 11/04/01 (1)
    • Re: Placeing a E12 530i engine into a E30 325i... - Vance A. 01:25:10 11/05/01 (0)
  • Re: Placeing a E12 530i engine into a E30 325i... - Mark 05:22:26 11/04/01 (0)
• DIY water pump - Mr. BILL 00:31:09 11/04/01 (2)
  • Re: DIY water pump - Don Daynes 23:41:46 11/04/01 (0)
  • OOPS! - Mr. BILL 00:35:41 11/04/01 (0)
• Steering wheel dreaming - Scott 23:43:05 11/03/01 (1)
  • Re: Steering wheel dreaming - Tim del Villar 22:51:51 11/06/01 (0)
• Jangley noise underneath - T. Han 22:17:05 11/03/01 (1)
  • Re: Jangley noise underneath - Don Daynes 13:43:46 11/05/01 (0)
• Back in the Tranny Market - Tom F. 22:12:11 11/03/01 (0)
• Leaks - T. Han 22:11:57 11/03/01 (1)
  • Re: Leaks - Jeff C 07:41:24 11/05/01 (0)
• Left front speaker - T. Han 20:02:24 11/03/01 (3)
  • Re: Left front speaker - Don Daynes 23:28:32 11/04/01 (2)
    • Re: Left front speaker - T Han 08:32:12 11/05/01 (0)
    • Re: Left front speaker - T Han 08:32:03 11/05/01 (0)
• Comments on 320i runner installation - Robert Bondi 19:14:32 11/03/01 (0)
• structural repair - greghill 15:34:21 11/03/01 (3)
  • Re: structural repair - adam 15:12:36 11/04/01 (0)
  • Re: structural repair - adam 15:12:36 11/04/01 (1)
    • Re: structural repair - greghill 09:49:02 11/05/01 (0)
• finishes - greghill 15:22:53 11/03/01 (2)
  • Re: finishes - Troy Rudolph 22:28:48 11/03/01 (1)
    • Re: finishes - Harold 21:27:29 11/04/01 (0)
• Does your strut brace clear the intake manifold? - Bill Barrett 14:35:09 11/03/01 (2)
  • Re: Does your strut brace clear the intake manifold? - Mark Phillips 16:02:11 11/03/01 (0)
  • Re: Does your strut brace clear the intake manifold? - Mark Phillips 16:01:52 11/03/01 (0)
• Wanna trade a 745i motor for my euro 635 motor? - adam 12:34:27 11/03/01 (0)
• new Original M-series book - Frank H 14:58:11 11/02/01 (0)
• lots of fun stuff with google image search - Greg 12:51:32 11/02/01 (1)
  • Re: lots of fun stuff with google image search - Sam Schultz 21:10:27 11/02/01 (0)
• Oil light comes on under 2500 RPM??? - Scott 12:47:12 11/02/01 (17)
  • Re: check the banjo bolts on the oil rail!!!! - Bill Bowes 06:17:50 11/05/01 (0)
  • Re: Oil light comes on, ONE MORE THING... - Scott 19:07:04 11/03/01 (1)
    • clean switch - Robert Bondi 19:29:32 11/03/01 (0)
  • useful observations from an oil gauge fanatic - Robert Bondi 13:54:16 11/02/01 (9)
    • Robert, questions for an oil gauge fanatic? - FLIP 14:52:53 11/02/01 (4)
      • Re: Robert, questions for an oil gauge fanatic? - Robert bondi 20:54:32 11/02/01 (0)
      • Re: Robert, questions for an oil gauge fanatic? - Karl 20:25:08 11/02/01 (0)
      • Re: Robert, questions for an oil gauge fanatic? - Kaveman 20:11:55 11/02/01 (1)
        • Re: Robert, questions for an oil gauge fanatic? - Robert Bondi 21:06:58 11/02/01 (0)
    • oh yeah oil weight - Peter Florance 14:13:55 11/02/01 (3)
      • Is 20w50 just for you CALI folks??? - Martyn Smith 14:46:42 11/02/01 (2)
        • Re: Is 20w50 just for you CALI folks??? - Robert bondi 21:13:25 11/02/01 (1)
          • Re: Is 20w50 just for you CALI folks??? - stewart 13:48:41 11/03/01 (0)
  • Re: Oil light comes on under 2500 RPM??? - Peter Florance 12:55:33 11/02/01 (3)
    • back to scotts question - mikey 00:27:40 11/03/01 (2)
      • Re: back to scotts quest...Hey Mikey! - scott 19:11:19 11/03/01 (1)
        • Re: back to scotts quest...Hey Mikey! - mikey 22:49:43 11/03/01 (0)
• Some unknown parts - Robert Purington 12:10:35 11/02/01 (1)
  • Re: Some unknown parts - Peter Florance 12:54:36 11/02/01 (0)
• Sorry.. need to repost.... E-mails missing - Lars PNW 81_528i 10:42:57 11/02/01 (0)
• Need ECU pin locations... - Ellis 04:26:56 11/02/01 (2)
  • Re: Need ECU pin locations... - Peter Florance 06:09:38 11/02/01 (0)
  • I think FAQ has answered my question - Ellis 05:54:32 11/02/01 (0)
• L-jetronic vs Motronic - Zoltan 02:47:57 11/02/01 (4)
  • Re: L-jetronic vs Motronic - Troy Rudolph 08:25:12 11/02/01 (3)
    • Re: L-jetronic vs Motronic - Zoltan 03:18:20 11/03/01 (1)
      • Re: L-jetronic vs Motronic - Troy Rudolph 13:17:21 11/03/01 (0)
    • Re: L-jetronic vs Motronic - mikey 11:56:18 11/02/01 (0)
• E12 "sport" springs - continuing saga - Eric 02:18:35 11/02/01 (2)
  • Re: E12 "sport" springs - continuing saga - james 08:23:41 11/02/01 (1)
    • Re: E12 "sport" springs - continuing saga - Eric 11:10:43 11/02/01 (0)
• Wood door trim - T. Han 00:45:33 11/02/01 (2)
  • Re: Wood door trim - medfly 10:21:23 11/03/01 (0)
  • Re: Wood door trim - FLIP 10:52:46 11/02/01 (0)
• Front Strut Brace... Opinions on Different Brands? - Kaveman 21:34:12 11/01/01 (3)
  • Re: Front Strut Brace... Opinions on Different Brands? - Randy Clark 19:56:53 11/02/01 (0)
  • Thanks Troy.... and Don D. too!(neon post) - Kaveman 11:18:31 11/02/01 (0)
  • Re: Front Strut Brace... Opinions on Different Brands? - Troy Rudolph 08:28:13 11/02/01 (0)
• Power steering filter - Rob G. 20:59:00 11/01/01 (1)
  • Re: Power steering filter - Randy Clark 21:27:24 11/01/01 (0)
• Early Alpina Wheels - Bill Broeder 18:58:37 11/01/01 (0)
• Lift off ! - T. Han 17:01:34 11/01/01 (3)
  • Re: Lift off ! - Kaveman 21:35:53 11/01/01 (0)
  • Re: Lift off ! - FLIP 17:06:06 11/01/01 (1)
    • Re: Lift off ! - T. Han 00:32:44 11/02/01 (0)
• spotted on ebay, 530i parts car in Ohio - FLIP 15:27:43 11/01/01 (0)
• FS: Oil Pan - TCD 13:59:16 11/01/01 (0)
• FS: Tan leather 81 528i seats in PA - Charles Eckert 13:14:37 11/01/01 (0)
• Car running rich. - Gilbert S. 13:00:11 11/01/01 (2)
  • Re: Car running rich. - Peter Florance 15:38:27 11/01/01 (0)
  • Re: Car running rich. - Kaveman 13:39:24 11/01/01 (0)
• urethane bushes for the e12 - Paul Gray 12:29:04 11/01/01 (0)
• Rebuilt Shocks - Gene S 09:17:13 11/01/01 (1)
  • hey San Diego... - greghill 19:11:40 11/01/01 (0)
• New a/c fitted - Mark 02:38:17 11/01/01 (0)
• Approaching lift off... - T. Han 22:32:55 10/31/01 (1)
  • Re: Approaching lift off... - Frank H 09:41:10 11/01/01 (0)
• Cold Start Curcuit Question(s)?.... - Kaveman 14:36:28 10/31/01 (3)
  • Re: Cold Start Curcuit Question(s)?.... - Robert Bondi 17:46:17 10/31/01 (0)
  • Re: Cold Start Curcuit Question(s)?.... - Peter Florance 16:11:55 10/31/01 (1)
    • Peter Does It Again!!!! - Kaveman 17:21:20 10/31/01 (0)
• 80'528i cracked head? - billy 14:20:48 10/31/01 (11)
  • Re: 80'528i cracked head? - Mike M/78-530i/83-320i/84-733i 09:24:23 11/01/01 (1)
    • Additional comment - Mike M/78-530i/83-320i/84-733i 10:00:19 11/01/01 (0)
  • Re: 80'528i cracked head? - Mark 20:46:25 10/31/01 (0)
  • Cracked head... Perhaps not? - Lars PNW 81_528i 19:03:24 10/31/01 (5)
    • Re: Cracked head... Perhaps not? - billy 20:44:51 10/31/01 (4)
      • Re: Cracked head... Perhaps not? - mikey 23:30:21 10/31/01 (0)
      • Like Mark's idea... but another option is...>> - Lars PNW 81_528i 22:22:57 10/31/01 (1)
        • But... Keep this in mind... - Lars PNW 81_528i 22:29:11 10/31/01 (0)
      • Re: Cracked head... Perhaps not? - T. Han 22:08:12 10/31/01 (0)
  • Re: 80'528i cracked head? - Kaveman 16:45:22 10/31/01 (0)
  • Re: 80'528i cracked head? - Kaveman 16:45:09 10/31/01 (0)
• Carpet set - Dean 13:56:11 10/31/01 (3)
  • Re: Carpet set - Luke 22:01:33 10/31/01 (0)
  • Need help. - Dean 14:01:54 10/31/01 (1)
    • S/B 2 contoured pieces on the top right? - Dean 14:03:34 10/31/01 (0)
• whistling noise under accelaration - Gilbert S. 13:15:43 10/31/01 (8)
  • Re: whistling noise under accelaration - Kaveman 18:32:04 10/31/01 (2)
    • Re: whistling noise under accelaration - Gilbert S. 00:57:55 11/01/01 (1)
      • Re: whistling noise under accelaration - Peter Maag 14:14:26 11/01/01 (0)
  • Re: whistling noise under accelaration - texastim 17:17:17 10/31/01 (0)
  • Re: whistling noise under accelaration - Don Daynes 15:39:27 10/31/01 (0)
  • Re: whistling noise under accelaration - Troy Rudolph 13:38:12 10/31/01 (2)
    • Re: whistling noise under accelaration - Gilbert S. 14:15:41 10/31/01 (1)
      • It absolutely does. Mine whistles with a K&N too. - JB 19:48:50 10/31/01 (0)
• whistling noise under accelaration - Gilbert S. 13:15:40 10/31/01 (0)
• This is an E12 - Right? - Greg 12:18:59 10/31/01 (6)
  • Re: This is an E12 - Right? - Sam Schultz 12:50:46 10/31/01 (5)
    • Looks like E28 Euro front end - Eric 14:38:00 10/31/01 (0)
    • Re: This is an E12 - Right? - Gavin 12:57:57 10/31/01 (3)
      • Re: This is an E12 - Right? - Mark80528i 13:54:49 10/31/01 (2)
        • Re: This is an E12 - Right? - Gavin 14:36:01 10/31/01 (0)
        • Gavin? - Greg 14:21:57 10/31/01 (0)
• Replacement seats for 528i - Matthew Voss 11:27:16 10/31/01 (0)
• Exhaust for 528i - Matthew Voss 11:23:05 10/31/01 (4)
  • Re: Exhaust for 528i - Eric 14:47:08 10/31/01 (0)
  • Re: Exhaust for 528i - mikey 11:53:37 10/31/01 (0)
  • Re: Exhaust for 528i - Peter Maag 11:35:24 10/31/01 (1)
    • Re: Exhaust for 528i - headers? - Erik Maassen 17:27:06 11/01/01 (0)
• Two steps forward, one step back - Bill Barrett 08:38:28 10/31/01 (5)
  • Re: Two steps forward, one step back - Bob Iverach 13:03:30 11/01/01 (0)
  • Re: Two steps forward, one step back - Peter Maag 11:37:16 10/31/01 (2)
    • this is an E12 - right? - Greg 12:16:03 10/31/01 (1)
      • Oops! Wrong place - Greg 12:18:06 10/31/01 (0)
  • Re: Two steps forward, one step back - Damon C 09:51:56 10/31/01 (0)
• Bosch distributors - Patrick 05:24:11 10/31/01 (0)
• 320i runner followup. - Carlie Bentley 18:39:55 10/30/01 (0)
• New e12 owner, looking for advice. - Robert Purington 17:32:05 10/30/01 (4)
  • Re: New e12 owner, looking for advice. - Randy Clark 21:32:27 10/30/01 (0)
  • Re: New e12 owner, looking for advice. - Peter Claassen 18:42:54 10/30/01 (0)
  • Re: New e12 owner, looking for advice. - Carlie Bentley 18:17:16 10/30/01 (1)
    • Re: New e12 owner, looking for advice. - Robert Purington 10:12:03 10/31/01 (0)
• Difference of Distributors? - Kaveman 17:15:30 10/30/01 (2)
  • hey Jeff C - Peter Florance 16:58:31 10/31/01 (1)
    • hey Jeff C - does your book cover 015 dist? nt - Peter Florance 16:59:12 10/31/01 (0)
• 1975 530i for sale on E-Bay (estate sale).. - Timmer 13:38:05 10/30/01 (0)
• Conical air filter for 528i - Steve Chandler 13:32:21 10/30/01 (0)
• Help..heater water control valve - Steve Chandler 13:27:13 10/30/01 (3)
  • heater water control valve- there is hope - Trubey 22:19:53 11/02/01 (0)
  • Re: Help..heater water control valve - Kaveman 20:28:07 10/30/01 (0)
  • Re: Help..heater water control valve - Mike V 17:28:02 10/30/01 (0)
• Radio antenna - T. Han 08:31:07 10/30/01 (5)
  • Re: Radio antenna - greghill 21:03:31 10/30/01 (1)
    • Re: Radio antenna - T. Han 07:56:38 10/31/01 (0)
  • Re: Radio antenna - Luke 15:10:42 10/30/01 (2)
    0)

Distributors...U.S./Euro? - Bill Barrett 07:07:14 10/30/01 (2)

• Re: Distributors...U.S./Euro? - Sam Schultz 09:02:35 10/30/01 (1)
  • Re: Distributors...U.S./Euro? - Robert Purington 17:36:12 10/30/01 (0)

Directional Lights & 4-Way Flashers NG Help?? - Harold 06:52:00 10/30/01 (3)

• Re: Directional Lights & 4-Way Flashers NG Help?? - Carlie Bentley 18:19:22 10/30/01 (0)
• Re: Directional Lights & 4-Way Flashers NG Help?? - Chuck Denson 12:34:35 10/30/01 (1)
  • Re: Directional Lights & 4-Way Flashers NG Help?? - Harold 22:54:17 10/30/01 (0)

Trying to heat shield my conical K&N from reactor. - Ellis 06:21:24 10/30/01 (6)

• Heat shield - Chad Z 19:23:27 10/30/01 (0)
• Look at this picture for ideas. - TCD 10:57:33 10/30/01 (1)
  • Re: Look at this picture for ideas. - Carlie Bentley 18:54:29 10/30/01 (0)
• Re: Trying to heat shield my conical K&N from reactor. - Mark Phillips 10:07:16 10/30/01 (0)
• Re: Trying to heat shield my conical K&N from reactor. - mikey 09:51:48 10/30/01 (0)
• Re: Trying to heat shield my conical K&N from reactor. - Sam Schultz 06:25:29 10/30/01 (0)

Final Call - Nor Cal Dyno Day and So. Cal Caravan - Eric 01:49:33 10/30/01 (0)

7" headlights: Real or Photoshop? - Don Daynes 21:36:37 10/29/01 (20)

• The truth - Don Daynes 12:41:11 10/30/01 (5)
  • Don, excellent, excellent job (more) - FLIP 09:38:56 10/31/01 (1)
    • Re: Don, excellent, excellent job (more) - Don Daynes 13:45:32 10/31/01 (0)
  • Re: The truth - Wietse 19:06:22 10/30/01 (2)
    • Buckets - Don Daynes 20:30:05 10/30/01 (0)
    • It's called barter - Eric 19:30:45 10/30/01 (0)
• Re: 7" headlights: Real or Photoshop? - Mark80528i 09:15:10 10/30/01 (2)
  • Re: 7" headlights: Real or Photoshop? - Don Daynes 09:39:36 10/30/01 (1)
    • Re: 7" headlights: Real or Photoshop? - Mark80528i 07:27:39 10/31/01 (0)
• Someone has WAY too much free time - Undercover Police 07:38:23 10/30/01 (0)
• Someone has WAY too much free time - Undercover Police 07:38:22 10/30/01 (0)
• I know something I won't tell... - Eric 23:53:41 10/29/01 (0)
• Re: 7" headlights: Real or Photoshop? - Jim Hineline 23:52:54 10/29/01 (0)
• Re: 7" headlights: Real or Photoshop? - Troy Rudolph 22:47:15 10/29/01 (0)
• Re: 7" headlights: Real or Photoshop? - Greg 22:29:06 10/29/01 (0)
• Re: 7" headlights: Real or Photoshop? - Mr. Coffey 22:22:07 10/29/01 (0)
• Re: 7" headlights: Real or Photoshop? - Karl 21:47:51 10/29/01 (3)
  • Re: 7" headlights: Real or Photoshop? - Don Daynes 22:31:56 10/29/01 (0)
  • Re: 7" headlights: Real or Photoshop? - T.Han 22:07:58 10/29/01 (1)
    • Re: 7" headlights: Real or Photoshop? - Don Daynes 22:27:04 10/29/01 (0)

Burning up the DVD player. - Carlie Bentley 21:23:49 10/29/01 (0)

Whut is dirko ? - T. Han 20:42:11 10/29/01 (2)

• Re: What is Dirko ? - Don Daynes 22:37:25 10/29/01 (1)
  • Re: What is Dirko ? - Bill Bowes 06:14:29 10/30/01 (0)

gas mileage - Mike V. 16:56:14 10/29/01 (2)

• Re: gas mileage - Mike V 17:20:20 10/30/01 (0)
• Re: gas mileage - Peter Florance 16:57:58 10/29/01 (0)

Help with Cyl Head Replacement (Long) - Mr. Coffey 16:19:21 10/29/01 (10)

• Re: Help DONT FORGET - Scott 10:23:21 10/30/01 (0)
• Re: Help with Cyl Head Replacement (Long) - Mark 00:09:54 10/30/01 (0)
• Cam Lobes UP or DOWN?? Conflicting posts... - Lars PNW 81_528i 20:19:17 10/29/01 (2)
  • I just checked mine... - Mr. Coffey 22:17:53 10/29/01 (0)
  • Cam lobes should be facing down(away from rockers) - Frank H 20:23:08 10/29/01 (0)
• Re: Help with Cyl Head Replacement (Long) - Don Daynes 18:26:54 10/29/01 (1)
  • Clarification - Don Daynes 18:31:39 10/29/01 (0)
• Re: Help with Cyl Head Replacement (Long) - Bill Bowes 17:53:33 10/29/01 (2)
  • Re: Just saw Don's post go with DIRKO eom - Bill Bowes 18:40:04 10/29/01 (1)
    • Thanks (more) - Mr. Coffey 20:10:23 10/29/01 (0)

77' 530i For Sale - Jeremy T. 15:39:23 10/29/01 (0)

Mechanic says my M535i needs... - Luke 15:06:32 10/29/01 (5)

• Re: Mechanic says my M535i needs... - Eric 23:56:48 10/29/01 (1)
  • Re: Mechanic says my M535i needs... - Luke 15:04:00 10/30/01 (0)
• Re: Mechanic says my M535i needs... - Jim 18:25:55 10/29/01 (0)
• Luke, you see my post about Chicago? - FLIP 15:30:10 10/29/01 (0)
• springs and shocks - FLIP 15:15:58 10/29/01 (0)

A bad day for the parts car of torment - Chuck Denson 14:42:50 10/29/01 (0)

used brake fluid for sale on ebay - FLIP 11:38:43 10/29/01 (1)

• oops, sorry Trubey,went further and saw you posted - FLIP 11:45:21 10/29/01 (0)

Bilstein HD's with Korman springs installed! - FLIP 11:16:25 10/29/01 (5)

• Re: Bilstein HD's with Korman springs installed! - Eric 00:06:51 10/30/01 (1)
  • Re: Bilstein HD's with Korman springs installed! - FLIP 10:00:21 10/30/01 (0)
• Re: Bilstein HD's with Korman springs installed! - Don Daynes 11:46:09 10/29/01 (1)
  • springs and impact wrench - FLIP 12:17:53 10/29/01 (0)
• oh yeah, forgot ride height - FLIP 11:18:56 10/29/01 (0)

Grassroots E-12 project - Bill Barrett 08:55:49 10/29/01 (5)

• dyno numbers(a bit long) - stewart 03:59:43 11/01/01 (0)
• Re: Grassroots E-12 project - Bob 19:07:44 10/29/01 (0)
• Re: Grassroots E-12 project - Jim Davis 13:36:55 10/29/01 (2)
  • Re: Grassroots E-12 project - Bill Barrett 08:30:10 10/31/01 (0)
  • Re: Grassroots E-12 project - Bill Barrett 06:54:31 10/30/01 (0)

M535i question for those fortunate enough.:-) - Carlie Bentley 08:14:17 10/29/01 (3)

• Re: M535i question for those fortunate enough.:-) - Frank H 20:11:21 10/29/01 (2)
  • Re: M535i question for those fortunate enough.:-) - Don Daynes 12:16:53 10/30/01 (1)
    • Re: M535i question for those fortunate enough.:-) - Frank H 19:43:42 10/30/01 (0)

E21 Runner Question. - Carlie Bentley 08:11:26 10/29/01 (7)

• Re: E21 Runner Question. - Karl 21:36:29 10/29/01 (0)
• Re: E21 Runner Question. - Jim Davis 13:40:51 10/29/01 (0)
• Re: E21 Runner Question. - Peter Maag 10:22:42 10/29/01 (0)
• Re: E21 Runner Question. - Peter Maag 10:22:08 10/29/01 (0)
• Re: E21 Runner Question. - Bill Barrett 08:44:09 10/29/01 (0)
• Re: E21 Runner Question. - stewart 08:29:39 10/29/01 (1)
  • Re: E21 Runner Question. - Sam Schultz 10:21:37 10/29/01 (0)

Miss off-idle (Update) - Walt B. 07:44:36 10/29/01 (1)

• Re: Miss off-idle (Update) - Lenny D. 23:27:33 10/29/01 (0)

steering gear - stewart 06:20:28 10/29/01 (2)

• Re: steering gear - Peter Florance 08:15:52 10/29/01 (1)
  • Divine Guidance - Don Daynes 09:08:38 10/29/01 (0)

rear window defroster - fred 06:13:32 10/29/01 (1)

• Re: rear window defroster - Karl 21:45:24 10/29/01 (0)

valve cover help - Dennis 01:09:57 10/29/01 (1)

• Re: valve cover help - Carlie Bentley 07:51:42 10/29/01 (0)

Need Front Seats - Peter Maag 22:24:24 10/28/01 (1)

• Re: Need Front Seats - Sam Schultz 07:29:33 10/29/01 (0)

Luke, Ever pick up the 1st m5? eom - Trubey 20:25:10 10/28/01 (5)

• Re: Luke, Ever pick up the 1st m5? eom - Luke 21:33:27 10/28/01 (4)
  • Re: Luke, Ever pick up the 1st m5? eom - Frank H 20:32:57 10/29/01 (0)
  • where in Chicago, you should have called me! - FLIP 09:39:19 10/29/01 (0)
  • Re: Luke, Ever pick up the 1st m5? - Carlie Bentley 07:46:21 10/29/01 (1)
    • Photos coming - Luke 16:24:58 10/29/01 (0)

poor quality reverse light switches - Robert Bondi 20:16:29 10/28/01 (8)

