Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XX

(2002/05/16 - 2002/06/20)

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• no horn - jim petersen 17:59:02 06/20/02 (0)
• E12 meets?? Southern California - Curt Bachmann 16:33:36 06/20/02 (1)
  • Re: E12 meets?? Southern California - Don Daynes 17:01:09 06/20/02 (0)
• AAAAAAAckkkk....i found cancer on my e12!!!!!! - Curt Bachmann 15:02:38 06/20/02 (8)
  • Curt: I have 4 FREE doors w/ NO Rust in LA - Chris 18:13:01 06/20/02 (0)
  • Door on eBay - Jim Davis 16:46:06 06/20/02 (0)
  • How bad is the spare tire well. - Lars BendOr e12z.... 15:53:54 06/20/02 (5)
    • Re: How bad is the spare tire well. - Curt Bachmann 16:30:21 06/20/02 (4)
      • Re: How bad is the spare tire well. - Bob Iverach 19:03:59 06/20/02 (0)
      • Where can i get some of thos boiled linseed oil ?? - Derek 17:03:29 06/20/02 (2)
        • Old style hardware stores, some paint stores - Lars BendOr e12z 18:41:38 06/20/02 (0)
        • Re: Where can i get some of thos boiled linseed oil ?? - Curt Bachmann 17:24:11 06/20/02 (0)
• Is an oil pressure gauge worth it? - Michael 14:20:20 06/20/02 (1)
  • Yes - Robert Bondi 14:29:31 06/20/02 (0)
• 5er Fest 2002 Registration Update - Jim Davis - 5er Fest 2002 Treasurer 13:41:08 06/20/02 (2)
  • Re: 5er Fest 2002 Registration CORRECTION - Jim Davis - 5er Fest 2002 Treasurer 15:42:14 06/20/02 (1)
    • Re: 5er Fest 2002 Registration CORRECTION - Jim Davis - 5er Fest 2002 Treasurer 15:51:53 06/20/02 (0)
• Dyno Day in Thomasville GA 31799 - Duke - 85 M535i/Hartge 12:25:10 06/20/02 (0)
• Recharging A/C On '81 528i - Peter Maag 11:03:08 06/20/02 (2)
  • Re: R12 - Dave Spencer 15:02:35 06/20/02 (1)
    • Re: Forgot one important thing... - Dave Spencer 19:45:21 06/20/02 (0)
• starting it up... - Kevin Kew 10:54:06 06/20/02 (5)
  • Re: starting it up... - Peter Florance 11:15:48 06/20/02 (4)
    • well... - Kevin Kew 11:20:42 06/20/02 (3)
      • figured it out but still need help. - Kevin Kew 16:23:28 06/20/02 (2)
        • Re: figured it out but still need help. - gfubini 17:26:38 06/20/02 (1)
          • disconnected and clamped. no luck. - Kevin kew 19:05:22 06/20/02 (0)
• buying a parts donor car, what to expect? - Adam Wilson 10:26:07 06/20/02 (7)
  • There is a Euro-218hp w/CR 5sp, 136K on , , , - Jefflee 19:40:12 06/20/02 (0)
  • the unexpected - ...tom 18:57:21 06/20/02 (0)
  • parts car - IPM 11:37:25 06/20/02 (0)
  • Re: buying a parts donor car, what to expect? - stewart 11:35:13 06/20/02 (0)
  • PITA and little interest in parts - Lars Bend Oregon 11:04:50 06/20/02 (2)
    • Buy the right car & get your drivetrain for free!! - TCD 11:32:07 06/20/02 (1)
      • Hey... I knew he'd show.... Master De/Recycler.... - Lars BendOr 15:39:03 06/20/02 (0)
• Finally Got Pictures Of My Car - Mark Dvorak 05:14:34 06/20/02 (2)
  • I had to look outside... - Ryan Bryan 16:53:29 06/20/02 (0)
  • beautiful (nt) - greghill 09:41:30 06/20/02 (0)
• Paint Material? - Sam R. 00:52:55 06/20/02 (1)
  • Re: M535i Spoiler Pics - Alan A 11:31:40 06/20/02 (0)
• Turn signal glitch - T.Han 22:17:24 06/19/02 (5)
  • Re: Turn signal glitch - Lou 14:32:00 06/20/02 (3)
    • Re: Turn signal glitch - T.Han 15:08:33 06/20/02 (2)
      • Re: Turn signal glitch - Lou 15:35:58 06/20/02 (1)
        • Re: Turn signal glitch - T.Han 16:10:58 06/20/02 (0)
  • Re: Turn signal glitch - Peter Florance 06:34:51 06/20/02 (0)
• how to soften the suspension and ride? - Robert Bondi 20:20:09 06/19/02 (19)
  • Other years - Mike W. 01:05:05 06/20/02 (0)
  • Custom Springs....May sound extreme. - Lars Bend Or 21:57:24 06/19/02 (11)
    • Re: Custom Springs....May sound extreme. - Robert Bondi 22:15:19 06/19/02 (10)
      • Oh well, if that's all you want to know>>>> - Lars BendOr e12z 22:29:47 06/19/02 (9)
        • We call them "Dead Policemen" in Georgia and - Jefflee 19:46:53 06/20/02 (0)
        • Re: Oh well, if that's all you want to know>>>> - Robert Bondi 22:56:32 06/19/02 (7)
          • Re: I'm reminded of a log wagon... - Dave Spencer 15:11:41 06/20/02 (1)
            • Euro bumper bait returned - Robert Bondi 15:30:24 06/20/02 (0)
          • As you may gather, I am an old hot-rodder>>>> - Lars Bend Or 23:15:36 06/19/02 (4)
            • Pre 1977 e12s ride better - Marc 06:31:05 06/20/02 (3)
              • seats are restuffed (nt) - Robert Bondi 09:58:44 06/20/02 (0)
              • Re: Pre 1977 e12s ride better - 1976 530i - Fer 09:57:50 06/20/02 (1)
                • Re: Pre 1977 e12s ride better - 1976 530i - Marc 11:11:36 06/20/02 (0)
  • Re: how to soften the suspension and ride? - Peter Florance 20:34:36 06/19/02 (5)
    • Re: how to soften the suspension and ride? - Robert Bondi 21:07:49 06/19/02 (4)
      • Re: how to soften the suspension and ride? - Marc 11:07:00 06/20/02 (3)
        • Re: how to soften the suspension and ride? - Peter Florance 13:44:32 06/20/02 (0)
        • tire pressure - Robert Bondi 11:23:21 06/20/02 (1)
          • I agree... - Dave Spencer 16:26:14 06/20/02 (0)
• Question about leaky fuel injector - Mr. Coffey 20:08:58 06/19/02 (3)
  • Question about leaky fuel injector - Peter Florance 20:38:50 06/19/02 (2)
    • Thanks Peter (more) - Mr. Coffey 12:20:50 06/20/02 (1)
      • leaky fuel - benji 12:33:16 06/20/02 (0)
• Old seat question again ... - Jeff C 20:04:01 06/19/02 (2)
  • he means L7 - Peter Florance 20:32:07 06/19/02 (1)
    • Re: he means L7 - Marc 11:15:00 06/20/02 (0)
• FS: 1979 528i 5-speed - Matthew 20:02:42 06/19/02 (0)
• cast...forged...cast....forged... - j. griffith 18:33:53 06/19/02 (1)
