Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XVIII

(2002/03/10 - 2002/04/09)

---

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• New Home Page Graphic - Troy Rudolph (Webmaster) 18:16:47 04/09/02 (0)
• ? about rear bumper on 79 Euro 635CSI - Matt 16:34:40 04/09/02 (0)
• Paging ROBERT DIETSCH - Derek 12:52:51 04/09/02 (0)
• Hey Canadian Bimmer - Jeff Ross 12:41:49 04/09/02 (0)
• FS: 3.45 open diff. I think she'll fit an e12 - Brad Couvillon in La @ fatdaddybmw.com 12:04:27 04/09/02 (2)
  • Re: FS: 3.45 open diff. I think she'll fit an e12 - Karl 16:27:20 04/09/02 (0)
  • The SPAM continues: pics of the diff - Brad Couvillon in La @ fatdaddybmw.com 16:22:58 04/09/02 (0)
• Gearbox Oil - Lee Wareham 11:52:11 04/09/02 (1)
  • Re: Gearbox Oil - Karl 16:30:05 04/09/02 (0)
• factory service manual on ebay - Adam Wilson 11:35:51 04/09/02 (0)
• Does anyone have an Owners Manual for 76?… - Randy McCafferty 10:35:05 04/09/02 (0)
• Rear Bilstein Question/also Bilsteins FS cheap!! - Randy McCafferty 10:19:16 04/09/02 (3)
  • Re: Rear Bilstein Question/also Bilsteins FS cheap!! - Mishast 16:38:40 04/09/02 (0)
  • Will they fit 6/81? - Chuck Denson 10:47:26 04/09/02 (1)
    • Re: Will they fit 6/81? - Randy McCafferty 15:14:28 04/09/02 (0)
• Paging DScott/your email not working - Randy McCafferty 10:11:18 04/09/02 (0)
• Bavaria Headers vs. 530i MANIFOLD - Derek 09:04:32 04/09/02 (3)
  • Re: Bavaria Headers vs. 530i MANIFOLD - Karl 16:34:19 04/09/02 (0)
  • Re: Bavaria Headers vs. 530i MANIFOLD - Randy McCafferty 15:20:58 04/09/02 (1)
    • Re: Bavaria Headers vs. 530i MANIFOLD - Derek 16:48:56 04/09/02 (0)
• Bosch Platinum Plugs - karl sisson 06:30:09 04/09/02 (14)
  • Re: Bosch Platinum Plugs - Robert Bondi 18:12:59 04/09/02 (0)
  • Bosch Platinum Plugs RECAP - Mishast 14:18:59 04/09/02 (0)
  • Re: Bosch Platinum Plugs - Dave Spencer 08:24:34 04/09/02 (0)
  • Re: Bosch Platinum Plugs - Sam Schultz 08:02:14 04/09/02 (1)
    • Re: Bosch Platinum Plugs - Troy Rudolph 13:49:02 04/09/02 (0)
  • Re: Bosch Platinum Plugs - Peter Florance 07:00:22 04/09/02 (7)
    • Re: Bosch Platinum Plugs - Bob Iverach 13:23:25 04/09/02 (1)
      • Re: Bosch Platinum Plugs - Peter Florance 15:40:52 04/09/02 (0)
    • Re: Bosch Platinum Plugs - Lance Lattrulo 08:33:43 04/09/02 (4)
      • Re: Bosch Platinum Plugs - Derek 09:26:42 04/09/02 (0)
      • thank you.. - Peter Florance 08:50:04 04/09/02 (2)
        • I put the Bosch Platinums in my car 10k miles ago - Martyn Smith 09:12:07 04/09/02 (1)
          • Re: I put the Bosch Platinums in my car 10k miles ago - Derek 09:59:04 04/09/02 (0)
  • I use them - Steve C. 06:57:44 04/09/02 (0)
• Paging Scott in Winnipeg - Canada Karl 05:55:59 04/09/02 (0)
• Reposting AFM spring adjustment - Ellis 04:11:24 04/09/02 (1)
  • Re: Reposting AFM spring adjustment - Karl 08:45:32 04/09/02 (0)
• Flywheel resurfacing specs? - Tim 00:39:48 04/09/02 (1)
  • Re: Flywheel resurfacing specs? - Lou 16:10:28 04/09/02 (0)
• Building a cam installation jig, you input wanted - Bill Barrett 23:51:43 04/08/02 (0)
• Paging DR SCOTT - Randy McCafferty 22:42:02 04/08/02 (2)
  • Re: Paging DR SCOTT - DM 16:53:18 04/09/02 (0)
  • Re: Paging DR SCOTT - Bob Iverach 13:31:55 04/09/02 (0)
• 'Radical' Frozen Coolant Bleed Screw Fix - Peter Florance 21:55:10 04/08/02 (6)
  • Re: 'Radical' Frozen Coolant Bleed Screw Fix - Karl 09:04:31 04/09/02 (0)
  • Re: 'Radical' Frozen Coolant Bleed Screw Fix - Mark Phillips 01:15:14 04/09/02 (4)
    • Coolant Bleed Screw Part Number - Peter Florance 06:56:27 04/09/02 (3)
      • Please... - Dave Spencer 07:28:11 04/09/02 (2)
        • I added some text to cooling FAQ - Peter Florance 07:47:42 04/09/02 (1)
          • Hey Peter... - Jeff C 07:58:50 04/09/02 (0)
• '81 528i 5 spd w/ euro bmpr and blk lea int - adam 21:49:33 04/08/02 (1)
  • Re: '81 528i 5 spd w/ euro bmpr and blk lea int - Matt Evans 02:59:27 04/09/02 (0)
• BMP silicone bronze shift bushings - mikey 21:23:02 04/08/02 (3)
  • hey mikey! - Peter Florance 10:41:04 04/09/02 (0)
  • Re: BMP silicone bronze shift bushings - Tim 00:23:11 04/09/02 (1)
    • Re: BMP silicone bronze shift bushings - mikey 00:30:52 04/09/02 (0)
• Got Wet...No Start - Audiotek 21:13:00 04/08/02 (6)
  • Re: Got Wet...No Start - peter claasen 21:59:15 04/08/02 (0)
  • Re: Got Wet...No Start - Peter Florance 21:47:48 04/08/02 (4)
    • Question for Peter - Mark 23:54:38 04/08/02 (3)
      • or use silicone spray - Peter Florance 07:05:14 04/09/02 (0)
      • let it dry first... - Chuck Denson 04:50:34 04/09/02 (1)
        • Re: let it dry first... - Mishast 14:10:10 04/09/02 (0)
• Does anyone have link to the engine weights page? - TCD 18:21:55 04/08/02 (6)
  • Re: Does anyone have link to the engine weights page? - Troy Rudolph 22:30:40 04/08/02 (0)
  • You mean John Burns BMW Nerd page...Here - Lars BendOr e12z 18:52:21 04/08/02 (4)
    • Re: You mean John Burns BMW Nerd page...Here - Derek 14:09:19 04/09/02 (1)
      • His page shows 185 for early 3 liter???? - Lars Bendor e12z 14:34:12 04/09/02 (0)
    • I agree and have been perplexed also,..... But - Lars BendOr e12z 21:36:58 04/08/02 (0)
    • Re: You mean John Burns BMW Nerd page...Here - Frank H 20:20:35 04/08/02 (0)
• OT - Did I miss much?? - Chad Z (yes, a canadian!) 17:13:36 04/08/02 (5)
  • Sorry, I wasnt deliberately staging a beer poll ! - Chad Z 00:01:51 04/09/02 (0)
  • Ha ha, Canadians? Molson's are terrible! - Dean 17:26:10 04/08/02 (3)
    • Re: Ha ha, Canadians? Molson's are terrible! - Derek 10:16:14 04/09/02 (0)
    • but Granville island brewery is awesome! - mikey 20:59:18 04/08/02 (0)
    • Re: Ha ha, Canadians? Molson's are terrible! - Bob Iverach 18:52:11 04/08/02 (0)
• No Spark cont... - Joel 16:50:03 04/08/02 (3)
  • Re: No Spark cont... - Peter Florance 16:57:08 04/08/02 (2)
    • Re: No Spark cont... - Joel 22:53:33 04/08/02 (1)
      • yes - Peter Florance 07:58:38 04/09/02 (0)
• Exhaust Manifold vs. Bavaria "Headers" LONG - Derek 15:12:10 04/08/02 (1)
  • Re: Exhaust Manifold vs. Bavaria "Headers" LONG - Karl 09:03:13 04/09/02 (0)
• hard brake line question - Peter Florance 14:54:23 04/08/02 (3)
  • Re: hard brake line question - Bob Iverach 15:36:30 04/08/02 (2)
    • bubble flare? - Peter Florance 15:43:33 04/08/02 (1)
      • Re: bubble flare? - Walt Barie 11:06:31 04/09/02 (0)
• part numbers anyone? - Steve Chandler 14:28:11 04/08/02 (3)
  • Re: part numbers anyone? - Joel 01:34:21 04/09/02 (2)
    • thanks. nt - Steve C. 06:56:01 04/09/02 (1)
      • part numbers - james 07:47:46 04/09/02 (0)
• Paging Scottie! - Alex Biro 12:46:38 04/08/02 (0)
• weekend project - fred 11:45:07 04/08/02 (5)
  • Read This! - Troy Rudolph 15:26:27 04/08/02 (4)
    • didn't.. - Peter Florance 15:30:20 04/08/02 (3)
      • my '84 735i has/had a 265 - ..tom 18:33:38 04/08/02 (1)
        • Re: my '84 735i has/had a 265 - Troy Rudolph 22:18:44 04/08/02 (0)
      • Maybe - Troy Rudolph 16:52:09 04/08/02 (0)
• ARGGHH!! Chrome mirrors won't fit on my '81 - Adam Wilson 10:18:56 04/08/02 (8)
  • Re: ARGGHH!! Chrome mirrors won't fit on my '81 - Bob Iverach 15:24:21 04/08/02 (0)
  • Re: ARGGHH!! Chrome mirrors won't fit on my '81 - Kaveman 10:34:49 04/08/02 (6)
    • drilling - Adam Wilson 10:56:37 04/08/02 (5)
      • Re: drilling - Kaveman 11:14:13 04/08/02 (4)
        • Re: drilling - Mark Phillips 15:28:59 04/08/02 (3)
          • Top Bolt!(Sorry)nt - Mark Phillips 23:50:23 04/08/02 (0)
          • Top Bolt!(Sorry)nt - Mark Phillips 23:45:32 04/08/02 (0)
          • Top Bolt!(Sorry)nt - Mark Phillips 23:45:19 04/08/02 (0)
• Paging Randy MaCafferty - DScott 07:08:58 04/08/02 (1)
  • your email doesn't seem to be working - Randy McCafferty 23:10:39 04/08/02 (0)
• Wrecker Prices - Canada Karl 05:37:30 04/08/02 (2)
  • Re: Wrecker Prices - bob Iverach 13:57:01 04/09/02 (0)
  • Re: Wrecker Prices - stewart 06:17:13 04/08/02 (0)
• Serial #'s on Euro Engine Blocks - Alex Biro 01:55:48 04/08/02 (4)
  • Re: Serial #'s on Euro Engine Blocks - Alex Biro 01:58:00 04/08/02 (3)
    • Re: Serial #'s on Euro Engine Blocks - Frank H 11:58:58 04/08/02 (2)
      • Re: Serial #'s on Euro Engine Blocks - Mishast 19:00:38 04/08/02 (1)
        • Re: Serial #'s on Euro Engine Blocks - Frank H 19:57:24 04/08/02 (0)
• 528i Wheel Specs - Mark Dvorak 22:57:32 04/07/02 (1)
  • Re: 528i Wheel Specs - Troy Rudolph 23:16:37 04/07/02 (0)
• Paging Canadakarl - DScott 20:23:55 04/07/02 (0)
• automotive therapy - Chuck Denson 17:49:29 04/07/02 (0)
• Re: AFM Spring tension - Ellis 15:48:49 04/07/02 (0)
• 7 litres reserve fuel? - Remy Davison 10:41:02 04/07/02 (0)
• Paging Joel - no spark - Peter Florance 07:17:09 04/07/02 (0)
• AMC Head on Ebay - Jim Hineline 01:22:15 04/07/02 (0)
• ignition switch? - Jimmie 21:44:44 04/06/02 (4)
  • Re: ignition switch? - Jimmie 13:18:55 04/08/02 (0)
  • Re: ignition switch? - Peter Claassen 10:44:26 04/08/02 (0)
  • Re: ignition switch? - Kaveman 18:16:02 04/07/02 (0)
  • it's the switch that's worn out - ..tom 07:10:35 04/07/02 (0)
• Shock Towers - Canada Karl 20:39:19 04/06/02 (5)
  • Re: Shock Towers - Eddie Ribeiro 11:46:07 04/08/02 (2)
    • Re: Shock Towers - T.Han 15:32:02 04/08/02 (1)
      • Re: Shock Towers - Eddie Ribeiro 09:27:41 04/09/02 (0)
  • Re: Shock Towers - Sam Schultz 10:56:14 04/07/02 (0)
  • Re: Shock Towers - T.Han 20:59:10 04/06/02 (0)
• Thanks Peter Florance - Joel 18:35:27 04/06/02 (1)
  • Re: Thanks Peter Florance - Peter Florance 20:14:10 04/06/02 (0)
• No spark - Joel 18:33:19 04/06/02 (4)
  • Re: No spark - Peter Florance 20:15:19 04/06/02 (3)
    • Re: No spark - Joel 06:34:33 04/07/02 (2)
      • no... - Peter Florance 07:07:38 04/07/02 (1)
        • Thanks... - Joel 19:32:30 04/07/02 (0)
• closed vs. open loop lambda - Robert Bondi 18:28:56 04/06/02 (9)
  • Re: closed vs. open loop lambda - Don Daynes 13:21:11 04/08/02 (1)
    • Re: closed vs. open loop lambda - Robert Bondi 22:58:06 04/08/02 (0)
  • Re: closed vs. open loop lambda - Troy Rudolph 16:15:03 04/07/02 (3)
    • I agree with those definitions - Robert Bondi 17:33:06 04/07/02 (2)
      • Re: I agree with those definitions - Troy Rudolph 17:53:29 04/07/02 (1)
        • I have exhaust gas numbers - Robert Bondi 18:45:26 04/07/02 (0)
  • Re: closed vs. open loop lambda - Peter Florance 20:12:48 04/06/02 (2)
    • FI temp sensor in spec... - Robert Bondi 08:23:09 04/07/02 (0)
    • Thanks Peter - Robert Bondi 20:43:38 04/06/02 (0)
• 77 530i door handle - Morgan Taylor 18:15:07 04/06/02 (3)
  • Re: 77 530i door handle - Jeff Ross 12:36:51 04/09/02 (0)
  • Re: 77 530i door handle - Lou Lazo 21:19:36 04/06/02 (1)
    • Re: 77 530i door handle - Morgan Taylor 21:44:45 04/06/02 (0)
• Broke the tired old thing out today. (Long) - Carlie Bentley 17:40:11 04/06/02 (0)
• OT, mostly for T. Han - Kevin Kew 17:09:00 04/06/02 (2)
  • Re: OT, mostly for T. Han - T.Han 21:04:59 04/06/02 (1)
    • oh, a mac. - Kevin Kew 08:47:38 04/07/02 (0)
• This weekend's progress - Peter Florance 16:51:49 04/06/02 (0)
• Can't find shifter bushings for '76 530i. - Tim 13:29:14 04/06/02 (2)
  • Re: Can't find shifter bushings for '76 530i. - Derek 09:02:23 04/08/02 (0)
  • Re: Can't find shifter bushings for '76 530i. - Kaveman 15:44:52 04/06/02 (0)
• Need Engine - Dave Farrell 12:48:46 04/06/02 (1)
  • Re: Need Engine - Kaveman 17:49:41 04/06/02 (0)
• Fuel pressure gauge - Ellis 01:58:50 04/06/02 (3)
  • Re: Fuel pressure gauge - Robert Bondi 17:47:05 04/06/02 (0)
  • Re: Fuel pressure gauge - Peter Florance 07:30:18 04/06/02 (1)
    • That is where I put mine... - Dave Spencer 08:11:22 04/06/02 (0)
• 81 528i wanted in Canada - Crispy 01:19:38 04/06/02 (1)
  • Re: 81 528i wanted in Canada - Bob Iverach 16:50:47 04/08/02 (0)
• Re: fuel mixture is too rich - Ellis 23:44:58 04/05/02 (0)
• Choosing M30 and installing cam w/out pulling head - Alex Biro 21:50:12 04/05/02 (3)
  • Re: Choosing M30 and installing cam w/out pulling head - Mark 09:21:44 04/06/02 (0)
  • Re: Choosing M30 and installing cam w/out pulling head - Peter Florance 06:39:54 04/06/02 (1)
    • Re: Choosing M30 and installing cam w/out pulling head - Alex Biro 14:56:38 04/06/02 (0)
• idle - JamesB N.C. 19:13:05 04/05/02 (2)
  • Re: idle - Peter Florance 06:01:07 04/06/02 (0)
  • Re: idle - Kaveman 20:57:06 04/05/02 (0)
• Diagnose This... - Mishast 18:57:44 04/05/02 (10)
  • Re: Diagnose This... - Mishast 12:15:04 04/08/02 (0)
  • Re: Diagnose This... - DScott 22:05:59 04/07/02 (1)
    • Re: Diagnose This... - Mishast 12:17:56 04/08/02 (0)
  • Re: Diagnose This...Timing? - Remy Davison 08:52:55 04/06/02 (0)
  • Re: Diagnose This... - Peter Florance 05:55:02 04/06/02 (0)
  • In my experience, vapor lock is a total SD - Lars BendOr e12z 22:37:58 04/05/02 (1)
    • Marginal vaporlock - Steve 14:00:47 04/06/02 (0)
  • Re: Diagnose This... - Kaveman 20:59:29 04/05/02 (1)
    • Re: Diagnose This... - Mishast 12:24:16 04/08/02 (0)
  • Re: Diagnose This... - Scott 20:23:52 04/05/02 (0)
• Return from Mass. - Steve C. 15:47:43 04/05/02 (0)
• Shift Knob for sale amoung other stuff... - Steve C. 15:43:13 04/05/02 (0)
• Paging Iroquois in LONDON - Jeff Ross 15:10:51 04/05/02 (0)
• Saw this listed locally in the Bay Area.. NO Afill - Kaveman 10:17:51 04/05/02 (3)
  • Nice, but it looks like the original color was - Scott 13:36:53 04/05/02 (0)
  • Very clean looking car... - David P 11:46:16 04/05/02 (1)
    • Re: Very clean looking car... - Mark80528i 12:26:14 04/05/02 (0)
• It's official, I've gone to the dark side.... - Frank H 10:08:11 04/05/02 (15)
  • My 1st bimmer was a '70 2800... great car! - Lars BendOr e12z 14:09:32 04/05/02 (2)
    • Re: My 1st bimmer was a '70 2800... great car! - Frank H 17:42:39 04/05/02 (1)
      • Try this fellow... in Eugene. - Lars BendOr e12z 22:42:53 04/05/02 (0)
  • Re: It's official, I've gone to the dark side.... - Troy Rudolph 13:58:04 04/05/02 (3)
    • Re: It's official, I've gone to the dark side.... - Frank H 17:48:15 04/05/02 (0)
    • WHOA now Junior.....let' not get carried away.... - Scott 14:26:30 04/05/02 (1)
      • Oh yeah! - Troy Rudolph 14:43:52 04/05/02 (0)
  • Re: It's official, I've gone to the dark side.... - Adam Wilson 12:48:11 04/05/02 (0)
  • Paging Bill Bowes - Peter Florance 11:27:56 04/05/02 (4)
    • Re: Paging Bill Bowes - Troy Rudolph 13:55:07 04/05/02 (2)