• I have!! - Peter Florance 08:18:23 10/29/01 (5)
  • Re: I have!! - Robert Bondi 10:31:44 10/29/01 (4)
    • short vs long - Peter Florance 11:34:56 10/29/01 (0)
    • Re: I have!! - Peter Florance 11:25:24 10/29/01 (2)
      • Re: I have!! - Robert Bondi 16:16:46 10/29/01 (1)
        • Re: I have!! - Peter Florance 16:46:28 10/29/01 (0)
• Re: poor quality reverse light switches - Randy Clark 21:27:34 10/28/01 (1)
  • Re: poor quality reverse light switches - Sam Schultz 07:32:30 10/29/01 (0)

Fantastic deal on Castrol... - Trubey 20:13:56 10/28/01 (1)

• That's pretty funny. - Carlie Bentley 08:00:09 10/29/01 (0)

Got Bilsteins - Steve 19:30:26 10/28/01 (1)

• Re: Got Bilsteins - stewart 02:39:49 10/29/01 (0)

More parts for sale - Mark Phillips 16:42:15 10/28/01 (0)

More parts for sale - Mark Phillips 16:41:49 10/28/01 (2)

• Re: More parts for sale - robert bondi 20:08:18 10/28/01 (0)
• Sorry i only pressed once (eom) - Mark Phillips 16:45:44 10/28/01 (0)

Are the replacement (flat) K&N's worthwhile? - Bill Barrett 15:57:35 10/28/01 (3)

• Just my experience. (Yes this one is long as well. - Carlie Bentley 07:37:44 10/29/01 (0)
• Re: Are the replacement (flat) K&N's worthwhile? - Patrick 16:22:29 10/28/01 (1)
  • Re: Are the replacement (flat) K&N's worthwhile? - Bill Barrett 20:11:44 10/28/01 (0)

79 528i - Frank Swift 15:26:35 10/28/01 (0)

Breaking (Parting out) E12 M535i in Germany - James 13:32:23 10/28/01 (0)

Glove Compartment Light Switch ... (!) - James 13:08:37 10/28/01 (0)

Water Pump Questions - Mr. BILL 19:42:29 10/27/01 (7)

• Re: Water Pump Questions - texastim 22:37:26 10/28/01 (0)
• Re: Water Pump Questions - Robert Bondi 23:22:31 10/27/01 (0)
• Re: Water Pump Questions - Karl 21:31:36 10/27/01 (0)
• Re: Water Pump Questions - Steve Chandler 21:20:26 10/27/01 (3)
  • Re: Water Pump Questions - Mr. BILL 09:06:35 10/29/01 (2)
    • Re: Water Pump Questions - Damon C 14:24:50 10/29/01 (1)
      • Re: Geez.......... - Bill Bowes 18:34:05 10/29/01 (0)

Gas guage weirdness--Reny/Bondi - drscott1@home.com 16:04:03 10/27/01 (3)

• Re: Gas guage weirdness--Reny/Bondi - Robert Bondi 23:07:30 10/27/01 (0)
• Re: Gas guage weirdness--Reny/Bondi - Karl 21:43:54 10/27/01 (1)
  • Re: Gas guage weirdness--Reny/Bondi - Lenny D. 23:46:12 10/29/01 (0)

Soft silver wire - T.Han 14:31:57 10/27/01 (3)

• Re: Soft silver wire - Jim Davis 16:30:12 10/27/01 (2)
  • Yep, measures AC temp. - Carlie Bentley 07:57:02 10/29/01 (1)
    • Re: Yep, measures AC temp. - Lenny D. 23:54:18 10/29/01 (0)

WTB: 528i in NC - Jonas 13:14:45 10/27/01 (0)

What size tires should I use w/new wheels?? - ryan Bryan 22:43:13 10/26/01 (2)

• Re: What size tires should I use w/new wheels?? - Sam R. 23:36:46 10/26/01 (0)
• Re: What size tires should I use w/new wheels?? - Troy Rudolph 23:00:23 10/26/01 (0)

Update of Stuff... Peter F. Have a Look.... Long.. - Kaveman 18:40:24 10/26/01 (3)

• yes, O2 idle lag - greghill 17:43:16 10/28/01 (0)
• Re: Update of Stuff... Peter F. Have a Look.... Long.. - Peter Florance 08:07:05 10/27/01 (0)
• Re: Update of Stuff... Peter F. Have a Look.... Long.. - Sam R. 18:51:38 10/26/01 (0)

AFM-air temp sensor - Ellis 06:02:19 10/26/01 (6)

• Re: AFM-air temp sensor - Peter Florance 08:58:31 10/26/01 (5)
  • Re: AFM-air temp sensor - Ellis 18:47:48 10/27/01 (4)
    • Re: AFM-air temp sensor - Peter Florance 08:56:50 10/28/01 (0)
    • Re: AFM-air temp sensor - Robert Bondi 23:31:59 10/27/01 (2)
      • Re: AFM-air temp sensor/ Robert - Ellis 02:39:09 10/29/01 (1)
        • Re: AFM-air temp sensor/ Robert - robert bondi 16:06:52 10/29/01 (0)

Wheel questions - Andre528i 18:41:43 10/25/01 (3)

• Re: Wheel questions - Eric 18:55:35 10/25/01 (0)
• Re: Wheel questions - TCD 18:47:52 10/25/01 (1)
  • Re: Wheel questions - Alex Biro 20:48:29 10/26/01 (0)

79 528i battery woes and engine knocking... - Matthew Voss 18:03:12 10/25/01 (3)

• Sounds like altenator to me. - Carlie Bentley 14:29:29 10/26/01 (0)
• Re: 79 528i battery woes and engine knocking... - Robert bondi 19:19:40 10/25/01 (1)
  • Re: 79 528i battery woes and engine knocking... - Matthew Voss 11:15:28 10/31/01 (0)

Just the the upholstery shop and... - Dean 17:51:06 10/25/01 (14)

• Listen to Mike... He's very particular. - Lars PNW 81_528i 20:55:20 10/26/01 (0)
• Re: Just the the upholstery shop and... - mikey 18:09:16 10/26/01 (0)
• Contact cement faster than you think... - Lars PNW 81_528i 14:06:12 10/26/01 (0)
• If anyone can confirm that e28 carpet fits (M) - JB 18:42:35 10/25/01 (9)
  • E12-E28 Floor pans... Correct me please?? - Lars PNW 81_528i 20:28:56 10/25/01 (8)
    • Re: E12-E28 Floor pans... Correct me please?? - Robert Iverach 11:20:56 10/26/01 (0)
    • Re: E12-E28 Floor pans... Correct me please?? - Peter Florance 21:14:10 10/25/01 (6)
      • Re: E12-E28 Floor pans... Correct me please?? - T. Han 00:07:25 10/26/01 (5)
        • Re: E12-E28 Floor pans... Correct me please?? - mikey 17:54:54 10/26/01 (0)
        • So I should go the contact cement route? - Dean 11:37:12 10/26/01 (3)
          • Re: So I should go the contact cement route? - mikey 18:14:33 10/26/01 (2)
            • Re: So I should go the contact cement route? - T. Han 01:23:19 10/27/01 (1)
              • Re: So I should go the contact cement route? - mikey 12:01:35 10/27/01 (0)
• That would be, Just LEFT the upholstery... - Dean 17:53:34 10/25/01 (0)

Programmable Fuel injection kit - Peter Florance 15:58:37 10/25/01 (14)

• Maybe this could solve... - Carlie Bentley 14:11:15 10/26/01 (0)
• Re: Programmable Fuel injection kit - Don Daynes 16:27:53 10/25/01 (12)
  • oh yeah what are they selling - Peter Florance 16:31:09 10/25/01 (11)
    • love the disclaimer at the end, more - FLIP 17:24:21 10/25/01 (9)
      • Re: love the disclaimer at the end, more - Peter Florance 18:09:27 10/25/01 (8)
        • Would would be the theoretical gain of this system - Bill Barrett 20:43:09 10/25/01 (7)
          • Re: Would would be the theoretical gain of this system - Peter Florance 21:05:25 10/25/01 (6)
            • Re: Would would be the theoretical gain of this system - Karl 22:11:53 10/27/01 (3)
              • Re: Would would be the theoretical gain of this system - Peter Florance 13:26:54 10/29/01 (1)
                • Re: Would would be the theoretical gain of this system - John 21:21:20 10/29/01 (0)
              • Re: Would would be the theoretical gain of this system - John 00:04:00 10/28/01 (0)
            • It's over my head, but do I understand correctly? - Bill Barrett 22:29:31 10/25/01 (1)
              • I concurr, it sounds cool but... - FLIP 09:42:54 10/26/01 (0)
    • I'm game to get one.... - Frank H 16:41:44 10/25/01 (0)

Peter's L-Jet throttle body maintence FAQ - FLIP 14:52:18 10/25/01 (3)

• Re: Peter's L-Jet throttle body maintence FAQ - Peter Florance 15:56:46 10/25/01 (2)
  • Re: Peter's L-Jet throttle body maintence FAQ - T. Han 00:12:49 10/26/01 (1)
    • Re: Peter's L-Jet throttle body maintence FAQ - Dennis 16:19:23 11/03/01 (0)

Starter problems? - Tara Knowles 14:34:34 10/25/01 (1)

• Re: Starter problems? - Carlie Bentley 14:36:05 10/26/01 (0)

Radiators! - Chuck Denson 13:19:26 10/25/01 (2)

• Re: Radiators! - Troy Rudolph 14:20:40 10/25/01 (1)
  • Re: Radiators! - Sam schultz 14:24:00 10/25/01 (0)

Universal clips - Steve Chandler 10:46:57 10/25/01 (0)

FOR: Matt Evans.... - Kaveman 10:04:47 10/25/01 (1)

• Matt: Your Email Address is TOAST!? - Kaveman 09:26:13 10/26/01 (0)

What are the part#'s for 320i runners - Cass 07:44:09 10/25/01 (3)

• Re: What are the part#'s for 320i runners - Cass 08:15:29 10/25/01 (2)
  • Re: What are the part#'s for 320i runners - Peter Florance 18:16:33 10/25/01 (1)
    • more clues - Robert Bondi 19:08:26 10/25/01 (0)

Ignition key search - Jeffrey Jay 22:21:16 10/24/01 (1)

• Re: Ignition key search - Don Daynes 02:03:02 10/25/01 (0)

What is the "Jules Verns" device? - Cass 22:13:33 10/24/01 (7)

• Re: What is the "Jules Verns" device? - Peter Claassen 17:34:02 10/25/01 (2)
  • Re: What is the "Jules Verns" device? - Patrick 05:05:49 10/26/01 (1)
    • Re: What is the "Jules Verns" device? - T.Han 22:36:28 10/28/01 (0)
• Re: What is the "Jules Verns" device? - Peter Florance 06:52:12 10/25/01 (0)
• Re: What is the "Jules Verns" device? - Troy Rudolph 22:16:43 10/24/01 (2)
  • Re: What is the "Jules Verns" device? - T.Han 22:58:19 10/24/01 (1)
    • Re: What is the "Jules Verns" device? - Mark 18:06:40 10/25/01 (0)

Winter Cleaning Continues.... Shameless Plug-eBay - Kaveman 20:54:47 10/24/01 (

Re: also fits E28 confirmed (more) - Kaveman 09:59:28 10/25/01 (0)

Passing leads - Luis Cordero 16:49:21 10/24/01 (0)

Parts 4 sale - Mark Phillips 15:50:00 10/24/01 (1)

• Re: Parts 4 sale - Steve Chandler 10:48:57 10/25/01 (0)

Parts 4 sale - Mark Phillips 15:49:40 10/24/01 (0)

Muffler - Steven Chandler 11:57:29 10/24/01 (12)

• Re: Muffler (of course it's long I wrote it) - Carlie Bentley 14:57:04 10/26/01 (0)
• Re: Muffler - Eric 19:39:56 10/24/01 (1)
  • Re: Muffler - Peter Florance 19:47:18 10/24/01 (0)
• Re: Muffler - mikey 18:13:36 10/24/01 (4)
  • The ones at Bav Auto & Rocky mountain. - Martyn Smith 09:35:00 10/25/01 (3)
    • I'm in this topic a little late - FLIP 14:56:59 10/26/01 (0)
    • Re: The ones at Bav Auto & Rocky mountain. - mikey 11:07:28 10/25/01 (1)
      • Re: The ones at Bav Auto & Rocky mountain. - mikey 11:16:53 10/25/01 (0)
• Re: Muffler - Peter Florance 12:12:25 10/24/01 (3)
  • Re: Muffler - Steven Chandler 10:40:46 10/25/01 (2)
    • Re: Muffler - Peter Florance 16:00:21 10/25/01 (0)
    • Where did you find the ansa??? - Martyn Smith 14:59:22 10/25/01 (0)

High Beam Wattage?... - Kaveman 22:02:47 10/23/01 (4)

• Re: High Beam Wattage?... - Bob Iverach 18:50:20 10/24/01 (0)
• Re: High Beam Wattage?... - Eric 15:24:50 10/24/01 (0)
• Re: High Beam Wattage?... - Peter Florance 12:13:44 10/24/01 (0)
• Re: High Beam Wattage?... - Jimmie 08:34:23 10/24/01 (0)

FS: 3.64 open diff $175 - TCD 20:50:10 10/23/01 (0)

Trans mount - T. Han 18:36:18 10/23/01 (0)

need pass side fender 78 530i - ken 17:22:01 10/23/01 (1)

• Re: need pass side fender 78 530i - Sam schultz 18:00:09 10/23/01 (0)

Large cover piece underneath the steering column. - Dean 17:00:59 10/23/01 (3)

• Driver's knee panel EOM - Trubey 20:46:36 10/23/01 (0)
• Re: Large cover piece underneath the steering column. - Robert Bondi 17:13:28 10/23/01 (1)
  • Re: Large cover piece underneath the steering column. - Sam Schultz 18:02:29 10/23/01 (0)

FS: Valve cover - David 14:33:36 10/23/01 (1)

• Re: FS: Valve cover - Chuck Denson 16:03:40 10/23/01 (0)

The COOLEST e12 gadget I have seen - Trubey 12:16:31 10/23/01 (2)

• Whats your email? can't find it. - Martyn Smith 13:51:48 10/23/01 (1)
  • duh... nt - trubey 19:12:25 10/23/01 (0)

WHOOHOOO!!! Passed emissions in Chicago! - FLIP 12:16:12 10/23/01 (0)

Power Locks stuck closed - Damon C 08:19:50 10/23/01 (1)

• Re: Power Locks stuck closed - Peter Florance 19:50:24 10/23/01 (0)

L-Jet Coolant Sensor Resistance Values? - Walt Barie 07:29:44 10/23/01 (9)

• Re: L-Jet Coolant Sensor Resistance Values? - Karl 16:21:44 10/23/01 (0)
• Re: L-Jet Coolant Sensor Resistance Values? - Kaveman 10:26:04 10/23/01 (7)
  • Re: L-Jet Coolant Sensor Resistance Values? - William 19:42:21 10/24/01 (4)
    • Re: L-Jet Coolant Sensor Resistance Values? - Walt B. 07:31:12 10/25/01 (0)
    • Re: L-Jet Coolant Sensor Resistance Values? - Kaveman 20:36:22 10/24/01 (2)
      • Re: L-Jet Coolant Sensor Resistance Values? - William 05:27:06 10/26/01 (1)
        • Re: L-Jet Coolant Sensor Resistance Values? - Walt Barie 07:53:12 10/26/01 (0)
  • Re: L-Jet Coolant Sensor Resistance Values? - William 19:40:00 10/24/01 (0)
  • Re: L-Jet Coolant Sensor Resistance Values? - William 19:38:23 10/24/01 (0)

How to reset gas gauge - Reny 07:27:28 10/23/01 (1)

• Re: How to reset gas gauge - Robert Bondi 17:02:51 10/23/01 (0)

77'530i for SALE - Kevin Um 01:49:25 10/23/01 (0)

outbreak of dunrites disease - mikey 23:56:34 10/22/01 (2)

• Re: outbreak of dunrites disease - T. Han 23:18:41 10/23/01 (1)
  • disc? (nt) - Don Daynes 02:17:33 10/24/01 (0)

oil pan problems - medfly 19:58:06 10/22/01 (4)

• Re: oil pan problems - mikey 23:36:22 10/22/01 (2)
  • Re: oil pan problems - medfly 00:14:49 10/23/01 (1)
    • Re: oil pan problems - mikey 01:16:18 10/23/01 (0)
• Re: oil pan problems - Robert Bondi 20:47:48 10/22/01 (0)

FS: Zender Trunk Spoiler... Winter Cleaning!.... - Kaveman 19:02:30 10/22/01 (0)

FS: Momo Monte Carlo Steering Wheel w/E12 Hub - Kaveman 17:57:00 10/22/01 (0)

any list members in Denver? - ...tom 16:26:00 10/22/01 (1)

• Re: any list members in Denver? - Paul Morrison 00:03:45 10/23/01 (0)

mpg 528i? - Dale Beuning 14:00:29 10/22/01 (5)

• Re: mpg 528i? - Steve Chandler 08:49:03 10/24/01 (0)
• Re: mpg 528i? - fred 07:21:20 10/24/01 (2)
  • 530i mileage much less... - Eric 19:33:37 10/24/01 (0)
  • Re: mpg 528i? - Dale Beuning 14:53:37 10/24/01 (0)
• Re: mpg 528i? - Eric 16:07:46 10/22/01 (0)

79 528i for sale - Frank Swift 13:01:58 10/22/01 (0)

BBS rear spoiler info - Greg 12:18:55 10/22/01 (5)

• BBS spoiler pics!!! - Greg 21:52:43 10/22/01 (0)
• Looking forward to seeing it, not sure exactly (m) - John 12:49:34 10/22/01 (3)
  • Re: Looking forward to seeing it, not sure exactly (m) - Matt V 23:06:55 10/22/01 (2)
    • I'm interested in one - FLIP 13:17:50 10/23/01 (0)
    • They are sold by a place in Austria (nt) - John 11:05:42 10/23/01 (0)

complete turbo setup from 745i turbo FS - FLIP 10:08:16 10/22/01 (0)

driving on 5 cylinders, not fun - FLIP 10:07:10 10/22/01 (2)

• Re: driving on 5 cylinders, not fun - Eric 17:06:26 10/23/01 (0)
• Re: driving on 5 cylinders, not fun - T.Han 23:08:00 10/22/01 (0)

Wietse, last chance on rear shade and Hartge badge - TCD 09:28:59 10/22/01 (0)

FS:Euro 6springs/320 runners - David 02:59:00 10/22/01 (0)

KYB Gas Adjust? - Alex Biro 00:50:19 10/22/01 (2)

• Re: KYB Gas Adjust? - Karl 12:04:25 10/22/01 (1)
  • Re: KYB Gas Adjust? Karl is right, but... - Scott 13:11:11 10/22/01 (0)

Euro bumpers 10 for $0.10? I don't know - Trubey 00:24:38 10/22/01 (1)

• Re: Euro bumpers 10 for $0.10? I don't know - antdog 18:16:26 10/27/01 (0)

Whoever is FLYLOKI a pic of your car - trubey 21:55:26 10/21/01 (0)

Whoever is FLYLOKI a pic of your car - trubey 21:46:10 10/21/01 (1)

• I'm famous! Lol That was at a Cruise stop over.. - John 23:48:23 10/21/01 (0)

Free E-12 parts - Jeff 20:14:26 10/21/01 (2)

• Re: Free E-12 parts - Kris 14:27:14 10/22/01 (0)
• Re: Free E-12 parts - Kris 13:34:59 10/22/01 (0)

528i For Sale - Vern 17:19:06 10/21/01 (0)

WTB: good used ICU - Jeremy T 17:08:59 10/21/01 (0)

Time for a long winters nap. - Carlie Bentley 15:51:13 10/21/01 (0)

Injector hoses - Jim Smith 12:05:55 10/21/01 (2)

• they're 8mm id - ...tom 13:13:05 10/21/01 (0)
• Re: Injector hoses - Dave Spencer 12:24:39 10/21/01 (0)

´77 520i - Owerflow 09:09:11 10/21/01 (7)

• Re: ´77 520i - Mark 09:49:09 10/21/01 (0)
• Re: ´77 520i - Sam Schultz 09:36:23 10/21/01 (5)
  • Re: ´77 520i - Troy Rudolph 11:59:33 10/21/01 (4)
    • Re: ´77 520i - Sam Schultz 22:08:19 10/21/01 (3)
      • Re: ´77 520i - Owerflow 13:30:05 10/22/01 (2)
        • Re: ´77 520i - Sam Schultz 20:17:53 10/23/01 (0)
        • Re: ´77 520i - Mark 17:48:16 10/23/01 (0)

success!! 1977 520 - guy 08:35:01 10/21/01 (2)

• Re: success!! 1977 520 - Chuck Denson 10:27:58 10/21/01 (0)
• Re: success!! 1977 520 - Sam Schultz 09:40:48 10/21/01 (0)

Smog test again...what maintenance? - JohnN 21:29:33 10/20/01 (2)

• Re: Smog test again...what maintenance? - Peter Claassen 19:13:49 10/22/01 (1)
  • Re: Smog test again...what maintenance? - JohnN 23:23:21 10/23/01 (0)

FS: 1985 Head Port/Polish Stainless rockers/valve - TCD 20:28:02 10/20/01 (0)

528i "Sport Spring" Susp. Diagnosis - Part III - Eric 15:00:54 10/20/01 (3)

• Re: 528i "Sport Spring" Susp. Diagnosis - Part III - Patrick 04:35:34 10/21/01 (2)
  • Can you e-mail me? (nt) - Eric 23:20:33 10/21/01 (0)
  • Can you e-mail me? (nt) - Eric 23:20:11 10/21/01 (0)

5-speed and LSD FS - Rob T 11:57:18 10/20/01 (16)

• seat pics - Rob T 15:36:23 10/21/01 (0)
• seat pics - Rob T 15:36:03 10/21/01 (5)
  • sorry , forgot something - Rob T 15:40:18 10/21/01 (4)
    • front seats - Rob T 15:43:53 10/21/01 (3)
      • rear seats - Rob T 15:46:05 10/21/01 (2)
        • Prices? I need the whole pile... - Dave Spencer 20:10:36 10/21/01 (0)
        • I want it! - Chad Z 18:01:19 10/21/01 (0)
• What color is the interior? - Dave Spencer 15:03:41 10/20/01 (8)
  • tan - thanks trubey (nt) - Rob T 15:47:29 10/20/01 (1)
    • Re: tan - thanks trubey (nt) - Dave Spencer 19:35:08 10/20/01 (0)
  • US e28 M5s were all tan interior. - trubey 15:36:52 10/20/01 (5)
    • untrue, some were black, maybe a dozen, (eom) - FLIP 21:29:55 10/20/01 (4)
      • Factory? - Trubey 18:38:58 10/21/01 (3)
        • yes, factory - FLIP 11:33:45 10/22/01 (2)
          • Definitely! - Trubey 23:25:28 10/22/01 (1)
            • Oops. I forgot the link and the F/S - Trubey 23:27:33 10/22/01 (0)

530i pickup..... - Bill Bowes 09:27:36 10/20/01 (0)

European Car Magazine - Canadian Bimmer 08:29:34 10/20/01 (0)

I just realized I never got 1 of those cool shirts - Trubey 00:18:59 10/20/01 (1)

• Re: I just realized I never got 1 of those cool shirts - Eric 22:29:59 10/20/01 (0)

Fuel Pump????????? - Clifton 21:05:43 10/19/01 (7)

• Re: Fuel Pump????????? - Clifton 21:09:48 10/19/01 (6)
  • Re: Fuel Pump????????? - clifton 21:12:30 10/19/01 (5)
    • Re: Fuel Pump????????? - Don Daynes 03:10:58 10/20/01 (0)
    • Re: Fuel Pump????????? - T.Han 23:48:25 10/19/01 (3)
      • Re: Fuel Pump????????? - T.Han 23:57:10 10/19/01 (2)
        • Re: Fuel Pump????????? - F. French 13:33:14 10/23/01 (1)
          • Re: Fuel Pump????????? - Frank Swift 17:55:55 10/23/01 (0)

Fuel injection system question!!!!!!!!!!!! - Chad Z 19:44:13 10/19/01 (6)

• Re: Fuel injection system question!!!!!!!!!!!! - T. Han 00:10:21 10/20/01 (5)
  • Re: Fuel injection system question!!!!!!!!!!!! - Mark 22:09:53 10/20/01 (4)
    • Guess I should research before instead of after!!! - Chad Z 18:04:46 10/21/01 (3)
      • Re: Guess I should research before instead of after!!! - Mark 20:10:31 10/21/01 (2)
        • No big problems really - Chad Z 22:14:22 10/21/01 (1)
          • Re: No big problems really - Mark 02:35:34 10/22/01 (0)

