Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XVII

(2002/02/03 - 2002/03/10)

---

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• 81 528i - raymon 17:56:00 03/10/02 (0)
• Heater Hoses Size, Standard? - Joe Hood 17:55:52 03/10/02 (0)
• Anyone wanna sell a 5spd shift Plate?? - Scott 13:32:43 03/10/02 (0)
• FS> 3.45 LSD - Scott 13:11:37 03/10/02 (0)
• Timing Procedure - CGW 13:09:20 03/10/02 (4)
  • Re: Timing Procedure (long) - Peter Florance 13:18:41 03/10/02 (1)
    • Re: Timing Procedure (long) - CGW 13:30:07 03/10/02 (0)
  • Re: Timing Procedure - CGW 13:13:18 03/10/02 (1)
    • Re: Timing Procedure...just one point - Bill Barrett 14:15:32 03/10/02 (0)
• loud noise - Matt 22:21:40 03/09/02 (1)
  • Re: loud noise - Peter Florance 09:12:01 03/10/02 (0)
• Blue Door Pockets? - Troy Rudolph 19:46:13 03/09/02 (3)
  • How about Blue Seat Vynl? - Patrick Goss 14:04:53 03/10/02 (1)
    • Sorry no seats...... nt - Catfish 15:41:36 03/10/02 (0)
  • Re: Blue Door Pockets? I do, Dark Blue... - Catfish 01:34:40 03/10/02 (0)
• OMG!!! TCD's Car is soooo fast..I went (long) - Scott 19:16:38 03/09/02 (0)
• does any body know where i could get some - e28 17:55:29 03/09/02 (1)
  • I hear hollywood boulevard's a good place! NT - Chadz 19:06:46 03/09/02 (0)
• hey does anyone know where i can get some cheap - evil28 17:53:14 03/09/02 (2)
  • Please read this - Troy Rudolph (Webmaster) 19:43:41 03/09/02 (0)
  • Re: hey does anyone know where i can get some cheap - Chuck Denson 19:03:30 03/09/02 (0)
• at long last, another one bites the dust... - ...tom 15:56:56 03/09/02 (5)
  • stuff from the car - ...tom 18:49:00 03/09/02 (1)
    • Re: stuff from the car - BIGERIK 00:22:25 03/10/02 (0)
  • Re: blue door pockets? - Troy Rudolph 16:47:30 03/09/02 (1)
    • Re: blue door pockets? - Catfish 23:03:09 03/09/02 (0)
  • I need a black map holder, driver's side ???? nt - Jefflee 16:29:59 03/09/02 (0)
• wires and relay in steering column - ...tom 15:46:59 03/09/02 (1)
  • Re: wires and relay in steering column - Steve C. 16:32:49 03/10/02 (0)
• sunroof problems gone ..sort of - John in NH 13:44:36 03/09/02 (0)
• 3.07 Sideloader 4-sale on, , , , , ,,, - Jefflee 12:59:54 03/09/02 (0)
• BMW intake port design - Bill Barrett 11:57:56 03/09/02 (3)
  • ARRRGH!! dont tell me its ported too???? - Scott 19:19:58 03/09/02 (2)
    • Re: ARRRGH!! dont tell me its ported too???? - Bill Barrett 19:39:28 03/09/02 (1)
      • Keep me posted! (lucky %&^,mumblegrumble) - Scott 19:47:17 03/09/02 (0)
• Off the club driver's school - Peter Florance 05:10:55 03/09/02 (0)
• 2 thumbs up for STI igniton wires - John in NH 20:44:03 03/08/02 (9)
  • Re: cold air intake - Chad Z 19:16:48 03/09/02 (1)
    • Re: cold air intake - Steve C. 10:20:33 03/10/02 (0)
  • Re: 2 thumbs up for STI igniton wires - T.Han 23:02:28 03/08/02 (0)
  • please elaborate! - Chuck Denson 22:37:26 03/08/02 (5)
    • Re: please elaborate! ..ok but kinda long - John in NH 23:25:00 03/08/02 (4)
      • Re: Two things I forgot to mentnion - John in NH 23:51:08 03/08/02 (3)
        • Re: Here's their United States address.. - John in NH 09:35:17 03/09/02 (2)
          • Re: Here's their United States address.. - Kaveman 10:07:05 03/09/02 (1)
            • Re: Yep ..those are the ones ..good find (nt) - John in NH 13:35:33 03/09/02 (0)
• Anyone running headers on Euro motors??....... - Catfish 20:19:52 03/08/02 (2)
  • Re: Anyone running headers on Euro motors??....... - Bill Barrett 08:39:18 03/09/02 (1)
    • Thanks Bill..... nt - Catfish 11:00:37 03/09/02 (0)
• Busy Boy. Anybody got an AFM?? Bosch # , , , - Jefflee 18:35:59 03/08/02 (4)
  • Re: Busy Boy. Anybody got an AFM?? Bosch # , , , - Kaveman 19:04:35 03/08/02 (3)
    • get it - Peter Florance 05:02:50 03/09/02 (2)
      • I've searched high & low for the adjustment , , , - Jefflee 11:02:06 03/09/02 (1)
        • Re: I've searched high & low for the adjustment , , , - Peter Florance 19:41:59 03/09/02 (0)
• Adjustment of AFM Flap (door). Has anyone , , , - Jefflee 18:24:48 03/08/02 (1)
  • Re: Adjustment of AFM Flap (door). Has anyone , , , - Gene S 13:25:47 03/09/02 (0)
• What are the benefits of a cold air intake? - John in NH 16:45:10 03/08/02 (3)
  • More power because... - Kevin Kew 20:23:15 03/08/02 (2)
    • Re: A DAQ on the FAQ on this topic... - John in NH 22:29:09 03/08/02 (0)
    • Re: Thanks for the short and sweet explanation nt - John in NH 20:32:42 03/08/02 (0)
• NEW Large Tool Kit -- $162.50 US$ out of , , , - Jefflee 15:52:28 03/08/02 (0)
• K-MAC Adjustable Strut Bearing - Troy Rudolph 15:36:15 03/08/02 (14)
  • Re: K-MAC Adjustable Strut Bearing - David B 02:55:06 03/09/02 (0)
  • Re: K-MAC Adjustable Strut Bearing - Don Daynes 16:01:00 03/08/02 (8)
    • Re: K-MAC Adjustable Strut Bearing - Troy Rudolph 16:42:40 03/08/02 (7)
      • Re: K-MAC Adjustable Strut Bearing - billy 18:33:23 03/08/02 (6)
        • Re: K-MAC Adjustable Strut Bearing - Troy Rudolph 19:10:11 03/08/02 (5)
          • Site is not gone and is at - Jefflee 20:01:14 03/08/02 (4)
            • Re: That's not it. - Troy Rudolph 20:34:13 03/08/02 (3)
              • BMW AG - Chuck Denson 22:32:28 03/08/02 (2)
                • Re: BMW AG - Troy Rudolph 14:24:29 03/09/02 (1)
                  • Hot Rod Sidney - Jim Hineline 23:16:44 03/09/02 (0)
  • Re: K-MAC Adjustable Strut Bearing - Peter Florance 15:41:44 03/08/02 (3)
    • Re: K-MAC Adjustable Strut Bearing - David B 02:38:25 03/09/02 (2)
      • Re: K-MAC Adjustable Strut Bearing - Peter Florance 09:51:41 03/10/02 (0)
      • Alignment shops don't have the man-power or , , , - Jefflee 11:23:01 03/09/02 (0)
• Adam has graciuosly hosted a few pics of my car... - Scott 14:12:00 03/08/02 (6)
