Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XV

(2002/12/14 - 2002/01/08)

---

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org

---

[ First Fives Home ] [ Board Archives ]

• where is the 02 sensor located? and... - billy isbell 22:27:50 01/08/02 (5)
  • power steering? - Robert Bondi 06:24:16 01/09/02 (0)
  • O2 Sensor - Mr. Coffey 22:38:30 01/08/02 (0)
  • Re: where is the 02 sensor located? and... - Kaveman 22:34:49 01/08/02 (2)
    • easily visible from above? - billy isbell 22:40:11 01/08/02 (1)
      • Re: easily visible from above? - Kaveman 23:12:48 01/08/02 (0)
• Heater control valve - T. Han 22:08:23 01/08/02 (2)
  • Re: Heater control valve - Don Daynes 22:51:56 01/08/02 (0)
  • Re: Heater control valve - Kaveman 22:38:04 01/08/02 (0)
• Still looking to trade my 2002 for your 528i - John in NH 21:38:59 01/08/02 (0)
• Shifting from second to third gear problems - Nathan 20:37:22 01/08/02 (1)
  • Re: Shifting from second to third gear problems - Kaveman 23:43:42 01/08/02 (0)
• knocking strut bearings - osborne 20:14:19 01/08/02 (0)
• 530i hipo. exhaust- 2 into2 or 2 into 1 merge??? - catfish 20:09:14 01/08/02 (2)
  • Re: 530i hipo. exhaust- 2 into2 or 2 into 1 merge??? - Troy Rudolph 20:53:19 01/08/02 (1)
    • Good info, Thanks Troy!(nm) - catfish 22:15:19 01/08/02 (0)
• 3-Way hose-again too! - funfer 18:54:09 01/08/02 (4)
  • 3 port hose: STOP and READ, PLEASE! - Robert Bondi 03:10:30 01/09/02 (1)
    • Well crap! I wish I'd found something.... - funfer 05:22:52 01/09/02 (0)
  • Close but no cigar on that one... - Jim Ockner 02:37:37 01/09/02 (0)
  • Re: 3-Way hose-again too! - Don Daynes 20:13:01 01/08/02 (0)
• Aux Air Valve-Revisited Again! - funfer 18:46:28 01/08/02 (1)
  • alloembmwparts.com is cheapest.... - Jim Ockner 02:41:51 01/09/02 (0)
• 2 528 s for sale - ray 18:41:21 01/08/02 (2)
  • Re: 2 528 s for sale - stewart 01:17:19 01/09/02 (0)
  • More info please - Don Daynes 20:17:15 01/08/02 (0)
• Paging Peter Florance - Martyn Smith 17:21:42 01/08/02 (3)
  • Re: Paging Peter Florance - Peter Florance 17:39:30 01/08/02 (2)
    • I do still have it. Give me a good time - Martyn Smith 18:41:30 01/08/02 (1)
      • Re: I do still have it. Give me a good time - T. Han 22:22:31 01/08/02 (0)
• Heater leak - T.Han 16:06:01 01/08/02 (4)
  • Re: Heater leak - Kaveman 16:50:13 01/08/02 (2)
    • Re: Heater leak - Don Daynes 17:11:47 01/08/02 (1)
      • Re: Heater leak - T.Han 22:17:18 01/08/02 (0)
  • Re: Heater leak - Don Daynes 16:49:25 01/08/02 (0)
• 78 530i springs, shocks & tires, what is the cost? - Collins 13:52:21 01/08/02 (1)
  • reply(kinda long) - stewart 16:00:39 01/08/02 (0)
• What were they thinking? Total kludge hack... - Jim Race 13:29:35 01/08/02 (4)
  • Seen it before. - Carlie Bentley 18:58:56 01/08/02 (1)
    • Re: Seen it before. - T. Han 22:33:34 01/08/02 (0)
  • Re: What were they thinking? Total kludge hack... - Don Daynes 17:07:18 01/08/02 (1)
    • Re: What were they thinking? Total kludge hack... - Jim Race 17:35:24 01/08/02 (0)
• 3-port vac hose....again - Jim Ockner 12:02:51 01/08/02 (1)
  • Look at my post above! - funfer 18:56:21 01/08/02 (0)
• survey: synthetic oil - Robert Bondi 11:40:18 01/08/02 (8)
  • Re: survey: synthetic oil - BIGERIK 21:35:28 01/08/02 (0)
  • Re: survey: synthetic oil - Jim 18:24:06 01/08/02 (0)
  • Re: survey: synthetic oil - mikey 16:04:11 01/08/02 (0)
  • Moly - Chad 12:52:07 01/08/02 (2)
    • Re: Moly - Frank H 16:09:03 01/08/02 (0)
    • Molybdinum Disulde - slippery stuff (babble) - Dean 14:14:00 01/08/02 (0)
  • Redline, if you have the scratch - Adam Wilson 12:02:26 01/08/02 (0)
  • Re: survey: synthetic oil - Carlie Bentley 11:48:37 01/08/02 (0)
• FS: Euro Bumpers $475 - TCD 09:47:14 01/08/02 (1)
  • Re: FS: Euro Bumpers $475 - stewart 16:08:10 01/08/02 (0)
• Rust Prevention - Patrick Goss 08:37:59 01/08/02 (3)
  • Rust requires Oxygen. Boiled Linseed Oil costs - Lars BendOr e12z 21:03:58 01/08/02 (1)
    • PS> Boiled... Not Raw.. You buy it boiled. - Lars 21:09:21 01/08/02 (0)
  • Re: Rust Prevention - T. Han 15:58:02 01/08/02 (0)
• !!!!78 530i NEEDS HELP!!!! - Brent 07:45:05 01/08/02 (1)
  • I'll give it a shot. (Heck yes it's long) - Carlie Bentley 11:27:26 01/08/02 (0)
• Lambda Conversion, where to start - Nathan 00:36:46 01/08/02 (4)
  • working on updating the lambda FAQ right now - Robert Bondi 07:07:18 01/08/02 (2)
    • See if you can collaborate with Peter F, please. - Troy Rudolph (Webmaster) 19:58:35 01/08/02 (1)
      • I think Peter Florance knows.... - Robert Bondi 02:31:43 01/09/02 (0)
  • Re: Lambda Conversion, where to start - Robert Bondi 04:20:40 01/08/02 (0)
• Idleing low - Nathan 00:31:36 01/08/02 (7)
  • Re: Idleing low - Peter Florance 06:09:07 01/08/02 (6)
    • Re: Idleing low - Derek 09:13:04 01/08/02 (5)
      • Re: Idleing low - Peter Florance 10:16:14 01/08/02 (4)
        • Re: Idleing low - Derek 14:41:53 01/08/02 (3)
          • Re: Idleing low - Peter Florance 15:09:43 01/08/02 (2)
            • Re: Idleing low - Lou Lazo 21:04:12 01/08/02 (1)
              • great idea - Peter Florance 07:10:29 01/09/02 (0)
• Is this normal? - Nathan 00:29:46 01/08/02 (5)
  • No it isn't normal. - Carlie Bentley 11:56:23 01/08/02 (2)
    • just to add another thought - Adam Wilson 16:15:02 01/08/02 (0)
    • Flasher Switch - Derek 14:33:40 01/08/02 (0)
  • Re: Is this normal? - Derek 09:16:55 01/08/02 (0)
  • Re: Is this normal? - stewart 00:40:30 01/08/02 (0)