New clutch - T.Han 15:31:24 10/19/01 (1)

• Re: New clutch - Kaveman 21:40:09 10/19/01 (0)

#&@(% plastic universal joints on temp selector... - Dave Spencer 14:15:23 10/19/01 (9)

• E-mail me your ship address - Lars PNW 81_528i 18:26:13 10/19/01 (1)
  • Check your email... - Dave Spencer 20:09:38 10/19/01 (0)
• The black funny looking, swively kind... buy new - Lars PNW 81_528i 16:44:38 10/19/01 (1)
  • Re: The black funny looking, swively kind... buy new - Dave Spencer 17:02:19 10/19/01 (0)
• Re: #&@(% plastic universal joints on temp selecto - Randy McCafferty 15:12:49 10/19/01 (0)
• sympathy, not help - FLIP 14:44:16 10/19/01 (3)
  • Re: sympathy, not help - T.Han 15:24:53 10/19/01 (2)
    • Re: sympathy, not help - FLIP 16:01:44 10/19/01 (1)
      • Re: sympathy, not help - Dave Spencer 17:04:25 10/19/01 (0)

Dyno Day... - scottie 10:51:14 10/19/01 (0)

bad noise :-O - MarcMc 22:25:11 10/18/01 (14)

• Re: bad noise :-O - Matt B 07:51:13 10/20/01 (0)
• Reverse gearset - Carl Mc 09:21:31 10/19/01 (8)
  • Re: Reverse gearset - T.Han 00:17:20 10/20/01 (0)
  • I don't get it - Trubey 19:23:33 10/19/01 (6)
    • YOUR ARE CORRECT !!!! - STAN 23:22:14 10/19/01 (5)
      • Re: correct - Trubey 00:00:14 10/20/01 (4)
        • Re: correct - STAN 09:04:52 10/20/01 (0)
        • Re: correct - Don Daynes 02:51:39 10/20/01 (2)
          • Re: correct - Trubey 15:41:10 10/20/01 (0)
          • DON IS CORRECT THAT IS THE ONE I'M TALKING ABOUT - STAN 09:06:33 10/20/01 (0)
• Re: bad noise :-O - T.Han 00:31:51 10/19/01 (0)
• Re: bad noise :-O - mark 00:25:23 10/19/01 (0)
• Re: bad noise :-O - Stan 23:18:39 10/18/01 (0)
• Re: bad noise :-O - Trubey 23:03:55 10/18/01 (0)

1979 520 Pushrod or OHC - Chris C 22:24:59 10/18/01 (1)

• Re: 1979 520 Pushrod or OHC - Troy Rudolph 22:34:36 10/18/01 (0)

3.5l L-Jet motor F/S $300 (NOT MINE) - Trubey 22:21:56 10/18/01 (0)

1979 Euro-525 - Jeff Campbell 21:06:24 10/18/01 (2)

• Re: 1979 Euro-525 - Sam Schultz 17:54:23 10/19/01 (0)
• Re: 1979 Euro-525 - Robert Bondi 23:25:33 10/18/01 (0)

'78 Motorsport E12 533i, any in US? - FLIP 16:50:28 10/18/01 (3)

• Re: '78 Motorsport E12 533i, any in US? - Luke 18:18:12 10/18/01 (2)
  • Re: '78 Motorsport E12 533i, any in US? - jeff Campbell 20:49:32 10/18/01 (1)
    • Re: '78 Motorsport E12 533i, any in US? - Frank H 09:15:13 10/19/01 (0)

"Shorty" O2 Sensor??? ARRRGGG!!! - Kaveman 13:19:51 10/18/01 (11)

• Re: "Shorty" O2 Sensor??? ARRRGGG!!! - Peter Maag 15:39:30 10/18/01 (0)
• Re: "Shorty" O2 Sensor??? ARRRGGG!!! - Peter Florance 13:35:38 10/18/01 (6)
  • Re: "Shorty" O2 Sensor??? ARRRGGG!!! - Kaveman 14:47:56 10/18/01 (5)
    • why buy a Bosch? - Peter Florance 14:50:47 10/18/01 (4)
      • Re: why buy a Bosch? - Kaveman 19:06:30 10/18/01 (3)
        • Re: why buy a Bosch? - Peter Florance 19:25:12 10/18/01 (2)
          • Wells... for S10.... - Kaveman 21:37:44 10/19/01 (1)
            • Re: Wells... for S10.... - Peter Florance 08:53:54 10/20/01 (0)
• Pic Link of the Problem..... - Kaveman 13:21:53 10/18/01 (2)
  • Copy link into browser and it works nm - Dave P 14:13:37 10/18/01 (0)
  • file loading error - FLIP 13:49:06 10/18/01 (0)

Experience - T.Han 12:49:38 10/18/01 (7)

• Re: Experience - Luke 14:07:38 10/18/01 (6)
  • Re: Experience - stewart 18:40:50 10/18/01 (5)
    • Re: Experience - Luke 05:33:33 10/19/01 (4)
      • Too much money - Trubey 19:20:18 10/19/01 (3)
        • Re: Too much money - Dave Spencer 22:00:36 10/19/01 (2)
          • Re: Too much money - trubey 00:13:39 10/20/01 (1)
            • Re: Too much money - T. Han 14:03:39 10/20/01 (0)

In the spirit of promoting the E12. - Carlie Bentley 11:14:38 10/18/01 (4)

• BMW Fall tour Pics of KY from MI? - Trubey 23:21:47 10/18/01 (1)
  • Small World. - CarlieBentley 13:15:07 10/19/01 (0)
• Re: In the spirit of promoting the E12. - FLIP 11:30:52 10/18/01 (1)
  • yep, simple problem difficult fix. - Carlie Bentley 14:14:22 10/18/01 (0)

Ignition module on ebay - 3 hrs left $10.00 - Peter Florance 10:51:07 10/18/01 (1)

• Re: Ignition module on ebay - 3 hrs left $10.00 - Mark Phillips 11:22:09 10/18/01 (0)

innovative engine destruction, off topic but funny - FLIP 10:09:07 10/18/01 (2)

• Re: innovative engine destruction, off topic but funny - Carlie Bentley 10:59:10 10/18/01 (0)
• that's a hell of a way to decarb an eng . ???? - Stan 10:50:06 10/18/01 (0)

Messd up brakes - Chad Z 09:41:28 10/18/01 (1)

• Re: Messd up brakes - Wietse 14:08:32 10/18/01 (0)

RPM drop at idle after engine reaches normal opera - Ellis 09:09:31 10/18/01 (4)

• Re: RPM drop at idle after engine reaches normal opera - Mark 20:23:16 10/23/01 (0)
• Re: RPM drop at idle after engine reaches normal opera - Peter Florance 10:30:28 10/18/01 (2)
  • Re: RPM drop at idle after engine reaches normal opera - Ellis 17:42:53 10/18/01 (1)
    • Re: RPM drop at idle after engine reaches normal opera - Peter Florance 19:11:45 10/18/01 (0)

FI Injector Part # ? - Walt Barie 07:35:34 10/18/01 (4)

• Re: FI Injector Part # ? - Troy Rudolph 14:12:40 10/18/01 (0)
• Re: FI Injector Part # ? - STAN 08:08:51 10/18/01 (2)
  • Bosch # - Robert Bondi 09:44:24 10/18/01 (1)
    • Re: Fuel Injector (WTB) - Walt Barie 09:48:30 10/18/01 (0)

Next to last call - So Cal Caravan to Dyno Day - Eric 01:45:05 10/18/01 (0)

1980 528i for Sale, So Calif area - John 23:25:12 10/17/01 (0)

power locks not working - John 23:00:13 10/17/01 (1)

• Re: power locks not working - greghill 13:19:33 10/18/01 (0)

Cold Starting??? - Alex Biro 21:19:20 10/17/01 (6)

• Re: Cold Starting??? - Kaveman 21:28:36 10/17/01 (5)
  • DoH!... Meant Dist CAP!!! - Kaveman 21:29:13 10/17/01 (4)
    • Re: DoH!... Meant Dist CAP!!! - Alex Biro 01:12:16 10/18/01 (3)
      • Re: DoH!... Meant Dist CAP!!! - Jim Hineline 01:17:09 10/18/01 (2)
        • Re: DoH!... Meant Dist CAP!!! - Alex Biro 01:58:34 10/19/01 (1)
          • Re: DoH!... Meant Dist CAP!!! - Jim Hineline 11:31:08 10/19/01 (0)

FS: AFM (011 model 79-81 E12) - Kaveman 17:49:43 10/17/01 (2)

• Sold! Thanks For the Interest.... - Kaveman 23:21:25 10/22/01 (0)
• Re: FS: AFM (011 model 79-81 E12) - Chuck Denson 06:33:43 10/19/01 (0)

Signs of a Failing AFM - Mishast 12:47:21 10/17/01 (2)

• I'm just making this up... - greghill 21:00:35 10/17/01 (1)
  • you got, just reverse closed vs open - Peter Florance 07:04:22 10/19/01 (0)

Rapid Overheating - Mark80528i 12:27:20 10/17/01 (7)

• Re: Rapid Overheating - Peter Florance 14:39:04 10/17/01 (0)
• Your problem is air in the coolant! - Dean 14:31:35 10/17/01 (2)
  • Re: Your problem is air in the coolant! - Mark80528i 14:53:46 10/17/01 (1)
    • Re: Your problem is air in the coolant! - T.Han 20:38:05 10/17/01 (0)
• Does exhaust have white seam? - Collins 14:21:54 10/17/01 (1)
  • Re: Does exhaust have white seam? - Mark80528i 14:32:17 10/17/01 (0)
• Re: Rapid Overheating - Mike M '78 530i 12:55:20 10/17/01 (0)

Microfilm Correction - David Simmons 12:15:13 10/17/01 (0)

Bleeder valves... size??? - Martyn Smith 10:56:49 10/17/01 (9)

• Re: Bleeder valves... size??? - stewart 20:47:43 10/17/01 (0)
• Re: Bleeder valves... size??? - Dave Spencer 15:53:47 10/17/01 (6)
  • ATTN JEFF C, someone else uses teflon tape (eom) - FLIP 16:40:42 10/17/01 (4)
    • I just want to make things clear for newbies... - jeff C 08:19:40 10/18/01 (0)
    • no!!!!!!!!!! - Peter Florance 20:21:17 10/17/01 (2)
      • 10K miles, and not problems though (more) - FLIP 11:26:18 10/18/01 (0)
      • Should have pointed this out... - Dave Spencer 07:26:49 10/18/01 (0)
  • Re: Bleeder valves... size??? - Peter Florance 16:03:09 10/17/01 (0)
• Re: Bleeder valves... size??? - Mike M '78 530i 13:06:34 10/17/01 (0)

Miss off-idle pulling away from stop - Walt Barie 07:50:22 10/17/01 (6)

• Re: Miss off-idle pulling away from stop (Update) - Walt Barie 07:43:49 10/18/01 (1)
  • also consider making this (pic attached) - Peter Florance 07:06:42 10/19/01 (0)
• Re: Miss off-idle pulling away from stop - Lenny D. 19:28:35 10/17/01 (0)
• Re: Miss off-idle pulling away from stop - Kaveman 10:48:08 10/17/01 (0)
• Re: Miss off-idle pulling away from stop - Jim Davis 10:43:36 10/17/01 (0)
• Re: Miss off-idle pulling away from stop - Peter Florance 10:26:01 10/17/01 (0)

Frozen Rear Caliper - Harold 21:42:04 10/16/01 (2)

• Re: Frozen Rear Caliper - Peter Florance 05:48:55 10/17/01 (1)
  • Re: Frozen Rear Caliper - mikey 10:40:02 10/17/01 (0)

Can you drive a car before registering? - Luke 20:46:03 10/16/01 (15)

• Luke, Before you leave! - Carlie Bentley 14:21:41 10/18/01 (2)
  • Oh Yeah, I'm in Lexington KY. - Carlie Bentley 14:25:53 10/18/01 (1)
    • Re: Oh Yeah, I'm in Lexington KY. - Luke 15:36:43 10/18/01 (0)
• Yes. - TCD 16:17:49 10/17/01 (0)
• Re: Can you drive a car before registering? (long) - Jim Davis 00:07:48 10/17/01 (5)
  • It's an M535i in Florida! - Luke 14:42:15 10/17/01 (4)
    • Re: It's an M535i in Florida! - FLIP 16:43:18 10/17/01 (3)
      • Yes, that one - Luke 18:45:54 10/17/01 (2)
        • Hisssssss! - Trubey 23:37:42 10/17/01 (1)
          • Re: Hisssssss! - Luke 01:02:40 10/18/01 (0)
• Re: Can you drive a car before registering? - stewart 22:08:16 10/16/01 (0)
• Re: Can you drive a car before registering? - Frank H 20:58:19 10/16/01 (3)
  • Re: Can you drive a car before registering? - Luke 21:01:26 10/16/01 (2)
    • Re: Can you drive a car before registering? - Mr. Coffey 23:15:52 10/16/01 (1)
      • Insurance? - Dave Spencer 16:01:53 10/17/01 (0)

heated O2 sensor? Hey Sean S, please weigh in. - Peter Florance 18:52:59 10/16/01 (7)

• Re: heated O2 sensor? Hey Sean S, please weigh in. - Karl 21:35:18 10/17/01 (0)
• Re: heated O2 sensor? Hey Sean S, please weigh in. - David B 23:55:30 10/16/01 (1)
  • Re: heated O2 sensor? Hey Sean S, please weigh in. - Peter Florance 05:46:41 10/17/01 (0)
• Re: heated O2 sensor? Hey Sean S, please weigh in. - Kaveman(aka Sean S) 19:46:43 10/16/01 (3)
  • Re: weak distributer adv.?? - David B 23:14:44 10/16/01 (0)
  • Re: heated O2 sensor? Hey Sean S, please weigh in. - Peter Florance 20:26:49 10/16/01 (0)
  • Re: heated O2 sensor? Hey Sean S, please weigh in. - farokh 20:04:23 10/16/01 (0)

Can e23 4-piston front brakes be fitted as an... - Raj 16:16:36 10/16/01 (4)

• Re: Can e23 4-piston front brakes be fitted as an... - Peter Florance 05:54:11 10/17/01 (1)
  • Re: Can e23 4-piston front brakes be fitted as an... - Don Daynes 10:43:03 10/17/01 (0)
• Re: Can e23 4-piston front brakes be fitted as an... - Don Daynes 16:34:56 10/16/01 (1)
  • Thanks 4 the info. The reason I asked is... - Raj 16:49:50 10/16/01 (0)

Fuel Pressure Regulators - Adjustable - Jeff Ross 13:43:11 10/16/01 (0)

FS Chrome Mirror - Mark Phillips 13:24:01 10/16/01 (1)

• 140 Speedo has working odometer? - Dean 15:57:22 10/16/01 (0)

Muffler woes? General woes? - Dean 11:59:13 10/16/01 (2)

• Re: Muffler woes? General woes? - Peter Florance 12:51:42 10/16/01 (1)
  • more - Dean 14:25:15 10/16/01 (0)

Help... Stop me before I buy again!!! - Lars PNW 81_528i 11:17:49 10/16/01 (0)

early e12 afm on late e12? - Dale Beuning 02:54:48 10/16/01 (3)

• Re: early e12 afm on late e12? - Peter Florance 06:22:32 10/16/01 (2)
  • Re: early e12 afm on late e12? - Dale Beuning 01:39:32 10/17/01 (1)
    • Re: early e12 afm on late e12? - Peter Florance 05:50:37 10/17/01 (0)

Opinions Wanted: Front Strut Brace(again....) - Kaveman 21:35:15 10/15/01 (5)

• Re: Opinions Wanted: Front Strut Brace(again....) - Don Daynes 00:59:21 10/16/01 (0)
• Re: Opinions Wanted: Front Strut Brace(again....) - Alex Biro 22:14:33 10/15/01 (3)
  • Re: Opinions Wanted: Front Strut Brace(again....) - Kaveman 18:27:08 10/16/01 (2)
    • Re: Opinions Wanted: Front Strut Brace(again....) - Alex Biro 21:12:27 10/16/01 (0)
    • Re: Opinions Wanted: Front Strut Brace(again....) - Alex Biro 20:32:51 10/16/01 (0)

Anyone got an 80-83 320i Too? - Kaveman 21:32:34 10/15/01 (0)

Some interesting spoilers for sale.... - Bill Bowes 20:28:54 10/15/01 (1)

• Re: Some interesting spoilers for sale.... - T.Han 22:56:13 10/15/01 (0)

e12 must sell sf bayarea 1500$ - jesse 19:29:10 10/15/01 (0)

Paging Ryan Bryon - B&G springs - Don Daynes 18:00:28 10/15/01 (1)

• Re: Paging Ryan Bryon - B&G springs - Ryan Bryan 18:21:26 10/15/01 (0)

Wanted: Pair of front turning signal covers. - Dean 17:41:22 10/15/01 (3)

• Re: Wanted: Pair of front turning signal covers. - Randy McCafferty 09:24:24 10/16/01 (0)
• Re: Wanted: Pair of front turning signal covers. - stewart 18:04:24 10/15/01 (1)
  • The lenses, but I'll inspect the assembly. - Dean 18:47:19 10/15/01 (0)

Spring info (not in FAQ) - Eric 16:55:45 10/15/01 (5)

• Re: Spring info (not in FAQ)... - Kaveman 20:19:01 10/15/01 (1)
  • M5 engine would work :) :( (nt) - Eric 20:27:17 10/15/01 (0)
• Re: Spring info (not in FAQ) - Frank H 19:19:21 10/15/01 (1)
  • Re: Spring info (not in FAQ) - Eric 20:24:32 10/15/01 (0)
• Re: Spring info (not in FAQ) - Don Daynes 17:40:17 10/15/01 (0)

Unusual E12 Items For Sale - David Simmons 15:25:37 10/15/01 (0)

Need functioning, used EGR valve for a 77 530i - PHPeters 15:01:54 10/15/01 (1)

• Re: Need functioning, used EGR valve for a 77 530i - Michael Longeneker 20:42:54 10/15/01 (0)

79 528i for sale - Frank Swift 14:26:21 10/15/01 (1)

• Re: 79 528i for sale - TCD 14:58:21 10/15/01 (0)

Back to the air tool discussion pls - Jeff C 14:16:09 10/15/01 (2)

• Re: Back to the air tool discussion pls - T.Han 15:49:57 10/15/01 (1)
  • Re: Back to the air tool discussion pls - Jeff C 08:23:16 10/16/01 (0)

1978 BMW 530i For Sale, CHEAP! - David Simmons 10:34:05 10/15/01 (0)

Atl area BMW meet..ROB BONDI read this.. - Scott 09:23:13 10/15/01 (2)

• Re: Atl area BMW meet..ROB BONDI read this.. - Robert Bondi 16:06:01 10/15/01 (0)
• oh yeah...Guys, Roberts Car is BAD!! - Scott 09:26:05 10/15/01 (0)

For Sale-528i - Eric 01:01:56 10/15/01 (2)

• Re: For Sale-528i - Michael Longeneker 12:12:22 10/15/01 (1)
  • Re: For Sale-528i - Eric 19:15:50 10/17/01 (0)

CALIPERS - BIGERIK 23:35:02 10/14/01 (6)

• Re: CALIPERS - stewart 19:11:51 10/15/01 (2)
  • Re: CALIPERS - BIGERIK 19:42:53 10/15/01 (1)
    • Re: CALIPERS - stewart 05:34:24 10/16/01 (0)
• Check the FAQ - Peter Florance 06:28:45 10/15/01 (2)
  • Re: Check the FAQ - BIGERIK 20:20:09 10/15/01 (1)
    • Paging Kaveman - rebuild parts source in bay area? - Peter Florance 06:30:47 10/16/01 (0)

Aussie E12 - Adam B 21:12:44 10/14/01 (2)

• Re: Aussie E12 - Robert Bondi 22:15:05 10/14/01 (1)
  • Re: Aussie E12 - Mark 06:07:43 10/15/01 (0)

Fan clutch differences? - Alex Biro 20:24:47 10/14/01 (1)

• Re: Fan clutch differences? - Kaveman 20:40:06 10/14/01 (0)

Windsheild replacement? - Alex Biro 20:22:35 10/14/01 (2)

• Re: Windsheild replacement? - T. Han 00:03:10 10/15/01 (1)
  • Re: Windsheild replacement? - Bob Iverach 15:24:19 10/15/01 (0)

WTB: interior trim parts - Randy McCafferty 20:00:58 10/14/01 (0)

gas gauge idiot light going off for no reason - FLIP 19:52:32 10/14/01 (3)

• just guessing, but... - Jim Davis 22:55:49 10/14/01 (2)
  • Re: just guessing, but... - Robert Bondi 00:35:07 10/15/01 (1)
    • Re: just guessing, but... - Peter Florance 15:10:28 10/16/01 (0)

On Topic... Off Topic.....??? - Lars PNW 81_528i 18:48:35 10/14/01 (0)

REAR SPOILER? - BIGERIK 15:16:13 10/14/01 (11)

• Found a site... - Wietse 21:26:13 10/14/01 (2)
  • Are they real? Phone doesn't work and no listing - Jeff C 10:35:24 10/15/01 (1)
    • Re: Are they real? Probably - Don Daynes 11:40:14 10/15/01 (0)
• I found source for BBS deck lid spoiler ....(m) - J Betts 20:27:58 10/14/01 (2)
  • Re: I found source for BBS deck lid spoiler ....(m) - T.Han 00:59:09 10/15/01 (0)
  • Correction - Spoiler about $35 shipping $95 (nt) - J Betts 21:00:44 10/14/01 (0)
• Re: REAR SPOILER? - Kaveman 17:07:23 10/14/01 (4)
  • Re: REAR SPOILER? - Mark 20:04:24 10/14/01 (3)
    • Re: REAR SPOILER? - Jim Hineline 20:56:35 10/14/01 (2)
      • THANKS - BIGERIK 23:30:10 10/14/01 (0)
      • I bought this one - Trubey 23:14:29 10/14/01 (0)

Part # and soruce request - SwampJedi 15:05:35 10/14/01 (4)

• Re: Part # and soruce request - Randy McCafferty 19:50:01 10/14/01 (0)
• Re: Part # and soruce request - Chuck Denson 16:04:13 10/14/01 (2)
  • Re: Part # and soruce request - SwampJedi 17:39:50 10/14/01 (1)
    • Gauge illumination - trubey 23:20:33 10/14/01 (0)

1977 520 - guy 08:32:07 10/14/01 (6)

• Re: 1977 520 - Chuck Denson 03:06:33 10/15/01 (0)
• Re: 1977 520 - Troy Rudolph 22:14:03 10/14/01 (0)
• Re: 1977 520 (long) - Jim Davis 12:07:35 10/14/01 (3)
  • Re: 1977 520 (long) - guy 02:15:14 10/15/01 (1)
    • Re: 1977 520 (long) - Troy Rudolph 11:41:42 10/15/01 (0)
  • Re: 1977 520 (long) - Mark 20:09:31 10/14/01 (0)

M535i/Bilstein HD install - Mixed Results (long) - Eric 00:45:51 10/14/01 (5)

• Are you saying Were not worth Matsuhisha ? - Jeff 02:06:05 10/15/01 (0)
• Re: M535i/Bilstein HD install - Mixed Results (long) - james 03:09:35 10/14/01 (3)
  • What? - Eric 11:14:33 10/14/01 (2)
    • Re: What? - James 01:13:31 10/20/01 (0)
    • Re: Spring perch? - David B 01:29:05 10/15/01 (0)

Rear End Longevity? - Harold 15:30:04 10/13/01 (7)

• Re: Rear End Longevity? - stewart 20:05:20 10/15/01 (0)
• Re: Rear End Longevity? - Jeff C 09:53:21 10/15/01 (0)
• Re: Rear End Longevity? - Dave Farrell 13:26:27 10/14/01 (0)
• 335,000 miles and Fuel Pump finally broke - Lars PNW 81_528i 02:16:42 10/14/01 (0)
• Well over 200k - Eric 00:53:26 10/14/01 (0)
• 260,xxx + miles still going(eom) - Ryan Bryan 21:25:28 10/13/01 (0)
• Re: Rear End Longevity? - Lenny D. 17:20:09 10/13/01 (0)

