Please visit our home page for FAQs and other information.
First Fives Bulletin Board Archive XIV
(2001/11/12 - 2001/12/14)
This board is inactive. It is for archival purposes only. Please visit the active board at
FirstFives.org.
[
First Fives Home
] [
Board Archives
]
E12 #3
-
mikey
19:13:18 12/14/01
(1)
You Go Boy!!! nt
-
Scott
21:39:13 12/14/01
(0)
wtb nice 528i in so-cal
-
ken
15:44:36 12/14/01
(0)
Reactor's
-
Derek
14:53:28 12/14/01
(4)
I don't know if this is true for e12 reactors...
-
Peter Florance
21:29:32 12/14/01
(0)
Re: Reactor's
-
Randy McCafferty
21:24:16 12/14/01
(0)
Re: Reactor's
-
Farokh
17:22:52 12/14/01
(1)
Re: Reactor's
-
Nathan
19:04:21 12/14/01
(0)
79 528i headers
-
Nathan
14:10:28 12/14/01
(0)
Premium Fuel?
-
Nathan
14:08:01 12/14/01
(1)
Re: Premium Fuel?
-
T. Han
14:39:43 12/14/01
(0)
Front bumper still needed
-
David Simmons
11:52:38 12/14/01
(0)
dammit, hood latch cable broke
-
Adam Wilson
10:34:45 12/14/01
(1)
Re: dammit, hood latch cable broke
-
T. Han
14:49:37 12/14/01
(0)
an idea for someone with time and $$
-
Greg
08:27:33 12/14/01
(7)
Another screamer....
-
Lars PNW 81_528i
09:43:07 12/14/01
(6)
Lars, Are you reffering to the 22R??
-
Scott
13:15:50 12/14/01
(5)
Yeah, that's the one...The first time I put the...
-
Lars PNW 81_528i
13:50:13 12/14/01
(4)
NO NO NO, my mistake .. it's the 4aGe engine
-
Lars PNW 81_528i
15:27:42 12/14/01
(0)
Re: Yeah, that's the one...The first time I put th
-
Frank H
15:04:16 12/14/01
(1)
7 was a blast!
-
Peter Florance
16:09:08 12/14/01
(0)
I'm interested now, what Toyotas did this engine
-
Martyn Smith
13:59:18 12/14/01
(0)
Anyone retro fit E28 rear subframe in an E12?
-
Mike
07:02:49 12/14/01
(1)
Re: Anyone retro fit E28 rear subframe in an E12?
-
TCD
08:09:55 12/14/01
(0)
E12 in Folsom, CA?
-
Sam R.
19:11:40 12/13/01
(4)
Re: E12 in Folsom, CA?
-
Just bought 84 e28
23:29:35 12/13/01
(0)
Re: E12 in Folsom, CA?
-
Gavin
19:46:16 12/13/01
(2)
Re: E12 in Folsom, CA?
-
Sam R.
20:21:01 12/13/01
(0)
Re: E12 in Folsom, CA?
-
Sam R.
20:02:07 12/13/01
(0)
E12 News from South Africa (longish)
-
Klaus Wiehl
15:13:10 12/13/01
(0)
learning about engines, 101, 3.5liter vs 2.8liter
-
Adam Wilson
13:25:27 12/13/01
(13)
Re: learning about engines, 101, 3.5liter vs 2.8liter
-
Wietse
15:09:46 12/13/01
(0)
Re: learning about engines, 101, 3.5liter vs 2.8liter
-
Troy Rudolph
15:05:47 12/13/01
(11)
thanks Troy and Wietse, plus more ??'s
-
Adam Wilson
15:27:53 12/13/01
(10)
3.3 vs 3.5
-
Sam R.
19:24:37 12/13/01
(2)
Re: 3.3 vs 3.5
-
Troy Rudolph
19:55:18 12/13/01
(1)
Re: 3.3 vs 3.5
-
Sam R.
19:59:37 12/13/01
(0)
Re: thanks Troy and Wietse, plus more ??'s
-
Jim Davis
18:12:23 12/13/01
(2)
Re: thanks Troy and Wietse, plus more ??'s
-
Don Daynes
18:27:59 12/13/01
(1)
Oh, I see. Thanks for the clarification. (nt)
-
Jim Davis
19:20:38 12/13/01
(0)
Re: thanks Troy and Wietse, plus more ??'s
-
Troy Rudolph
16:19:01 12/13/01
(3)
I should have clarified on intake requirements
-
Adam Wilson
16:28:02 12/13/01
(2)
Re: I should have clarified on intake requirements
-
Wietse
18:55:04 12/13/01
(1)
wow, that advice is hard to ignore (eom)
-
Adam Wilson
10:13:17 12/14/01
(0)
Spam Bustin'
-
Chuck Denson
13:10:39 12/13/01
(1)
That's sick...You're a bad, bad man.... I like it!
-
Lars PNW 81_528i
16:20:35 12/13/01
(0)
Mustang Injectors
-
Chris
13:03:26 12/13/01
(3)
Re: Mustang Injectors
-
Troy Rudolph
15:08:10 12/13/01
(0)
Re: Mustang Injectors
-
Peter florance
14:19:21 12/13/01
(1)
Re: Mustang Injectors
-
Greg
14:24:02 12/13/01
(0)
OKTOBERFEST 2002 - Part II
-
Eric
12:38:18 12/13/01
(0)
attn: Luke, you bringin' the M535i to Chicago?
-
Adam Wilson
12:31:22 12/13/01
(1)
Re: attn: Luke, you bringin' the M535i to Chicago?
-
Luke
18:45:35 12/13/01
(0)
How much does an 81 528i weigh?
-
Kudgel
11:45:41 12/13/01
(3)
Re: How much does an 81 528i weigh?
-
Don Daynes
18:07:44 12/13/01
(0)
1310 Kilograms (times 2.2 for pounds)
-
Lars PNW 81_528i
16:34:13 12/13/01
(0)
Re: How much does an 81 528i weigh?
-
billy
12:11:00 12/13/01
(0)
Alternate fuel
-
Peter de Vry
11:45:26 12/13/01
(2)
Re: Alternate fuel
-
HimiZoli
06:16:03 12/14/01
(0)
Re: Alternate fuel
-
Troy Rudolph
12:25:49 12/13/01
(0)
Daily Driver? Safety? Precautions? (more)
-
Joe Hahn
11:41:28 12/13/01
(11)
more opinions
-
Robert Bondi
01:35:02 12/14/01
(0)
you've come to the right place)
-
Dennis
22:31:31 12/13/01
(0)
you've come to the right place)
-
Dennis
22:29:07 12/13/01
(0)
You'll Love It
-
Karl
16:33:14 12/13/01
(0)
Almost crush-proof
-
Lars PNW 528i 77,81
13:08:42 12/13/01
(2)
Re: Almost crush-proof
-
Jim Race
14:25:52 12/13/01
(1)
DUDE! What happened?
-
Joe
15:11:20 12/13/01
(0)
Re: Daily Driver? Safety? Precautions? (more)
-
Lee Wareham
11:51:36 12/13/01
(3)
Re: Daily Driver? Safety? Precautions? (more)
-
Peter Florance
12:46:53 12/13/01
(0)
Thanks Lee! That's just what I wanted to hear.
-
Joe
11:59:00 12/13/01
(1)
Yes, I have kids...
-
Scott
13:43:00 12/13/01
(0)
One of our mates in South Africa , , , ,
-
Jefflee
11:17:44 12/13/01
(1)
I seem to remember a write up on the car but cant
-
Sam Schultz
11:38:18 12/13/01
(0)
Rear Window Defroster Repair Links
-
Jim Davis
10:56:53 12/13/01
(0)
Karl, how's your mileage with 3.0 bar regulator
-
Peter Florance
08:57:02 12/13/01
(3)
Fine
-
Karl
16:38:56 12/13/01
(2)
Re: Fine
-
Kaveman
17:08:56 12/13/01
(1)
Re: Fine
-
Peter Florance
11:50:42 12/14/01
(0)
Fuel Light Question
-
Scott
08:08:06 12/13/01
(2)
Re: Fuel Light Question
-
Erich M_SCAL81/633
12:40:42 12/13/01
(0)
Re: Fuel Light Question
-
James
09:03:39 12/13/01
(0)
update - got Alpina Wheels. WooHoo!
-
Greg Szczyrbak
07:37:22 12/13/01
(13)
wow, you lucky dog
-
Adam Wilson
10:48:57 12/13/01
(12)
NLA?
-
Troy Rudolph
12:37:43 12/13/01
(5)
Re: NLA?
-
Frank H
21:07:42 12/13/01
(1)
Re: NLA?
-
T. Han
23:27:59 12/13/01
(0)
not the ones for the E12
-
Adam Wilson
12:49:46 12/13/01
(2)
Very Disappointing... Hmmm.....
-
Troy Rudolph
12:57:19 12/13/01
(1)
maybe between $1K to $1.5K to the right buyer(eom)
-
Adam Wilson
13:26:40 12/13/01
(0)
Re: wow, you lucky dog
-
T. Han
11:33:56 12/13/01
(5)
Re: wow, you lucky dog
-
Greg
11:40:19 12/13/01
(4)
Re: wow, you lucky dog
-
T. Han
23:22:38 12/13/01
(0)
yeah, $100 for the set? Jeez.
-
Adam Wilson
12:29:15 12/13/01
(2)
Well, I didn't want to be embarrassed if T. Han ..
-
Greg
12:36:05 12/13/01
(1)
Re: Well, I didn't want to be embarrassed if T. Ha
-
Adam Wilson
12:48:27 12/13/01
(0)
Smoke Screen
-
Charles Taylor
05:07:19 12/13/01
(4)
Re: Smoke Screen
-
Don Daynes
12:05:01 12/13/01
(0)
Re: Smoke Screen
-
T. Han
11:46:49 12/13/01
(0)
What weight oil are you using?
-
Jim Davis
11:15:15 12/13/01
(1)
Re: What weight oil are you using?
-
Charles Taylor
14:33:51 12/14/01
(0)
Paging Robert McIntosh or his friend...
-
Don Daynes
23:48:20 12/12/01
(0)
LEGALLY BLAST YOUR ADS TO 7,000,000 OPT-IN SUBSCIB
-
Derik
22:36:05 12/12/01
(1)
complaint sent to pwebtech.com
-
spam slammer
06:23:04 12/13/01
(0)
LEGALLY BLAST YOUR ADS TO 7,000,000 OPT-IN SUBSCIB
-
Derik
22:35:57 12/12/01
(1)
OK! Thats twice! Somebody NUKE THIS JERK!!!!!!!!!!
-
Scott
08:01:31 12/13/01
(0)
rear diff failure cont.
-
billy
21:27:45 12/12/01
(1)
Re: rear diff failure cont.
-
Mark Phillips
13:57:07 12/13/01
(0)
528i Sunroof repair/replacement?
-
Peter de Vry
17:48:14 12/12/01
(4)
Re: 528i Sunroof repair/replacement?
-
Karl
19:47:12 12/12/01
(3)
Re: 528i Sunroof repair/replacement?
-
T. Han
23:04:39 12/12/01
(2)
Re: 528i Sunroof repair/replacement?
-
Peter de Vry
11:39:01 12/13/01
(1)
Haven't seen that... (nt)
-
Karl
16:47:23 12/13/01
(0)
trunk question - 528i
-
Peter Florance
17:17:15 12/12/01
(3)
Re: trunk question - 528i
-
Don Daynes
20:27:12 12/12/01
(2)
Re: trunk question - 528i
-
Peter Florance
21:18:49 12/12/01
(1)
Re: trunk question - 528i
-
David B
01:02:24 12/13/01
(0)
free motor parts
-
dadbeh
10:30:44 12/12/01
(0)
Rear Window Defroster not functioning.
-
Martyn Smith
10:22:50 12/12/01
(7)
Re: Rear Window Defroster not functioning.HELP!!!!
-
Patrick
22:12:52 12/12/01
(1)
Re: Rear Window Defroster not functioning.HELP!!!!
-
Peter Florance
06:25:22 12/13/01
(0)
Re: Rear Window Defroster not functioning.
-
Jim Davis
10:52:39 12/12/01
(4)
Re: Rear Window Defroster not functioning.
-
Karl
19:52:31 12/12/01
(1)
Ahh. Right. Thanks for the clarification. (nt)
-
Jim Davis
10:42:26 12/13/01
(0)
Sounds like a fun little project,
-
Martyn Smith
13:08:35 12/12/01
(1)
Re: Sounds like a fun little project,
-
Peter Florance
17:19:00 12/12/01
(0)
interior lights haunted
-
Adam Wilson
10:07:58 12/12/01
(0)
wet trunk
-
stewart
09:19:01 12/12/01
(2)
Re: wet trunk
-
Jim Davis
10:27:14 12/12/01
(1)
Re: wet trunk
-
Jefflee
14:07:49 12/12/01
(0)
Still diagnosing...Throttle switch? (long)
-
Ellis
08:10:45 12/12/01
(9)
Re: Still diagnosing...Throttle switch? (long)
-
Bob Iverach
19:03:43 12/12/01
(0)
Re: Still diagnosing...Throttle switch? (long)
-
Troy Rudolph
11:34:24 12/12/01
(0)
Re: Still diagnosing...Throttle switch? (long)
-
Peter Florance
08:21:50 12/12/01
(6)
Re: Still diagnosing...Throttle switch? (long)
-
Ellis
08:30:51 12/12/01
(5)
Re: Still diagnosing...Throttle switch? (long)
-
Peter Florance
09:10:25 12/12/01
(4)
Re: Still diagnosing...Throttle switch? (long)
-
Ellis
13:51:01 12/12/01
(3)
Re: Still diagnosing...Throttle switch? (long)
-
Peter Florance
17:23:00 12/12/01
(2)
Re: Still diagnosing...Throttle switch? (long)
-
Ellis
06:42:51 12/13/01
(1)
Re: Still diagnosing...Throttle switch? (long)
-
Peter Florance
07:29:22 12/13/01
(0)
Promoted our e12s tonight (very long)
-
Jim Davis
23:56:23 12/11/01
(3)
Correction...
-
Jim Davis
09:54:27 12/12/01
(0)
aren't you in the Dallas area?
-
Robert Bondi
04:22:19 12/12/01
(1)
You have mail...(eom)
-
Jim Davis
10:25:40 12/12/01
(0)
Tranmission Weight?
-
Randy Clark
23:33:46 12/11/01
(2)
Re: Tranmission Weight?
-
Kaveman
00:58:43 12/12/01
(1)
CR 5/sp about 90lbs (nt)
-
Jefflee
14:05:49 12/12/01
(0)
Schrick Camshaft Identification?
-
Alex Biro
21:36:35 12/11/01
(5)
Re: Schrick Camshaft Identification?
-
Alex M. Biro
21:55:47 12/11/01
(3)
Re: Schrick Camshaft Identification?
-
Frank H
22:47:49 12/11/01
(2)
Re: Schrick Camshaft Identification?
-
Alex M. Biro
23:41:22 12/11/01
(1)
Re: Schrick Camshaft Identification?
-
Frank H
10:42:55 12/12/01
(0)
Re: Schrick Camshaft Identification?
-
Alex Biro
21:45:32 12/11/01
(0)
O2 Sensor Question
-
Jim Ockner
19:51:45 12/11/01
(6)
O2, Part 2 (longish)
-
Jim Ockner
22:39:48 12/11/01
(1)
Re: O2, Part 2 (longish)
-
Peter Florance
05:56:31 12/12/01
(0)
Re: O2 Sensor Question
-
Peter Florance
21:24:15 12/11/01
(2)
Re: O2 Sensor Question
-
Jim Davis
22:50:38 12/11/01
(1)
Re: O2 Sensor Question
-
Karl
20:11:57 12/12/01
(0)
Re: O2 Sensor Question
-
Robert Bondi
20:16:21 12/11/01
(0)
rear dif mount failure????
-
billy
19:46:19 12/11/01
(6)
Re: rear dif mount failure????
-
Ryan Bryan
22:20:45 12/11/01
(0)
Re: rear dif mount failure????
-
Stan
20:54:04 12/11/01
(0)
Re: rear dif mount failure????
-
Jeff C
20:17:00 12/11/01
(3)
my fix is in the FAQ
-
Peter Florance
21:20:12 12/11/01
(2)
Re: my fix is in the FAQ
-
Karl
20:28:16 12/12/01
(1)
Re: my fix is in the FAQ
-
Peter Florance
21:21:12 12/12/01
(0)
Fuel misadventures/theories
-
Alec
18:00:49 12/11/01
(2)
Re: Fuel misadventures/theories
-
Frank H
18:09:53 12/11/01
(1)
Re: Fuel misadventures/theories
-
greghill
18:36:39 12/11/01
(0)
Alternator shakes
-
Collins
17:16:48 12/11/01
(3)
Re: Alternator shakes
-
Eric
17:33:30 12/11/01
(2)
Re: Alternator shakes-cure
-
Peter Claassen
19:09:40 12/11/01
(1)
P.S.
-
Eric
19:18:55 12/11/01
(0)
Fuel Pressure....Cont....
-
Kaveman
16:58:14 12/11/01
(2)
Green Thingy
-
greghill
19:08:47 12/11/01
(1)
Re: Green Thingy
-
Kaveman
19:16:57 12/11/01
(0)
UpSide to Changing the Fuel Pump...
-
Kaveman
16:51:58 12/11/01
(0)
sub-frame mounts continued
-
greghill
14:17:39 12/11/01
(6)
before you do too much..
-
Peter Florance
06:15:40 12/12/01
(0)
Re: sub-frame mounts continued
-
Eric
17:13:30 12/11/01
(1)
Re: sub-frame mounts continued
-
greghill
18:28:42 12/11/01
(0)
Hollywood approach
-
Dean
15:41:58 12/11/01
(0)
Re: sub-frame mounts continued
-
Robert Bondi
14:29:21 12/11/01
(1)
Re: sub-frame mounts continued
-
greghill
16:47:28 12/11/01
(0)
ignition switch
-
Michael
13:20:39 12/11/01
(1)
Re: ignition switch
-
Sam Schultz
14:45:42 12/11/01
(0)
parts wanted, questions, euro headlights
-
Adam Wilson
09:48:57 12/11/01
(4)
Re: parts wanted, questions, euro headlights
-
greghill
11:52:05 12/11/01
(0)
Can you post a pic of what they look like?
-
Scott
10:35:39 12/11/01
(0)
Where did you get these? I am interested!
-
Martyn Smith
10:03:43 12/11/01
(1)
Cibie lights parts source
-
Adam Wilson
10:38:41 12/11/01
(0)
Fuel Pressure.... Another Question....
-
Kaveman
09:43:43 12/11/01
(9)
Re: Fuel Pressure....vapor lock
-
David B
23:54:48 12/11/01
(4)
spark, that's what I was wondering....
-
Peter Florance
06:18:45 12/12/01
(3)
Re: spark, that's what I was wondering....
-
Kaveman
09:11:02 12/12/01
(2)
Thanks!!!!
-
Peter Florance
21:22:18 12/12/01
(1)
Re: Thanks!!!!
-
Kaveman
22:27:57 12/12/01
(0)
holding fuel pressure
-
Robert bondi
14:09:29 12/11/01
(0)
my thought is...
-
Peter Florance
13:27:21 12/11/01
(1)
Here Here, Try to resolder joints on the relay.
-
Collins
14:58:37 12/11/01
(0)
Re: Fuel Pressure.... Another Question....
-
greghill
11:58:05 12/11/01
(0)
Paging Klaus Wiehl...
-
Dave Spencer
07:05:27 12/11/01
(1)
Re: Paging Klaus Wiehl...
-
Klaus Wiehl
14:16:45 12/11/01
(0)
Right Turn Signal causes hazard to flash
-
Brian Esslinger
01:42:02 12/11/01
(1)
Re: Right Turn Signal causes hazard to flash
-
Carlie Bentley
05:00:54 12/11/01
(0)
O2 sensor wiring question
-
Robert Bondi
01:15:25 12/11/01
(11)
O2 sensor placement: Is there a too far?
-
Robert Bondi
14:42:43 12/11/01
(1)
Re: O2 sensor placement: Is there a too far?
-
Peter Florance
15:44:01 12/11/01
(0)
Re: O2 sensor wiring question
-
Troy Rudolph
10:54:27 12/11/01
(5)
suggestion on heated sensor model?
-
Robert Bondi
14:21:08 12/11/01
(4)
Re: suggestion on heated sensor model?
-
Peter Florance
19:42:46 12/11/01
(0)
Re: suggestion on heated sensor model?
-
Troy Rudolph
15:55:49 12/11/01
(0)
Also doesnt steel dissapate heat better than Iron?
-
Scott
15:49:23 12/11/01
(1)
Re: Also doesnt steel dissapate heat better than Iron?
-
Robert Bondi
16:20:29 12/11/01
(0)
Re: O2 sensor wiring question
-
Peter Florance
06:30:15 12/11/01
(2)
Robert, Is there a required or suggested...
-
Scott
08:06:50 12/11/01
(1)
Re: Robert, Is there a required or suggested...
-
Robert bondi
14:14:27 12/11/01
(0)
Anyone have 5 speed tranny for sale?
-
Nathan
23:55:48 12/10/01
(5)
Re: Anyone have 5 speed tranny for sale?
-
billy
20:20:42 12/11/01
(1)
Re: Anyone have 5 speed tranny for sale?
-
Rob
10:41:10 12/12/01
(0)
Re: Anyone have 5 speed tranny for sale?