• Aux Air Valve-Revisited - funfer 21:46:14 01/07/02 (3)
  • Aux Air Valve-Revisited-oops! - funfer 21:48:37 01/07/02 (2)
    • Re: Aux Air Valve-Revisited-oops! - Kaveman 23:03:05 01/07/02 (1)
      • Exactly what I thought! Thanks! - funfer 08:13:46 01/08/02 (0)
• drivers side tail light - Dale 19:09:40 01/07/02 (6)
  • Do the 530i tail lights fit? - TCD 22:06:00 01/07/02 (1)
    • Re: Do the 530i tail lights fit? - Troy Rudolph 22:10:37 01/07/02 (0)
  • alway the drivers side tail light, never passenger - Chuck Denson 21:23:34 01/07/02 (2)
    • Re: alway the drivers side tail light, never passenger - Robert Iverach 12:42:40 01/08/02 (0)
    • I've wondered too. - Carlie Bentley 12:00:52 01/08/02 (0)
  • Have one and , , , - Jefflee 21:01:37 01/07/02 (0)
• Suspension rebuilt question - Gene S 18:58:58 01/07/02 (5)
  • Re: Suspension rebuilt question - Don Daynes 10:49:05 01/08/02 (1)
    • Re: Suspension rebuilt question - Gene S 18:00:48 01/08/02 (0)
  • Re: Suspension rebuilt question - Chuck Denson 21:28:59 01/07/02 (2)
    • Re: Suspension rebuilt question - Gene S 17:59:49 01/08/02 (0)
    • Re: Suspension rebuilt question - Gene S 17:58:02 01/08/02 (0)
• 1977 530i - Horn Dawg 17:41:14 01/07/02 (5)
  • 1978 530i with 3 speed auto. - Carlie Bentley 11:41:20 01/08/02 (1)
    • Re: 1978 530i with 3 speed auto. - Jim Hartwell 21:18:10 01/08/02 (0)
  • Re: 1977 530i - Jeff C 08:04:40 01/08/02 (0)
  • Re: 1977 530i - Dave Spencer 07:40:41 01/08/02 (0)
  • Re: 1977 530i - Bill Bowes 06:28:30 01/08/02 (0)
• O2 Sensor "Lag"........ - Kaveman 17:22:36 01/07/02 (6)
  • Two sensors on throttle-body that - Jefflee 17:52:54 01/08/02 (0)
  • 2-cents worth , maybe 2-cents , , , - Jefflee 20:55:19 01/07/02 (2)
    • Re: 2-cents worth , maybe 2-cents , , , - Kaveman 23:08:57 01/07/02 (0)
    • Also have an E-12,,,read above (nt) - Jefflee 20:58:00 01/07/02 (0)
  • Re: O2 Sensor "Lag"........ - Peter Florance 20:10:05 01/07/02 (0)
  • Re: O2 Sensor "Lag"........ - Jim Ockner 17:34:26 01/07/02 (0)
• Windows - not responding - Tarik Obeidi 17:12:24 01/07/02 (3)
  • Re: Windows - not responding - T. Han 00:33:01 01/08/02 (0)
  • Re: Windows - not responding - Peter Florance 20:00:29 01/07/02 (0)
  • Common problem... try Linux - Dave Spencer 18:35:31 01/07/02 (0)
• Funfer & The 3-port Vac Hose - Jim Ockner 16:53:41 01/07/02 (4)
  • Re: Funfer & The 3-port Vac Hose - Robert Bondi 04:06:47 01/08/02 (0)
  • Re: Funfer & The 3-port Vac Hose - Kaveman 17:42:05 01/07/02 (1)
    • there is at least 1 more 3 port hose - Robert Bondi 04:02:28 01/08/02 (0)
  • I ordered on e today... - funfer 17:02:29 01/07/02 (0)
• 3.5 born today - HimiZoli 14:58:16 01/07/02 (2)
  • Feel the power ! - Peter Claassen 16:21:56 01/07/02 (0)
  • congratulations! - mikey 15:56:37 01/07/02 (0)
• Garage Sale! E12 Parts! - MIke Pugh 14:07:08 01/07/02 (0)
• Anyone interested in a Euro Instrument Cluster? - funfer 12:57:24 01/07/02 (0)
• expecting new Bimmer arrival in a few months - Adam Wilson 12:38:23 01/07/02 (1)
  • Re: expecting new Bimmer arrival in a few months - Peter Florance 12:45:02 01/07/02 (0)
• Every panel on my E12 was keyed this weekend (m) - Dean 12:00:59 01/07/02 (7)
  • Re: Every panel on my E12 was keyed this weekend (m) - MR. not-nice-guy 01:26:29 01/09/02 (0)
  • Sounds like SF needs... - Bill Bowes 06:22:23 01/08/02 (0)
  • Re: Every panel on my E12 was keyed this weekend (m) - T.Han 13:44:25 01/07/02 (0)
  • Mirror donation - Mark Phillips 13:38:47 01/07/02 (0)
  • It's like This, $&#T happens in life for - Scott 12:28:09 01/07/02 (0)
  • awful story, so sorry to hear that - Adam Wilson 12:23:38 01/07/02 (1)
    • I agree and I don't - Lars BendOr e12z 12:48:46 01/07/02 (0)
• weekend report - Chuck Denson 10:57:12 01/07/02 (2)
  • new back up light switch? - Robert Bondi 12:03:13 01/07/02 (1)
    • Re: new back up light switch? - Chuck Denson 15:17:12 01/07/02 (0)
• strobing turn signals, resolution - Adam Wilson 10:09:11 01/07/02 (0)
• Good weekend at the Salvage Yard - Patrick Goss 09:36:09 01/07/02 (5)
  • E22 wheels...Really??? - Patrick Goss 09:43:47 01/07/02 (4)
    • Re: E22 wheels...Really??? - Eric 18:33:11 01/07/02 (0)
    • Re: E22 wheels...Really??? - Eric 18:32:56 01/07/02 (0)
    • Re: E22 wheels...Really??? - Troy Rudolph 13:29:36 01/07/02 (1)
      • Re: E22 wheels...Really??? - Patrick Goss 14:32:25 01/07/02 (0)
• Free: 1976 530i owner's manual - TCD 09:23:19 01/07/02 (3)
  • Re: Free: 1976 530i owner's manual - Derek 10:24:29 01/07/02 (0)
  • Re: Free: 1976 530i owner's manual - Scott 09:35:48 01/07/02 (1)
    • No ship/handle for you Scott!! - TCD 09:43:41 01/07/02 (0)
• FS: Pair of polished aluminum mirrors $25 - TCD 08:05:57 01/07/02 (1)
  • Sold. - TCD 16:10:26 01/07/02 (0)
• 78 530i Needs Good Home! - Brent 07:37:12 01/07/02 (0)
• Members Cars in "Gallery" - Troy Rudolph (Webmaster) 01:01:14 01/07/02 (0)
• Seat Question - Mr. Coffey 00:36:34 01/07/02 (5)
  • Re: Seat Question - Mishast 19:32:16 01/07/02 (0)
  • Re: Seat Question - dieter 11:16:57 01/07/02 (0)
  • Re: Seat Question - steve Chandler 10:22:13 01/07/02 (0)
  • Re: Seat Question - Peter Florance 06:35:34 01/07/02 (0)
  • Re: Seat Question - Dale 01:42:06 01/07/02 (0)
• Paging Don Daynes; Vented Rear Upgrade - Jim Hineline 23:43:21 01/06/02 (7)
  • Re: Paging Don Daynes; Vented Rear Upgrade - Troy Rudolph 11:54:14 01/07/02 (2)
    • Talked to MM - Jim Hineline 14:22:59 01/07/02 (1)
      • Re: Talked to MM - Don Daynes 14:58:47 01/07/02 (0)