  • Car of the Mid-Month? (Nice wheatfield) LOL - Jefflee 16:01:55 03/08/02 (2)
    • Hey don't mess with wheatfields! - Chad Z 16:59:13 03/08/02 (1)
      • Hey Chad. Sell me your car before you go to , , - Jefflee 18:14:23 03/08/02 (0)
  • Re: Adam has graciuosly hosted a few pics of my car... - Mr. Coffey 15:46:49 03/08/02 (2)
    • Thanks for the compliments..I want to finish it - Scott 15:55:43 03/08/02 (1)
      • Finish It?!?!? HA!!! - Mr. Coffey 18:24:55 03/08/02 (0)
• 528i carburetor??? - Steve Greco 13:56:09 03/08/02 (1)
  • Re: 528i carburetor??? - Mark 23:57:35 03/08/02 (0)
• Anybody host a couple of new pics of my car?? - Scott 11:59:00 03/08/02 (2)
  • Re: Anybody host a couple of new pics of my car?? - Troy Rudolph (Webmaster) 13:29:32 03/08/02 (1)
    • Thanks Troy that pic stunk..U r The man!!! nt - Scott 13:43:29 03/08/02 (0)
• Any tricks for removing fenders.. - Lars BendOr e12z 10:09:29 03/08/02 (1)
  • Re: Any tricks for removing fenders.. - Karl 08:29:36 03/09/02 (0)
• Adam's tool kit - T.Han 09:10:50 03/08/02 (2)
  • Inside Trunk Lid Covering? - Kevin McD 11:17:36 03/08/02 (0)
  • great, thanks! I was wondering about that - Adam Wilson 10:52:56 03/08/02 (0)
• 1976 bmw 528 carburator - romesh emmanuel 06:35:25 03/08/02 (3)
  • Re: 1976 bmw 528 carburator - Chuck Denson 10:37:50 03/08/02 (0)
  • Which Carburetor do you need - Lars BendOr e12z 09:47:32 03/08/02 (1)
    • Solex/Zenith 35/40 INAT - Mark 12:08:07 03/08/02 (0)
• FAQ Article Posted - Troy Rudolph 22:43:16 03/07/02 (0)
• Fundraiser? - DScott 20:33:15 03/07/02 (3)
  • Re: Fundraiser? - Eric Q 18:45:19 03/08/02 (1)
    • Re: Fundraiser? - DScott 12:08:56 03/09/02 (0)
  • Re: Fundraiser? - Greg 22:00:18 03/07/02 (0)
• Can anyone part with a check valve and booster hos - Scott 19:38:14 03/07/02 (4)
  • Picked one up for you this morning! - TCD 11:50:59 03/08/02 (1)
    • You go Boy!!! - Scott 11:55:09 03/08/02 (0)
  • Re: Can anyone part with a check valve and booster hos - Peter Florance 20:00:48 03/07/02 (1)
    • Re: Can anyone part with a check valve and booster hos - Peter Florance 20:01:25 03/07/02 (0)
• Car Sputters Occasionally - Steve D 18:36:34 03/07/02 (4)
  • Re: Car Sputters Occasionally -LONG - Derek 10:23:41 03/08/02 (0)
  • Re: Car Sputters Occasionally - DScott 20:50:53 03/07/02 (0)
  • Re: Car Sputters Occasionally - Peter Florance 19:22:44 03/07/02 (1)
    • also, how old is the fuel filter?? nt - Scott 19:40:32 03/07/02 (0)
• BMW Original Roof Rack.....??? - Kaveman 18:23:19 03/07/02 (1)
  • BTW: BMW Part# 82 12 9 413 110 for the rack..... - Kaveman 18:27:06 03/07/02 (0)
• Serious Work To Do Now !!!!! - Jefflee 18:05:22 03/07/02 (7)
  • Could not find AFM FAQ for spring adjustment???? - Jefflee 23:55:47 03/07/02 (3)
    • Re: Could not find AFM FAQ for spring adjustment???? - Peter Florance 06:26:51 03/08/02 (2)
      • Re: Could not find AFM FAQ for spring adjustment???? - Kaveman 10:10:38 03/08/02 (1)
        • Thank You Guys. I was not going to , , , - Jefflee 10:55:53 03/08/02 (0)
  • Re: Serious Work To Do Now !!!!! - Jake Hall 19:06:31 03/07/02 (1)
    • Re: Serious Work To Do Now !!!!! - Karl 08:35:30 03/09/02 (0)
  • Re: Serious Work To Do Now !!!!! - Kaveman 18:15:12 03/07/02 (0)
• headers - matthew 17:48:23 03/07/02 (1)
  • Re: headers - Kaveman 18:18:30 03/07/02 (0)
• seeking 5-speed conversion.... - P-driver 16:14:23 03/07/02 (1)
  • Re: seeking 5-speed conversion.... - Sam Schultz 16:20:44 03/07/02 (0)
• FPR question - blair 15:02:45 03/07/02 (0)
• ATTN PETER F!!! read this.................... - Scott 14:54:10 03/07/02 (1)
  • check your email - Peter Florance 17:03:34 03/07/02 (0)
• Toolkit FAQ posted - Peter Florance 14:33:42 03/07/02 (3)
  • Not playing favorites here, but we could do this - Lars BendOr e12z 16:58:45 03/07/02 (0)
  • Re: Toolkit FAQ posted - Nice Job ! - Peter Claassen 16:30:17 03/07/02 (1)
    • I've asked for a quote and should have it soon. - Jefflee 17:37:58 03/07/02 (0)
• Real Brainy Q - How does O2 sensor work?? - Catfish 13:09:31 03/07/02 (0)
• Quaife, MM box, other parts FS... - Catfish 11:31:57 03/07/02 (10)
  • Re: Quaife follow up - Paul Cain 12:41:42 03/08/02 (0)
  • Re: Quaife, MM box, other parts FS... - Eric Q 18:46:51 03/07/02 (0)
  • Re: Quaife, MM box, other parts FS... - Raj 15:24:30 03/07/02 (0)
  • Re: Quaife, MM box, other parts FS... - Troy Rudolph 11:57:58 03/07/02 (0)
  • Re: Quaife, MM box, other parts FS... - Kaveman 11:39:58 03/07/02 (5)
    • Re: Quaife, MM box, other parts FS... - Catfish 11:48:29 03/07/02 (4)
      • Re: Quaife, MM box, other parts FS... - Kaveman 13:17:39 03/07/02 (3)
        • Muffler - Catfish 20:28:12 03/07/02 (2)
          • Re: Muffler - Kaveman 10:13:59 03/08/02 (1)
            • I'll do that..Thanks..... - Catfish 20:09:59 03/08/02 (0)
• Spark Plugs from Autolite - Patrick Goss 09:51:01 03/07/02 (4)
  • Actually... - Kevin Kew 17:36:29 03/07/02 (0)
  • Does anyone still use Champion plugs?? and - Jefflee 11:55:14 03/07/02 (1)
    • Re: Does anyone still use Champion plugs?? and - Kaveman 13:21:05 03/07/02 (0)
  • Re: Spark Plugs from Autolite - Peter Florance 11:33:42 03/07/02 (0)
• Boring Out Bavaria Manifold Question - Tools!!! - Patrick Goss 09:47:32 03/07/02 (4)
  • Re: Boring Out Bavaria Manifold Question - Tools!!! - Jeff 20:01:48 03/07/02 (1)
    • Re: Boring Out Bavaria Manifold Question - Tools!!! - Jeff 20:53:06 03/07/02 (0)
  • Re: Boring Out Bavaria Manifold Question - Tools!!! - Kaveman 19:27:36 03/07/02 (0)
  • Re: Boring Out Bavaria Manifold Question - Tools!!! - Karl 16:25:04 03/07/02 (0)
• Re:header insulation wrap or equivalent - richard lizardi 09:00:43 03/07/02 (2)