-
Don Daynes
00:08:35 12/11/01
(2)
Re: Anyone have 5 speed tranny for sale?
-
Nathan
14:39:22 12/11/01
(1)
Re: Anyone have 5 speed tranny for sale?
-
Don Daynes
15:38:33 12/11/01
(0)
AFM Questions Again - 001
-
Randy Clark
20:21:45 12/10/01
(3)
Re: AFM Questions Again - 001
-
Peter Florance
20:51:49 12/10/01
(2)
Re: AFM Questions Again - 001
-
Farokh
12:30:26 12/12/01
(1)
sorry
-
Peter Florance
06:00:45 12/13/01
(0)
Who wants it?
-
Kevin McD
19:24:19 12/10/01
(4)
check email from me too!
-
Nick
22:31:40 12/10/01
(1)
Re: check email from me too!
-
Kevin McD
08:10:07 12/11/01
(0)
check your email
-
Peter Florance
19:38:34 12/10/01
(1)
You too...
-
Kevin
20:19:21 12/10/01
(0)
Maroon E12 on Cabrillo near 46Ave San Fran-anyone?
-
Dean
18:29:52 12/10/01
(0)
Anyone need NEW water-pump for E-12
-
Jefflee
16:37:23 12/10/01
(0)
AFM part numbers.
-
Michael
13:28:19 12/10/01
(5)
Re: AFM part numbers.
-
Jim Davis
17:38:30 12/10/01
(0)
Re: AFM part numbers.
-
Troy Rudolph
13:36:33 12/10/01
(3)
Re: AFM part numbers.
-
Michael
13:56:52 12/10/01
(2)
Re: AFM part numbers.
-
Sam Schultz
18:05:18 12/10/01
(0)
I can get one for you off a parts car..
-
Scott
14:16:46 12/10/01
(0)
fog lights
-
Steve Chandler
12:54:31 12/10/01
(3)
Re: fog lights
-
Robert Bondi
19:23:17 12/10/01
(2)
Re: fog lights
-
steve chandler
23:18:16 12/10/01
(1)
Re: fog lights
-
Robert Bondi
23:35:07 12/10/01
(0)
Won't Start
-
Troy Rudolph
12:54:22 12/10/01
(16)
The Verdict
-
Troy Rudolph
15:52:16 12/11/01
(0)
Re: Won't Start.... My $.02....
-
Kaveman
23:16:23 12/10/01
(0)
THE MOST LIKELY CONCLUSION
-
Nick_1981_528i
22:24:44 12/10/01
(0)
Re: Won't Start
-
Mark
19:51:53 12/10/01
(0)
Re: Won't Start
-
Don Daynes
19:04:39 12/10/01
(0)
Re: Won't Start
-
Jim Davis
17:31:11 12/10/01
(0)
Re: Won't Start
-
Peter Florance
17:20:42 12/10/01
(0)
wait a minute, when you guys turn your key
-
Scott
13:26:03 12/10/01
(4)
Re: wait a minute, when you guys turn your key
-
Luke
13:44:47 12/10/01
(3)
Re: wait a minute, when you guys turn your key
-
Don Daynes
18:46:11 12/10/01
(1)
cool..Thanks Don!! (nt)
-
Scott
21:15:12 12/10/01
(0)
NOT sarcasm, seriously...I have to do it twice..
-
Scott
13:57:30 12/10/01
(0)
Re: Won't Start
-
Luke
13:04:03 12/10/01
(3)
Re: Won't Start
-
Troy Rudolph
13:39:05 12/10/01
(2)
Re: Won't Start--voltage
-
David B
00:23:48 12/11/01
(0)
Re: Won't Start
-
Sam Schultz
14:54:00 12/10/01
(0)
auto to 5 speed conversion? 3.45 LSD FS
-
Rob
12:21:01 12/10/01
(2)
Re: auto to 5 speed conversion? 3.45 LSD FS
-
mikey
18:44:12 12/10/01
(1)
thanks very much mikey !
-
Rob
14:31:43 12/11/01
(0)
WTB stock intake airbox
-
Jim Davis
11:52:10 12/10/01
(2)
Re: WTB stock intake airbox
-
Scott
14:12:46 12/10/01
(0)
Re: WTB stock intake airbox
-
Rob
12:15:20 12/10/01
(0)
Question about headers
-
Jim Davis
11:12:11 12/10/01
(0)
distributor slack
-
greghill
10:20:12 12/10/01
(2)
Re: distributor slack
-
Peter Florance
10:51:54 12/10/01
(1)
nothing to compare
-
greghill
15:10:29 12/10/01
(0)
Newbie, heater question 77 530i
-
Joe
10:18:50 12/10/01
(6)
Re: Newbie, heater question 77 530i
-
Randy Clark
20:44:33 12/10/01
(0)
Re: Newbie, heater question 77 530i
-
Randy Clark
20:44:33 12/10/01
(0)
this is the same way I got my 78 530i
-
Sam Schultz
14:56:41 12/10/01
(0)
Re: Newbie, heater question 77 530i
-
steven chandler
13:00:26 12/10/01
(2)
Re: Newbie, heater question 77 530i
-
Joe
15:33:42 12/10/01
(1)
FAQ modifications?
-
Chuck Denson
19:23:35 12/10/01
(0)
L-Jet hesitation problem
-
TCD
08:29:54 12/10/01
(2)
Re: L-Jet hesitation problem
-
Kaveman
10:19:51 12/10/01
(1)
Re: L-Jet hesitation problem
-
Peter Florance
10:50:25 12/10/01
(0)
Feelers for OKTOBERFEST 2002 - Colorado
-
Eric
01:39:48 12/10/01
(8)
Re: Feelers for OKTOBERFEST 2002 - Colorado
-
Walt Barie
08:11:15 12/11/01
(0)
Re: Feelers for OKTOBERFEST 2002 - Colorado
-
Kaveman
23:18:06 12/10/01
(0)
Re: Feelers for OKTOBERFEST 2002 - Colorado
-
Don Daynes
18:42:03 12/10/01
(0)
Re: Feelers for OKTOBERFEST 2002 - Colorado
-
Lee Wareham
11:38:00 12/10/01
(0)
Re: Feelers for OKTOBERFEST 2002 - Colorado
-
Frank H
10:06:16 12/10/01
(3)
Re: Feelers for OKTOBERFEST 2002 - Colorado
-
Eric
18:11:56 12/10/01
(2)
Re: Feelers for OKTOBERFEST 2002 - Colorado
-
Frank H
21:57:48 12/10/01
(1)
Re: Feelers for OKTOBERFEST 2002 - Colorado
-
Greg
07:38:55 12/11/01
(0)
Spare Parts, Must Go, Cheap!
-
Jeremy T
00:28:41 12/10/01
(5)
Re: Spare Parts, Must Go, Cheap!
-
Patrick
06:40:18 12/11/01
(1)
Re: Spare Parts, Must Go, Cheap!
-
Jeremy T
08:58:36 12/11/01
(0)
Re: Spare Parts, Must Go, Cheap!
-
Mishst
11:55:59 12/10/01
(0)
Re: Spare Parts, Must Go, Cheap!
-
Mishst
11:55:57 12/10/01
(0)
Re: Spare Parts, Must Go, Cheap!
-
Jimmie
09:10:58 12/10/01
(0)
points/ignition
-
dennis
22:57:32 12/09/01
(1)
what's the part number on your coil?
-
Peter Florance
06:50:58 12/10/01
(0)
Where is the O2 Sensor Reset Switch?
-
Mr. Coffey
15:20:26 12/09/01
(3)
Re: Where is the O2 Sensor Reset Switch?
-
Don Daynes
17:20:35 12/09/01
(1)
Thanks again!
-
Mr. Coffey
23:19:12 12/09/01
(0)
(Sorry...1979 528i) nt
-
Mr. Coffey
15:23:22 12/09/01
(0)
please define sub-frame mounts
-
greghill
14:58:54 12/09/01
(5)
took a look
-
greghill
10:18:04 12/10/01
(1)
Re: took a look
-
Eric
19:11:36 12/10/01
(0)
Re: please define sub-frame mounts
-
Peter Florance
07:10:52 12/10/01
(0)
Re: please define sub-frame mounts
-
Eric
01:30:41 12/10/01
(1)
Dumb follow up
-
Eric
01:34:13 12/10/01
(0)
E12 polished intake, control arms, distributor FS
-
Rob
13:11:21 12/09/01
(1)
Re: E12 polished intake, control arms, distributor FS
-
billy
19:52:43 12/09/01
(0)
BMW 530i No Start
-
Dan Lafley
13:01:06 12/09/01
(4)
Re: BMW 530i No Start
-
Peter Florance
18:47:57 12/09/01
(0)
Re: BMW 530i No Start
-
Sam Schultz
18:14:39 12/09/01
(2)
Re: BMW 530i No Start
-
Dan Lafley
19:07:16 12/09/01
(1)
Re: BMW 530i No Start
-
Sam Schultz
19:32:42 12/09/01
(0)
Chrome Passenger Mirror on Ebay
-
Jim Hineline
12:07:48 12/09/01
(0)
Magical mystery sauces
-
T. Han
11:41:58 12/09/01
(1)
Re: Magical mystery sauces
-
Nick_1981_528i
12:14:40 12/09/01
(0)
urethane bushes for the e12
-
Paul Gray
05:02:09 12/09/01
(0)
Re: e12 for parts
-
Michael Longeneker
04:12:05 12/09/01
(0)
TSW Hockenheim Rs for sale - CLARIFICATION
-
Eric
03:51:32 12/09/01
(0)
wife shopping, got to work on car...
-
billy
01:14:10 12/09/01
(0)
about the points,,,,
-
Dennis
23:03:33 12/08/01
(3)
right ign coil?
-
Robert Bondi
06:47:55 12/09/01
(0)
Used to have this problem on a VW bug
-
Lars PNW 81_528i
23:22:00 12/08/01
(1)
Re: Used to have this problem on a VW bug
-
Sam Schultz
20:14:15 12/09/01
(0)
Oil leaking
-
Nathan
22:06:22 12/08/01
(1)
Re: Oil leaking
-
Don Daynes
00:10:52 12/09/01
(0)
78 570i reactor replacement
-
Nathan
21:56:20 12/08/01
(2)
Re: 78 570i reactor replacement
-
fred
06:17:00 12/10/01
(0)
Re: 78 570i reactor replacement
-
Bill Barrett
00:05:42 12/09/01
(0)
Question about setting timing
-
Mr. Coffey
20:04:34 12/08/01
(3)
Thanks for the help!
-
Mr. Coffey
15:22:25 12/09/01
(0)
Re: Question about setting timing
-
David B
01:23:18 12/09/01
(0)
Re: Question about setting timing
-
Don Daynes
23:24:38 12/08/01
(0)
a "shocking" question
-
Nick_1981_528i
18:13:11 12/08/01
(1)
Re: a "shocking" question
-
Don Daynes
23:30:30 12/08/01
(0)
How do you mount an M30 on a stand?
-
Adam B
18:03:05 12/08/01
(2)
Re: How do you mount an M30 on a stand?
-
Don Daynes
23:36:38 12/08/01
(1)
Thanks (EOM)
-
Adam B
22:33:04 12/09/01
(0)
F/S '80 528i in so. NH
-
John in NH
16:07:18 12/08/01
(7)
Re: F/S '80 528i in so. NH
-
Eric
03:58:32 12/09/01
(0)
Thank God you don't have the CASH... Did You Say
-
Lars 81_528i PNW
17:40:34 12/08/01
(5)
...Did You Say ...that's what I said
-
John in NH
06:20:58 12/09/01
(0)
Oops forgot e-mail... In case I offend.....(eom)
-
Lars PNW
17:42:33 12/08/01
(3)
Is it maybe the car in the classifieds...
-
Timmer
19:47:41 12/08/01
(2)
Re: Is it maybe the car in the classifieds...NOPE
-
John in NH
22:07:11 12/08/01
(1)
take a look on traderonline.com...
-
Timmer
09:28:42 12/09/01
(0)
need Eibachs and rear struts, where to buy?
-
adam
14:27:37 12/08/01
(2)
Addl. question: any particular type required?
-
Nick_1981_528i
17:13:12 12/08/01
(0)
Watch Ebay I got a set new old stock for $50.00
-
Stan
16:46:57 12/08/01
(0)
What Wheels will fit the e-12
-
Adam
14:24:01 12/08/01
(0)
Re. Combo relay on 530i
-
Ellis
13:34:03 12/08/01
(1)
Re: Re. Combo relay on 530i
-
Robert Bondi
14:11:53 12/08/01
(0)
The dreaded Zenith 35/40 INAT (with TM) i think
-
bruce
21:26:16 12/07/01
(6)
water hose
-
Robert Bondi
14:13:59 12/08/01
(0)
Re: The dreaded Zenith 35/40 INAT (with TM) i think
-
Randy Clark
09:34:45 12/08/01
(1)
Re: The dreaded Zenith 35/40 INAT (with TM) i think
-
bruce
15:05:54 12/08/01
(0)
Have you tried the E3 (Senior Six) board??
-
Lars PNW 81_528i
21:39:51 12/07/01
(2)
Re: Have you tried the E3 (Senior Six) board??
-
Mark
22:06:09 12/07/01
(1)
Re: Have you tried the E3 (Senior Six) board??
-
bruce
14:59:28 12/08/01
(0)
AFM - fuel pump contact
-
Robert Bondi
20:59:06 12/07/01
(6)
thanks for advice...more tests
-
Robert Bondi
14:41:09 12/08/01
(1)
Re: thanks for advice...more tests
-
Don Daynes
23:49:20 12/08/01
(0)
Re: AFM - fuel pump contact
-
David B
11:25:23 12/08/01
(0)
Re: AFM - fuel pump contact/ok NIKINC
-
Dennis
22:54:20 12/07/01
(1)
Re: AFM - fuel pump contact/ok NIKINC
-
Robert Bondi
14:16:41 12/08/01
(0)
Re: AFM - fuel pump contact
-
Peter Florance
21:24:24 12/07/01
(0)
attn: e. quon
-
billy
19:22:09 12/07/01
(0)
fuel injector 280-150-152 vs 280-150-150
-
Alec
17:14:03 12/07/01
(1)
Re: fuel injector 280-150-152 vs 280-150-150
-
Peter Florance
17:54:30 12/07/01
(0)
Pinging on accel with premium fuel. Retard?
-
Trubey
17:01:26 12/07/01
(1)
Re: Pinging on accel with premium fuel. Retard?
-
Peter Florance
17:53:45 12/07/01
(0)
78 with fuel smells/E12 owner Christmas gift?
-
Alec
16:33:10 12/07/01
(6)
Re: 78 with fuel smells/E12 owner Christmas gift?
-
Robert Bondi
19:57:03 12/07/01
(0)
Re: 78 with fuel smells/E12 owner Christmas gift?
-
Adam Wilson
16:51:59 12/07/01
(3)
Re: 78 with fuel smells/E12 owner Christmas gift?
-
Alec
16:58:45 12/07/01
(2)
Re: 78 with fuel smells/E12 owner Christmas gift?
-
Alec
17:28:53 12/10/01
(0)
Fix the fuel leak
-
karl
20:50:46 12/07/01
(0)
tools
-
Sam Schultz
16:50:22 12/07/01
(0)
BMW FI: An Enlightened Approach
-
Jim Ockner
15:40:11 12/07/01
(0)
Looking to buy 320i intake runners
-
Gilbert S.
13:53:16 12/07/01
(2)
Found 4 from Robert need 2 more? Anybody? Help?
-
Gilbert S.
16:21:12 12/07/01
(0)
Re: Looking to buy 320i intake runners
-
Robert Bondi
14:04:01 12/07/01
(0)
Will a new cam widen the power band?
-
Bill Barrett
08:16:24 12/07/01
(3)
Re: Will a new cam widen the power band?
-
David B
01:52:58 12/09/01
(0)
Re: Will a new cam widen the power band?
-
Carlie Bentley
16:31:48 12/07/01
(0)
Re: Will a new cam widen the power band?
-
Mark
09:23:18 12/07/01
(0)
About to tackle heater blower.
-
Carlie Bentley
21:53:48 12/06/01
(3)
Its pretty straight forward !
-
Peter Claassen
23:41:03 12/06/01
(2)
Re: Its pretty straight forward !
-
Bob Iverach
14:18:21 12/07/01
(1)
Thanks.
-
Carlie Bentley
16:36:04 12/07/01
(0)
Dyno Day Results
-
Troy Rudolph (Webmaster)
21:45:59 12/06/01
(4)
Re: Dyno Day Results
-
John R. Bodden
00:23:26 12/07/01
(3)
Re: Dyno Day Results
-
Eric
03:48:24 12/09/01
(0)
Don't think so, dyno on other runs OK...
-
RussC
14:03:05 12/07/01
(1)
Re: Don't think so, dyno on other runs OK...
-
Raj
02:37:07 12/08/01
(0)
how much are blk leather recarro' worth
-
adam
19:11:54 12/06/01
(3)
I'd say $250-$500 depending. Power?
-
Trubey
11:14:38 12/09/01
(0)
Re: how much are blk leather recarro' worth
-
Kaveman
20:07:32 12/06/01
(1)
Re: how much are blk leather recarro' worth
-
adam
10:58:39 12/07/01
(0)
this wheel/tire size thing is freakin me out...
-
billy
17:08:50 12/06/01
(3)
Re: this wheel/tire size thing is freakin me out...
-
greghill
22:14:58 12/06/01
(0)
Re: this wheel/tire size thing is freakin me out...
-
Eric
17:57:31 12/06/01
(1)
Re: this wheel/tire size thing is freakin me out...
-
billy
22:08:59 12/06/01
(0)
gots multiple issues
-
greghill
16:19:43 12/06/01
(7)
Re: gots multiple issues
-
Randy clark
22:55:25 12/07/01
(0)
NO sillicon brake fluid
-
Adam Wilson
16:57:46 12/07/01
(0)
Re: gots multiple issues
-
mikey
19:18:22 12/06/01
(0)
Re: gots multiple issues
-
Eric
18:56:55 12/06/01
(0)
Re: gots multiple issues (long)
-
Frank H
18:37:08 12/06/01
(0)
Change to silicone requires all rubber changed
-
Lars PNW E12's
18:35:01 12/06/01
(1)
Re: Change to silicone requires all rubber changed
-
T. Han
13:45:27 12/07/01
(0)
flywheel balance
-
Michael
15:54:29 12/06/01
(2)
Re: flywheel balance
-
Troy Rudolph
19:32:23 12/06/01
(1)
Me Too
-
Karl
21:02:03 12/07/01
(0)
HELP HELP Need tranny schematic for
-
Jefflee
14:44:21 12/06/01
(1)
I Got the Diagram: Thanks to Anyone Looking
-
Jefflee
21:39:52 12/06/01
(0)
Any updates from Dyno Day...
-
RussC
13:10:21 12/06/01
(3)
The cars.&.the mods
-
Peter Claassen
23:57:44 12/06/01
(1)
Will be going again soon...
-
RussC
14:04:40 12/07/01
(0)
Troy...
-
Eric
13:44:21 12/06/01
(0)
e-12 available clarification
-
Dwight Plucker
11:54:21 12/06/01
(0)
Guess what my Boss payed for plugs/wires for...
-
Scott
11:11:25 12/06/01
(2)
Re: Guess what my Boss payed for plugs/wires for...
-
Sam Schultz
11:37:34 12/06/01
(1)
No Way Let 'em suffer, I tried to tell him,....
-
Scott
12:05:58 12/06/01
(0)
"Tornado" Gas Thingy... Pretty Funny.....
-
Kaveman
09:30:03 12/06/01
(2)
So, I use a "clapper " to turn on my headlights!
-
Randy McCafferty
10:52:10 12/06/01
(0)
Re: "Tornado" Gas Thingy... Pretty Funny.....
-
Troy Rudolph
10:32:10 12/06/01
(0)
Euro Bumper Owners - big favour
-
Canadian Bimmer
05:39:23 12/06/01
(2)
Re: Euro Bumper Owners - big favour
-
Mishast
10:53:25 12/06/01
(1)
Re: Euro Bumper Owners - big favour
-
Canadian Bimmer
20:32:54 12/06/01
(0)
sidedraft questions
-
JUSTIN (AUCKLAND, NZ)
03:19:33 12/06/01
(1)
Re: sidedraft questions
-
Mark
05:05:35 12/06/01
(0)
Jeez. That was quick..... back on the road.
-
Jim Race
01:39:43 12/06/01
(10)
Again, Glad your O.K.(eom)
-
Scott
21:16:31 12/06/01
(0)
Hope Im not being rude, but what happened anyway..
-
Scott
11:13:12 12/06/01
(3)
Re: Hope Im not being rude, but what happened anyway..
-
Jim Race
17:31:09 12/06/01
(2)
Question...
-
Eric
18:06:04 12/06/01
(1)
Re: Question...
-
Jim Race
23:39:15 12/06/01
(0)
Re: Jeez. That was quick..... back on the road.
-
Don Daynes
11:04:00 12/06/01
(1)
Re: Jeez. That was quick..... back on the road.
-
Jim Race
17:33:26 12/06/01
(0)
Re: Jeez. That was quick..... back on the road.
-
Jim Davis
09:49:54 12/06/01
(0)
Re: Jeez. That was quick..... back on the road.
-
Chuck Denson
07:00:17 12/06/01
(1)
Re: Jeez. That was quick..... back on the road.