      • Re: Paging Bill Bowes - Peter Florance 15:49:56 04/05/02 (1)
        • Re: Paging Bill Bowes - Troy Rudolph 16:56:19 04/05/02 (0)
    • Re: Paging Bill Bowes - Adam Wilson 12:29:00 04/05/02 (0)
  • Anyone that uses triple Webers is cool in my book! - Scott 10:18:46 04/05/02 (1)
    • Re: Anyone that uses triple Webers is cool in my book! - Jake Hall 19:59:15 04/06/02 (0)
• Euro Bumpers & M535i Spoiler - Alan Abreu 10:04:38 04/05/02 (6)
  • cost of installation - Adam Wilson 12:34:51 04/05/02 (0)
  • Re: Euro Bumpers & M535i Spoiler - Sam R. 12:19:19 04/05/02 (0)
  • Re: Euro Bumpers & M535i Spoiler - Jake Hall 10:54:38 04/05/02 (0)
  • Re: Euro Bumpers & M535i Spoiler - Don Daynes 10:29:03 04/05/02 (2)
    • Re: Euro Bumpers & M535i Spoiler - Alan Abreu 10:57:04 04/05/02 (1)
      • Re: Euro Bumpers & M535i Spoiler - Don Daynes 11:45:28 04/05/02 (0)
• Any interest in '76 528 road test? - Remy Davison 08:33:10 04/05/02 (1)
  • I would love to read it...........nt - Scott 09:07:16 04/05/02 (0)
• E32 parts in an E12 - Wayne W. 07:20:41 04/05/02 (1)
  • Re: E32 parts in an E12 - Derek 11:27:05 04/05/02 (0)
• Ryan Brians Bimmer - Mark Dvorak 00:39:13 04/05/02 (2)
  • Re: Ryan Brians Bimmer - TCD 07:01:33 04/05/02 (1)
    • Thats correct... - Ryan Bryan 16:21:12 04/05/02 (0)
• Rocker shaft orientation question - Peter Zolski 23:31:53 04/04/02 (1)
  • Re: Rocker shaft orientation question - Peter Florance 06:01:21 04/05/02 (0)
• Head reassembly...cam & rocker installation - Bill Barrett 20:20:04 04/04/02 (14)
  • Having just done this 2k ago...I remember - Scott 09:02:25 04/05/02 (2)
    • Longer than expected??? - Dave Spencer 09:14:26 04/05/02 (1)
      • I stand Corrected, thank you Dave....nt - Scott 09:34:45 04/05/02 (0)
  • Re: Head reassembly...cam & rocker installation - Peter Florance 20:34:14 04/04/02 (10)
    • Re: Head reassembly...cam & rocker installation - Bill Barrett 20:58:34 04/04/02 (9)
      • Re: Head reassembly...cam & rocker installation - Randy Clark 22:08:42 04/04/02 (1)
        • Re: Head reassembly...cam & rocker installation - Robert Bondi 22:42:32 04/04/02 (0)
      • no, I'm full of... - Peter Florance 21:12:45 04/04/02 (6)
        • valve job / tool needed.. - tom 21:43:13 04/04/02 (5)
          • Re: valve job / tool needed... - Frank H 00:11:05 04/05/02 (3)
            • Re: valve job / tool needed... - Patrick 06:36:14 04/05/02 (0)
            • newer style rocker shafts... - Peter Florance 06:02:57 04/05/02 (0)
            • I confess... - Peter Florance 05:58:48 04/05/02 (0)
• Smelly exhaust at idle - Steve 17:31:55 04/04/02 (2)
  • Re: Smelly exhaust at idle - greghill 20:07:00 04/04/02 (0)
  • Re: Smelly exhaust at idle - T.Han 19:46:20 04/04/02 (0)
• Paint Color - Derek 14:17:16 04/04/02 (9)
  • Re: Paint Color - peter claassen 11:07:43 04/05/02 (0)
  • Thanks everyone - especially Remy - - Derek 09:33:40 04/05/02 (0)
  • If it is Arktsiblau-metallic, you can look at - Lars BendOr e12z 23:15:44 04/04/02 (0)
  • Re: Paint Color - Robert Bondi 15:31:54 04/04/02 (0)
  • Re: Paint Color - Scott 14:46:56 04/04/02 (4)
    • Sticker Gone or Worn Off - Derek 16:57:41 04/04/02 (3)
      • Fjord Blue? - Robert Bondi 21:29:46 04/04/02 (0)
      • Probably Arktisblau-metallic - JB 19:06:54 04/04/02 (1)
        • Re: Probably Arktisblau-metallic - Remy Davison 08:35:42 04/05/02 (0)
• 81 528i 5spd 4-sale...lots of mods, euro bmpr - Adam 12:58:37 04/04/02 (1)
  • CAR LOCATED IN WESTERN MASS - ADAM 12:59:47 04/04/02 (0)
• very nice E-12 w/euro bumpers seen today... - Timmer 11:47:42 04/04/02 (0)
• Re: Floor Mat Poll (I'm back and am I surprised!) - Dave Spencer 09:27:34 04/04/02 (2)
  • Re: Floor Mat Poll (I'm back and am I surprised!) - Klaus Wiehl 13:50:56 04/04/02 (1)
    • 18-March-1965 (nt) - Dave Spencer 18:22:03 04/04/02 (0)
• Re: Floor Mat Poll (I'm back and am I surprised!) - Dave Spencer 09:26:37 04/04/02 (3)
  • Re: Floor Mat Poll (I'm back and am I surprised!) - Mark80528i 12:27:48 04/04/02 (1)
    • Pedal set... - Dave Spencer 16:21:44 04/04/02 (0)
  • Congrats , they look great! Happy Bday and - Scott 09:34:09 04/04/02 (0)
• lambda FI troubleshoot - Robert Bondi 02:54:16 04/04/02 (2)
  • Re: lambda FI troubleshoot - Mark 07:18:01 04/04/02 (1)
    • Bosch -011... - Robert Bondi 15:28:48 04/04/02 (0)
• 77 530i For Sale ( Really this Time)... - Catfish 23:18:06 04/03/02 (3)
  • What color? - Dean 11:57:32 04/04/02 (1)
    • Clarification: Driveshaft needed also..... - Catfish 21:03:25 04/04/02 (0)
  • Re: 77 530i For Sale ( Really this Time)... - Lou Lazo 08:41:41 04/04/02 (0)
• Autobahn - like stretch of road! - Canada Karl 21:28:55 04/03/02 (3)
  • Re: Autobahn - like stretch of road! - Derek 14:23:38 04/04/02 (0)
  • Re: Autobahn - like stretch of road! - Bob Iverach 11:55:31 04/04/02 (0)
  • Re: Autobahn - like stretch of road! - Crispy 00:23:59 04/04/02 (0)
• three bmw steering wheels - ...tom 19:08:51 04/03/02 (7)
  • I cut and pasted the properties of your 1st - Lars BendOr e12z 19:41:29 04/03/02 (1)
    • My mistake-linked to album... not pic - Lars BendOr e12z 19:44:37 04/03/02 (0)
  • Re: three bmw steering wheels - Peter Florance 19:22:28 04/03/02 (2)
    • Re: three bmw steering wheels - ...tom 19:35:30 04/03/02 (1)
      • Re: three bmw steering wheels - Lance Lattrulo 19:39:17 04/03/02 (0)
  • why didn't picture work? - ...tom 19:12:01 04/03/02 (1)
    • try again - ...tom 19:18:30 04/03/02 (0)
• Dist. Question - Blair 18:11:44 04/03/02 (2)
  • Re: Dist. Question - Peter Florance 18:32:02 04/03/02 (1)
    • Re: Dist. Question - Randy Clark 23:55:17 04/03/02 (0)
• Unknown Hose - Lou Lazo 18:06:44 04/03/02 (5)
  • Re: Unknown Hose - Peter Florance 18:46:11 04/03/02 (4)
    • Re: Unknown Hose - Lou 20:24:29 04/03/02 (3)
      • Re: Unknown Hose - Peter Florance 20:52:25 04/03/02 (2)
        • Re: Unknown Hose - Lou 21:33:45 04/03/02 (1)
          • Re: Unknown Hose - Peter Florance 06:58:40 04/04/02 (0)
• I thought i was the only Canadian - Lance Lattrulo 17:06:28 04/03/02 (18)
  • Re: I thought i was the only Canadian with Parts - Jeff Ross 21:31:20 04/04/02 (2)
    • Re: I thought i was the only Canadian with Parts - Jeff Ross 15:02:34 04/05/02 (0)
    • Re: I thought i was the only Canadian with Parts - Canadian Bimmer 05:45:35 04/05/02 (0)
  • Re: I thought i was the only Canadian - Eddie 09:51:17 04/04/02 (0)
  • Re: I thought i was the only Canadian - Ellis 04:54:26 04/04/02 (2)
    • Re: I thought i was the only Canadian - Canada Karl 17:02:34 04/04/02 (1)
      • Re: I thought i was the only Canadian - Ellis 07:31:05 04/05/02 (0)
  • Re: I thought i was the only Canadian - Alex Biro 01:54:41 04/04/02 (2)
    • Re: I thought i was the only Canadian - Derek 08:55:08 04/04/02 (1)
      • Re: I thought i was the only Canadian - Alex Biro 21:37:40 04/05/02 (0)
  • Re: I thought i was the only Canadian - Villy 21:48:27 04/03/02 (1)
    • Re: I thought i was the only Canadian - Derek 09:03:29 04/04/02 (0)
  • Re: I thought i was the only Canadian - Canada Karl 21:05:32 04/03/02 (1)
    • Re: I thought i was the only Canadian - Lance Lattrulo 22:01:13 04/03/02 (0)
  • Re: I thought i was the only Canadian - Bob Iverach 19:20:29 04/03/02 (2)
    • BEST BIMMER PARTS YARD?!?! - Blair 21:14:42 04/03/02 (1)
      • Re: BEST BIMMER PARTS YARD?!?! - Bob Iverach 12:18:08 04/04/02 (0)
  • Re: I thought i was the only Canadian - Blair 18:01:51 04/03/02 (0)
• Good price on 1988 M5? - Mishast 16:04:07 04/03/02 (3)
  • Those cars are very expensive to fix. - Dean 11:50:00 04/04/02 (0)
  • Re: Good price on 1988 M5? - Frank H 17:39:41 04/03/02 (0)
  • Re: Good price on 1988 M5? - Adam Wilson 17:17:22 04/03/02 (0)
• I need an honest answer about Bavaria manifolds - Jeff C 15:42:48 04/03/02 (5)
  • Re: I need an honest answer about Bavaria manifolds - Eddie 16:12:14 04/04/02 (0)
  • Honestly.... I don't know for sure... But>> - Lars BendOr e12z 19:29:58 04/03/02 (0)
  • Re: I need an honest answer about Bavaria manifolds - Kaveman 17:04:42 04/03/02 (0)
  • Re: I need an honest answer about Bavaria manifolds - Troy Rudolph 16:24:29 04/03/02 (0)
  • Re: I need an honest answer about Bavaria manifolds - Peter Florance 16:11:20 04/03/02 (0)
• Need Mechanical Advance Dist for 82' 3.3L - Stuart McMillan 15:35:14 04/03/02 (12)
  • I have two of them.... - Catfish 22:54:40 04/03/02 (1)
    • Re: I have two of them.... - Patrick 06:51:47 04/05/02 (0)
  • U.S./Euro distributors - Bill Barrett 21:58:39 04/03/02 (2)
    • Re: U.S./Euro distributors - Stuart McMillan 11:42:44 04/04/02 (1)
      • Re: U.S./Euro distributors - Peter Florance 18:34:09 04/04/02 (0)
  • Re: Need Mechanical Advance Dist for 82' 3.3L - Don Daynes 18:16:12 04/03/02 (2)
    • Re: Need Mechanical Advance Dist for 82' 3.3L - Stuart McMillan 11:44:23 04/04/02 (0)
    • Re: Need Mechanical Advance Dist for 82' 3.3L - Troy Rudolph 20:04:11 04/03/02 (0)
  • Re: Need Mechanical Advance Dist for 82' 3.3L - Troy Rudolph 16:26:51 04/03/02 (1)
    • Re: Need Mechanical Advance Dist for 82' 3.3L - Peter Florance 16:45:28 04/03/02 (0)
  • Re: Need Mechanical Advance Dist for 82' 3.3L - Peter Florance 16:14:22 04/03/02 (1)
    • Re: Need Mechanical Advance Dist for 82' 3.3L - Steve Kirby 23:39:21 04/03/02 (0)
• Grill Badge - Derek 14:26:26 04/03/02 (1)
  • I'm working on it currently, will advise (nt) - Adam Wilson 14:33:49 04/03/02 (0)
• Is it the fuel pump? - Collins 08:42:48 04/03/02 (5)
  • Re: Is it the fuel pump? - Peter Florance 18:52:36 04/04/02 (0)
  • Re: Is it the fuel pump? - funfer 15:58:26 04/03/02 (3)
    • This sounds REAL familiar (like this morning)... - Dave Spencer 09:50:33 04/04/02 (1)
      • thermotime switch - Robert Bondi 20:28:08 04/04/02 (0)
    • Re: Is it the fuel pump? - Collins 16:26:00 04/03/02 (0)
• every day is a mini 5 fest in Wilmington! - Chuck Denson 07:55:44 04/03/02 (8)
  • And the fest from the West Coast... - Lars BendOr e12z 19:18:28 04/03/02 (2)
    • Hen's Teeth around here! - Chuck Denson 03:01:04 04/04/02 (1)
      • It's due to the migration from the South - Lars BendOr 08:25:34 04/04/02 (0)
  • I'd love to move there to be closer... - funfer 15:47:47 04/03/02 (0)
  • 2 e12s in my driveway, wilmington, delaware - ...tom 12:33:25 04/03/02 (1)
    • Sounds like a wonderful dream... - Chuck Denson 02:46:51 04/04/02 (0)
  • Re: every day is a mini 5 fest in Wilmington! - Sam Schultz 10:23:54 04/03/02 (1)
    • Re: every day is a mini 5 fest in Wilmington! - Chuck Denson 11:21:44 04/03/02 (0)
• Exhaust manifolds Thanks for info.Great Site! - Canada Karl 06:36:18 04/03/02 (1)
  • Re: Exhaust manifolds Thanks for info.Great Site! - Peter Florance 06:53:53 04/03/02 (0)
• anyone have a 745i motor to sell?? - adam 00:11:18 04/03/02 (0)
• Nobody Answered the question!! - Canada Karl 21:09:42 04/02/02 (8)
  • Re: Nobody Answered the question!! - Derek 09:32:45 04/03/02 (3)
    • northern climates - Robert Bondi 13:53:22 04/03/02 (2)
      • Re: northern climates - Derek 14:24:54 04/03/02 (1)
        • Re: northern climates - Bob Iverach 15:02:35 04/03/02 (0)
  • Re: Nobody Answered the question!! - Peter Florance 23:00:24 04/02/02 (0)
  • Bavaria headers--- Stock exhaust from the Earlier - Lars BendOr 21:33:07 04/02/02 (0)
  • Re: Nobody Answered the question!! - Troy Rudolph 21:26:23 04/02/02 (1)
    • Re:Save the Questions! Buy them off me Now!! - Blair 23:08:34 04/02/02 (0)
• misfire while decelerating - Lance Lattrulo 21:07:50 04/02/02 (1)
  • Re: misfire while decelerating - Peter Florance 07:42:08 04/03/02 (0)
• parting out 80 528i - marc 20:49:46 04/02/02 (1)
  • Re: parting out 80 528i - Patrick 06:56:07 04/05/02 (0)
• good sub for door plastic film? - ...tom 16:24:34 04/02/02 (2)
  • Re: good sub for door plastic film? - Peter Florance 19:44:20 04/02/02 (1)
    • Re: good sub for door plastic film? - T.Han 20:27:46 04/02/02 (0)
• Greetings - Morgan Taylor 16:03:00 04/02/02 (1)
  • Oh Yes, Oh Yes! - Chuck Denson 16:30:01 04/02/02 (0)
• 79 528i Avialable...Offers.... - Kaveman 14:36:49 04/02/02 (1)
  • BTW... It's in SF (nt) - Kaveman 14:37:37 04/02/02 (0)
• Let's trade - Greg 12:37:59 04/02/02 (0)
• What is a good steering wheel replacement... - Andre528i 11:25:49 04/02/02 (4)
  • Re: What is a good steering wheel replacement... - Peter Claassen 15:42:42 04/02/02 (2)
    • That 7 series 3 spoke is a NICE wheel. almost as> - Lars BendOr e12z 18:08:17 04/02/02 (0)
    • Hey Peter, do you have any pictures of it? - Andre528i 15:52:33 04/02/02 (0)
  • Sorry... spline change in early 80's - Lars BendOr e12z 15:15:48 04/02/02 (0)
• 77'530i Thermal Reactor Replacement - CGW 10:01:03 04/02/02 (0)
• Hollow sucking sound - Kevin Kew 09:17:32 04/02/02 (2)
  • Re: Hollow sucking sound - Peter Florance 09:23:49 04/02/02 (1)
    • Re: Hollow sucking sound - T.Han 12:11:05 04/02/02 (0)
• Re:pulse dampners - Ellis 07:30:26 04/02/02 (4)
  • they're on my e28, not the e12 - ...tom 09:05:53 04/02/02 (0)
  • Re: Re:pulse dampners - Peter Florance 07:48:01 04/02/02 (2)
    • Re: Re:pulse dampners - Ellis 08:10:02 04/02/02 (1)
      • Re: Re:pulse dampners - Peter Florance 06:58:00 04/05/02 (0)
• Rear strut mount replacement? - Alex Biro 03:13:07 04/02/02 (4)
  • Re: Rear strut mount replacement? - Don Daynes 11:29:29 04/02/02 (0)
  • Re: Rear strut mount replacement? - Troy Rudolph 09:46:44 04/02/02 (2)
    • Re: Rear strut mount replacement? - T.Han 12:19:23 04/02/02 (1)
      • Re: Rear strut mount replacement? - Troy Rudolph 14:12:48 04/02/02 (0)
• Help with Buying 3.5 M30 - Alex Biro 01:23:20 04/02/02 (6)
  • Re: Help with Buying 3.5 M30 - Troy Rudolph 09:51:40 04/02/02 (5)
    • Re: Help with Buying 3.5 M30 (Troy) - Mishast 15:04:18 04/02/02 (4)
      • '75 530i has L-Jet - Troy Rudolph 15:12:58 04/02/02 (3)
        • Re: '75 530i has L-Jet - Mishast 17:01:09 04/02/02 (2)
          • lambda conv FAQ - Robert Bondi 01:01:21 04/03/02 (0)
          • Re: '75 530i has L-Jet - Troy Rudolph 21:30:07 04/02/02 (0)
• 528i only one with Lamba L-jet? - Blair 20:21:31 04/01/02 (1)
  • Re: 528i only one with Lamba L-jet? - Peter Florance 20:35:12 04/01/02 (0)
• F.S. '78 530i... - Mike 20:05:28 04/01/02 (0)
• Progress on the 'new' 528i - Peter Florance 19:37:31 04/01/02 (2)
  • YEP! e-mail me. - Lars BendOr 19:48:08 04/01/02 (1)