  • Re:header insulation wrap or equivalent - Kaveman 11:41:22 03/07/02 (0)
  • Careful..some wraps will expodite the header - Scott 09:21:21 03/07/02 (0)
• Lockmotor FAQ updated - Peter Florance 07:18:37 03/07/02 (1)
  • Re: Lockmotor FAQ updated. Thanks! - Mark80528i 12:32:55 03/07/02 (0)
• Q about Euro manifolds..... - Catfish 21:11:00 03/06/02 (5)
  • Re: Q about Euro manifolds..... - Frank H 21:23:26 03/06/02 (3)
    • BTW is the manifold different??? nt - Catfish 21:32:01 03/06/02 (1)
      • Re: BTW is the manifold different??? nt - Frank H 21:43:30 03/06/02 (0)
    • Thanks for the replies....nt - Catfish 21:30:50 03/06/02 (0)
  • Re: Q about Euro manifolds..... - Troy Rudolph 21:18:54 03/06/02 (0)
• Connector Plug - Karl 20:19:27 03/06/02 (3)
  • amp part # 827551-3 shell 927846-1 contact - Peter Florance 10:28:09 03/07/02 (0)
  • Re: Connector Plug - Peter Florance 21:25:45 03/06/02 (1)
    • There is a special tool I've used recently, , , - Jefflee 22:29:22 03/06/02 (0)
• Boy, there sure are some negative sour pusses - Mike R 19:10:22 03/06/02 (14)
  • NEGATIVE SOUR PUSS's?!?!? These guys are 100% - Scott 08:26:17 03/07/02 (2)
    • Speak for yourself. I am old and a sourpuss>> - Lars BendOr e12z 17:04:54 03/07/02 (0)
    • Id have to agree with Scott... - Catfish 11:42:29 03/07/02 (0)
  • Re: Boy, there sure are some negative sour pusses - Karl 20:14:14 03/06/02 (10)
    • Karl, check out these pictures.... - Troy Rudolph 21:13:10 03/06/02 (1)
      • That looks familiar... - Karl 16:30:14 03/07/02 (0)
    • Why that would even smoke TCD's car! - guess who 21:08:30 03/06/02 (5)
      • Not Likely......................................nt - Scott 08:54:10 03/07/02 (0)
      • Re: Why that would even smoke TCD's car! - Troy Rudolph (Webmaster) 21:16:27 03/06/02 (3)
        • 'Guess Who' - Please Read - Peter Florance - First Fives Dictator for life 21:37:30 03/06/02 (2)
          • Re: 'Guess Who' - Please Read - Frank H 21:45:32 03/06/02 (1)
            • Frank , , , you gotta stop in Atlanta. We'll pay ! - Jefflee 22:32:08 03/06/02 (0)
    • Now they're picking on you Karl - Mike R 21:06:13 03/06/02 (0)
    • Nobody is jealous yet. - TCD 21:02:09 03/06/02 (0)
• Brake Caliper Rebuild FAQ Link Fixed - Peter Florance 17:21:07 03/06/02 (0)
• Re:3.5 liter oil pan versus original oil pan - richard lizardi 15:26:56 03/06/02 (3)
  • Re:3.5 liter oil pan versus original oil pan - Karl 19:54:38 03/06/02 (1)
    • Re:3.5 liter oil pan versus original oil pan - Peter Florance 21:48:44 03/06/02 (0)
  • Re:3.5 liter oil pan versus original oil pan - mikey 16:01:52 03/06/02 (0)
• Re:ac compressor - richard lizardi 15:19:35 03/06/02 (0)
• Latest Project.... - Kaveman 13:18:02 03/06/02 (4)
  • dumb question, where is that going to mount? - Adam Wilson 15:08:07 03/06/02 (2)
    • Re: dumb question, where is that going to mount? - Kaveman 18:47:46 03/06/02 (0)
    • Re: dumb question, where is that going to mount? - Mr. Coffey 15:47:11 03/06/02 (0)
  • Thats AWSOME!!! how did you do it... - Scott 13:51:15 03/06/02 (0)
• Check out the BEAUTIFUL M-535i at - Jefflee 11:53:23 03/06/02 (6)
  • yep, pretty old news.... - Adam Wilson 15:14:58 03/06/02 (0)
  • I actually went and looked at it..started her up.. - Scott 14:52:56 03/06/02 (0)
  • Re: Check out the BEAUTIFUL M-535i at - Tara Knowles 14:36:54 03/06/02 (0)
  • Re: Check out the BEAUTIFUL M-535i at - T. Han 13:52:06 03/06/02 (2)
    • I say Hart-edge only really fast. nt - Kevin Kew 14:50:56 03/06/02 (1)
      • LMAO!!! good one...DOH!!! nt - Scott 14:54:03 03/06/02 (0)
• Slant 6 guys weld cast and run turbo's no problem - Mike R 10:45:31 03/06/02 (2)
  • Would there be any clearance issues?? - Scott 10:59:19 03/06/02 (1)
    • I'm working that part out now. - Mike R 11:25:30 03/06/02 (0)
• Build a twin turbo cheaply - Mike R 09:58:45 03/06/02 (22)
  • cheaply? how cheap is cheap? - mikey 11:46:07 03/06/02 (14)
    • Not true mikey..we used the compressor - Scott 13:04:37 03/06/02 (0)
    • Seem's to have plenty of low end torque to me - Mike R 12:14:39 03/06/02 (11)
      • Re: Seem's to have plenty of low end torque to me - Frank H 15:25:10 03/06/02 (10)
        • You have nice toys. - Mike R 15:37:40 03/06/02 (0)
        • Frank U have way too many cool cars..go away!!! - Scott 15:33:47 03/06/02 (8)
          • Re: Frank U have way too many cool cars..go away!!! - Frank H 15:58:40 03/06/02 (7)
            • great thread! still not convinced - mikey 16:20:13 03/06/02 (5)
              • Re: great thread! still not convinced - guess who 19:14:49 03/06/02 (2)
                • cheap shot dude - mikey 20:07:13 03/06/02 (1)
                  • Re: cheap shot dude - guess who 21:01:52 03/06/02 (0)
              • is that a dodge? i owned one once. NOT! - mikey 16:58:03 03/06/02 (1)
                • Re: is that a dodge? i owned one once. NOT! - guess who 19:13:19 03/06/02 (0)
            • HAH! well said....nt - Scott 16:10:32 03/06/02 (0)
    • small twin tubo's don't lag, there's less mass - jude 12:10:55 03/06/02 (0)
  • I went this route once.... - Scott 10:06:08 03/06/02 (6)
    • cast can be welded - MIke R 10:15:21 03/06/02 (5)
      • the problem with welding cast manifolds is.... - Peter Florance 16:28:26 03/06/02 (0)
      • Re: cast can be welded - Frank H 12:37:00 03/06/02 (0)
      • I know it can be welded, Inever said it couldn't, - Scott 10:24:46 03/06/02 (2)
        • use nickle rods - 123 10:48:15 03/06/02 (1)
          • how about a blacksmith? - mikey 17:14:17 03/06/02 (0)
• Gasket sealer or no gasket sealer?? - Scott 09:41:58 03/06/02 (6)
  • Durko or Honda Bond - Peter Florance 09:15:19 03/07/02 (0)