-
Dennis
21:13:10 12/06/01
(0)
Gas Smell
-
Peter Claassen
23:44:35 12/05/01
(3)
Re: Gas Smell
-
Jim Davis
09:47:45 12/06/01
(0)
Re: Gas Smell
-
Peter Florance
00:07:27 12/06/01
(1)
Also...
-
Jeff C
08:23:20 12/06/01
(0)
Car of the Month - December
-
Troy Rudolph
20:33:09 12/05/01
(19)
nice paint!
-
James
13:22:29 12/07/01
(0)
Valve cover like whoa :)
-
Nick_1981_528i
20:15:38 12/06/01
(1)
Re: Valve cover like whoa :)
-
Randy Clark
22:31:49 12/07/01
(0)
Re: Car of the Month - December
-
Canadian Bimmer
05:33:16 12/06/01
(1)
Re: Car of the Month - December
-
Troy Rudolph (Webmaster)
10:31:08 12/06/01
(0)
The Great Pumpkin
-
Randy Clark
22:24:27 12/05/01
(1)
Re: The Great Pumpkin
-
Randy McCafferty
10:56:54 12/06/01
(0)
Oooh Oooh, oo=00=oo, I have questions.
-
Carlie Bentley
21:04:51 12/05/01
(11)
Re: Oooh Oooh, oo=00=oo, I have questions.
-
Randy Clark
22:21:17 12/05/01
(0)
Re: Oooh Oooh, oo=00=oo, I have questions.
-
Randy Clark
22:19:01 12/05/01
(4)
1977 vs. earlier 530i
-
Robert Bondi
22:35:44 12/05/01
(3)
Big Tank is the Washer Reservoir
-
Randy C
22:41:16 12/07/01
(0)
Re: 1977 vs. earlier 530i
-
Glued seam!!!
23:34:02 12/06/01
(1)
Re: 1977 vs. earlier 530i - Glued vs heliarc seam
-
Randy Clark
22:35:49 12/07/01
(0)
Re: Oooh Oooh, oo=00=oo, I have questions.
-
Kaveman
22:06:57 12/05/01
(0)
Excellent car by-the-way.
-
Carlie Bentley
21:08:59 12/05/01
(3)
Sweeeeeeeeeeeeeeeeeeeeeeeeetttt!!!!!!!!!
-
Scott
21:33:21 12/05/01
(2)
Clean, clean, clean.....
-
JB
22:54:15 12/05/01
(1)
Re: Clean, clean, clean.....
-
Randy C
22:44:43 12/07/01
(0)
Fuel Pressure.... Leaking Injectors.... More...
-
Kaveman
19:57:01 12/05/01
(6)
Re: Fuel Pressure.... Leaking Injectors.... More...
-
Don Daynes
23:21:17 12/05/01
(5)
Re: Fuel Pressure.... Leaking Injectors.... More...
-
Kaveman
12:59:44 12/06/01
(3)
Re: Fuel Pressure.... Leaking Injectors.... More...
-
Peter Florance
15:32:23 12/06/01
(2)
Re: Fuel Pressure.... Leaking Injectors.... More...
-
Kaveman
18:19:12 12/06/01
(1)
boneyard!!!
-
Peter Florance
18:58:24 12/06/01
(0)
Re: Fuel Pressure.... Leaking Injectors.... More...
-
Kaveman
00:27:03 12/06/01
(0)
Att: Luke- Ready for wheels ?
-
Jeff
19:50:52 12/05/01
(0)
Adapting E32 Block
-
John Connin
19:21:15 12/05/01
(1)
paging Karl Koenig
-
Peter Florance
16:08:29 12/06/01
(0)
Tie Rod questions
-
Steve Chandler
16:07:15 12/05/01
(3)
Re: Tie Rod questions
-
Robert Bondi
17:14:44 12/05/01
(0)
Steering rods and couplings
-
Lars PNW E12Z
17:11:49 12/05/01
(1)
Stinkin' Keyboard! "wear_not where & up and down"
-
Lars PNW E12Z
17:15:28 12/05/01
(0)
Calling Scott Caplan..
-
Steve Chandler
15:42:35 12/05/01
(1)
Oops..It was Jeff Caplan..sorry
-
Steve Chandler
16:08:42 12/05/01
(0)
one more try...oil pump question???
-
Scott
15:35:40 12/05/01
(2)
Re: one more try...oil pump question???
-
Robert Bondi
17:26:26 12/05/01
(0)
Re: one more try...oil pump question???
-
Don Daynes
16:19:14 12/05/01
(0)
73 degrees in Pittsburgh today...
-
Randy McCafferty
14:33:18 12/05/01
(5)
Re: 73 degrees in Pittsburgh today...
-
stewart
16:34:10 12/05/01
(0)
Re: 73 degrees in Pittsburgh today...
-
stewart
16:33:15 12/05/01
(0)
Re: 73 degrees in Pittsburgh today...
-
T.Han
16:22:39 12/05/01
(0)
somwhere around 72 in ATl GA...this is great...
-
Scott
14:57:02 12/05/01
(1)
high 60's in Rochester, N.Y. took the 2002...
-
Timmer
16:17:17 12/05/01
(0)
e 12 available
-
Dwight Plucker
12:51:52 12/05/01
(5)
Re: e 12 available
-
Jerry
21:25:07 12/05/01
(0)
location? (eom)
-
...tom
19:59:02 12/05/01
(0)
Re: e 12 available
-
stewart
16:20:45 12/05/01
(2)
Re: e 12 available
-
Dennis
21:16:57 12/06/01
(1)
Re: e 12 available
-
Dwight Plucker
13:40:27 12/09/01
(0)
Failing Heater Core?
-
Mishast
12:49:28 12/05/01
(2)
Re: Failing Heater Core?
-
Steve Chandler
16:11:56 12/05/01
(0)
Re: Failing Heater Core?
-
Randy McCafferty
15:29:23 12/05/01
(0)
FS: Authentic M535i rear deck spoiler
-
Jim Davis
11:37:01 12/05/01
(0)
OT: Electric powered BMW 507
-
Jim Davis
10:40:45 12/05/01
(2)
Needs fender flares. :-)
-
Carlie Bentley
20:57:29 12/05/01
(0)
IMHO: Would look better without white walls!
-
Randy McCafferty
12:19:50 12/05/01
(0)
Still diagnosing....
-
Ellis
09:11:10 12/05/01
(2)
Re: Still diagnosing....
-
Peter Florance
07:19:40 12/06/01
(0)
How do you know when they act up?
-
Ellis
02:39:15 12/06/01
(0)
Left field carb question.
-
Carlie Bentley
05:27:39 12/05/01
(24)
The only reason I concider it.
-
Carlie Bentley
20:53:39 12/05/01
(0)
if you're willing to go that far...
-
Peter Florance
17:10:27 12/05/01
(6)
Re: if you're willing to go that far...
-
Carlie Bentley
17:50:44 12/05/01
(5)
so what's the problem with batch?
-
Peter Florance
19:17:41 12/05/01
(4)
Batch?
-
Carlie Bentley
20:32:41 12/05/01
(3)
Re: Batch?
-
Peter Florance
00:06:05 12/06/01
(2)
Re: Batch?
-
Carlie Bentley
06:01:40 12/06/01
(1)
Re: Batch?
-
Scott
09:22:07 12/06/01
(0)
Re: Left field carb question.
-
Frank H
15:13:16 12/05/01
(0)
Re: Left field carb question.
-
Troy Rudolph
09:37:09 12/05/01
(0)
DO IT! If your uncle can tune a harley to run..
-
Scott
08:13:34 12/05/01
(7)
Re: DO IT! If your uncle can tune a harley to run..
-
Mark
09:37:13 12/05/01
(2)
I'm not BLAMING anything, I simply ..
-
Scott
11:50:22 12/05/01
(1)
Re: I'm not BLAMING anything, I simply ..
-
Mark
17:33:41 12/05/01
(0)
Re: DO IT! If your uncle can tune a harley to run..
-
Carlie Bentley
09:00:30 12/05/01
(3)
wait a minute?? will there be room?
-
Scott
12:07:39 12/05/01
(2)
Yeah, plenty of room.
-
Carlie Bentley
17:54:05 12/05/01
(0)
may need earlier style hood
-
Peter Florance
17:40:43 12/05/01
(0)
Re: Left field carb question.
-
Mark
06:41:03 12/05/01
(5)
Re: Left field carb question.
-
Carlie Bentley
08:59:06 12/05/01
(4)
Re: Left field carb question.
-
Peter Florance
09:41:48 12/05/01
(2)
Re: Left field carb question.
-
Carlie Bentley
20:30:44 12/05/01
(1)
Re: Left field carb question.
-
Peter Florance
00:13:02 12/06/01
(0)
Re: Left field carb question.
-
Mark
09:29:51 12/05/01
(0)
77 530i parts car + or - a few things
-
Michael Longeneker
23:46:10 12/04/01
(2)
Re: 77 530i parts car + or - a few things
-
Michael Longeneker
17:45:00 12/05/01
(1)
Re: 77 530i parts car + or - a few things
-
Nathan
23:44:28 12/08/01
(0)
rearview mirror upgrades???
-
Ryan Bryan
22:37:38 12/04/01
(1)
Re: rearview mirror upgrades???
-
Don Daynes
23:44:54 12/04/01
(0)
Free exhaust to good Seattle Home...read on
-
Bill Barrett
21:06:23 12/04/01
(3)
Re: Free exhaust to good Seattle Home...read on
-
Jim Hartwell
21:44:13 12/04/01
(2)
Re: Free exhaust to good Seattle Home...read on
-
Peter Maag
01:11:12 12/05/01
(1)
Re: Lilliwaup? Sure
-
Jim Hartwell
19:44:06 12/05/01
(0)
Fuel Pressure.... Leaking Injectors.... Followup
-
Kaveman
20:35:49 12/04/01
(4)
loosing prime - prepump?
-
Peter Florance
07:34:55 12/05/01
(0)
Re: Fuel Pressure.... Leaking Injectors.... Followup
-
Don Daynes
23:26:48 12/04/01
(0)
Re: Fuel Pressure.... Leaking Injectors.... Followup
-
Mark
22:11:33 12/04/01
(0)
Re: Fuel Pressure.... Leaking Injectors.... Followup
-
Peter Florance
20:51:49 12/04/01
(0)
Wanted: used front rotors
-
Robert Holly
17:22:45 12/04/01
(3)
hubs or rotors?
-
Peter Florance
18:10:30 12/04/01
(2)
Re: Dooh! I mean hubs...
-
Robert Holly
20:11:02 12/04/01
(1)
i have some
-
mikey
21:54:13 12/04/01
(0)
Looking for a good salvage yard in NorCal
-
Mr. Coffey
15:12:03 12/04/01
(5)
Re: Looking for a good salvage yard in NorCal
-
medfly
20:18:17 12/04/01
(1)
Re: Looking for a good salvage yard in NorCal
-
Peter Claassen
23:40:28 12/05/01
(0)
Re: Looking for a good salvage yard in NorCal
-
Mark Phillips
15:26:31 12/04/01
(0)
Re: Looking for a good salvage yard in NorCal
-
Mark Phillips
15:25:59 12/04/01
(1)
Re: Looking for a good salvage yard in NorCal
-
Mark
22:14:00 12/04/01
(0)
WINDOW
-
STAN
15:05:17 12/04/01
(6)
where are ya and please stop shouting!
-
...tom
19:48:21 12/04/01
(5)
sorry did not mean to yell had the caps lock
-
Stan
20:16:47 12/04/01
(4)
Re: WHICH ONE? I MAY HAVE ONE.,...
-
Bill Bowes
20:49:31 12/04/01
(3)
Re: WHICH ONE? I MAY HAVE ONE.,...
-
stan
21:19:49 12/04/01
(0)
Re: WHICH ONE? I MAY HAVE ONE.,...
-
stan
21:06:18 12/04/01
(1)
Re: WHICH ONE? I MAY HAVE ONE.,...
-
Jefflee
21:27:07 12/04/01
(0)
Front wheel brg prices
-
Erich M_SCAL81/633
14:41:46 12/04/01
(2)
Re: Front wheel brg prices
-
Mark80528i
07:22:05 12/05/01
(0)
Re: Front wheel brg prices
-
Peter Florance
15:17:42 12/04/01
(0)
Re:
-
Randy McCafferty
14:40:34 12/04/01
(2)
me?
-
Robert Bondi
18:27:50 12/04/01
(1)
Re: me?
-
Randy M
08:19:21 12/05/01
(0)
Exhaust Choice followup.
-
Martyn Smith
14:20:06 12/04/01
(0)
Mystery Wheel Picture.
-
Carlie Bentley
13:48:17 12/04/01
(8)
Re: Mystery Wheel Picture.
-
Ryan Bryan
22:18:38 12/04/01
(2)
Re: Mystery Wheel Picture.
-
Ryan Bryan
22:21:38 12/04/01
(1)
Re: Mystery Wheel Picture.
-
Carlie Bentley
05:01:22 12/05/01
(0)
Re: Mystery Wheel Picture.
-
Frank H
19:52:58 12/04/01
(1)
I thought so too.
-
Carlie Bentley
05:03:42 12/05/01
(0)
Re: Mystery Wheel Picture.
-
Troy Rudolph
15:42:21 12/04/01
(0)
Got one!!
-
TCD
14:08:27 12/04/01
(1)
Looks like the critter.
-
Carlie Bentley
14:24:33 12/04/01
(0)
Seat Sag
-
Mark80528i
12:46:10 12/04/01
(2)
Re: Seat Sag
-
Robert Bondi
18:43:22 12/04/01
(0)
Re: Seat Sag
-
Mishast
13:23:08 12/04/01
(0)
BMW 507 on Ebay
-
Adam Wilson
10:47:06 12/04/01
(4)
Saving those images
-
Erich M_SCAL81/633
14:47:11 12/04/01
(0)
Man that sure would buy a lot of e12s.
-
Carlie Bentley
14:05:24 12/04/01
(0)
OUCH! dont have that much Cash! eom
-
Scott
12:26:12 12/04/01
(0)
Re: BMW 507 on Ebay
-
Mark80528i
12:23:43 12/04/01
(0)
Found this on E-Bay
-
Lars PNW
10:16:36 12/04/01
(1)
Some people have waayyy to much time (nt)
-
Erich M_SCAL81/633
14:28:09 12/04/01
(0)
vintage Recaro seat on ebay, in UK though
-
Adam Wilson
09:53:26 12/04/01
(1)
Re: vintage Recaro seat on ebay, in UK though
-
Carlie Bentley
13:56:31 12/04/01
(0)
E12 in Bimmer mag???
-
Robert Bondi
03:22:15 12/04/01
(6)
Re: E12 in Bimmer mag???
-
Eric
19:45:36 12/04/01
(1)
Re: E12 in Bimmer mag???
-
Frank H
20:00:59 12/04/01
(0)
Re: E12 in Bimmer mag???
-
Adam Wilson
11:40:17 12/04/01
(2)
Re: E12 in Bimmer mag???
-
Robert Bondi
15:38:06 12/04/01
(1)
Re: E12 in Bimmer mag???
-
Adam Wilson
16:08:27 12/04/01
(0)
Re: E12 in Bimmer mag???
-
Lee Wareham
11:18:11 12/04/01
(0)
Heat shields
-
T. Han
23:58:21 12/03/01
(2)
Re: Heat shields
-
robert bondi
00:49:03 12/04/01
(1)
Re: Heat shields
-
T.Han
09:26:03 12/04/01
(0)
Injectors
-
T. Han
23:52:47 12/03/01
(0)
A steal for only $12, 900!
-
Luke
22:59:17 12/03/01
(9)
Re: A steal for only $12, 900!
-
Randy McCafferty
08:17:31 12/04/01
(3)
Re: A steal for only $12, 900!
-
Mark
08:46:29 12/04/01
(2)
Mark, you have not seen Robert Bondi's..
-
Scott
09:20:19 12/04/01
(1)
Re: Mark, you have not seen Robert Bondi's..
-
Mark
19:05:42 12/04/01
(0)
Re: A steal for only $12, 900!
-
Eric
23:51:36 12/03/01
(4)
Re: A steal for only $12, 900!
-
Carlie Bentley
05:53:54 12/04/01
(3)
Re: A steal for only $12, 900!
-
Mark
06:23:46 12/04/01
(2)
Can you post a photo, or link to yours...curious
-
Dean
10:18:30 12/04/01
(1)
Re: Can you post a photo, or link to yours...curious
-
Mark
18:56:06 12/04/01
(0)
Paging Wietse
-
Don Daynes
21:54:56 12/03/01
(3)
No ISP-AT&T should be ashamed of themselves.
-
Wietse
11:47:19 12/04/01
(2)
Re: No ISP-AT&T should be ashamed of themselves.
-
Troy Rudolph
17:14:23 12/04/01
(0)
Feeling the pain!
-
Sam R.
12:08:19 12/04/01
(0)
e12 front wheel hubs
-
Robert Holly
21:14:15 12/03/01
(3)
Re: e12 front wheel hubs
-
stewart
00:33:51 12/04/01
(1)
Re: e12 front wheel hubs
-
Robert Holly
17:17:00 12/04/01
(0)
Re: e12 front wheel hubs
-
Peter Florance
21:36:00 12/03/01
(0)
Curios about a "blue printed oil pump"??
-
Scott
20:54:13 12/03/01
(0)
ok,ok, evrybody calm down..wheew, close one(O.T.)
-
Scott
18:07:58 12/03/01
(0)
Fuel Pressure.... Leaking Injectors....
-
Kaveman
16:49:31 12/03/01
(6)
Re: Fuel Pressure.... Leaking Injectors....
-
...tom
19:03:04 12/03/01
(4)
Re: Fuel Pressure.... Leaking Injectors....
-
Johnathan Ryder
05:16:00 12/04/01
(1)
Re: Fuel Pressure.... Leaking Injectors....
-
Peter Florance
06:05:16 12/04/01
(0)
Re: Fuel Pressure.... Leaking Injectors....
-
Kaveman
20:14:04 12/03/01
(0)
Re: Fuel Pressure.... Leaking Injectors....
-
Peter Florance
19:22:40 12/03/01
(0)
Re: Fuel Pressure.... Leaking Injectors....
-
Peter Florance
18:14:55 12/03/01
(0)
valve adjustment
-
matt
16:39:06 12/03/01
(4)
Good Advice from Friends
-
John in Simi Valley - 528i, 535i, 633CSi, 528e, .
22:29:59 12/03/01
(1)
Re: Good Advice from Friends
-
John Again
22:32:46 12/03/01
(0)
Re: valve adjustment
-
Scott
17:39:56 12/03/01
(1)
Re: valve adjustment
-
Sam Schultz
18:03:41 12/03/01
(0)
Removing instrument cluster
-
Lee Wareham
14:53:14 12/03/01
(4)
Re: Removing instrument cluster
-
Lee Wareham
11:12:50 12/04/01
(0)
Re: Removing instrument cluster
-
John in Simi Valley - e12, e24, e28
23:12:24 12/03/01
(0)
Re: Removing instrument cluster
-
Randy McCafferty
17:29:18 12/03/01
(1)
Re: Removing instrument cluster
-
T. Han
23:38:19 12/03/01
(0)
newbie needs purchase advice . . .(long)
-
Drew Zacharda
14:20:02 12/03/01
(5)
You're an E12er in E28 clothes
-
John in Simi Valley - 528i, 535i, 633CSi, 528e, .
22:11:27 12/03/01
(0)
Re: newbie needs purchase advice . . .(long)
-
Jim Davis
16:46:45 12/03/01
(0)
Re: newbie needs purchase advice . . .(long)
-
Chuck Denson
15:06:11 12/03/01
(2)
Re: newbie needs purchase advice . . .(long)
-
Eric
15:34:39 12/03/01
(1)
1980-81 best years of the lot.
-
Lars PNW 81_528i
18:24:00 12/03/01
(0)
Another Brake question....
-
Scott
13:48:17 12/03/01
(6)
E 28's have single piston floating calipers
-
Peter Claassen
19:08:23 12/03/01
(2)
Peter, Is That a common prob among our cars??
-
Scott
20:34:10 12/03/01
(1)
Re: Peter, Is That a common prob among our cars??
-
Peter Florance
12:48:40 12/04/01
(0)
Re: Another Brake question....
-
Carlie Bentley
14:05:46 12/03/01
(2)
Re: Another Brake question....
-
Peter Florance
21:46:57 12/03/01
(0)
Of course, who wouldnt???.....:)
-
scott
14:07:58 12/03/01
(0)
Lord of the rings... (a little off topic?)
-
Frank H
11:14:27 12/03/01
(3)
Re: Lord of the rings... (a little off topic?)
-
T. Han
00:10:21 12/04/01
(0)
Re: Lord of the rings... (a little off topic?)
-
Jim Hineline
22:28:04 12/03/01
(0)
oh, boy, you found another thing that fires me up
-
Adam Wilson
12:20:14 12/03/01
(0)
79 528i Catalytic Converter
-
Jimi
09:55:00 12/03/01
(1)
Re: 79 528i Catalytic Converter
-
Jim Davis
17:35:06 12/03/01
(0)
Vibration
-
Steve Chandler
07:55:44 12/03/01
(4)
Re: Vibration, discribe the sounds
-
Sam Schultz
10:55:21 12/03/01
(3)
Re: Vibration, discribe the sounds
-
Steve Chandler
12:00:33 12/03/01
(2)
Re: Vibration, discribe the sounds
-
Sam R.
15:14:28 12/03/01
(1)
Found the problem...