HolyS%$@ that was close... - Scott 13:15:14 10/12/01 (2)

• Re: HolyS%$@ that was close... - raymom 13:04:05 10/13/01 (1)
  • Re: HolyS%$@ that was close... - Matt B 20:43:58 10/18/01 (0)

not an E12 picture, but very cool euro E23 - FLIP 12:25:34 10/12/01 (2)

• sorry geocities sucks,reload,or save link as file - FLIP 13:10:05 10/12/01 (0)
• Link doesnt work, pls retry - Martyn 12:54:56 10/12/01 (0)

Car of the month getting noticed now. - Dean 12:13:59 10/12/01 (2)

• Group Plans - Karl 22:27:36 10/12/01 (0)
• Yes... - Eric 18:15:56 10/12/01 (0)

Auxillary Air Valve - Tara Knowles 12:01:28 10/12/01 (2)

• Re: Auxillary Air Valve - Troy Rudolph 12:26:41 10/12/01 (0)
• Re: Auxillary Air Valve - T. Han 12:24:00 10/12/01 (0)

Asian Forums and Chat Awaits You / Middle East Bre - Roger 11:47:30 10/12/01 (2)

• SPAM - Dean 13:06:40 10/12/01 (1)
  • Re: SPAM - Troy Rudolph 14:57:24 10/12/01 (0)

Accelerator Pump using L Jet ? An idea ...... - Peter Claassen 10:28:37 10/12/01 (6)

• Re: Accelerator Pump using L Jet ? An idea ...... - Karl 22:35:22 10/12/01 (3)
  • Re: Accelerator Pump using L Jet ? An idea ...... - Peter Florance 08:54:42 10/14/01 (2)
    • Re: Roast my cat ? - Peter Claassen 23:51:55 10/14/01 (1)
      • Re: Roast my cat ? - Peter Florance 06:43:52 10/15/01 (0)
• A simpleton's thought - Eric 18:22:10 10/12/01 (1)
  • Re: A simpleton's thought - Peter Florance 08:55:25 10/14/01 (0)

mystery parts..... - scottie 01:24:32 10/12/01 (0)

seat fitment - stewart 22:56:11 10/11/01 (1)

• Re: seat fitment - Kaveman 00:50:47 10/12/01 (0)

clock and radio stop working - john 22:21:19 10/11/01 (2)

• Re: clock and radio stop working - Randy McCafferty 07:58:31 10/12/01 (0)
• Re: clock and radio stop working - mikey 23:42:51 10/11/01 (0)

Free Stuff - TCD 15:18:39 10/11/01 (0)

Haynes manual on eBay - Jim Davis 14:54:27 10/11/01 (2)

• Re: Haynes manual NEW!! - scottie 01:34:13 10/12/01 (1)
  • Re: I stink at links - scottie 01:36:11 10/12/01 (0)

AFM's - T. Han 14:38:23 10/11/01 (4)

• Re: AFM's - Mishast 20:34:19 10/11/01 (1)
  • Re: AFM's - T. Han 20:55:52 10/11/01 (0)
• Re: AFM's - Sam Schultz 15:55:46 10/11/01 (1)
  • Re: AFM's - T.Han 21:05:21 10/11/01 (0)

Idle much too high - Tara Knowles 13:28:41 10/11/01 (3)

• Re: Idle much too high - Peter Florance 16:26:30 10/11/01 (0)
• Re: Idle much too high - Jim Davis 15:08:56 10/11/01 (1)
  • Re: Idle much too high - Mark 19:59:29 10/11/01 (0)

Seatbelts - Chad Z 13:26:06 10/11/01 (5)

• Re: Seatbelts - DScott 15:48:04 10/12/01 (1)
  • great! - Chad Z 16:46:25 10/12/01 (0)
• Oops I forgot--> - Chad Z 13:28:28 10/11/01 (2)
  • Re: Oops I forgot--> - CHAD Z 12:51:21 10/12/01 (1)
    • Re: Oops I forgot--> - Chuck Denson 14:44:45 10/12/01 (0)

FS: Performance exhaust $50 - TCD 11:21:12 10/11/01 (0)

WTB: Wiper assembly - Chuck Denson 10:38:41 10/11/01 (2)

• Re: WTB: Wiper assembly - David B 23:47:10 10/11/01 (1)
  • Re: WTB: Wiper assembly - Chuck Denson 08:05:09 10/12/01 (0)

DynoDay!!! (need to know if you are IN?) - Kaveman 09:53:19 10/11/01 (8)

• Re: DynoDay!!! (need to know if you are IN?) - Troy Rudolph 22:26:56 10/11/01 (0)
• Re: DynoDay!!! (need to know if you are IN?) - Peter Claassen 18:34:24 10/11/01 (0)
• I'm there. NO dyno. - Dean 15:33:06 10/11/01 (1)
  • No prerequisites... - Eric 19:22:39 10/11/01 (0)
• I'm IN...So. Cal Caravan... - Eric 14:44:05 10/11/01 (0)
• I'd love to go, though no dyno. - Dean 12:13:31 10/11/01 (1)
  • Mockery? - Eric 14:49:06 10/11/01 (0)
• Re: DynoDay!!! IN - Don Daynes 10:28:28 10/11/01 (0)

Anyone with 265 OD and CR experience? Opinions? - TCD 09:18:25 10/11/01 (9)

• Re: Anyone with 265 OD and CR experience? Opinions? - Troy Rudolph 16:03:59 10/12/01 (1)
  • Re: Anyone with 265 OD and CR experience? Opinions? - TCD 20:41:16 10/12/01 (0)
• Re: Anyone with 265 OD and CR experience? Opinions? - Don Daynes 16:12:18 10/11/01 (1)
  • Too "tight" - Eric 19:34:34 10/11/01 (0)
• Re: Anyone with 265 OD and CR experience? Opinions? - Eric 15:00:06 10/11/01 (3)
  • Re: Anyone with 265 OD and CR experience? Opinions? - TCD 15:14:11 10/11/01 (2)
    • Stock cam or high revving? (more) - Eric 19:37:28 10/11/01 (1)
      • Re: Stock cam or high revving? (more) - TCD 21:41:28 10/11/01 (0)
• Re: Anyone with 265 OD and CR experience? Opinions? - Frank H 09:35:50 10/11/01 (0)

speakers place in E12 - zoltan 01:42:55 10/11/01 (7)

• Re: speakers place in E12 - Bob Iverach 15:12:01 10/15/01 (0)
• Re: speakers place in E12 - stewart 22:05:17 10/11/01 (0)
• Re: speakers place in E12 - Troy Rudolph 08:15:41 10/11/01 (4)
  • Re: speakers place in E12 - Don Daynes 11:16:30 10/11/01 (1)
    • Re: speakers place in E12 - Troy Rudolph 15:58:52 10/12/01 (0)
  • You can put 4x6's in the rear shelf?????? - Martyn Smith 09:34:44 10/11/01 (1)
    • Re: You can put 4x6's in the rear shelf?????? - Trubey 10:04:00 10/11/01 (0)

Hood and quarter panel FS - ben 00:28:26 10/11/01 (0)

Center resonator GONE? - trubey 22:26:04 10/10/01 (12)

• No center muffler. Results: - Trubey 12:02:41 10/11/01 (8)
  • I have same bumper problem - Martyn Smith 12:43:04 10/11/01 (7)
    • Re: I have same bumper problem - Chuck Denson 15:20:42 10/12/01 (0)
    • Re: I have same bumper problem - T. Han 13:45:09 10/11/01 (5)
      • do this instead.... requires welding. - Greg 15:11:13 10/11/01 (4)
        • Sounds good... but wrapping bumpers in foam - Martyn Smith 19:02:13 10/11/01 (0)
        • I never noticed - trubey 18:48:56 10/11/01 (2)
          • the accordion - Greg 07:21:12 10/12/01 (0)
          • bummer bumper - Scott 21:30:07 10/11/01 (0)
• Re: Center resonator GONE? - Jim Davis 11:51:29 10/11/01 (1)
  • Re: Center resonator GONE? - T. Han 13:52:46 10/11/01 (0)
• DO IT! - Chad Z 23:40:52 10/10/01 (0)

1979 528i for sale - FRANK SWIFT 20:23:35 10/10/01 (0)

US/EURO Bumper Weight Analysis - Mishast 19:45:53 10/10/01 (7)

• Why not just go on a diet?????????? - Martyn Smith 10:02:11 10/11/01 (0)
• great, well written, informative. Thanks! (eom) - FLIP 09:56:17 10/11/01 (0)
• Re: US/EURO Bumper Weight Analysis - David B 23:41:52 10/10/01 (0)
• You need Children (or More Children) - Lars PNW 81_528i 22:20:57 10/10/01 (0)
• Re: US/EURO Bumper Weight Analysis - Trubey 22:20:13 10/10/01 (2)
  • Re: US/EURO Bumper Weight Analysis - Mark 02:06:54 10/11/01 (1)
    • Re: US/EURO Bumper Weight Analysis - Trubey 11:56:24 10/11/01 (0)

I'm buying the M535i - Luke 19:24:05 10/10/01 (0)

Chrome side mirrors, ebay, will they fit '80? - Dean 19:13:52 10/10/01 (4)

• yes, they attach to the window corner - ...tom 20:10:00 10/10/01 (0)
• Re: Chrome side mirrors, ebay, will they fit '80? - Kaveman 19:34:17 10/10/01 (0)
• Re: Chrome side mirrors, ebay, will they fit '80? - Luke 19:27:20 10/10/01 (1)
  • Re: Chrome side mirrors, ebay, will they fit '80? - Mark 03:08:09 10/11/01 (0)

Haltech E6A For E12 - Zane 17:52:05 10/10/01 (0)

NTC Switch? - David 16:43:36 10/10/01 (1)

• Re: NTC Switch? - Robert Bondi 17:45:11 10/10/01 (0)

VERY NICE E12 for sale here in Chicago 'burbs - FLIP 16:09:05 10/10/01 (2)

• anyone interested in this car? (more) - FLIP 09:59:12 10/11/01 (0)
• Sounds somewhat similar to mine... - Eric 18:40:49 10/10/01 (0)

posting pics - scottie 15:56:33 10/10/01 (0)

My (experienced ?) opinion... - T. Han 14:30:26 10/10/01 (1)

• Yea if I had access to a mchine shop... - Dean 15:06:10 10/10/01 (0)

More 4/5 funny business - T. Han 13:18:35 10/10/01 (6)

• Re: More 4/5 funny business - Eric 19:42:53 10/11/01 (0)
• Re: More 4/5 funny business - Sam Schultz 13:50:09 10/10/01 (4)
  • Re: More 4/5 funny business - T. Han 14:06:35 10/10/01 (3)
    • Re: More 4/5 funny business - Peter Florance 14:50:45 10/10/01 (2)
      • Re: More 4/5 funny business - scottie 15:00:51 10/10/01 (1)
        • Re: More 4/5 funny business - Peter Florance 18:55:46 10/10/01 (0)

Luv this stuff - Dieter 11:28:11 10/10/01 (2)

• Re: Luv this stuff - Peter Florance 12:29:08 10/10/01 (1)
  • Re: Luv this stuff - Troy Rudolph 14:23:07 10/10/01 (0)

Impact wrench or air ratchet? Which to buy? - Jeff C 08:57:55 10/10/01 (7)

• Re: Impact wrench or air ratchet? Which to buy? - Frank H 10:36:21 10/10/01 (0)
• Re: Impact wrench or air ratchet? Which to buy? - Kaveman 10:08:13 10/10/01 (0)
• Impact wrench has limited use. - Lars PNW 81_528i 09:35:36 10/10/01 (4)
  • Let me clarify my question - Jeff C 11:48:46 10/10/01 (3)
    • Neither- - Trubey 17:10:26 10/10/01 (0)
    • Re: Let me clarify my question - Scott 12:39:01 10/10/01 (1)
      • Re: Let me clarify my question - RayN 09:25:03 10/13/01 (0)

Crashed my e12 - Luke 03:50:49 10/10/01 (8)

• Re: Crashed my e12 - Kent Minault 15:39:19 10/11/01 (2)
  • Re: Crashed my e12 - raymon 13:10:49 10/13/01 (0)
  • Re: Crashed my e12 - milicz 18:15:42 10/11/01 (0)
• Re: Crashed my e12 - Scott 08:37:42 10/10/01 (4)
  • Re: Crashed my e12 - Luke 15:58:25 10/10/01 (3)
    • Re: Crashed my e12 - Scott 13:09:21 10/12/01 (2)
      • Re: Crashed my e12 - Luke 15:04:22 10/12/01 (1)
        • Re: Crashed my e12 - Scott 09:06:07 10/15/01 (0)

rear suspension observation, mas - greghill 23:20:49 10/09/01 (0)

differential seal - greghill 23:11:21 10/09/01 (3)

• wait, I'm not done - greghill 23:13:41 10/09/01 (2)
  • Re: wait, I'm not done - Peter Florance 07:02:41 10/10/01 (0)
  • Re: wait, I'm not done - Mark 04:07:42 10/10/01 (0)

Has anyone had a distributor recurved? - Bill Barrett 22:41:44 10/09/01 (2)

• Re: Has anyone had a distributor recurved? - Chad Z 22:48:25 10/09/01 (1)
  • Re: Has anyone had a distributor recurved? - Mark 03:54:04 10/10/01 (0)

Oops ! heh,heh DRIVESHAFT ? - T.Han 21:34:46 10/09/01 (8)

• Re: Oops ! heh,heh DRIVESHAFT ? - ...tom 04:55:10 10/10/01 (1)
  • Re: Oops ! heh,heh DRIVESHAFT ? - T. Han 09:42:58 10/10/01 (0)
• Re: Oops ! heh,heh DRIVESHAFT ? - T. Han 22:03:06 10/09/01 (5)
  • Re: Oops ! heh,heh DRIVESHAFT ? - Kaveman 22:35:28 10/09/01 (4)
    • Re: Oops ! heh,heh DRIVESHAFT ? - T. Han 23:50:30 10/09/01 (3)
      • Re: Oops ! heh,heh DRIVESHAFT ? - Kaveman 10:14:50 10/10/01 (2)
        • Re: Oops ! heh,heh DRIVESHAFT ? - Peter Florance 12:31:33 10/10/01 (1)
          • reusing guibo nuts - Jeff C 15:13:18 10/10/01 (0)

ok ..it worth a shot....ATL GA. - Scott 14:22:44 10/09/01 (2)

• process of elimination.... - Robert Bondi 17:51:34 10/09/01 (1)
  • Re: process of elimination.... - Scott 08:44:58 10/10/01 (0)

E12 at Bav Auto Show'n'shine? - FLIP 12:37:26 10/09/01 (16)

• ooooOOOOooo here it is. - FLIP 15:12:26 10/09/01 (3)
  • Are those light covers, or special lights? - Dean 17:34:59 10/09/01 (2)
    • euro (french) highbeams - ...tom 18:26:54 10/09/01 (0)
    • Re: Are those light covers, or special lights? - stewart 18:22:27 10/09/01 (0)
• Re: E12 at Bav Auto ...WOW - Scott 15:01:11 10/09/01 (0)
• 7 Series wagon? - Dean 14:05:11 10/09/01 (7)
  • Re: 7 Series wagon? - Troy Rudolph 17:23:40 10/09/01 (2)
    • Garage Du Bac? - Eric 18:23:08 10/09/01 (1)
      • Re: Garage Du Bac? - Sam Schutlz 19:04:55 10/09/01 (0)
  • Re: 7 Series wagon? - Eric 15:26:28 10/09/01 (0)
  • Re: 7 Series wagon? - Jim Davis 15:24:36 10/09/01 (0)
  • Quick link. - Dean 14:16:48 10/09/01 (1)
    • Criton theres another one - Sam Schultz 15:39:25 10/09/01 (0)
• another E12, better picture, nice car - FLIP 12:43:01 10/09/01 (2)
  • Re: another E12, better picture, nice car - Randy McCafferty 09:07:05 10/10/01 (1)
    • Re: another E12, better picture, nice car - FLIP 10:01:33 10/10/01 (0)

question about 5spd tranny - Kris 12:26:58 10/09/01 (0)

Wietse, can you email me offline? - FLIP 11:32:20 10/09/01 (0)

pulling to left under hard braking, what is it? - FLIP 10:16:39 10/09/01 (19)

• Re: pulling to left under hard braking, what is it? - Troy Rudolph 00:09:04 10/10/01 (1)
  • Re: pulling to left under hard braking, what is it? - Troy Rudolph 00:10:51 10/10/01 (0)
• Re: pulling to left under hard braking, what is it? - Michael Longeneker 23:21:33 10/09/01 (0)
• Re: pulling to left under hard braking, what is it? - Troy Rudolph 22:49:12 10/09/01 (0)
• Hey guys..answer me this... - Scott 15:31:18 10/09/01 (1)
  • ? - Dean 13:43:14 10/10/01 (0)
• Replace your brake lines!! - Chris 14:17:21 10/09/01 (1)
  • See my other post!! Brand new stainless steel! (e) - FLIP 14:59:51 10/09/01 (0)
• An idea if it's not your caliper - Jeff C 13:31:30 10/09/01 (3)
  • No you cannot call it a 'brake thingy' - Peter Florance 13:41:07 10/09/01 (2)
    • Re: No you cannot call it a 'brake thingy' - FLIP 14:58:30 10/09/01 (1)
      • All new EVERYTHING! - Trubey 22:37:04 10/10/01 (0)
• I have a similar problem, but to the right. - Martyn Smith 11:46:59 10/09/01 (6)
  • Re: I have a similar problem, but to the right. - Frank H 14:26:14 10/09/01 (4)
    • radius rod bushings, where are they? - FLIP 15:00:52 10/09/01 (3)
      • front of the subframe behind the giant nuts - Peter Florance 15:24:30 10/09/01 (2)
        • Re: front of the subframe behind the giant nuts - FLIP 15:44:12 10/09/01 (1)
          • Re: front of the subframe behind the giant nuts - Frank H 19:07:44 10/09/01 (0)
  • Re: I have a similar problem, but to the right. - greghill 12:00:28 10/09/01 (0)

Wiper Blade Arm problems, need help - Martyn Smith 08:50:35 10/09/01 (5)

• Re: Wiper Blade Arm problems, need help - Mark Phillips 10:56:22 10/09/01 (1)
  • Sounds good, I can wait....not much longer! - Martyn Smith 11:45:13 10/09/01 (0)
• Re: Wiper Blade Arm problems, need help - Mark Phillips 10:56:01 10/09/01 (0)
• Re: Wiper Blade Arm problems, need help - Mark Phillips 09:55:16 10/09/01 (1)
  • Albany, NY (upstate) - Martyn Smith 09:58:03 10/09/01 (0)

4 to 5 speed - T. Han 03:04:16 10/09/01 (4)

• Re: 4 to 5 speed - Troy Rudolph 10:11:27 10/09/01 (3)
  • whoa, cool bracket - ...tom 15:42:40 10/09/01 (1)
    • driveshaft - Don Daynes 15:52:12 10/09/01 (0)
  • Re: 4 to 5 speed - T. Han 12:44:51 10/09/01 (0)

What does AFM mean? - Matt Evans 01:59:29 10/09/01 (1)

• Re: What does AFM mean? - T.Han 02:56:48 10/09/01 (0)

Front sway bar? - BIGERIK 23:02:48 10/08/01 (7)

• mounting brakets for big swaybar (long) - Jeff C 13:48:57 10/09/01 (1)
  • Re: mounting brakets for big swaybar (long) - Scott 15:09:13 10/09/01 (0)
• Re: Front sway bar? - Scott 12:39:41 10/09/01 (0)
• broken mounts - greghill 12:08:25 10/09/01 (0)
• Suspension Techniques ...more - Greg 07:37:36 10/09/01 (2)
  • yup, Korman has'em for the E12 (eom) - FLIP 09:42:55 10/09/01 (1)
    • THANKS TO ALL (EOM) - BIGERIK 01:02:07 10/10/01 (0)

Mass airflow sensor?? - Chad Z 21:27:53 10/08/01 (20)

• Re: Mass airflow sensor?? - Kaveman 22:38:31 10/09/01 (0)
• Re: Mass airflow sensor?? - Troy Rudolph 22:25:01 10/08/01 (18)
  • CAI - Chad Z 22:59:47 10/08/01 (17)
    • Re: CAI - Greg 07:30:32 10/09/01 (0)
    • Re: CAI - Peter Florance 06:50:20 10/09/01 (13)
      • Re: CAI - Mark 07:11:23 10/09/01 (12)
        • Re: CAI - Peter Florance 08:23:13 10/09/01 (11)
          • Re: CAI - Mark 10:42:13 10/09/01 (10)
            • conclusion - Chad Z 12:36:19 10/09/01 (9)
              • Don't forget the big Wing!!! - Jeff C 13:53:27 10/09/01 (8)
                • HA! That was hilarious! (eom) - FLIP 15:24:47 10/09/01 (0)
                • Shit, here is the link - Jeff C 13:55:39 10/09/01 (6)
                  • try this - Peter Florance 13:56:47 10/09/01 (5)
                    • I mean this - Peter Florance 13:57:34 10/09/01 (4)
                      • no this - Peter Florance 13:59:33 10/09/01 (3)
                        • Are you guys making fun of me? - CHad Z 22:08:56 10/09/01 (2)
                          • Re: Are you guys making fun of me? - Mark 03:59:41 10/10/01 (1)
                            • Not at all -- refers to old post -- welcome - jeff C 08:25:31 10/10/01 (0)
    • Re: CAI - Troy Rudolph 00:01:55 10/09/01 (1)
      • Re: CAI - Mark 05:51:19 10/09/01 (0)

WTB: 265 5 speed tranny - TCD 20:19:37 10/08/01 (0)

Engine-Block Identification (Desperate) - Mishast 17:38:37 10/08/01 (1)

• Re: Engine-Block Identification (Desperate) - klc1237 19:07:29 10/29/01 (0)

Peter F. Please email me the 3.91 diff contact - TCD 17:36:33 10/08/01 (1)

• sorry it sold - Peter Florance 09:09:22 10/09/01 (0)

Can I use this oil in my tranny and differential? - Dave Farrell 16:58:33 10/08/01 (3)

• Re: Can I use this oil in my tranny and differential? - Frank H 19:01:41 10/08/01 (2)
  • www.redlineoil.com - Chris 09:46:25 10/09/01 (0)
  • www.redlineoil.com - Chris 09:46:13 10/09/01 (0)

528 converted (535-Motronic) FS - Peter 15:46:32 10/08/01 (3)

• Re: 528 converted (535-Motronic) FS - Greg 16:38:56 10/08/01 (2)
  • Re: 528 converted (535-Motronic) FS - Peter 23:05:13 10/08/01 (1)
    • Re: 528 converted (535-Motronic) FS - Greg 07:20:33 10/09/01 (0)

Free E12 in Los Angeles - Chris 14:28:57 10/08/01 (0)

Wiper Stuff - Chuck Denson 13:24:34 10/08/01 (0)

rear shocks - stewart 13:11:55 10/08/01 (0)

Injector/ top end cleaning (to Flip) - T. Han 13:00:10 10/08/01 (1)

• thanks for the info (more) - FLIP 14:12:24 10/08/01 (0)

Results of 800 mile trip. - TCD 12:38:47 10/08/01 (0)

Gaskets - T. Han 22:50:48 10/07/01 (3)

• Re: Gaskets - Don Daynes 00:16:04 10/08/01 (0)
• Re: Gaskets...I'm glad you asked - Bill Barrett 23:25:08 10/07/01 (1)
  • Re: Gaskets...I'm glad you asked - T. Han 23:49:26 10/07/01 (0)

Looking for a publication - Jim Davis 22:48:35 10/07/01 (3)

• Re: Looking for a publication - Troy Rudolph 11:02:34 10/08/01 (1)
  • Re: Looking for a publication - Jim Davis 11:50:31 10/08/01 (0)
• Re: Looking for a publication - T.Han 22:52:53 10/07/01 (0)

Injector assembly - T. Han 21:31:08 10/07/01 (0)

Injector questions - T. Han 21:18:24 10/07/01 (6)

• related injector question - FLIP 10:00:39 10/08/01 (1)
  • Re: related injector question - T.Han 11:53:33 10/08/01 (0)
• Re: Injector questions - Don Daynes 23:34:05 10/07/01 (3)
  • Re: Injector questions - T. Han 23:55:44 10/07/01 (2)
    • Re: Injector questions - Stan 08:47:19 10/08/01 (0)
    • Re: Injector questions - Don Daynes 00:11:39 10/08/01 (0)

rear suspension observation - greghill 17:13:45 10/07/01 (4)