    • done - Peter Florance 19:52:40 04/01/02 (0)
• Hey Derek - Cluster photo - Peter Florance 19:33:08 04/01/02 (4)
  • Re: Hey Derek - Cluster photo-LONG - Derek 09:12:56 04/02/02 (1)
    • Re: Hey Derek - Cluster photo-LONG - Peter Florance 03:48:58 04/03/02 (0)
  • Ooops- Had me on that one. Kinda disappointed! - Lars BendOr e12z 22:59:23 04/01/02 (1)
    • wob response. - Peter Florance 06:40:00 04/02/02 (0)
• How do you do a compression test? - Mr. Coffey 17:40:45 04/01/02 (4)
  • So that there is air to compress..... - Lars BendOr e12z 19:09:34 04/01/02 (2)
    • Thanks for the humorous but useful input - Mr. Coffey 20:14:29 04/01/02 (1)
      • Funnin' a bit, but serious on the extra process - Lars BendOr e12z 22:23:22 04/01/02 (0)
  • Re: How do you do a compression test? - Don Daynes 18:17:39 04/01/02 (0)
• switch to electronic ignition - Lance Lattrulo 17:12:17 04/01/02 (2)
  • Re: switch to electronic ignition - Mishsast 18:01:42 04/01/02 (0)
  • Re: switch to electronic ignition - Troy Rudolph 18:00:58 04/01/02 (0)
• Blinking Break-Wear Light - switzee 13:59:07 04/01/02 (6)
  • Re: Blinking Break-Wear Light - Karl 16:33:42 04/01/02 (3)
    • Re: Blinking Break-Wear Light - Don Daynes 17:21:56 04/01/02 (2)
      • Re: Blinking Break-Wear Light - Karl 07:09:38 04/02/02 (1)
        • Re: Blinking Break-Wear Light - Don Daynes 10:25:01 04/02/02 (0)
  • Re: Blinking Brake-Wear Light - Don Daynes 15:24:35 04/01/02 (0)
  • Re: Blinking Break-Wear Light - Peter Florance 14:52:15 04/01/02 (0)
• lower front valence on euro e12 - Robert Knowlton 11:46:24 04/01/02 (2)
  • Re: lower front valence on euro e12 - Beamher Bob 19:32:11 04/01/02 (0)
  • It isn't welded just seam sealer, usually painted. - Patrick Goss 11:51:50 04/01/02 (0)
• Burning Oil, Give up and Run it, Temp Fix, or Bail - Patrick Goss 10:45:58 04/01/02 (13)
  • ! quart per 2 tanks, Oil cloud on startup and >>> - Lars BendOr e12z 17:39:39 04/01/02 (7)
    • Valve seal Job - Patrick Goss 16:09:20 04/02/02 (6)
      • There are some Urban Myths floating around - Lars BendOr e12z 18:52:31 04/02/02 (5)
        • I wonder.... - Peter Florance 20:01:19 04/02/02 (4)
          • Peter, I think the heat factor is the reason - Lars BendOr e12s 20:17:21 04/03/02 (1)
            • Re: Peter, I think the heat factor is the reason - Peter Florance 07:30:19 04/04/02 (0)
          • Re: I wonder.... - Mark 22:25:17 04/02/02 (1)
            • darn.... - Peter Florance 23:03:14 04/02/02 (0)
  • Re: Burning Oil, Give up and Run it, Temp Fix, or Bail - Troy Rudolph 11:31:31 04/01/02 (1)
    • yeah but.... - Patrick Goss 11:54:27 04/01/02 (0)
  • Re: Burning Oil, Give up and Run it, Temp Fix, or Bail - T.Han 11:09:07 04/01/02 (0)
  • Re: Burning Oil, Give up and Run it, Temp Fix, or Bail - Kaveman 11:04:44 04/01/02 (1)
    • Not sure how much oil.... - Patrick Goss 11:49:21 04/01/02 (0)
• electrical shorts from radio. - will ollison 10:39:58 04/01/02 (4)
  • Re: electrical shorts from radio. - Don Daynes 12:14:19 04/01/02 (0)
  • Re: electrical shorts from radio. - Kaveman 11:00:36 04/01/02 (2)
    • Re: electrical shorts from radio. - will ollison 11:10:49 04/01/02 (1)
      • Re: electrical shorts from radio. - Kaveman 11:46:41 04/01/02 (0)
• Input on "LED" brake light bulbs.... - Scott 08:44:28 04/01/02 (11)
  • Re: Input on "LED" brake light bulbs.... - Kaveman 11:06:53 04/01/02 (0)
  • Re: Input on "LED" brake light bulbs.... - Robert Bondi 09:09:46 04/01/02 (9)
    • rear fog lamps? - Chuck Denson 14:25:55 04/01/02 (5)
      • Re: rear fog lamps? - Karl 16:44:29 04/01/02 (2)
        • electrical theory is rusty... - Chuck Denson 17:03:06 04/01/02 (1)
          • Re: electrical theory is rusty... - Don Daynes 17:34:47 04/01/02 (0)
      • Re: rear fog lamps? - Don Daynes 15:40:48 04/01/02 (0)
      • Nebel Hinten - Peter Florance 15:36:26 04/01/02 (0)
    • one extra bonus... - Peter Florance 09:54:50 04/01/02 (0)
    • I cant wait to see em.... - Scott 09:44:48 04/01/02 (1)
      • Re: I cant wait to see em.... - Robert Bondi 10:53:14 04/01/02 (0)
• 78 5301 marker light - AUDIOTEK 06:32:41 04/01/02 (0)
• 78 5301 marker light - AUDIOTEK 06:32:34 04/01/02 (0)
• Pic of the $400 528i - Peter Florance 06:16:17 04/01/02 (1)
  • Yer new car looks very nice (nt) - James 02:42:44 04/02/02 (0)
• Dash bulb replacement - Joel 323 03:21:57 04/01/02 (7)
  • long answer - Peter Florance 05:18:39 04/01/02 (6)
    • Re: long answer - Derek 09:17:03 04/01/02 (5)
      • I'm pretty much in the same situation... - Andre528i 11:12:40 04/02/02 (0)
      • Re: long answer - Peter Florance 09:21:38 04/01/02 (3)
        • Re: long answer - Joel 323 18:43:39 04/02/02 (2)
          • hmm... - Peter Florance 03:33:57 04/03/02 (1)
            • Re: hmm... - Joel 323 01:12:04 04/05/02 (0)
• Car of the Month - April - Troy Rudolph (Webmaster) 23:09:07 03/31/02 (2)
  • Re: Car of the Month - April - Marc 04:07:29 04/01/02 (1)
    • You are right Marc. Toast. - Trubey 22:52:34 04/04/02 (0)
• Many, Many THANKS TO TROY RUDOLPH WEBMASTER - ERIK CLEAVER (AKA BIGERIK) 22:40:37 03/31/02 (4)
  • Picture - Troy Rudolph 08:43:01 04/01/02 (0)
  • Re: Many, Many THANKS TO TROY RUDOLPH WEBMASTER - Don Daynes 01:37:37 04/01/02 (0)
  • BIGERIK!! VERY CLEAN , LOOKS GREAT!!!!!!!!!!nt - John R. Bodden 01:32:16 04/01/02 (0)
  • You're very welcome. (nt) - Troy Rudolph 23:05:35 03/31/02 (0)
• The Beast Lives! - Jim Hineline 22:12:22 03/31/02 (2)
  • Re: The Beast Lives! - stewart 07:06:55 04/01/02 (0)
  • Re: The Beast Lives! - Robert Bondi 00:12:18 04/01/02 (0)
• Brake Line Question - Peter Florance 21:54:05 03/31/02 (8)
  • Re: Brake Line Question - Mark 07:16:46 04/01/02 (0)
  • Re: Brake Line Question - Jim Hineline 22:15:36 03/31/02 (6)
    • Re: Brake Line Question - Peter Florance 05:01:11 04/01/02 (5)
      • Re: Brake Line Question - Bob Iverach 15:30:01 04/03/02 (1)
        • Re: Brake Line Question - Peter Florance 19:25:13 04/03/02 (0)
      • Re: Brake Line Question - Don Daynes 10:59:16 04/01/02 (1)
        • Re: Brake Line Question - Peter Florance 11:03:02 04/01/02 (0)
      • Re: Brake Line Question - Jim Hineline 10:39:52 04/01/02 (0)
• Euro headlight - Don Daynes 19:11:12 03/31/02 (5)
  • Dude that is DOPE! How is the output? ? - Trubey 20:12:03 03/31/02 (4)
    • Re: Dude that is DOPE! How is the output? ? - Don Daynes 01:34:47 04/01/02 (2)
      • glad you came to the Cibie camp! - Adam Wilson 13:41:52 04/01/02 (1)
        • Re: glad you came to the Cibie camp! - Don Daynes 13:48:45 04/01/02 (0)
    • Re: Dude that is DOPE! How is the output? ? - Peter Florance 20:15:52 03/31/02 (0)
• Door mounted tweeters - Don Daynes 19:06:44 03/31/02 (4)
  • Re: Door mounted tweeters - Steve Kirby 20:51:03 03/31/02 (3)
    • Re: Door mounted tweeters - Don Daynes 00:55:28 04/01/02 (2)
      • Re: Door mounted tweeters - Kaveman 11:08:53 04/01/02 (1)
        • Amps - Don Daynes 11:35:02 04/01/02 (0)
• Rear Headrests - Don Daynes 18:58:48 03/31/02 (0)
• The new 528i - chore list - Peter Florance 17:19:30 03/31/02 (3)
  • E-mail me on parts..... >>>> - Lars BendOr 22:45:17 03/31/02 (1)
    • Re: E-mail me on parts..... >>>> - Peter Florance 05:02:40 04/01/02 (0)
  • Re: The new 528i - chore list - T.Han 18:52:06 03/31/02 (0)
• Happy Easter people! - Scott 08:55:17 03/31/02 (3)
  • Have fun, please but remember why we celebrate... - funfer 17:05:26 03/31/02 (2)
    • How was the Steven Curtis Chapman concert? - Ryan Bryan 17:37:36 03/31/02 (1)
      • Words do not describe..... - funfer 20:21:21 04/02/02 (0)
• Lars and Frank are right.... - Peter Florance 14:04:43 03/30/02 (6)
  • Now, Peter, don't blame your compulsions on me! - Frank H 12:03:18 03/31/02 (1)
    • Re: Now, Peter, don't blame your compulsions on me! - Peter Florance 17:40:09 03/31/02 (0)
  • Obsessive-compulsive, Eccentric, Odd, >>> - Lars Lotta_e12z 16:23:18 03/30/02 (0)
  • Re: Lars and Frank are right.... - T.Han 16:08:12 03/30/02 (0)
  • Re: Lars and Frank are right.... - Mark Phillips 14:32:30 03/30/02 (0)
  • Go Peter! nt - Scott 14:18:11 03/30/02 (0)
• BMW show invite includes 5's/Carlisle Pa May 18th - Randy McCafferty 11:23:24 03/30/02 (1)
  • Re: BMW show invite includes 5's/Carlisle Pa May 18th - Steve Kirby 22:39:03 03/30/02 (0)
• 76 530i No Start - allan 11:13:16 03/30/02 (7)
  • Re: 76 530i No Start - allan 21:21:42 04/03/02 (0)
  • Re: 76 530i No Start - Peter florance 14:02:17 03/30/02 (0)
  • Re: 76 530i No Start - Karl 12:56:21 03/30/02 (4)
    • Re: 76 530i No Start - allan 16:02:35 03/30/02 (3)
      • some other Canadian guys - Robert Bondi 00:43:55 04/01/02 (1)
        • Re: some other Canadian guys - Derek M 09:31:16 04/01/02 (0)
      • Re: 76 530i No Start - Peter Florance 18:36:11 03/30/02 (0)
• Drag results.....for tghose interested - Scott 10:56:31 03/30/02 (16)
  • That Heavy? - Eric Q 21:15:12 03/31/02 (0)
  • Re: Drag results - Don Daynes 21:17:36 03/30/02 (2)
    • Re: Drag results - Scott 09:19:40 03/31/02 (1)
      • Re: Drag results - Don Daynes 19:13:31 03/31/02 (0)
  • Re: Drag results.....for tghose interested - Patrick 11:19:26 03/30/02 (2)
    • Re: Drag results.....for tghose interested - Scott 14:15:23 03/30/02 (1)
      • Excellent! - Eric Q 21:21:03 03/31/02 (0)
  • Re: Drag results.....for tghose interested - Marc 11:18:42 03/30/02 (8)
    • Marc, I'm Sorry , I meant to say it was a - Scott 14:16:49 03/30/02 (7)
      • Re: Marc, I'm Sorry , I meant to say it was a - Marc 20:43:25 03/30/02 (6)
        • I agree..I will get there...on the street - Scott 09:12:46 03/31/02 (4)
          • Re: I agree..I will get there...on the street - Marc 12:32:58 03/31/02 (3)
            • Re: I agree..I will get there...on the street - Don Daynes 18:51:50 03/31/02 (1)
              • Re: I agree..I will get there...on the street - Marc 22:33:54 03/31/02 (0)
            • Korman won't take trade-ins and the stroker... - RussC 16:07:11 03/31/02 (0)
        • Good call - RussC 22:02:51 03/30/02 (0)
• e12 relative performance / economy - Marc 09:38:20 03/30/02 (0)
• Trying to organize East Coast gathering - Randy McCafferty 20:22:13 03/29/02 (3)
  • Re: Trying to organize East Coast gathering - Peter Florance 09:50:04 03/30/02 (0)
  • Re: Trying to organize East Coast gathering - Mike 09:04:37 03/30/02 (0)
  • i plan on going in either case - ...tom 06:06:02 03/30/02 (0)
• Web Board Weirdness? - Peter Florance 16:31:41 03/29/02 (3)
  • classifieds response doesn't seem to work - ...tom 17:04:15 03/29/02 (1)
    • Re: classifieds response doesn't seem to work - Troy Rudolph (Webmaster) 18:06:07 03/29/02 (0)
  • Re: Web Board Weirdness? - Troy Rudolph 16:39:37 03/29/02 (0)
• Came across 1981 M535i for sale. $$$ - Dean 16:25:06 03/29/02 (0)
• Try this... - Wietse 16:22:20 03/29/02 (0)
• Another good idea from Peter - Jeff C 15:35:43 03/29/02 (2)
  • Re: Another good idea from Peter - Peter Florance 16:29:19 03/29/02 (0)
  • Re: Another good idea from Peter - Troy Rudolph 16:24:52 03/29/02 (0)
• Tuneup ?? Idle's high + backfires down hills ? - tom 14:50:40 03/29/02 (3)
  • Re: Tuneup ?? Idle's high + backfires down hills ? - Troy Rudolph 16:15:10 03/29/02 (2)
    • Or an exhaust leak, maybe? - funfer 16:43:59 03/29/02 (1)
      • excessivly rich mixture? check your plugs - mikey 17:55:46 03/29/02 (0)
• Analyze this - Part 4 - Performance still off - Peter Claassen 11:02:43 03/29/02 (2)
  • Try this... - Wietse 19:44:29 03/29/02 (0)
  • easy! shift @ 5k (nt) - greghill 12:01:30 03/29/02 (0)
• laugh, good luck, don't break your shift lever!! - Adam Wilson 09:50:37 03/29/02 (1)
  • that was weird, thought I replied to Scott, sorry - Adam Wilson 09:51:14 03/29/02 (0)
• I have absolutely nothing planned to fix this - Scott 09:33:44 03/29/02 (1)
  • Have fun Scott! Wish I could come....Going to the - funfer 16:45:57 03/29/02 (0)
• grill badge proposal is in the works - Adam Wilson 09:33:20 03/29/02 (6)
  • Count me in! (nt) - Jim Davis 11:20:23 03/31/02 (0)
  • submission #1? - Chuck Denson 02:10:59 03/31/02 (0)
  • If you need design help... - Randy McCafferty 20:03:52 03/29/02 (0)
  • I'm interested in a grille badge.....(nt) - Kaveman 19:45:20 03/29/02 (0)
  • I'm interested - Robert Bondi 14:53:41 03/29/02 (0)
  • Im in! nt - Scott 09:34:55 03/29/02 (0)
• obeidita please contact me about you e12 fs - ...tom 06:50:14 03/29/02 (0)
• Questions about 81 528i - Aaron325e in VA 23:36:55 03/28/02 (6)
  • Welcome to "the" board Aaron. (nt) - Jefflee 07:11:44 03/29/02 (0)
  • Re: Questions about 81 528i - Peter Florance 07:02:17 03/29/02 (1)
    • I should also say.. - Peter Florance 07:03:36 03/29/02 (0)
  • Re: Questions about 81 528i - Robert Bondi 00:49:41 03/29/02 (0)
  • "Built for economy"?? read below.... - Catfish 23:40:52 03/28/02 (1)
    • BMP kit - Marc 04:57:22 03/29/02 (0)
• Pontification on why BMW's get such crappy mpg.... - Catfish 21:53:48 03/28/02 (23)
  • Re: Pontification on why BMW's get such crappy mpg.... - Frank H 10:01:00 03/29/02 (2)
    • Pulse injection vs sequential injection? - Catfish 15:54:38 03/29/02 (1)
      • Re: Pulse injection vs sequential injection? - Troy Rudolph 16:23:11 03/29/02 (0)
  • A Pontification Response... - Eric Q 02:13:04 03/29/02 (6)
    • P.S. - Eric Q 02:25:25 03/29/02 (5)
      • Easy now.... - Catfish 14:42:34 03/29/02 (4)
        • Re: Easy now.... - Troy Rudolph 16:38:16 03/29/02 (3)
          • Breathe in, breath out, in, out... - Eric Q 21:26:01 03/31/02 (2)
            • I don't know Eric, - Peter Florance 05:24:42 04/01/02 (1)
              • Hardy har har... - Eric Q 00:47:05 04/02/02 (0)
  • What crappy? My 81 528i gets 17/24 mpg - Lars BendOr e12z 23:33:38 03/28/02 (0)
  • Re: Pontification on why BMW's get such crappy mpg.... - Troy Rudolph 23:20:36 03/28/02 (0)
  • they have the aerodynamics of a brick! - mikey 22:48:19 03/28/02 (10)
    • Actually not less weight - Robert Bondi 23:18:05 03/28/02 (0)
    • Hey !! My '86 325 gets 25city/32highway nt - Jefflee 22:59:23 03/28/02 (8)
      • Maybe sds.... - Catfish 23:33:24 03/28/02 (4)
        • get out the tar and feathers! - mikey 10:06:18 03/29/02 (1)
          • OK Mikey. Your place to Corvallis. See ya in 3 hrs - Lars BendOr e12z 20:46:55 03/29/02 (0)
        • Re: Maybe sds.... - Frank H 10:06:15 03/29/02 (0)
        • also ignition - Peter Florance 07:05:49 03/29/02 (0)