-
Steve Chadler
22:19:16 12/03/01
(0)
Dash Lights Short-Out
-
Mr. Coffey
02:20:47 12/03/01
(7)
Re: Dash Lights Short-Out
-
Don Daynes
21:49:17 12/03/01
(3)
Re: Dash Lights Short-Out
-
Mr. Coffey
23:40:08 12/03/01
(1)
Re: Dash Lights Short-Out
-
Don Daynes
00:30:49 12/04/01
(0)
couple of other spots to check
-
Peter Florance
21:57:50 12/03/01
(0)
Re: Dash Lights Short-Out
-
Derek
09:55:05 12/03/01
(2)
Re: Dash Lights Short-Out
-
Mr. Coffey
19:34:18 12/03/01
(1)
Re: Dash Lights Short-Out
-
Peter Florance
21:55:54 12/03/01
(0)
Need Front Struts for 77 - 530I
-
Jim Hartwell
00:12:18 12/03/01
(10)
Re: Need Front Struts for 77 - 530I
-
Jim Hartwell
20:41:44 12/03/01
(0)
Re: Ebay Front Struts for 78 - 530I
-
ScottJ
19:25:06 12/03/01
(0)
Re: Need Front Struts for 77 - 530I
-
Troy Rudolph
11:33:28 12/03/01
(0)
shocks
-
Sam Schultz
10:53:27 12/03/01
(0)
I got a set of BOGE struts, the OEM part
-
Martyn Smith
08:52:10 12/03/01
(0)
Re: Need Front Struts for 77 - 530I
-
Bernie Aguilar
08:25:49 12/03/01
(0)
Re: Need Front Struts for 77 - 530I
-
Peter Florance
05:42:33 12/03/01
(0)
Strut Insert? Re: Need Front Struts for 77 - 530I
-
James
03:56:22 12/03/01
(0)
Re: Need Front Struts for 77 - 530I
-
stewart
00:49:17 12/03/01
(1)
Re: Need Front Struts for 77 - 530I
-
Jim Hartwell
19:52:46 12/03/01
(0)
Wietse!!! Scott Mcgehee!!!...wheel question???
-
Ryan bryan
22:22:24 12/02/01
(3)
Re: Wietse!!! Scott Mcgehee!!!...wheel question???
-
Wietse
11:52:52 12/04/01
(0)
Re: Wietse!!! Scott Mcgehee!!!...wheel question???
-
Eric
23:58:07 12/02/01
(0)
Re: Wietse!!! Scott Mcgehee!!!...wheel question???
-
T.Han
22:55:06 12/02/01
(0)
Ahhhhh....
-
Dave Spencer
21:53:18 12/02/01
(0)
Another rant... (and WOBW - sorry)
-
Dave Spencer
21:47:33 12/02/01
(20)
Re: Another rant... (and WOBW - sorry)
-
Nick
22:57:12 12/04/01
(0)
Buy a Macintosh...
-
Randy McCafferty
15:01:46 12/03/01
(11)
Re: Buy a Macintosh...
-
Frank H
15:45:42 12/03/01
(10)
not defending Gates...but
-
Adam Wilson
16:35:35 12/03/01
(5)
I saw a commercial that made me smile...
-
Peter Florance
17:09:39 12/03/01
(4)
Re: I saw a commercial that made me smile...
-
Frank H
18:50:15 12/03/01
(0)
Beta testing...
-
Dave Spencer
18:31:49 12/03/01
(2)
Re: Beta testing...
-
Frank H
18:39:11 12/03/01
(1)
window resources
-
Peter Florance
20:54:19 12/03/01
(0)
Agree completely
-
Randy McCafferty
16:31:03 12/03/01
(3)
Re: Agree completely
-
Bernie Aguilar
21:40:55 12/03/01
(2)
Antique Mac!
-
Randy McCafferty
08:05:33 12/04/01
(1)
Ya know....
-
Dave Spencer
00:20:41 12/05/01
(0)
I feel your pain.
-
Carlie Bentley
13:42:31 12/03/01
(0)
Dual Boot.... Linux and Winslow from MS
-
Lars PNW 77/81 528i
09:59:51 12/03/01
(0)
Re: Another rant... (and WOBW - sorry)
-
T. Han
23:11:33 12/02/01
(4)
Re: Another rant... (and WOBW - sorry)
-
Dave Spencer
23:29:06 12/02/01
(3)
Re: Another rant... (and WOBW - sorry)
-
T. Han
09:43:37 12/03/01
(2)
Re: Another rant... (and WOBW - sorry)
-
Randy McCafferty
15:06:09 12/03/01
(1)
Re: Another rant... (and WOBW - sorry)
-
Dennis
20:24:50 12/03/01
(0)
NASCAR vs. Speedvision (a long rant)...
-
Dave Spencer
21:25:03 12/02/01
(4)
Re: NASCAR vs. Speedvision (a long rant)...
-
Jim Hartwell
23:39:32 12/02/01
(2)
!!!!!!!
-
Dave Spencer
01:25:09 12/03/01
(1)
Re: !!!!!!!
-
Jim Hartwell
21:10:55 12/03/01
(0)
Disclaimer
-
Dave Spencer
21:54:53 12/02/01
(0)
Not Alpina B2, but still weird wheels.
-
Carlie Bentley
21:04:23 12/02/01
(2)
Re: Not Alpina B2, but still weird wheels.
-
James
02:29:16 12/03/01
(0)
Re: Not Alpina B2, but still weird wheels.
-
Sam Schultz
22:34:05 12/02/01
(0)
CHEAP: Uncracked Dash, Blue Front and Rear Seats
-
Chris
20:54:52 12/02/01
(1)
Check your email (eom)
-
Dave Spencer
21:49:15 12/02/01
(0)
Salt on Oregon Highways, Now that Snow Flies...
-
Lars PNW 77/81 528i
18:35:02 12/02/01
(3)
Re: Salt on Oregon Highways, Now that Snow Flies...
-
T. Han
21:10:14 12/02/01
(2)
Re: Salt on Oregon Highways, Now that Snow Flies...
-
jefflee
20:23:21 12/03/01
(1)
Only know hot oil treatment keeps me non-rusty!
-
Lars PNW 77-81 528i
23:46:25 12/03/01
(0)
WTB: Turn signal lenses
-
Chuck Denson
18:23:49 12/02/01
(0)
Who has Mahle BBS wheels?
-
Luke
17:49:09 12/02/01
(29)
I have 5 Mahle BBS wheels!
-
John in Simi Valley - e12, e24, e28
22:58:37 12/03/01
(0)
Re: Who has Mahle BBS wheels?
-
adam
11:20:31 12/03/01
(0)
Re: Who has Mahle BBS wheels?
-
Frank H
10:50:38 12/03/01
(1)
Re: Who has Mahle BBS wheels?
-
Luke
10:55:56 12/03/01
(0)
Att: Luke I have Mahle BBS wheels
-
Jeff
01:27:39 12/03/01
(3)
Re: Att: Luke I have Mahle BBS wheels
-
Luke
01:38:16 12/03/01
(2)
If he doesn't take you up on that, I will!
-
Martyn Smith
08:43:55 12/03/01
(1)
But I've got dibs!
-
Luke
09:04:22 12/03/01
(0)
Re: Mahle BBS wheels found
-
Scott
21:22:40 12/02/01
(3)
Not the right ones, but close...
-
Luke
21:54:51 12/02/01
(1)
Forgot the link, here it is...
-
Luke
22:03:59 12/02/01
(0)
Re: Mahle BBS wheels found
-
Luke
21:47:38 12/02/01
(0)
Re: Who has Mahle BBS wheels?
-
Jim Hineline
20:50:42 12/02/01
(1)
Re: Who has Mahle BBS wheels?
-
Luke
20:54:45 12/02/01
(0)
These are the correct ones.
-
Carlie Bentley
20:40:17 12/02/01
(3)
Those are the wheels I have! But....
-
Tara Knowles
13:58:39 12/03/01
(1)
Re: Those are the wheels I have! But....
-
Luke
20:41:18 12/03/01
(0)
And I want them!
-
Luke
20:43:50 12/02/01
(0)
Look at these on Peters car...
-
Carlie Bentley
20:29:49 12/02/01
(1)
14x7 BBS (don't have any more)
-
Peter Florance
20:34:13 12/02/01
(0)
Re: Who has Mahle BBS wheels?
-
Carlie Bentley
20:01:22 12/02/01
(3)
Nice page webpage!
-
Luke
20:13:36 12/02/01
(1)
Thanks
-
Carlie Bentley
20:31:19 12/02/01
(0)
No mahle markings.
-
Carlie Bentley
20:11:56 12/02/01
(0)
Are you talking about the gold center 14x7 options
-
Lars PNW 81_528i
18:23:54 12/02/01
(1)
Re: Are you talking about the gold center 14x7 options
-
Luke
19:32:19 12/02/01
(0)
Extra glove box hinge who wants it???
-
Scott
16:09:26 12/02/01
(2)
Re: Extra glove box hinge who wants it???
-
Chuck Denson
18:12:29 12/02/01
(1)
gone to chuck! Thanks everybody! eom
-
scott
19:55:55 12/02/01
(0)
Open Sunroof and RAIN do not mix
-
Garry
15:37:37 12/02/01
(0)
Rebuilt Bilsteins
-
Gene S
15:13:25 12/02/01
(1)
Re: Rebuilt Bilsteins
-
Jefflee
18:41:22 12/02/01
(0)
ALAS
-
Dennis
14:47:31 12/02/01
(2)
Re: ALAS
-
Peter Florance
18:01:38 12/02/01
(0)
Do you want me to grab one next Sat?
-
Scott
16:04:35 12/02/01
(0)
Front wheel hub nut torque?
-
Erich M_SCAL81/633
12:58:14 12/02/01
(4)
30-33Nm = 22-24lbft
-
James
13:49:56 12/02/01
(0)
careful!!!
-
Peter Florance
13:46:54 12/02/01
(2)
Live and learn
-
Erich M_SCAL81/633
18:01:38 12/02/01
(1)
Re: Live and learn
-
Peter Florance
18:25:30 12/02/01
(0)
Free 528i
-
Jason
00:55:31 12/02/01
(12)
Master Luke is right
-
John in Simi Valley - e12, e24, e28
23:29:04 12/03/01
(0)
Re: Free 528i
-
Jason
17:37:50 12/02/01
(1)
Correction on the "No Salt In Oregon" YES!
-
Lars PNW 81_528i
18:31:45 12/02/01
(0)
Re: Free 528i
-
Chuck Denson
07:44:44 12/02/01
(0)
Re: Free 528i...TEASE!! (nt)
-
john in NH
01:28:22 12/02/01
(0)
Re: Free 528i
-
Luke
01:13:33 12/02/01
(6)
Re: Free 528i
-
Mark
05:07:07 12/02/01
(5)
Correction
-
Mark
05:45:31 12/02/01
(4)
Re: Correction to Correction
-
Eric
17:26:06 12/02/01
(3)
Re: Correction to Correction
-
Mark
20:24:21 12/02/01
(2)
from all I've read, '79's were 4 speed (eom)
-
FLIP
09:49:38 12/03/01
(1)
Re: from all I've read, '79's were 4 speed (eom)
-
Mark
04:39:12 12/05/01
(0)
I'll trade my '74 '02 for your 80's 528i
-
John in NH
23:13:28 12/01/01
(0)
I Know It's Not an E-12, but, , , ,
-
Jefflee
22:47:34 12/01/01
(0)
Some wheel options.
-
Carlie Bentley
20:00:59 12/01/01
(0)
Sweet 530I in Junkyard, great shape...
-
Scott
17:33:04 12/01/01
(10)
Re: Sweet 530I in Junkyard, great shape...
-
Randy
21:35:44 12/01/01
(4)
Sorry Randy----004...what is the diff??
-
Scott
16:03:03 12/02/01
(2)
Re: Sorry Randy----004...what is the diff??
-
Mark
21:10:09 12/02/01
(0)
004 should work fine
-
Peter Florance
17:26:49 12/02/01
(0)
Probably $5 or $10 bucks....
-
Scott
10:21:31 12/02/01
(0)
Re: Sweet 530I in Junkyard, great shape...
-
Dennis
20:12:15 12/01/01
(1)
Re: Sweet 530I in Junkyard, great shape...
-
Scott
10:01:43 12/02/01
(0)
Re: Sweet 530I in Junkyard, great shape...
-
Chuck Denson
18:31:43 12/01/01
(2)
Beecuz
-
Lars PNW 77, 81, 81 E12z
19:16:23 12/01/01
(1)
Re: Beecuz
-
Chuck Denson
07:52:45 12/02/01
(0)
Heated O2 sensor update :-|
-
Peter Florance
17:25:15 12/01/01
(4)
Heated sensor question.
-
Carlie Bentley
20:25:06 12/02/01
(1)
Re: Heated sensor question.
-
Peter Florance
05:44:17 12/03/01
(0)
Re: Heated O2 sensor update :-|
-
Kaveman
14:01:52 12/02/01
(1)
Re: Heated O2 sensor update :-|
-
Peter Florance
15:12:12 12/02/01
(0)
TARGETED EMAIL ADVERTISING IS THE KEY -140,000,000
-
Derik
16:40:47 12/01/01
(2)
TARGETING PEOPLE WHO SPAM B. BOARDS IS THE KEY!!!!
-
Chad
12:19:04 12/02/01
(0)
please leave this up until nac.net takes action
-
Peter Florance
17:32:22 12/01/01
(0)
TARGETED EMAIL ADVERTISING IS THE KEY -140,000,000
-
Derik
16:40:38 12/01/01
(0)
TARGETED EMAIL ADVERTISING IS THE KEY -140,000,000
-
Derik
16:40:32 12/01/01
(1)
PUUUUUUNNNNKKKK!!!!!!!
-
Scott
17:23:53 12/01/01
(0)
Single wiper conversion?
-
Carlie
08:31:38 12/01/01
(2)
Re: Single wiper conversion?
-
Troy Rudolph
17:52:31 12/01/01
(1)
Thanks
-
Carlie Bentley
20:01:59 12/01/01
(0)
Who edited the WRC Video?
-
Carlie Bentley
07:59:33 12/01/01
(1)
Re: Who edited the WRC Video?
-
Scott
17:25:58 12/01/01
(0)
E12 auctioned on Ebay
-
Luke
15:18:56 11/30/01
(3)
Re: E12 auctioned on Ebay
-
Jim Race
16:28:08 12/01/01
(1)
Looks like you got it!
-
Erich M_SCAL81/633
14:52:43 12/04/01
(0)
And another one!
-
Luke
15:29:05 11/30/01
(0)
L-Jet Fluctuating Idle Solved
-
Erich M_SCAL81/633
14:34:13 11/30/01
(1)
Re: L-Jet Fluctuating Idle Solved
-
Peter Florance
09:21:08 12/01/01
(0)
Not ONE E12 in Sight!....
-
Kaveman
14:28:18 11/30/01
(11)
Re: Not ONE E12 in Sight!....
-
Zane
07:41:44 12/01/01
(0)
Re: Not ONE E12 in Sight!....
-
Jim
21:10:10 11/30/01
(0)
That's because there were only 2 and I bought 'em
-
Jim Davis
16:26:49 11/30/01
(0)
Re: Not ONE E12 in Sight!....
-
Adam Wilson
15:06:24 11/30/01
(7)
Chicago E12 SpringFest
-
Luke
15:17:31 11/30/01
(6)
Luke, when are you going to be up here?
-
Adam Wilson
16:11:04 11/30/01
(2)
Re: Luke, when are you going to be up here?
-
Luke
16:19:52 11/30/01
(1)
Re: Luke, when are you going to be up here?
-
Adam Wilson
16:46:01 11/30/01
(0)
Where to in Europe?
-
Dean
16:10:46 11/30/01
(2)
Re: Where to in Europe?
-
Luke
16:21:43 11/30/01
(1)
Enjoy...
-
Dave Spencer
20:53:22 12/02/01
(0)
Yee Haw!! The difference 7 rich AFM clicks makes!
-
Jim Ockner
11:31:01 11/30/01
(2)
Re: Yee Haw!! The difference 7 rich AFM clicks makes!
-
Bill Bowes
20:45:22 12/01/01
(0)
Pictures
-
Troy Rudolph
12:00:01 11/30/01
(0)
Thanks, Jim Davis
-
Jim Ockner
11:10:17 11/30/01
(1)
You're welcome. Glad to help! (eom)
-
Jim Davis
12:58:38 11/30/01
(0)
320i runners...30 Bucks each?
-
Steve Chandler
10:50:45 11/30/01
(4)
Re: 320i runners...30 Bucks each?
-
Steve Chandler
10:52:05 11/30/01
(3)
Robert Bondi has some left over cheap..
-
Scott
11:23:30 11/30/01
(2)
Re: Robert Bondi has some left over cheap..
-
Steve Chandler
08:15:55 12/01/01
(0)
Re: Robert Bondi has some left over cheap..
-
Patrick
11:43:13 11/30/01
(0)
Just wanted to say thanks for the info
-
Jim
10:04:59 11/30/01
(0)
wheel fitment
-
stewart
07:14:05 11/30/01
(1)
Quality of Questions
-
Troy Rudolph
12:04:26 11/30/01
(0)
about the AFM
-
Dennis
03:12:51 11/30/01
(7)
Re: about the AFM
-
Peter Florance
05:49:12 11/30/01
(4)
Re: about the AFM
-
Randy
00:59:41 12/01/01
(1)
Re: about the AFM
-
Peter Florance
08:26:23 12/01/01
(0)
Re: about the AFM
-
Farokh
17:21:37 11/30/01
(1)
Re: about the AFM
-
Peter Florance
21:41:25 11/30/01
(0)
Re: about the AFM
-
Robert Bondi
03:51:45 11/30/01
(1)
ALMOST, but no cigar
-
Dennis
20:24:35 12/01/01
(0)
Not e12 related but Important...Nascar is taking..
-
Scott
22:25:39 11/29/01
(14)
Re: Nascar is king..
-
Bill Bowes
21:15:03 12/01/01
(1)
Re: Nascar is king..
-
Kaveman
21:25:02 12/01/01
(0)
Re: Not e12 related but Important...Nascar is taking..
-
Mark
09:44:33 11/30/01
(11)
boring....
-
Adam Wilson
10:08:29 11/30/01
(10)
Re: boring....
-
T. Han
14:13:36 11/30/01
(1)
not grouchy, just snobby about auto racing (eom)
-
Adam Wilson
15:07:27 11/30/01
(0)
ahhh, push rods or cam overs, long live the debate
-
Carlie Bentley
12:18:58 11/30/01
(6)
Re: ahhh, push rods or cam overs, long live the debate
-
Troy Rudolph
14:04:34 11/30/01
(2)
hmmm, Buick?
-
Carlie Bentley
14:41:31 11/30/01
(1)
Re: hmmm, Buick?
-
Troy Rudolph
21:06:07 11/30/01
(0)
No argument from me but..
-
Scott
13:41:14 11/30/01
(2)
Re: No argument from me but..
-
Troy Rudolph
14:10:41 11/30/01
(1)
Yeah boy, those were the days..
-
Scott
15:36:31 11/30/01
(0)
Re: boring....
-
Mark
10:43:32 11/30/01
(0)
Damn water! Where is it coming from?
-
Luke
21:38:09 11/29/01
(5)
Re: Damn water! Where is it coming from?
-
Jeff C
08:35:27 11/30/01
(0)
Re: Damn water! Where is it coming from?
-
mikey
22:44:33 11/29/01
(3)
Re: Damn water! Where is it coming from?
-
T. Han
01:44:53 11/30/01
(2)
Re: Damn water! Where is it coming from?
-
mikey
18:12:03 11/30/01
(0)
It gets in where the door brace meets the B post.
-
James
10:01:25 11/30/01
(0)
signal lights
-
Jbelton
21:34:51 11/29/01
(4)
Re: signal lights
-
Peter Florance
06:27:16 11/30/01
(1)
Re: signal lights
-
Art Blavis
20:43:51 11/30/01
(0)
Re: signal lights
-
Sam Schutlz
22:16:31 11/29/01
(1)
Re: signal lights
-
Jbelton
21:12:27 11/30/01
(0)
Looking for used, fan blower + fuel sending unit
-
Mishast
21:25:34 11/29/01
(2)
Re: Looking for used, fan blower + fuel sending unit
-
Randy
01:04:18 12/01/01
(1)
Re: Looking for used, fan blower + fuel sending unit
-
Mishast
12:26:02 12/03/01
(0)
How much can safely be planed off an M30 Head?
-
Bill Barrett
21:06:35 11/29/01
(1)
min head height is 129mm
-
James
10:05:11 11/30/01
(0)
FS: 3.64LSD and 3.07LSD $425 each
-
TCD
20:54:09 11/29/01
(0)
FS: BMW 530i Factory Shop Manual in English $85
-
TCD
20:44:20 11/29/01
(0)
tire sizes that will fit?
-
Chad Oetjen
19:32:38 11/29/01
(5)
Re: tire sizes that will fit?
-
Eric
20:39:27 11/29/01
(0)
What is the offset of those wheels?
-
Troy Rudolph
19:51:10 11/29/01
(3)
Re: What is the offset of those wheels?
-
Chad Oetjen
20:07:13 11/29/01
(2)
Re: What is the offset of those wheels?
-
Luke
21:30:30 11/29/01
(1)
Re: What is the offset of those wheels?