• Re: rear suspension design observation - David B 00:25:32 10/09/01 (0)
• Re: rear suspension observation - Karl 17:00:15 10/08/01 (1)
  • Re: can't stop weight transfer - David B 01:31:57 10/09/01 (0)
• Re: rear suspension observation - Eric 02:06:38 10/08/01 (0)

Anyone Going to Bavarian Autosport's Show & Shine? - Harold 23:56:51 10/06/01 (0)

Will Motronic Injectors work on an 81 L Jet? (nt) - Chris 22:56:31 10/06/01 (1)

• Re: Will Motronic Injectors work on an 81 L Jet? (nt) - Peter Florance 11:07:02 10/07/01 (0)

free e12 in california from other board - ...tom 20:59:07 10/06/01 (0)

Speedo giving incorrect mph's - Randy McCafferty 15:58:54 10/06/01 (3)

• Re: Speedo giving incorrect mph's - Karl 21:30:33 10/06/01 (2)
  • Re: Speedo giving incorrect mph's - Robert Bondi 23:38:25 10/07/01 (1)
    • Re: Speedo giving incorrect mph's - Don Daynes 00:24:24 10/08/01 (0)

lamda conversion - farokh 15:45:45 10/06/01 (3)

• Re: lamda conversion - Robert Bondi 23:45:54 10/07/01 (0)
• Re: lamda conversion - Troy Rudolph 18:58:31 10/06/01 (0)
• Re: lamda conversion - Peter Florance 18:00:05 10/06/01 (0)

81 528i oil in intake - Dave 12:16:34 10/06/01 (0)

Fuel rail - T. Han 23:04:46 10/05/01 (4)

• Re: Fuel rail - ...tom 05:46:38 10/06/01 (3)
  • Re: Fuel rail - T. Han 12:04:28 10/06/01 (2)
    • by jove, you've got it ;>) - ...tom 13:09:38 10/06/01 (0)
    • Re: Fuel rail - Whalen 12:42:17 10/06/01 (0)

Rusted / bolts broken off - T. Han 23:00:19 10/05/01 (0)

Rust chunks - T. Han 22:53:15 10/05/01 (0)

FS: Wrecked M5 - Wietse 19:05:52 10/05/01 (4)

• Re: FS: Wrecked M5 - Frank H 10:35:06 10/06/01 (2)
  • Wrecked M5 and Project Update - Wietse 11:14:31 10/06/01 (1)
    • Re: Wrecked M5 and Project Update - Frank H 17:44:23 10/06/01 (0)
• Re: FS: Wrecked M5 - Troy Rudolph 20:05:28 10/05/01 (0)

Need advice on installing 320i runners - Bill barrett 17:47:12 10/05/01 (1)

• yes, use e12 gaskets - ...tom 18:22:39 10/05/01 (0)

Power capacity of fader switch - Eric 17:32:46 10/05/01 (1)

• Rewire it! - trubey 17:50:23 10/05/01 (0)

Carb switch lever - T. Han 16:10:22 10/05/01 (2)

• Re: Carb switch lever - Peter Florance 21:09:58 10/05/01 (1)
  • Re: Carb switch lever - T. Han 22:44:43 10/05/01 (0)

Petersen Museum - FREE including lunch! - Eric 13:54:59 10/05/01 (2)

• N.S.T. as a free lunch. Do you have 2 buy a condo? - Trubey 14:14:42 10/05/01 (1)
  • Yes there is! - Eric 15:41:01 10/05/01 (0)

window channel - mike 12:40:45 10/05/01 (1)

• all roads lead to the FAQ section... - Peter Florance 13:40:30 10/05/01 (0)

Exhaust popping (long) - Jim Davis 11:28:07 10/05/01 (3)

• Re: Exhaust popping (long) - mikey 17:51:48 10/05/01 (2)
  • Re: Exhaust popping (long) - Matt B 05:35:28 10/08/01 (0)
  • Re: Exhaust popping (long) - David B 16:07:59 10/07/01 (0)

'81 528i fs in Roundel in MI - Trubey 11:09:00 10/05/01 (2)

• Waiting for return call - fred 21:50:51 10/05/01 (1)
  • Re: Waiting for return call - Fred 11:47:36 10/08/01 (0)

suspension work, stage 1 and fuel injection (more) - FLIP 09:49:44 10/05/01 (15)

• Re: suspension work, stage 1 and fuel injection (more) - Jim Ockner 04:14:34 10/06/01 (0)
• Re: suspension work, stage 1 and fuel injection (more) - stewart 19:25:20 10/05/01 (0)
• Re: suspension work, stage 1 and fuel injection (more) - Ryan Bryan 16:58:52 10/05/01 (2)
  • B&H or B&G? - Don Daynes 17:57:16 10/05/01 (1)
    • B&G...sorry - Ryan Bryan 18:25:10 10/05/01 (0)
• removing injector wiring - ...tom 16:01:55 10/05/01 (0)
• Curious as to price for Bilsteins? - Eric 12:01:38 10/05/01 (1)
  • thanks for tip (more) - FLIP 16:06:44 10/05/01 (0)
• Re: suspension work, stage 1 and fuel injection (more) - Scott 10:09:37 10/05/01 (6)
  • blueprinted - FLIP 10:23:23 10/05/01 (5)
    • Re: blueprinted - Scott 10:29:51 10/05/01 (4)
      • Re: blueprinted - Chris 10:58:28 10/05/01 (0)
      • Re: blueprinted - FLIP 10:51:55 10/05/01 (2)
        • Re: blueprinted - Troy Rudolph 12:00:18 10/05/01 (1)
          • Re: blueprinted - Troy Rudolph 12:01:47 10/05/01 (0)

Ryan Bryan's "NEW" ride - Beamher Bob 08:29:16 10/05/01 (1)

• Re: Ryan Bryan's "NEW" ride - Ryan Bryan 16:49:48 10/05/01 (0)

Any Chance E23 Euro Bumpers Will fit a 5?? - Chris 02:49:31 10/05/01 (4)

• Re: Any Chance E23 Euro Bumpers Will fit a 5?? - Mark 04:03:12 10/05/01 (3)
  • Re: Any Chance E23 Euro Bumpers Will fit a 5?? - Peter Florance 06:37:05 10/05/01 (2)
    • Re: Any Chance E23 Euro Bumpers Will fit a 5?? - Mark 07:21:48 10/05/01 (1)
      • Thanks for the answers. It was worth a try. (nt) - Chris 10:49:36 10/05/01 (0)

FS: 320i intake runners - David 00:42:04 10/05/01 (3)

• Re: FS: 320i intake runners - Patrick 08:32:28 10/05/01 (1)
  • Re: FS: 320i intake runners - David 12:59:37 10/05/01 (0)
• Re: FS: 320i intake runners - Robert Bondi 06:56:35 10/05/01 (0)

Lights!Action!CUT!!! - Mark Phillips 23:04:42 10/04/01 (1)

• Re: Lights!Action!CUT!!! - stewart 18:13:50 10/06/01 (0)

Unrelated- anybody know if '84 323i is L-Jet? NT - Trubey 21:51:40 10/04/01 (1)

• Re: Unrelated- anybody know if '84 323i is L-Jet? NT - Mark 22:13:05 10/04/01 (0)

Homemade Cold air intake - Chad Z 20:07:24 10/04/01 (5)

• Re: Homemade Cold air intake - Raj 02:19:23 10/09/01 (1)
  • Re: Have you seen TCD's intake??nice huh? - Scott 12:43:04 10/09/01 (0)
• Re: Homemade Cold air intake..Go for it! - Scott 09:18:09 10/05/01 (0)
• Re: Homemade Cold air intake - Matt B 21:45:08 10/04/01 (1)
  • Re: Homemade Cold air intake - Mark 22:18:09 10/04/01 (0)

wtb: airflow meter for '80 528i - Dale Beuning 17:54:21 10/04/01 (1)

• Re: wtb: airflow meter for '80 528i - Sam Schultz 19:47:23 10/04/01 (0)

Getrag 4 speed on eBay - Jim Davis 15:01:24 10/04/01 (1)

• oops...link fixed - Jim Davis 15:02:21 10/04/01 (0)

Paging Mike V - Peter Florance 12:25:02 10/04/01 (2)

• Re: Paging Mike V - Mike V. 18:27:40 10/04/01 (1)
  • Re: Paging Mike V - Peter Florance 06:42:59 10/05/01 (0)

spam: have to part with 78 530 $1800 many upgrade - j bruya 10:47:53 10/04/01 (2)

• posting guidelines - above is NOT spam. - Peter Florance 21:46:52 10/04/01 (0)
• Re: spam: have to part with 78 530 $1800 many upgrade - DScott 10:51:54 10/04/01 (0)

Leaks - T.Han 01:02:08 10/04/01 (1)

• Re: Leaks - DScott 10:49:29 10/04/01 (0)

79 528i stumbling - Paul Morrison 23:37:13 10/03/01 (4)

• Re: 79 528i stumbling - Jimmie 16:52:46 10/04/01 (1)
  • Re: 79 528i stumbling - Peter Florance 20:52:04 10/04/01 (0)
• Re: 79 528i stumbling - Peter Florance 06:37:39 10/04/01 (0)
• Re: 79 528i stumbling - Mark 05:08:43 10/04/01 (0)

How do I remove ashen wax look on rubber parts? - Jim Davis 23:06:40 10/03/01 (4)

• Re: How do I remove ashen wax look on rubber parts? - Mr. BILL 10:30:29 10/04/01 (2)
  • Heard about the PB trick, But had a problem. - Lars PNW 81_528i 11:14:24 10/04/01 (1)
    • OH BTW.... Don't use Chunky Style - Lars 11:15:39 10/04/01 (0)
• Re: How do I remove ashen wax look on rubber parts? - T. Han 00:40:02 10/04/01 (0)

AFM calibration - I tried it - Jim Davis 23:03:53 10/03/01 (4)

• Re: AFM calibration - I tried it - Peter Florance 08:23:54 10/04/01 (2)
  • Re: AFM calibration - I tried it - Jim Davis 09:56:17 10/04/01 (1)
    • Re: AFM calibration - I tried it - Peter Florance 11:07:40 10/04/01 (0)
• Re: AFM calibration - I tried it - Kaveman 23:25:10 10/03/01 (0)

Car of the Month - October - Troy Rudolph 22:28:43 10/03/01 (5)

• Thanks. I'm honored. - Dean 15:34:22 10/04/01 (0)
• Re: Car of the Month - October - Mr. BILL 10:32:56 10/04/01 (0)
• Re: Car of the Month - October - DScott 10:32:47 10/04/01 (0)
• error - FLIP 10:02:16 10/04/01 (0)
• Re: Car of the Month - October - Mark 05:05:18 10/04/01 (0)

Rubber shift boot - T. Han 20:14:06 10/03/01 (3)

• Re: Rubber shift boot - Jeff Ross 23:24:35 10/08/01 (0)
• Re: Rubber shift boot - garry 23:58:21 10/03/01 (1)
  • Re: Rubber shift boot - T. Han 00:27:03 10/04/01 (0)

Rear shock/spring perches...an adjustment question - Mishast 19:49:12 10/03/01 (1)

• Bilsteins have 2 grooves in shock body? - Eric 20:05:09 10/03/01 (0)

FS: Grant Steering Wheel - Kaveman 17:33:49 10/03/01 (1)

• Please send me an e-mail with pics... - Eric 19:00:27 10/03/01 (0)

Head Re-Torque.... - Kaveman 17:26:27 10/03/01 (12)

• Opposing View from the resident troublemaker - Lars PNW 81_528i 16:11:54 10/04/01 (4)
  • Re: Opposing View from the resident troublemaker - Peter Florance 06:30:18 10/05/01 (2)
    • Re: Opposing View from the resident troublemaker - Scott 11:08:36 10/05/01 (1)
      • Re: Opposing View from the resident troublemaker - Peter Florance 14:38:09 10/05/01 (0)
  • Re: Opposing View from the resident troublemaker - Kaveman 21:42:56 10/04/01 (0)
• A couple of newbie questions - DScott 10:38:38 10/04/01 (2)
  • Re: A couple of newbie questions(longish) - Kaveman 20:03:26 10/04/01 (0)
  • Re: A couple of newbie questions - Scott 15:19:46 10/04/01 (0)
• Re: Head Re-Torque.... - Jeff C 08:03:49 10/04/01 (3)
  • Re: Head Re-Torque.... - Frank H 19:18:23 10/04/01 (0)
  • Re: Head Re-Torque.... - farokh 15:13:28 10/04/01 (1)
    • Re: Head Re-Torque.... - Peter Florance 20:53:07 10/04/01 (0)

BMW meet for the S.East...on other board,(link) - Scott 15:11:36 10/03/01 (0)

Ignition rotor - T. Han 14:17:53 10/03/01 (3)

• Re: Ignition rotor - Kaveman 17:35:02 10/03/01 (2)
  • Re: Ignition rotor - T. Han 20:07:51 10/03/01 (1)
    • Re: Ignition rotor - Matt B 22:27:16 10/03/01 (0)

FS: List modified (new items) and prices lowered - TCD 14:10:54 10/03/01 (0)

Anyone in the Bay area looked at Peter Ford's '80 - J Betts 20:57:28 10/02/01 (2)

• Re: Anyone in the Bay area looked at Peter Ford's '80 - Kaveman 21:15:12 10/02/01 (1)
  • Thanks Kaveman - J Betts 08:58:30 10/03/01 (0)

Starter question. - Carlie Bentley 20:24:31 10/02/01 (0)

front window - farokh 20:03:46 10/02/01 (5)

• Check placement of bottom bracket on glass - Lars PNW 81_528i 11:20:42 10/03/01 (0)
• Re: front window - Mishast 10:43:13 10/03/01 (0)
• Re: front window - DScott 09:38:00 10/03/01 (2)
  • Re: front window - farokh 13:31:21 10/03/01 (1)
    • Re: front window - farokh 15:49:07 10/06/01 (0)

Going to synthetic oil - Mike V. 19:49:09 10/02/01 (6)

• Re: Going to synthetic oil - Jim Davis 10:09:49 10/03/01 (0)
• Re: Going to synthetic oil - Carlie Bentley 20:18:55 10/02/01 (0)
• Re: Going to synthetic oil - greghill 20:18:31 10/02/01 (3)
  • Re: Going to synthetic oil - Mark 08:57:59 10/03/01 (2)
    • Re: Going to synthetic oil - Mishast 10:50:11 10/03/01 (1)
      • Re: Going to synthetic oil - Mark 21:33:26 10/03/01 (0)

528i speedo/odometer - Kurt 19:20:58 10/02/01 (7)

• Someone has an odometer fix method here - DScott 09:48:27 10/03/01 (4)
  • replacing speedo/odo - Greg 10:22:13 10/03/01 (0)
  • Re: Someone has an odometer fix method here - Peter Florance 10:20:23 10/03/01 (2)
    • Was it Don Daynes with the gear fix? EOM - Jeff C 11:45:31 10/03/01 (1)
      • Re: Was it Don Daynes with the gear fix? EOM - Don Daynes 12:13:46 10/03/01 (0)
• Just think! - Sam R. 00:14:06 10/03/01 (0)
• Re: 528i speedo/odometer - greghill 20:24:17 10/02/01 (0)

lost link - Karl 16:37:55 10/02/01 (0)

Calipers - Don Daynes 15:42:25 10/02/01 (26)

• Re: Calipers - Canadian Bimmer 05:58:39 10/04/01 (0)
• Re: get 745i brakes for an upgrade... - Bill Bowes 18:23:40 10/03/01 (0)
• Don't split those calipers - Bill Bowes 18:26:35 10/02/01 (3)
  • Re: Don't split those calipers - Don Daynes 02:25:03 10/03/01 (0)
  • any timing guess - greghill 20:32:53 10/02/01 (1)
    • Re: any timing guess - Peter Florance 20:41:48 10/02/01 (0)
• Re: Calipers - Peter Florance 15:57:59 10/02/01 (19)
  • Re: Calipers - Don Daynes 16:46:45 10/02/01 (18)
    • Re: Calipers - David B 00:38:34 10/03/01 (11)
      • big front brakes (longish) - Peter Florance 07:40:19 10/03/01 (0)
      • Re: Calipers - Don Daynes 02:10:48 10/03/01 (9)
        • Re: Calipers/disc dia. - David B 01:02:19 10/04/01 (8)
          • Re: Calipers/disc dia. - Don Daynes 11:14:32 10/04/01 (1)
            • Re: Calipers/disc dia. - David B 00:40:08 10/05/01 (0)
          • Re: Calipers/disc dia. what the?? - Scott 09:33:00 10/04/01 (5)
            • Re: Calipers/disc dia. what the?? - Don Daynes 10:44:55 10/04/01 (4)
              • Re: Cars/dsc di. wht th??..ooohhhh - Scott 12:41:54 10/04/01 (3)
                • Re: Cars/dsc di. wht th??..ooohhhh - David B 00:21:25 10/05/01 (1)
                  • Re: yer tellin me!! - Scott 09:28:28 10/05/01 (0)
                • Re: Cars/dsc di. wht th??..ooohhhh - Don Daynes 13:54:28 10/04/01 (0)
    • Re: Calipers - Peter Florance 17:34:31 10/02/01 (5)
      • Re: Calipers - Frank H 21:45:24 10/02/01 (4)
        • Now stretch bolts - Don Daynes 02:33:30 10/03/01 (0)
        • Re: Calipers - Don Daynes 01:33:19 10/03/01 (2)
          • Correction - Don Daynes 15:43:20 10/03/01 (0)
          • Re: Calipers - Frank H 09:34:35 10/03/01 (0)

New ate front brake calipers on ebay - Martyn Smith 11:47:17 10/02/01 (5)

• Expensivo - Mishast 15:20:02 10/02/01 (4)
  • Re: Expensivo - Troy Rudolph 21:59:35 10/02/01 (0)
  • Re: Expensivo - FLIP 15:27:38 10/02/01 (2)
    • Re: Expensivo - Mishast 15:29:54 10/02/01 (1)
      • Re: Expensivo - Jeff C 15:35:57 10/02/01 (0)

WHats the best clutch for the 3.5l and where?? - adam 10:05:04 10/02/01 (6)

• Re: WHats the best clutch for the 3.5l and where?? - Bill Bowes 18:30:59 10/02/01 (0)
• Re: WHats the best clutch for the 3.5l and where?? - Frank h 17:29:24 10/02/01 (0)
• Re: WHats the best clutch for the 3.5l and where?? - Karl 16:36:07 10/02/01 (0)
• Re: WHats the best clutch for the 3.5l and where?? - Peter Florance 15:16:45 10/02/01 (1)
  • Re: WHats the best clutch for the 3.5l and where?? - Kaveman 19:01:30 10/02/01 (0)
• Re: WHats the best clutch for the 3.5l and where?? - Troy Rudolph 12:24:01 10/02/01 (0)

Euro Bumpers, new and complete, still available - NorCal BMW Junkie 09:51:36 10/02/01 (0)

1979 "520" imported from Germany - Chris 01:38:04 10/02/01 (8)

• 520 designations... - Eric 19:54:06 10/02/01 (0)
• all the answers - Sam Schultz 17:45:49 10/02/01 (0)
• Suggestions and questions - DScott 16:45:22 10/02/01 (3)
  • Re: Suggestions and questions - Chris 01:43:20 10/03/01 (2)
    • Re: Suggestions and questions - Bob Iverach 19:45:09 10/03/01 (1)
      • Re: Suggestions and questions - Sam Schutlz 19:16:31 10/07/01 (0)
• Re: 1979 "520" imported from Germany - Mark 02:55:47 10/02/01 (0)
• This guy needs some history on this model. - Sheila 01:51:02 10/02/01 (0)

One Lap Advice - Peter Maag 00:32:06 10/02/01 (12)

• Remember Bugs Bunny? - Carlie Bentley 11:25:18 10/03/01 (0)
• Re: One Lap Advice - Scott 09:13:58 10/03/01 (0)
• Re: One Lap Advice - Bill Bowes 19:00:35 10/02/01 (2)
  • 318ti with 400HP? - FLIP 10:14:26 10/03/01 (0)
  • E36 318ti? - Peter Florance 07:43:08 10/03/01 (0)
• Re: One Lap Advice - Karl 12:16:23 10/02/01 (0)
• Re: One Lap Advice - Frank H 11:03:42 10/02/01 (0)
• Re: One Lap Advice - FLIP 10:05:47 10/02/01 (0)
• Re: One Lap Advice - Trubey 09:18:27 10/02/01 (0)
• Re: One Lap Advice - Peter Florance 07:28:58 10/02/01 (2)
  • correction - Peter Florance 07:32:29 10/02/01 (1)
    • Re: correction - Karl 12:07:12 10/02/01 (0)

Chrome fender trim-anybody ever use it? - Michael Longeneker 00:23:48 10/02/01 (2)

• Re: Chrome fender trim-anybody ever use it? - Mishast 15:27:00 10/02/01 (0)
• Re: Chrome fender trim-anybody ever use it? - Robert Bondi 09:49:56 10/02/01 (0)

E28 Radiator - Chris 21:46:55 10/01/01 (3)

• Re: E28 Radiator - Peter Claasen 19:05:57 10/02/01 (0)
• Re: E28 Radiator - Peter Florance 07:04:38 10/02/01 (0)
• Flow direction may be different - Lars PNW 81_528i 01:24:37 10/02/01 (0)

One more stupid wheel ???... - Ryan Bryan 17:46:44 10/01/01 (1)

• Re: One more stupid wheel ???... - Eric 19:04:39 10/01/01 (0)

Goo Removal - Troy Rudolph 15:18:59 10/01/01 (8)

• Re: Goo Removal - Frank H 23:50:14 10/02/01 (0)
• Re: Goo Removal - T. Han 22:20:27 10/01/01 (0)
• Re: Goo Removal - Kaveman 16:50:03 10/01/01 (0)
• WD40 - Peter Florance 16:17:00 10/01/01 (0)
• I know the feeling. - Carlie Bentley 15:58:39 10/01/01 (3)
  • Troy..Try GOO GONE... - Scott 16:20:22 10/01/01 (2)
    • never mind..your surface is painted... - Scott 16:21:47 10/01/01 (1)
      • Ok on painted surfaces - Peter Florance 21:48:52 10/01/01 (0)

These look like alplina wheels on ebay... - Martyn Smith 14:46:16 10/01/01 (4)

• Standard 7 series turbines - Eric 00:03:53 10/02/01 (0)
• Re: These look like alplina wheels on ebay... - Scott 14:50:41 10/01/01 (2)
  • Re: These look like alplina wheels on ebay... - T. Han 15:14:12 10/01/01 (0)
  • Re: These look like alplina wheels on ebay... - Sam Schutlz 15:03:22 10/01/01 (0)

85 HD, differences?,HP?, cooling?,what are they? - Scott 14:19:25 10/01/01 (4)

• I think.... - Carlie Bentley 16:19:59 10/01/01 (0)
• Re: 85 HD, differences?,HP?, cooling?,what are they? - Troy Rudolph 14:24:45 10/01/01 (2)
  • Re: 85 HD, ok..ok my bad...." head" - Scott 14:30:14 10/01/01 (1)
    • Re: 85 HD, ok..ok my bad...." head" - Troy Rudolph 15:15:03 10/01/01 (0)

E12 Storage questions - kendrick 12:23:52 10/01/01 (5)

• Joke first, then on to topic of storage. - Carlie Bentley 16:36:10 10/01/01 (1)
  • Re: Joke first, then on to topic of storage. - T. Han 22:31:28 10/01/01 (0)
• Re: E12 Storage questions - Randy McCafferty 14:24:29 10/01/01 (1)
  • Re: E12 Storage questions - Scott 14:34:55 10/01/01 (0)
• Re: E12 Storage questions - Chuck Denson 13:10:40 10/01/01 (0)

Leak? - Kaveman 12:02:59 10/01/01 (16)