  • Vented Rear Upgrade - ...tom 11:12:36 01/07/02 (2)
    • Re: Vented Rear Upgrade - Don Daynes 11:43:18 01/07/02 (1)
      • Re: Vented Rear Upgrade - Jim Hineline 13:29:55 01/07/02 (0)
  • Re: Paging Don Daynes; Vented Rear Upgrade - Don Daynes 10:48:22 01/07/02 (0)
• FS: Wiper relay for E12 - Chandler Ogden 21:10:47 01/06/02 (1)
  • Hey! Welcome back! - Troy Rudolph 13:33:10 01/07/02 (0)
• Moments of Insanity... Decent 81 528i for Sale. - Lars BendOr e12z 20:40:15 01/06/02 (2)
  • Re: Moments of Insanity... Decent 81 528i for Sale. - Jim Hineline 23:54:28 01/06/02 (1)
    • That's the one. - Lars BendOr e12z 00:04:53 01/07/02 (0)
• Intake Valve Sizes for M30? - Dave Rutkowski 20:30:55 01/06/02 (1)
  • Re: Intake Valve Sizes for M30? - Troy Rudolph 11:59:22 01/07/02 (0)
• ATTN: Ron Welton - Chad Z 18:21:24 01/06/02 (3)
  • His car is the OEM color Arctisblau Met. - Lars BendOr e12z 01:32:02 01/08/02 (0)
  • He may not see your inquiry - Lars BendOr e12z 20:28:05 01/06/02 (1)
    • Thank you Lars - Chad Z 21:28:34 01/06/02 (0)
• Interchangeability of Aux Air Valve - funfer 18:03:27 01/06/02 (13)
  • Re: Interchangeability of Aux Air Valve - Kaveman 19:43:04 01/06/02 (10)
    • What I have.... - funfer 20:08:39 01/06/02 (0)
    • I got a 3 way just 3 days ago! Another Question... - funfer 20:04:33 01/06/02 (7)
      • Re: I got a 3 way just 3 days ago! Another Question... - Kaveman 20:47:27 01/06/02 (1)
        • Check this post... - Dave Spencer 22:12:08 01/06/02 (0)
    • I'm in ATL! - Robert Bondi 20:45:19 01/06/02 (4)
      • Peter Florance - 3 port vac hose - Robert Bondi 22:48:16 01/06/02 (3)
        • Re: Peter Florance - 3 port vac hose - funfer 09:07:04 01/07/02 (0)
        • Re: Peter Florance --top: 29378-->
        • How do I e-mail pics?(not e12 related) - Ryan Bryan 18:53:15 01/06/02 (1)
          • Re: How do I e-mail pics?(not e12 related) - stewart 02:18:45 01/07/02 (0)
• Are headlamps 5 1/2 or 5 3/4 inches? eom - stewart 06:28:27 01/06/02 (1)
  • Got Ruler ? ? ? (nt) - Carpenter 11:32:38 01/06/02 (0)
• L-jetronic problem (6-series) - Tommy 03:43:31 01/06/02 (1)
  • Re: L-jetronic problem (6-series) - Karl 16:34:28 01/07/02 (0)
• Performance Upgrade Questions - Adam Alexander (Cincinnati) 00:32:26 01/06/02 (2)
  • Re: Performance Upgrade Questions - Carlie Bentley 05:02:32 01/07/02 (0)
  • 528i FI System - Peter Florance 08:42:13 01/06/02 (0)
• 4HP 22 auto & e12 - Mark 00:03:33 01/06/02 (0)
• Still having problems with 81 528i - Jonnie T. 23:53:03 01/05/02 (3)
  • Re: Still having problems with 81 528i - Peter Florance 08:31:41 01/06/02 (2)
    • Re: Still having problems with 81 528i - Jonnie T. 11:30:35 01/06/02 (1)
      • any other e12 owners in Ontario, Canada? - Peter Florance 19:11:43 01/06/02 (0)
• rear end(diff.) interchangability???? - Ryan Bryan 22:01:56 01/05/02 (6)
  • Ryan, I have a 3.64 diff for $50. - TCD 22:27:29 01/05/02 (5)
    • Re: Ryan, I have a 3.64 diff for $50. - Ryan Bryan 10:02:04 01/06/02 (4)
      • Re: Ryan, I have a 3.64 diff for $50. - TCD 13:06:16 01/06/02 (3)
        • 81'528 5-speed... - Ryan Bryan 13:17:21 01/06/02 (2)
          • Re: 81'528 5-speed... - Frank H 13:37:45 01/06/02 (0)
          • Re: 81'528 5-speed... - TCD 13:23:39 01/06/02 (0)
• Garage Sale!!!! E12 Parts - Mike Pugh 13:57:43 01/05/02 (4)
  • Re: Garage Sale!!!! E12 Parts - stewart 00:25:57 01/06/02 (1)
    • Re: Garage Sale!!!! E12 Parts - MIke Pugh 10:15:37 01/06/02 (0)
  • Re: Garage Sale!!!! E12 Parts - Randy C 22:14:51 01/05/02 (1)
    • Re: Garage Sale!!!! E12 Parts - Mike Pugh 10:17:20 01/06/02 (0)
• Car of the Month - January - Troy Rudolph (Webmaster) 10:42:49 01/05/02 (6)
  • Re: Car of the Month - January - Randy C 22:13:45 01/05/02 (0)
  • did somebody borrow my car... - Robert Bondi 15:32:55 01/05/02 (0)
  • Re: Car of the Month - January - Canadian Bimmer 15:10:33 01/05/02 (1)
    • Re: Car of the Month - January - mike 22:04:56 01/06/02 (0)
  • I can't get it - Chad Z 13:44:24 01/05/02 (0)
  • Re: Car of the Month - January - Beamher Bob 11:35:07 01/05/02 (0)
• lambda success: O2 sensor (long) - Robert Bondi 05:33:25 01/05/02 (7)
  • that is great news! i have shipped one - mikey 13:47:11 01/05/02 (3)
    • Mikey: Can you offer advice on the bad idle? - Jim / Robert Bondi 14:28:10 01/05/02 (2)
      • Re: Mikey: Can you offer advice on the bad idle? - bimmer71 07:31:50 01/07/02 (1)
        • hows the timing? - mikey 07:34:15 01/07/02 (0)
  • CONGRATS ROBERT!!! I cant wait to go - Scott 13:19:24 01/05/02 (1)
    • heading back today on I-20 (nt) - Robert Bondi 15:16:09 01/05/02 (0)
  • FYI -- our car has Stahl tubular steel headers ... - Jim Bondi 12:38:27 01/05/02 (0)
• 530i running hot after Lambda conversion - solved! - Jim / Robert Bondi 01:35:25 01/05/02 (2)
  • more comments - Robert Bondi 05:14:08 01/05/02 (1)
    • Re: more comments - Peter Florance 07:33:17 01/05/02 (0)
• Aftermarket Guages - Nathan 00:10:17 01/05/02 (3)
  • The Gauge Man - Robert Bondi 05:00:34 01/05/02 (2)
    • Re: The Gauge Man - Patrick 06:53:37 01/05/02 (1)
      • Re: The Gauge Man - Robert Bondi 15:37:52 01/05/02 (0)
• Kaveman..need more info on the seats... - Mike 22:42:33 01/04/02 (2)
  • Re: Kaveman..need more info on the seats... - Kaveman 13:42:12 01/05/02 (1)
    • Re: Kaveman..need more info on the seats... - Mike 18:41:22 01/05/02 (0)
• couple of questions, pretty long, sorry - Dennis 20:51:56 01/04/02 (10)
  • U-Haul - Chuck Denson 01:36:48 01/05/02 (3)