-
Mark
22:18:10 11/29/01
(0)
heated O2 sensor install this weekend (long)
-
Peter Florance
17:07:31 11/29/01
(7)
Re: heated O2 sensor install this weekend (long)
-
Jim Davis
10:13:18 11/30/01
(1)
Re: heated O2 sensor install this weekend (long)
-
Peter Florance
11:43:00 11/30/01
(0)
Re: heated O2 sensor install this weekend (long)
-
Mark80528i
07:56:59 11/30/01
(2)
Re: heated O2 sensor install this weekend (long)
-
Don Daynes
10:59:33 11/30/01
(0)
Re: heated O2 sensor install this weekend (long)
-
Peter Florance
08:33:24 11/30/01
(0)
I'm defineitely interested in the results on this.
-
Jim Ockner
18:20:15 11/29/01
(1)
Re: I'm defineitely interested in the results on this.
-
Peter Florance
19:11:30 11/29/01
(0)
FS: Hartge Aluminum front strut bar $125
-
TCD
16:45:15 11/29/01
(3)
Sold, thanks Peter.
-
TCD
18:35:50 11/29/01
(0)
Re: FS: Hartge Aluminum front strut bar $125
-
Peter Florance
17:08:27 11/29/01
(1)
Re: FS: Hartge Aluminum front strut bar $125
-
TCD
17:23:09 11/29/01
(0)
AFM Adjustment - Peter Florence
-
Jim Ockner
16:35:09 11/29/01
(8)
Re: AFM Adjustment - Peter Florence
-
Peter Florance
16:53:31 11/29/01
(4)
No jumpers - already checked that
-
Jim Ockner
17:55:19 11/29/01
(0)
Question for Peter F.
-
Scott
17:00:03 11/29/01
(2)
Re: Question for Peter F.
-
Peter Florance
17:10:08 11/29/01
(1)
Thanks...(eom)
-
Scott
17:13:09 11/29/01
(0)
Re: AFM Adjustment - Peter Florence
-
Jim Davis
16:50:23 11/29/01
(2)
AFM - Jim Davis
-
Jim Ockner
18:05:48 11/29/01
(1)
Re: AFM - Jim Davis
-
Jim Davis
10:09:05 11/30/01
(0)
New exhaust setup question.
-
Martyn Smith
16:09:52 11/29/01
(5)
Re: New exhaust setup question.
-
fred
21:17:26 11/30/01
(0)
Re: New exhaust setup question.
-
Steve Chandler
23:06:40 11/29/01
(0)
Re: New exhaust setup question.
-
Jim Ockner
17:50:14 11/29/01
(0)
I used the fly-by-night...
-
Dave Spencer
17:07:47 11/29/01
(0)
Re: New exhaust setup question.
-
Scott
16:28:23 11/29/01
(0)
Brake question..
-
Scott
14:47:18 11/29/01
(6)
Re: Brake question..
-
Peter Claassen
10:59:40 12/01/01
(0)
Re: Brake question..
-
Farokh
17:03:51 11/29/01
(2)
did you like the Ferodos?
-
Peter Florance
17:09:20 11/29/01
(1)
Re: did you like the Ferodos?
-
Farokh
19:53:51 11/29/01
(0)
Re: Brake question..
-
Peter Florance
15:03:04 11/29/01
(1)
Thanks Peter! (eom)
-
Scott
15:32:12 11/29/01
(0)
I found a new MOTOR!! It's a ..
-
Scott
13:28:26 11/29/01
(0)
Downshifting bad?
-
Steve Chandler
11:19:26 11/29/01
(5)
Re: Downshifting bad?
-
Luke
13:44:18 11/29/01
(0)
Not to be SA, but which costs more? Engine/brakes?
-
Lars PNW
12:32:53 11/29/01
(0)
Re: Downshifting bad?
-
Adam Wilson
12:31:24 11/29/01
(0)
Re: Downshifting bad?
-
Sam Schultz
11:22:53 11/29/01
(1)
Re: Downshifting bad?(Longish)
-
Scott
13:11:52 11/29/01
(0)
OT: World Rally Challenge Video
-
Adam Wilson
10:39:38 11/29/01
(3)
I got yer back my brutha!!! check it out...
-
Scott
15:31:16 11/29/01
(0)
Looks like they caught on.
-
Carlie Bentley
14:38:59 11/29/01
(0)
Adam, your rock, thanks, Im a ...
-
Scott
13:18:38 11/29/01
(0)
conversion
-
ray
10:35:02 11/29/01
(2)
3.3. vs 3.5
-
Peter Claassen
11:12:15 12/01/01
(0)
See FAQ
-
Erich M_SCAL81/633
15:07:31 11/30/01
(0)
any need a good 3.5 l on the east coast?
-
...tom
04:36:48 11/29/01
(4)
TOM! check my post a little farther down youll...
-
Scott
13:20:46 11/29/01
(0)
Re: any need a good 3.5 l on the east coast?
-
raymon
10:32:56 11/29/01
(0)
What year is it? Euro or American eom
-
Jeff C
08:29:18 11/29/01
(1)
1985, us-spec, can hear run and drive EOM
-
...tom
08:41:38 11/29/01
(0)
starting point
-
Dennis
03:03:47 11/29/01
(1)
Re: starting point
-
Peter Florance
07:17:08 11/29/01
(0)
Transmission Mounts / Crossmember
-
Troy Rudolph
22:26:29 11/28/01
(2)
Re: Transmission Mounts / Crossmember
-
Don Daynes
00:03:40 11/29/01
(1)
Re: Transmission Mounts / Crossmember
-
Troy Rudolph
08:09:10 11/29/01
(0)
Tranny leak
-
Corey Rodgers
21:48:55 11/28/01
(1)
Re: Tranny leak
-
James
06:07:21 11/29/01
(0)
need 2 front fenders
-
adam
16:19:32 11/28/01
(1)
Re: need 2 front fenders
-
Troy Rudolph
16:50:25 11/28/01
(0)
first snow of the season...
-
Frank H
16:09:33 11/28/01
(2)
Snow?
-
Eric
19:42:16 11/28/01
(0)
Re: first snow of the season...
-
Adam Wilson
16:56:09 11/28/01
(0)
No Respect
-
Dean
15:40:17 11/28/01
(6)
I replied to the guy with my thoughts (eom)
-
Adam Wilson
16:52:48 11/29/01
(0)
Re: No Respect
-
Jim Davis
10:49:53 11/29/01
(0)
You Rock!
-
Sam R.
23:29:23 11/28/01
(0)
Couldn't have said it better...
-
Dave Spencer
17:56:40 11/28/01
(0)
Re: No Respect
-
Peter Florance
17:48:57 11/28/01
(1)
Re: No Respect
-
Mark
22:57:29 11/28/01
(0)
parting '80 euro 528i (long)
-
...tom
15:29:49 11/28/01
(3)
Re: parting '80 euro 528i (long)
-
Gilbert S.
02:51:04 11/29/01
(0)
Re: parting '80 euro 528i (long)
-
T. Han
22:30:58 11/28/01
(1)
yep, that's the one
-
...tom
08:16:13 11/29/01
(0)
adjusting valves OUT of factory spec?
-
Adam Wilson
13:16:06 11/28/01
(3)
Re: adjusting valves OUT of factory spec?
-
Troy Rudolph
08:13:25 11/29/01
(1)
tell me about it....
-
Peter Florance
13:46:03 11/29/01
(0)
Re: adjusting valves OUT of factory spec?
-
Carlie Bentley
18:04:44 11/28/01
(0)
Fan clutch question
-
Bob
10:57:51 11/28/01
(4)
Re: Fan clutch question
-
Bob
19:00:39 11/28/01
(0)
Re: Fan clutch question
-
Carlie Bentley
18:14:03 11/28/01
(0)
Re: Fan clutch question
-
James
14:58:43 11/28/01
(0)
Re: Fan clutch question
-
Peter Florance
13:46:20 11/28/01
(0)
calling Mark Franklin of DeKalb, Illinois
-
Adam Wilson
10:54:11 11/28/01
(0)
520/6 clutch kit info found and veary interesting,
-
Sam Schultz
09:35:03 11/28/01
(0)
Throtle linkage question...
-
Ellis
01:37:05 11/28/01
(2)
Re: Throtle linkage question...
-
Peter Florance
06:43:50 11/28/01
(0)
Re: Throtle linkage question...
-
Robert Bondi
04:39:14 11/28/01
(0)
Looking for crankshaft
-
Sergey
01:23:34 11/28/01
(0)
Looking for crankshaft
-
Sergey
01:19:44 11/28/01
(2)
Re: Looking for crankshaft
-
Sergey
01:22:20 11/28/01
(1)
Try a dealer...This site is for early 5's
-
Steve
08:07:51 11/28/01
(0)
found a good wheel deal...lemme know what u think
-
Nick_1981_528i
23:58:12 11/27/01
(2)
Re: found a good wheel deal...lemme know what u think
-
Carlie Bentley
18:16:31 11/28/01
(0)
Re: found a good wheel deal...lemme know what u think
-
Sam Schultz
09:44:57 11/28/01
(0)
A/C
-
Lou
18:06:10 11/27/01
(1)
Change your post to"WTB A/C PARTS" and..
-
Scott
18:15:18 11/27/01
(0)
Tach's got me Ticked.
-
Corey Rodgers
16:42:30 11/27/01
(3)
Re: Tach's got me Ticked.
-
Corey Rodgers
23:09:56 11/27/01
(0)
Re: Tach's got me Ticked.
-
Randy McCafferty
21:33:58 11/27/01
(0)
Re: Tach's got me Ticked.
-
Scott
18:07:19 11/27/01
(0)
Gas Mileage, 2nd muffler and Auto Trannies=Good?
-
Nick_1981_528i
16:25:48 11/27/01
(10)
Automatic early shift solution. Possible FAQ
-
Carlie Bentley
18:32:39 11/28/01
(1)
i always suspected....
-
Nick_1981_528i
12:43:39 11/29/01
(0)
Re: Gas Mileage, 2nd muffler and Auto Trannies=Good?
-
Randy McCafferty
21:42:28 11/27/01
(0)
Re: Gas Mileage
-
Dave Spencer
17:41:19 11/27/01
(5)
Re: Gas Mileage
-
Nick_1981_528i
22:06:59 11/27/01
(4)
Not available yet, but....
-
Dave Spencer
09:48:55 11/29/01
(3)
Re: Not available yet, but....
-
Nick_1981_528i
12:36:58 11/29/01
(2)
$2k
-
Dave Spencer
13:59:27 11/29/01
(1)
worth it?
-
Nick_1981_528i
21:41:13 11/29/01
(0)
by the way.....
-
Nick_1981_528i
16:31:43 11/27/01
(0)
need Fuel pump and tank
-
adam
13:31:01 11/27/01
(4)
Re: need Fuel pump and tank
-
stewart
17:51:54 11/27/01
(0)
Re: need Fuel pump and tank
-
Troy Rudolph
15:08:36 11/27/01
(1)
Re: need Fuel pump and tank
-
Sam Schutlz
17:44:22 11/27/01
(0)
PS this means the car is no longer for sale
-
adam
14:31:57 11/27/01
(0)
325i vs 528i
-
raymon
11:48:27 11/27/01
(7)
Check bmwe30.net
-
David P
13:08:32 11/27/01
(1)
Here's the link
-
David P
13:09:26 11/27/01
(0)
Re: 325i vs 528i
-
Troy Rudolph
12:37:10 11/27/01
(4)
Re: One more link
-
Troy Rudolph
18:58:30 11/27/01
(0)
Re: 325i vs 528i
-
Troy Rudolph
12:55:28 11/27/01
(1)
Re: 325i vs 528i
-
Frank H
15:10:59 11/27/01
(0)
Re: Hartge H35 link
-
Troy Rudolph
12:54:52 11/27/01
(0)
79 528i - Is there cold enrichment?
-
Jim Ockner
10:58:56 11/27/01
(2)
Re: 79 528i - Is there cold enrichment?
-
Peter Florance
12:56:45 11/27/01
(0)
Answered my own 1st question but...
-
Jim Ockner
11:44:03 11/27/01
(0)
Bimper needed for a friend
-
David Simmons
09:18:41 11/27/01
(2)
Re: Bimper needed for a friend
-
adam
14:33:21 11/27/01
(0)
Re: Bimper needed for a friend
-
Sam Schultz
09:58:42 11/27/01
(0)
drivers side tail light/trailer hitch
-
Dale Beuning
02:27:32 11/27/01
(3)
Re: drivers side tail light
-
Jefflee
10:47:02 11/27/01
(0)
Re: drivers side tail light/trailer hitch
-
Steve Chandler
10:32:23 11/27/01
(0)
528i / M535i towhitch
-
James
07:51:14 11/27/01
(0)
Check this E12 KHL out!
-
Luke
23:21:02 11/26/01
(12)
KHL Info!
-
Troy Rudolph
18:45:31 11/27/01
(0)
Wait, let me wipe off the drool...
-
Carlie Bentley
14:45:27 11/27/01
(4)
No need to imagine, just go look at Zane's car
-
Adam Wilson
16:37:50 11/27/01
(0)
If only...
-
Carlie Bentley
18:17:09 11/27/01
(0)
Re: Wait, let me wipe off the drool...
-
Luke
14:52:02 11/27/01
(0)
exact link
-
Luke
23:22:27 11/26/01
(5)
Man, That is Bad! do you think....
-
Scott
08:40:26 11/27/01
(4)
Re: Man, That is Bad! do you think....
-
Luke
12:15:33 11/27/01
(3)
Re: Man, That is Bad! do you think....
-
Troy Rudolph
12:39:53 11/27/01
(2)
Re: Here's a link for a Hartge H35
-
Troy Rudolph
12:49:04 11/27/01
(0)
Re: Here's a link for a 333i
-
Troy Rudolph
12:42:56 11/27/01
(0)
Idle switch
-
T.Han
22:32:50 11/26/01
(4)
Re: Idle switch
-
Peter Florance
06:50:29 11/27/01
(3)
Re: Idle switch
-
T.Han
09:25:30 11/27/01
(1)
Re: Idle switch (reason)
-
Walt Barie
16:43:05 11/29/01
(0)
slowing down -- possibly...
-
Jeff C
09:18:39 11/27/01
(0)
Re. aux. air valve
-
Ellis
22:14:41 11/26/01
(16)
Re: Re. aux. air valve
-
Jim Ockner
00:13:49 11/27/01
(15)
Re: Re. aux. air valve
-
Peter Florance
06:52:11 11/27/01
(14)
Re: Re. aux. air valve
-
Ellis
08:01:52 11/27/01
(13)
Re: Re. aux. air valve
-
Peter Florance
08:56:00 11/27/01
(12)
high idle!
-
Robert Bondi
17:45:50 11/27/01
(0)
Re: Re. aux. air valve
-
Derek
13:15:20 11/27/01
(9)
Re: Re. aux. air valve
-
Jim Davis
17:06:19 11/28/01
(0)
Re: Re. aux. air valve
-
Peter Florance
06:45:50 11/28/01
(6)
Re: Re. aux. air valve
-
Derek
09:21:09 11/28/01
(5)
Re: Re. aux. air valve
-
Peter Florance
11:44:05 11/28/01
(4)
Re: Re. aux. air valve
-
Ellis
00:37:09 11/29/01
(3)
Re: Re. aux. air valve
-
Peter Florance
07:22:58 11/29/01
(2)
Re: Re. aux. air valve
-
Ellis
07:55:02 11/29/01
(1)
Re: Re. aux. air valve
-
Peter Florance
13:48:35 11/29/01
(0)
Re: Re. aux. air valve
-
Ellis
01:24:00 11/28/01
(0)
Re: Re. aux. air valve
-
Derek
13:15:03 11/27/01
(0)
Help! Clock stuck at 1:00
-
Luke
22:04:31 11/26/01
(5)
The perfect time (pun intended)
-
Carlie
18:40:45 11/28/01
(0)
Re: Help! Clock stuck at 1:00
-
Don Daynes
01:37:14 11/27/01
(1)
Re: Help! Clock stuck at 1:00
-
Luke
12:58:31 11/27/01
(0)
Re: Help! Clock stuck at 1:00
-
Steve Chandler
22:26:57 11/26/01
(1)
but my radio works...
-
Luke
23:16:35 11/26/01
(0)
Compare & Contrast (kinda e12 related)
-
Jeremy T
19:02:44 11/26/01
(4)
Re: Compare & Contrast (kinda e12 related)
-
Jeremy T
22:57:01 11/26/01
(0)
Re: Compare & Contrast (kinda e12 related)
-
T.Han
22:17:27 11/26/01
(0)
some wisdom....
-
Nick_1981_528i
22:16:52 11/26/01
(1)
Re: some wisdom....
-
Derek
14:07:25 11/27/01
(0)
spark plug question
-
JohnN
18:45:04 11/26/01
(1)
IMO...
-
Peter Florance
19:24:25 11/26/01
(0)
Spray-On Paint Film for Tail-Lights (again)
-
Jefflee
17:36:25 11/26/01
(1)
Oh man....not again! (nt)
-
Scott
20:44:38 11/26/01
(0)
Hwy 1 to Stinson Beach is an amazing drive.
-
Dean
16:38:27 11/26/01
(5)
Re: Hwy 1 to Stinson Beach is an amazing drive.
-
Sam R.
16:47:39 11/26/01
(4)
Re: Hwy 1 to Stinson Beach is an amazing drive.
-
Dave Spencer
14:28:20 11/27/01
(0)
Re: Hwy 1 to Stinson Beach is an amazing drive.
-
John B 528i
21:21:30 11/26/01
(2)
Thanks. Will do.
-
Dean
11:55:33 11/27/01
(1)
Re: Thanks. Will do.
-
Bob Iverach
12:33:13 11/27/01
(0)
Finding a motor made easy..no affil etc...
-
Scott
09:37:34 11/26/01
(1)
Re: Finding a motor made easy..no affil etc...
-
Chuck Denson
13:48:05 11/26/01
(0)
Did the 3.5L M30 make it to OZ?
-
Adam B
20:03:35 11/25/01
(7)
Thanks for the info guys. much appreciated (EOM)
-
Adam B
16:41:31 11/26/01
(0)
Re: Did the 3.5L M30 make it to OZ?
-
Jaycee
16:40:40 11/26/01
(1)
Re: Did the 3.5L M30 make it to OZ?
-
Mark
21:13:12 11/26/01
(0)
Re: Did the 3.5L M30 make it to OZ?
-
Peter Florance
20:23:28 11/25/01
(3)
Re: Did the 3.5L M30 make it to OZ?
-
Mark
04:05:38 11/26/01
(2)
Re: Did the 3.5L M30 make it to OZ?
-
Troy Rudolph
09:29:10 11/26/01
(1)
Re: Did the 3.5L M30 make it to OZ?
-
Mark
21:11:16 11/26/01
(0)
Auxilary Fan Questions..
-
Scott
16:09:44 11/25/01
(6)
My Thanks to Mark, Robert, and Peter!! (nt)
-
Scott
12:30:47 11/26/01
(0)
Re: Auxilary Fan Questions..
-
Robert Bondi
17:13:13 11/25/01
(3)
Robert can you get me a part #??
-
Scott
11:02:05 11/26/01
(1)
BMP part #s
-
Robert Bondi
17:37:08 11/26/01
(0)
Re: Auxilary Fan Questions..
-
Mark
08:35:34 11/26/01
(0)
Re: Auxilary Fan Questions..
-
Peter Florance
17:06:18 11/25/01
(0)
idle
-
Stephen Robison
12:38:57 11/25/01
(10)
Re: idle
-
Steve Chandler
23:10:34 11/25/01
(0)
Re: idle
-
Peter Florance
20:22:14 11/25/01
(2)
Re: idle
-
Stephen Robison
19:56:01 11/26/01
(1)
Re: idle
-
Peter Florance
21:26:37 11/26/01
(0)
AFM terminals 36 & 39
-
Robert Bondi
18:03:26 11/25/01
(0)
Re: idle
-
Peter Florance
13:18:48 11/25/01
(4)
Re: idle
-
T. Han
14:23:01 11/25/01
(1)
Re: idle
-
Steve Robison
17:39:20 11/25/01
(0)
Re: idle
-
Steve Robison
14:04:23 11/25/01
(1)
Re: idle
-
Michael Longeneker
15:31:32 11/25/01
(0)
Fluctuating idle solved
-
Erich M_SCAL81/633
10:51:10 11/25/01
(8)
Re: Fluctuating idle solved
-
Kaveman
08:03:33 11/27/01
(0)
Re: Fluctuating idle solved
-
T. Han
14:29:04 11/25/01
(6)
Problem still there *.+%&#
-
Erich M_SCAL81/633
15:41:11 11/26/01
(5)
do me this....
-
Peter Florance
17:18:41 11/26/01
(4)
So I unplugged the idle switch....
-
Erich M_SCAL81/633
12:28:00 11/28/01
(3)
Re: So I unplugged the idle switch....
-
Peter Florance
17:53:22 11/28/01
(2)
I am thinking coolant temp sensor
-
Erich M_SCAL81/633
13:45:36 11/29/01
(1)
Re: I am thinking coolant temp sensor
-
Peter Florance
15:04:26 11/29/01
(0)
decoding brake calipers - help!
-
James
09:27:45 11/25/01
(2)
Re: decoding brake calipers - help!
-
Chuck Denson
09:31:11 11/25/01
(1)
Re: decoding brake calipers - help!
-
james
10:08:50 11/25/01
(0)
Miles
-
Filious
08:48:03 11/25/01
(1)
Re: Miles
-
stewart
19:45:17 11/25/01
(0)
'79 528i for sale in Manhattan Beach
-
Eric
00:58:31 11/25/01
(0)
Hey E12 in Bimmer Mag
-
Steve Chandler
23:07:02 11/24/01
(2)
My ex-car!!!