• Don't Break a head bolt.... - Lars PNW 81_528i 20:55:47 10/01/01 (3)
  • Re: Don't Break a head bolt.... - David B 22:52:11 10/01/01 (0)
  • Re: Don't Break a head bolt.... - T. Han 22:39:59 10/01/01 (0)
  • Re: Don't Break a head bolt.... - Kaveman 21:31:46 10/01/01 (0)
• Just a thought, on the leak. - Carlie Bentley 16:07:07 10/01/01 (2)
  • Re: Just a thought, on the leak. - Kaveman 16:47:53 10/01/01 (1)
    • Re: Just a thought, on the leak. - Carlie Bentley 17:46:58 10/01/01 (0)
• Re: Leak? - Jeff C 15:21:53 10/01/01 (0)
• Regarding the pic post-- Here's the trick - Lars PNW 81_528i 13:03:39 10/01/01 (0)
• Here's the pic Re: Leak? - Peter Florance 12:10:08 10/01/01 (6)
  • Re: Here's the pic Re: Leak? - Kaveman 12:39:08 10/01/01 (3)
    • Works for me - Don Daynes 12:44:28 10/01/01 (2)
      • Re: Works for me - Kaveman 12:51:16 10/01/01 (1)
        • Coolant leak - Don Daynes 13:37:54 10/01/01 (0)
  • no doesn't work - Peter Florance 12:11:25 10/01/01 (1)
    • Thought it was only me - Don Daynes 12:17:57 10/01/01 (0)

530ti - Johnny 10:40:16 10/01/01 (4)

• Re: 530ti - Frank H 23:54:20 10/02/01 (0)
• Re: 530ti - Sam Schultz 14:34:22 10/01/01 (2)
  • Re: 530ti - Johnny 15:06:29 10/01/01 (1)
    • Re: 530ti - Sam Schultz 16:46:35 10/01/01 (0)

WTB: Front license plate bracket and hardware - Randy McCafferty 10:33:31 10/01/01 (1)

• Hey Randy, give me a couple of days ... + - Andre528i 12:37:29 10/02/01 (0)

New heads and plugs--longish - DScott 10:16:46 10/01/01 (6)

• Putting a new (rebuilt) head on an older block. - Carlie Bentley 16:15:38 10/01/01 (0)
• Sean makes a good point..... This happens often - Lars PNW 81_528i 13:12:46 10/01/01 (1)
  • Re: Sean makes a good point..... This happens often - DScott 13:25:54 10/01/01 (0)
• Re: New heads and plugs--longish - Kaveman 11:54:33 10/01/01 (0)
• Cross threaded head - Martyn Smith 10:31:21 10/01/01 (0)
• The plug is not a big problem. - Lars PNW 81_528i 10:30:48 10/01/01 (0)

77 530i - BMWWIZARD 10:14:48 10/01/01 (2)

• Location? (eom) - Greg 12:33:43 10/01/01 (1)
  • Re: Location - David 00:02:00 10/02/01 (0)

Received my Alpina Spoiler now what? - Matt Evans 01:53:04 10/01/01 (2)

• Install it? - Sam R. 12:47:07 10/01/01 (0)
• Install it? - Sam R. 12:46:46 10/01/01 (0)

Dual element tailight mod - Don Daynes 00:08:26 10/01/01 (2)

• Re: Dual element tailight mod - Carlie Bentley 14:31:42 10/01/01 (1)
  • Re: Dual element tailight mod - Karl 20:34:46 10/01/01 (0)

Clean valve cover - T.Han 21:21:49 09/30/01 (1)

• Re: Clean valve cover - Carlie Bentley 17:49:24 10/01/01 (0)

spring's - Stan 21:00:29 09/30/01 (5)

• Re: spring's - STAN 07:56:58 10/01/01 (3)
  • Do you mean E12 M535i springs? - Eric 19:18:34 10/01/01 (1)
    • Re: Do you mean E12 M535i springs? - STAN 16:06:16 10/02/01 (0)
  • Re: spring's - Don Daynes 09:23:19 10/01/01 (0)
• Re: spring's - Don Daynes 22:59:51 09/30/01 (0)

New rear shock options? - TCD 14:03:35 09/30/01 (7)

• Re: New rear shock options? - Frank h 17:17:28 09/30/01 (1)
  • Re: New rear shock options/ springs first - David B 22:27:34 09/30/01 (0)
• Re: FS Bilstein sports! - David B 15:56:58 09/30/01 (1)
  • SOLD - TCD 08:57:41 10/01/01 (0)
• Shades of old Hot Rod Days..... - Lars 81_528i 14:20:10 09/30/01 (2)
  • Re: Shades of old Hot Rod Days..... - Scott 10:40:33 10/01/01 (1)
    • Agreed on progressive.... However>>> - Lars PNW 81_528i 11:41:58 10/01/01 (0)

Thanks ! - Klaus Wiehl 07:00:48 09/30/01 (0)

Is E21 323i a Euro car? - Robert Bondi 02:37:09 09/30/01 (3)

• Re: Is E21 323i a Euro car? - Timmer 16:03:24 09/30/01 (0)
• Re: Is E21 323i a Euro car? - Eric 14:43:12 09/30/01 (0)
• Re: Is E21 323i a Euro car? - Mark 03:54:52 09/30/01 (0)

FS / 78 530i//lost my head - Dennis 00:23:21 09/30/01 (1)

• Re: FS / 78 530i//lost my head - Scott 10:44:29 10/01/01 (0)

Thermostat etc. - T. Han 23:57:09 09/29/01 (3)

• Re: Thermostat etc. - Peter Florance 10:44:43 09/30/01 (1)
  • Re: Thermostat etc. - T. Han 21:06:37 09/30/01 (0)
• Re: Thermostat etc. - Trubey 00:04:32 09/30/01 (0)

AFM's - T. Han 23:37:23 09/29/01 (5)

• Re: AFM's - Kaveman 00:04:13 09/30/01 (4)
  • Re: AFM's - Robert Bondi 02:22:49 09/30/01 (2)
    • Re: AFM's - T. Han 22:45:15 10/01/01 (1)
      • Re: AFM's - Kaveman 19:07:52 10/02/01 (0)
  • Re: AFM's - T. Han 01:55:46 09/30/01 (0)

Nothing really... - Dave Spencer 20:17:30 09/29/01 (1)

• Re: uh-oh dave - Scott 11:44:14 10/01/01 (0)

Will 323i e21 intake runners fit??? - RB 20:02:24 09/29/01 (1)

• Re: Will 323i e21 intake runners fit??? - Mark 03:56:54 09/30/01 (0)

FS/ 78 530i - Dennis 17:47:13 09/29/01 (0)

Peter F., need your addr to send C-tubes - Jim Ockner 14:01:51 09/29/01 (1)

• Re: Peter F., need your addr to send C-tubes - Peter Florance 15:07:25 09/29/01 (0)

choices choices e12vs e28 - raymon 13:41:38 09/29/01 (3)

• Sad to say - Trubey 17:31:01 09/29/01 (0)
• Re: choices choices e12vs e28 - Michael Longeneker 15:30:50 09/29/01 (1)
  • Re: choices choices e12vs e28 - Mark 21:56:42 09/29/01 (0)

hey lars, can you find a rust-free e12 for me? - ...tom 12:47:52 09/29/01 (8)

• Tom, where are you & what shipping $ have you seen - J Betts 14:17:16 09/29/01 (1)
  • Re: Tom, where are you & what shipping $ have you seen - ...tom 16:58:48 09/29/01 (0)
• What's you're criteria? - Eric 13:38:56 09/29/01 (5)
  • no rust, no rust, no rust, oh, and good paint - ...tom 17:04:43 09/29/01 (0)
  • One here nearby... - Eric 13:46:17 09/29/01 (3)
    • Re: One here nearby... - Harold 19:50:21 09/29/01 (2)
      • Re: One here nearby... - Eric 23:47:23 09/29/01 (1)
        • Re: One here nearby... - Harold 00:32:40 09/30/01 (0)

Wiper Arm.... - Martyn Smith 12:09:37 09/29/01 (0)

411 for 95 toyota pickup - Angel 10:52:17 09/29/01 (2)

• Re: 411 for 95 toyota pickup - raymon 13:33:17 09/29/01 (0)
• Sorry Angel, wrong board - Jim Davis 11:10:10 09/29/01 (0)

engine breaks up at 5k rpm - ...tom 09:23:32 09/29/01 (3)

• Re: engine breaks up at 5k rpm - Peter Florance 09:28:41 09/29/01 (2)
  • Re: engine breaks up at 5k rpm - Whalen 09:51:34 09/29/01 (1)
    • Re: engine breaks up at 5k rpm - Peter Florance 13:40:04 09/29/01 (0)

Cam lobe - T. Han 19:45:27 09/28/01 (1)

• Re: Cam lobe - Karl 20:50:27 10/01/01 (0)

Timing chain - T. Han 19:43:30 09/28/01 (6)

• Re: Timing chain - Mike V. 19:27:26 09/30/01 (0)
• Re: Timing chain - Frank h 21:25:52 09/28/01 (4)
  • Re: Timing chain - T. Han 01:43:11 09/29/01 (3)
    • Re: Timing chain - Frank H 11:47:47 09/29/01 (2)
      • Re: Timing chain - David B 16:12:00 09/30/01 (1)
        • Re: Timing chain - Don Daynes 17:22:33 09/30/01 (0)

Confirm or deny starter switch wire color - Trubey 19:30:56 09/28/01 (1)

• Re: Confirm or deny starter switch wire color - Bob Iverach 19:40:06 09/28/01 (0)

528i ECU on ebay - Peter Florance 17:23:28 09/28/01 (0)

FYI - Jules Verne device pricing info - Jim Davis 14:37:22 09/28/01 (4)

• Re: FYI - Jules Verne device pricing info - T. Han 15:52:58 09/28/01 (3)
  • Re: FYI - Jules Verne device pricing info - Jim Davis 10:26:26 09/29/01 (2)
    • Re: FYI - Jules Verne device pricing info - Robert Bondi 16:55:15 09/30/01 (1)
      • Re: FYI - Jules Verne device pricing info - Peter Florance 18:28:05 09/30/01 (0)

the 1st winding is green 2nd is red what are they? - Stan 12:55:36 09/28/01 (0)

Whats the advantage of 535i springs over 528i ?? - Stan 12:40:57 09/28/01 (0)

Copper washers in A/C lines? - Jason Valerius 12:30:37 09/28/01 (2)