    • Re: U-Haul - Trubey 08:47:47 01/05/02 (2)
      • Re: U-Haul - Chuck Denson 12:18:32 01/05/02 (1)
        • Shift damage... - Dave Spencer 10:04:57 01/06/02 (0)
  • thats what I was hopeing to hear - Dennis 23:19:17 01/04/02 (0)
  • Re: couple of questions, pretty long, sorry - Kaveman 22:31:52 01/04/02 (0)
  • Re: couple of questions, pretty long, sorry - Peter Florance 21:00:22 01/04/02 (3)
    • Re: couple of questions, pretty long, sorry - Dennis 23:39:33 01/05/02 (0)
    • I Don't Know if this is . . . . - Jefflee 21:31:46 01/04/02 (1)
      • Yeah...! What he said... - Dave Spencer 21:58:55 01/04/02 (0)
• FS: '81 3.5l euro motor,tranny, ecu....1600.oo$ - adam 18:37:25 01/04/02 (0)
• 4HP22. Why no Kickdown? - TexasTim 15:29:38 01/04/02 (3)
  • Re: 4HP22. Why no Kickdown? - Troy Rudolph (Webmaster) 15:57:39 01/04/02 (2)
    • Just E24 guy fishin' for info-thanks. - TexasTim 08:14:42 01/05/02 (1)
      • Re: Just E24 guy fishin' for info-thanks. - Troy Rudolph 10:38:55 01/05/02 (0)
• Looking for "cat-back" freeflow set up for 530i - Catfish 15:28:06 01/04/02 (1)
  • Re: Looking for "cat-back" freeflow set up for 530i - steve chandler 23:07:56 01/06/02 (0)
• Trunk seal replacement - Catfish 15:25:41 01/04/02 (1)
  • Re: Trunk seal replacement - Michael Longeneker 18:03:22 01/04/02 (0)
• Intake runner gaskets... - Lenny D. 13:07:44 01/04/02 (5)
  • Re: Intake runner gaskets... - Dave Spencer 21:52:20 01/04/02 (1)
    • And... - Dave Spencer 21:53:29 01/04/02 (0)
  • Re: Intake runner gaskets... - T. Han 15:41:45 01/04/02 (2)
    • Re: Intake runner gaskets... - Karl 20:37:31 01/04/02 (0)
    • Re: Intake runner gaskets... - Bill Barrett 19:42:13 01/04/02 (0)
• Question for Jim Hineline - Martin Schwartz 09:28:09 01/04/02 (1)
  • Re: Question for Jim Hineline - Jim Hineline 09:54:49 01/04/02 (0)
• Bosch 4220 spark plugs (cont'd from post below) - Jim / Robert Bondi 00:19:37 01/04/02 (3)
  • initial results with WR9DP plugs - Robert Bondi 19:03:50 01/04/02 (0)
  • Re: Bosch 4220 spark plugs (cont'd from post below) - Troy Rudolph 13:54:30 01/04/02 (1)
    • Platinums -----Watch Out !!! - Jefflee 17:19:21 01/04/02 (0)
• Need help with wheels-which are these? - funfer 21:17:17 01/03/02 (8)
  • Re: Need help with wheels-which are these? - Troy Rudolph 13:51:43 01/04/02 (0)
  • Picture of the wheels... - funfer 05:49:31 01/04/02 (4)
    • Re: Picture of the wheels... - Carlie Bentley 14:52:57 01/04/02 (0)
    • Re: Picture of the wheels... - T. Han 10:28:04 01/04/02 (2)
      • Re: Picture of the wheels... - funfer 12:30:18 01/04/02 (1)
        • Yes, I remember a thread a while back - Martyn Smith 12:52:15 01/04/02 (0)
  • Re: Need help with wheels-which are these? - T.Han 00:01:47 01/04/02 (0)
  • Re: Need help with wheels-which are these? - T. Han 23:57:24 01/03/02 (0)
• Yoko AVS-DB in snow - Peter Florance 19:48:34 01/03/02 (0)
• e12 Alpinia wheels 16" FS on 'other board' - Ryan Bryan 19:30:46 01/03/02 (1)
  • great wheels but OH MY lotsa $$$$$$$$$$$ - mikey 20:12:02 01/03/02 (0)
• Should Lambda converion make engine run hotter? - Jim / Robert Bondi 18:57:49 01/03/02 (4)
  • My E9 runs much colder (than with Zenith carbs)EOM - Chris 19:56:23 01/03/02 (0)
  • Re: Should Lambda converion make engine run hotter? - mikey 19:34:17 01/03/02 (2)
    • Re: Should Lambda converion make engine run hotter? - Peter Florance 19:46:22 01/03/02 (1)
      • 3/4 on gauge - Robert Bondi 20:55:16 01/03/02 (0)
• Bosch Plug 4220 for Lambda conversion ? - Jim / Robert Bondi 16:59:51 01/03/02 (14)
  • Re: Bosch Plug 4220 for Lambda conversion ? - Jim Hineline 23:03:16 01/03/02 (1)
    • Question for Jim Hineline - Martin Schwartz 09:24:59 01/04/02 (0)
  • Re: Bosch Plug 4220 for Lambda conversion ? - Kaveman 20:34:16 01/03/02 (0)
  • Re: Bosch Plug 4220 for Lambda conversion ? - Troy Rudolph 17:18:29 01/03/02 (10)
    • You recommend Bosch "W9DS" or "WR9DS"? - Jim Bondi 18:09:46 01/03/02 (2)
      • R is for resistor I believe: Same plug - Jefflee 18:15:56 01/03/02 (1)
        • W9DS - Troy Rudolph 18:36:24 01/03/02 (0)
    • Re: Bosch Plug 4220 for Lambda conversion ? - Jim Bondi 17:27:27 01/03/02 (6)
      • check Mesa for Bosch plugs (more) - Peter Florance 19:45:00 01/03/02 (2)
        • Plugs - Troy Rudolph 20:01:03 01/03/02 (1)
          • Re: Plugs - Troy Rudolph 20:03:40 01/03/02 (0)
      • Plugs - - Jefflee 18:25:11 01/03/02 (0)
      • Re: Bosch Plug 4220 for Lambda conversion ? - Jim Bondi 17:32:25 01/03/02 (1)
        • The one for the coil. (eom) - Troy Rudolph 18:39:37 01/03/02 (0)
• rough running 528i - sometimes - RLW 14:52:48 01/03/02 (6)
  • Re: rough running 528i - sometimes - Ellis 04:58:50 01/05/02 (1)
    • Re: rough running 528i - sometimes - Patrick 06:52:06 01/05/02 (0)
  • Re: rough running 528i - sometimes - Peter Florance 15:13:10 01/03/02 (3)
    • Re: rough running 528i - sometimes - Troy Rudolph 17:13:35 01/03/02 (0)
    • Re: rough running 528i - sometimes - RLW 15:27:37 01/03/02 (1)
      • Re: rough running 528i - sometimes - Peter Florance 15:47:24 01/03/02 (0)
• BBS front spoiler on Ebay in Germany - Trubey 14:44:25 01/03/02 (0)
• FS: 1980 5 Spd. - Chuck Denson 12:55:30 01/03/02 (0)
• Trying to keep it cool... - Dave Spencer 10:58:55 01/03/02 (6)
  • Re: Trying to keep it cool... - Troy Rudolph 11:21:24 01/03/02 (5)
    • Did exactly that... - Dave Spencer 13:05:48 01/03/02 (4)
      • Re: Did exactly that... - Troy Rudolph 13:15:06 01/03/02 (3)