-
Eric
00:51:33 11/25/01
(0)
Re: Hey E12 in Bimmer Mag
-
Chuck Denson
23:24:39 11/24/01
(0)
Hot air
-
T. Han
22:47:37 11/24/01
(0)
for sale
-
raymon
17:34:34 11/24/01
(0)
Parts for sale and dash cluster question
-
Steve Chandler
07:46:45 11/24/01
(7)
Re: Parts for sale and dash cluster question
-
Karl
22:29:02 11/24/01
(0)
Re: Parts for sale and dash cluster question
-
Bernie
20:52:26 11/24/01
(5)
Re: Parts for sale and dash cluster question
-
Steve Chandler
23:01:09 11/24/01
(4)
Re: Parts for sale and dash cluster question
-
Bernie Aguilar
20:19:43 11/25/01
(3)
Re: Parts for sale and dash cluster question
-
Steve Chandler
23:02:16 11/25/01
(2)
Re: Parts for sale and dash cluster question
-
Don Daynes
01:41:41 11/26/01
(1)
Re: Parts for sale and dash cluster question
-
Peter Florance
08:57:02 11/26/01
(0)
Shift knob compatibility
-
DScott
07:44:17 11/24/01
(4)
Re: Shift knob compatibility
-
T. Han
09:46:40 11/24/01
(3)
Re: Shift knob compatibility
-
Peter Florance
13:33:13 11/24/01
(2)
Re: Shift knob compatibility
-
Don Daynes
19:09:44 11/24/01
(1)
sorry stick shift (nt)
-
Peter Florance
20:51:19 11/25/01
(0)
Feedback Needed on a Cherished E12
-
Jerry
07:26:06 11/24/01
(7)
Re: Feedback Needed on a Cherished E12
-
Karl
22:38:55 11/24/01
(0)
Re: Feedback Needed on a Cherished E12
-
Randy Clark
14:20:53 11/24/01
(2)
great advice, Randy
-
Peter Florance
14:32:50 11/24/01
(1)
Re: great advice, Randy
-
Bernie
20:58:33 11/24/01
(0)
Re: Feedback Needed on a Cherished E12
-
Peter Florance
07:37:54 11/24/01
(2)
Re: Feedback Needed on a Cherished E12
-
mikey
11:16:38 11/24/01
(1)
Replace that head, keep engine
-
Erich M_SCAL81/633
13:21:32 11/24/01
(0)
motronic conversion snags
-
mikey
01:03:41 11/24/01
(2)
Re: motronic conversion snags
-
Wietse
08:15:02 11/24/01
(1)
Re: motronic conversion snags
-
Ron J
21:06:33 11/25/01
(0)
FL E12er's?
-
Kaveman
22:44:21 11/23/01
(0)
Rough, cold
-
T. Han
22:31:50 11/23/01
(8)
Re: Rough, cold
-
Peter Florance
07:19:10 11/24/01
(2)
Re: Rough, cold
-
T.Han
10:12:59 11/24/01
(1)
Re: Rough, cold
-
Peter Florance
13:31:22 11/24/01
(0)
Re: Rough, cold
-
ant dog
01:13:55 11/24/01
(0)
Re: Rough, cold
-
Don Daynes
22:57:26 11/23/01
(1)
Re: Rough, cold
-
T. Han
23:51:26 11/23/01
(0)
Re: Rough, cold
-
Kaveman
22:40:43 11/23/01
(1)
Re: Rough, cold
-
T. Han
00:17:54 11/24/01
(0)
Wheel compatability with other makes?
-
Nick_1981_528i
20:56:49 11/23/01
(3)
Re: Wheel compatability with other makes?
-
Randy McCafferty
20:24:38 11/24/01
(0)
Re: Wheel compatability with other makes?
-
Carlie Bentley
22:41:29 11/23/01
(0)
Re: Wheel compatability with other makes?
-
Karl
21:47:15 11/23/01
(0)
low caliber brake Caliper rebuild questions
-
Peter Claassen
19:41:43 11/23/01
(1)
Re: low caliber brake Caliper rebuild questions
-
Karl
22:06:41 11/23/01
(0)
...My rear end!
-
antdog
19:20:26 11/23/01
(0)
Sluggish performance - cooling system related????
-
Jaycee
19:13:32 11/23/01
(1)
Re: Sluggish performance - cooling system related????
-
Carlie Bentley
20:28:27 11/23/01
(0)
Inexpensive Oil Filters on eBay
-
Jim Race
17:04:14 11/23/01
(0)
Will 9.5" wide wheels fit in the rear??
-
RB
16:49:57 11/23/01
(2)
Re: Will 9.5" wide wheels fit in the rear??
-
T. Han
21:58:27 11/23/01
(1)
Re: Will 9.5" wide wheels fit in the rear??
-
Matt V
20:05:23 11/25/01
(0)
Instrument Panel Short - 1976 530i
-
Derek Mawbey
10:30:46 11/23/01
(3)
Re: Instrument Panel Short - 1976 530i
-
Karl
22:15:33 11/23/01
(1)
Re: Instrument Panel Short - 1976 530i
-
T. Han
12:43:46 11/24/01
(0)
Re: Instrument Panel Short - 1976 530i
-
Don Daynes
16:21:31 11/23/01
(0)
Adjustable Valve Timing Gear & Clearance issues?
-
Bill Barrett
09:51:34 11/23/01
(1)
Re: Adjustable Valve Timing Gear & Clearance issues?
-
antdog
19:16:16 11/23/01
(0)
Everything has to go....
-
Jim Race
04:29:05 11/23/01
(1)
Re: Everything has to go....
-
Jim Race
04:42:42 11/23/01
(0)
M535i Pictures
-
Troy Rudolph (Webmaster)
20:56:52 11/22/01
(3)
It was really a 535 - The car was rebodied
-
james
01:38:19 11/23/01
(2)
Re: It was really a 535 - The car was rebodied
-
Troy Rudolph
13:12:54 11/23/01
(1)
Definitely early body, but later hood
-
Lars PNW 81_528i
13:56:21 11/23/01
(0)
Scott, Jefflee, and Robert
-
Chuck Denson
10:05:04 11/22/01
(2)
I'm there
-
Robert Bondi
19:15:34 11/22/01
(0)
Yup, as far as I know we are still in 8pm...
-
Scott
10:45:03 11/22/01
(0)
Qt. every 100...Lars
-
T. Han
21:03:51 11/21/01
(5)
Re: Qt. every 100...Lars
-
Jim Davis
23:00:39 11/21/01
(2)
Re: Qt. every 100...Lars
-
T. Han
00:29:18 11/22/01
(1)
Hot or cold level shouldn't change much
-
Lars PNW 81_528i
06:52:26 11/22/01
(0)
Quite Strange, but that volume has to be trackable
-
Lars PNW 81_528i
22:18:42 11/21/01
(1)
Re: Quite Strange, but that volume has to be trackable
-
stewart
22:34:42 11/21/01
(0)
Fender flars; Hey Carlie !
-
T. Han
20:51:16 11/21/01
(1)
Mmmmmm, fender flares....
-
Carlie Bentley
18:17:50 11/22/01
(0)
Tranny.
-
Corey Rodgers
19:47:13 11/21/01
(3)
Re: Tranny.
-
Carlie Bentley
22:31:32 11/22/01
(0)
Re: Tranny.
-
T. Han
21:16:12 11/21/01
(1)
atf leaks
-
marc
21:43:56 11/22/01
(0)
Exhaust PN 18 11 1 176 330
-
Scott
19:08:27 11/21/01
(1)
Re: Exhaust PN 18 11 1 176 330
-
Robet Bondi
20:38:50 11/21/01
(0)
Interest in set of 14inx7 off 628???
-
Jefflee
18:33:26 11/21/01
(0)
E12 Question
-
Derek
15:56:17 11/21/01
(2)
Re: E12 Question
-
Karl
22:28:53 11/23/01
(0)
Try a new fuel filter
-
Jim Ockner
17:00:25 11/21/01
(0)
cold start problem - follow up
-
Jim Ockner
15:11:29 11/21/01
(0)
Happy Thanksgiving!
-
Jim Davis
13:27:04 11/21/01
(5)
Driving the e12 anywhere for Turkey?
-
Dave Spencer
18:31:47 11/21/01
(4)
Re: Driving the e12 anywhere for Turkey?
-
Peter Florance
18:54:25 11/21/01
(2)
Re: Driving the e12 anywhere for Turkey?
-
Jim Davis
23:06:52 11/21/01
(1)
Re: Driving the e12 anywhere for Turkey?
-
Carlie Bentley
18:19:41 11/22/01
(0)
Re: Driving the e12 anywhere for Turkey?
-
Carlie Bentley
18:47:57 11/21/01
(0)
SoCal Saturday 11-24 get together
-
Don Daynes
12:14:37 11/21/01
(4)
Re: SoCal Saturday 11-24 get together
-
Bernie Aguilar
21:08:03 11/24/01
(0)
Re: SoCal Saturday 11-24 get together
-
Eric
14:28:43 11/23/01
(0)
Re: SoCal Saturday 11-24 get together
-
Jim Hineline
11:27:31 11/23/01
(1)
Re: SoCal Saturday 11-24 get together
-
Don Daynes
16:10:00 11/23/01
(0)
bg24624@binghamton.edu
-
Encounter with 16v GTI
11:30:31 11/21/01
(4)
Probably nothing to be seriously concerned about
-
Lars PNW 81_528i
11:48:29 11/21/01
(2)
Re: Probably nothing to be seriously concerned about
-
T.Han
15:34:56 11/21/01
(1)
Wow... Quart every 100 miles....?????
-
Lars PNW 81_528i
16:53:09 11/21/01
(0)
Re: bg24624@binghamton.edu
-
Patrick
11:43:01 11/21/01
(0)
euro distributors
-
Patrick
09:07:46 11/21/01
(0)
FS: 3.64 diff $125
-
TCD
09:02:14 11/21/01
(0)
James's M535i pictures
-
Adam Wilson
07:07:43 11/21/01
(5)
POP-Lock.....file to big for many mail servers.
-
Lars PNW 81_528e
09:16:58 11/21/01
(1)
IT guy says we're good to 10, so 7 's a cinch!
-
Scott
09:33:43 11/21/01
(0)
The ZIP is 14 mg???? let me guess...
-
Scott
08:55:45 11/21/01
(2)
snicker, married, no kids
-
Adam Wilson
09:20:08 11/21/01
(1)
Thanks!! You DA MAN!!
-
Scott
09:31:33 11/21/01
(0)
Stahl headers on ebay
-
stewart
00:52:16 11/21/01
(3)
Re: Try to get the part # stamped on the flange
-
Bill Barrett
23:34:43 11/21/01
(0)
Re: Stahl headers on ebay
-
Randy
22:51:36 11/21/01
(0)
Re: Stahl headers on ebay
-
Peter Maag
02:09:42 11/21/01
(0)
Took my BBS to sandblast today
-
Jefflee
19:25:14 11/20/01
(2)
What blasting media is he going to use.
-
Carlie Bentley
18:51:55 11/21/01
(1)
Re: What blasting media is he going to use.
-
Jefflee
08:59:05 11/30/01
(0)
Correct Clutch for M535i - Found
-
Jefflee
18:14:17 11/20/01
(0)
Goodies Available
-
Troy Rudolph
17:11:56 11/20/01
(4)
Re: Goodies Available
-
Robert Purington
22:57:43 11/20/01
(3)
Re: Goodies Available
-
Troy Rudolph
23:03:09 11/20/01
(2)
Re: Goodies Available
-
R W Fortman
09:17:44 11/21/01
(1)
Re: Goodies Available
-
Troy Rudolph
13:15:58 11/21/01
(0)
e12 event in Va Beach, VA?
-
Peter Florance
16:58:09 11/20/01
(3)
Re: e12 event in Va Beach, VA?
-
Randy Clark
21:38:50 11/20/01
(0)
Re: e12 event in Va Beach, VA?
-
Randy McCafferty
21:35:53 11/20/01
(0)
Re: e12 event in Va Beach, VA?
-
Sam Schultz
17:33:14 11/20/01
(0)
pass. side mirror for my 77 e12, chrome factory??!
-
antdog
16:45:43 11/20/01
(7)
Re: pass. side mirror for my 77 e12, chrome factory??!
-
Robert Bondi
17:09:14 11/20/01
(6)
Re: pass. side mirror for my 77 e12, chrome factory??!
-
Troy Rudolph
17:29:29 11/20/01
(5)
Re: pass. side mirror for my 77 e12, chrome factory??!
-
antdog
11:37:57 11/22/01
(2)
Re: pass. side mirror for my 77 e12, chrome factory??!
-
Robert Bondi
03:20:08 11/23/01
(1)
Re: pass. side mirror for my 77 e12, chrome factory??!
-
antdog
19:26:21 11/23/01
(0)
Re: pass. side mirror for my 77 e12, chrome factory??!
-
Robert Bondi
22:59:54 11/20/01
(1)
Re: pass. side mirror for my 77 e12, chrome factory??!
-
antdog
11:35:00 11/22/01
(0)
me wagon
-
James
15:10:17 11/20/01
(8)
timing questions
-
Peter Florance
16:52:23 11/20/01
(1)
yes its an 008 but timing to follow
-
James
04:33:48 11/21/01
(0)
We've got identical cars
-
Luke
16:29:39 11/20/01
(0)
Re: me wagon
-
James
15:13:48 11/20/01
(4)
Re: links...
-
Dave Spencer
15:17:41 11/20/01
(3)
thanks
-
James
01:39:01 11/21/01
(1)
No Prob...
-
Dave Spencer
08:38:23 11/21/01
(0)
you have exceeded your allocated bandwidth
-
Adam Wilson
15:47:26 11/20/01
(0)
Fluctuating RPM when cold
-
Erich M SCAL_81/633
13:08:59 11/20/01
(2)
Re: Fluctuating RPM when cold
-
Peter Florance
13:42:24 11/20/01
(1)
Re: Fluctuating RPM when cold
-
Peter Florance
13:43:19 11/20/01
(0)
heater leak
-
Bob
12:30:13 11/20/01
(4)
Re: heater leak
-
Bob
17:42:02 11/20/01
(0)
Re: heater leak
-
James
14:11:47 11/20/01
(0)
Re: heater leak
-
Mike V.
13:00:55 11/20/01
(1)
Re: heater leak
-
R. W. Fortmman
11:37:19 11/21/01
(0)
drum roll please (tatatatatatata)
-
Adam Wilson
10:25:06 11/20/01
(7)
Did the devil make you do it??? Wooooooooo!! (nt)
-
Eric
11:36:48 11/20/01
(0)
PLLBSSSSTTTT!(sound of coffee thru nose)
-
Sam R.
10:59:28 11/20/01
(0)
Re: drum roll please (tatatatatatata)
-
Scott
10:33:28 11/20/01
(4)
Re: drum roll please (tatatatatatata)
-
Mark
11:04:51 11/20/01
(3)
laugh, you mean Adam, aka Dr. Sawzall?
-
FLIP
11:06:29 11/20/01
(2)
doh! so used to typing FLIP, I used it again! eom
-
Adam Wilson
12:09:53 11/20/01
(1)
Re: doh! so used to typing FLIP, I used it again! eom
-
Mark
19:47:13 11/20/01
(0)
brake work hints
-
marc
08:38:01 11/20/01
(0)
Testing for false air ?
-
Ellis
06:45:15 11/20/01
(2)
Re: Testing for false air ?
-
Karl
07:38:43 11/21/01
(0)
Re: Testing for false air ?
-
Peter Florance
11:04:52 11/20/01
(0)
Bleeder fitting
-
T. Han
22:19:52 11/19/01
(5)
Re: Bleeder fitting
-
Karl
07:51:05 11/21/01
(0)
Re: Bleeder fitting
-
Peter Florance
07:18:11 11/20/01
(3)
Now you've gone and done it...
-
Dave Spencer
07:29:17 11/20/01
(2)
Re: Now you've gone and done it...
-
Peter Florance
16:43:28 11/20/01
(1)
Yep. It was me.
-
Dave Spencer
20:04:41 11/20/01
(0)
Brake rattle
-
T. Han
22:14:17 11/19/01
(3)
Re: Brake rattle
-
Peter Florance
07:14:51 11/20/01
(0)
Re: Brake rattle
-
marc
22:23:39 11/19/01
(1)
Re: Brake rattle
-
T. Han
16:05:46 11/20/01
(0)
the racing 535i link from James
-
Greg
19:02:37 11/19/01
(5)
Re: the racing 535i link from James
-
James
14:16:01 11/20/01
(0)
Re: the racing 535i link from James
-
Troy Rudolph
22:12:33 11/19/01
(0)
Okay, I want those fender flares. :-)
-
Carlie Bentley
19:49:16 11/19/01
(2)
Re: Okay, I want those fender flares. :-) Me too..
-
Peter Claassen
16:00:56 11/20/01
(0)
I need a set of those for the 520/6
-
Sam Schultz
09:01:56 11/20/01
(0)
First Ever Opposing Opinion to Bumper Reduction
-
anonymous
17:38:35 11/19/01
(28)
Buy a '78 Bronco and stay in the slow lane........
-
Chad
12:04:16 11/20/01
(0)
Re: First Ever Opposing Opinion to Bumper Reduction
-
Robert Bondi
00:40:07 11/20/01
(0)
I LOVE THESE BUMPERS
-
greghill
21:19:35 11/19/01
(1)
Dude, your a wild man!
-
Randy McCafferty
09:33:49 11/20/01
(0)
FS: U.S. Bumpers 4 Sale
-
Jefflee
21:01:22 11/19/01
(0)
Re: First Ever Opposing Opinion to Bumper Reduction
-
Troy RudolphT
20:58:02 11/19/01
(0)
Soap Box! and I don't care who knows. :-P
-
Carlie Bentley
20:14:08 11/19/01
(9)
Re: Soap Box! and I don't care who knows. :-P
-
mikey
12:25:01 11/23/01
(0)
Re: Soap Box! and I don't care who knows. :-P
-
T. Han
22:43:52 11/19/01
(6)
Of course.
-
Carlie Bentley
06:52:07 11/20/01
(5)
Re: Of course.
-
mikey
12:42:27 11/23/01
(0)
Passing of Common Sense
-
Adam Wilson
11:04:16 11/20/01
(1)
Good Stuff (eom)
-
Don Daynes
13:10:07 11/20/01
(0)
Devil's Advocate...
-
Dave Spencer
07:24:59 11/20/01
(1)
bags and belts together
-
marc
08:06:07 11/20/01
(0)
Re: Soap Box! and I don't care who knows. :-P
-
T. Han
22:42:55 11/19/01
(0)
Haven't changed mine, still ugly though
-
Randy McCafferty
19:57:23 11/19/01
(0)
Just for the Record
-
Sam R.
19:22:13 11/19/01
(2)
No Cajones if No Name (nt)
-
Eric
19:23:53 11/19/01
(1)
Re: No Cajones if No Name (nt)
-
Sam R.
19:24:42 11/19/01
(0)
Re: First Ever Opposing Opinion to Bumper Reduction
-
Eric
19:21:45 11/19/01
(0)
Re: First Ever Opposing Opinion to Bumper Reduction
-
Don Daynes
19:09:40 11/19/01
(2)
Re: First Ever Opposing Opinion to Bumper Reduction
-
Luke
16:47:21 11/20/01
(0)
LMAO, nice Don, couldn't agree more
-
Adam Wilson
11:12:44 11/20/01
(0)
Not exactly 100% agreement, but...
-
Dave Spencer
18:58:54 11/19/01
(0)
Re: First Ever Opposing Opinion to Bumper Reduction
-
jim
18:57:54 11/19/01
(0)
New Volvo vs e12 bumper
-
Collins
18:30:55 11/19/01
(1)
bumper did not help me today
-
marc
22:04:33 11/19/01
(0)
aluminum flywheel on ebay
-
FLIP
17:16:21 11/19/01
(6)
Thats Sweet, Pricey, But Sweeeet! anyone know...
-
Scott
19:24:56 11/19/01
(5)
Re: Thats Sweet, Pricey, But Sweeeet! anyone know...
-
Frank H
20:02:46 11/19/01
(4)
Re: Thats Sweet, Pricey,confused...
-
Scott
11:15:20 11/20/01
(3)
Re: Thats Sweet, Pricey,confused...
-
Wietse
14:12:15 11/20/01
(0)
Re: Thats Sweet, Pricey,confused...
-
Peter Florance
11:57:03 11/20/01
(1)
Thanks for the info...
-
Scott
14:36:35 11/20/01
(0)
Another shot of Peter on the track.
-
Jeff C
16:09:34 11/19/01
(5)
No Helmet?
-
Eric
19:16:31 11/19/01
(3)
not for skid pad and slalom
-
Peter Florance
19:24:17 11/19/01
(2)
Re: not for skid pad and slalom
-
T. Han
22:48:45 11/19/01
(1)
Re: not for skid pad and slalom
-
Peter Florance
16:53:49 11/20/01
(0)
See, what did I tell you.
-
Carlie Bentley
16:24:06 11/19/01
(0)
passenger side leather seat FS
-
Steve Chandler
14:01:39 11/19/01
(3)
Steve...I tried your email..no luck...
-
Scott
19:42:37 11/19/01
(2)
Re: Steve...I tried your email..no luck...