• Re: Copper washers in A/C lines? - Peter Florance 13:43:54 09/28/01 (1)
  • Re: Copper washers in A/C lines? - Peter Claassen 20:02:07 09/28/0onses: 22902-->1)
    • Re: Follow up engine transplant - Troy Rudolph 14:46:11 09/20/01 (0)
  • FS: 16x8 BBS style wheels - Wietse 18:03:52 09/19/01 (0)
  • FS: wheels F16x7 and R16x8 - Wietse 18:02:19 09/19/01 (3)
    • Here's Wheels for MATT!!! - Kaveman 18:08:29 09/19/01 (2)
      • hahahahahaha!!! - Matt 18:20:40 09/19/01 (1)
        • Re: hahahahahaha!!! - Troy Rudolph 22:16:38 09/19/01 (0)
  • Total BMW - Klaus Wiehl 17:25:39 09/19/01 (14)
    • Re: Total BMW - Jim Davis 17:27:42 09/19/01 (13)
      • Re: Total BMW - Klaus Wiehl 17:40:00 09/19/01 (12)
        • Re: Total BMW - Dave Spencer 20:11:50 09/19/01 (0)
        • Dated look? Heavy controls? - Eric 18:53:05 09/19/01 (2)
          • Re: Dated look? Heavy controls? - T. Han 21:48:38 09/19/01 (1)
            • Re: Dated look? Heavy controls? - Dave Spencer 21:59:32 09/19/01 (0)
        • We like the "dated look" - Dean 18:14:28 09/19/01 (7)
          • Re: We like the "dated look" - Mark 22:21:59 09/19/01 (6)
            • no it's a good thing.. - Peter Florance 06:43:54 09/20/01 (5)
              • But what if ... - Mark 23:43:51 09/20/01 (4)
                • Re: But what if ... - Dave Spencer 07:26:55 09/21/01 (3)
                  • Re: But what if ... - Mark 09:37:48 09/21/01 (2)
                    • Re: But what if ...Hey wait a minute... - Scott 15:37:31 09/21/01 (1)
                      • Re: But what if ...Hey wait a minute... - Mark 21:22:27 09/21/01 (0)
  • Will the E30 M3 M Technik II wheel fit an '80 528i - Matt 15:00:58 09/19/01 (9)
    • I have an extra 320is wheel if interested. - Randy McCafferty 08:02:15 09/20/01 (0)
    • Re: Will the E30 M3 M Technik II wheel fit an '80 528i - Troy Rudolph 16:37:20 09/19/01 (0)
    • Re: Will the E30 M3 M Technik II wheel fit an '80 528i - Don Daynes 15:44:21 09/19/01 (0)
    • This is an M-Technic STEERING wheel - Matt 15:33:55 09/19/01 (2)
      • Oh... - Eric 15:45:53 09/19/01 (0)
      • Re: This is an M-Technic STEERING wheel - Peter Florance 15:40:08 09/19/01 (0)
    • Followup measurements - Matt 15:03:01 09/19/01 (2)
      • Diameter? - Eric 15:31:20 09/19/01 (1)
        • P.S. - Eric 15:36:20 09/19/01 (0)
  • WTB: Euro Bumpers!!!!!!!! - Matt 13:38:06 09/19/01 (8)
    • Re: WTB: Euro Bumpers!!!!!!!! - Troy Rudolph (Webmaster) 16:48:27 09/19/01 (0)
    • take a deep breath... (more) - FLIP 15:35:06 09/19/01 (5)
      • Re: take a deep breath... (more) - RB 16:35:53 09/19/01 (4)
        • Re: take a deep breath... (more) - T. Han 22:04:19 09/19/01 (0)
        • sorry jim...now now flip...(eom) - RB 20:01:26 09/19/01 (1)
          • what's next, rap my knuckles with a ruler? (eom) - FLIP 09:47:35 09/20/01 (0)
        • Now now RB. Flip = Flip, Jim Davis = Jim (nt) - Jim Davis 17:25:37 09/19/01 (0)
    • What was wrong the answers you already got? (nt) - Jim Davis 15:22:07 09/19/01 (0)
  • Wanted: Euro Bumpers NEW or USED!!!! - Matt 13:37:20 09/19/01 (0)
  • anyone try bavauto muffler... - billy 13:27:19 09/19/01 (5)
    • Re: anyone try bavauto muffler... - Bob 20:29:53 09/19/01 (0)
    • Re: anyone try bavauto muffler... - fred 14:00:46 09/19/01 (3)
      • how does it sound? - billy 14:08:09 09/19/01 (2)
        • Re: how does it sound? - Bob Iverach 10:55:37 09/22/01 (0)
        • Re: how does it sound? - fred 12:51:19 09/20/01 (0)
  • CS Engine and 4 speed FS - Alex Anduze 12:25:53 09/19/01 (0)
  • Holy TWIN TURBOS Batman!! - TCD 11:28:37 09/19/01 (1)
    • Talk about spaghetti! - Eric 13:05:44 09/19/01 (0)
  • smoke colors? - Silly Newbie 11:07:56 09/19/01 (0)
  • Where to buy? - Mr. Bill 22:47:57 09/18/01 (1)
    • Re: Where to buy? - Sam Schutlz 23:13:36 09/18/01 (0)
  • Oxides of Nitrogen - greghill 19:27:50 09/18/01 (4)
    • Re: Oxides of Nitrogen - Peter Florance 20:58:14 09/18/01 (3)
      • Re: Oxides of Nitrogen - greghill 21:25:44 09/18/01 (2)
        • Re: Oxides of Nitrogen - Peter Florance 07:06:51 09/19/01 (0)
        • Re: Oxides of Nitrogen - Troy Rudolph 21:40:33 09/18/01 (0)
  • M535 Frnt Spoiler Pics - Sam R. 19:16:52 09/18/01 (3)
    • WTF is that black Benz Touring you have!!?? - FLIP 10:25:10 09/19/01 (1)
      • Re: WTF is that black Benz Touring you have!!?? - Sam R. 11:44:44 09/20/01 (0)
    • Me dumbkoff!!!! - Sam R. 19:19:29 09/18/01 (0)
  • M535 Frnt Spoiler Pics - Sam R. 19:16:46 09/18/01 (0)
  • e28 parts for your e12 - mark 16:57:43 09/18/01 (3)
    • Re: e28 parts for your e12 - Peter Claassen 19:04:59 09/18/01 (0)
    • Where in CA? nt - Mr. Coffey 17:51:22 09/18/01 (1)
      • Re: Where in CA? nt - mark 18:16:27 09/18/01 (0)
  • AFM 77 530i - Mike V. 13:28:53 09/18/01 (6)
    • Re: AFM 77 530i - Peter Florance 08:14:09 09/19/01 (0)
    • Re: AFM 77 530i - Jim Davis 23:37:34 09/18/01 (2)
      • J.D. 79 AFM & ECU - Mike V. 00:01:40 09/20/01 (1)
        • Re: J.D. 79 AFM & ECU - Jim Davis 12:32:25 09/20/01 (0)
    • Re: AFM 77 530i - Collins 15:30:18 09/18/01 (0)
    • Re: AFM 77 530i - Peter Florance 13:57:42 09/18/01 (0)
  • Wheel size ...Can these fit??? - Matt 13:15:59 09/18/01 (3)
    • Print this... - Eric 14:31:32 09/18/01 (0)
    • You need 5x120 lug spacing!! - TCD 13:52:12 09/18/01 (1)
      • Re: You need 5x120 lug spacing!! - Mark 00:22:08 09/19/01 (0)
  • sean and peter, bellhousimg question - mikey 12:45:47 09/18/01 (3)
    • Re: sean and peter, bellhousimg question - Kaveman(aka Sean) 15:02:28 09/18/01 (0)
    • Re: sean and peter, bellhousimg question - Peter Florance 13:59:49 09/18/01 (1)
      • Re: sean and peter, bellhousimg question - peter claassen 19:13:47 09/18/01 (0)
  • WOW YELLOW E-12 !!!!! - mike 11:23:05 09/18/01 (0)
  • 320 Intake runner questions. - Carlie Bentley 08:19:31 09/18/01 (5)
    • Re: 320 Intake runner questions. - peter claassen 19:28:10 09/18/01 (0)
    • Re: 320 Intake runner questions. - Karl 18:41:24 09/18/01 (0)
    • Re: 320 Intake runner questions. - Mishast 12:10:57 09/18/01 (1)
      • Re: 320 Intake runner questions. - Mark 20:01:50 09/18/01 (0)
    • Re: 320 Intake runner questions. - Jeff C 10:23:50 09/18/01 (0)
  • cigarette lighter - John 01:08:39 09/18/01 (6)
    • Re: cigarette lighter - john 01:09:28 09/18/01 (5)
      • Re: cigarette lighter - Peter Florance 06:43:42 09/18/01 (4)
        • Re: cigarette lighter - John 23:13:35 09/18/01 (3)
          • Re: cigarette lighter - Peter Florance 08:20:16 09/19/01 (2)
            • Mean, nasty, ugly and horrible - Trubey 23:28:58 09/19/01 (1)
              • that's why.... - Peter Florance 06:39:24 09/20/01 (0)
  • Need help (post engine transplant) - Mike V. 21:03:31 09/17/01 (3)
    • Some suggestions. - Wietse 16:01:43 09/19/01 (0)
    • Re: Need help (post engine transplant) - Karl 18:58:07 09/18/01 (0)
    • Re: Need help (post engine transplant) - Peter Florance 21:17:13 09/17/01 (0)
  • O2 sensor question. - Carlie 18:28:22 09/17/01 (5)
    • Re: O2 sensor question. - Peter Florance 19:06:09 09/17/01 (4)
      • Sorry Let me clarify - Carlie Bentley 19:19:37 09/17/01 (3)
        • Re: Sorry Let me clarify - Karl 19:02:47 09/18/01 (0)
        • Re: Sorry Let me clarify - Peter Florance 19:21:54 09/17/01 (1)
          • Cool thanks. (EOM) - Carlie 19:23:17 09/17/01 (0)
  • 1979 E12 For Sale - Steve Malkos 17:30:09 09/17/01 (4)
    • Re: 1979 E12 For Sale - Mark Phillips 22:40:51 09/18/01 (0)
    • noooo!!! - FLIP 10:02:48 09/18/01 (2)
      • Re: noooo!!! - Steve 15:35:19 09/19/01 (1)
        • Re: noooo!!! - Greg 17:19:37 09/19/01 (0)
  • E12 Cruise So Cal 2001 - Sat. 22, 2001 - Reminder - Don Daynes 17:25:25 09/17/01 (0)
  • Injector voltage difference - Jim Ockner 14:05:01 09/17/01 (4)
    • Re: Injector voltage difference - Don Daynes 17:28:10 09/17/01 (0)
    • Re: Injector voltage difference - Peter Florance 14:27:58 09/17/01 (2)
      • Re: Injector voltage difference - Jim Ockner 16:03:23 09/17/01 (1)
        • Re: Injector voltage difference - Peter Florance 17:06:32 09/17/01 (0)
  • Parting Complete 1979 528i - TCD 13:48:40 09/17/01 (2)
    • Re: Parting Complete 1979 528i - Garry 18:49:30 09/17/01 (1)
      • Waxhaw, NC 28173 near Charlotte - TCD 19:04:43 09/17/01 (0)
  • 3.5 Euro engine? What's it worth? - Mad Dog 12:08:06 09/17/01 (6)
    • Re: 3.5 Euro engine? What's it worth? - Frank H 13:13:27 09/17/01 (2)
      • Re: 3.5 Euro engine? What's it worth? - Don Daynes 15:27:17 09/17/01 (0)
      • Re: 3.5 Euro engine? What's it worth? - Eric 14:48:20 09/17/01 (0)
    • Need details... - Eric 12:22:42 09/17/01 (2)
      • Here is what I know - Mad Dog 12:33:18 09/17/01 (1)
        • Thanks... - Eric 14:39:45 09/17/01 (0)
  • Exterior trim - Damon C 11:15:38 09/17/01 (3)
    • Follow-up - Eric 23:54:35 09/17/01 (0)
    • Re: Exterior trim - Eric 12:19:24 09/17/01 (1)
      • Re: thanks - Damon C 09:37:04 09/19/01 (0)
  • steering woes, please help - billy isbell 11:15:07 09/17/01 (2)
    • Re: steering woes, please help - Chuck Denson 13:24:11 09/17/01 (1)
      • Re: steering woes, please help - DEAN 11:42:32 09/18/01 (0)
  • I'm baaaaack (and hitched) - FLIP 11:04:14 09/17/01 (4)
    • Re: I'm baaaaack (and hitched) - Mark Phillips 22:30:41 09/18/01 (0)
    • Re: I'm baaaaack (and hitched) - Randy McCafferty 08:03:06 09/18/01 (0)
    • Re: I'm baaaaack (and hitched) - Scott 11:27:11 09/17/01 (1)
      • Re: I'm baaaaack (and hitched) - Mark 05:15:14 09/18/01 (0)
  • Where can I buy Euro Bumpers??? - Matt Evans 02:36:32 09/17/01 (4)
    • Re: Where can I buy Euro Bumpers??? - Eddie 11:08:10 09/17/01 (0)
    • Re: Where can I buy Euro Bumpers??? - Don Daynes 10:23:55 09/17/01 (0)
    • Re: Where can I buy Euro Bumpers??? - Peter Florance 06:02:20 09/17/01 (1)
      • Re: Where can I buy Euro Bumpers??? - cam parsonson 22:38:35 10/09/01 (0)
  • "~"~~"~PICS of my NEW interior (FIXED VERSION) - Matt Evans 02:03:43 09/17/01 (1)
    • Re: "~"~~"~PICS of my NEW interior (FIXED VERSION) - Damon C 10:54:59 09/17/01 (0)
  • ~_~_~_~_~_Pics of my NEW interior~_~_~_~_~ - Matt Evans 01:41:36 09/17/01 (0)
  • E28 Alt?... - Kaveman 19:25:39 09/16/01 (4)
    • Re: E28 Alt?... - Trubey 22:30:22 09/16/01 (1)
      • Re: E28 Alt?... - mikey 01:27:42 09/17/01 (0)
    • Re: E28 Alt?... - Carlie Bentley 21:34:42 09/16/01 (1)
      • later e12 also have rubber bushings - Peter Florance 06:03:53 09/17/01 (0)
  • not that different.... - Greg 18:40:10 09/16/01 (2)
    • Hmmm, nope, - Carlie 21:40:34 09/16/01 (1)
      • Re: Hmmm, nope, - Roberto Urbano 00:30:14 09/17/01 (0)
  • Calling Don Daynes - Jim Hineline 17:54:24 09/16/01 (0)
  • Help - Gretchen failed emissions - Jim Davis 13:22:11 09/16/01 (10)
    • Re: Help - Gretchen failed emissions - Michael Longeneker 10:36:56 09/17/01 (1)
      • Re: Help - Gretchen failed emissions - Jim Davis 10:44:12 09/17/01 (0)
    • Re: Help - Gretchen failed emissions - Trubey 16:02:03 09/16/01 (3)
      • Re: Help - Gretchen failed emissions - Jim Davis 16:58:46 09/16/01 (2)
        • Re: Help - Gretchen failed emissions - Trubey 18:32:25 09/16/01 (0)
        • Re: Help - Gretchen failed emissions - Don Daynes 17:08:49 09/16/01 (0)
    • Re: Help - Gretchen failed emissions - Peter Florance 15:46:26 09/16/01 (3)
      • Re: Help - Gretchen failed emissions - Jim Davis 16:54:32 09/16/01 (2)
        • Re: Help - Gretchen failed emissions - Karl 22:38:12 09/16/01 (0)
        • Re: Help - Gretchen failed emissions - Peter Florance 17:47:59 09/16/01 (0)
  • heater H2O valve nightmare - Trubey 13:16:57 09/16/01 (4)
    • Re: heater H2O valve nightmare - T. Han 00:01:15 09/17/01 (1)
      • Re: heater H2O valve nightmare - Peter Florance 07:36:45 09/17/01 (0)
    • Re: heater H2O valve nightmare - Don Daynes 16:53:45 09/16/01 (1)
      • Re: heater H2O valve nightmare - Avery Ward 20:24:55 09/21/01 (0)
  • need a bellhousing - mikey 11:39:20 09/16/01 (0)
  • Interesting Trip to Dealer. - Carlie bentley 09:07:06 09/16/01 (5)
    • Why I use Independent - Karl 22:43:44 09/16/01 (3)
      • Re: Why I use Independent - Mark 05:05:05 09/17/01 (2)
        • Re: Why I use Independent - Jim Hineline 02:34:15 09/19/01 (1)
          • Re: Why I use Independent - Mark 04:15:26 09/19/01 (0)
    • Re: Interesting Trip to Dealer. - Mark 10:47:18 09/16/01 (0)
  • Need a Project Car? - Karl 08:43:35 09/16/01 (0)
  • Groaning Steering - Eric 02:14:38 09/16/01 (2)
    • Re: Groaning Steering - Robert Bondi 05:47:36 09/16/01 (1)
      • Thanks, Robert - Eric 12:25:58 09/17/01 (0)
  • Do-dads - T. Han 23:30:07 09/15/01 (0)
  • 4 to 5 (Troy R.?) - T. Han 23:15:53 09/15/01 (2)
    • Re: 4 to 5 (Troy R.?) - Troy Rudolph 23:31:27 09/15/01 (1)
      • Re: 4 to 5 (Troy R.?) - T. Han 09:22:08 09/16/01 (0)
  • I think my e12 is dead..... : ( - David 22:42:53 09/15/01 (4)
    • Re: I think my e12 is dead..... : ( - Peter Florance 22:50:57 09/15/01 (3)
      • Re: I think my e12 is dead..... : ( - David 23:02:43 09/15/01 (2)
        • Like Projects?? - Karl 08:52:30 09/16/01 (0)
        • Re: I think my e12 is dead..... : ( - Peter Florance 06:42:26 09/16/01 (0)
  • Attn: Baltimore-area parts hunters - Tim in MD 22:12:33 09/15/01 (0)
  • e12 for sale - Mark Mucciacciaro 21:41:16 09/15/01 (0)
  • side question - Dennis 16:02:29 09/15/01 (1)
    • Year, options, miles, condition? eom - Trubey 20:05:22 09/15/01 (0)
  • Intermittant Starts - Dave Spencer 14:12:04 09/15/01 (0)
  • Glass repair tips?? - DScott 12:30:50 09/15/01 (0)
  • Temp Gage Reading - Bob 12:29:04 09/15/01 (4)
    • Re: Temp Gage Reading - Walt Barie 10:14:07 09/17/01 (1)
      • Re: Temp Gage Reading - Trubey 21:37:44 09/17/01 (0)
    • Re: Temp Gage Reading - Don Daynes 17:02:45 09/16/01 (0)
    • Re: Temp Gage Reading - Robert Bondi 05:26:01 09/16/01 (0)
  • Where to purchase G-tech? - Bill Barrett 11:17:56 09/15/01 (0)
  • test - Dave Spencer 00:04:33 09/15/01 (1)
    • Son of test... - Dave Spencer 00:08:17 09/15/01 (0)
  • Engine swap - T. Han 22:34:29 09/14/01 (1)
    • Re: Engine swap - Carlie Bentley 08:41:41 09/16/01 (0)
  • Fuel rail, injectors etc. - T. Han 22:25:30 09/14/01 (2)
    • Injector Cleaning - Chris 22:14:00 09/16/01 (0)
    • Re: Fuel rail, injectors etc. - ...tom 15:54:56 09/15/01 (0)
  • Anyone want a mechanic buddy? - Todd Mayfield 20:20:24 09/14/01 (6)
    • Anyone in San Francisco? - Dean 03:08:22 09/17/01 (1)
      • Re: Anyone in San Francisco? - Kaveman 11:25:00 09/17/01 (0)
    • Re: Anyone want a mechanic buddy? - Dave Spencer 22:48:15 09/14/01 (1)
      • Re: Anyone want a mechanic buddy? - Dave Spencer 22:51:44 09/14/01 (0)
    • Re: Anyone want a mechanic buddy? In So.Ca???? - Donna 22:35:08 09/14/01 (0)
    • Anywhere near Dallas? (nt) - Jim Davis 21:58:09 09/14/01 (0)
  • CV Joints on Ebay - Peter Florance 17:36:45 09/14/01 (0)
  • Anybody going to the Charlotte Autofair tomorrow? - TCD 13:58:19 09/14/01 (1)
    • Re: Anybody going to the Charlotte Autofair tomorrow? - Sam Schultz 15:58:41 09/14/01 (0)
  • New European Bumpers For Sale - David Simmons 13:40:52 09/14/01 (1)
    • Re: New European Bumpers For Sale - r lovette 21:13:53 09/15/01 (0)
  • how do i wire a euro motoronic 81 motor to e-12's - Adam aka DR SAWZALL 12:55:26 09/14/01 (2)
    • Re: how do i wire a euro motoronic 81 motor to e-12's - ...tom 17:31:18 09/14/01 (0)
    • Re: how do i wire a euro motoronic 81 motor to e-12's - Scott McGehee 15:15:53 09/14/01 (0)
  • Anyone use NetMeeting? - Carlie Bentley 08:19:30 09/14/01 (0)
  • Spied another E12. - Carlie Bentley 07:57:58 09/14/01 (10)
    • I know how you feel... - Eric 15:24:53 09/14/01 (0)
    • Re: Spied another E12. - Kaveman 12:34:03 09/14/01 (1)
      • Dark Color 3.0S? - Eric 15:15:54 09/14/01 (0)
    • Just Remember This>>>>>>>>>>>> - Lars PNW 81_528i 11:07:04 09/14/01 (0)
    • Re: Spied another E12. - Mark 08:26:58 09/14/01 (5)
      • Re: Spied another E12. - Roberto Urbano 15:57:27 09/14/01 (4)
        • Re: Spied another E12. - Roberto Urbano 15:58:29 09/14/01 (3)
          • Re: Spied another E12. - Carlie Bentley 00:45:20 09/15/01 (1)
            • Re: Spied another E12. - Roberto Urbano 01:20:33 09/15/01 (0)
          • Re: Spied another E12. - Mark 21:11:04 09/14/01 (0)
  • Alpina vs. M535i Front spoiler - Matt Evans 04:24:56 09/14/01 (2)
    • Re: Alpina vs. M535i Front spoiler - Eddie 14:07:16 09/14/01 (0)
    • Re: Alpina vs. M535i Front spoiler - Mark 07:16:40 09/14/01 (0)
  • fuel lines - stewart 03:00:18 09/14/01 (2)
    • Re: fuel lines - Martyn Smith 09:05:49 09/14/01 (0)
    • Re: fuel lines - Peter Florance 06:29:12 09/14/01 (0)
  • Is a 535is an E12? - Donna 00:15:43 09/14/01 (5)
    • Re: Is a 535is an E12? - Harold 19:45:01 09/14/01 (0)
    • No... - Lars PNW 81_528i 15:24:38 09/14/01 (0)
    • Re: Is a 535is an E12? - Mark 02:31:22 09/14/01 (2)
      • Re: Is a 535is an E12? - Donna 22:39:40 09/14/01 (1)
        • Re: Is a 535is an E12? - Michael Longeneker 00:09:06 09/15/01 (0)
  • ~~~~~~~NEW PICS of my 1980 528i ~~~~~~ - Matt Evans 23:10:31 09/13/01 (3)
    • WOW thats all I have to say - Martyn Smith 09:10:10 09/14/01 (0)
    • Re: ~~~~~~~NEW PICS of my 1980 528i ~~~~~~ - Troy Rudolph 09:09:34 09/14/01 (0)
    • Re: ~~~~~~~NEW PICS of my 1980 528i ~~~~~~ - Timmer 06:33:22 09/14/01 (0)
  • How do I post Pics on this Bulletin Board? - Matt Evans 21:48:18 09/13/01 (1)
    • Re: How do I post Pics on this Bulletin Board? - Troy Rudolph (Webmaster) 21:57:56 09/13/01 (0)
  • Anybody have good used stock exhaust system? - Eric 18:20:46 09/13/01 (2)
    • Re: Anybody have good used stock exhaust system? - Garry 00:23:39 09/14/01 (1)
      • Re: Anybody have good used stock exhaust system? - stewart 03:19:00 09/14/01 (0)
  • More 79 528i Failure to Start - Jim Ockner 16:28:27 09/13/01 (8)
    • Re: More 79 528i Failure to Start - Peter Florance 19:03:04 09/13/01 (7)
      • Re: More 79 528i Failure to Start - Jim Ockner 19:46:14 09/13/01 (6)
        • Re: More 79 528i Failure to Start - Peter Florance 21:02:37 09/13/01 (5)
          • Re: More 79 528i Failure to Start - Jim Ockner 10:39:50 09/14/01 (4)
            • Re: More 79 528i Failure to Start - Peter Florance 10:54:19 09/14/01 (3)
              • Re: More 79 528i Failure to Start - Dave Spencer 20:20:35 09/14/01 (1)
                • check combo relay faq - Peter Florance 07:41:44 09/15/01 (0)
              • Thanks, I'll keep you posted. - Jim Ockner 11:03:33 09/14/01 (0)
  • Has anyone used S/T springs? - Ryan Bryan 16:26:54 09/13/01 (4)
    • Re: Has anyone used S/T springs? - Eric 18:11:58 09/13/01 (2)
      • ATT: Scott McGehee...do you still have eibachs? - Ryan Bryan 20:39:55 09/13/01 (1)
        • yes! please contact my me via E-mail.... - scottie 00:37:05 09/14/01 (0)
    • Call ASI @ 619-444-9766 ask for Todd - TCD 18:01:50 09/13/01 (0)
  • How do I post Pics on this BB??? - Matt Evans 16:26:04 09/13/01 (0)
  • About to Purchase Alpina Front Spoiler Need Advice - Matt Evans 16:24:16 09/13/01 (0)
  • Wanted: Adjustable fuel pressure regulator - Bill Barrett 14:38:14 09/13/01 (1)
    • I think Don Daynes had one - also.. - Peter Florance 07:08:08 09/14/01 (0)
  • Heater hoses - Mike V. 13:21:32 09/13/01 (2)
    • Re: Heater hoses - Kaveman 13:25:29 09/13/01 (1)
      • That's correct... - Mr. Coffey 18:28:27 09/13/01 (0)
  • How about these wheels... - Matt Evans 13:09:04 09/13/01 (1)
    • Getting closer... - Eric 13:30:23 09/13/01 (0)
  • Will these wheels fit ? - Matt 13:04:08 09/13/01 (2)
    • Re: Will these wheels fit ? - Troy Rudolph 15:21:36 09/13/01 (0)
    • Re: Will these wheels fit ? - TCD 13:10:57 09/13/01 (0)
  • somthing cool on Ebay no affiliation yad yad yad - Sam Schultz 12:12:12 09/13/01 (0)
  • The Mystery Continues..(for those following....) - Kaveman 11:40:49 09/13/01 (8)
    • Re: Cold Start Valve? - Walt Barie 15:02:41 09/14/01 (0)
    • Fuel Pump relay? - Collins 09:57:07 09/14/01 (1)
      • Re: Fuel Pump relay? - Kaveman 10:59:26 09/14/01 (0)
    • Re: The Mystery Continues..(for those following....) - Peter Florance 19:04:31 09/13/01 (4)
      • Stoich Values.... Peter F..... - Kaveman 11:03:40 09/14/01 (3)
        • Re: Stoich Values.... Peter F..... - Peter Florance 11:57:57 09/14/01 (2)
          • Re: Stoich Values.... Peter F..... - Kaveman 12:19:44 09/14/01 (1)
            • Re: Stoich Values.... Peter F..... - Peter Florance 15:40:49 09/14/01 (0)
  • Rec'd parts from Maximillian Importing - Sam R. 11:34:35 09/13/01 (0)
  • Good response from BMW dealer - Mark 08:47:27 09/13/01 (0)
  • ???Where can I buy Euro Bumpers??? - Matt Evans 04:24:38 09/13/01 (1)
    • Re: ???Where can I buy Euro Bumpers??? - Greg 06:53:41 09/13/01 (0)
  • Does M535i front spoiler replace U.S. Bumper? - Matt Evans 04:23:00 09/13/01 (3)
    • Re: Does M535i front spoiler replace U.S. Bumper? - Eddie 16:49:15 09/13/01 (0)
    • Re: Does M535i front spoiler replace U.S. Bumper? - Sam R. 11:53:56 09/13/01 (0)
    • Re: Does M535i front spoiler replace U.S. Bumper? - stewart 06:24:42 09/13/01 (0)
  • Need M535i Front Spoiler Part Number!!!!!!!! - Matt Evans 04:20:05 09/13/01 (0)
  • 520 not so economic... - Kaj Mäkelä 02:12:47 09/13/01 (1)
    • Re: 520 not so economic... - Mark 08:32:36 09/13/01 (0)
  • '80 528i mystery miss - Dale Beuning 23:12:59 09/12/01 (2)
    • Re: '80 528i mystery miss - DScott 15:31:46 09/14/01 (0)
    • Re: '80 528i mystery miss - Peter Florance 09:11:55 09/13/01 (0)
  • Prelimanary Estimate from La Jolla $1270.00 LABOR - Donna 23:03:09 09/12/01 (6)
    • Re: Prelimanary Estimate from La Jolla $1270.00 LABOR - Todd Mayfield 10:23:22 09/25/01 (0)
    • Re: Prelimanary Estimate from La Jolla $1270.00 LABOR - Michael Longeneker 19:59:26 09/15/01 (0)
    • Re: Prelimanary Estimate from La Jolla $1270.00 LABOR - Greg 06:59:30 09/13/01 (0)
    • Very tough call.... How does the 535 fellow sound. - Lars PNW 81_528i 00:56:30 09/13/01 (2)
      • PS.... Good solid used engines pop up all the - Lars PNW 81_528i 00:59:44 09/13/01 (1)
        • Re: PS.... Good solid used engines pop up all the - stewart 06:02:43 09/13/01 (0)
  • 2.8 to 3.3 (not really that long....) - Dave Spencer 19:57:33 09/12/01 (0)
  • thermostat... maybe - justin 18:35:01 09/12/01 (6)
    • Possibly re-core radiator.... - Lars PNW 81_528i 22:42:39 09/12/01 (0)
    • Re: thermostat... maybe - Greig Latham 20:18:16 09/12/01 (0)
    • Re: thermostat... maybe - Peter Florance 20:04:47 09/12/01 (0)
    • Re: thermostat... maybe - Dave Spencer 20:01:21 09/12/01 (0)
    • 30 year old E-12, Overheat? Nah.... - Bill Bowes 19:56:38 09/12/01 (1)
      • Re: 30 year old E-12, Overheat? Nah.... - justin 22:43:21 09/12/01 (0)
  • Advice needed on my beloved E12 - Jerry Sugay 18:13:58 09/12/01 (1)
    • Re: Advice needed on my beloved E12 - Kaveman 18:27:49 09/12/01 (0)
  • Voltage Regulator - DScott 17:05:57 09/12/01 (1)
    • Re: Voltage Regulator - Sam Schultz 17:23:16 09/12/01 (0)
  • Calling Bill Barrett - David 16:38:08 09/12/01 (1)
    • Re: Calling Bill Barrett - Bill Barrett 14:43:19 09/13/01 (0)
  • Yesterday - T. Han 12:48:34 09/12/01 (0)
  • What's a M535i rear spoiler worth? - Jim Davis 10:47:03 09/12/01 (5)
    • Re: What's a M535i rear spoiler worth? - Frank H 14:56:50 09/12/01 (4)
      • Makes sense to me... - Eric 13:35:36 09/13/01 (0)
      • Re: What's a M535i rear spoiler worth? - Jim Davis 16:32:46 09/12/01 (2)
        • The guy from Bimmer.org? eom - Trubey 23:48:56 09/12/01 (1)
          • Yep. (eom) - Jim Davis 09:58:03 09/13/01 (0)
  • After 21 days @ La Jolla Independent!! - Donna 00:12:36 09/12/01 (23)
    • Get your car back!!! - Ryan Bryan 17:12:04 09/12/01 (0)
    • moral support - DScott 15:57:03 09/12/01 (0)
    • Re: Marco Polo BMW - Troy Rudolph 12:41:53 09/12/01 (0)
    • Try Barrons off Miramar Road, they know E12s - Collins 11:04:53 09/12/01 (2)
      • Re: Try Barrons off Miramar Road, they know E12s - Donna 11:27:28 09/12/01 (0)
      • Re: Try Barrons off Miramar Road, they know E12s - Collins 11:14:21 09/12/01 (0)
    • Link on the $300 e12 - Lars PNW 81_528i 08:22:38 09/12/01 (1)
      • Re: Link on the $300 e12 - Donna 11:31:43 09/12/01 (0)
    • Donna... I apologize. - Lars PNW 81_528i 08:18:49 09/12/01 (0)
    • The real reason they are in business... - Lars PNW 81_528i 08:09:20 09/12/01 (8)
      • agreed but - Peter Florance 08:19:31 09/12/01 (7)
        • Thanks Peter..... No intent to by cynical - Lars PNW 81_528i 09:30:23 09/12/01 (3)
          • I think you're right about moving it - Peter Florance 09:47:31 09/12/01 (2)
            • Re: I think you're right about moving it - Donna 11:43:48 09/12/01 (1)
              • Re: I think you're right about moving it - Peter Florance 11:52:21 09/12/01 (0)
        • Re: agreed but - Randy McCafferty 09:18:32 09/12/01 (0)
        • Re: agreed but - Randy McCafferty 09:13:40 09/12/01 (1)
          • Re: agreed but - Peter Florance 09:53:54 09/12/01 (0)
    • radiator bottle - scottie 02:18:56 09/12/01 (4)
      • 69.95 from Bavarian Autosport - Peter Florance 07:00:53 09/12/01 (3)
        • I mean "shouldn't cost more...." (nt) - Peter Florance 07:01:50 09/12/01 (2)
          • Re: I mean "shouldn't cost more...." (nt) - Sam Schultz 08:34:45 09/12/01 (1)
            • Re: I mean "shouldn't cost more...." (nt) - Donna 11:55:56 09/12/01 (0)
  • e12 for sale...cheap - Ryan Bryan 17:35:51 09/11/01 (1)
    • Re: e12 for sale...cheap - Donna 00:00:14 09/12/01 (0)
  • No E12 content - DScott 16:22:47 09/11/01 (2)
    • Re: No E12 content - Kaveman 16:35:12 09/11/01 (1)
      • Re: No E12 content - Mark 18:55:54 09/11/01 (0)
  • 79 528i failure to start - Jim Ockner 11:37:10 09/11/01 (7)
    • Re: 79 528i failure to start - Peter Florance 12:34:52 09/11/01 (6)
      • Re: 79 528i failure to start - Jim Ockner 01:32:14 09/12/01 (3)
        • Re: 79 528i failure to start - Peter Florance 07:13:16 09/12/01 (2)
          • Shocking - Jim Ockner 10:34:03 09/12/01 (1)
            • Let us know the outcome - Peter Florance 11:02:58 09/12/01 (0)
      • Re: 79 528i failure to start - Jim Ockner 14:22:18 09/11/01 (1)
        • Re: 79 528i failure to start - Peter Florance 14:28:31 09/11/01 (0)
  • God Bless America!!!! - Bob 11:17:54 09/11/01 (8)
    • Agreed. - Peter Florance 12:35:53 09/11/01 (7)
      • _ - Sam Schultz 16:58:28 09/11/01 (0)
      • I hope so, my wife flew to NYC this morning - Randy M 13:19:11 09/11/01 (5)
        • Heard from wife... - Randy McCafferty 15:26:15 09/11/01 (2)
          • Thank God. Sigh of relief! - Greg 15:34:06 09/11/01 (1)
            • Re: Thank God. Sigh of relief! - Donna 23:57:41 09/11/01 (0)
        • Please let us know when you hear from her - Peter Florance 14:30:24 09/11/01 (0)
        • our prayers go out to your family and her safety.. - scottie 14:17:03 09/11/01 (0)
  • Son of 2.8 to 3.3 - D. Spencer 07:28:24 09/11/01 (0)
  • Laguna Seca... - Mr. Coffey 23:40:13 09/10/01 (3)
    • Try it again. - Mr. Coffey 23:43:26 09/10/01 (2)
      • Re: Try it again. - Kaveman 16:36:53 09/11/01 (0)
      • may not work but here goes - Peter Florance 06:12:20 09/11/01 (0)
  • WTB: 21 spoke stock alloys (1 or 2 needed) - Greg 21:28:34 09/10/01 (1)
    • Re: WTB: 21 spoke stock alloys (1 or 2 needed) - Chuck Denson 22:06:03 09/10/01 (0)
  • Coolant temp sensor / Aux fan switch - Martyn Smith 20:58:47 09/10/01 (2)
    • Reason for my asking is.... - Martyn Smith 21:01:58 09/10/01 (1)
      • Re: Reason for my asking is.... - Peter Florance 21:13:34 09/10/01 (0)
  • Wanted 320i intake runners - Bill Barrett 20:29:58 09/10/01 (0)
  • Any 528i owners near Elkhart, Indiana? - Peter Florance 20:23:23 09/10/01 (1)
    • or someone with spare ignition module to sell? - Peter Florance 08:03:42 09/11/01 (0)
  • I need springs...What kind??? - Ryan Bryan 19:59:54 09/10/01 (1)
    • Re: I need springs...What kind??? - Troy Rudolph 08:11:07 09/11/01 (0)
  • saw an e12! (that wasn't mine) - Chuck Denson 18:11:23 09/10/01 (6)
    • e12's non don't even exist in Pgh - Randy McCafferty 08:12:43 09/11/01 (1)
      • Re: e12's non don't even exist in Pgh (yes they do - Walt Barie 12:49:38 09/12/01 (0)
    • Yes it's a strange cult. - Carlie Bentley 06:42:18 09/11/01 (0)
    • Re: saw 4-->

Posting Links and Pictures - Troy Rudolph (Webmaster) 20:32:49 09/05/01 (1)

• Great! - Peter Florance 20:50:42 09/05/01 (0)

were is the new car of the month? eom - David 20:29:41 09/05/01 (1)

• Re: were is the new car of the month? eom - Troy Rudolph (Webmaster) 21:02:00 09/05/01 (0)

Test Message - Troy Rudolph (Webmaster) 20:23:56 09/05/01 (0)

Wandering Idle, pulling out hair!!! Plea for Help. - Carlie Bentley 20:22:50 09/05/01 (6)

• Re: Wandering Idle, pulling out hair!!! Plea for Help. - Matt B 22:18:55 09/05/01 (0)
• distributor? - Peter Florance 21:00:43 09/05/01 (2)
  • Hmmm distributor? - Carlie Bentley 21:14:34 09/05/01 (1)
    • maybe this is your problem - Peter Florance 22:02:35 09/05/01 (0)
• I had the same problem - MarcMc 20:37:38 09/05/01 (1)
  • Thanks that may be next. - Carlie Bentley 20:40:55 09/05/01 (0)