      • 325i? or e? - mikey 23:05:53 03/28/02 (2)
        • hey! your right! my 528e gets 25 to 30mph - mikey 23:09:46 03/28/02 (1)
          • And , , , It's a BRICK !! - Jefflee 23:28:03 03/28/02 (0)
• Total BMW nice E12 M535i - Jim 21:18:52 03/28/02 (3)
  • And I have the two-part article they wrote last , - Jefflee 22:53:19 03/28/02 (0)
  • Barne & Noble carries the mag..Thanks for tip. - Lars BendOr e12z 21:45:42 03/28/02 (1)
    • Re: Barne & Noble carries the mag..Thanks for tip. - Jim 19:05:36 03/29/02 (0)
• Any good 'boneyards' in the Ft. Lauderdale, , , - Jefflee 17:49:30 03/28/02 (0)
• 320i runners, need 2, anyone have some FS? (nt) - Adam Wilson 16:58:26 03/28/02 (0)
• crazy, complete euro 6 suspension FS on ebay - Adam Wilson 09:33:57 03/28/02 (1)
  • what a deal - Peter Florance 19:47:09 03/28/02 (0)
• Sensor life - T.Han 21:32:14 03/27/02 (1)
  • Re: Sensor life - Robert Bondi 23:57:59 03/27/02 (0)
• E28 turbo, Ahhh, the sweet smell of hp.... - RussC 21:31:49 03/27/02 (1)
  • Oh man, I need to chnge my pants, U rock!!! - Scott 09:35:42 03/28/02 (0)
• What to do with old cylinder head? - Mr. Coffey 21:23:04 03/27/02 (6)
  • Recycler? - Troy Rudolph 21:29:46 03/27/02 (5)
    • Re: Recycler? - Mr. Coffey 01:17:28 03/28/02 (3)
      • Re: Recycler? - Peter Florance 07:06:03 03/28/02 (2)
        • Re: Recycler? - Steve Kirby 19:33:46 03/28/02 (1)
          • Sacramento, CA - Mr. Coffey 20:27:04 03/28/02 (0)
    • Aluminum worth .33 cents/ lb. in GA. (nt) - Jefflee 22:14:12 03/27/02 (0)
• Head temp switch/sensor - Peter Zolski 19:16:37 03/27/02 (2)
  • Re: Head temp switch/sensor - Don Daynes 20:26:59 03/27/02 (0)
  • Re: Head temp switch/sensor - Peter Florance 19:22:56 03/27/02 (0)
• When are the ATL boys.... - funfer 19:04:50 03/27/02 (5)
  • Re: When are the ATL boys.... - Robert Bondi 22:26:12 03/27/02 (0)
  • Where You Been, Son?? We've E-mailed you! - Jefflee 19:45:03 03/27/02 (3)
    • I've got my head burried in many new projects... - funfer 15:14:46 03/28/02 (2)
      • thermovalve - Robert Bondi 21:38:17 03/28/02 (1)
        • Thanks Robert! - funfer 16:42:08 03/29/02 (0)
• Oops! I did it Again...(Britney, release May 2000) - Lars BendOr e12z 17:50:17 03/27/02 (2)
  • Sorry. may have inferred these for sale... Not! - Lars BendOr e12z 17:56:58 03/27/02 (1)
    • Re: Sorry. may have inferred these for sale... Not! - T.Han 21:24:32 03/27/02 (0)
• Miles/Gal. Test - Euro 3.5L , 218hp- CR 5/sp - Jefflee 16:12:01 03/27/02 (1)
  • Re: Miles/Gal. Test - Euro 3.5L , 218hp- CR 5/sp - Jake Hall 16:34:11 03/27/02 (0)
• Hypothetical Question - Patrick Goss 14:22:54 03/27/02 (3)
  • Re: Hypothetical Question - Troy Rudolph 15:31:55 03/27/02 (2)
    • Speaking of fuel pressure... - Ellis 07:19:09 03/28/02 (1)
      • Re: Speaking of fuel pressure... - Peter Florance 08:16:04 03/28/02 (0)
• Boneyards in SF Bay area? - Dean 14:06:10 03/27/02 (6)
  • Re: Boneyards in SF Bay area? - Kaveman 19:30:53 03/27/02 (0)
  • Re: Boneyards in SF Bay area? - Peter Florance 18:48:22 03/27/02 (0)
  • Re: Boneyards in SF Bay area? - Troy Rudolph 15:35:30 03/27/02 (2)
    • Does it have the same sensor inputs? - Dean 17:30:02 03/27/02 (1)
      • Re: Does it have the same sensor inputs? - Troy Rudolph 21:39:01 03/27/02 (0)
  • Oakland(Pick N'Pull) - Mark Phillips 15:34:38 03/27/02 (0)
• Analyze this !! Solved at last - Peter Claassen 12:27:35 03/27/02 (0)
• Peter Clausen! have you tried a different AFM? - mikey 12:01:57 03/27/02 (0)
• first fives stuff, grill badges - Adam Wilson 10:26:45 03/27/02 (10)
  • Re: first fives Roundel?! - Patrick 03:15:20 03/29/02 (0)
  • Doing Hats over here - Eric 17:53:07 03/27/02 (0)
  • Re: first fives stuff, grill badges - Derek 16:30:58 03/27/02 (1)
    • I second that - Mr. Coffey 18:25:14 03/27/02 (0)
  • Re: first fives stuff, grill badges - Frank H 12:20:48 03/27/02 (2)
    • Frank, that logo is way cool... - Adam Wilson 12:43:21 03/27/02 (1)
      • What a beautiful color,,,stands out nicely,,this - Jefflee 13:46:39 03/27/02 (0)
  • Re: first fives stuff, grill badges - Mishast 11:54:20 03/27/02 (0)
  • Re: first fives stuff, grill badges - Troy Rudolph 11:53:58 03/27/02 (1)
    • Im for a Grill badge, AND - Scott 12:15:36 03/27/02 (0)
• Center Bearing Replacement; Any tricks? - Patrick Goss 09:50:13 03/27/02 (5)
  • Re: Center Bearing Replacement; Any tricks? - mikey 11:44:21 03/27/02 (4)
    • FSM = Factory Service Manual - Patrick Goss 14:18:32 03/27/02 (0)
    • Re: Center Bearing Replacement; Any tricks? - T.Han 12:28:50 03/27/02 (2)
      • How could the Factory Service Manual be wrong? - Patrick Goss 14:20:00 03/27/02 (1)
        • Re: How could the Factory Service Manual be wrong? - mikey 22:57:51 03/28/02 (0)
• Powder Coating? - BIGERIK 00:26:19 03/27/02 (7)
  • but an old oven and put it in your shop - Mike 22:34:47 03/28/02 (0)
  • Re: Powder Coating? - Robert Bondi 23:51:09 03/27/02 (0)
  • Don't use your oven in the kitchen - Jeff C 13:41:26 03/27/02 (1)
    • Good point!! - Scott 13:55:07 03/27/02 (0)
  • Re: Powder Coating? - Troy Rudolph 11:44:52 03/27/02 (0)
  • Re: Powder Coating? - Kaveman 09:27:29 03/27/02 (0)
  • Re: Powder Coating? - Scott 09:12:35 03/27/02 (0)
• shift points - matt 23:49:57 03/26/02 (0)
• Hello world - Peter Wang 22:26:42 03/26/02 (2)
  • Spam - please don't read this post - Peter Floranceq 05:41:44 03/27/02 (0)
  • What the HE_L is this ????? nt - Jefflee 22:33:17 03/26/02 (0)
• Suspension Techniques or Intrax - Tony Rod 21:33:22 03/26/02 (5)
  • Re: Suspension Techniques or Intrax - Adam Wilson 09:37:47 03/27/02 (0)
  • Knock off the double posts, please. - Troy Rudolph (Webmaster) 22:06:50 03/26/02 (3)
    • Sorry!! - Tony Rod 22:48:40 03/26/02 (2)
      • Tony, a tip.. - Peter Florance 05:45:43 03/27/02 (1)
        • Thanks Peter. I followed your advice on this and - Jefflee 16:16:14 03/27/02 (0)
• Suspension Techniques or Intrax - Tony Rod 21:33:14 03/26/02 (0)
• 5 Fest shifted forward a week - Robert Bondi 19:27:09 03/26/02 (1)
  • Say What??? - Scott 20:01:13 03/26/02 (0)
• 6 series mirrors on E12? - Matt Evans 16:33:27 03/26/02 (1)
  • Re: 6 series mirrors on E12? - Bob Iverach 17:00:49 03/26/02 (0)
• FS: 1985 M30 cylinder head $100 - TCD 16:06:52 03/26/02 (2)
  • Re: Cam - Troy Rudolph 17:28:27 03/26/02 (1)
    • that's how mine was done (nt) - Peter Florance 17:46:55 03/26/02 (0)
• Adjustable fuel Pressure Reg. - Tony Rod 15:53:31 03/26/02 (1)
  • I can tell that the Mr gasket is pretty much - Scott 08:02:56 03/27/02 (0)
• which wires to start car with bad switch? - ...tom 11:44:47 03/26/02 (3)
  • wired starter directly - ...tom 18:43:31 03/26/02 (0)
  • Re: which wires to start car with bad switch? - Tony Rod 15:50:04 03/26/02 (0)
  • Re: which wires to start car with bad switch? - Peter Florance 12:13:32 03/26/02 (0)
• Gasket 4 Manifold - Tony Rod 22:52:42 03/25/02 (2)
  • We use stock exhaust gaskets... - Robert Bondi 02:30:25 03/26/02 (0)
  • Re: Gasket 4 Manifold - Kaveman 00:04:52 03/26/02 (0)
• Idle Surge - Chris 14:05:39 03/25/02 (2)
  • Re: Idle Surge - Don Daynes 15:21:34 03/25/02 (0)
  • Re: Idle Surge - T.Han 14:19:46 03/25/02 (0)
• FREE(sort of): 2.8 Valve Cover(u pay shipping...) - Kaveman 12:02:58 03/25/02 (0)
• you 45 minutes left..No affil... - Scott 11:48:11 03/25/02 (4)
  • yep, I spread the word to my friend about it - Adam Wilson 12:39:34 03/25/02 (0)
  • now there's a climate... - robert bondi 12:07:29 03/25/02 (2)
    • What the hell is that white stuff??.....More>> - Lars BendOr e12z 20:43:56 03/25/02 (0)
    • Look at that Rear Bumper, Robert !! (nt) - Jefflee 12:10:37 03/25/02 (0)
• Injection ECU detects current or voltage change - Mike 11:07:42 03/25/02 (10)
  • Re: Injection ECU detects current or voltage change - Peter Florance 11:53:30 03/25/02 (9)
    • Ok, guess that would keep the current non variable - Mike 12:09:11 03/25/02 (8)
      • Re: Ok, guess that would keep the current non variable - Peter Florance 12:17:20 03/25/02 (4)
        • Well, that function is built into some transducer, - Mike 12:21:29 03/25/02 (3)
          • One good reason ... - Troy Rudolph 12:32:27 03/25/02 (2)
            • Re: One good reason ... - Peter Florance 20:17:25 03/25/02 (0)
            • Re: One good reason ... - Karl 16:22:31 03/25/02 (0)
      • rather p/v transducer - mike 12:11:56 03/25/02 (2)
        • I guess I m the only one not getting this..... - Scott 12:19:03 03/25/02 (1)
          • I was looking at an m system catalog and dreaming - Mike 12:23:35 03/25/02 (0)
• Megasquirt Kit Status? - tom 11:03:40 03/25/02 (12)
  • Re: Megasquirt Kit Status? - Troy Rudolph 12:12:43 03/25/02 (0)
  • Re: Megasquirt Kit Status? - Peter Florance 11:48:59 03/25/02 (9)
    • Re: Megasquirt Kit Status? - tom 22:37:22 03/25/02 (8)
      • Re: Megasquirt Kit Status? - Peter Florance 15:49:55 03/26/02 (7)
        • Re: Megasquirt Kit Status? - tom 15:59:27 03/27/02 (3)
          • Re: Megasquirt Kit Status? - Peter Florance 07:05:10 03/28/02 (2)
            • megasquirt home page - Peter Florance 20:43:32 03/28/02 (0)
            • Re: Megasquirt Kit Status? - tom 14:40:39 03/28/02 (0)
        • Re: Megasquirt Kit Status? - Frank H 18:36:24 03/26/02 (2)
          • Re: Megasquirt Kit Status? - Peter Florance 20:26:08 03/26/02 (1)
            • Re: Megasquirt Kit Status? - Troy Rudolph 12:53:44 03/27/02 (0)
  • sounds interesting! - Mike 11:08:53 03/25/02 (0)
• complete set of locks with keys on ebay - Adam Wilson 11:03:35 03/25/02 (2)
  • Re: complete set of locks with keys on ebay - Tara Knowles 14:57:02 03/26/02 (1)
    • www.altavista.com has a translator. (nt) - Jefflee 19:05:09 03/26/02 (0)
• subframe swap/ engine support - Peter Florance 09:20:22 03/25/02 (14)
  • time for a 4x4 - David B 00:33:46 03/26/02 (4)
    • Re: time for a 4x4 - Troy Rudolph 13:29:07 03/26/02 (0)
    • one more question - Peter Florance 06:52:09 03/26/02 (2)
      • Re: one more question - David B 23:36:41 03/26/02 (1)
        • Re: one more question - Peter Florance 05:48:51 03/27/02 (0)
  • Re: subframe swap/ engine support - Chuck Denson 09:53:30 03/25/02 (5)
    • Re: subframe swap/ engine support - Troy Rudolph 12:08:50 03/25/02 (4)
      • Don't try and give me the dumbass award! - Chuck Denson 14:00:35 03/25/02 (2)
        • Sorry Chuck - Troy Rudolph 15:15:25 03/25/02 (1)
          • All in fun! - Chuck Denson 16:30:36 03/25/02 (0)
      • Take the engine off the pan !! (LOL) nt - Jefflee 12:12:59 03/25/02 (0)
  • Re: subframe swap/ engine support - Troy Rudolph 09:49:50 03/25/02 (0)
  • Re: subframe swap/ engine support - tom russell 09:38:43 03/25/02 (1)
    • Re: subframe swap/ engine support - Peter Florance 11:46:05 03/25/02 (0)
• Vacation to Massachuestts - Steve C. 08:44:13 03/25/02 (2)
  • Re: Vacation to Massachuestts - Harold 06:07:08 03/30/02 (0)
  • Re: Where abouts in Mass you gonna be? - John in NH 00:02:02 03/26/02 (0)
• Auto-to-Manual Conversion Electrical Help Please - Jim Hineline 00:43:14 03/25/02 (6)
  • Re: Auto-to-Manual Conversion Electrical Help Please - bruce 15:25:08 03/25/02 (0)
  • Re: Auto-to-Manual Conversion Electrical Help Please - Don Daynes 12:51:18 03/25/02 (3)
    • So I was wrong... - Don Daynes 19:54:06 03/25/02 (2)
      • Thanks Don! - Jim Hineline 21:43:07 03/25/02 (1)
        • Re: Thanks Don! me too! - mikey 22:34:43 03/25/02 (0)
  • Re: Auto-to-Manual Conversion Electrical Help Please - Peter Florance 12:19:27 03/25/02 (0)
• Water Pump leakage - bruce 23:56:48 03/24/02 (7)
  • Thanks all for info, & question 4 Don - bruce 15:12:00 03/25/02 (1)
    • Re: Thanks all for info, & question 4 Don - Don Daynes 15:38:32 03/25/02 (0)
  • Re: Water Pump leakage - Don Daynes 11:51:15 03/25/02 (0)
  • Re: Water Pump leakage - robert bondi 10:45:25 03/25/02 (1)
    • Replacement Frequency - Robert Bondi 03:39:51 03/26/02 (0)
  • Could those be Lube hole for the Bearing??nt - Scott 10:40:11 03/25/02 (0)
  • Re: Water Pump leakage - tom russell 09:37:05 03/25/02 (0)
• Had my rear sub-frame mount welded today where - Jefflee 22:56:00 03/24/02 (3)
  • Cool, that was the scariest noise I have ever - Scott 08:08:48 03/25/02 (2)
    • eye, oh yeah - robert bondi 10:20:11 03/25/02 (1)
      • LOL..oh yeah baby..............nt - Scott 10:31:34 03/25/02 (0)
• E21 intake runner FAQ updated - Peter Florance 21:44:43 03/24/02 (0)
• Price of new chrome electric mirrors - Matt 15:17:29 03/24/02 (2)
  • Re: Price of new chrome electric mirrors - Troy Rudolph 23:06:50 03/24/02 (0)
  • $25.00- $50.00ea. for used is good (nt) - Mark Phillips 20:59:18 03/24/02 (0)
• Used fog lights-anyone need a pair? - Doug S. 08:11:12 03/24/02 (1)
  • Fog lamps are gone to a first fiver!!! - Doug S. 10:22:38 03/25/02 (0)
• Getrag 262cr on Ebay - Jim Hineline 02:15:35 03/24/02 (0)
• regular vs unleaded again.. - tom 00:24:10 03/24/02 (16)
  • Re: regular vs unleaded again.. - bruce 15:35:46 03/25/02 (0)
  • Just found out I can get 94 octane - e24 Refugee 01:43:12 03/25/02 (0)
  • Re: regular vs unleaded again.. - Robert Bondi 03:55:06 03/24/02 (13)
    • Re: regular vs unleaded again.. - e24 refugee 04:22:05 03/24/02 (12)
      • Hey James , , , my Euro has a tag on the gas , , - Jefflee 11:50:22 03/24/02 (2)
        • It's the O2 sensor and/or converter - Robert Bondi 00:41:32 03/25/02 (1)
          • You will be when I let you drive my car !! (nt) - Jefflee 11:45:38 03/25/02 (0)
      • Re: regular vs unleaded again.. - Marc 07:04:02 03/24/02 (8)
        • Re: regular vs unleaded again.. - Matt B 01:19:35 03/26/02 (1)
          • Agreed !! - Mark 04:51:38 03/26/02 (0)
        • Re: regular vs unleaded again.. - mikey 08:23:29 03/24/02 (5)
          • substitute really isn't lead - Robert Bondi 11:51:39 03/24/02 (3)
            • Re: substitute really isn't lead - mikey 19:08:21 03/24/02 (2)
              • Re: substitute really isn't lead - e24 Refugee 01:36:18 03/25/02 (1)
                • Re: substitute really isn't lead - mikey 19:04:28 03/25/02 (0)
          • Re: regular vs unleaded again.. - Marc 10:26:04 03/24/02 (0)
• 225 miles and still have 30 liters of gas. O Boy!! - Jefflee 00:19:04 03/24/02 (0)
• ATL meet, Total Embarassment...Mine! - Scott 23:51:15 03/23/02 (4)
  • Ok,She is fixed , who wants a ride??? - Scott 10:53:45 03/24/02 (0)