  • Re: xxxx...forged...xxxx....forged... - Wietse 19:06:07 06/19/02 (0)
• June 2002 Car of the Month - Junkyard Warrior 17:28:18 06/19/02 (0)
• nice 528i in SC, original owner, window sticker - Adam Wilson 12:12:23 06/19/02 (0)
• Dodge Lancer ES picture - Greg 12:03:49 06/19/02 (2)
  • Re: Dodge Lancer ES picture - Troy Rudolph (Webmaster) 12:42:15 06/19/02 (1)
    • earlier discussion related to dead pedal (eom) - Greg 12:48:39 06/19/02 (0)
• need bigger swaybars - ...tom 11:47:13 06/19/02 (7)
  • Re: need bigger swaybars - Peter Florance 19:49:52 06/19/02 (3)
    • Re: need bigger swaybars - Troy Rudolph 14:18:59 06/20/02 (0)
    • Usually 22mm rear goes with 28mm front (nt) - Eric Q 23:28:08 06/19/02 (0)
    • smiling...(nt) - Robert Bondi 20:03:05 06/19/02 (0)
  • Re: need bigger swaybars - Troy Rudolph 12:44:29 06/19/02 (0)
  • Re: need bigger swaybars - Dwight Plucker 12:05:40 06/19/02 (1)
    • Re: need bigger swaybars - Blair 17:28:08 06/19/02 (0)
• Need part number for Sunroof Switch! please? - Fer 11:41:18 06/19/02 (3)
  • parts CD - Robert Bondi 16:26:27 06/19/02 (1)
    • Re: parts CD - - Thermal reactor quest...!! - Fer 09:10:47 06/20/02 (0)
  • Re: Need part number for Sunroof Switch! please? - Jim Davis 14:08:56 06/19/02 (0)
• Bodies... - norbie 11:23:38 06/19/02 (0)
• Help, Broken AC Switch - Peter Maag 11:13:25 06/19/02 (2)
  • I got a used one if you want it - Peter Florance 11:37:38 06/19/02 (1)
    • Re: I got a used one if you want it - Peter Maag 21:57:16 06/19/02 (0)
• temp control switch removal - chuck 11:01:27 06/19/02 (2)
  • Re: temp control switch removal - Peter Florance 06:15:08 06/20/02 (1)
    • Re: temp control switch removal - chcuk 10:18:08 06/20/02 (0)
• Finally bothered to work out fuel econ - Remy Davison 10:15:44 06/19/02 (0)
• Sanden kit problems on E28 board - Greg 06:55:34 06/19/02 (2)
  • It's not Sanden's fault - Peter Florance 06:59:33 06/19/02 (1)
    • Re: It's not Sanden's fault - Greg 07:06:48 06/19/02 (0)
• I love change - jessie 05:56:19 06/19/02 (1)
  • sorry wrong board - Peter Florance 06:56:35 06/19/02 (0)
• Rev limit increase - Joel 21:22:12 06/18/02 (5)
  • Re: Rev limit increase - Mike W. 21:35:08 06/18/02 (0)
  • Re: Rev limit increase - Troy Rudolph 21:28:16 06/18/02 (3)
    • Re: Rev limit increase - Joel 22:53:05 06/18/02 (2)
      • Re: Rev limit increase - Peter Florance 06:25:56 06/19/02 (1)
        • Ask Karl K. - Troy Rudolph 12:46:16 06/19/02 (0)
• digital motor electronic chip - Dan Lafley 21:00:21 06/18/02 (1)
  • Re: digital motor electronic chip - Karl 23:37:33 06/18/02 (0)
• Parking brake handle mount question - Peter Florance 20:29:52 06/18/02 (2)
  • Re: Parking brake handle mount question - T.Han 22:14:17 06/18/02 (1)
    • Re: Parking brake handle mount question - Peter Florance 06:20:37 06/19/02 (0)
• New Springs vs. Camber Plates , , , , , , , ,, - Jefflee 19:30:10 06/18/02 (6)
  • This does not help an e12, but you can solve an - IPM 12:56:00 06/19/02 (0)
  • Re: New Springs vs. Camber Plates , , , , , , , ,, - Peter Florance 20:27:04 06/18/02 (4)
    • Where to buy? - Joel 23:29:55 06/18/02 (3)
      • Re: Where to buy? - Peter Florance 06:23:51 06/19/02 (2)
        • My car has E-24 springs!! Where can I get , , , - Jefflee 07:44:31 06/19/02 (1)
          • Re: My car has E-24 springs!! Where can I get , , - Adam Wilson 16:39:39 06/19/02 (0)
• e12 M535 in Gainsville, GA - Robert Knowlton 17:36:29 06/18/02 (4)
  • Re: e12 M535 in Gainsville, GA - Joel 20:49:34 06/19/02 (0)
  • You should of let me know...I can hit that car w/a - Scott 18:47:18 06/19/02 (0)
  • Re: e12 M535 in Gainsville, GA - james 02:02:39 06/19/02 (1)
    • Re: e12 M535 in Gainsville, GA - Adam Wilson 09:34:56 06/19/02 (0)
• Driveline Services of Portland - Greg 17:26:29 06/18/02 (0)
• FYI: Rodd's A/C kit - Greg 17:02:56 06/18/02 (0)
• Summer Sale - Medfly 16:39:45 06/18/02 (0)
• e12's for sale - mark 16:24:42 06/18/02 (0)
• Heater Fan Motors - Behr or Bosch - Troy Rudolph 15:13:31 06/18/02 (3)
  • Re: Heater Fan Motors - Behr or Bosch - Greg 18:35:40 06/18/02 (2)
    • Re: Heater Fan Motors - Behr or Bosch - Peter Claassen 19:31:45 06/19/02 (1)
      • Roadfly FAQs ? - Robert Bondi 20:25:20 06/19/02 (0)
• Overheating, very strange cause, HELP - Jordan Angle 13:03:51 06/18/02 (15)
  • Agree with Bondi (again). Check thermostat first - Lars Bend Or 16:42:02 06/18/02 (0)
  • pressure - Robert Bondi 14:15:14 06/18/02 (0)
  • Re: Overheating, very strange cause, HELP - james 13:31:32 06/18/02 (11)
    • Re: Overheating, very strange cause, HELP - Troy Rudolph 15:10:41 06/18/02 (10)
      • Re: Overheating, very strange cause, HELP - Karl 23:47:50 06/18/02 (8)
        • Re: Overheating, very strange cause, HELP - Mike W. 01:27:56 06/19/02 (6)
          • question about steel impeller - Peter Florance 06:27:38 06/19/02 (5)
            • Re: question about steel impeller - Mike W. 21:04:53 06/19/02 (4)
              • Re: question about steel impeller - Robert Bondi 21:15:16 06/19/02 (3)
                • Part numbers - Mike W. 00:38:30 06/20/02 (2)
                  • late M30 water pumps - Robert Bondi 10:37:44 06/20/02 (0)
                  • Link - Mike W. 00:49:31 06/20/02 (0)
        • water pump part # - Robert Bondi 00:18:24 06/19/02 (0)
      • very common on newer engines - Peter Florance 21:48:25 06/18/02 (0)
  • Re: Overheating, very strange cause, HELP - Troy Rudolph 13:29:00 06/18/02 (0)
• Didnt pass Inspection .... Continue - Michael 12:21:20 06/18/02 (11)
  • suggestion - Peter Florance 14:23:53 06/18/02 (10)