  • Re: Gasket sealer or no gasket sealer?? - Kaveman 13:23:55 03/06/02 (0)
  • When I rebuilt, , , , the manual said to , , , - Jefflee 12:17:43 03/06/02 (1)
    • Re: When I rebuilt, , , , the manual said to , , , - Karl 20:11:23 03/06/02 (0)
  • Don't think gasket sealer will help - Erich M_SCAL81/633 11:33:13 03/06/02 (1)
    • I had the head and cover Mic'd..they are exact.(nt - Scott 12:53:18 03/06/02 (0)
• Help me out with the Brake Vacuum problem.. - Scott 09:36:14 03/06/02 (6)
  • Are you talking about the one-way valve to the - Jefflee 12:13:06 03/06/02 (5)
    • Yep..whats the deal???? let me know..Ill get 1 on - Scott 13:06:13 03/06/02 (4)
      • Valves are available and , , , - jefflee 13:29:17 03/06/02 (3)
        • backwards! - Peter Florance 08:39:19 03/07/02 (2)
          • Thanks Peter! Jefflee...your Fired!!..LOL nt - Scott 08:53:15 03/07/02 (1)
            • These things always work out. Thanks Peter (nt) - Jefflee 09:08:37 03/07/02 (0)
• AND....Im in the market for HD's, Boge gas, Koni.. - Catfish 02:26:20 03/06/02 (0)
• Ok, Im selling the Bilstein Sports/ Dinan springs - Catfish 01:41:46 03/06/02 (12)
  • Where are you located? - Collins 13:53:48 03/06/02 (9)
    • NorCal/ Lowered not sagging......nt - Catfish 20:50:04 03/06/02 (8)
      • Re: NorCal/ Lowered not sagging......nt - Collins 12:36:00 03/07/02 (7)
        • Re: NorCal/ Lowered not sagging......nt - Catfish 13:13:56 03/07/02 (6)
          • Re: NorCal/ Lowered not sagging......nt - Collins 13:20:34 03/07/02 (5)
            • If you send me Email ad. I can send you pics of... - Catfish 23:31:05 03/07/02 (0)
            • Re: NorCal/ Lowered not sagging......nt - Catfish 22:36:30 03/07/02 (3)
              • Struts - Collins 12:46:13 03/08/02 (2)
                • Re: Struts - Collins I will need an email addy.....more... 13:36:03 03/08/02 (1)
                  • Re: Struts - Collins 13:58:25 03/08/02 (0)
  • Re: Ok, Im selling the Bilstein Sports/ Dinan springs - Richie Rambo 09:51:56 03/06/02 (1)
    • Re: Ok, Im selling the Bilstein Sports/ Dinan springs - Catfish 11:22:48 03/06/02 (0)
• will 3.4 lt. pistons fit in to a 2.8? - mattew 00:16:08 03/06/02 (11)
  • Re: will 3.4 lt. pistons fit in to a 2.8? - Matt 10:57:16 03/06/02 (0)
  • Nope... - Wietse 08:26:42 03/06/02 (6)
    • What ??? - Mark 11:10:29 03/06/02 (5)
      • Cylinder Wall Thickness - Wietse 15:51:06 03/06/02 (1)
        • Re: Cylinder Wall Thickness - Wietse 18:06:21 03/06/02 (0)
      • Still Nope - Troy Rudolph 12:29:43 03/06/02 (0)
      • I agree with Wietse on this one - Erich M_SCAL81/633 11:44:18 03/06/02 (1)
        • Some more points - Mark 21:14:23 03/06/02 (0)
  • Re: will 3.4 lt. pistons fit in to a 2.8? - Mark 02:34:01 03/06/02 (2)
    • Re: will 3.4 lt. pistons fit in to a 2.8? - mikey 11:54:38 03/06/02 (1)
      • oops, meant to say same HEIGHT! - mikey 11:56:03 03/06/02 (0)
• Radiator sensors - T.Han 00:10:13 03/06/02 (1)
  • No, it doesnt matter, it's an open/close switch.. - Scott 09:31:59 03/06/02 (0)
• M535i lowering springs - Jake Hall 23:30:50 03/05/02 (4)
  • Got any pics of your car ???? (nt) - Jefflee 12:03:36 03/06/02 (1)
    • Re: Got any pics of your car ???? (nt) - Jake Hall 22:24:45 03/06/02 (0)
  • Re: M535i lowering springs - T.Han 23:59:54 03/05/02 (1)
    • Re: M535i lowering springs - Jake Hall 22:22:01 03/06/02 (0)
• 530i vacuum hose diagram posted - Peter Florance 21:56:42 03/05/02 (0)
• brakes ???? - BIGERIK 20:39:33 03/05/02 (10)
  • GO FOR IT, you will love it!!!!! (longish) - Patrick Goss 09:00:18 03/06/02 (3)
    • Rocky Mountain Motorsports has a sale on , , , - Jefflee 12:00:22 03/06/02 (1)
      • http://www.motorworks.com/bmw/ - Patrick Goss 08:43:45 03/07/02 (0)
    • if you use Porterfield..... - Peter Florance 09:07:40 03/06/02 (0)
  • Re: SS lines - Peter Claassen 21:53:29 03/05/02 (3)
    • Re: SS lines - BIGERIK 23:03:31 03/05/02 (2)
      • what pads? - Peter Florance 07:02:41 03/06/02 (1)
        • Re: what pads? - BIGERIK 19:58:18 03/06/02 (0)
  • Re: brakes ???? - Peter Florance 21:37:42 03/05/02 (0)
  • Re: brakes ???? - Troy Rudolph 21:13:50 03/05/02 (0)
• E12 WANTED - SoCal, reasonable - Nick 19:49:42 03/05/02 (0)
• Anyone ever use STI brand igniton wires? - John in NH 19:34:57 03/05/02 (0)
• e12 parts exchange list in error? - Mike R 13:13:38 03/05/02 (2)
  • Re: e12 parts exchange list in error? - Peter Florance 14:09:07 03/05/02 (1)
    • Re: e12 parts exchange list in error? - mikey 15:33:15 03/05/02 (0)
• cheap Koni's - greghill 11:19:48 03/05/02 (1)
  • Koni rear shock NLA '80 e-12 - David B 23:44:55 03/05/02 (0)
• DANGER !! Glove-Box Crash Button - Jefflee 10:48:27 03/05/02 (4)
  • Re: DANGER !! Glove-Box Crash Button - T.Han 11:57:10 03/05/02 (3)
    • By removing things and looking and , , , - Jefflee 12:06:54 03/05/02 (2)
      • Re: By removing things and looking and , , , - T. Han 15:25:36 03/05/02 (1)
        • Got a kink in my neck from the Heater Control , , - Jefflee 16:05:34 03/05/02 (0)
• Any1 have pics of their armrests? - John in NH 09:03:14 03/05/02 (5)
  • Re: Maybe I'm the only one who has an armrest - John in NH 17:28:50 03/05/02 (4)
    • Re: Maybe I'm the only one who has an armrest - billy 18:23:30 03/05/02 (3)
      • The Bondi-Police are gonna get that BLACK stuff !! - jefflee 19:47:50 03/05/02 (0)
      • Re: Mail me a pic when you get a chance - John in NH 19:13:56 03/05/02 (1)
        • Re: Mail me a pic when you get a chance - billy 12:19:46 03/06/02 (0)
• Any Euros with O2 sensors?.. - Catfish 02:34:09 03/05/02 (9)
  • Re: Any Euros with O2 sensors?.. - Peter Florance 03:02:55 03/05/02 (5)
    • Do you think they would bother to retrofit..... - Catfish 03:08:01 03/05/02 (4)