  • witnessed Macguyver at work! - Robert Bondi 04:25:37 03/24/02 (0)
  • 1st gear was 'incredible'. This BMW no longer , , - Jefflee 00:08:55 03/24/02 (1)
    • That's the fun... - Karl 21:31:06 03/24/02 (0)
• Analyze this !!! Part 3 - Peter Claassen 22:59:26 03/23/02 (3)
  • Re: Analyze this !!! Part 3 - Karl 21:43:26 03/24/02 (0)
  • injector sound - greghill 21:05:06 03/24/02 (0)
  • Re: Analyze this !!! Part 3 - Peter Florance 12:01:32 03/24/02 (0)
• lsd - JamesB 22:29:31 03/23/02 (3)
  • Re: lsd - Karl 21:55:09 03/24/02 (0)
  • Jack up the car with both rear wheels off the - Jefflee 23:46:58 03/23/02 (1)
    • one wheel off the ground variant - James 06:17:47 03/24/02 (0)
• Since the outside is the only real difference..... - e24 refugee 21:28:42 03/23/02 (3)
  • Re: Since the outside is the only real difference..... - Karl 22:21:50 03/23/02 (1)
    • Re: Since the outside is the only real difference..... - e24 refugee 04:10:48 03/24/02 (0)
  • Re: Since the outside is the only real difference..... - Peter Florance 22:20:17 03/23/02 (0)
• For stock radiator believers (esp. Lars) - Robert Bondi 16:28:59 03/23/02 (14)
  • What to do??? - Jurgen Fivesman 15:07:09 03/25/02 (1)
    • 1/2 on T gauge nothing to sweat - Robert Bondi 02:26:14 03/26/02 (0)
  • Re: For stock radiator believers (esp. Lars) - Karl 22:06:03 03/23/02 (1)
    • Re: For stock radiator believers (esp. Lars) - Marc 10:32:55 03/24/02 (0)
  • Touche' .... Your point. OOOPS! - Lars BendOr e12z 19:05:07 03/23/02 (1)
    • BTW For all the immigrants dying to move here>>> - Lars BendOr e12z 19:07:46 03/23/02 (0)
  • Re: For stock radiator believers (esp. Lars) - Troy Rudolph 17:56:01 03/23/02 (5)
    • Excellent...somebody agrees! - Robert Bondi 18:32:05 03/23/02 (4)
      • Re: Excellent...somebody agrees! - T.Han 01:17:42 03/24/02 (3)
        • Re: Excellent...somebody agrees! - Troy Rudolph 13:50:53 03/24/02 (0)
        • Re: Excellent...somebody agrees! - Robert Bondi 04:32:27 03/24/02 (1)
          • i confess! - mikey 08:48:01 03/24/02 (0)
  • RED , , of all things !!! Boy-oh Boy !!! (nt) - Jefflee 16:45:30 03/23/02 (1)
    • This reminds me of .... - Marc 21:09:43 03/23/02 (0)
• Floor mat poll - Peter Florance 14:54:05 03/23/02 (9)
  • Mats on Ebay - Jim Hineline 02:43:03 03/24/02 (0)
  • Re: Floor mat poll - Mark Phillips 23:06:55 03/23/02 (6)
    • blue - Peter Florance 07:27:07 03/24/02 (5)
      • BavAuto has some nice mats , , , but they - Jefflee 11:35:00 03/24/02 (4)
        • Bought a set last week - Steve C. 19:14:46 03/24/02 (0)
        • oh... - Peter FlorE12nce 11:53:19 03/24/02 (2)
          • Another friend just got mats,, fit perfectly (nt - Jefflee 12:28:01 03/25/02 (0)
          • Thanks Steve. (nt) - Jefflee 20:21:06 03/24/02 (0)
  • Re: Floor mat poll - T.Han 15:05:12 03/23/02 (0)
• Need help with ignition failure. - TCD 14:16:22 03/23/02 (1)
  • Re: Need help with ignition failure. - Peter Florance 20:17:52 03/23/02 (0)
• does lowering car effect headlight aiming?? - Ryan Bryan 12:33:44 03/23/02 (4)
  • Re: does lowering car effect headlight aiming?? - Beamher Bob 09:21:51 03/25/02 (0)
  • Re: does lowering car effect headlight aiming?? - Karl 22:12:12 03/23/02 (1)
    • And a little less up the road! You could raise - Jefflee 00:15:12 03/24/02 (0)
  • Makes sense , , , , ,doesn't it ???? (nt) - Jefflee 14:38:07 03/23/02 (0)
• Suggestions? - stewart 01:26:20 03/23/02 (4)
  • intake valve deposits - Peter Florance 11:10:35 03/23/02 (0)
  • Before you spend a lot of time on tuning..... - Lars BendOr e12z 09:21:27 03/23/02 (1)
    • valve seals - Peter Florance 11:08:50 03/23/02 (0)
  • Re: Suggestions? - T.Han 03:00:07 03/23/02 (0)
• 16'' alpina wheels on e-bay - al 00:05:52 03/23/02 (0)
• body kit - Matt 22:35:01 03/22/02 (0)
• Paging Don Daynes - BIGERIK 20:33:28 03/22/02 (1)
  • This is Don's accomplice... - Eric Q 21:42:28 03/22/02 (0)
• lsd - JamesB 19:58:11 03/22/02 (1)
  • Re: lsd - Karl 23:54:07 03/22/02 (0)
• Allignment question ...anyone? - John in NH 17:32:33 03/22/02 (7)
  • Re: Allignment question ...anyone? - Karl 23:58:16 03/22/02 (0)
  • Re: Allignment question ...anyone? - Peter Florance 22:44:26 03/22/02 (0)
  • Did they preload the car w/weight as prescribed? - Lars BendOr e12z 20:19:25 03/22/02 (4)
    • Re: I dunno..what's the prescribed wieght to add? - John in NH 09:45:46 03/23/02 (3)
      • Re: One more question in regards - John in NH 11:40:48 03/23/02 (2)
        • yes 150 lbs each seat... don't know what you mean - Lars BendOr e12z 19:11:49 03/23/02 (0)
        • FULL tank of gas, driver in seat and , , , - Jefflee 14:36:38 03/23/02 (0)
• 320i intake runners - Jake Hall 17:32:31 03/22/02 (3)
  • Re: 320i intake runners - Erich M 13:24:18 03/24/02 (0)
  • Re: 320i intake runners - Peter Florance 22:41:38 03/22/02 (0)
  • Re: 320i intake runners - Bill Barrett 19:02:24 03/22/02 (0)
• 320i intake runners - Jake Hall 17:29:24 03/22/02 (0)
• 1976 530i - Bruce Farrar 12:09:14 03/22/02 (7)
  • Re: 1976 530i - Mishast 12:14:25 03/25/02 (0)
  • Re: 1976 530i - Randy Clark 14:56:20 03/23/02 (0)
  • If you're a Webber Guy and you really know>>> - Lars BendOr e12z 20:27:55 03/22/02 (0)
  • Check all rubber. Bushings, Subframe mounts, - Dean 17:24:00 03/22/02 (2)
    • should be ok on 530 (more) - Peter Florance 17:27:11 03/22/02 (1)
      • Oh - Dean 19:05:02 03/22/02 (0)
  • Re: 1976 530i - Marc 12:27:58 03/22/02 (0)
• Shift Tower Mounts - Derek 11:16:07 03/22/02 (4)
  • Re: Shift Tower Mounts - Mark 18:18:42 03/22/02 (1)
    • agreed - Peter Florance 22:33:20 03/22/02 (0)
  • 5 speed answer - Peter Florance 17:23:19 03/22/02 (0)
  • Re: Shift Tower Mounts - Derek 17:11:53 03/22/02 (0)
• Analyze this ! Part 2 ...... - Peter Claassen 11:01:09 03/22/02 (4)
  • Re: Analyze this ! Part 2 ...... - Randy Clark 15:03:04 03/23/02 (0)
  • Re: Analyze this ! Part 2 ...... - Troy Rudolph 12:51:33 03/22/02 (0)
  • My guess..injectors.....nt - Scott 11:12:39 03/22/02 (1)
    • Re: My guess..injectors.....nt - Marc 12:17:40 03/22/02 (0)
• Ignition Problem? - Randy Clark 21:55:13 03/21/02 (2)
  • Re: Ignition Problem? - Peter Florance 06:36:49 03/22/02 (1)
    • Re: Ignition Problem? - Scott 10:46:53 03/22/02 (0)
• Brake Pedal Height - Randy Clark 21:50:30 03/21/02 (3)
  • When this happened to me, I bled the brakes again - Jefflee 10:07:38 03/22/02 (0)
  • Re: Brake Pedal Height - Peter Florance 06:48:28 03/22/02 (0)
  • how much brake fluid do you have ? - Kevin Kew 05:46:39 03/22/02 (0)
• Driven 140 miles, , ,still checkin' m/gal (nt) - Jefflee 21:45:16 03/21/02 (0)
• universal O2 sensors - mikey 20:16:19 03/21/02 (3)
  • Re: universal O2 sensors - Karl 00:06:39 03/23/02 (0)
  • I got same sensor as Peter... - Robert Bondi 22:02:34 03/21/02 (0)
  • no but... - Peter Florance 20:26:00 03/21/02 (0)
• Oh Man! Your gonna luv this! a little OT - Scott 19:20:51 03/21/02 (5)
  • that was absolutely sweet! - Adam Wilson 09:38:07 03/22/02 (0)
  • Re: Oh Man! Your gonna luv this! a little OT - Don Daynes 23:27:26 03/21/02 (0)
  • Time to take her to the track!!! - TCD 19:42:41 03/21/02 (0)
  • oh yeah, the bike rack stayed on the whole time - Scott 19:28:55 03/21/02 (1)
    • LOL. the story is humorous, the bike rack comment. - Kevin Kew 20:34:08 03/21/02 (0)
• Adj Fuel Press Reg Survey - Robert Bondi 18:48:32 03/21/02 (13)
  • Fuel pressure regulator installation.... - Bill Barrett 20:38:23 03/22/02 (0)
  • Re: Adj Fuel Press Reg Survey - Peter Florance 19:44:25 03/21/02 (6)
    • Re: Adj Fuel Press Reg Survey - Robert Bondi 21:59:35 03/21/02 (5)
      • Going to add something to this Robert. Hope you , - Jefflee 22:21:05 03/21/02 (4)
        • Elaboration on that detail... - Robert Bondi 22:37:14 03/21/02 (3)
          • I would - Peter Florance 05:44:51 03/22/02 (2)
            • connect vac retard? - Robert Bondi 11:23:49 03/22/02 (1)
              • Re: connect vac retard? - Peter Florance 17:12:50 03/22/02 (0)
  • Re: Adj Fuel Press Reg Survey - Kaveman 19:23:31 03/21/02 (2)
    • Great info! - Read Jefflee - Robert Bondi 19:41:48 03/21/02 (1)
      • Re: Great info! - Read Jefflee - Kaveman 19:59:44 03/21/02 (0)
  • Re: Adj Fuel Press Reg Survey - Jim Ockner 19:14:19 03/21/02 (1)
    • Re: Adj Fuel Press Reg Survey - Robert Bondi 19:35:56 03/21/02 (0)
• continuing saga with headlights... - Steve C. 18:39:32 03/21/02 (0)
• How do you remove the Electric cooing fan? - Funfer 16:18:30 03/21/02 (6)
  • Oh man you opened a can o'worms now.... - Scott 16:25:34 03/21/02 (5)
    • Re: Oh man you opened a can o'worms now.... - funfer 18:14:43 03/21/02 (2)
      • alternative access to aux fan - Robert Bondi 18:32:06 03/21/02 (1)
        • LOL thats funny!! Rob knew what I was talkn about - Scott 19:06:56 03/21/02 (0)
    • Re: Oh man you opened a can o'worms now.... - Peter Florance 17:39:41 03/21/02 (0)
    • Re: Oh man you opened a can o'worms now.... - Tony Rod 17:30:26 03/21/02 (0)
• Lambda conv successes: Exhaust comp - Robert Bondi 16:10:07 03/21/02 (5)
  • Comparison - Don Daynes 22:42:56 03/21/02 (3)
    • Wow, you kicked my butt... - Robert Bondi 23:28:34 03/21/02 (2)
      • Only for comparison - Don Daynes 23:35:24 03/21/02 (1)
        • Yeah, that's cool - Robert Bondi 23:52:23 03/21/02 (0)
  • Cool.....nt - Scott 16:26:54 03/21/02 (0)
• Peter Florence - Jim Ockner 13:55:19 03/21/02 (2)
  • Excellent FAQ - Peter Florance 19:58:27 03/21/02 (1)
    • Re: Excellent FAQ - Peter Florance 20:03:16 03/21/02 (0)
• 528i sunroof (clogged drains?) - steve occhi 12:59:51 03/21/02 (6)
  • Re: 528i sunroof (clogged drains?) - Sam Schultz 19:00:32 03/21/02 (1)
    • Re: 528i sunroof (clogged drains?) - steve occhi 11:35:25 03/22/02 (0)
  • Happen(ed/s) to me occasionaly. - Kevin Kew 14:35:22 03/21/02 (3)
    • Re: Happen(ed/s) to me occasionaly. - steve occhi 11:31:35 03/22/02 (0)
    • Re: Happen(ed/s) to me occasionaly. - steve occhi 11:30:24 03/22/02 (0)
    • Re: Happen(ed/s) to me occasionaly. - steve occhi 11:29:05 03/22/02 (0)
• rear brake caliper and disc compatibility - Adam Wilson 10:25:52 03/21/02 (6)
  • Re: rear brake caliper and disc compatibility - Troy Rudolph 16:00:15 03/21/02 (0)
  • They appear to be completely different - Peter Claassen 14:14:41 03/21/02 (0)
  • Re: rear brake caliper and disc compatibility - derek 12:00:26 03/21/02 (2)
    • as I said.... - Adam Wilson 12:08:29 03/21/02 (1)
      • swept area? (longish) - Peter Florance 17:36:41 03/21/02 (0)
  • Re: rear brake caliper and disc compatibility - Peter Florance 11:43:10 03/21/02 (0)
• Springs on eBay - Kaveman 10:07:11 03/21/02 (5)
  • Hey Sean. My car has , , , - Jefflee 15:21:51 03/21/02 (0)
  • The 6 coupe is much heavier than the e12 - lars BendOr e12z 13:02:11 03/21/02 (1)
    • I thought the springs and struts were shorter? no? - Scott 13:24:52 03/21/02 (0)
  • Re: Springs on eBay - Mishast 12:07:18 03/21/02 (1)
    • If Im not mistaken they will lower the car.. - Scott 12:22:10 03/21/02 (0)
• Analyze This ! (please) - Peter Claassen 23:08:28 03/20/02 (5)
  • Re: Analyze This ! (please) - Mishast 12:09:50 03/21/02 (1)
    • Re: Analyze This ! (please) - Derek 14:06:31 03/21/02 (0)
  • Re: Analyze This ! (please) - Peter Florance 06:38:35 03/21/02 (0)
  • Re: Analyze This ! (please) - Kaveman 00:12:06 03/21/02 (1)
    • Re: Analyze This ! (please) - Mark 00:39:14 03/21/02 (0)
• Springs - Tony Rod 22:35:13 03/20/02 (4)
  • Korman sells springs, really made by ST - Adam Wilson 09:49:11 03/21/02 (0)
  • Re: Springs - Karl 22:49:23 03/20/02 (2)
    • Re: Springs - Mishast 12:17:29 03/21/02 (0)
    • That may or may not be a good Idea.... - Scott 09:31:43 03/21/02 (0)
• front air dam - matt 21:42:44 03/20/02 (1)
  • Re: front air dam - Troy Rudolph 23:01:40 03/20/02 (0)
• Yet Another 011 AFm For Sale.... - Kaveman 20:32:31 03/20/02 (0)
• Bluebook Factory manual FS on ebay - stewart 19:12:46 03/20/02 (0)
• The cam just got back from the shop. - Bill Barrett 18:52:20 03/20/02 (2)
  • Re: The cam just got back from the shop. - Peter Florance 18:55:24 03/20/02 (1)
    • Re: The cam just got back from the shop. - Steve Kirby 21:35:29 03/20/02 (0)
• Is anybody bidding on the VA EBAY 528i? - TCD 18:48:15 03/20/02 (8)
  • Outbid with 4 seconds left!!! - TCD 05:25:34 03/21/02 (5)
    • that blows! - Adam Wilson 09:50:43 03/21/02 (4)
      • Re: that blows! - TCD 10:38:05 03/21/02 (3)
        • The Georgia E28 didn't pan out ???? (nt) - Jefflee 14:47:50 03/21/02 (2)
          • Heck !! I could'a takin' 'em days ago and , , , - Jefflee 21:40:10 03/21/02 (0)
          • Waiting on pictures. - TCD 16:20:54 03/21/02 (0)
  • I won't as long as you agree to part it out - Lars BendOr e12z 22:02:55 03/20/02 (0)
  • LOL! you need help! nt - Scott 20:26:34 03/20/02 (0)
• 75$ set of 14in.Mahle BBS in Houston. - TexasTim 18:48:04 03/20/02 (2)
  • Re: 75$ set of 14in.Mahle BBS in Houston. - Jim Hartwell 02:09:44 03/21/02 (0)
  • 14x7 or 14x6.5 - TCD 18:49:09 03/20/02 (0)
• neighbors finally got ticked off at me - ...tom 17:17:43 03/20/02 (12)
  • one done, one to go - ...tom 15:18:35 03/21/02 (1)
    • Let your neighbor live with that . . . . . . .(nt) - Jefflee 21:42:22 03/21/02 (0)
  • urban solution - _______ 11:43:48 03/21/02 (0)
  • Re: neighbors finally got ticked off at me - Adam Wilson 09:56:46 03/21/02 (1)
    • Re: neighbors finally got ticked off at me - T.Han 01:28:56 03/22/02 (0)
  • Re: neighbors finally got ticked off at me - Jeff C 07:10:17 03/21/02 (2)
    • hey move to the Land of Oz (bit of a ramble) - Matt B 08:52:06 03/21/02 (1)
      • Maybe I'm getting older... - Jeff C 10:30:02 03/21/02 (0)
  • Re: neighbors finally got ticked off at me - T.Han 22:53:28 03/20/02 (0)
  • happened to us once too - Robert Bondi 18:27:36 03/20/02 (1)
    • It's getting there isnt it?nt - Scott 20:28:40 03/20/02 (0)
  • YEP !! That's what I did. Road not even on Maps - Jefflee 17:21:54 03/20/02 (0)
• EFI Conversion FAQ - Jim Ockner 17:11:06 03/20/02 (3)
  • Very Impressive Jim, U did a great Job (nt) - Scott 13:45:56 03/21/02 (0)
  • This FAQ looks very nice! - Robert Bondi 23:44:11 03/20/02 (0)
  • may we link to it? - Peter Florance 18:53:09 03/20/02 (0)
• Found at Salvage - 5keta 16:16:26 03/20/02 (3)
  • Re: Found at Salvage - T. Han 22:56:54 03/20/02 (0)
  • Hey,,,Are Those Chrome Mirrors Adam ?? (nt) - Jefflee 17:18:31 03/20/02 (1)