    • Did I Miss Something ?? I still don't know if , , - Jefflee 19:44:05 06/18/02 (9)
      • Re: Did I Miss Something ?? I still don't know if , , - Peter Florance 20:25:34 06/18/02 (8)
        • That's my point. He's not sure and bought - Jefflee 21:25:13 06/18/02 (7)
          • Re: That's my point. He's not sure and bought - Michael 22:59:51 06/18/02 (6)
            • yeah that's what I would do - Peter Florance 06:30:38 06/19/02 (5)
              • Did you try asking the inspector where the ,,,,,, - Jefflee 07:52:19 06/19/02 (4)
                • Inspectors! msg for Peter also - Michael 09:07:11 06/19/02 (3)
                  • any other Montreal e12 owners? - Peter Florance 09:47:47 06/19/02 (2)
                    • Actually... - Peter Florance 09:49:09 06/19/02 (1)
                      • Thank Peter - Michael 13:30:43 06/19/02 (0)
• !!!!!!! 5er FEST registration Dues !!!!!!!!! - Duke - 85 M535i/Hartge 10:09:45 06/18/02 (0)
• Best place to get replacement Fuses? - Mark Dvorak 01:48:52 06/18/02 (8)
  • Re: Best place to get replacement Fuses? - Peter Florance 06:36:58 06/18/02 (7)
    • Glass fuse problems - Mike W. 01:35:58 06/19/02 (2)
      • for some reason - Peter Florance 06:34:49 06/19/02 (1)
        • Nice - Mike W. 21:09:49 06/19/02 (0)
    • Re: Best place to get replacement Fuses? - Karl 23:53:05 06/18/02 (0)
    • hey electro-guru - greghill 08:43:33 06/18/02 (2)
      • Re: hey electro-guru - stewart 10:36:38 06/18/02 (0)
      • Re: hey electro-guru - Peter Florance 09:00:24 06/18/02 (0)
• brake fluids.....AGAIN - Curt Bachmann 22:42:31 06/17/02 (4)
  • Re: brake fluids.....AGAIN - Mishast 11:56:01 06/18/02 (0)
  • 3/4 + 5 =.tapioca - greghill 08:36:21 06/18/02 (0)
  • Re: brake fluids.....AGAIN - Walt Barie 07:33:25 06/18/02 (0)
  • Re: brake fluids.....AGAIN - Peter Florance 06:31:26 06/18/02 (0)
• Parts interchangeble? - Michael 19:17:39 06/17/02 (1)
  • Not if it's a 528e.....Almost no parts interchange - Lars Bend Or 19:58:14 06/17/02 (0)
• Site Server Scheduled Maintainance (downtime) - Peter Florance - First Fives Dictator for life 18:39:34 06/17/02 (1)
  • make that tuesday night/wed morning - Peter Florance 18:40:17 06/17/02 (0)
• diff mount update - ...tom 18:24:16 06/17/02 (0)
• Didnt pass inspection... Any Sugestions? - Michael 17:08:26 06/17/02 (9)
  • Re: Didnt pass inspection... Any Sugestions? - Canadian Bimmer 20:14:13 06/17/02 (4)
    • canadian bimmer - Michael 20:35:59 06/17/02 (3)
      • I used to live on Sherbrook (?) Love that City. - Jefflee 21:58:40 06/17/02 (2)
        • Good strip clubs in Sherbrook - John in NH 07:17:57 06/18/02 (1)
          • Oh, How times have changed Montreal !! nt - Jefflee 14:43:11 06/18/02 (0)
  • Where is the leak? How did they find it?? and , - Jefflee 17:36:43 06/17/02 (2)
    • Re: Where is the leak? How did they find it?? and , - Michael 18:39:09 06/17/02 (1)
      • Re: Where is the leak? How did they find it?? and , - Peter Florance 18:41:54 06/17/02 (0)
  • Re: Didnt pass inspection... Any Sugestions? - Jordan Angle 17:36:02 06/17/02 (0)
• Question: How to keep 5er Fest registration low? - Jim Davis 15:41:57 06/17/02 (2)
  • What kind of costs are you incurring? - Eric Q 17:53:34 06/17/02 (0)
  • don't offer much... - Peter Florance 17:37:41 06/17/02 (0)
• Tall Order. Sierra Beige e12 wanted. This Color - Lars Bend Oregon 15:04:12 06/17/02 (5)
  • Re: Tall Order. Sierra Beige e12 wanted. This Color - Eric Q 17:56:35 06/17/02 (0)
  • There just happens to be one here in Conyers that - Jefflee 17:44:41 06/17/02 (0)
  • Is Sierra Beige the same as Safari Beige? - David P 15:25:34 06/17/02 (2)
    • Safari beige lighter.... - Lars Bend Oregon 20:55:57 06/17/02 (0)
    • Re: Is Sierra Beige the same as Safari Beige? - Eric Q 17:45:44 06/17/02 (0)
• Rebuild project - Michael 12:36:09 06/17/02 (1)
  • Re: Rebuild project - Peter Claassen 23:33:32 06/17/02 (0)
• Euro bumpers for sale - Lars Bend Oregon 11:47:40 06/17/02 (3)
  • Re: Euro bumpers for sale - Mark Dvorak 01:53:29 06/18/02 (0)
  • Re: Euro bumpers for sale - Jimmie M. 12:50:53 06/17/02 (1)
    • Look to left of this page... See "classifieds" - Lars Bend Oregon 13:04:57 06/17/02 (0)
• Haynes Manual for 530i ????? - Fer 11:28:07 06/17/02 (2)
  • Re: Haynes Manual for 530i ????? - Ulrich Thieme 06:45:54 06/19/02 (1)
    • Re: Thanks Ulrich - Fer 12:21:10 06/19/02 (0)
• finally wired grill badge money - Adam Wilson 10:37:31 06/17/02 (0)
• Update on e12 restoration - Marc 06:18:59 06/17/02 (0)
• A/C circuit diode - Robert Bondi 01:51:19 06/17/02 (0)
• brake fluids..... - Curt Bachmann 00:55:14 06/17/02 (1)
  • As long as it's DOT4 - Peter Florance 10:09:31 06/17/02 (0)
• B Car Day - Randy Clark 23:16:04 06/16/02 (2)
  • Re: B Car Day - Harold 22:01:20 06/17/02 (0)
  • Great Price!! Can we all borrow it like the ,,,,, - Jefflee 07:55:32 06/17/02 (0)
• Another speedo question... - gfubini 22:02:10 06/16/02 (2)
  • Re: Another speedo question... - Ulrich Thieme 06:10:51 06/17/02 (1)
    • Re: Another speedo question... - gfubini 17:18:33 06/19/02 (0)
• Anybody's car creak and groan? - gfubini 21:56:49 06/16/02 (7)
  • Re: B pillars - Peter Claassen 23:38:13 06/17/02 (4)
    • Have seen an article on the B-pillar problem - Lars Bend Oregon 11:49:34 06/18/02 (3)
      • Re: Have seen an article on the B-pillar problem - Peter Florance 20:38:55 06/18/02 (0)
      • Re: Have seen an article on the B-pillar problem - Robert Bondi 16:19:07 06/18/02 (1)
        • Robert -- "DOWN BOY" !!!!!!!!! - Jefflee 19:58:49 06/18/02 (0)
  • diff mount - Peter Florance 08:39:41 06/17/02 (1)