      • Re: Do you think they would bother to retrofit..... - Peter Florance 07:10:42 03/05/02 (3)
        • Re: Do you think they would bother to retrofit..... - Catfish 13:08:58 03/05/02 (1)
          • Re: Do you think they would bother to retrofit..... - Peter Florance 16:26:32 03/05/02 (0)
        • Re: Do you think they would bother to retrofit..... - T.Han 09:31:36 03/05/02 (0)
  • Re: Any Euros with O2 sensors?.. - Mark 02:42:49 03/05/02 (2)
    • Re: Any Euros with O2 sensors?.. - Catfish 03:05:49 03/05/02 (1)
      • Re: Any Euros with O2 sensors?.. - Mark 05:58:57 03/05/02 (0)
• Fuel capacity - Rambo 22:51:45 03/04/02 (4)
  • Had to have the tank replaced... - Kevin Kew 14:46:52 03/05/02 (0)
  • 81..put 14 gal in today... light was not on yet. - Lars BendOr E12 00:55:03 03/05/02 (0)
  • Re: Fuel capacity - Frank H 00:26:25 03/05/02 (1)
    • What about the '78 530i????? - Martyn Smith 08:55:43 03/05/02 (0)
• selling a nice e12 - mikey 21:59:34 03/04/02 (0)
• Limited Slip Differentials , , A question???? - Jefflee 21:18:16 03/04/02 (5)
  • Re: Limited Slip Differentials , , A question???? - Frank H 00:13:34 03/05/02 (3)
    • We now have some sort of ratio , , , - Jefflee 10:35:18 03/05/02 (2)
      • Arent those Back wards??? - Scott 11:44:41 03/05/02 (1)
        • ????? But the middle one is RIGHT !! - Jefflee 12:10:03 03/05/02 (0)
  • Re: Limited Slip Differentials , , A question???? - Troy Rudolph 23:23:05 03/04/02 (0)
• sway bar size? - David PNW 2002 20:30:58 03/04/02 (1)
  • Re: sway bar size? - Jefflee 20:52:22 03/04/02 (0)
• Secret Camshafts - Frank H 20:03:07 03/04/02 (6)
  • Re: Secret Camshafts - Jim 22:19:31 03/04/02 (0)
  • Re: Secret Camshafts - Bill Barrett 21:14:34 03/04/02 (4)
    • Re: Secret Camshafts - Mark 21:29:48 03/05/02 (0)
    • DOH!!!!! - Scott 11:42:03 03/05/02 (0)
    • Re: Secret Camshafts - Frank H 10:17:05 03/05/02 (1)
      • Re: Secret Camshafts - Jim 19:24:40 03/05/02 (0)
• Lowering springs? - Bob 18:44:52 03/04/02 (5)
  • Re: Lowering springs? - Karl 22:44:44 03/05/02 (0)
  • Re: Lowering springs? - Blair 21:29:42 03/04/02 (3)
    • Re: Lowering springs? - Peter Florance 03:05:19 03/05/02 (2)
      • Re: Lowering springs? - Bob 12:49:35 03/05/02 (1)
        • Re: Lowering springs? - Peter Florance 21:51:33 03/05/02 (0)
• O2 Sensor Idle Lag - Kaveman 17:54:03 03/04/02 (1)
  • Re: O2 Sensor Idle Lag - Kaveman 14:17:54 03/05/02 (0)
• Is Adam W. differential bushing alright? - Dean 17:33:45 03/04/02 (1)
  • Also,,,is that a , , , , - Jefflee 20:46:07 03/04/02 (0)
• What Are the Large Tool Kits Worth ? - Jefflee 16:01:55 03/04/02 (5)
  • Re: What Are the Large Tool Kits Worth ? - Bob Iverach 13:57:16 03/05/02 (0)
  • Samstag Sales sells the kits... Heyco OEM - Larsco BendOr e12z 00:50:53 03/05/02 (0)
  • I Know! But my QUESTION???? (nt) - Jefflee 20:42:04 03/04/02 (0)
  • THATS MY HIGH BID CURRENTLY ON EBAY - BIGERIK 20:39:25 03/04/02 (0)
  • $82 currently on ebay - ...tom 16:36:15 03/04/02 (0)
• Anyone check injectors with , , , - Jefflee 15:53:48 03/04/02 (3)
  • Re: Anyone check injectors with , , , - Kaveman 17:58:00 03/04/02 (2)
    • 9 Volts may a bit close to 12, , , so - Jefflee 20:40:21 03/04/02 (1)
      • 2 to2.5 volts - mike r 13:46:44 03/05/02 (0)
• Sacramento Area 5er Dismantling - Free Parts - Jason Griffith 14:04:08 03/04/02 (3)
  • Re: Sacramento Area 5er Dismantling - Free Parts - Jim D 20:02:17 03/05/02 (0)
  • Re: Sacramento Area 5er Dismantling - Free Parts - Richie Rambo 23:06:29 03/04/02 (0)
  • Seats???? - Chad Z 14:18:52 03/04/02 (0)
• Broken bolt on Thermostat Housing. - Dean 11:43:22 03/04/02 (10)
  • Re: Broken bolt on Thermostat Housing. - Troy Rudolph 13:31:55 03/04/02 (1)
    • but.... - Peter Florance 13:51:36 03/04/02 (0)
  • Re: Broken bolt on Thermostat Housing. - T. Han 12:05:21 03/04/02 (7)
    • Re: Broken bolt on Thermostat Housing. - mikey 12:34:47 03/04/02 (6)
      • I got vice grips on it, and broke it more! - Dean Noel 12:57:27 03/04/02 (5)
        • Re: I got vice grips on it, and broke it more! - Peter Florance 13:50:48 03/04/02 (4)
          • This still won't solve the overheating problem - Dean 15:55:18 03/04/02 (3)
            • Re: This still won't solve the overheating problem - T.Han 19:22:12 03/04/02 (2)
              • Re: Chunk the housing - Mr. BILL 21:31:51 03/04/02 (1)
                • Re: Chunk the housing - Peter Florance 12:21:56 03/05/02 (0)
• spotted @ CopperMtn - greghill 11:33:41 03/04/02 (0)
• Attn: NE E12er's - Genesee Valley Races - Peter Florance 11:05:34 03/04/02 (1)
  • Should be a great time..I'm in the Genesee.. - Timmer 16:30:24 03/04/02 (0)
• Gas Door Won't Unlock...!! - Need Gas! 10:17:07 03/04/02 (3)
  • Thank you ! I'm good to go..... - Need Gas! 12:09:29 03/04/02 (0)
  • Re: Gas Door Won't Unlock...!! - Mr. Coffey 11:05:49 03/04/02 (0)
  • Re: Gas Door Won't Unlock...!! - Jim Davis 11:02:57 03/04/02 (0)
• rubber spring gasket(?) always missing? - ...tom 05:15:32 03/04/02 (1)
  • Re: rubber spring gasket(?) always missing? - T.Han 09:18:42 03/04/02 (0)
• My gas pedal broke loose! - Luke 22:50:47 03/03/02 (8)
  • Re: My gas pedal broke loose! - Peter Florance 06:48:14 03/04/02 (7)
    • Re: My gas pedal broke loose! - Luke 09:57:55 03/04/02 (2)
      • wait a minute... - Peter Florance 10:58:30 03/04/02 (1)
        • Re: wait a minute... - Luke 11:17:18 03/04/02 (0)
    • Re: My gas pedal broke loose! - T. Han 09:23:00 03/04/02 (3)
      • Re: My gas pedal broke loose! - Peter Florance 19:25:15 03/04/02 (2)
        • Re: My gas pedal broke loose! - T.Han 19:28:09 03/04/02 (1)
          • Re: My gas pedal broke loose! - Peter Florance 19:47:55 03/04/02 (0)