Wiper gasket? - SwampJedi 19:52:34 09/05/01 (2)

• Re: Wiper gasket? - Randy McCafferty 08:16:43 09/06/01 (0)
• Garden Hose washers --eom - Trubey 20:08:30 09/05/01 (0)

s.f. bay area e12 fans - mark 19:18:37 09/05/01 (6)

• SFers - Dean 11:56:10 09/06/01 (1)
  • Re: SFers e28 carpet in your e12 - mark 18:10:05 09/06/01 (0)
• Say....'82 M535i? - Eric Again 19:57:46 09/05/01 (1)
  • Re: Say....'82 M535i? that would be correct - mark 22:18:53 09/05/01 (0)
• Ironically... - Eric 19:52:01 09/05/01 (0)
• Re: s.f. bay area e12 fans - Mark 19:51:26 09/05/01 (0)

Paging Karl "Mr Autocross" Koenig - Peter Florance 19:00:07 09/05/01 (1)

• Re: Paging Karl "Mr Autocross" Koenig - Karl 16:52:02 09/06/01 (0)

Im screwed...(not e12 related...a little?) (long) - RB 18:36:13 09/05/01 (4)

• Sorry to hear about your loss....>>> - Lars PNW 81_528i 20:52:07 09/05/01 (0)
• they were for my e12...(eom) - RB 18:37:46 09/05/01 (2)
  • Re: they were for my e12...(eom) - trubey 19:25:29 09/05/01 (1)
    • Re: they were for my e12...(eom) - RB 20:27:14 09/05/01 (0)

Gage Panel - Karl 17:55:43 09/05/01 (2)

• Re: Gage Panel - Bob Iverach 10:29:00 09/06/01 (0)
• Re: Gage Panel - Karl 17:59:59 09/05/01 (0)

At Last! M5 Pics are here...I hope... - Scott Hodge 16:45:22 09/05/01 (1)

• Re: At Last! M5 Pics are here...I hope... - Scott 17:06:12 09/05/01 (0)

Looking for Passenger-Side Front Brake Vent/Duct - Mishast 15:29:02 09/05/01 (0)

Possible Solution to "Cold" Stumble.... - Kaveman 11:25:01 09/05/01 (0)

Hey who's got an AC compensation valve bracket... - Peter Florance 07:51:25 09/05/01 (4)

• Hey, I thought you cleaned out that garage ;-) - Jim Davis 12:28:20 09/05/01 (1)
  • that's what chapped me so bad..... - Peter Florance 12:43:47 09/05/01 (0)
• Re: Hey who's got an AC compensation valve bracket... - Troy Rudolph 08:09:42 09/05/01 (1)
  • Re: Hey who's got an AC compensation valve bracket... - Peter Florance 08:26:50 09/05/01 (0)

Update from La Jolla Independent's Carl Nelson!!! - Donna 00:55:06 09/05/01 (12)

• Re: Update from La Jolla Independent's Carl Nelson!!! - Michael Longeneker 09:22:13 09/06/01 (1)
  • Re: Update from La Jolla Independent's Carl Nelson!!! - Donna 21:26:26 09/06/01 (0)
• After 5 e12's and one 528e.... - Lars PNW 81_528i 13:47:31 09/05/01 (0)
• Re: Update from La Jolla Independent's Carl Nelson!!! - Chuck Denson 13:18:12 09/05/01 (0)
• Re: Update from La Jolla Independent's Carl Nelson!!! - Frank H 09:24:01 09/05/01 (4)
  • Agree w/Frank completely! - Eric 11:47:52 09/05/01 (2)
    • I really haven't had the opportunity - Donna 12:59:54 09/05/01 (1)
      • Re: I really haven't had the opportunity - Wietse 19:45:43 09/05/01 (0)
  • Re: Update from La Jolla Independent's Carl Nelson!!! - Donna 09:58:27 09/05/01 (0)
• Re: Update from La Jolla Independent's Carl Nelson!!! - mikey 04:19:03 09/05/01 (2)
  • Re: Update from La Jolla Independent's Carl Nelson!!! - Donna 10:08:07 09/05/01 (1)
    • Re: Update from La Jolla Independent's Carl Nelson!!! - Harold 21:02:30 09/05/01 (0)

e12 addiction - Jeremy T 21:23:10 09/04/01 (8)

• Re: e12 addiction - Carlie Bentley 20:36:58 09/05/01 (0)
• Re: e12 addiction - Sam Schutlz 19:14:55 09/05/01 (0)
• Re: e12 addiction - Roberto Urbano 23:00:59 09/04/01 (5)
  • Re: e12 addiction - Scott 09:37:16 09/05/01 (4)
    • Re: e12 addiction - Roberto Urbano 14:39:52 09/05/01 (0)
    • Any one of a number of girl friends!!! - Lars PNW 81_528i 13:53:57 09/05/01 (0)
    • Re: e12 addiction - Peter Florance 10:21:01 09/05/01 (1)
      • Re: e12 addiction - Mark 12:00:36 09/05/01 (0)

What is the typical diff ratio for a '79 528i auto - TCD 21:02:20 09/04/01 (2)

• Paging the Rev X Shoot me your email please.. - J Betts 22:00:46 09/04/01 (0)
• Re: What is the typical diff ratio for a '79 528i auto - rev. brendan x 21:16:03 09/04/01 (0)

Steering Problem!!!!! - David 20:50:35 09/04/01 (3)

• Thanks! you guys were right (eom) - David 19:31:10 09/05/01 (0)
• Re: Steering Problem!!!!! - Karl 18:11:17 09/05/01 (0)
• Re: Steering Problem!!!!! - Sam Schultz 20:54:09 09/04/01 (0)

Hey Peter Florance - osborne911 20:47:03 09/04/01 (1)

• Re: Hey Peter Florance - Peter Florance 22:00:58 09/04/01 (0)

pics of Real/Fake m535 up tomorrow - Scott 19:21:45 09/04/01 (4)

• I believe that is the Counter for the O2 light. - Jeff C 08:00:46 09/05/01 (3)
  • Hey - wait a minute; red flag. - Jim Davis 12:16:04 09/05/01 (2)
    • Re: Hey - wait a minute; red flag.(long) - Scott 14:44:06 09/05/01 (1)
      • Re: Hey - wait a minute; red flag.(long) - Jim Davis 16:17:48 09/05/01 (0)

Turning is laborious when car is cold - Dean 18:59:09 09/04/01 (1)

• I'm guessing glazed or loose belt... - Peter Florance 22:02:41 09/04/01 (0)

Whistling AFM! Any ideas for cure? - Tim R 18:26:06 09/04/01 (3)

• Re: Whistling AFM! Any ideas for cure? - Troy Rudolph 08:21:01 09/05/01 (0)
• Re: Whistling AFM! Any ideas for cure? - Kaveman 19:13:02 09/04/01 (1)
  • My K&N whistles too... Stock box did not (nt) - J Betts 20:24:53 09/04/01 (0)

"Tour Around the Mountain" - Gary Burke 15:46:29 09/04/01 (0)

Zender side skirts on E-bay - Greg 14:03:55 09/04/01 (0)

Better flow exhaust sys. for '76 530i? - kris 13:39:10 09/04/01 (8)

• More Flow = More Loud = Louder radio = etc. - Carlie Bentley 20:52:57 09/05/01 (0)
• Free Exhaust in Langley, British Columbia - Chris 21:46:57 09/04/01 (0)
• Re: Better flow exhaust sys. for '76 530i? - Don Daynes 19:43:18 09/04/01 (0)
• Re: Better flow exhaust sys. for '76 530i? - Peter Maag 17:29:27 09/04/01 (0)
• Re: Better flow exhaust sys. for '76 530i? - Roberto Urbano 13:59:41 09/04/01 (3)
  • Re: Better flow exhaust sys. for '76 530i? - Troy Rudolph 15:13:27 09/04/01 (0)
  • It's unbelievable heavy - Peter Florance 14:21:33 09/04/01 (1)
    • Re: It's unbelievable heavy - Sam Schultz 19:00:30 09/04/01 (0)

final gauge pictures - FLIP 13:24:20 09/04/01 (3)

• final gauge pictures - Tina Gillette 16:50:10 09/05/01 (1)
  • SPAM SLAMMER, are you out there? - FLIP 19:13:53 09/03/01 (0)
  • Mahle Pistons 3.5 liter late M30 on Ebay - Greg 17:27:40 09/03/01 (0)
  • euro fenders FS... - Ryan Bryan 13:43:16 09/03/01 (2)
    • What "other" board? - Bill Bowes 15:36:39 09/03/01 (1)
      • they are german aftermarket - Sam Schultz 17:37:12 09/03/01 (0)
  • Another 209hp M30 "Big Six" on eBay - Troy Rudolph 12:02:29 09/03/01 (0)
  • 209hp M30 "Big Six" on eBay - Troy Rudolph 11:49:01 09/03/01 (4)
    • Hey Troy... - Mr. Coffey 21:29:09 09/03/01 (3)
      • Re: Hey Troy... - Troy Rudolph 23:03:34 09/03/01 (1)
        • Thanks! nt - Mr. Coffey 11:29:04 09/04/01 (0)
      • Engine Swap.... - Kaveman 22:15:26 09/03/01 (0)
  • 209hp M30 "Big Six" on eBay - Troy Rudolph 11:48:46 09/03/01 (0)
  • Condenser & Points???? - Big ED 07:57:43 09/03/01 (9)
    • Re: Condenser & Points???? - Troy Rudolph 11:10:48 09/03/01 (1)
      • Re: Condenser & Points???? - Troy Rudolph 12:19:26 09/03/01 (0)
    • Re: Condenser & Points???? - Bill Bowes 08:40:46 09/03/01 (2)
      • 530i don't have resistors from what I can tell - Peter Florance 08:46:45 09/03/01 (1)
        • Re: 530i don't have resistors from what I can tell - Bill Bowes 15:44:09 09/03/01 (0)
    • wrong coil? - Peter Florance 08:37:26 09/03/01 (3)
      • Re: wrong coil? - Big ED 21:01:17 09/03/01 (1)
        • please post the results - Peter Florance 07:10:25 09/04/01 (0)
      • Re: wrong coil? - Frank H 11:34:32 09/03/01 (0)
  • Today's projects - Peter Florance 07:35:03 09/03/01 (6)
    • Re: Today's projects - Matt B 18:31:01 09/04/01 (0)
    • Re: Today's projects - Jeremy T 22:17:12 09/03/01 (0)
    • Re: Today's projects - D. Spencer 16:55:57 09/03/01 (1)
      • Re: Today's projects - Kaveman 18:25:43 09/03/01 (0)
    • Re: Today's projects - Kaveman 12:09:34 09/03/01 (0)
    • Honey do's done. Off to the boneyard! - Tim R 80 633 07:44:47 09/03/01 (0)
  • well well, look what I did now..... - Roberto Urbano 02:10:36 09/03/01 (3)
    • Re: well well, look what I did now..... - Mark 04:17:56 09/03/01 (0)
    • I forgot to mention... - Roberto Urbano 04:15:07 09/03/01 (1)
      • Re: I forgot to mention... - Mark 05:07:44 09/03/01 (0)
  • Flywheel bolts sealing - Mike V. 00:30:54 09/03/01 (1)
    • Re: Flywheel bolts sealing - Robert Bondi 04:56:23 09/03/01 (0)
  • First 400 miles on '80 528i - Eric 23:53:35 09/02/01 (1)
    • Re: First 400 miles on '80 528i - Will Woodford 18:59:54 09/04/01 (0)
  • Sponsor Page Added - Peter Florance 21:53:39 09/02/01 (0)
  • Tint removal - Jeremy T 20:57:44 09/02/01 (6)
    • Re: Tint removal - Bill Bowes 08:44:54 09/03/01 (0)
    • Re: Tint removal - Canadian Bimmer 07:48:11 09/03/01 (0)
    • Re: Tint removal - Eric 23:32:38 09/02/01 (0)
    • Re: Tint removal - Carlie Bentley 22:48:33 09/02/01 (2)
      • Re: Tint removal - Jeremy T 00:07:17 09/03/01 (1)
        • Re: Tint removal - Carlie Bentley 08:29:31 09/03/01 (0)
  • Cracked dash - T. Han 20:18:46 09/02/01 (0)
  • Do I need an adjustable fuel pressure regulator? - Leo 13:46:20 09/02/01 (1)
    • Re: Do I need an adjustable fuel pressure regulator? - Peter Florance 19:26:40 09/02/01 (0)
  • Dash Removal--How?? - Chris 11:22:43 09/02/01 (5)
    • you've got it - greghill 11:44:13 09/03/01 (0)
    • Re: Dash Removal--How?? - Bob Iverach 23:04:09 09/02/01 (0)
    • Re: Dash Removal--How?? - Bob Iverach 23:02:33 09/02/01 (0)
    • No such thing as indestructible in wrong hands. - Lars PNW 81_528i 11:35:55 09/02/01 (1)
      • Fender Sealing - Chris 13:14:24 09/02/01 (0)
  • Air Flow Meter Adjustment FAQ? - Carlie Bentley 11:10:20 09/02/01 (0)
  • Eric's New 528i - Kaveman 21:20:18 09/01/01 (6)
    • Learned something already... - Eric 00:06:53 09/02/01 (5)
      • Re: Learned something already... - Troy Rudolph 11:41:29 09/02/01 (0)
      • Re: Learned something already... - Karl 10:18:02 09/02/01 (1)
        • Agree... - Eric 00:00:29 09/03/01 (0)
      • Re: Learned something already... - Peter Florance 08:20:03 09/02/01 (1)
        • Re: Learned something already... - Eric 23:38:59 09/02/01 (0)
  • Factory Manual on Ebay - Jim Hineline 20:48:53 09/01/01 (1)
    • Try Again - Jim Hineline 20:51:22 09/01/01 (0)
  • afm values - owen snow 16:54:46 09/01/01 (1)
    • Re: afm values - Peter Florance 17:37:27 09/01/01 (0)
  • Thanks and question for donors - Peter Florance 07:20:40 09/01/01 (1)
    • oops - Peter Florance 10:28:45 09/01/01 (0)
  • test - billy isbell 01:25:58 09/01/01 (0)
  • bosch platinum? - billy isbell 18:40:57 08/31/01 (2)
    • Re: bosch platinum? - Jim Davis 19:19:11 08/31/01 (1)
      • Re: bosch platinum? - billy isbell 20:32:34 08/31/01 (0)
  • Fixed the gas leak - Martyn Smith 17:52:06 08/31/01 (1)
    • Re: Fixed the gas leak - Karl 10:23:21 09/02/01 (0)
  • who else here remembers funny fridays? - scottie 17:02:58 08/31/01 (0)
  • let's try this one more time...FS shortblock - Roberto Urbano 16:16:40 08/31/01 (3)
    • thats a good deal... - scottie 16:54:48 08/31/01 (2)
      • Re: thats a good deal... - Roberto Urbano 01:54:23 09/01/01 (1)
        • No longer for sale. - Roberto Urbano 01:09:12 09/03/01 (0)
  • If you want to contribute to the web site... - Peter Florance 16:08:36 08/31/01 (1)
    • oh yeah my Paypal account name - Peter Florance 16:10:34 08/31/01 (0)
  • proper lugnut torque? - FLIP 15:40:05 08/31/01 (3)
    • Re: proper lugnut torque? - Eric 00:03:11 09/01/01 (0)
    • Re: proper lugnut torque? - Robert Bondi 21:02:05 08/31/01 (0)
    • Re: proper lugnut torque? - T. Han 16:48:19 08/31/01 (0)
  • Rear seat cushions-source - john 13:43:15 08/31/01 (3)
    • Re: Rear seat cushions-source - Troy Rudolph 14:22:50 08/31/01 (2)
      • Re: Rear seat cushions-source - Harold 23:07:33 08/31/01 (1)
        • Re: Rear seat cushions-source - Peter Florance 06:42:16 09/01/01 (0)
  • Beamer Bob ! Are you still out there ? - Peter Claassen 12:38:25 08/31/01 (1)
    • Yes I am here! - Beamher Bob 09:56:40 09/02/01 (0)
  • Leadership Announcement!!! - Gregory Szczyrbak (Founder, Former Dictator) 11:09:16 08/31/01 (10)
    • Lost SHEEP, almost with out a sheppard! - Sam R. (the other SAM) 12:03:45 09/01/01 (4)
      • Lost SHEEP, almost with out a sheppard! part 2 - Sam R. (the other 1/2 asleep SAM) 12:20:04 09/01/01 (3)
        • Re: Lost SHEEP, almost with out a sheppard! part 2 - Jim Davis 13:27:14 09/01/01 (2)
          • Re: Lost SHEEP, almost with out a sheppard! part 2 - Sam R. 16:05:21 09/01/01 (1)
            • There ya go. Now you have it. ;-) - Jim Davis 22:53:44 09/01/01 (0)
    • Can we have a plaque for Greg somewhere? - Eric 15:47:24 08/31/01 (0)
    • Re: Leadership Announcement!!! - Jim Davis 13:46:20 08/31/01 (0)
    • Thanks Greg! - Peter Florance 13:26:33 08/31/01 (0)
    • Re: Leadership Announcement!!! - Randy McCafferty 12:46:04 08/31/01 (0)
    • Re: Leadership Announcement!!! - Bernie Aguilarq 12:38:48 08/31/01 (0)
  • Stumble notes for all affected - Peter Florance 05:52:10 08/31/01 (2)
    • Re: Stumble notes for all affected - Jim Davis 09:43:36 08/31/01 (1)
      • Re: Stumble notes for all affected - Peter Florance 12:07:10 08/31/01 (0)
  • hotmail hacking--hack into all accounts!!!!!!!!!!!!!!!!!!!! - hackerman 04:52:29 08/31/01 (1)
    • complaint logged with hotmail - spam slammer 05:18:32 08/31/01 (0)
  • It's been quite awhile (long) - scottie 00:34:20 08/31/01 (6)
    • McGehee! - Eric 15:54:51 08/31/01 (4)
      • Re: McGehee! CUSHY!! - scottie 16:38:27 08/31/01 (3)
        • Re: McGehee! CUSHY!! - Eric 16:44:41 08/31/01 (2)
          • Re: oh yah! my dog will beat up your dog :)= - scottie 16:58:17 08/31/01 (1)
            • Re: oh yah! my dog will beat up your dog :)= - Eric 17:23:56 08/31/01 (0)
    • I'll take them off your hands! Check your email. - J Betts 08:24:13 08/31/01 (0)
  • buying 78 530i - Geo 20:38:03 08/30/01 (8)
    • Re: buying 78 530i - Randy McCafferty 07:50:16 08/31/01 (0)
    • Is this car in Nevada City, CA? - Eric 23:55:33 08/30/01 (0)
    • Re: buying 78 530i - Carlie Bentley 20:53:35 08/30/01 (5)
      • Re: buying 78 530i - Randy M 08:01:47 08/31/01 (0)
      • Re: buying 78 530i - Geo 22:09:26 08/30/01 (3)
        • Re: buying 78 530i - Jim Davis 23:40:07 08/30/01 (1)
          • Re: buying 78 530i - Harold 23:32:21 08/31/01 (0)
        • Re: buying 78 530i - Jim Davis 23:27:30 08/30/01 (0)
  • Bounty on hinge designers head. (Long Wrap up) - Carlie Bentley 20:37:58 08/30/01 (3)
    • Re: Bounty on hinge designers head. (Long Wrap up) - D. Spencer 22:34:25 08/30/01 (0)
    • Re: Bounty on hinge designers head. (Long Wrap up) - Kaveman 22:21:18 08/30/01 (1)
      • Nope No O2 sensor. - Carlie Bentley 15:26:08 08/31/01 (0)
  • Trouble!! please help - Martyn Smith 19:35:20 08/30/01 (5)
    • Re: Trouble!! please help - Chuck Denson 21:07:47 08/30/01 (4)
      • Re: Trouble!! please help - Martyn Smith 21:39:20 08/30/01 (3)
        • Re: Trouble!! please help - Peter Florance 05:29:06 08/31/01 (2)
          • Re: Trouble!! please help - Martyn Smith 07:35:01 08/31/01 (1)
            • Any 530 owners out there? - Peter Florance 08:45:46 08/31/01 (0)
  • My E12 Update! Carl @ La Jolla Independent says... - Rockin' Donna 15:14:42 08/30/01 (26)
    • Re: My E12 Update! Carl @ La Jolla Independent says... - mikey 07:31:07 08/31/01 (1)
      • Re: My E12 Update! Carl @ La Jolla Independent says... - Donna 00:17:14 09/02/01 (0)
    • Re: $50 car update - Bill Bowes 18:32:47 08/30/01 (2)
      • that's the beauty of them - Peter Florance 05:26:24 08/31/01 (0)
      • Re: $50 car update - Frank H 20:09:03 08/30/01 (0)
    • did you ever install a thermostat - Peter Florance 18:15:23 08/30/01 (1)
      • Re: did you ever install a thermostat (OverHeating) - Randy Clark 13:37:01 09/03/01 (0)
    • Re: My E12 Update! Carl @ La Jolla Independent says... - Eric 17:13:32 08/30/01 (0)
    • Re: My E12 Update! Carl @ La Jolla Independent says... - Don Daynes 16:33:41 08/30/01 (1)
      • laugh, nice Don (more) - FLIP 10:30:13 08/31/01 (0)
    • Re: My E12 Update! Carl @ La Jolla Independent says... - Kaveman 16:27:10 08/30/01 (0)
    • eta engine better than an "i" engine? On crack? - FLIP 15:45:05 08/30/01 (14)
      • Siding with Mikey on this one. - Lar PNW 81_528i 23:45:22 08/30/01 (12)
        • Re: Siding with Mikey on this one. - Frank H 01:24:22 08/31/01 (11)
          • Re: Siding with Mikey on this one. - mikey 07:07:49 08/31/01 (10)
            • Re: Siding with Mikey on this one. - billy isbell 13:51:09 08/31/01 (0)
            • not a snap judgement, engineering judgement - FLIP 10:28:04 08/31/01 (7)
              • Re: not a snap judgement, engineering judgement - mikey 17:17:33 08/31/01 (6)
                • alright....DUDE... - FLIP 11:18:42 09/04/01 (0)
                • Re: not a snap judgement, engineering judgement - mikey 17:22:58 08/31/01 (4)
                  • Re: not a snap judgement, engineering judgement - Mark 19:49:30 08/31/01 (3)
                    • Re: not a snap judgement, engineering judgement - mikey 22:55:06 08/31/01 (2)
                      • Re: not a snap judgement, engineering judgement - Mark 02:41:21 09/01/01 (1)
                        • I agree - Jim Hineline 14:18:26 09/01/01 (0)
            • I've driven both - Peter Florance 08:48:56 08/31/01 (0)
      • Re: eta engine better than an "i" engine? On crack? - mikey 18:42:08 08/30/01 (0)
  • Another e12 in my future - Jeremy T 13:05:07 08/30/01 (3)
    • Re: Another e12 in my future - Jeremy T 16:25:13 08/30/01 (1)
      • Re: Another e12 in my future - Bob Iverach 18:16:34 08/30/01 (0)
    • Re: Another e12 in my future - Chuck Denson 13:16:01 08/30/01 (0)
  • Euro Bumpers for E12 Available soon....... - DW Simmons 12:34:23 08/30/01 (1)
    • Re: Euro Bumpers for E12 Available soon....... - DW Simmons 12:40:54 08/30/01 (0)
  • Spark Plugs: Interesting... - Martyn Smith 12:27:58 08/30/01 (0)
  • Recommend Tranny Oils - Mishast 12:12:38 08/30/01 (8)
    • Re: Recommend Tranny Oils - Martyn SMith 12:29:45 08/30/01 (0)
    • Re: Recommend Tranny Oils - Troy Rudolph 12:24:20 08/30/01 (6)
      • Re: Recommend Tranny Oils - Lenny D. 15:59:11 08/30/01 (5)
        • Re: Recommend Tranny Oils - Bob Iverach 18:14:06 08/30/01 (4)
          • Re: Recommended Tranny Oils - Lenny D. 01:59:11 08/31/01 (3)
            • ...what am I doing wrong? - Lenny D. 02:02:39 08/31/01 (2)
              • Re: ...what am I doing wrong? - Greg 12:06:48 08/31/01 (