    • nope, body color (NT) - Adam Wilson 10:18:29 03/21/02 (0)
• Paging Jeff C. - Steve C. 15:48:35 03/20/02 (2)
  • Re: Paging Jeff C. - Derek 15:56:28 03/20/02 (1)
    • Sorry Steve -- I've been tied up at work... - Jeff C 07:22:06 03/21/02 (0)
• Pulling my hair out.... - Steve C. 15:44:56 03/20/02 (1)
  • Re: Fog Lights - Karl 16:37:21 03/20/02 (0)
• BIGGERICK (sp?)-re: Windsor Pick 'n' Pull..... - Catfish 14:00:24 03/20/02 (2)
  • Re: BIGGERICK (sp?)-re: Windsor Pick 'n' Pull..... - BIGERIK 19:32:53 03/20/02 (1)
    • Re: BIGGERICK (sp?)-re: Windsor Pick 'n' Pull..... - Catfish 22:32:26 03/20/02 (0)
• Looking for a 5speed trans. - Catfish 13:32:11 03/20/02 (4)
  • Re: Looking for a 5speed trans. - Troy Rudolph 14:48:36 03/20/02 (3)
    • will trans from 82 528e fit? - mikey 19:36:21 03/20/02 (2)
      • Actually 82 528e will fit - David G 19:11:37 03/21/02 (0)
      • Re: will trans from 82 528e fit? - Catfish 22:34:19 03/20/02 (0)
• front signal light cover - mike 10:35:50 03/20/02 (1)
  • Re: front signal light cover - Sam R. 15:12:01 03/20/02 (0)
• How much is my '81 528ia worth? - JohnN 10:17:58 03/20/02 (8)
  • John, I'm in the Chicago 'burbs - Adam Wilson 11:33:37 03/20/02 (3)
    • Re: John, I'm in the Chicago 'burbs - JohnN 09:45:50 03/21/02 (2)
      • Re: John, I'm in the Chicago 'burbs - Adam Wilson 10:00:19 03/21/02 (1)
        • Re: John, I'm in the Chicago 'burbs - JohnN 10:28:51 03/21/02 (0)
  • Some pics and what I paid - Lars BendOr e12z 11:11:12 03/20/02 (3)
    • Forgot the link to pics - Lars 11:13:08 03/20/02 (2)
      • Re: Forgot the link to pics - JohnN 09:47:54 03/21/02 (1)
        • Re: Forgot the link to pics - JohnN 09:49:23 03/21/02 (0)
• New supplier added to links - Walloth und Nesch G - Peter Florance 09:39:16 03/20/02 (0)
• Found what appears to be a 4-barrel Carb on my , , - Jefflee 09:17:55 03/20/02 (2)
  • Re: Found what appears to be a 4-barrel Carb on my , , - Matt B 06:43:05 03/21/02 (0)
  • Re: Found what appears to be a 4-barrel Carb on my , , - Sam Schultz 13:16:42 03/20/02 (0)
• New 5 series book with e12 content - Marc 07:35:44 03/20/02 (20)
  • Here it is on Amazon - Jim Ockner 17:04:24 03/20/02 (1)
    • Re: Here it is on Amazon - Marc 21:25:25 03/20/02 (0)
  • kickass, its finally here! - Adam Wilson 11:07:54 03/20/02 (4)
    • Re: kickass, its finally here! - Marc 12:55:31 03/20/02 (3)
      • What about the pic I sent you ? (nt) - Kevin Kew 16:48:53 03/20/02 (2)
        • Re: What about the pic I sent you ? (nt) - Marc 21:23:10 03/20/02 (1)
          • Actually he totaled that piece. - Kevin Kew 14:43:45 03/21/02 (0)
  • Marc,,,Who is publishing this book?? and , , , - Jefflee 09:09:47 03/20/02 (7)
    • Veloce - Peter Florance 09:57:36 03/20/02 (6)
      • Alfa Romeo Veloce, One of My All-Time , , , - Jefflee 11:06:05 03/20/02 (5)
        • Bianchi " Veloce" one of my Favorite Bicycles.. - Scott 12:24:23 03/20/02 (4)
          • viva Italia!! - Peter Florance 13:42:47 03/20/02 (1)
            • I have 1989 full super record Eddie Merckx Corsa - Scott 14:01:30 03/20/02 (0)
          • I knew a girt named Celeste once !! (nt) - Jefflee 13:16:25 03/20/02 (1)
            • Not girt , , , but girl (nt) - Jefflee 13:20:17 03/20/02 (0)
  • NICE! Are you the author??? nt - Scott 09:07:15 03/20/02 (4)
    • Re: NICE! Are you the author??? nt - Marc 09:56:45 03/20/02 (3)
      • darn colonies... - Peter Florance 09:59:00 03/20/02 (2)
        • Re: darn colonies... - Marc 10:09:37 03/20/02 (1)
          • LOL! you speak the truth... nt - Scott 10:22:48 03/20/02 (0)
• Engine transfer - Matt B 07:20:21 03/20/02 (5)
  • Re: Engine transfer - mikey 20:09:52 03/20/02 (0)
  • Re: Engine transfer - Troy Rudolph 12:45:38 03/20/02 (0)
  • Re: Engine transfer - Kaveman 09:23:17 03/20/02 (2)
    • Re: Engine transfer time required - Peter Claassen 10:22:31 03/20/02 (1)
      • Re: Engine transfer time required - Matt B 06:34:51 03/21/02 (0)
• engine/injector treatment - Dennis 23:17:07 03/19/02 (7)
  • Re: engine/injector treatment - Scott J 21:29:38 03/20/02 (0)
  • Re: engine/injector treatment - Troy Rudolph 08:30:18 03/20/02 (5)
    • I'm going to ruffle some feathers here.. - Peter Florance 10:07:59 03/20/02 (3)
      • RUFFLE AWAY !! Guys I know use Water , , , - Jefflee 11:13:15 03/20/02 (2)
        • ?!??!?!?!? please explain this JC - Scott 12:26:24 03/20/02 (1)
          • Just pour it in a vacuum line on the manifold (nt - Jefflee 17:06:41 03/20/02 (0)
    • redline SL1 works good too. nt - mikey 08:48:40 03/20/02 (0)
• euro-tization, euro-anizing, euro-anating, ??? - ...tom 18:39:48 03/19/02 (7)
  • Re: euro-tization, euro-anizing, euro-anating, ??? - Alan Abreu 12:22:57 03/20/02 (4)
    • Re: euro-tization, euro-anizing, euro-anating, ??? - Eddie Ribeiro 20:43:55 03/20/02 (0)
    • euro bumper conversion - ...tom 16:18:02 03/20/02 (2)
      • any other differences in fenders besides signals? - benji 11:49:06 03/22/02 (1)
        • Re: any other differences in fenders besides signals? - Eddie Ribeiro 14:02:22 03/22/02 (0)
  • sounds very cool, was considering the same - Adam Wilson 11:16:46 03/20/02 (1)
    • they're going ups so shipping should be ok... - ...tom 16:20:02 03/20/02 (0)
• Any good salvage yards E. Florida Coast??? - Aaron Wyatt 18:28:57 03/19/02 (0)
• Crap! Door lock issues - Greg 14:42:09 03/19/02 (10)
  • Old Dog..Old Trick. Never met an e12>> - Lars BendOr e12z 17:11:17 03/19/02 (0)
  • Re: Crap! Door lock issues - Chuck Denson 16:11:40 03/19/02 (2)
    • Re: Crap! Door lock issues - Greg 16:38:05 03/19/02 (1)
      • Re: Crap! Door lock issues - Chuck Denson 17:39:01 03/19/02 (0)
  • Re: Crap! Door lock issues - Jim Davis 16:06:53 03/19/02 (3)
    • Paging Karl Koenig, door spring thingy - Greg 16:41:20 03/19/02 (2)
      • Re: Paging Karl Koenig, door spring thingy - Karl 23:11:17 03/20/02 (1)
        • Usually, the end of the spring (the hook) breaks , - Jefflee 08:35:14 03/21/02 (0)
  • I have an idea that Peter used on my car.... - Jeff C 15:24:09 03/19/02 (1)
    • Works great! - Peter Florance 06:21:35 03/20/02 (0)
• 77' e12 Sale for$500 - Kevin Um 14:19:55 03/19/02 (0)
• Smeg removal, paging Sean, Kaveman - Adam Wilson 14:14:12 03/19/02 (4)
  • related question - Peter Florance 21:12:07 03/19/02 (1)
    • Re: related question - Kaveman 21:20:49 03/19/02 (0)
  • Re: Smeg removal, paging Sean, Kaveman - Kaveman 17:47:07 03/19/02 (0)
  • Try Simple Green - Robert Bondi 16:26:02 03/19/02 (0)
• cleaning up slop in the suspension, the road ahead - Adam Wilson 13:24:03 03/19/02 (2)
  • Yeah, Success!!! - TCD 17:40:46 03/19/02 (0)
  • Re: cleaning up slop in the suspension, the road ahead - Ryan Bryan 13:51:43 03/19/02 (0)
• I'm doing a Miles/gal. check on my 3.5L-jet , , , - Jefflee 13:01:00 03/19/02 (2)
  • Miles/gal. check - Peter Claassen 17:40:57 03/19/02 (1)
    • Very thirsty - Mark 06:37:38 03/20/02 (0)
• Recommended Power Steering Fluid - Mishast 12:04:32 03/19/02 (4)
  • Re: Recommended Power Steering Fluid - derek 12:29:46 03/19/02 (0)
  • Re: Recommended Power Steering Fluid - Peter Florance 12:21:42 03/19/02 (2)
    • Re: Recommended Power Steering Fluid - Mishast 13:08:43 03/19/02 (1)
      • Bottom of reservoir . . . (nt) - Jefflee 13:19:25 03/19/02 (0)
• rambling about wheels and tires - Ryan Bryan 11:32:11 03/19/02 (3)
  • sounds great, some comments... - Adam Wilson 13:17:31 03/19/02 (1)
    • Re: sounds great, some comments... - Ryan Bryan 13:47:14 03/19/02 (0)
  • Re: rambling about wheels and tires - Peter Florance 12:20:51 03/19/02 (0)
• Car of the Month / Members' Gallery - Troy Rudolph (Webmaster) 08:44:40 03/19/02 (11)
  • You've only just missed... - Dave Spencer 04:39:12 03/20/02 (0)
  • Re: Car of the Month / Members' Gallery - BIGERIK 20:07:07 03/19/02 (2)
    • Re: Car of the Month / Members' Gallery - Troy Rudolph (Webmaster) 21:15:48 03/19/02 (1)
      • ALL IS WELL , IN FIRST FIVE WEB SPACE!!!!!! (NT) - BIGERIK 21:25:12 03/19/02 (0)
  • Re: Car of the Month / Members' Gallery - Mark 10:30:15 03/19/02 (6)
    • agreed... - Scott 10:38:54 03/19/02 (5)
      • Re: agreed... - Mark 11:00:52 03/19/02 (4)
        • speaking of traffic light races... - Kevin Kew 19:36:05 03/19/02 (3)
          • Re: speaking of traffic light races... - Mark 22:07:31 03/19/02 (2)
            • Re: speaking of traffic light races... - Matt B 07:11:15 03/20/02 (1)
              • Re: speaking of traffic light races... - Marc 07:42:06 03/20/02 (0)
• How much did you pay for your E12? - Remy Davison 08:24:10 03/19/02 (12)
  • Re: How much did you pay for your E12? - Randy McCafferty 22:53:57 03/19/02 (2)
    • Randy, it's worth every penny. nt - Scott 20:32:43 03/20/02 (1)
      • Re: Randy, it's worth every penny. nt - Randy 13:22:02 03/21/02 (0)
  • Re: How much did you pay for your E12? - Sam Schultz 19:42:16 03/19/02 (0)
  • $3000.00 - Ryan Bryan 14:44:22 03/19/02 (0)
  • Mine cost 1500, had about 1100 work done on it(nt) - Kevin Kew 14:37:21 03/19/02 (2)
    • LOL that gets me everytime!!........."nt" - Scott 15:03:41 03/19/02 (1)
      • Agreed. That NT! stuff is Hoo-larious..ROTF - JB 20:23:50 03/20/02 (0)
  • All in All, 2K, invested way more in mods....: ) - Scott 08:35:44 03/19/02 (3)
    • Saw a car just like your 83 - Mark 10:27:52 03/19/02 (2)
      • Re: Saw a car just like your 83 - Remy Davison 20:52:12 03/19/02 (1)
        • Re: Saw a car just like your 83 - Mark 22:09:52 03/19/02 (0)
• Paging Dean with the T-Stat...DEAN!! - Scott 08:17:38 03/19/02 (5)
  • Scott: YEP, looks to be a 77 T. Stat Housing. - Dean 11:10:18 03/20/02 (0)
  • The Fed-Ex didn't leave it, MB today. - Dean 12:22:39 03/19/02 (3)
    • I overnighted it... - Scott 12:48:08 03/19/02 (0)
    • I overnighted it... - Scott 12:47:14 03/19/02 (1)
      • sorry 4 double post....... - Scott 12:48:58 03/19/02 (0)
• Paging (Troy R.) Webmaster - BIGERIK 00:35:38 03/19/02 (0)
• How to measure exhaust pipes? - Catfish 20:56:48 03/18/02 (1)
  • Should be inside diameter if I am not mistaken nt. - Steve C. 06:33:27 03/19/02 (0)
• reactor detractor... - tom 20:12:01 03/18/02 (3)
  • Re: reactor detractor... - Bill Barrett 18:45:52 03/20/02 (0)
  • Re: reactor detractor... - Troy Rudolph 12:42:21 03/19/02 (0)
  • Re: reactor detractor... - Catfish 20:54:27 03/18/02 (0)
• Don D... what are you doin' in the middle of.... - Kaveman 17:48:24 03/18/02 (2)
  • Re: Don D... what are you doin' in the middle of.... - Don Daynes 18:39:26 03/18/02 (1)
    • SD e28 meet pics - Don Daynes 18:44:03 03/18/02 (0)
• Front Stress Bar - Jake Hall 17:16:50 03/18/02 (0)
• I saw engines for sale in the Roundle - Ryan Bryan 16:18:15 03/18/02 (6)
  • Al Taylor's website! CHECK IT OUT! - Jeff Olson 09:39:30 03/19/02 (0)
  • Al Taylor is not bimmer world, see more - Sam Schultz 18:47:03 03/18/02 (2)
    • ooops....sorry Al and James...I got mixed up - Ryan Bryan 18:58:10 03/18/02 (1)
      • its easly confused both are good shops - Sam Schultz 07:45:23 03/19/02 (0)
  • Al's Engines - Chuck Denson 16:29:25 03/18/02 (1)
    • races an E3 - Peter Florance 17:15:27 03/18/02 (0)
• am i nuts to by a 78 530i - Tom Russell 15:59:14 03/18/02 (10)
  • Re: am i nuts to by a 78 530i - tom 07:41:47 03/21/02 (0)
  • Re: am i nuts to by a 78 530i - Ryan Bryan 16:14:28 03/18/02 (0)
  • YES! PASS!! Im on my way to NM!! - Scott 16:13:07 03/18/02 (7)
    • Re: YES! PASS!! Im on my way to NM!! - Tom Russell 16:27:08 03/18/02 (6)
      • Kick-A$$ - Chuck Denson 16:31:24 03/18/02 (5)
        • Why remove reactors ? - Mark 22:09:04 03/18/02 (4)
          • Because my 77 630 head bit it at 127K (more) - Lars BendOr 09:20:41 03/19/02 (0)
          • Because it got lucky... - Scott 08:20:19 03/19/02 (2)
            • Re: Because it got lucky... - Mark 10:35:11 03/19/02 (1)
              • Re: Because it got lucky... - tom 07:34:56 03/21/02 (0)
• Salt slush, shock towers... - T.Han 14:51:54 03/18/02 (0)
• FS: 1980 e12 - Chuck Denson 12:39:40 03/18/02 (0)
• PAGING Dave Spencer - How's England ?? - Jefflee 11:06:05 03/18/02 (1)
  • Dave's Fine , , , On to Paris on Thursday and - Jefflee 09:45:39 03/19/02 (0)
• euro 4 watt parking lights wired up finally - Adam Wilson 10:42:51 03/18/02 (7)
  • now you can.... - Peter Florance 11:15:56 03/18/02 (4)
    • Re: now you can.... - Adam Wilson 11:17:38 03/18/02 (3)
      • at least the Hella H4 lenses... - Peter Florance 11:18:41 03/18/02 (2)
        • Hey Peter... - Scott 11:59:58 03/18/02 (1)
          • Re: Hey Peter... - Peter Florance 12:39:30 03/18/02 (0)
  • INCREDIBLY Beautiful , , , - Jefflee 11:02:27 03/18/02 (0)
  • That looks so BAD A$$!!!! - Scott 10:50:41 03/18/02 (0)
• DOH! Stupid changing belts #@#$@!!! - Adam Wilson 10:35:59 03/18/02 (4)
  • Re: DOH! Stupid changing belts #@#$@!!! - Peter Florance 11:24:40 03/18/02 (0)
  • Wanna feel a little better ?? , , , - Jefflee 10:53:26 03/18/02 (1)
    • your instrument cluster - Adam Wilson 10:55:48 03/18/02 (0)
  • STBU man, sorry to hear that...I hate having - Scott 10:48:39 03/18/02 (0)
• Bummer , Rainy monday and car wont start - Scott J 09:43:00 03/18/02 (0)
• Bummer, Rainy Monday and car won't start - Scott J 08:27:22 03/18/02 (5)
  • ljetronic FAQ - Peter Florance 19:45:20 03/18/02 (0)
  • Re: Bummer, Rainy Monday and car won't start - Chuck Denson 08:51:27 03/18/02 (0)
  • The pump is activated when your AFM door - Scott 08:48:24 03/18/02 (2)
    • Thanks to Chuck and Scott - Scott J 20:25:31 03/18/02 (0)
    • HAH! beat ya to it Chuck!! by 3 minutes!! nt - Scott 10:20:53 03/18/02 (0)
• Hey Atlanta 5-ers! Does anyone know this car? - Jeff Olson 21:51:16 03/17/02 (1)
  • Car has been in Trader well over a month and , , , - Jefflee 22:45:03 03/17/02 (0)
• Wanted: Euro Bumpers - Matt Evans 21:30:41 03/17/02 (0)
• "To Do" list Follow up....be honest guys - Scott 20:58:27 03/17/02 (19)
  • Yes and a valve question - Peter Florance 09:39:07 03/18/02 (12)
    • Re: Yes and a valve question - Scott 10:25:48 03/18/02 (11)
      • Re: Yes and a valve question - Peter Florance 11:14:10 03/18/02 (10)
        • Ohhh..well then...thats different.. - Scott 13:04:49 03/18/02 (9)
          • lap? - Peter Florance 13:42:28 03/18/02 (8)
            • Re: lap? - Scott 13:46:40 03/18/02 (7)
              • Re: lap? - Peter Florance 14:11:57 03/18/02 (6)