        • Dohhhh!!!! - Dave Spencer 21:42:36 01/03/02 (2)
          • Re: Dohhhh!!!! - Peter Florance 06:31:55 01/04/02 (1)
            • Point being: no need to worry until Spring? - Trubey 08:53:22 01/05/02 (0)
• nickle and dime rage.(long of course) - Carlie Bentley 09:55:45 01/03/02 (7)
  • I FEEEEEELLLLLL your paaaaaaiiiiiiiiiiinnnnnn and - Jefflee 11:51:28 01/03/02 (0)
  • I'm with ya'(unfortunately )eom - Mark Phillips 11:48:47 01/03/02 (5)
    • Re: I'm with ya'(unfortunately )eom - T. Han 15:14:13 01/03/02 (4)
      • About the NLA - Matt B 00:32:40 01/04/02 (3)
        • Matt, how about that Munich address - Peter Florance 06:34:09 01/04/02 (2)
          • Like... - Dave Spencer 09:09:32 01/04/02 (1)
            • 1271 604 v3 - Chuck Denson 10:55:05 01/04/02 (0)
• Lambda conversion question - Mike M/'78 530i 09:32:02 01/03/02 (1)
  • don't worry about pumps - Peter Florance 11:56:43 01/03/02 (0)
• Fun inthe Snow (pics from NC) - Sam Schultz 08:40:49 01/03/02 (0)
• Dumped my oil :( - Sam Schultz 08:38:42 01/03/02 (1)
  • Re: Dumped my oil :( - T. Han 09:07:02 01/03/02 (0)
• now I've really done it - Dennis 22:42:20 01/02/02 (2)
  • Re: now I've really done it - Dennis 09:12:03 01/03/02 (0)
  • Re: now I've really done it - Peter Florance 06:46:19 01/03/02 (0)
• debt consolidation loans, credit card debt managem - b 22:08:20 01/02/02 (1)
  • this does have a use... - spaminator 02:20:54 01/03/02 (0)
• Coolant worry wart - T.Han 22:08:09 01/02/02 (0)
• Hazard light flashes when right signal is on - Brian Esslinger 19:31:55 01/02/02 (2)
  • Re: Hazard light flashes when right signal is on - Chuck Denson 01:13:09 01/03/02 (1)
    • Re: Hazard light flashes when right signal is on - T. Han 09:24:27 01/03/02 (0)
• Part 4 sale - Mark Phillips 16:14:41 01/02/02 (0)
• Cam timing marks - Peter Zol 15:36:56 01/02/02 (0)
• Injecors from Autozone... - Lenny D. 15:22:08 01/02/02 (8)
  • Re: Injectors - Troy Rudolph 11:12:04 01/03/02 (0)
  • Not to sound too harsh or snobby... - Scott 15:41:25 01/02/02 (6)
    • Re: Not to sound too harsh or snobby... - Dennis 22:32:50 01/02/02 (0)
    • More on autozone - Trubey 17:40:47 01/02/02 (0)
    • Re: Not to sound too harsh or snobby... - Peter Florance 17:04:59 01/02/02 (3)
      • Re: Not to sound too harsh or snobby... - Lenny D. 17:50:20 01/02/02 (2)
        • I have a parts source you may be interested in - Adam Wilson 11:12:09 01/03/02 (0)
        • The bosch injectors are less than $70 - Martyn Smith 00:24:37 01/03/02 (0)
• Does anyone have a cooland tank for sale? - Martyn Smith 13:28:45 01/02/02 (3)
  • Re: Does anyone have a cooland tank for sale? - JURASSICDEAN 14:38:25 01/02/02 (0)
  • "coolant" i mean, Bad day.......... (eom) - Martyn Smith 13:30:32 01/02/02 (1)
    • replacement tank - Dennis 23:27:01 01/04/02 (0)
• What weight oil should I run? - Patrick Goss 13:25:10 01/02/02 (1)
  • Re: What weight oil should I run? - JURASSICDEAN 14:41:58 01/02/02 (0)
• Source for a parts CD, or anyone selling? - Martyn Smith 13:09:15 01/02/02 (2)
  • Re: Source for a parts CD, or anyone selling? - James 03:26:46 01/03/02 (0)
  • Re: Source for a parts CD, or anyone selling? - JURASSICDEAN 14:42:54 01/02/02 (0)
• E12 M535i parts (seats, bumper, 5 speed ...) - James 13:01:43 01/02/02 (2)
  • Re: E12 M535i parts (seats, bumper, 5 speed ...) - Klaus Wiehl 15:12:41 01/02/02 (1)
    • Re: E12 M535i parts (seats, bumper, 5 speed ...) - James 03:14:49 01/03/02 (0)
• trip report - greghill 10:40:58 01/02/02 (0)
• I'm tempted to call myself a mechanic...(sarcasm) - Martyn Smith 10:39:16 01/02/02 (6)
  • my observations (long) - Adam Wilson 12:32:43 01/02/02 (4)
    • Re: my observations (long) - Lenny D. 14:06:52 01/02/02 (3)
      • clairification on soldering iron use - Peter Florance 15:14:59 01/02/02 (2)
        • Re: clairification on soldering iron use - Lenny D. 18:08:33 01/02/02 (1)
          • injector.com, flow testing - Adam Wilson 10:00:40 01/03/02 (0)
  • Re: I'm tempted to call myself a mechanic...(sarcasm) - Peter Florance 10:59:06 01/02/02 (0)
• Parting 1976 Korman 530i euro bumpers, Alpina, Har - TCD 09:32:40 01/02/02 (11)
  • Re: Parting 1976 Korman 530i euro bumpers, Alpina, Har - Catfish 15:21:55 01/04/02 (1)
    • Sold it with the engine. - TCD 19:29:32 01/04/02 (0)
  • where are you? EOM - mikey 10:48:21 01/02/02 (2)
    • Waxhaw, NC 28173 near Charlotte - TCD 10:55:41 01/02/02 (1)
      • Re: Waxhaw, NC 28173 near Charlotte - JamesB 20:37:48 01/04/02 (0)
  • What Happened, why are you parting? - Jim Hineline 10:30:55 01/02/02 (1)
    • Rust and will not pass emissions! - TCD 10:55:13 01/02/02 (0)
  • His interior is SWEET, I would get it but the - Scott 10:19:33 01/02/02 (1)
    • The wheels are on the 745i. - TCD 10:54:39 01/02/02 (0)
  • I'm interested, check email. (eom) - Mark80528i 10:00:59 01/02/02 (0)
  • Picture of the car. - TCD 09:35:16 01/02/02 (0)
• To: Colin Web site: Por-15 tank seal. - Joe 09:25:11 01/02/02 (1)
  • Re: To: Colin Web site: Por-15 tank seal. - Catfish 15:23:05 01/04/02 (0)
• Limerick challenge... - T. Han 03:08:48 01/02/02 (6)
  • I 'll give it a try...... - Beamher Bob 11:02:57 01/02/02 (4)
    • That was great! (nt) - Scott 12:50:45 01/02/02 (0)
    • wow, that post made my day. Fantastic! (eom) - Adam Wilson 12:34:13 01/02/02 (0)
    • Forget fixing old bimmers... - Martyn Smith 12:02:08 01/02/02 (1)
      • Re: Forget fixing old bimmers... - T. Han 14:31:30 01/02/02 (0)
  • Re: Limerick challenge... - Steve Chandler 10:44:21 01/02/02 (0)