• Car of the Month - March - Troy Rudolph (Webmaster) 18:59:16 03/03/02 (3)
  • Cruisin' in Oklahoma. Go get'em Dave. (nt) - Jefflee 15:41:58 03/04/02 (0)
  • That looks like a sweet ride - Martyn Smith 14:04:32 03/04/02 (0)
  • Re: Car of the Month - March - Mr. Coffey 00:04:10 03/04/02 (0)
• Poll for those with diff mount failure - Year? - Peter Florance 18:11:51 03/03/02 (23)
  • Re: the diff mount problem... Has anyone ever - Lars BendOr e12z 17:16:36 03/04/02 (0)
  • yes, 1980, repaired w/bolts thru trunk - billy isbell 13:35:13 03/04/02 (0)
  • Re: Poll for those with diff mount failure - Year? - fred 13:24:57 03/04/02 (1)
    • What year? What car? Weight? - Jefflee 15:43:33 03/04/02 (0)
  • 1981, still perfect - Adam Wilson 10:33:32 03/04/02 (1)
    • Adam, the mount looks busted? - Dean 17:19:26 03/04/02 (0)
  • 79... No Failure... - Kaveman 09:59:31 03/04/02 (0)
  • Re: Poll for those with diff mount failure - Year? - Lenny D. 00:55:59 03/04/02 (0)
  • Re: Poll for those with diff mount failure - Year? - Jefflee 23:39:05 03/03/02 (0)
  • '80 528i - converted to 5 speed - Failed - Dean 23:07:55 03/03/02 (0)
  • Re: Poll for those with diff mount failure - Year? - Don Daynes 22:36:26 03/03/02 (0)
  • Re: Poll for those with diff mount failure - Year? - T.Han 21:42:53 03/03/02 (0)
  • Both of mine-80's - Mark Phllips 20:28:05 03/03/02 (0)
  • Re: Poll for those with diff mount failure - Year? - Ryan Bryan 20:10:23 03/03/02 (0)
  • Re: Poll for those with diff mount failure - Year? - Karl 19:27:55 03/03/02 (0)
  • Re: Poll for those with diff mount failure - Year? - Troy Rudolph 19:09:13 03/03/02 (7)
    • Re: Poll for those with diff mount failure - Year? - Don Daynes 22:31:23 03/03/02 (1)
      • Re: Poll for those with diff mount failure - Year? - Frank H 09:28:27 03/04/02 (0)
    • Did yours ever fail? - Peter Florance 20:41:17 03/03/02 (4)
      • Re: Did yours ever fail? - Troy Rudolph 22:43:39 03/03/02 (0)
      • Re: Did yours ever fail? - Steve 21:36:44 03/03/02 (0)
      • Re: Did yours ever fail? - Mark 20:55:56 03/03/02 (1)
        • 1976 528 , no problem - Mark 08:24:21 03/04/02 (0)
• Any Bellhousing wanted - Catfish 11:42:14 03/03/02 (8)
  • Re: Any Bellhousing wanted - Sam Schultz 12:23:56 03/03/02 (0)
  • Re: Any Bellhousing wanted - BIGERIK 11:52:47 03/03/02 (6)
    • Located in N. Cal. shipping should be cheap as... - Catfish 13:59:30 03/03/02 (5)
      • Re: Located in N. Cal. shipping should be cheap as... - BIGERIK 22:44:08 03/03/02 (4)
        • Re: Located in N. Cal. shipping should be cheap as... - Catfish 00:27:17 03/04/02 (3)
          • i have one in oregon - mikey 12:37:13 03/04/02 (2)
            • Mikey, what's your ask?? nt - Catfish 16:16:04 03/04/02 (1)
              • 30 clams plus shipping - mikey 22:08:47 03/04/02 (0)
• Glove box crash button - T.Han 00:11:24 03/03/02 (4)
  • Re: Glove box crash button - Karl 07:59:52 03/03/02 (1)
    • Re: Glove box crash button - Peter Florance 11:17:30 03/03/02 (0)
  • Re: Glove box crash button - Mark 05:59:52 03/03/02 (1)
    • Re: Glove box crash button - David B 14:16:28 03/03/02 (0)
• newly aquried - Matthew 23:26:31 03/02/02 (3)
  • Re: newly aquried - Matthew 00:55:02 03/03/02 (0)
  • Re: newly aquried - Troy Rudolph 23:58:38 03/02/02 (0)
  • Re: newly aquried - blair 23:38:37 03/02/02 (0)
• Board "Improvements" - Troy Rudolph (Webmaster) 22:50:33 03/02/02 (0)
• Bils. Sports/Dinan to trade for HD's/ springs..... - Catfish 22:48:50 03/02/02 (3)
  • Re: Bils. Sports/Dinan to trade for HD's/ springs..... - Saeef 04:07:34 03/04/02 (1)
    • Re: Bils. Sports/Dinan to trade for HD's/ springs..... - Catfish 16:18:18 03/04/02 (0)
  • Re: Bils. Sports/Dinan to trade for HD's/ springs..... - Adam Wilson 10:38:42 03/03/02 (0)
• More lockmotor questions - Mr. Coffey 20:41:50 03/02/02 (9)
  • Re: More lockmotor questions - RichArt 23:55:35 03/02/02 (4)
    • Re: More lockmotor questions - Mr. Coffey 00:01:20 03/03/02 (3)
      • Re: More lockmotor questions - RichArt 00:34:27 03/03/02 (2)
        • Update - Mr. Coffey 01:11:11 03/03/02 (1)
          • Re: Update - Karl 08:22:51 03/03/02 (0)
  • Re: More lockmotor questions - Peter Florance 23:19:12 03/02/02 (1)
    • Re: More lockmotor questions - Mr. Coffey 23:56:36 03/02/02 (0)
  • Re: More lockmotor questions - T.Han 21:43:55 03/02/02 (1)
    • Re: More lockmotor questions - David B 14:44:30 03/03/02 (0)
• picknpull - BIGERIK 19:29:36 03/02/02 (0)
• thermal reactor question - mark 17:04:34 03/02/02 (3)
  • Re: thermal reactor question - Mark 19:34:15 03/03/02 (0)
  • Re: thermal reactor question - blair 23:42:55 03/02/02 (1)
    • Re: thermal reactor question - karl sisson 17:21:54 03/04/02 (0)
• Fuel injector question please , , , - Jeflee 12:29:23 03/02/02 (1)
  • Re: Fuel injector question please , , , - Jim Ockner 17:05:46 03/02/02 (0)
• Octane change part 2 ..what do you guys use? - John in NH 22:29:11 03/01/02 (15)
  • Octane Boosters - Karl 19:48:45 03/03/02 (0)
  • She's my baby and I run 93 and will run 93... - Steve C. 17:09:31 03/02/02 (1)
    • Re: She's my baby and I run 93 and will run 93... - T. Han 20:43:16 03/02/02 (0)
  • 87 myself... - Kevin Kew 12:01:06 03/02/02 (0)
  • I use 89 octane - Robert Bondi 11:48:33 03/02/02 (0)
  • John, when mine was stock I ran 89 Oct... - Scott 11:41:25 03/02/02 (0)
  • Re: Octane change part 2 ..what do you guys use? - Karl 09:42:23 03/02/02 (0)
  • Re: Octane change part 2 ..what do you guys use? - Peter Florance 09:16:47 03/02/02 (0)
  • Re: Octane change part 2 ..what do you guys use? - Kaveman 22:48:16 03/01/02 (4)
    • Re: less than a gal. left before filling w/ 94 - John in NH 07:56:52 03/02/02 (0)