    • Also take a look at the bolt for the sub-frame , , - Jefflee 17:56:50 06/17/02 (0)
• Boy, are cars gettin' big these days !! - Jefflee 20:47:02 06/16/02 (2)
  • Re: Boy, are cars gettin' big these days !! - Mike Thurman 13:32:52 06/17/02 (0)
  • Re: Boy, are cars gettin' big these days !! - Remy Davison 09:46:04 06/17/02 (0)
• auto/trans rebuild - michael 18:21:08 06/16/02 (2)
  • Another link.... may help - Lars BendOr e12z 00:13:17 06/17/02 (1)
    • Oops. the link - Lars 00:14:29 06/17/02 (0)
• My engine moved???? - Mr. Coffey 17:53:04 06/16/02 (7)
  • Re: My engine moved???? - Peter Florance 11:07:09 06/17/02 (1)
    • Also check your driveshaft . The splines may have - Jefflee 18:02:53 06/17/02 (0)
  • Re: My engine moved???? - Kaveman 23:12:46 06/16/02 (3)
    • Re: My engine moved???? - Mr. Coffey 23:58:49 06/16/02 (2)
      • Re: My engine moved???? - Mike W. 01:34:38 06/18/02 (0)
      • time to replace the mounts - ...tom 07:12:28 06/17/02 (0)
  • Re: My engine moved???? - Steve Kirby 21:58:53 06/16/02 (0)
• ripped out my diff today :>( - ...tom 15:33:42 06/16/02 (4)
  • Re: ripped out my diff today :>( - gfubini 21:47:03 06/16/02 (0)
  • Re: ripped out my diff today :>( - Peter Florance 19:30:14 06/16/02 (0)
  • Actually, thank - Bill Bowes 16:38:18 06/16/02 (1)
    • thanks for advice... - ...tom 17:11:28 06/16/02 (0)
• Has anyone dynoed a 3.3? - Bill Barrett 15:03:07 06/16/02 (3)
  • Re: Has anyone dynoed a 3.3? - Dave Spencer 07:28:48 06/18/02 (0)
  • I seat dyno a 533 every day ! - Peter Claassen 23:44:53 06/17/02 (1)
    • I would certainly disagree with you. I guess I've - Jefflee 20:06:32 06/18/02 (0)
• I met an orig. owner - greghill 15:01:12 06/16/02 (0)
• Turbo & L-Jet - BIGERIK 12:17:52 06/16/02 (2)
  • The possibilities are endeless, as are the - IPM 09:39:45 06/17/02 (0)
  • Re: Turbo & L-Jet - gfubini 21:35:58 06/16/02 (0)
• OT: Happy Dads Day to those of us who - Scott 09:21:58 06/16/02 (4)
  • Yep, fathers day was nice - IPM 09:24:27 06/17/02 (0)
  • Re: OT: Happy Dads Day to those of us who - Greg 08:11:13 06/17/02 (0)
  • Re: OT: Happy Dads Day to those of us who - Mark Phillips 14:11:27 06/16/02 (0)
  • I got you a turbo motor!! When you coming? - TCD 09:36:20 06/16/02 (0)
• where can I get the speedometer that reads to 140 - Mark Dvorak 01:54:55 06/16/02 (3)
  • Re: where can I get the speedometer that reads to 140 - gfubini 22:00:35 06/16/02 (0)
  • I have one.. - Adam V. 10:24:31 06/16/02 (0)
  • Re: where can I get the speedometer that reads to 140 - stewart 08:59:51 06/16/02 (0)
• WTB - Blaupunkt Selector Button - Jeff Ross 00:43:22 06/16/02 (0)
• weekend's progress - Peter Florance 22:08:05 06/15/02 (4)
  • Re: weekend's progress...where to get ss lines? - Bill Barrett 09:54:33 06/16/02 (2)
    • Re: weekend's progress...where to get ss lines? - Peter Florance 12:34:22 06/16/02 (0)
    • Re: weekend's progress...where to get ss lines? - Troy Rudolph 11:41:00 06/16/02 (0)
  • Re: weekend's progress - Kaveman 22:25:02 06/15/02 (0)
• Removing Flywheel & Pressure Plate - Chris 20:32:27 06/15/02 (3)
  • Re: Removing Flywheel & Pressure Plate - Karl 23:07:19 06/15/02 (0)
  • Re: Removing Flywheel & Pressure Plate - gfubini 21:50:00 06/15/02 (0)
  • Impact Wrench - takes it right off !! nt - Jefflee 21:39:37 06/15/02 (0)
• Moving Sale! I have a few e12 items remaining - TCD 16:45:30 06/15/02 (0)
• reuse flywheel bolts? - ...tom 16:24:55 06/15/02 (3)
  • Re: reuse flywheel bolts? - gfubini 21:51:55 06/15/02 (0)
  • Re: reuse flywheel bolts? - Frank H 16:42:01 06/15/02 (1)
    • Re: reuse flywheel bolts? - Kaveman 18:36:32 06/15/02 (0)
• F.S. 528i Parts, Manuals, Fiche Reader, (Long) - Harold 14:38:03 06/15/02 (3)
  • Re: F.S. 528i Parts, Manuals, Fiche Reader, (Long) - Mike Thurman 13:38:11 06/17/02 (0)
  • Re: F.S. 528i Parts, Manuals, Fiche Reader, (Long) - Mike Thurman 13:36:53 06/17/02 (0)
  • Re: F.S. 528i Parts, Manuals, Fiche Reader, (Long) - Jordan Angle 12:03:21 06/16/02 (0)
• Insane project needs / parts available - Adam V. 10:40:14 06/15/02 (4)
  • Re: Clutch line. - Bill Bowes 19:15:25 06/15/02 (0)
  • Re: Insane project needs / parts available - Mike V. 12:47:11 06/15/02 (1)
    • Re: Insane project needs / parts available - Adam V. 19:01:23 06/15/02 (0)
  • rear end - Karl 12:37:50 06/15/02 (0)
• OT: Klez advice? Virus in the computer I think... - Catfish 01:21:34 06/15/02 (10)
  • About Klez - Troy Rudolph (Webmaster) 19:28:19 06/15/02 (1)
    • Nice writeup... Thanks Troy - Lars 19:33:14 06/15/02 (0)
  • Forgot.. Most successful tool so far... free from - Lars BendOr e12z 07:51:45 06/15/02 (0)
  • Been eradicating Klez from client computers>> - Lars BendOr e12z 07:20:01 06/15/02 (3)
    • Thanks..Whew!!!... - Catfish 14:16:37 06/15/02 (0)
    • Re: Been eradicating Klez from client computers>> - Karl 08:38:07 06/15/02 (0)
    • Thanks for the OT - Peter Florance 07:36:45 06/15/02 (0)
  • Re: OT: Klez advice? Virus in the computer I think... - Chuck Denson 06:08:39 06/15/02 (2)
    • important observation - Peter Florance 07:38:43 06/15/02 (1)
      • One more..... - Bill Bowes 19:33:44 06/15/02 (0)
• 528i problem which has stumped me and my mechanics - gfubini 00:01:15 06/15/02 (10)
  • A wild guess or two.. - Frank H 10:34:51 06/15/02 (1)
    • Oh Yes! The hidden crack..now that you mention it. - Lars, BendOr e12s 19:28:38 06/15/02 (0)
  • You Have EXACTLY described a problem - Lars BendOr e12z 09:16:47 06/15/02 (1)
    • sorry - Peter Florance 09:28:54 06/15/02 (0)
  • Re: 528i problem which has stumped me and my mechanics - Karl 08:45:16 06/15/02 (1)