• House Cleaning - Jim Hineline 01:21:40 01/02/02 (8)
  • Speakers Gone - Jim Hineline 10:53:47 01/03/02 (0)
  • Re: House Cleaning - Dennis 22:24:35 01/02/02 (0)
  • Re: House Cleaning - Jeff 19:57:33 01/02/02 (2)
    • Re: House Cleaning - Jim Hineline 10:56:28 01/03/02 (1)
      • Re: House Cleaning - Jeff 11:31:44 01/03/02 (0)
  • Re: House Cleaning - TroyRudolph 10:26:42 01/02/02 (2)
    • Re: House Cleaning - Jim Hineline 10:54:22 01/02/02 (1)
      • Re: House Cleaning - Troy Rudolph 11:45:20 01/02/02 (0)
• Frankenstein - Troy Rudolph 00:40:01 01/02/02 (2)
  • Troy!?!?!?!?!??!? - Scott 08:05:10 01/02/02 (1)
    • a little temptation....... - G Mendez 01:47:24 01/04/02 (0)
• I WISH IT WAS A CHEVY! - Brent 22:42:35 01/01/02 (6)
  • Re: I WISH IT WAS A CHEVY! - Peter Florance 06:36:55 01/02/02 (2)
    • Re: I WISH IT WAS A CHEVY! - Mike 08:56:13 01/02/02 (1)
      • Re: I WISH IT WAS A CHEVY! - Peter Florance 09:10:57 01/02/02 (0)
  • Re: I WISH IT WAS A CHEVY! - Mr. Coffey 02:33:29 01/02/02 (0)
  • Re: I WISH IT WAS A CHEVY! - Dennis 00:51:51 01/02/02 (0)
  • Could you please stop shouting? - Emily Post 22:48:45 01/01/02 (0)
• FS: LIKE NEW 530i Injectors, cleaned, flowrated - Chris 19:54:11 01/01/02 (5)
  • Re: FS: LIKE NEW 530i Injectors, cleaned, flowrated - Dennis 20:36:09 01/04/02 (0)
  • Re: FS: LIKE NEW 530i Injectors, cleaned, flowrated - brent 22:31:19 01/01/02 (0)
  • Re: FS: LIKE NEW 530i Injectors, cleaned, flowrated - Lenny D. 22:10:13 01/01/02 (2)
    • Carl Nelson Personally Removed Them - Chris 00:21:25 01/02/02 (0)
    • Re: FS: LIKE NEW 530i Injectors, cleaned, flowrated - Troy Rudolph 22:54:58 01/01/02 (0)
• window motor - Zach 18:37:03 01/01/02 (2)
  • Re: window motor - JURASSICDEAN 14:46:45 01/02/02 (0)
  • Re: window motor - Erich M_SCAL81/633 10:06:49 01/02/02 (0)
• NEX Seats?.... Heard of Em'? - Kaveman 17:09:37 01/01/02 (4)
  • Re: NEX Seats?.... Heard of Em'? - Mike 08:50:24 01/02/02 (0)
  • Re: NEX Seats?.... Heard of Em'? - Mr. Coffey 19:02:05 01/01/02 (2)
    • Re: NEX Seats?.... Heard of Em'? - Kaveman 19:14:28 01/01/02 (0)
    • More... - Mr. Coffey 19:09:53 01/01/02 (0)
• ...almost too embarrased to ask but... - Lenny D. 16:20:35 01/01/02 (12)
  • Re: ...almost too embarrased to ask but... - mikey 10:55:52 01/02/02 (0)
  • Re: ...almost too embarrased to ask but... - Ryan Bryan 21:53:32 01/01/02 (1)
    • Re: ...almost too embarrased to ask but... - Lenny D. 22:05:21 01/01/02 (0)
  • What do you mean 'nicked the barb' and , , , - Jefflee 19:21:01 01/01/02 (8)
    • Re: What do you mean 'nicked the barb' and , , , - Lenny D. 19:34:10 01/01/02 (7)
      • Re: What do you mean 'nicked the barb' and , , , - Peter Florance 06:43:32 01/02/02 (2)
        • Re: What do you mean 'nicked the barb' and , , , - Jim Hartwell 21:23:08 01/03/02 (0)
        • Re: What do you mean 'nicked the barb' and , , , - Lenny D. 13:45:58 01/02/02 (0)
      • Re: What do you mean 'nicked the barb' and , , , - RichArt 20:28:33 01/01/02 (1)
        • Re: What do you mean 'nicked the barb' and , , , - Lenny D. 22:07:19 01/01/02 (0)
      • ...and of course I used a NEW piece of BMW hose nt - Lenny D. 19:36:08 01/01/02 (1)
        • I see , , , , ,,,,,,,,,,,,,,,,,,,,,,,,,,,(nt) - Jefflee 19:38:04 01/01/02 (0)
• Addatives - Nathan 16:10:15 01/01/02 (3)
  • Try a product called "BG44K"... - Timmer 16:33:23 01/01/02 (2)
    • Re: Try a product called "BG44K"... - Derek 12:41:56 01/02/02 (1)
      • Derek,It's listed on "bobsautowerks.com".. - Timmer 13:15:06 01/02/02 (0)
• A Happy and Prosperous New Year for us all - Dennis 09:32:59 01/01/02 (0)
• 745i vs 528i - Mark 05:18:39 01/01/02 (4)
  • I own both a 745i and 530i with a Korman motor - TCD 07:55:13 01/01/02 (3)
    • Perhaps a later 745i? - Mark 09:52:11 01/01/02 (2)
      • Mine is a L-Jet 1982 3.2L with auto and 3.07 diff - TCD 10:07:19 01/01/02 (1)
        • Re: Mine is a L-Jet 1982 3.2L with auto and 3.07 diff - Mark 11:57:52 01/01/02 (0)
• Part needed: Shifter Linkage from ZF 3hp22 tranny - Martin Schwartz 16:35:02 12/31/01 (4)
  • Re: Part needed: Shifter Linkage from ZF 3hp22 tranny - Jim Hineline 20:27:22 01/01/02 (3)
    • Re: Part needed: Shifter Linkage from ZF 3hp22 tranny - Martin Schwartz 12:53:29 01/02/02 (2)
      • Re: Part needed: Shifter Linkage from ZF 3hp22 tranny - Jim Hineline 15:30:22 01/02/02 (1)
        • Re: Part needed: Shifter Linkage from ZF 3hp22 tranny - Martin Schwartz 16:39:16 01/02/02 (0)
• Clean car for sale - Chuck Denson 09:33:06 12/31/01 (0)
• 1979 528i in autotrader ads.. - Timmer 07:03:23 12/31/01 (0)
• Factory Manual - Don Daynes 02:07:52 12/31/01 (0)
• 530i FI upgrade to Lambda -- mystery black wire ?? - Robert Bondi / Jim Bondi 00:34:45 12/31/01 (7)
  • Re: 530i FI upgrade to Lambda -- mystery black wire ?? - Jim Ockner 02:05:56 12/31/01 (3)
    • Re: 530i FI upgrade to Lambda -- mystery black wire ?? - Jim/Robert Bondi 02:18:44 12/31/01 (2)
      • AC input wire - Peter Florance 06:14:51 12/31/01 (1)
        • Thanks - some lambda follow up - Robert Bondi 17:24:36 12/31/01 (0)
  • Goes to Distributor - Chris 02:00:27 12/31/01 (0)
  • Re: 530i FI upgrade to Lambda -- mystery black wire ?? - mikey 01:29:00 12/31/01 (1)
    • Re: 530i FI upgrade to Lambda -- mystery black wire ?? - Jim/Robert Bondi 02:41:05 12/31/01 (0)
• Friendly reminder - T. Han 22:35:19 12/30/01 (5)
  • Re: Friendly reminder/ and 13hrs of rally - Scott 09:48:40 12/31/01 (0)