    • Re: Octane change part 2 ..what do you guys use? - Rambo 23:06:23 03/01/02 (2)
      • Re: Octane change part 2 ..what do you guys use? - T. Han 00:12:19 03/02/02 (1)
        • Re: did the search/not 2 many posts on this topic - John in NH 07:59:57 03/02/02 (0)
  • Re: Octane change part 2 ..what do you guys use? - Rambo 22:36:19 03/01/02 (1)
    • Re: In a state w/no speed limit...Livingston? - John in NH 08:05:32 03/02/02 (0)
• Test - Troy Rudolph 20:36:21 03/01/02 (0)
• OT: But have a look - Kaveman 20:10:29 03/01/02 (0)
• FS: 2002 Shift Lever... - Kaveman 20:00:15 03/01/02 (3)
  • Sold... Thanks... (eom) - Kaveman 15:14:41 03/02/02 (0)
  • Do you have a warehouse of parts or what????? - Dave Spencer 22:32:39 03/01/02 (1)
    • Accumulated Quite a Collection!.... - Kaveman 22:44:08 03/01/02 (0)
• 5 speed conversions - Elio 16:01:29 03/01/02 (2)
  • Check the FAQ Article - Troy Rudolph 18:08:45 03/01/02 (1)
    • Re: Check the FAQ Article - Elio 21:52:00 03/08/02 (0)
• If I do a 3.5 Motronic conversion, could I still.. - cfisher 15:17:49 03/01/02 (7)
  • Re: If I do a 3.5 Motronic conversion, could I still.. - Troy Rudolph 18:18:09 03/01/02 (0)
  • Re: If I do a 3.5 Motronic conversion, could I still.. - Peter Claassen 18:13:50 03/01/02 (0)
  • Re: If I do a 3.5 Motronic conversion, could I still.. - mikey 15:43:32 03/01/02 (4)
    • Could you tell me what year would be the best 3.5 - / 5-speed to use? cfisher 18:03:43 03/01/02 (0)
    • but if you do use a 4 speed - Peter Florance 16:15:59 03/01/02 (2)
      • Let me explain myself a little better, I want to.. - cfisher 17:59:20 03/01/02 (1)
        • Re: Let me explain myself a little better, I want to.. - Peter Florance 18:45:26 03/01/02 (0)
• Paging Peter Claasen re: Tranny install..... - Catfish 01:46:09 03/01/02 (5)
  • Try wire - might work - Peter Claassen 11:52:57 03/01/02 (1)
    • Re: Try wire - might work - Catfish 00:00:42 03/02/02 (0)
  • Re: Paging Peter Claasen re: Tranny install..... - Kaveman 09:25:23 03/01/02 (0)
  • Are you putting in the stock Gearbox? or 5spd? - Scott 09:18:22 03/01/02 (1)
    • Thanks, tranny is 5 speed. It looks like.... - Catfish 11:30:18 03/01/02 (0)
• News Flash: (Atlanta Specific) - Dave Spencer 23:23:03 02/28/02 (14)
  • Re: News Flash: (Atlanta Specific) - Funfer 16:38:14 03/01/02 (1)
    • Sure... - Dave Spencer 22:28:07 03/01/02 (0)
  • spring break = E12 work for me in Dallas - Robert Bondi 01:04:51 03/01/02 (11)
    • Anode - Karl 09:58:15 03/02/02 (2)
      • engineer? - Robert Bondi 11:34:26 03/02/02 (1)
        • Maybe that's what happened to my bumper (nt) - Jefflee 11:47:42 03/02/02 (0)
    • Re: spring break = E12 work for me in Dallas - Jim Davis 09:39:37 03/01/02 (1)
      • only task I'm not doing personally - Robert Bondi 12:31:27 03/01/02 (0)
    • Robert...Stay away from Sacrificing...It Illegal.. - Scott 08:35:26 03/01/02 (4)
      • wow, that's quite an invitation - Robert Bondi 12:11:46 03/01/02 (3)
        • At first its rust, but then next thing you know - Scott 13:11:50 03/01/02 (2)
          • Give in to the dark side... - Chuck Denson 14:16:03 03/01/02 (1)
            • LOL!!!(nt) - Scott 14:44:18 03/01/02 (0)
    • I (for one) would like to hear more... - Dave Spencer 07:00:34 03/01/02 (0)
• Cheapest source for front fenders? - John in NH 21:31:06 02/28/02 (16)
  • Re: Cheapest source for front fenders? - Eddie 12:10:17 03/04/02 (1)
    • Re: Cheapest source for front fenders? - Eddie 12:13:33 03/04/02 (0)
  • try Maximillian's - ...tom 05:49:25 03/01/02 (1)
    • what color? condition? how much? where are you? - John in NH 07:22:33 03/01/02 (0)
  • A source for front fenders - Robert Bondi 22:07:12 02/28/02 (11)
    • Re: A source for front fenders - T.Han 22:46:57 02/28/02 (1)
      • Re: A source for front fenders - Troy Rudolph 09:08:17 03/01/02 (0)
    • Re: Rocky Mtns. are 199 not 299 (nt) - John in NH 22:34:55 02/28/02 (5)
      • Sorry, John, you're right on price (nt) - Robert Bondi 00:47:47 03/01/02 (0)
      • Re: Rocky Mtns. also filed for chapter 11 - Jeremy 23:48:26 02/28/02 (3)
        • Re: Rocky Mtns. also filed for chapter 11 - Derek 16:13:26 03/04/02 (0)
        • Re: I think I'll pass on doing bidness w/ them - John in NH nowhere near the rocky mtns 08:11:55 03/01/02 (1)
          • End of message (eom) - Dave Spencer 10:24:12 03/01/02 (0)
    • Re: Bavarian Autosport in NH has em for 199 (nt) - John in NH 22:29:41 02/28/02 (2)
      • I got mine for $90 - Steve C. 06:48:52 03/01/02 (1)
        • Re: I got mine for $90 - jethro 10:01:25 03/01/02 (0)
• Radiator report - T.Han 20:19:34 02/28/02 (14)
  • BMP has one in the bargain bin... - Dave Spencer 10:45:55 03/01/02 (0)
  • $125 recore from the yellow pgs. Funny. - Trubey 23:55:19 02/28/02 (0)
  • Somebody blowing smoke up you!! - Lars BendOr e12z 20:42:29 02/28/02 (9)
    • Sorry T. Not directed at you>>>>> - Lars 20:48:13 02/28/02 (8)
      • Re: Sorry T. Not directed at you>>>>> - T.Han 22:32:21 02/28/02 (7)
        • Just paid $125 to have mine done... - Dave Spencer 22:36:55 02/28/02 (0)
        • Trust the certification -- Behr certified means - Lars BendOr e12z 22:36:36 02/28/02 (5)
          • Danger!!!! - Dave Spencer 22:39:11 02/28/02 (4)
            • Don't worry... - Robert Bondi 01:10:54 03/01/02 (1)
              • So now the world revolves around... - Dave Spencer... 07:03:23 03/01/02 (0)
            • Re: Danger!!!! - T.Han 22:55:58 02/28/02 (1)
              • Re: Danger!!!! - David B 00:28:38 03/02/02 (0)
  • Re: Radiator report - Kaveman 20:26:54 02/28/02 (1)
    • Re: Radiator report - T.Han 22:58:17 02/28/02 (0)
• Peter F - Question re: lock motors - Mr. Coffey 20:19:12 02/28/02 (9)