    • How did I ever forget... - Karl 12:44:19 06/15/02 (0)
  • Re: 528i problem which has stumped me and my mechanics - Peter Florance 07:30:27 06/15/02 (3)
    • Re: 528i problem which has stumped me and my mechanics - gfubini 15:29:03 06/15/02 (2)
      • Bosch +4 Good or Bad? - Mark Dvorak 01:43:54 06/16/02 (1)
        • Re: Bosch +4 Good or Bad? - Peter Florance 19:28:50 06/16/02 (0)
• Anybody reading the June Roundel? - Mr. Coffey 21:14:36 06/14/02 (3)
  • Re: Anybody reading the June Roundel? - Mike Thurman 13:51:31 06/17/02 (0)
  • I'm trying to get a hold of e12 racer - Peter Florance 09:40:24 06/15/02 (1)
    • Re: I'm trying to get a hold of e12 racer - Jim Davis 10:11:34 06/15/02 (0)
• uh...dead pedals?? hmmm - Curt Bachmann 20:07:30 06/14/02 (7)
  • Re: uh...dead pedals?? hmmm - Karl 08:51:41 06/15/02 (0)
  • a dead pedal... - Kevin Kew 21:09:26 06/14/02 (5)
    • for me.. - Peter Florance 21:14:47 06/14/02 (4)
      • obviously the most practical use... - Kevin Kew 21:45:06 06/14/02 (0)
      • Peter... - Dave Spencer 21:18:05 06/14/02 (2)
        • Re: Peter... - Peter Florance 07:40:10 06/15/02 (1)
          • Just look for one of those K-Car designs !! nt - Jefflee 10:47:58 06/15/02 (0)
• For all who emailed about the front spoiler - David @ Boyd Motor Werks 18:54:53 06/14/02 (0)
• Do no what wrong with cooling system - Michael 11:47:31 06/14/02 (1)
  • Try bleeding the air out - Peter Florance 16:40:46 06/14/02 (0)
• Anybody have a fuel rail for '80 528i I can buy? - Jim Davis 09:33:34 06/14/02 (1)
  • yes, email me off list - ...tom 09:41:45 06/14/02 (0)
• Dead pedals with floor mat question - Peter Florance 07:03:13 06/14/02 (8)
  • Re: Dead pedals with floor mat question - Bob Iverach 13:31:33 06/14/02 (1)
    • thanks! - Peter Florance 16:00:30 06/14/02 (0)
  • Re: Dead pedals with floor mat question - Jeff C 08:37:11 06/14/02 (0)
  • Dead Pedal? Hmm... My clutch pedal at times>> - Lars BendOr e12z 08:30:16 06/14/02 (0)
  • answer - Steve C. 07:31:22 06/14/02 (2)
    • Re: Pics... - Dave Spencer 21:14:53 06/14/02 (1)
      • thanks Don and question - Peter Florance 21:17:21 06/14/02 (0)
  • are you looking for an answer ? - Kevin Kew 07:25:41 06/14/02 (0)
• "better than factory manual"? on eBay - Peter Florance - First Fives Dictator for life 07:00:32 06/14/02 (4)
  • Version I have does not cover e12 well. - IPM 09:47:08 06/17/02 (0)
  • I have not, but if I win the bid, I will! - JIm Davis 09:25:42 06/14/02 (2)
    • Be Careful - Mishast 12:13:13 06/14/02 (1)
      • Re: Be Careful - Jim Davis 15:04:23 06/14/02 (0)
• wtb hard fuel line piece - Peter Florance 22:15:03 06/13/02 (2)
  • Re: wtb hard fuel line piece - Chuck Denson 05:39:45 06/14/02 (1)
    • Re: wtb hard fuel line piece - Peter Florance 06:21:53 06/14/02 (0)
• fuel injectors - BIGERIK 21:10:16 06/13/02 (0)
• Anyone know if H4 e-code lenses will fit? - JB 21:07:09 06/13/02 (2)
  • Re: Anyone know if H4 e-code lenses will fit? - Troy Rudolph 21:30:39 06/13/02 (1)
    • Thanks Troy! nt - JB 21:37:21 06/13/02 (0)
• 5er Fest show categories and awards...... - Duke - 85 M535i/Hartge 18:11:47 06/13/02 (15)
  • Two Great suggestions! - Scott 07:46:42 06/14/02 (0)
  • Rustiest, but got there. I have a 2002Tii contendor - Lars BendOr e12z 22:00:12 06/13/02 (4)
    • Create a "COSMETICALLY CHALLENGED" category - Mishast 12:14:46 06/14/02 (2)
      • not so fast - Peter Florance 09:15:36 06/15/02 (1)
        • Are you going to Dallas? (nt) - Robert Bondi 13:42:50 06/15/02 (0)
    • Re: Rustiest, but got there. I have a 2002Tii contendor - Dave Spencer 22:48:11 06/13/02 (0)
  • another category : cleanest - Robert Bondi 19:18:46 06/13/02 (8)
    • Cleanest? Duke, Just go ahead and send Bondi the.. - Scott 07:44:39 06/14/02 (7)
      • I would challenge that if... - Eric Q 19:57:00 06/14/02 (3)
        • Re: I would challenge that if... - Robert Bondi 00:06:33 06/15/02 (2)
          • Re: I would challenge that if... - Eric Q 02:43:57 06/15/02 (1)
            • Eric,your # 1 on list - Jeff 18:29:39 06/15/02 (0)
      • Thanks Scott... - Robert Bondi 08:43:38 06/14/02 (2)
        • LOL! Good Then Ill Take the .... - Scott 09:05:46 06/14/02 (1)
          • Re: LOL! Good Then Ill Take the .... - Robert Bondi 09:39:05 06/14/02 (0)
• ebay E12's, one in Delaware! - Adam Wilson 15:27:47 06/13/02 (2)
  • Re: ebay E12's, one in Delaware! - fer 16:21:14 06/13/02 (0)
  • delaware e12 fs on ebay - ...tom 16:16:23 06/13/02 (0)
• I Found the mirror knob... thanks!!! - Fer 14:25:44 06/13/02 (0)
• Adam Wilson - new registry - Robert Bondi 14:21:38 06/13/02 (7)
  • Re: Adam Wilson - new registry - Troy Rudolph (Webmaster) 14:27:47 06/13/02 (6)
    • Re: Adam Wilson - new registry - Adam Wilson 15:10:03 06/13/02 (5)
      • I was thinking - Peter Florance 22:22:55 06/13/02 (1)
        • Re: I was thinking - Troy Rudolph 10:57:58 06/14/02 (0)
      • Re: Adam Wilson - new registry - Troy Rudolph 15:21:41 06/13/02 (2)
        • Re: Adam Wilson - new registry - Adam Wilson 16:04:30 06/13/02 (1)
          • Re: Adam Wilson - new registry - Troy Rudolph 21:18:08 06/13/02 (0)
• euro cluster, minus the coveted tach, FS - Adam Wilson 13:51:38 06/13/02 (1)
  • hey it's easy! - Peter Florance 07:21:54 06/14/02 (0)
• anyone ever seen this hood? - Adam Wilson 13:07:44 06/13/02 (6)
  • Re: anyone ever seen this hood? - Matt B 01:55:07 06/16/02 (0)
  • Re: anyone ever seen this hood? - Randy McCafferty 21:05:17 06/13/02 (2)
    • Re: anyone ever seen this hood? - Troy Rudolph 21:20:07 06/13/02 (1)
      • It's really fast too ;) - Randy M 11:03:26 06/15/02 (0)