                • Re: lap? - Scott 14:27:18 03/18/02 (5)
                  • didn't chill? - Peter Florance 14:32:10 03/18/02 (4)
                    • Dont know - Scott 14:41:02 03/18/02 (3)
                      • Re: Dont know - Peter Florance 15:10:22 03/18/02 (2)
                        • Never heard of it...I used Napa Brand... - Scott 15:40:41 03/18/02 (1)
                          • Re: Never heard of it...I used Napa Brand... - Peter Florance 16:21:40 03/18/02 (0)
  • Re: "To Do" list Follow up....be honest guys - Chuck Denson 23:30:55 03/17/02 (0)
  • Don't Turn My Hobby into A , , , , - Jefflee 22:35:39 03/17/02 (1)
    • plastic cluster cover! - Peter Florance 08:15:24 03/19/02 (0)
  • something seems funny... - Robert Bondi 21:52:00 03/17/02 (2)
    • I noticed that the spring on the Tstat is really - Scott 08:35:38 03/18/02 (1)
      • should have T spec stamped on it - Robert Bondi 09:55:28 03/18/02 (0)
• Cool thing happened - Troy Rudolph 13:44:28 03/17/02 (3)
  • Re: Cool thing happened - Chuck Denson 23:32:38 03/17/02 (0)
  • Re: you sure it was his thumb? j/k ..cool beans - John in NH 19:38:42 03/17/02 (0)
  • Neat! - Kevin Kew 18:45:20 03/17/02 (0)
• FS/Free: 1 good A/C compressor $50, 1 unknown - TCD 13:21:03 03/17/02 (0)
• 3.5l transplant - Dave Nichols 10:22:41 03/17/02 (0)
• race motor for sale - Dave Nichols 10:16:24 03/17/02 (1)
  • Re: race motor for sale - Adam Wilson 10:59:48 03/18/02 (0)
• Custom short shifter works great!! - Scott 08:22:57 03/17/02 (2)
  • Did you make the rear strut brace too? - TCD 09:44:27 03/17/02 (1)
    • Not yet, this coming weekend...................nt - Scott 21:00:05 03/17/02 (0)
• got propane to work and a nice tip - Robert Bondi 00:31:18 03/17/02 (3)
  • Thats cool!...are you leak free then?? - Scott 08:14:21 03/17/02 (2)
    • Re: Thats cool!...are you leak free then?? - Robert Bondi 12:51:48 03/17/02 (1)
      • Re: Thats cool!...are you leak free then?? - Peter Florance 19:47:38 03/17/02 (0)
• E-24 rear end - k ogden 23:27:32 03/16/02 (4)
  • Re: E-24 rear end - Blair 00:21:24 03/17/02 (3)
    • Re: E-24 rear end - k ogden 09:34:04 03/17/02 (2)
      • Re: E-24 rear end - Adam Wilson 17:34:50 03/18/02 (0)
      • 1st is below reverse (left and down) - ...tom 09:41:57 03/17/02 (0)
• fron't spoiler - Matthew 20:24:30 03/16/02 (1)
  • Re: fron't spoiler - BIGERIK 22:10:03 03/16/02 (0)
• "Paging Don Daynes, Paging Don Daynes" - matt 18:11:41 03/16/02 (0)
• Toolkit pieces missing - Tom Merlo 17:20:04 03/16/02 (4)
  • www.samstagsales.com - Lars BendOr e12z 22:20:57 03/17/02 (1)
    • Correct link - Lars 22:22:30 03/17/02 (0)
  • Re: Toolkit pieces missing - Peter Florance 21:12:27 03/16/02 (1)
    • Re: Toolkit pieces missing - Jim Hineline 23:24:59 03/16/02 (0)
• fan/blower interior - BIGERIK 17:20:00 03/16/02 (2)
  • Re: fan/blower interior - T.Han 22:46:39 03/17/02 (1)
    • How about a Rhino -Liner on the floors ??? (nt) - Jefflee 22:52:41 03/17/02 (0)
• Fog Lights question - BIGERIK 16:49:34 03/16/02 (2)
  • answers - Steve C. 11:15:16 03/17/02 (1)
    • THANKS A MILLION!!!!!! (NT) - BIGERIK 12:34:12 03/17/02 (0)
• Combustion chamber volume? - Bill Barrett 13:22:36 03/16/02 (1)
  • Re: Combustion chamber volume? - Bill Barrett 08:39:00 03/18/02 (0)
• Installed the cold air intake today - John in NH 12:06:33 03/16/02 (2)
  • Re: Chad Z. This post's for you - John in NH 15:03:46 03/16/02 (1)
    • Thanks John - Chad Z 19:03:17 03/16/02 (0)
• Mystery Sound - Lou 11:11:24 03/16/02 (7)
  • Me Too!!! - Mr. Coffey 20:10:20 03/16/02 (0)
  • Re: Mystery Sound - Troy Rudolph 14:28:41 03/16/02 (4)
    • That was it! - Lou 20:58:21 03/17/02 (3)
      • Quick question - Troy, Lou???? - Mr. Coffey 21:15:39 03/17/02 (2)
        • Re: Quick question - Troy, Lou???? - Troy Rudolph 22:08:58 03/17/02 (1)
          • Thanks! - Mr. Coffey 22:27:35 03/17/02 (0)
  • oops, 76 530i (nt) - Lou 11:32:08 03/16/02 (0)
• wheels for e 12 1978 , where can i find it? - al 23:40:29 03/15/02 (1)
  • Re: wheels for e 12 1978 , where can i find it? - Chuck Denson 01:35:06 03/16/02 (0)
• Checking Rear Sub-Frame Bushings and , , , , , , - Jefflee 20:46:07 03/15/02 (1)
  • I have the same sound - fred 20:41:11 03/17/02 (0)
• Ok lets see your "To Do" lists for this wknd... - Scott 18:20:20 03/15/02 (21)
  • gauges plus free air vent for gauges ala kaveman - Greg 20:17:45 03/16/02 (1)
    • Thanks For the offer... Update PIC of Guage Panel - Kaveman 20:51:45 03/16/02 (0)
  • e23 conversion to 5-speed - ...tom 06:20:09 03/16/02 (0)
  • quest for parts! - Chuck Denson 00:30:23 03/16/02 (0)
  • My weekend started today: - Don Daynes 22:59:10 03/15/02 (0)
  • My weekend started today and , , , - Jefflee 20:37:25 03/15/02 (1)
    • Lock/Window Motors added to List (nt) - Jefflee 22:03:31 03/16/02 (0)
  • Did I read this correctly? - Robert Bondi 19:59:13 03/15/02 (1)
    • It is a 528i radiator. - TCD 07:17:37 03/16/02 (0)
  • heads... - Peter Florance 19:54:06 03/15/02 (5)
    • Re: heads... - T.Han 23:08:42 03/15/02 (4)
      • my observations - Peter Florance 06:06:33 03/16/02 (0)
      • Re: heads... - Don Daynes 23:48:40 03/15/02 (2)
        • Re: heads... - T.Han 08:06:18 03/16/02 (1)
          • Re: heads... - Don Daynes 10:48:17 03/16/02 (0)
  • hydrogen conversion - greghill 19:20:10 03/15/02 (0)
  • MMMMM..... Beeer! - Kaveman 19:17:12 03/15/02 (0)
  • My list - Jeff C 19:15:44 03/15/02 (0)
  • Re: Ok lets see your "To Do" lists for this wknd... - Troy Rudolph 18:26:55 03/15/02 (2)
    • I cant remember the make...I think it was - Scott 20:22:17 03/15/02 (0)
    • I cant remember the make...I think it was - Scott 20:20:32 03/15/02 (0)
• sharp E12 on ebay, located in VA - Adam Wilson 16:36:46 03/15/02 (3)
  • Only about an hour and a half from me... - Steve Chandler 05:50:57 03/16/02 (0)
  • Re: sharp E12 on ebay, located in VA - T.Han 22:51:20 03/15/02 (0)
  • Re: sharp E12 on ebay, located in VA - Peter Florance 17:09:02 03/15/02 (0)
• Follow up to Timing (long) - CGW 14:11:39 03/15/02 (2)
  • Re: Follow up to Timing (long) - Peter Florance 17:12:42 03/15/02 (1)
    • Re: Follow up to Timing (long) - Mark 18:32:27 03/15/02 (0)
• Radiator: Recore or Buy New? - Chris 13:22:07 03/15/02 (8)
  • Recores $125 in Central Oregon - Lars BendOr e12z 21:23:37 03/15/02 (2)
    • Re: Recores $125 in Central Oregon - T.Han 22:44:30 03/15/02 (1)
      • Gee... don't have good answer - Lars BendOr e12z 10:39:14 03/16/02 (0)
  • Re: Radiator: Recore or Buy New? - Mark Phillips 13:39:18 03/15/02 (4)
    • Re: Radiator: Recore or Buy New? - T.Han 15:17:58 03/15/02 (3)
      • Re: Radiator: Recore or Buy New? - Scott 18:10:03 03/15/02 (2)
        • Had mine, soldered, acid dipped, pressure tested, - Jefflee 20:07:50 03/15/02 (1)
          • Above Post Price was $45 (forgot) , , , (nt) - Jefflee 10:18:53 03/16/02 (0)
• FS: Alpina Front Spoiler/air dam - Matt Evans 12:41:57 03/15/02 (1)
  • Re: FS: Alpina Front Spoiler/air dam - Darin 17:27:00 03/15/02 (0)
• Kaveman: Ernesto's was delectable! (way OT) - Dean 11:39:09 03/15/02 (0)
• Ported Manifold - Tony Rod 11:35:17 03/15/02 (1)
  • Re: Ported Manifold - Bill Barrett 07:58:52 03/16/02 (0)
• Seats - from other BMWS? - J.Valerius 10:48:50 03/15/02 (4)
  • Re: Seats - from other BMWS? - Jeremy T 13:01:28 03/15/02 (1)
    • Re: Seats - from other BMWS? - JamesB 19:50:20 03/15/02 (0)
  • Re: Seats - from other BMWS? - Kendell 12:12:41 03/15/02 (0)
  • I believe the seats and most of the interior of - Scott 11:46:19 03/15/02 (0)
• Found interesting UK site (parts & forum) , , , - Jefflee 09:51:25 03/15/02 (0)
• Is a thinner head gasket ill advised? - Bill Barrett 09:15:26 03/15/02 (2)
  • Oh, one more thing... - Scott 09:37:22 03/15/02 (0)
  • Yes, that will be a couple dgree retardation.... - Scott 09:27:24 03/15/02 (0)
• Guage Panel... VDO Senders.... - Kaveman 09:09:36 03/15/02 (8)
  • no problems with mine either - Adam Wilson 10:10:54 03/15/02 (4)
    • Re: no problems with mine either - Kaveman 16:59:10 03/15/02 (3)
      • Seems like normally open is what you want - Robert Bondi 20:09:41 03/15/02 (2)
        • Re: Seems like normally open is what you want - Kaveman 20:25:40 03/15/02 (1)
          • I see your point... - Robert Bondi 20:37:14 03/15/02 (0)
  • My press sender works fine - Robert Bondi 09:48:27 03/15/02 (2)
    • Re: My press sender works fine - Kaveman 10:04:14 03/15/02 (1)
      • Re: My press sender works fine - Robert Bondi 10:21:10 03/15/02 (0)
• Door windows again - Gene S 07:44:41 03/15/02 (1)
  • Re: Door windows again - Peter Florance 09:04:24 03/15/02 (0)
• State of Idle(reading for those interested) - Robert Bondi 22:47:04 03/14/02 (7)
  • More clues - Don Daynes 23:35:11 03/15/02 (0)
  • Re: State of Idle(reading for those interested) - Peter Florance 20:24:11 03/15/02 (1)
    • Have a big lead - Robert Bondi 22:07:46 03/15/02 (0)
  • Re: State of Idle(reading for those interested) - T.Han 00:02:59 03/15/02 (1)
    • don't have that AAV anymore - Robert Bondi 00:53:37 03/15/02 (0)
  • Re: State of Idle(reading for those interested) - T.Han 23:42:08 03/14/02 (1)
    • idle switch - Robert Bondi 01:00:40 03/15/02 (0)
• FOG LIGHTS - BIGERIK 22:22:44 03/14/02 (0)
• paging Peter Florance - Robert Bondi 22:06:46 03/14/02 (3)
  • Re: paging Peter Florance - Peter Florance 22:43:19 03/14/02 (2)
    • Re: paging Peter Florance - Robert Bondi 01:07:12 03/15/02 (1)
      • Re: paging Peter Florance - Peter Florance 06:55:48 03/15/02 (0)
• Koni Shocks - Tony Rod 19:47:17 03/14/02 (1)
  • Re: Koni Shocks - Greg 19:56:28 03/14/02 (0)
• fabricators heaven - Greg 18:33:18 03/14/02 (11)
  • Re: fabricators heaven - Frank H 22:18:19 03/14/02 (0)
  • I buy lots of stuff there - Robert Bondi 18:54:46 03/14/02 (9)
    • great aren't they...more - Greg 19:28:54 03/14/02 (8)
      • Greg, did you see my gauge panel? - Adam Wilson 10:16:49 03/15/02 (2)
        • Those E28 guys must have more room... - Robert Bondi 10:27:35 03/15/02 (1)
          • Re: Those E28 guys must have more room... - Adam Wilson 13:06:43 03/15/02 (0)
      • Re: great aren't they...more - Robert Bondi 19:44:25 03/14/02 (4)
        • Re: great aren't they...more - Greg 19:45:40 03/14/02 (3)
          • Re: great aren't they...more - Robert Bondi 20:23:40 03/14/02 (2)
            • angle rings.... - Greg 21:01:24 03/14/02 (1)
              • Mounting Scheme - Robert Bondi 21:54:14 03/14/02 (0)
• Radio Mounting Cover Thingy - Mishast 17:34:02 03/14/02 (1)
  • The radio on my car... - Kevin Kew 17:57:21 03/14/02 (0)
• headers - matt 17:21:55 03/14/02 (4)
  • Re: I have Stahl, but Paeco looks very similar - Bill Barrett 21:50:27 03/14/02 (0)
  • Re: headers - Troy Rudolph 17:40:49 03/14/02 (2)
    • Re: headers - Derek 09:05:29 03/15/02 (0)
    • Re: headers - matt 21:21:11 03/14/02 (0)
• I Need a good Paint Job in Southern Cali - Matt Evans 13:40:56 03/14/02 (1)
  • Re: I Need a good Paint Job in Southern Cali - Matt Evans 13:42:06 03/14/02 (0)
• E12 Stuff For Sale......... - Matt Evans 13:39:01 03/14/02 (1)
  • nice email address.... switch "Sw" and "N" ..(eom) - Adam Wilson 13:58:33 03/14/02 (0)
• Paging Karl K - Peter Florance 12:33:28 03/14/02 (1)
  • Re: Paging Karl K - Karl 16:52:31 03/15/02 (0)
• FS new in box Bilsteins.... - Scott 10:26:03 03/14/02 (8)
  • These are the part numbers...anyone know?? - Scott 12:29:24 03/14/02 (4)
    • Ok, what about part number B46-801? - Frank H 22:52:10 03/14/02 (1)
      • I can't find, try Bilstein at 800-745-4636 (CT) - Kendell 07:58:16 03/15/02 (0)
    • 1982 and earlier 6-series HD rears - Kendell 15:23:09 03/14/02 (1)
      • Thanks Kendall! nt - Scott 15:42:39 03/14/02 (0)
  • HDs or sports?. - mikey 10:28:04 03/14/02 (1)
    • Ill check when I get home...I cant remember!! nt - Scott 10:31:18 03/14/02 (0)
  • oops..they are for the rear! thanks - Scott 10:27:47 03/14/02 (0)
• Looking for the best price on Koni - Tony Rodriguez 10:14:48 03/14/02 (0)
• Can anyone spare a part number.... - Scott 09:29:46 03/14/02 (2)
  • Re: Can anyone spare a part number.... - Kaveman 10:06:02 03/14/02 (1)
    • GO Se an, GO Se an....its yer birthday, its yer - Scott 10:19:05 03/14/02 (0)
• Manual door windows - Gene S 07:26:24 03/14/02 (0)
• Gas gauge malfunction! - karl sisson 06:56:53 03/14/02 (1)
  • Re: Gas gauge malfunction! - Mishast 15:58:42 03/14/02 (0)
• Does anyone have free Carfax? - Catfish 23:01:54 03/13/02 (2)
  • The last state it was registered in will have , , - Jefflee 10:21:02 03/14/02 (1)
    • Thanks, I guess they cant process extra vin# of Eu - Catfish 12:05:51 03/14/02 (0)
• Fuming in the Garage and a 'wee' bit 'o info , , , - Jefflee 22:34:22 03/13/02 (3)
  • Re: Fuming in the Garage and a 'wee' bit 'o info , , , - Robert Bondi 10:15:50 03/14/02 (2)
    • Will replace with 17mm (got'em out - tuff) (nt) - Jefflee 10:23:39 03/14/02 (1)
      • Leave in the 15's youll have more room.. - Scott 10:29:15 03/14/02 (0)
• Filling the cooling system. - T.Han 22:33:10 03/13/02 (2)
  • Re: Filling the cooling system. - Eddie 17:30:44 03/14/02 (0)
  • Re: Filling the cooling system. - Peter Florance 06:38:40 03/14/02 (0)
• Did 'Funfer' ever sell that '79 528i in Atlanta? - Jeff Olson 22:15:34 03/13/02 (3)
  • Dont think so, I think he fell in love with it ... - Scott 08:20:17 03/14/02 (2)
    • I think he's doing a 5/sp swap under a new name , - Jefflee 10:09:51 03/14/02 (1)
      • LOL!!! good one....nt - Scott 10:30:16 03/14/02 (0)
• Crash Tests..... and... an E12? - Kaveman 21:20:51 03/13/02 (6)
  • Actually, I Have Stood Right Next To That E12 - Peter Maag 20:03:51 03/15/02 (0)
  • Re: Crash Tests..... and... an E12? - Eddie 17:19:30 03/14/02 (0)
  • we'll be in Munich in a month - Adam Wilson 11:22:11 03/14/02 (0)
  • Re: Crash Tests..... and... an E12? - T. Han 21:54:38 03/13/02 (2)
    • Re: Crash Tests..... and... an E12? - Mark 22:16:48 03/13/02 (1)
      • Re: Crash Tests..... and... an E12? - Mr. Coffey 22:26:51 03/13/02 (0)
• Belt changing questions - Mr. BILL 18:40:27 03/13/02 (3)
  • Re: Belt changing questions - Scott 09:49:33 03/14/02 (2)
    • Re: AC Belt is easy, ........ - Peter Claassen 17:10:46 03/14/02 (1)
      • Re:Thanks guys! - Mr. BILL 19:24:46 03/14/02 (0)
• Anyone recommend a good paint shop in the Bay Area - Gilbert 14:03:27 03/13/02 (0)