-
Steve Chandler
11:28:16 11/20/01
(1)
NEWMAN!!!! oh well..thanks anyway(eom)
-
Scott
16:38:01 11/20/01
(0)
Replacing stereo deck, need help removing...
-
Andre528i
12:03:33 11/19/01
(1)
Re: Replacing stereo deck, need help removing...
-
James
12:37:06 11/19/01
(0)
Inside leather between front and rear door
-
Steve Chandler
09:48:29 11/19/01
(4)
Re: Inside leather between front and rear door
-
Randy McCafferty
13:31:24 11/20/01
(1)
Re: Inside leather between front and rear door
-
Dave Spencer
19:52:15 11/20/01
(0)
Re: Inside leather between front and rear door
-
Karl
22:14:28 11/19/01
(0)
b-pillar trim
-
greghill
10:17:37 11/19/01
(0)
Alpina Air dam problem solved!!
-
Scott
08:20:11 11/19/01
(1)
Re: Alpina Air dam problem solved!!
-
TCD
09:14:47 11/19/01
(0)
320i parts # for runners ?
-
Reny
07:56:11 11/19/01
(1)
Re: 320i parts # for runners ?
-
Bill Barrett
09:07:20 11/19/01
(0)
WTB: 1 Alpina B2 Wheel.
-
Carlie Bentley
07:04:36 11/19/01
(0)
Ditching the bumpers.
-
Carlie Bentley
06:59:30 11/19/01
(9)
Maybe it would look like this....
-
Damon C
08:25:31 11/19/01
(2)
Welll,,,maybe not.
-
Carlie Bentley
16:05:07 11/19/01
(0)
HAH!!! Thats great!!
-
Scott
08:28:05 11/19/01
(0)
Oh crap, I hope Robert Bondi does see this post!!
-
Scott
08:21:47 11/19/01
(0)
See the racer site posted yesterday
-
Lars PNW 81_528i
08:21:24 11/19/01
(4)
Where is that link?
-
Carlie Bentley
16:32:04 11/19/01
(3)
here you go... make sure to also click on
-
greg
18:51:57 11/19/01
(2)
Wow!
-
Carlie Bentley
19:45:45 11/19/01
(1)
Re: Wow!
-
Mark80528i
12:17:24 11/20/01
(0)
Home with the second.
-
Carlie Bentley
06:15:57 11/19/01
(0)
Clicking/squeaking sound
-
Ed Falkner
04:27:05 11/19/01
(2)
Re: Clicking/squeaking sound
-
Walt Barie
07:27:37 11/19/01
(0)
Re: Clicking/squeaking sound
-
Peter Florance
06:29:37 11/19/01
(0)
Hazard switch repair
-
T. Han
01:07:30 11/19/01
(10)
Re: Hazard switch repair
-
Michael Longeneker
17:49:13 11/20/01
(0)
Re: Hazard switch repair
-
Dennis
08:27:06 11/19/01
(0)
Ditto on Charlie's response...
-
Dave Spencer
07:26:21 11/19/01
(6)
hazard light switch repair, I've done it
-
FLIP
09:49:19 11/19/01
(5)
Re: hazard light switch repair, I've done it
-
Lenny D.
21:47:01 11/19/01
(0)
Ditto on the FAQ
-
Karl
16:11:47 11/19/01
(0)
10-4 on the FAQ
-
Peter Florance
11:23:41 11/19/01
(1)
yep, need some pictures, I'll try to take some
-
FLIP
12:15:14 11/19/01
(0)
Works great IF that is the problem...
-
Dave Spencer
10:18:38 11/19/01
(0)
Re: Hazard switch repair
-
Carlie Bentley
06:44:00 11/19/01
(0)
Idle adjustments,,, Please, pretty long
-
Dennis
00:30:39 11/19/01
(3)
Sounds like timing to me.
-
Carlie Bentley
06:40:34 11/19/01
(0)
Re: Idle adjustments,,, Please, pretty long
-
Peter Florance
06:28:07 11/19/01
(0)
Re: Idle adjustments,,, Please, pretty long
-
T. Han
01:16:57 11/19/01
(0)
Need Euro Bumpers
-
Matt Evans
20:12:16 11/18/01
(1)
Euro M535i bumper/spoiler and rear bumper
-
James
03:25:06 11/19/01
(0)
More Driver's School pics
-
Peter Florance
18:44:56 11/18/01
(1)
Peter was just out pushin' 3 series.
-
Carlie Bentley
06:30:15 11/19/01
(0)
two things for Peter Florance
-
Robert Bondi
16:59:00 11/18/01
(9)
bad news on the longer switch
-
Peter Florance
15:58:31 11/19/01
(7)
Re: bad news on the longer switch
-
Robert Bondi
16:37:08 11/19/01
(6)
Re: bad news on the longer switch
-
Peter Florance
20:44:47 11/19/01
(5)
Re: bad news on the longer switch
-
Robert Bondi
21:42:58 11/19/01
(4)
Re: bad news on the longer switch
-
Peter Florance
07:21:46 11/20/01
(0)
Re: bad news on the longer switch
-
David B
22:49:35 11/19/01
(2)
Re: bad news on the longer switch
-
Robert Bondi
02:31:36 11/20/01
(1)
Re: bad news on the longer switch
-
David B
00:43:03 11/21/01
(0)
Re: two things for Peter Florance
-
Peter Florance
17:02:43 11/18/01
(0)
Heater/Defroster Fan
-
Troy Rudolph
16:46:06 11/18/01
(3)
Re: Heater/Defroster Fan
-
Peter Florance
16:59:02 11/18/01
(2)
Re: Heater/Defroster Fan
-
Troy Rudolph
21:00:14 11/19/01
(1)
Re: Heater/Defroster Fan
-
Lenny D.
21:52:48 11/19/01
(0)
Glovebox latch repair FAQ posted
-
Peter Florance
16:15:46 11/18/01
(2)
Thx Peter, I'll give it a try; a pic is worth...nt
-
Lenny D.
01:18:46 11/19/01
(1)
Please offer your feedback (nt)
-
Peter Florance
10:24:24 11/19/01
(0)
Modified E12 for sale
-
Ben Miller
13:59:31 11/18/01
(4)
Re: Modified E12 for sale
-
Jeff
16:05:23 11/21/01
(0)
Re: Modified E12 for sale
-
Don Daynes
01:26:30 11/19/01
(2)
Re: Modified E12 for sale
-
Eric
13:01:09 11/19/01
(0)
Re: Modified E12 for sale
-
Jim Hineline
02:17:41 11/19/01
(0)
Guage Panel? Alpina Option?
-
Kaveman
13:20:46 11/18/01
(3)
Re: Guage Panel? Alpina Option?
-
Carlie Bentley
06:19:49 11/19/01
(0)
check BMP
-
Robert Bondi
16:07:54 11/18/01
(1)
yes BMP, they're catalog lists it for the E12 eom
-
FLIP
10:33:34 11/19/01
(0)
Racing 535 E12 in Germany
-
James
12:44:16 11/18/01
(0)
528ia
-
Paul
09:42:14 11/18/01
(1)
where?
-
Peter Florance
11:27:43 11/18/01
(0)
Paging Frank H
-
Mark
05:28:41 11/18/01
(0)
81 Aux Air Valve Question
-
Jim Ockner
23:46:11 11/17/01
(5)
Re: 81 Aux Air Valve Question
-
Robert Bondi
01:47:20 11/18/01
(3)
Slight clarification
-
Peter Florance
09:26:51 11/18/01
(1)
cold start valve FAQ
-
Robert Bondi
16:39:17 11/18/01
(0)
Thanks, Robert! Great info!
-
Jim Ockner
02:03:58 11/18/01
(0)
Never mind on question #1
-
Jim Ockner
00:18:53 11/18/01
(0)
Bosch part #
-
stewart
23:37:31 11/17/01
(1)
0.120.489.619
-
Peter Florance
20:07:20 11/18/01
(0)
Palm Beach E12er's?
-
Kaveman
19:29:48 11/17/01
(0)
'81 528ia Running Rich...what to check
-
JohnN
16:11:03 11/17/01
(4)
Re: '81 528ia Running Rich...what to check
-
John (too)
00:21:02 11/18/01
(0)
Re: '81 528ia Running Rich...what to check
-
Karl
21:59:24 11/17/01
(0)
Re: '81 528ia Running Rich...what to check
-
Peter Florance
17:23:49 11/17/01
(1)
Re: '81 528ia Running Rich...what to check
-
Jimmy
09:45:31 11/18/01
(0)
What a beautiful day here in. . . .
-
Jefflee
14:59:42 11/17/01
(3)
Re: What a beautiful day here in. . . .
-
Karl
08:54:07 11/18/01
(0)
Yes: What a beautiful day here in. . . . (too)
-
Hmmm, . . .
00:26:58 11/18/01
(0)
Re: What a beautiful day here in. . . .
-
Peter Florance
15:06:23 11/17/01
(0)
About last night
-
Scott
14:59:17 11/17/01
(1)
Re: About last night
-
Chuck Denson
15:15:12 11/17/01
(0)
I learned something today, nice surprise.(long)
-
Scott
14:25:50 11/17/01
(0)
Head Bolt Torque Settings
-
Tara Knowles
14:09:07 11/17/01
(1)
Re: Head Bolt Torque Settings
-
T.Han
14:22:35 11/17/01
(0)
still having start problems!
-
Nick
12:33:04 11/17/01
(14)
PROBLEM SOLVED!!!
-
Nick
18:09:45 11/18/01
(0)
Re: still having start problems!
-
T.Han
14:41:38 11/17/01
(0)
Re: still having start problems!
-
robert bondi
12:59:16 11/17/01
(11)
Re: still having start problems!
-
Nick
15:04:18 11/17/01
(0)
Re: still having start problems!
-
Scott
14:42:30 11/17/01
(9)
Re: still having start problems!
-
Nick
19:55:46 11/17/01
(1)
Re: still having start problems!
-
Don Daynes
22:41:20 11/17/01
(0)
Whack it with a hammer and then,,,,,,
-
Jefflee
14:49:17 11/17/01
(6)
Re: Whack it with a hammer and then,,,,,,
-
Scott
14:52:59 11/17/01
(5)
ATL crowd...
-
Robert Bondi
14:59:19 11/17/01
(4)
Re: ATL crowd...
-
Scott
15:02:19 11/17/01
(3)
Re: ATL crowd...
-
Chuck Denson
15:19:53 11/17/01
(2)
oops
-
Robert bondi
15:38:13 11/17/01
(1)
Watch it!
-
Dave Spencer
15:45:07 11/17/01
(0)
WTB(orrow)
-
Chuck Denson
11:31:33 11/17/01
(4)
Re: WTB(orrow)
-
Chuck Denson
15:09:26 11/17/01
(1)
Re: WTB(orrow)
-
Trubey
20:40:06 11/17/01
(0)
Re: WTB(orrow)
-
Scott
14:31:07 11/17/01
(0)
Re: WTB(orrow)
-
Robert Bondi
12:49:15 11/17/01
(0)
WTB BMW and/or Hartge key chain
-
jH
10:37:31 11/17/01
(0)
Seat swap?
-
Steve CHandler
10:27:23 11/17/01
(1)
Re: Seat swap?
-
Carlie Bentley
23:21:28 11/17/01
(0)
WTB Headers for '81 E12 - Anyone?
-
Erik M.
10:23:59 11/17/01
(1)
Re: WTB Headers for '81 E12 - Anyone?
-
Troy Rudolph
00:46:23 11/18/01
(0)
Third Try, Same Question
-
Robert Bondi
00:40:00 11/17/01
(14)
Re: 8mpg???
-
David B
00:19:41 11/18/01
(2)
Re: 8mpg???
-
Peter Florance
09:30:27 11/18/01
(1)
Thanks guys (nt)
-
Robert Bondi
16:26:14 11/18/01
(0)
Re: Third Try, Same Question
-
Wietse
10:08:41 11/17/01
(7)
what about cam timing
-
Peter Florance
14:42:40 11/17/01
(0)
Re: Third Try, Same Question
-
Robert Bondi
12:43:09 11/17/01
(5)
Re: Third Try, Same Question
-
Wietse
12:59:23 11/17/01
(4)
Re: Third Try, Same Question
-
Thanks for FB
14:45:46 11/17/01
(0)
Re: Third Try, Same Question
-
Peter Florance
14:41:38 11/17/01
(2)
injector spec slightly different
-
Robert Bondi
14:53:42 11/17/01
(1)
Re: injector spec slightly different
-
Karl
22:16:52 11/17/01
(0)
Re: Third Try, Same Question
-
Bill Barrett
09:29:55 11/17/01
(0)
don't know, i never check
-
...tom
07:18:53 11/17/01
(0)
Re: Third Try, Same Question
-
Karl
07:01:59 11/17/01
(0)
Archive Searches
-
Randy Clark
22:24:52 11/16/01
(3)
Re: Archive Searches
-
Randy Clark
08:47:27 11/17/01
(0)
Re: Archive Searches
-
Chuck Denson
04:23:02 11/17/01
(0)
Re: Archive Searches
-
Luke
23:46:20 11/16/01
(0)
Question for Peter Florance
-
Scott
15:33:48 11/16/01
(1)
check your email
-
Peter Florance
16:09:51 11/16/01
(0)
SUNROOF STUCK OPEN
-
medfly
14:43:25 11/16/01
(0)
SUNROOF STUCK OPEN
-
medfly
14:42:52 11/16/01
(4)
Re: SUNROOF STUCK OPEN
-
Karl
06:59:15 11/17/01
(0)
Re: SUNROOF STUCK OPEN
-
Scott
14:54:44 11/16/01
(2)
I bang on mine too
-
Luke
18:00:45 11/17/01
(0)
Re: SUNROOF STUCK OPEN
-
T. Han
18:41:31 11/16/01
(0)
test -- my last posts aren't posting (eom)
-
Jeff C
14:31:45 11/16/01
(0)
Clack, clack...
-
T. Han
14:12:28 11/16/01
(3)
Re: Clack, clack...
-
Peter Florance
14:38:55 11/16/01
(0)
Re: Clack, clack...
-
Jeff C
14:29:41 11/16/01
(1)
Re: Clack, clack...
-
Bob Iverach
19:54:48 11/16/01
(0)
Combo Relay...Where is it?
-
Mishast
14:09:30 11/16/01
(2)
Re: Combo Relay...Where is it?
-
Chris
15:10:13 11/16/01
(1)
Re: Combo Relay...Where is it?
-
T. Han
18:43:36 11/16/01
(0)
Glove box handle/clasp
-
Lenny D.
13:39:51 11/16/01
(7)
check the new FAQ (nt)
-
Peter Florance
16:19:39 11/18/01
(0)
Re: Glove box handle/clasp
-
Jimmy
10:08:30 11/18/01
(0)
Re: Glove box handle/clasp
-
Bob Iverach
19:57:19 11/16/01
(0)
Re: Glove box handle/clasp
-
Peter Florance
13:42:24 11/16/01
(3)
Re: Glove box handle/clasp
-
Lenny D.
17:51:49 11/16/01
(1)
Re: Glove box handle/clasp
-
Peter Florance
18:58:55 11/16/01
(0)
Re: Glove box handle/clasp
-
Scott
13:59:17 11/16/01
(0)
Thanks T. Han
-
Peter Florance
12:10:27 11/16/01
(1)
Re: Thanks T. Han
-
T. Han
13:55:21 11/16/01
(0)
BMW on History Channel Sat AM
-
Harry
11:12:44 11/16/01
(1)
Re: BMW on History Channel Sat AM
-
Carlie Bentley
23:25:02 11/17/01
(0)
what's on your clock?
-
Steve
11:05:03 11/16/01
(24)
27,000 (EOM)
-
Randy McCafferty
20:06:16 11/19/01
(1)
Re: 27,000 (EOM)
-
Randy again
09:42:40 11/20/01
(0)
Re: what's on your clock?
-
Carlie Bentley
08:42:33 11/17/01
(0)
1981 - 208k, 1980 - 227k
-
...tom
05:07:12 11/17/01
(0)
173,000
-
Chuck Denson
04:34:15 11/17/01
(0)
159k and rising fast (nt).
-
Eric
01:14:27 11/17/01
(0)
auto 240K, stick 77k
-
David B
23:12:21 11/16/01
(0)
Re: what's on your clock?
-
Randy Clark
22:13:36 11/16/01
(0)
Re: what's on your clock?
-
Tara Knowles
19:56:56 11/16/01
(0)
Re: what's on your clock?
-
Kaveman
18:28:22 11/16/01
(0)
311km (eom)
-
Luke
16:46:46 11/16/01
(0)
215,0000 79 528i
-
Collins
16:03:46 11/16/01
(0)
126,996
-
Dave Spencer
15:00:13 11/16/01
(0)
Re: what's on your clock?
-
medfly
14:46:58 11/16/01
(0)
Re: what's on your clock?
-
Bob Iverach
14:15:11 11/16/01
(0)
Re: what's on your clock?
-
fred
14:12:27 11/16/01
(0)
190,000 all original engine
-
Martyn Smith
14:12:06 11/16/01
(0)
Re: what's on your clock?
-
Lenny D.
13:16:37 11/16/01
(0)
340K
-
Peter Florance
12:57:15 11/16/01
(0)
Re: what's on your clock?
-
Greg
12:49:14 11/16/01
(0)
just passed 120K, original engine, '81 528i (eom)
-
FLIP
12:47:22 11/16/01
(0)
Re: what's on your clock?
-
Robert Bondi
12:39:47 11/16/01
(0)
Re: what's on your clock?
-
Jeff C
12:34:55 11/16/01
(0)
Re: what's on your clock?
-
Mark80528i
12:21:22 11/16/01
(0)
Shudder & Studder Revisited
-
Bob
10:45:53 11/16/01
(0)
Invite for Andretti Speed Labs tonight...
-
Scott
10:03:17 11/16/01
(2)
D'OH! Re: Invite for Andretti Speed
-
Chuck Denson
12:15:32 11/16/01
(0)
Re: Invite for Andretti Speed Labs tonight...
-
Sam R.
10:35:27 11/16/01
(0)
Embarrasing Question!
-
Randy McCafferty
10:01:19 11/16/01
(6)
Thanks all! (EOM)
-
Randy M
14:55:00 11/16/01
(0)
Just read about this earlier this morning
-
Jim Davis
12:38:29 11/16/01
(0)
Re: Embarrasing Question!
-
Scott
10:07:20 11/16/01
(3)
Re: Embarrasing Question!
-
Peter Florance
12:09:09 11/16/01
(0)
Never pedal when starting . . . .
-
Jefflee
10:39:29 11/16/01
(0)
Re: Embarrasing Question!
-
Mark
10:36:29 11/16/01
(0)
Hard to start when warm
-
Randy McCafferty
09:54:40 11/16/01
(2)
Re: Hard to start when warm
-
Peter Florance
12:14:52 11/16/01
(1)
Re: Hard to start when warm
-
Lenny D.
13:21:46 11/16/01
(0)
Computing displacement & comp. ratio
-
Bill Barrett
09:28:19 11/16/01
(3)
Re: Computing displacement & comp. ratio
-
Don Daynes
17:52:42 11/16/01
(0)
Re: Computing displacement & comp. ratio
-
Scott
09:58:24 11/16/01
(0)
Hmmm, maybe. (Long, of course.)
-
Carlie Bentley
09:38:50 11/16/01
(0)
Another E12 saved from certain disaster.
-
Carlie Bentley
09:27:18 11/16/01
(1)
Re: Another E12 saved from certain disaster.
-
stewart
11:49:20 11/16/01
(0)
In the best of times. Ahhh. but the worst...
-
Jim Race
02:37:45 11/16/01
(16)
Re: In the best of times. Ahhh. but the worst...
-
Eric
19:01:35 11/16/01
(0)
MAN WHAT HAPPENED LOOKS LIKE YOU GOT SOME AIR
-
STAN
16:43:02 11/16/01
(0)
The amazing thing is...
-
Jim Davis
14:33:44 11/16/01
(0)
Re: In the best of times. Ahhh. but the worst...
-
T. Han
14:07:10 11/16/01
(1)
Re: In the best of times. Ahhh. but the worst...
-
Jim Race
14:59:43 11/16/01
(0)
Glad you made it! Looks terrible! (nt)
-
Jim Davis
12:40:50 11/16/01
(0)
Holy *%$#!!!
-
Chad Z
12:25:23 11/16/01
(0)
Glad to See You Are Writing to US!!!
-
Kavman
10:32:20 11/16/01
(0)
omigod, are you alright?
-
FLIP
10:12:36 11/16/01
(0)
WOW!! What happened? **
-
David P
10:05:53 11/16/01
(0)
Re: In the best of times. Ahhh. but the worst...
-
Sam R.
09:41:26 11/16/01
(0)
Yikes.
-
Carlie Bentley
09:14:43 11/16/01
(0)
Jim, I am seriously impressed that...
-
Scott
08:35:48 11/16/01
(0)
Re: In the best of times. Ahhh. but the worst...
-
Greg
07:15:12 11/16/01
(0)
Re: In the best of times. Ahhh. but the worst...
-
Chuck Denson
06:05:58 11/16/01
(0)
Re: In the best of times. Ahhh. but the worst...
-
Mark
02:45:12 11/16/01
(0)
Car got towed, possible damage?
-
Luke
23:46:43 11/15/01
(3)
god, that sucks. Why'd you get towed? (eom)
-
FLIP
10:15:15 11/16/01
(1)
Re: god, that sucks. Why'd you get towed? (eom)
-
Luke
16:45:30 11/16/01
(0)
Re: Car got towed, possible damage?