  • "Cool" is right! - Troy Rudolph 15:24:26 06/13/02 (0)
  • That is COOL! - Sam R. 14:51:48 06/13/02 (0)
• From 2002tii boards...need advice - Ivan, UK 11:57:24 06/13/02 (24)
  • www.2002restorations.com ---- David - Lars Bend Or e12z 18:56:59 06/13/02 (1)
    • If i remember correctly... - Kevin Kew 19:52:48 06/13/02 (0)
  • Great; I hope Mark can help... - Ivan, UK 12:38:31 06/13/02 (20)
    • i'm looking at the BMW nerds website... - Kevin Kew 13:11:17 06/13/02 (19)
      • this nerdie says my car isn't worth the try!!! - Fer 14:24:35 06/13/02 (18)
        • Re: this nerdie says my car isn't worth the try!!! - Dave Spencer 22:46:44 06/13/02 (0)
        • Re: this nerdie says my car isn't worth the try!!! - Troy Rudolph 21:26:24 06/13/02 (0)
        • Re: this nerdie says my car isn't worth the try!!! - Peter Florance 20:39:24 06/13/02 (0)
        • Re: this nerdie says my car isn't worth the try!!! - Robert Bondi 15:16:28 06/13/02 (13)
          • Re: this nerdie says my car isn't worth the try!!! - fer 16:15:22 06/13/02 (12)
            • thermal reactors - Robert Bondi 19:33:13 06/13/02 (11)
              • Re: thermal reactors ..WHAT??????? - Fer 00:56:52 06/14/02 (10)
                • FAQ? - Robert Bondi 05:07:38 06/14/02 (0)
                • Re: thermal reactors ..WHAT??????? - Fer 01:00:50 06/14/02 (8)
                  • Re: thermal reactors ..WHAT??????? - Robert Bondi 05:05:11 06/14/02 (7)
                    • why can't - Peter Florance 06:23:36 06/14/02 (6)
                      • Re: why can't - fer 11:43:17 06/14/02 (4)
                        • Two questions not yet answered - Robert Bondi 13:59:28 06/14/02 (3)
                          • Re: Two questions... Ok.. let's see....! - fer 14:20:04 06/14/02 (2)
                            • Re: questions about the FAQ - Fer 14:29:41 06/14/02 (1)
                              • Re: questions about the FAQ - Robert Bondi 16:37:47 06/14/02 (0)
                      • Re: why can't - Robert Bondi 08:56:26 06/14/02 (0)
        • Re: this nerdie says my car isn't worth the try!!! - Ivan, UK 14:53:08 06/13/02 (0)
  • Paging Mark Cranswick - Peter Florance 12:25:39 06/13/02 (0)
• Them 520s are plenty fast... - Remy Davison 09:54:56 06/13/02 (3)
  • Re: Them 520s are plenty fast... - Troy Rudolph 11:13:11 06/13/02 (2)
    • Re: Them 520s are plenty fast... - Remy Davison 09:23:08 06/14/02 (0)
    • Re: Them 520s are plenty fast... - Sam Schultz 18:13:34 06/13/02 (0)
• FS: Beige manual/heated comfort seats $125 - TCD 09:10:27 06/13/02 (3)
  • Sold. - TCD 13:28:44 06/13/02 (0)
  • Re: FS: Beige manual/heated comfort seats $125 - Peter Florance 09:43:50 06/13/02 (1)
    • Re: FS: Beige manual/heated comfort seats $125 - TCD 10:06:37 06/13/02 (0)
• Boge Front Struts on Ebay - Jonathan Pecsok 08:47:22 06/13/02 (3)
  • Here's the link.... - Jonathan Pecsok 08:48:31 06/13/02 (2)
    • Boge part # - Peter Florance 09:41:09 06/13/02 (1)
      • I know they're 'Gas', not sure if Turbo or TS..... - Jonathan Pecsok 11:27:16 06/13/02 (0)
• 530i Door lock button? - canada Karl 05:40:36 06/13/02 (2)
  • powers rear window switches - ...tom 05:55:23 06/13/02 (1)
    • Re: powers rear window switches - Remy Davison 09:19:35 06/13/02 (0)
• WTB Front Caliper - Lou 23:01:30 06/12/02 (0)
• Cylinder Pressure - Poorna 22:07:51 06/12/02 (0)
• Bosch dist. # 0 237 302 026? - Bill Barrett 21:14:02 06/12/02 (0)
• Anyone Know a Good Source For.... - Kaveman 19:03:43 06/12/02 (4)
  • Re: Anyone Know a Good Source For.... - Robert Bondi 19:08:20 06/12/02 (3)
    • trying again - Robert Bondi 19:11:02 06/12/02 (2)
      • I checked with the mechanical engineers at work... - Dave Spencer 21:51:09 06/12/02 (0)
      • Re: trying again - Kaveman 20:09:47 06/12/02 (0)
• E28 Gong in an E12... Thanks Don D.... - Kaveman 18:58:28 06/12/02 (1)
  • Buzzer.. what buzzer? That's the thing I broke - Frank H 20:07:10 06/12/02 (0)
• Rising temp... - Dave Spencer 15:50:33 06/12/02 (2)
  • Re: Rising temp... - Kaveman 18:44:24 06/12/02 (1)
    • 91C switch better be good... - Dave Spencer 08:27:36 06/13/02 (0)
• Hardy and Beck Front spoiler for sale - David @ Boyd Motor Werks 15:33:13 06/12/02 (0)
• Hood Bolt - Medfly 12:12:42 06/12/02 (1)
  • Re: Hood Bolt - I have a spare - Peter Claassen 23:53:51 06/17/02 (0)
• Tire Size - Tara Knowles 09:43:45 06/12/02 (4)
  • Re: Tire Size - Ryan Bryan 05:33:31 06/13/02 (0)
  • Re: Tire Size - Troy Rudolph 13:04:12 06/12/02 (2)
    • You might be able too... - Eric Q 02:48:37 06/15/02 (0)
    • Re: Tire Size - Jimmie 08:28:06 06/13/02 (0)
• Shop needed for 2002 e46 in Renton WA. (more) - Sam Schultz 09:42:13 06/12/02 (0)
• 5er FEST RAFFLE --- MM 3.7 Stroker, tickets $57 ea - Duke - 85 M535i/Hartge 09:41:16 06/12/02 (0)
• Mirror Knob for '76 530i... help - Fer 09:25:27 06/12/02 (28)
  • speaking of passenger side mirrors - Peter Florance 21:25:55 06/12/02 (1)
    • Re: speaking of passenger side mirrors - Dave Spencer 21:48:43 06/12/02 (0)
  • Mirror Switch summary - Robert Bondi 14:36:40 06/12/02 (16)
    • Re: Mirror Switch summary - Don Daynes 15:00:47 06/12/02 (15)
      • Re: Mirror Switch summary - Robert Bondi 15:15:57 06/12/02 (14)
        • Re: Mirror Switch summary - Don Daynes 15:38:47 06/12/02 (13)
          • Re: Mirror Switch summary - Robert Bondi 15:49:18 06/12/02 (0)
          • I hear Peter has a saw... - Dave Spencer 15:48:32 06/12/02 (11)
            • no, oxy acetylene - Peter Floranceq 19:28:02 06/12/02 (0)
            • drill - Robert Bondi 15:53:54 06/12/02 (9)
              • So its Official... we can't get the original knob? - fer 16:29:48 06/12/02 (8)