  • Re: Peter F - Question re: lock motors - Kaveman 20:30:37 02/28/02 (8)
    • Did the same... - Dave Spencer 22:48:23 02/28/02 (0)
    • Re: Peter F - Question re: lock motors - Mr. Coffey 21:08:49 02/28/02 (6)
      • Re: Peter F - Question re: lock motors - Peter Florance 21:15:20 02/28/02 (5)
        • Re: Peter F - Question re: lock motors - T.Han 23:23:55 02/28/02 (4)
          • the 4sec "click" - David B 01:22:24 03/02/02 (3)
            • Re: the 4sec "click" - Peter Florance 14:47:44 03/02/02 (2)
              • LOCK MOTOR ? Re: the 4sec "click" - RichArt 18:30:07 03/02/02 (1)
                • Re: LOCK MOTOR ? Re: the 4sec "click" - Peter Florance 20:38:01 03/03/02 (0)
• T. Han: Update on Heater Control Valve replacemen - Jefflee 20:13:59 02/28/02 (13)
  • Re: T. Han: Update on Heater Control Valve replacemen - Lenny D. 01:12:26 03/04/02 (0)
  • Wanna hear a joke about a heater control valve? - Trubey 00:03:54 03/01/02 (3)
    • That's NO joke. Try something , , , - Jefflee 12:17:25 03/02/02 (0)
    • An Alternative....? - Kaveman 09:08:55 03/01/02 (0)
    • I have done this in the past as well... - Dave Spencer 07:07:16 03/01/02 (0)
  • Does this mean... - Dave Spencer 23:15:58 02/28/02 (0)
  • Re: T. Han: Update on Heater Control Valve replacemen - Kaveman 20:24:11 02/28/02 (6)
    • Must use cheap alloy wrenches to bend , , , - Jefflee 11:55:15 03/02/02 (0)
    • The 90 is yours, the tape is mine! Thanks Sean - Jefflee 21:05:23 02/28/02 (4)
      • Don D is the 90 inventor..... - Kaveman 10:03:32 03/01/02 (2)
        • Thanks to Don. (nt) - Jefflee 11:57:22 03/02/02 (0)
        • YES ! I'm angling (?) in ! (nt) - Jefflee 11:52:46 03/02/02 (0)
      • Re: The 90 is yours, the tape is mine! Thanks Sean - T. Han 23:06:53 02/28/02 (0)
• Auxillary Fan - John R. Bodden 19:45:15 02/28/02 (2)
  • Re: Auxillary Fan - Kaveman 20:34:45 02/28/02 (1)
    • Thanks Sean - John R. Bodden 21:15:49 02/28/02 (0)
• Sounds like a Newtonian problem ... - Peter Claassen 19:01:59 02/28/02 (1)
  • Re: Sounds like a Newtonian problem ... - Kaveman 20:35:40 02/28/02 (0)
• slightly OT - Kevin Kew 15:50:25 02/28/02 (2)
  • I spent 30 min at that site.WOW!!!! nt - Scott 19:45:18 02/28/02 (0)
  • That is so COOL! - Tara Knowles 17:02:29 02/28/02 (0)
• Octane switch and some heavy passengers - John in NH 14:40:24 02/28/02 (6)
  • Re: End result... - John in NH 21:26:44 02/28/02 (0)
  • Am I missing something... - Dave Spencer 16:44:15 02/28/02 (0)
  • Re: Octane switch and some heavy passengers - Peter Florance 15:10:12 02/28/02 (3)
    • Re: Octane switch and some heavy passengers - John in NH 17:52:27 02/28/02 (2)
      • Re: Octane switch and some heavy passengers - T.Han 19:59:52 02/28/02 (1)
        • Re: They know they're fat ..no splainin' 2 be done - John in NH 22:41:11 02/28/02 (0)
• Also, Has anyone got a 265 in N. Cal area?? nt - Catfish 13:20:51 02/28/02 (4)
  • We are selling one, but deal may fall thru - Peter Claassen 16:50:51 02/28/02 (0)
  • Re: Also, Has anyone got a 265 in N. Cal area?? nt - Mr. Coffey 14:04:02 02/28/02 (2)
    • Thanks mr Coffee, Did you catch Mileage on car? nt - Catfish 14:53:00 02/28/02 (1)
      • Re: Thanks mr Coffee, Did you catch Mileage on car? nt - Mr Coffey 17:59:00 02/28/02 (0)
• Do any Getrag 260's have speedo drive?? nt - catfish 13:14:59 02/28/02 (2)
  • Re: Do any Getrag 260's have speedo drive?? - Troy Rudolph 13:36:00 02/28/02 (1)
    • Good to know, Thanks....nt - catfish 14:53:53 02/28/02 (0)
• My Hybrid South African E12/28 - Remy Davison 10:08:18 02/28/02 (4)
  • Re: My Hybrid South African E12/28 - Jaycee 17:46:35 02/28/02 (1)
    • Re: My Hybrid South African E12/28 - Remy Davison 08:07:07 03/03/02 (0)
  • Re: My Hybrid South African E12/28 - Adam Wilson 10:44:43 02/28/02 (1)
    • Re: My Hybrid South African E12/28 - Remy Davison 08:03:43 03/03/02 (0)
• The moral of the story is... - Bill Barrett 08:51:11 02/28/02 (0)
• Best $60 spent so far, (took 4 yrs to figure out) - Peter Claassen 00:48:06 02/28/02 (1)
  • Re: Best $60 spent so far, (took 4 yrs to figure out) - T. Han 08:26:30 02/28/02 (0)
• Stewart---The Euro was $1800 (I can tell you now.. - catfish 00:17:33 02/28/02 (3)
  • Re: Stewart---The Euro was $1800 (I can tell you now.. - stewart 00:41:26 02/28/02 (2)
    • Don't be stingy... Share! - Trubey 00:09:24 03/01/02 (1)
      • Re: Don't be stingy... Share! - Catfish 01:42:16 03/01/02 (0)
• re: carbon build-up in the intake runners - Ellis 00:13:21 02/28/02 (1)
  • Re: re: carbon build-up in the intake runners - T.Han 10:00:24 02/28/02 (0)
• 528i for $200 - SF bay area - Philippe 21:59:06 02/27/02 (0)
• lurking on E28 bimmer board again and found this.. - Gregory 18:58:17 02/27/02 (1)
  • Not the same but I have one available. Sort of.. - TCD 19:05:19 02/27/02 (0)
• combo relay confessions - Peter Florance 18:52:34 02/27/02 (11)
  • understandable - Adam Wilson 09:43:26 02/28/02 (0)
  • Re: combo relay confessions - Mark80528i 07:23:22 02/28/02 (0)
  • Re: combo relay confessions - Kaveman 20:05:41 02/27/02 (8)
    • Re: combo relay confessions - Mishast 15:14:39 02/28/02 (0)
    • Re: combo relay confessions - Mishast 15:14:32 02/28/02 (0)
    • Re: combo relay confessions - Peter Florance 20:51:07 02/27/02 (5)
      • Re: combo relay confessions - Kaveman 21:35:35 02/27/02 (3)
        • Re: combo relay confessions - Kaveman 10:28:02 02/28/02 (2)
          • Re: combo relay confessions - Peter Florance 21:19:19 02/28/02 (1)
            • Re: combo relay confessions - Kaveman 09:18:13 03/01/02 (0)
      • FAQ updated with my sins and.... - Peter Florance 21:20:16 02/27/02 (0)
• 1979 528i f/s in Ohio..a little info.. - Timmer 18:47:18 02/27/02 (7)