-
Scott
08:40:00 11/16/01
(0)
fuel economy with 320i runner
-
Robert Bondi
23:46:31 11/15/01
(0)
e-12 stuff for sale.
-
Jeremy T
18:32:06 11/15/01
(1)
Re: e-12 stuff for sale.
-
R W Fortman
15:24:59 11/21/01
(0)
door latch
-
Karl
17:05:15 11/15/01
(1)
Re: door latch
-
Peter Florance
18:31:54 11/15/01
(0)
egr disconnected
-
mike
16:38:28 11/15/01
(0)
where can i find window motor
-
Zach Anderson
15:12:32 11/15/01
(3)
Re: where can i find window motor
-
Steve
11:36:57 11/16/01
(0)
I may have one for you
-
Jeff C
15:29:51 11/15/01
(1)
Re: I may have one for you
-
Zach
08:06:30 11/16/01
(0)
Hey Peter -- The door you ordered is on it's way!
-
Jeff C
14:27:37 11/15/01
(0)
1981 528i-power, but just 1 click on start..help!
-
Nick
12:54:57 11/15/01
(0)
1981 528i-power, but just 1 click on start..help!
-
Nick
12:24:31 11/15/01
(5)
Re: 1981 528i-power, but just 1 click on start..help!
-
Don Daynes
13:44:24 11/15/01
(0)
bad starter solenoid?
-
Peter Florance
13:13:51 11/15/01
(3)
solenoid PN 12 41 1 273 228
-
James
00:04:18 11/16/01
(2)
Re: solenoid PN 12 41 1 273 228
-
Peter Florance
06:24:54 11/16/01
(0)
Re: solenoid PN 12 41 1 273 228
-
Nick
02:04:16 11/16/01
(0)
Need fuel rail schematics / 77 530i
-
Ellis
11:32:26 11/15/01
(0)
215/60/14 or 225/60/14 tires?
-
Walt Barie
10:00:27 11/15/01
(18)
Re: 215/60/15 Yokohama Avid Db's are great !
-
Peter Claassen
17:54:31 11/15/01
(3)
Re: 215/60/15 Yokohama Avid Db's are great !
-
Troy Rudolph
17:20:32 11/16/01
(0)
225/50ZR16's 92W Yoko's
-
jefflee
22:26:32 11/15/01
(1)
Re: 225/50ZR16's 92W Yoko's
-
Peter Florance
06:26:54 11/16/01
(0)
Re: 215/60/14 or 225/60/14 tires?
-
Mark
10:21:22 11/15/01
(13)
Re: 215/60/14 or 225/60/14 tires?
-
Peter Florance
11:48:34 11/15/01
(3)
Re: 215/60/14 or 225/60/14 tires?
-
Walt Barie
12:31:11 11/16/01
(1)
Re: 215/60/14 or 225/60/14 tires?
-
Peter Florance
13:04:01 11/16/01
(0)
Re: 215/60/14 or 225/60/14 tires?
-
Mark
18:40:01 11/15/01
(0)
tire talk, Wietse, what about your car?
-
FLIP
11:01:54 11/15/01
(8)
Re: tire talk, Wietse, what about your car?
-
Eric
17:52:13 11/15/01
(0)
Re: tire talk, Wietse, what about your car?
-
Wietse
13:19:19 11/15/01
(0)
Re: tire talk, Wietse, what about your car?
-
Mark
11:51:04 11/15/01
(5)
OK your getting on a touchy sub.
-
Sam R.
17:44:38 11/15/01
(4)
Re: OK your getting on a touchy sub.
-
Peter Florance
18:30:53 11/15/01
(3)
ok
-
Sam R.
01:31:10 11/17/01
(0)
Re: OK your getting on a touchy sub.
-
Troy Rudolph
17:18:15 11/16/01
(0)
Re: OK your getting on a touchy sub.
-
Mark
18:37:20 11/15/01
(0)
cold start problems
-
Jim Ockner
23:40:49 11/14/01
(8)
fixed - it was the the auz air valve
-
James
09:25:46 11/17/01
(0)
Re: cold start problems
-
Sam R.
17:25:29 11/15/01
(0)
Some ideas?
-
Jim Davis
09:57:35 11/15/01
(0)
Re: cold start problems
-
Jim Davis
09:35:54 11/15/01
(0)
Re: cold start problems
-
Peter Florance
05:41:09 11/15/01
(3)
Re: cold start problems
-
Jim Ockner
12:43:48 11/15/01
(2)
Re: cold start problems
-
Peter Florance
13:10:56 11/15/01
(1)
Thanks, Peter. I'll check it out.
-
Jim Ockner
15:36:16 11/15/01
(0)
Nuisance with etk cd
-
Trubey
23:04:44 11/14/01
(4)
Re: Nuisance with etk cd
-
Dennis
03:19:47 11/15/01
(0)
Re: Nuisance with etk cd
-
Kaveman
23:27:19 11/14/01
(2)
Re: Nuisance with etk cd
-
Don Daynes
00:53:15 11/15/01
(1)
Re: Nuisance with etk cd
-
Kaveman
10:35:05 11/15/01
(0)
Still a prob. with idle
-
Dennis
22:45:40 11/14/01
(4)
Re: Still a prob. with idle
-
Don Daynes
00:58:38 11/15/01
(0)
Re: Still a prob. with idle
-
Kaveman
23:30:31 11/14/01
(2)
Re: Still a prob. with idle
-
Dennis
03:15:23 11/15/01
(1)
Re: Still a prob. with idle
-
Peter Florance
05:37:47 11/15/01
(0)
Not a BMW, but fun to watch.
-
Wietse
21:38:08 11/14/01
(1)
Re: Not a BMW, but fun to watch.
-
Scott
09:11:14 11/15/01
(0)
BMW/Ferarri design sharing
-
Randy McCafferty
20:37:50 11/14/01
(2)
Also said that brakes were shared with Ferrari
-
Lars PNW 81_528i
21:02:59 11/14/01
(0)
Re: BMW/Ferarri design sharing
-
Mark
20:58:19 11/14/01
(0)
Exhaust seup questions
-
Steve Chandler
16:22:22 11/14/01
(7)
Re: Exhaust setup questions
-
Chad Z
12:00:30 11/15/01
(0)
Re: Exhaust seup questions
-
Randy Clark
00:54:06 11/15/01
(1)
Re: Exhaust seup questions
-
Peter Florance
06:03:47 11/15/01
(0)
Re: Exhaust seup questions
-
Trubey
17:25:53 11/14/01
(2)
Re: Exhaust seup questions
-
Scott
21:02:30 11/14/01
(1)
What??? . .
-
Trubey
22:35:10 11/14/01
(0)
Re: Exhaust seup questions
-
Jim Davis
16:37:42 11/14/01
(0)
Help! In desperate need of an E12 Thermal Reactor
-
Manny
16:11:45 11/14/01
(5)
Re: Help! In desperate need of an E12 Thermal Reactor
-
Michael Longeneker
23:44:49 11/14/01
(1)
Re: Help! In desperate need of an E12 Thermal Reactor
-
Randy Clark
00:57:08 11/15/01
(0)
Re: Help! In desperate need of an E12 Thermal Reactor
-
Sam Schultz
19:13:52 11/14/01
(0)
RUN!
-
Sam R.
17:10:55 11/14/01
(0)
Re: Help! In desperate need of an E12 Thermal Reactor
-
Don Daynes
17:00:45 11/14/01
(0)
Off idle studder question
-
Bob
16:00:19 11/14/01
(11)
Re: Off idle studder question
-
Walt Barie
09:55:45 11/15/01
(5)
Re: Off idle studder question
-
Bob
11:19:54 11/15/01
(4)
Re: Off idle studder question
-
Peter Florance
11:50:46 11/15/01
(3)
Thanx to all!!!
-
Bob
13:16:59 11/15/01
(2)
Re: Thanx to all!!!
-
Lenny D.
17:04:53 11/15/01
(0)
Re: Thanx to all!!!
-
Peter Florance
14:47:00 11/15/01
(0)
Re: Off idle studder question
-
Peter Florance
16:23:31 11/14/01
(3)
Frozen advance...
-
Dave Spencer
16:31:10 11/14/01
(2)
Frozen advance...how do you check for this???
-
Bob
18:07:11 11/14/01
(1)
Re: Frozen advance...how do you check for this???
-
Dave Spencer
18:28:25 11/14/01
(0)
Re: Off idle studder question
-
Jim Davis
16:10:30 11/14/01
(0)
320i runner and gas mileage
-
Robert bondi
15:48:44 11/14/01
(0)
And a better memory... here's the link
-
Lars PNW 81_528i
14:18:21 11/14/01
(0)
Maybe old news, but wandered across this site
-
Lars PNW 81_528i
14:17:19 11/14/01
(2)
What site? No link.
-
Luke
19:59:19 11/14/01
(1)
Sorry, saw the next message.
-
Luke
20:00:24 11/14/01
(0)
Test Message - please ignore
-
Jim Davis
13:44:39 11/14/01
(1)
cant...ignore.......must....................open..
-
Scott
15:09:46 11/14/01
(0)
Head light bulb replacement...sugg
-
Scott
11:56:04 11/14/01
(1)
Re: Head light bulb replacement...sugg
-
Don Daynes
12:29:19 11/14/01
(0)
tool kit contents?
-
Charles
11:55:04 11/14/01
(4)
here's a picture of mine
-
FLIP
12:12:56 11/14/01
(3)
Re: here's a picture of mine
-
Charles
12:28:07 11/14/01
(2)
What's the plastic thing on the left?
-
Kevin in Va
13:40:54 11/14/01
(1)
Re: What's the plastic thing on the left?
-
Sam R.
15:37:22 11/14/01
(0)
acknowledgement from other BMW drivers
-
FLIP
10:42:39 11/14/01
(7)
Looks I Get On The Road and More,,,,
-
Jefflee
15:22:02 11/14/01
(0)
Re: acknowledgement from other BMW drivers
-
Troy Rudolph
11:32:39 11/14/01
(0)
Re: acknowledgement from other BMW drivers
-
Chuck Denson
11:20:27 11/14/01
(1)
Re: acknowledgement from other BMW drivers
-
Dave Spencer
12:59:44 11/14/01
(0)
Probably
-
Sam R.
11:11:45 11/14/01
(0)
Re: acknowledgement from other BMW drivers
-
Scott
11:10:46 11/14/01
(0)
Enthusiast..... Means Enthusiastic...
-
Lars PNW 81_528i
11:08:56 11/14/01
(0)
What does " GRAY MARKET CAR" mean?
-
Scott
10:05:05 11/14/01
(6)
Re: What does " GRAY MARKET CAR" mean?
-
Jim Davis
10:18:27 11/14/01
(5)
Re: What does " GRAY MARKET CAR" mean?
-
Trubey
17:20:59 11/14/01
(0)
Re: What does " GRAY MARKET CAR" mean?
-
Scott
10:29:09 11/14/01
(3)
Re: What does " GRAY MARKET CAR" mean?
-
Jim Davis
10:39:10 11/14/01
(2)
Re: What does " GRAY MARKET CAR" mean?
-
Jefflee
14:57:37 11/14/01
(1)
Im in Atlanta Ga ...
-
Scott
15:05:09 11/14/01
(0)
Where can I find window channels?
-
Jim Davis
10:04:47 11/14/01
(5)
Thanks and one more question
-
Jim Davis
15:43:20 11/14/01
(0)
Re: Where can I find window channels?
-
Troy Rudolph
11:29:38 11/14/01
(3)
Re: Where can I find window channels?
-
Jim Davis
12:39:07 11/14/01
(2)
Re: Where can I find window channels?
-
Lenny D.
14:16:51 11/14/01
(0)
Re: Where can I find window channels?
-
Don Daynes
13:04:38 11/14/01
(0)
OEM Clutch for M535i NLA from BMW???????
-
Jefflee
09:55:08 11/14/01
(5)
You need 21 21 9 069 010
-
James
11:29:41 11/15/01
(0)
Re: OEM Clutch for M535i NLA from BMW???????
-
Troy Rudolph
11:45:24 11/14/01
(0)
Maybe BMP?
-
Sam R.
10:14:01 11/14/01
(0)
M6/M5 clutch maybe
-
Peter Florance
10:11:42 11/14/01
(1)
Re: M6/M5 clutch maybe
-
Mark
10:33:41 11/14/01
(0)
e12 passes the car park test
-
Mark
01:33:30 11/14/01
(0)
Moroso Ceramic Engine Seal?
-
Kaveman
23:20:21 11/13/01
(0)
Alpina wheels (To Troy R.)
-
T. Han
23:04:10 11/13/01
(9)
Re: Alpina wheels (To Troy R.)
-
Troy Rudolph
09:35:46 11/14/01
(8)
Re: Alpina wheels (To Troy R.)
-
Frank H
09:53:14 11/14/01
(2)
Re: Alpina wheels (To Troy R.)
-
Troy Rudolph
11:28:27 11/14/01
(1)
Re: Alpina wheels (To Troy R.)
-
Sam R.
11:54:15 11/14/01
(0)
Re: Alpina wheels (To Troy R.)
-
Sam R.
09:49:42 11/14/01
(4)
I have the Offsets
-
Sam R.
09:55:56 11/14/01
(3)
Re: confused
-
Jefflee
12:16:18 11/18/01
(2)
Now tranny rebuild
-
Don Daynes
15:31:37 11/19/01
(1)
5sp/CR Dog-leg rebuilt
-
Jefflee
21:14:41 11/19/01
(0)
Reupholstering seat, help with fabric
-
Luke
22:58:40 11/13/01
(9)
FS: Immaculate dark blue Recaros (Germany)
-
James
00:50:07 11/14/01
(4)
Re: FS: Immaculate dark blue Recaros (Germany)
-
Luke
16:16:56 11/14/01
(0)
Re: FS: Immaculate dark blue Recaros (Germany)
-
FLIP
10:08:25 11/14/01
(2)
Re: FS: Immaculate dark blue Recaros (Germany)
-
James
11:38:21 11/15/01
(1)
Re: FS: Immaculate dark blue Recaros (Germany)
-
FLIP
12:24:45 11/15/01
(0)
Find the upholstery shop that does all the
-
Lars PNW 81_528i
00:16:24 11/14/01
(2)
Re: Find the upholstery shop that does all the
-
Frank H
09:37:00 11/14/01
(1)
Recaro in Germany...
-
James
11:32:51 11/15/01
(0)
Re: Reupholstering seat, help with fabric
-
T. Han
23:32:06 11/13/01
(0)
Pics of repaired/refurbed twin turbo kit for those
-
TCD
19:10:43 11/13/01
(3)
Dare I ask what you're selling it for?
-
FLIP
10:04:36 11/14/01
(1)
Re: Dare I ask what you're selling it for?
-
Scott
10:22:27 11/14/01
(0)
Thats what Im talking bout!!!
-
Scott
20:07:05 11/13/01
(0)
found 3.5 possibly, have question
-
Scott
16:46:46 11/13/01
(3)
Re: found 3.5 possibly, have question
-
Peter Claassen
19:26:39 11/13/01
(2)
Hey Peter C..oneis is a euro..
-
Scott
20:09:34 11/13/01
(1)
Re: Hey Peter C..oneis is a euro..
-
TCD
21:00:18 11/13/01
(0)
Visiting Atlanta
-
Chuck Denson
16:33:59 11/13/01
(1)
Re: Visiting Atlanta
-
Scott
16:42:00 11/13/01
(0)
Drivers school pic
-
Peter Florance
15:22:23 11/13/01
(9)
Re: Drivers school pic
-
Don Daynes
16:02:50 11/13/01
(3)
Re: Drivers school pic
-
Peter Florance
16:48:33 11/13/01
(2)
oh and the knocked down cones...
-
Peter Florance
20:48:32 11/13/01
(1)
correction
-
Peter Florance
21:15:21 11/14/01
(0)
Re: Drivers school pic
-
Scott
15:36:57 11/13/01
(4)
Re: Drivers school pic
-
Peter Florance
15:56:30 11/13/01
(3)
Re: Drivers school pic
-
Scott
16:43:29 11/13/01
(2)
Re: Drivers school pic
-
Peter Florance
16:49:13 11/13/01
(1)
ouch
-
scott
20:03:11 11/13/01
(0)
things for sale
-
David
14:54:56 11/13/01
(2)
everything sold thanks
-
David
10:55:51 11/14/01
(0)
email me for pic eom
-
David
14:56:13 11/13/01
(0)
528i for sale for 2000.00
-
adam
13:38:33 11/13/01
(1)
Re: 528i for sale for 2000.00
-
Luke
14:05:58 11/13/01
(0)
Why cant i find 15 x 7 steel wheels for a 528i
-
matthew
13:23:52 11/13/01
(10)
Re: Why cant i find 15 x 7 steel wheels for a 528i
-
Troy Rudolph
09:31:48 11/14/01
(0)
Re: Why cant i find 15 x 7 steel wheels for a 528i
-
Peter Florance
13:49:53 11/13/01
(8)
Re: Why cant i find 15 x 7 steel wheels for a 528i
-
matt
14:30:23 11/13/01
(7)
Contradiction?
-
Eric
18:48:57 11/13/01
(1)
true, if they are winter wheels...
-
Peter Florance
20:49:28 11/13/01
(0)
Re: Why cant i find 15 x 7 steel wheels for a 528i
-
TCD
16:35:31 11/13/01
(0)
Re: Why cant i find 15 x 7 steel wheels for a 528i
-
Troy Rudolph
15:43:42 11/13/01
(0)
Re: Why cant i find 15 x 7 steel wheels for a 528i
-
Peter Florance
14:56:42 11/13/01
(1)
Re: Why cant i find 15 x 7 steel wheels for a 528i
-
T. Han
23:13:31 11/13/01
(0)
Re: Why cant i find 15 x 7 steel wheels for a 528i
-
matt
14:38:46 11/13/01
(0)
Because I like you guys so much....
-
Trubey
12:37:23 11/13/01
(4)
what about the light?
-
Robert Bondi
13:49:13 11/13/01
(1)
Re: what about the light?
-
Sam R.
14:42:44 11/13/01
(0)
Is this legal in all states?
-
Jim Davis
13:07:42 11/13/01
(1)
Look at it this way...
-
Trubey
18:40:19 11/13/01
(0)
pics of my car with Korman springs & Bilsteins
-
FLIP
10:59:34 11/13/01
(3)
Re: pics of my car with Korman springs & Bilsteins
-
Eric
13:13:06 11/13/01
(2)
I Like the "FIVE" building & placement
-
Kevin McD
14:11:17 11/13/01
(1)
Re: I Like the "FIVE" building & placement
-
mikey
01:30:37 11/14/01
(0)
M535i Clutch assembly
-
Jeff C.
10:32:39 11/13/01
(5)
Hey!!! This is not me.
-
Jeff C
12:01:10 11/13/01
(4)
well there's Jeff C. and there's Jeff C
-
Peter Florance
12:15:02 11/13/01
(3)
Re: well there's Jeff C. and there's Jeff C
-
Jefflee C
13:58:10 11/13/01
(2)
It's me again, the first Jeff C
-
Jeff C
14:08:22 11/13/01
(1)
Like Your Cars
-
Jefflee
15:33:41 11/13/01
(0)
Can Ya'll beat THIS!?!?!
-
Scott
08:43:39 11/13/01
(12)
Re: Can Ya'll beat THIS!?!?!
-
FRED
14:23:17 11/16/01
(0)
Re: Can Ya'll beat THIS!?!?!
-
Frank H
19:59:46 11/13/01
(0)
WHERE AT WHAT STATE ???
-
STAN
15:53:38 11/13/01
(9)
ATLANTA GA BABY!! read this..
-
Scott
20:14:33 11/13/01
(6)
QT Rocks!
-
Dave Spencer
09:41:04 11/14/01
(5)
Re: QT Rocks!
-
Scott
10:26:23 11/14/01
(4)
buy bargain gas? no thanks
-
FLIP
13:39:08 11/14/01
(3)
Yo FLIP! read this....
-
Scott
14:24:52 11/14/01
(2)
Re: Yo FLIP! read this....
-
FLIP
15:35:45 11/14/01
(1)
Re: Yo FLIP! read this....
-
Scott
16:02:56 11/14/01
(0)
Re: WHERE AT WHAT STATE ???
-
Dave Spencer
18:14:14 11/13/01
(1)
OK I got ya beat, just not in a Good way.
-
Sam R.
20:37:55 11/13/01
(0)
update on springs
-
Steven Chandler
00:40:17 11/13/01
(2)
Re: update on springs
-
Troy Rudolph
09:46:35 11/13/01
(0)
Re: update on springs
-
Kaveman
09:26:05 11/13/01
(0)
Euro E12 turn signal
-
Sam R.
23:25:21 11/12/01
(1)
Re: Euro E12 turn signal
-
Don Daynes
10:46:57 11/13/01
(0)
5 speed gearbox problems. Not going into 1st gear.
-
Trubey
23:15:50 11/12/01
(4)
Just a guess, but it was my problem...(long)
-
Dave Spencer
23:36:30 11/12/01
(3)
Re: Just a guess, but it was my problem...(long)
-
T. Han
08:10:34 11/13/01
(2)
Ditto on the long extensions...
-
Dave Spencer
09:07:54 11/13/01
(0)
same problem with my GTI
-
Scott
08:46:51 11/13/01
(0)
Bulletin Board Archives
-
Troy Rudolph (Webmaster)
22:04:33 11/12/01
(1)
thanks Troy
-
Peter Florance
06:38:16 11/13/01
(0)