                • Re: So its Official... we can't get the original knob? - Bob Iverach 19:17:52 06/12/02 (0)
                • Re: So its Official... we can't get the original knob? - Robert Bondi 17:08:52 06/12/02 (6)
                  • Here is the picture.... - Fer 00:26:59 06/13/02 (4)
                    • there is something missing - Robert Bondi 06:10:53 06/13/02 (3)
                      • where to get it...?????? - Fer 08:56:07 06/13/02 (2)
                        • Check your email... - Dave Spencer 09:43:35 06/13/02 (0)
                        • part numbers ; 1 is NLA - Robert Bondi 09:28:33 06/13/02 (0)
                  • Here is the picture.... - Fer 00:26:19 06/13/02 (0)
  • Re: Mirror Knob for '76 530i... help - Robert Bondi 09:34:00 06/12/02 (8)
    • Re: Mirror Knob for '76 530i... help - Peter florance 11:34:23 06/12/02 (1)
      • Re: Mirror Knob for '76 530i... help - Dave Spencer 13:08:11 06/12/02 (0)
    • Re: Mirror Knob for '76 530i... help - Fer 11:29:38 06/12/02 (5)
      • Re: Mirror Knob for '76 530i...mine is diferent - Fer 13:26:29 06/12/02 (4)
        • Mine doesn't have the other side either - Peter Florance 13:32:25 06/12/02 (3)
          • Re: Mine doesn't have the other side either - Don Daynes 13:53:49 06/12/02 (0)
          • Mine is single as well... - Dave Spencer 13:37:01 06/12/02 (1)
            • Correction... - Dave Spencer 13:53:19 06/12/02 (0)
• White Paint Color - 1981 ??? - Alan A 08:52:28 06/12/02 (9)
  • Additional Help Requested..... - Alan A 13:18:17 06/12/02 (3)
    • Re: Additional Help Requested..... - Troy Rudolph 18:39:42 06/12/02 (0)
    • white E12 M535i - Adam Wilson 15:19:39 06/12/02 (1)
      • this pic is probably what you're looking for (nt) - Adam Wilson 15:22:45 06/12/02 (0)
  • Re: White Paint Color - 1981 ??? - Gabe 13:08:36 06/12/02 (0)
  • Re: White Paint Color - 1981 ??? - Troy Rudolph 13:08:26 06/12/02 (0)
  • Re: White Paint Color - 1981 ??? - Marc 13:00:11 06/12/02 (2)
    • Re: White Paint Color - 1981 ??? - Alan A 13:11:21 06/12/02 (1)
      • Mystery Solved..... - Alan A 16:34:43 06/12/02 (0)
• Door R&R? - Peter Florance 07:57:49 06/12/02 (4)
  • LOVE RED GREEN>> BUT have my own way.... - Lars Bend OR e12z 19:46:44 06/12/02 (0)
  • The Red Green Method - Jim Davis 10:54:48 06/12/02 (0)
  • removal - ...tom 09:45:37 06/12/02 (1)
    • Try some pieces of 4x4 wood (nt) - Kevin Kew 15:37:33 06/12/02 (0)
• Metric Mechanic Stroker M30 Raffle.......... - Duke - 85 M535i/Hartge 20:18:17 06/11/02 (3)
  • $20 - Troy Rudolph 12:54:53 06/12/02 (0)
  • Thats a good question... - Scott 22:00:57 06/11/02 (1)
    • Wrong, Turbo is next!!! - TCD 07:10:41 06/12/02 (0)
• FREE set of White DOORS - Chris 14:01:08 06/11/02 (0)
• '78 530i -- For Sale -- - Martyn Smith 13:19:23 06/11/02 (0)
• Help --1979 528i, whats wrong? - CelicaGT 13:04:01 06/11/02 (2)
  • Re: Help --1979 528i, whats wrong? - Troy Rudolph 13:15:32 06/11/02 (1)
    • Re: Help --1979 528i, whats wrong? - CelicaGT 22:24:29 06/12/02 (0)
• down for long - raymon 12:49:38 06/11/02 (2)
  • Re: down for long - Troy Rudolph 13:14:20 06/11/02 (0)
  • Re: down for long - Peter Florance 12:57:21 06/11/02 (0)
• Idler Arms - Tara Knowles 12:10:09 06/11/02 (10)
  • Other big wander Item.. Center link.. About $70 - Lars Bend Or e12z 19:50:29 06/12/02 (0)
  • I suspect - Peter Florance 07:06:10 06/12/02 (0)
  • Re: Idler Arms - Kaveman 20:59:25 06/11/02 (0)
  • Re: Idler Arms - Troy Rudolph 15:24:54 06/11/02 (0)
  • Agree w/others. Would take a heck of a whack>>> - Lars BendOr e12z 14:25:49 06/11/02 (3)
    • Agree again... - Eric Q 00:11:22 06/12/02 (1)
      • P.S. - Eric Q 00:12:52 06/12/02 (0)
    • Re: Agree w/others. Would take a heck of a whack>>> - Tara Knowles 15:13:23 06/11/02 (0)
  • Re: Idler Arms - Peter Florance 12:53:24 06/11/02 (0)
  • Re: Idler Arms - greghill 12:40:54 06/11/02 (0)
• European E12 brochure pictures - Adam Wilson 10:38:15 06/11/02 (9)
  • E12 Owner's manual - Remy Davison 09:02:23 06/12/02 (3)
    • Re: E12 Owner's manual - Dave Spencer 10:09:26 06/12/02 (2)
      • Re: E12 Owner's manual - Remy Davison 09:16:16 06/13/02 (1)
        • Re: E12 Owner's manual - Dave Spencer 09:45:07 06/13/02 (0)
  • Re: European E12 brochure pictures - Sam Schultz 21:41:30 06/11/02 (0)
  • Re: European E12 brochure pictures - Troy Rudolph 12:42:42 06/11/02 (3)
    • Re: European E12 brochure pictures - Adam Wilson 12:45:47 06/11/02 (2)
      • Re: European E12 brochure pictures - Troy Rudolph 13:09:51 06/11/02 (1)
        • Re: European E12 brochure pictures - Christian Fritze 17:12:06 06/11/02 (0)
• original radios for e12?...confused - Fer 09:16:55 06/11/02 (3)
  • Re: original radios for e12?...confused - Jordan Angle 13:31:28 06/11/02 (0)
  • Re: original radios for e12?...confused - Troy Rudolph 12:44:12 06/11/02 (1)
    • The same was in my car... (nt) - Dave Spencer 13:18:06 06/11/02 (0)
• cleaning out the garage - Kevin Rowley 08:28:27 06/11/02 (0)
• Which e23 brakes are an upgrade? - TCD 07:44:00 06/11/02 (3)
  • Free: Pair of 1982 745 rear rotors. - TCD 13:04:28 06/11/02 (0)
  • Re: Which e23 brakes are an upgrade? - Troy Rudolph 12:34:51 06/11/02 (0)
  • Re: Which e23 brakes are an upgrade? - Jim Hineline 12:23:33 06/11/02 (0)
• LEGALLY REACH 216,000,000 CUSTOMERS EVERY MONTH AN - marketing@yahoo.com 03:04:09 06/11/02 (5)
  • I think I REACHED THEM hehe - Curt Bachmann 00:16:33 06/12/02 (2)
    • Please, let me.. - Peter Florance - First Fives Dictator for life 07:10:43 06/12/02 (1)
      • Ok, its all yours,............. - Curt Bachmann 11:24:33 06/12/02 (0)