• Power steering removal, what's involved? - Adam Wilson 10:30:03 03/13/02 (5)
  • My .o2 on the pwr steering thing.... - Scott 16:20:22 03/13/02 (0)
  • Re: Power steering removal, what's involved? - Frank H 10:43:39 03/13/02 (3)
    • Re: Power steering removal, what's involved? - Mark 11:41:02 03/13/02 (2)
      • Re: Power steering removal, what's involved? - Matt B 08:35:51 03/15/02 (1)
        • Re: Power steering removal, what's involved? - Mark 12:13:44 03/15/02 (0)
• Paging GCW. How 'd ya do on Heater Valve?? nt - Jefflee 09:55:26 03/13/02 (1)
  • Re: Paging GCW. How 'd ya do on Heater Valve?? nt - CGW 20:47:12 03/13/02 (0)
• Part Number question Gentlemen......... - Scott 08:42:07 03/13/02 (12)
  • I order an extra!!Anyone need it??? - Scott 11:09:36 03/13/02 (0)
  • Hey Scott ! I do not have a check valve on my - Jefflee 09:49:26 03/13/02 (8)
    • You want hear something sick??? - Scott 09:59:12 03/13/02 (7)
      • Awfully large fraction of 5 min rebuild - Robert Bondi 12:47:07 03/13/02 (3)
        • Off the Topic... - Jim Hartwell 21:54:46 03/13/02 (2)
          • Thanks - Robert Bondi 10:10:11 03/14/02 (1)
            • Re: Thanks - Jim Hartwell 00:57:40 03/15/02 (0)
      • Re: You want hear something sick??? - Kaveman 10:05:49 03/13/02 (2)
        • Yeah, interesting family dynamics.... - Lars BendOr e12z 15:42:10 03/13/02 (1)
          • SO !! That's what that sound was . . . . (nt) - Jefflee 19:57:19 03/13/02 (0)
  • your lucky day - Peter Florance 09:47:18 03/13/02 (1)
    • Thanks Peter!!! nt - Scott 10:45:05 03/13/02 (0)
• paging catfish - stewart 05:25:59 03/13/02 (2)
  • Re: paging catfish - Catfish 22:01:25 03/13/02 (1)
    • Re: paging catfish - stewart 23:10:15 03/13/02 (0)
• 78 530i FS - greghill 21:02:22 03/12/02 (0)
• Oregon Politics Avant Garde-You'll like this one - Lars BendOr e12z 20:42:17 03/12/02 (6)
  • Re: Oregon Politics Avant Garde-You'll like this one - T.Han 00:38:48 03/13/02 (3)
    • maybe I missed something - Adam Wilson 10:10:30 03/13/02 (2)
      • Re: maybe I missed something - T.Han 22:16:31 03/13/02 (0)
      • Gasohol -- Corneesel ?? (nt) - Jefflee 11:56:27 03/13/02 (0)
  • So polititians are ***holes in the U.S. too? - Chad Z 20:53:08 03/12/02 (1)
    • Re: So polititians are ***holes in the U.S. too? - jason daniels 11:36:48 03/13/02 (0)
• Paging Steve C. - Chad Z 20:26:05 03/12/02 (3)
  • Re: Dalership had to order parts... - John in NH 21:45:27 03/13/02 (0)
  • I think you want John in NH - Steve C. 09:54:28 03/13/02 (1)
    • oops..... NT - Chad Z 14:37:23 03/13/02 (0)
• SA e12 with e28 dash question - ...tom 18:12:04 03/12/02 (6)
  • Another option somewhat easier.... - Lars BendOr e12z 19:28:11 03/12/02 (0)
  • Re: SA e12 with e28 dash question - Troy Rudolph 19:22:41 03/12/02 (0)
  • Swap looks difficult - Peter Claassen 18:45:07 03/12/02 (3)
    • Re: Swap looks difficult - Remy Davison 08:14:06 03/14/02 (0)
    • yea, but.... - ...tom 19:36:08 03/12/02 (1)
      • Re: yea, but.... - Mark 22:59:29 03/12/02 (0)
• Installing radiator. - T.Han 17:19:09 03/12/02 (3)
  • t - ...tom 18:08:56 03/12/02 (2)
    • Re: t - T. Han 22:23:21 03/13/02 (0)
    • Re: t - T.Han 00:33:07 03/13/02 (0)
• tips on vacuum leak test w/ propane? - Robert Bondi 17:15:02 03/12/02 (8)
  • Re: tips on vacuum leak test w/ propane? - Jim Hartwell 01:37:13 03/15/02 (0)
  • Re: tips on vacuum leak test w/ propane? - Peter Florance 17:18:10 03/13/02 (1)
    • pumping brakes - Robert Bondi 10:01:42 03/14/02 (0)
  • Re: tips on vacuum leak test w/ propane? - mikey 00:55:58 03/13/02 (4)
    • Re: tips on vacuum leak test w/ propane? - Robert Bondi 12:50:32 03/13/02 (0)
    • Not fallin for the potatoe in the tailpipe trick - Scott 09:25:38 03/13/02 (2)
      • Thanks guys... - Robert Bondi 12:42:38 03/13/02 (0)
      • LOL, nice. - Adam Wilson 10:32:08 03/13/02 (0)
• Thinking of selling.... - Charles 15:51:31 03/12/02 (0)
• Flush side marker mod??? - Chad Z 15:23:01 03/12/02 (4)
  • Re: Ron Weltons Marker lites and turn signals - Lars BendOr e12z 00:22:20 03/14/02 (0)
  • Re: Flush side marker mod??? - Rambo 22:25:48 03/12/02 (0)
  • Re: Flush side marker mod??? - Kaveman 19:38:38 03/12/02 (1)
    • Ya I love that everything about that car - Chad Z 20:30:30 03/12/02 (0)
• e21 323 for sale - Brian 14:54:22 03/12/02 (0)
• For that matter Id take a drive- shaft if cheap... - Catfish 12:51:46 03/12/02 (0)
• Transmission hardware wanted.... - Catfish 12:50:50 03/12/02 (2)
  • Re: Transmission hardware wanted.... - mikey 01:18:24 03/13/02 (1)
    • Re: Transmission hardware wanted.... - Catfish 22:05:53 03/13/02 (0)
• FS 78 530I wheels...near perfect!! - Scott 09:56:20 03/12/02 (4)
  • Re: FS 78 530I wheels...near perfect!! - Jimmie 17:38:02 03/12/02 (1)
    • I can email you some nt - Scott 22:24:45 03/12/02 (0)
  • How do the Cromodoras look? Pics please!! - TCD 11:44:14 03/12/02 (1)
    • Ill snap some pics as soon as it stops raining..nt - Scott 12:23:24 03/12/02 (0)
• very nice 16" BBS wheels on Ebay - Adam Wilson 09:43:08 03/12/02 (1)
  • Re: very nice 16" BBS wheels on Ebay - Tony Rodriguez 20:52:49 03/13/02 (0)
• 78 530i marker light lens - Audiotek 02:24:38 03/12/02 (6)
  • Re: 78 530i marker light lens - Brent 21:05:08 03/13/02 (0)
  • hey audiotek.. - Peter Florance 17:19:57 03/13/02 (1)
    • RE: PETER - Audiotek 21:11:14 03/13/02 (0)
  • Re: 78 530i marker light lens - Patrick 09:47:41 03/12/02 (1)
    • RE:PATRICK - Audiotek 21:20:35 03/13/02 (0)
• 78 530i marker light lens - Audiotek 02:24:33 03/12/02 (0)
• 5-speed Motronics Interior Upgrade For Sale - Michael Longeneker 01:13:50 03/12/02 (0)
• Windsor picknpull - BIGERIK 00:31:22 03/12/02 (0)
• Differential ratio & other questions - Pat H. 23:28:52 03/11/02 (3)
  • Re: Differential ratio & other questions - Peter Florance 07:49:43 03/12/02 (2)
    • Peter , , How rare is the 3.25 w/cooling cannister - Jefflee 07:55:43 03/12/02 (1)
      • Re: Peter , , How rare is the 3.25 w/cooling cannister - Peter Florance 17:24:43 03/12/02 (0)
• Fundraiser - Part II - Eric Q 21:52:45 03/11/02 (18)
  • Re: Fundraiser - Part II - Eric Q 00:55:00 03/14/02 (0)
  • more on grill badges - Adam Wilson 16:49:57 03/12/02 (0)
  • Name recognition - Steve C. 10:13:44 03/12/02 (8)
    • Re: Name recognition - Troy Rudolph 13:46:49 03/12/02 (2)
      • I would want black. Sorry. Grill Badge with , , - Jefflee 15:22:12 03/12/02 (1)
        • Re: I would want black. Sorry. Grill Badge with , , - Derek 16:04:16 03/12/02 (0)
    • Grill Badge would be the ultimate way 2 go! - Scott 11:02:39 03/12/02 (4)
      • Re: Grill Badge would be the ultimate way 2 go! - Robert Bondi 17:05:16 03/12/02 (0)
      • Re: Grill Badge would be the ultimate way 2 go! - Derek 16:07:09 03/12/02 (1)
        • Let's get some designs going, , round?, oblong lik - Jefflee 16:25:58 03/12/02 (0)
      • Grill Badge -- 1 vote yes - Jeff C 14:48:56 03/12/02 (0)
  • firstfives logo grill badge - Adam Wilson 09:39:51 03/12/02 (4)
    • Great Idea - need help with the design? - Randy McCafferty 20:46:21 03/12/02 (1)
      • Re: Great Idea - need help with the design? - Mishast 13:59:44 03/13/02 (0)
    • Badges? We ain't gotta show you no badges! - Chuck Denson 10:31:49 03/12/02 (0)
    • This idea gets me going !! (nt) - Jefflee 10:26:27 03/12/02 (0)
  • Re: Fundraiser - Part II - Jim Hineline 22:14:44 03/11/02 (1)
    • Put me down for a hat!! nt - Scott 08:48:07 03/12/02 (0)
• Fundraiser - Part II - Eric Q 21:46:44 03/11/02 (1)
  • Sorry for the repeated message...(nt) - Eric Q 21:53:36 03/11/02 (0)
• diff btwn 3.07 and 3.45 diffs - ...tom 20:19:46 03/11/02 (1)
  • Yes !!!!! (nt) - Jefflee 20:46:58 03/11/02 (0)
• Engine questions for the pros... - Steve C. 18:34:37 03/11/02 (4)
  • Said Directly: "Get the Straw Out of There" (nt) - Jefflee 22:18:33 03/12/02 (0)
  • Re: Engine questions for the pros... - Jim Hartwell 18:37:38 03/12/02 (0)
  • Re: Engine questions for the pros... - Mark 06:49:48 03/12/02 (0)
  • How about a Shop Vac? That might pull it out... - JB 19:39:56 03/11/02 (0)
• Heater Hoses, Standard Sized?[re-post] - Joe Hood 18:21:59 03/11/02 (2)
  • Re: Heater Hoses, Standard Sized?[re-post] - Robert Bondi 20:48:33 03/11/02 (1)
    • I believe these hoses or preformed/bent , , , - Jefflee 20:52:56 03/11/02 (0)
• E12 in disrepair. - Dean 16:10:27 03/11/02 (11)
  • DEAN...check your mail,thanx.... nt - Scott 09:27:46 03/12/02 (0)
  • Part #'s - Kaveman 17:20:05 03/11/02 (6)
    • Close - Dean 17:59:14 03/11/02 (5)
      • that's the Place! - Kaveman 18:36:51 03/11/02 (0)
      • BEWARE: new thermostat housing - Robert Bondi 18:06:46 03/11/02 (3)
        • The one I have is stamped 79 and 80 in a circle - Dean 18:11:40 03/11/02 (1)
          • You should be fine, then. - Robert Bondi 18:26:59 03/11/02 (0)
        • I'll keep the old one for reference, THANKS - Dean 18:08:50 03/11/02 (0)
  • I can send you that t stat housing..I have an extr - Scott 16:20:59 03/11/02 (2)
    • You name it. - Dean 16:32:48 03/11/02 (1)
      • Just give the board a few bucks, Ill send it out - Scott 16:41:57 03/11/02 (0)
• 5spd short shifters - fred 13:07:31 03/11/02 (1)
  • Use the Search to the left of the posts. (nt) - Jefflee 18:01:11 03/11/02 (0)
• forgot the more - steve C. 12:51:23 03/11/02 (4)
  • Would happen to me... - Kevin Kew 15:03:24 03/11/02 (0)
  • Re: forgot the more - Don Daynes 13:09:34 03/11/02 (2)
    • Re: another thing to check - Peter Claassen 14:43:23 03/11/02 (1)
      • Re: another thing to check - Steve C 18:27:24 03/11/02 (0)
• Turn signal light constantly on and more - Steve C. 12:48:27 03/11/02 (0)
• 78 530 makes a high pitched whine at higher rpms - Steve D 12:12:27 03/11/02 (4)
  • I hear this alot - Kevin Kew 15:05:37 03/11/02 (3)
    • Re: I hear this alot - Steve D 17:10:31 03/11/02 (2)
      • Re: I hear this alot - Peter Florance 07:00:21 03/12/02 (0)
      • Re: I hear this alot - Kaveman 17:49:20 03/11/02 (0)
• 0 to 60 times.... - billy 11:22:35 03/11/02 (5)
  • my bad... 80 528i, stock, just tuned, runs perfect - billy 13:03:00 03/11/02 (0)
  • Re: 0 to 60 times.... - Scott 11:49:07 03/11/02 (0)
  • Re: 0 to 60 times.... - Patrick Goss 11:48:56 03/11/02 (2)
    • 8.2 or 8.3 seconds - Mark 01:51:44 03/12/02 (1)
      • Thanks(nt) - billy 13:36:37 03/12/02 (0)
• Need Another Oil Pan! - Dave Farrell 10:32:03 03/11/02 (1)
  • Dave, I have one or two - Jeff C 10:48:49 03/11/02 (0)
• How to accurately determin lift of a cam? - Bill Barrett 10:12:21 03/11/02 (5)
  • Re: How to accurately determin lift of a cam? - Peter Florance 20:38:37 03/11/02 (0)
  • Interesting...Nice challenge.... How about this... - Lars BendOr e12z 11:38:58 03/11/02 (3)
    • Re: That's a good idea..what I was thinking. - Bill Barrett 11:56:17 03/11/02 (0)
    • Oh... BTW.... My first idea???? - Lars BendOr e12z 11:53:43 03/11/02 (1)
      • Re: Oh... BTW.... My first idea???? - Mark 21:51:50 03/11/02 (0)
• anyone has any info on shifter plate please let me - Scott 08:22:17 03/11/02 (3)
  • Kaveman to the RESCUE!!! Thanks Sean!! nt - Scott 11:22:01 03/11/02 (0)
  • Plate... 2002 Shifter.... - Kaveman 09:47:16 03/11/02 (1)
    • Yeah, the Table on the 5spd - Scott 09:56:04 03/11/02 (0)
• 1 more time thanks..FS 3:45 LSD, anyone that wants - Scott 08:15:58 03/11/02 (1)
  • SOLD!! Thanks Guys!! nt - Scott 10:59:44 03/12/02 (0)
• gauges Dun-Rite - Greg 08:13:55 03/11/02 (1)
  • Thats Brad C's from Roadfly E28 baord NIIICE!!!! - Scott 08:17:44 03/11/02 (0)
• Short shifter question - Scott 08:13:41 03/11/02 (2)
  • Re: Short shifter question - Peter Claassen 11:35:56 03/11/02 (0)
  • Re: Short shifter question - T.Han 09:14:09 03/11/02 (0)
• 3rd club driver's school with the euro 528i - Peter Florance 07:47:44 03/11/02 (0)
• Engine Numbers !Bought 76 530i. Worried about head - karl sisson 06:25:00 03/11/02 (2)
  • Agree w/Mark. After a number of 77 e12z, the only> - Lars BendOr e12z 11:47:03 03/11/02 (0)
  • Re: Engine Numbers !Bought 76 530i. Worried about head - Mark 07:07:22 03/11/02 (0)
• Using 524td muffler / Great Test drive - Scott J. 20:50:01 03/10/02 (1)
  • Re: Using 524td muffler / Great Test drive - Don Daynes 21:17:04 03/10/02 (0)
• Hanes Manual Question - CGW 19:51:46 03/10/02 (13)
  • Re: Hanes Manual Question - Robert Bondi 10:09:44 03/11/02 (11)
    • Re: Hanes Manual Question - cgw 11:34:18 03/11/02 (0)
    • HE LIVES!!! sup Robert..you back?? nt - Scott 10:12:39 03/11/02 (9)
      • yeah man, I'm back - Robert Bondi 10:24:18 03/11/02 (8)
        • Good For You... - Scott 11:06:42 03/11/02 (4)
          • Re: Good For You... - Robert Bondi 13:15:50 03/11/02 (3)
            • I put a Black Log on Mine !!!!! (nt) - Jefflee 17:49:05 03/11/02 (0)
            • Wait and look at mine...you might change ur mind.. - Scott 14:18:15 03/11/02 (1)
              • UR , , , don't you mean EWEr ? (nt) - Jefflee 20:54:51 03/11/02 (0)
        • Hey Robert !! You've got a LOT of reading to do ! - Jefflee 11:06:07 03/11/02 (2)
          • Re: Hey Robert !! You've got a LOT of reading to do ! - Robert Bondi 13:18:12 03/11/02 (0)
          • Re: Hey Robert !! You've got a LOT of reading to do ! - Robert Bondi 13:17:55 03/11/02 (0)
  • another 530i owner please weigh in here. - Peter Florance 05:12:08 03/11/02 (0)
• attn GCW - Peter Florance 19:06:01 03/10/02 (11)
  • Re: attn GCW - CGW 19:55:25 03/10/02 (10)
    • CA spec 530i? - Peter Florance 05:08:58 03/11/02 (9)
      • Re: CA spec 530i? - CGW 11:24:35 03/11/02 (6)
        • timing specs - Pete Florance 20:53:44 03/11/02 (0)
        • the good news... - Peter Florance 20:42:32 03/11/02 (1)
          • What's that ??????? (nt) - Jefflee 20:49:27 03/11/02 (0)
        • The Dreaded Heater Control Valve !!! (nt) - Jefflee 17:46:52 03/11/02 (2)
          • Re: The Dreaded Heater Control Valve !!! (nt) - CGW 18:03:09 03/11/02 (1)
            • Take off the cover under the steering wheel and - Jefflee 19:00:33 03/11/02 (0)
      • Re: CA spec 530i? - Don Daynes 09:10:26 03/11/02 (0)
      • Peter could his Dist be off a gear or two?? nt - Scott 08:20:33 03/11/02 (0)
• 200 miles! - Chuck Denson 18:55:58 03/10/02 (0)
• Archived! - Troy Rudolph (Webmaster) 18:17:32 03/10/02 (2)
  • Ahha!!! - Peter Florance 18:58:46 03/10/02 (1)
    • Re: Ahha!!! - Troy Rudolph (Webmaster) 23:59:19 03/10/02 (0)