  • No danger of that here - Peter Florance 06:19:07 12/31/01 (0)
  • Re: Friendly reminder & Happy New Year! - Kaveman 23:24:20 12/30/01 (0)
  • Re: Friendly reminder - Dave Spencer 23:17:38 12/30/01 (0)
  • Re: Friendly reminder - Sam R. 22:53:44 12/30/01 (0)
• Short-shifter from E-21 to M535i - Jefflee 21:28:56 12/30/01 (0)
• Problem with 6 inch braided strap,,,,again - Jefflee 21:18:50 12/30/01 (3)
  • Sounds like a Rube Goldberg approach to ground - Lars BendOr e12z 22:30:34 12/30/01 (1)
    • That appears to be where the braided , , , - Jefflee 22:43:54 12/30/01 (0)
  • Re: Problem with 6 inch braided strap,,,,again - T. Han 22:22:15 12/30/01 (0)
• NC get together? - Chuck Denson 20:49:53 12/30/01 (8)
  • Re: NC get together? - wilbert ollison 08:10:42 01/01/02 (0)
  • Greenville sounds great to me... - Ryan Bryan 17:21:24 12/31/01 (0)
  • Re: NC get together? - Robert Bondi 17:11:06 12/31/01 (0)
  • Sounds good, but I'll have to bring the 745i. - TCD 15:53:40 12/31/01 (0)
  • Re: NC get together? - Steve Chandler 07:15:02 12/31/01 (0)
  • Re: NC get together? - JamesB 01:12:51 12/31/01 (0)
  • Re: NC get together? - Scott 20:53:27 12/30/01 (1)
    • Re: NC get together? - Sam Schultz 21:29:42 12/30/01 (0)
• Has anyone sealed their gas tank? - Catfish 20:31:06 12/30/01 (6)
  • I did POR-15 it is awesome - Joe hahn 20:26:16 12/31/01 (0)
  • Re: Has anyone sealed their gas tank? - mikey 12:33:22 12/31/01 (1)
    • Re: Has anyone sealed their gas tank? - Peter Florance 14:49:28 12/31/01 (0)
  • Re: Has anyone sealed their gas tank? - Jim Ockner 02:27:36 12/31/01 (0)
  • Re: Has anyone sealed their gas tank? - mikey 01:41:53 12/31/01 (1)
    • Re: Has anyone sealed their gas tank? - catfish 18:40:26 01/01/02 (0)
• 3.46 lsd - JamesB 18:22:55 12/30/01 (3)
  • Re: 3.46 lsd - Scott 20:38:00 12/30/01 (0)
  • Re: 3.46 lsd - stewart 20:16:59 12/30/01 (1)
    • Re: 3.46 lsd - JamesB 23:57:02 12/30/01 (0)
• re: parts/suppliers - Dennis 17:05:21 12/30/01 (3)
  • Re: re: parts/suppliers - Bernie Aguilar 19:40:35 12/30/01 (0)
  • check the Links section - Peter Florance 17:10:56 12/30/01 (1)
    • Duh - Dennis 19:29:07 12/30/01 (0)
• Rear Diff Mount - funfer 16:52:41 12/30/01 (1)
  • Re: Rear Diff Mount - Peter Florance 17:13:38 12/30/01 (0)
• Brake Master Cylinder went bad - funfer 16:49:04 12/30/01 (0)
• Our Tool Kits KICK A$$!!!! I replaced my - Scott 15:56:13 12/30/01 (0)
• NO ACCELERATION - BRENT 15:41:59 12/30/01 (0)
• NO ACCELERATION - BRENT 15:41:39 12/30/01 (2)
  • Re: NO ACCELERATION - Randy C 15:20:14 12/31/01 (0)
  • Re: NO ACCELERATION - Peter Florance 17:04:17 12/30/01 (0)
• VACUUM HOSE HELP - BRENT 15:37:34 12/30/01 (1)
  • Re: VACUUM HOSE HELP - Dennis 17:12:45 12/30/01 (0)
• now this is sad! - mikey 13:25:34 12/30/01 (1)
  • Re: now this is sad! - Peter Florance 17:18:00 12/30/01 (0)
• pre-'81 Cracked Heads - Dave Rutkowski 12:56:24 12/30/01 (4)
  • Re: pre-'81 Cracked Heads - David B 14:24:12 01/01/02 (0)
  • Re: pre-'81 Cracked Heads - raymon 15:32:21 12/30/01 (1)
    • Re: pre-'81 Cracked Heads - T. Han 21:59:36 12/30/01 (0)
  • Re: pre-'81 Cracked Heads - Mark 15:18:07 12/30/01 (0)
• 4 to 6 pistons wanted: 3.5L (euro preferred) - Josh Cook 12:41:03 12/30/01 (0)
• 528is for sale to a good home - raymon 12:18:35 12/30/01 (1)
  • Re: 528is for sale to a good home - Dennis 17:17:30 12/30/01 (0)
• Pre-loading center bearing ???????? - Jefflee 11:49:57 12/30/01 (2)
  • Re: Pre-loading center bearing ???????? - mikey 13:06:08 12/30/01 (1)
    • Thanks Mickey (nt) - Jefflee 14:33:13 12/30/01 (0)
• E12ers in Fresno? - Nathan 23:24:55 12/29/01 (1)
  • Re: E12ers in Fresno? - Michael Longeneker 01:45:59 12/30/01 (0)
• Power door locks - Nathan 23:23:35 12/29/01 (4)
  • Similar problems here... - Dave Spencer 11:13:03 12/30/01 (1)
    • Re: Similar problems here... - Peter Florance 13:20:20 12/30/01 (0)
  • Re: Power door locks - Peter Florance 07:36:53 12/30/01 (0)
  • Re: Power door locks - Michael Longneker 01:40:09 12/30/01 (0)
• Vanishing Point - The Movie - Jim Hartwell 23:04:59 12/29/01 (13)
  • Previous owner of Mopars , , , a list - Jefflee 11:40:09 12/30/01 (3)
    • '66 Valiant won shooting pool & drove x country - Bill Barrett 21:58:43 12/30/01 (0)
    • Re: Previous owner of Mopars , , , a list - Troy Rudolph 16:23:38 12/30/01 (0)
    • '53 New Yorker... - Dave Spencer 15:49:45 12/30/01 (0)
  • 68'charger - Dennis 11:39:28 12/30/01 (0)
  • Re: Vanishing Point - The Movie - Kaveman 10:50:57 12/30/01 (0)
  • Those were the days... 440 CI in a Pllymouth GTX - Lars BendOr 10:19:34 12/30/01 (0)
  • No replacement for displacemant! Nice frankenstei - JB 01:14:15 12/30/01 (0)
  • E23 with Mopar Power - Troy Rudolph 23:25:51 12/29/01 (4)
    • Re: E23 with Mopar Power - Jim Hartwell 23:39:32 12/29/01 (3)
      • Re: E23 with Mopar Power - Mark 11:34:38 12/30/01 (2)
        • Re: E23 with Mopar Power - Jim Hartwell 12:19:28 12/30/01 (1)
          • Re: E23 with Mopar Power - Mark 02:12:16 12/31/01 (0)
• exhuast parts needed - Jon DeVos 22:53:18 12/29/01 (2)
  • Re: exhuast parts needed - JURASSICDEAN 14:50:26 01/02/02 (0)
  • Re: exhuast parts needed - Troy Rudolph 23:16:12 12/29/01 (0)
• 3.46 lsd - JamesB 22:44:43 12/29/01 (0)
• Chrome Window Trim Replacement Question - Bob N. 20:21:02 12/29/01 (2)
  • Re: Chrome Window Trim Replacement Question - T. Han 10:33:15 12/30/01 (1)
    • Re: Chrome Window Trim Replacement Question - mike 19:46:41 12/30/01 (0)
• '81 528i question - Jonnie T. 19:48:34 12/29/01 (1)
  • Re: '81 528i question - Chris 20:59:03 12/29/01 (0)
• AFM question - Dennis 19:35:44 12/29/01 (7)
  • Re: AFM question - Don Daynes 00:09:25 12/31/01 (1)
    • thanks Don - Dennis 01:06:36 12/31/01 (0)
  • please clarify - dennis 16:58:33 12/30/01 (3)
    • Re: please clarify - Peter Florance 17:16:32 12/30/01 (2)
      • Re: please clarify - Dennis/dennis 19:43:11 12/30/01 (1)
        • no, your making progress - Peter Florance 20:42:01 12/30/01 (0)
  • Re: AFM question - Randy C 12:40:01 12/30/01 (0)
• hoses of doom - Chuck Denson 19:06:58 12/29/01 (0)
• Now She's purring! - funfer 18:12:10 12/29/01 (1)
  • check email on wheels (eom) - billy isbell 19:13:14 12/29/01 (0)
• Restoration Specialties & Supply Part Numbers - Randy Clark 14:51:59 12/29/01 (3)
  • Re: Restoration Specialties & Supply Part Numbers - Randy C 12:41:44 12/30/01 (0)
  • Re: Restoration Specialties & Supply Part Numbers - Lenny D. 01:23:06 12/30/01 (0)
  • Try this number also Paging Fred Sures - Peter Florance 15:45:58 12/29/01 (0)
• Euro Motor Questions - Dave Rutkowski 14:38:41 12/29/01 (1)
  • Re: Euro Motor Questions - Jefflee 16:41:30 12/29/01 (0)
• generic source for windshield washer hose? - Peter Florance 10:53:06 12/29/01 (4)
  • Re: generic source for windshield washer hose? - Dave Spencer 16:21:49 12/29/01 (3)
    • Could you make all of us beer straws Dave? - Jefflee 16:44:16 12/29/01 (2)
      • Funny you should mention it... - Dave Spencer 17:52:26 12/29/01 (1)
        • Smuggling beer from Oklahoma , , , - Jefflee 09:44:32 12/30/01 (0)
• Catalytic Converter for 79 528i - Jimi 09:33:13 12/29/01 (2)
  • Free Cat in VAncouver, BC - Chris 21:01:27 12/29/01 (0)
  • Re: Catalytic Converter for 79 528i - Troy Rudolph 13:40:06 12/29/01 (0)
• 80 528 197k how long will fuel pumps last? - Doug S. 09:01:04 12/29/01 (1)
  • Re: 80 528 197k how long will fuel pumps last? - Randy C 12:32:02 12/29/01 (0)
• Silver 528 outside the Salvation Army in Fresno? - Michael Longeneker 00:59:19 12/29/01 (0)
• alternator - JamesB 20:44:20 12/28/01 (3)
  • 90 amp from e23 - Trubey 17:00:13 12/29/01 (0)
  • Re: alternator - Medfly 10:12:09 12/29/01 (0)
  • Re: alternator - Chuck Denson 23:50:55 12/28/01 (0)
• Radio Capacitor question for Kaveman - Erich M_SCAL81/633 20:38:06 12/28/01 (3)
  • Re: Radio Capacitor question for Kaveman - Peter Florance 06:33:25 12/29/01 (2)
    • Re: Radio Capacitor question for Kaveman - Kaveman 15:16:53 12/29/01 (1)
      • also.. - Peter Florance 15:47:32 12/29/01 (0)
• M 30 Head And Intake For Sale - Jim 20:07:49 12/28/01 (0)
• www.e12.de - Dave Spencer 18:49:13 12/28/01 (0)
• Still more problems, please advise! - Martyn Smith 14:52:42 12/28/01 (3)
  • Re: Still more problems, please advise! - Dennis 21:36:35 12/28/01 (0)
  • Re: Still more problems, please advise! - Randy C 19:29:39 12/28/01 (0)
  • I hate to ask this... - Peter Florance 15:52:39 12/28/01 (0)
• E12 repairs coming along... - funfer 08:34:26 12/28/01 (1)
  • sounds like we have a Georgia get together - Ryan Bryan 14:53:15 12/28/01 (0)
• Starter won't let go. - Mark80528i 07:54:32 12/28/01 (8)
  • Re: Starter won't let go. - T. Han 12:19:29 12/28/01 (7)
    • Re: Starter won't let go. - greghill 15:58:16 12/28/01 (6)
      • You might... - Dave Spencer 17:35:10 12/28/01 (5)
        • Get yourself an S-wrench or a C-wrench , , , - Jefflee 18:12:40 12/28/01 (4)
          • Re: Get yourself an S-wrench or a C-wrench , , , - Kaveman 18:50:06 12/28/01 (0)
          • Ahhhh... Now I remember... - Dave Spencer 18:29:35 12/28/01 (2)
            • What? Beer helps the starter, I have mixed - Scott 18:54:32 12/28/01 (1)
              • Re: What? Beer helps the starter, I have mixed - T. Han 23:52:32 12/28/01 (0)
• Tumblers? - Steve Chandler 07:18:07 12/28/01 (5)
  • Re: Tumblers + ? - greghill 16:01:39 12/28/01 (4)
    • I'd try some graphite first like on door locks (nt - Jefflee 18:14:37 12/28/01 (3)
      • enlighten me please - Steve Chandler 21:42:29 12/28/01 (2)
        • Re: enlighten me please - Chuck Denson 00:35:42 12/29/01 (1)
          • WD-40 is god-like and , , , - Jefflee 11:41:19 12/29/01 (0)
• FI question for Peter Florance - Robert Bondi 07:04:52 12/28/01 (3)
  • Re: FI question for Peter Florance - Peter Florance 07:09:55 12/28/01 (2)
    • another question - injector resistors - Robert Bondi 19:10:26 12/28/01 (1)
      • no it's ok - Peter Florance 19:39:20 12/28/01 (0)
• Jacking it Up! - Jim Hartwell 20:53:13 12/27/01 (3)
  • OT, Excellent Flick, definetly top 20! I like .. - Scott 12:04:59 12/28/01 (0)
  • Re: Jacking it Up! - Karl 06:01:42 12/28/01 (1)
    • Re: Jacking it Up! - Jim Hartwell 22:30:59 12/29/01 (0)
• Sad News - '80 528i Totaled - Harold 20:45:09 12/27/01 (3)
  • Happy Story - Karl 06:14:20 12/28/01 (0)
  • Same thing happened to me April - Fred Fermin 01:24:35 12/28/01 (0)
  • Re: Sad News - '80 528i Totaled - Chuck Denson 00:17:41 12/28/01 (0)
• Anyone have a driver side front side marker/turn - Martyn Smith 18:48:54 12/27/01 (2)
  • Anyone parting out an E12? anyone!?!?? busted mine - Martyn Smith 10:39:09 12/28/01 (1)
    • I Do! Where are you? - Beamher Bob 10:02:20 12/29/01 (0)
• Differences between early and late m30 heads? - Bill Barrett 17:28:31 12/27/01 (1)
  • Re: Differences between early and late m30 heads? - Troy Rudolph 17:49:43 12/27/01 (0)
• Fuel Pump Follow up Attn Peter - Martyn Smith 16:56:13 12/27/01 (6)
  • AND is this in tank pump - Martyn Smith 17:00:50 12/27/01 (5)