  • complaints sent (nt) - Peter Florance - First Fives Dictator for life 06:27:22 06/11/02 (1)
    • Peter, Isnt it the same poster everytime? - Tim In NJ 07:41:53 06/11/02 (0)
• LEGALLY REACH 216,000,000 CUSTOMERS EVERY MONTH AN - marketing@yahoo.com 03:04:05 06/11/02 (1)
  • complaints sent (nt) - Peter Florance - First Fives Dictator for life 06:26:44 06/11/02 (0)
• Glove Box Latch - Jim Davis 22:42:21 06/10/02 (1)
  • Re: Glove Box Latch - Mark Phillips 11:51:53 06/11/02 (0)
• Distributor vacuum lines, which port? - Peter Zoliski 20:43:47 06/10/02 (5)
  • Re: I have a 79 dist. and.... - Blair 01:42:26 06/11/02 (0)
  • Re: Distributor vacuum lines, which port? - Lance Lattrulo 22:59:53 06/10/02 (0)
  • Re: Distributor vacuum lines, which port? - Robert Bondi 20:59:44 06/10/02 (2)
    • Re: Distributor vacuum lines, which port? - Peter Zoliski 23:05:53 06/10/02 (1)
      • Re: Distributor vacuum lines, which port? - Peter Florance 06:30:26 06/11/02 (0)
• Deal on Hartge Wheels - Eric Q 18:46:02 06/10/02 (16)
  • Re: Deal on Hartge Wheels - Eddie Ribeiro 10:19:07 06/11/02 (1)
    • So you basically put 4 fronts on the car. Cool.. - Tim in NJ 11:19:33 06/11/02 (0)
  • So that makes $1370 for a set of wheels delivered - Frank H 20:28:38 06/10/02 (9)
    • TWO sets of wheels - Eric Q 20:42:37 06/10/02 (7)
      • Sorry my mistake.. - Frank H 22:00:06 06/10/02 (0)
      • Yes, You have to pay Uncle Sam 2.5% MORE - Tim In NJ 20:51:03 06/10/02 (5)
        • 225 and 245 too big for an E12... - Eric Q 00:53:20 06/11/02 (3)
          • 245s work! - Sam R. 09:36:55 06/11/02 (2)
            • Re: 245s work! - Troy Rudolph 12:56:28 06/11/02 (1)
              • Re: 245s work! - Sam R. 15:24:48 06/11/02 (0)
        • Re: Yes, You have to pay Uncle Sam 2.5% MORE - Frank H 21:58:06 06/10/02 (0)
    • Re: So that makes $1370 for a set of wheels delivered - Mr. Coffey 20:31:43 06/10/02 (0)
  • This deal has been on for 4 Months or More.. --> - Tim In NJ 20:09:59 06/10/02 (1)
    • Hadn't heard about it until yesterday... - Eric Q 20:46:27 06/10/02 (0)
  • Link to wheels (Hartge) - billy 19:18:14 06/10/02 (0)
  • Link to wheels (Hartge) - billy 19:17:06 06/10/02 (0)
• 3speed to 4 speed auto - Alesandro Corsodoro 18:38:55 06/10/02 (3)
  • Not as good a tranny as the 3 speed.....??? - Lars BendOr e12z 18:47:50 06/10/02 (2)
    • Re: Not as good a tranny as the 3 speed.....??? - michael 11:36:30 06/11/02 (0)
    • Re: thank you - alesandro corsodoro 19:29:04 06/10/02 (0)
• Boge Turbo Gas rear shocks - David at Boyd Motor Werks 13:08:21 06/10/02 (0)
• Bumper shock..... - Curt Bachmann 12:34:08 06/10/02 (3)
  • Re: Bumper shock..... - David at Boyd Motor Werks 13:09:49 06/10/02 (2)
    • Re: Where should I drill at? - Curt Bachmann 13:35:34 06/10/02 (1)
      • Re: Where should I drill at? - David at Boyd Motor Werks 14:05:42 06/10/02 (0)
• Alternator Install on '79 528i (NEED HELP) - Jordan Angle 12:30:33 06/10/02 (8)
  • Re: Alternator Install on '79 528i (NEED HELP) - Peter Claassen 20:35:52 06/10/02 (1)
    • Re: I'll skip the detailed email... - Dave Spencer 21:10:40 06/10/02 (0)
  • Re: Alternator Install on '79 528i (NEED HELP) - Alesandro Corsodoro 18:47:05 06/10/02 (0)
  • Find a good local Automotive Electric Shop - Lars BendOr.... e12z 12:42:41 06/10/02 (4)
    • Use the money you save from the rebuild to , , , - Jefflee 12:57:27 06/10/02 (3)
      • Re: Use the money you save from the rebuild to , , , - Jordan Angle 18:25:57 06/10/02 (2)
        • I'll see if I can get you the procedure in detail - Dave Spencer 18:40:25 06/10/02 (1)
          • And don't forget to disconnect the battery first - Steve 20:15:49 06/10/02 (0)
• Hood Re-install - Sam R. 10:31:47 06/10/02 (3)
  • Re: Hood Re-install - Robert Bondi 13:39:34 06/10/02 (0)
  • Sam , , I tried to put a hood on by myself with - Jefflee 13:05:01 06/10/02 (1)
    • broken/beaten 5 - Sam R. 13:20:20 06/10/02 (0)
• Roundel column, Satch's column, with E12 picture - Adam Wilson 09:52:55 06/10/02 (1)
  • Never heard of him but... - Peter Florance 20:07:31 06/10/02 (0)
• 530i Stereo wanted.... where can i find.... - fer 09:37:51 06/10/02 (1)
  • Re: 530i Stereo wanted.... where can i find.... - Curt Bachmann 13:50:34 06/10/02 (0)
• Found cool book today - Don Daynes 01:07:34 06/10/02 (0)
• Sunday Project(Short U.S.Bumpers) - Mark Phillips 21:53:37 06/09/02 (7)
  • Re: How? - Blair 11:35:00 06/10/02 (1)
    • Re: How? - Mark Phillips 14:55:46 06/10/02 (0)
  • Re: Sunday Project(Short U.S.Bumpers) - Mark Phillips 09:48:52 06/10/02 (0)
  • ? for you and wtb - Peter Floranceq 05:56:17 06/10/02 (1)
    • bumper shock - Steve C. 09:51:39 06/10/02 (0)
  • How about some before/after photos? - Mr. Coffey 00:09:52 06/10/02 (0)
  • Sounds sweet, are you going to at 5'r fest?? - Scott 21:58:03 06/09/02 (0)
• How easy is it to pull off a brake master cyl? nt - MacGillacuddy 20:56:01 06/09/02 (1)
  • Easier than you think... - Scott 22:01:22 06/09/02 (0)
• would e34 rear seats fit? - Curt Bachmann 19:44:40 06/09/02 (3)
  • april 2002 COTM(NT) - Kevin Kew 21:46:44 06/09/02 (1)
    • eh.. you want rear... sorry... - Kevin Kew 21:48:09 06/09/02 (0)
  • Re: would e34 rear seats fit? - Chuck Denson 21:31:14 06/09/02 (0)
• M535i subframe bushing 31.13.2.202.395 - Peter Florance 19:05:47 06/09/02 (0)
• Coolant / July Car and Driver - Jim 18:03:31 06/09/02 (11)
  • I read an article recently... - Frank H 20:46:05 06/10/02 (1)
    • anodes - Robert Bondi 22:39:01 06/10/02 (0)
  • I run almost 100% water... - Scott 22:08:51 06/09/02 (8)
    • So what is Lubricating your water pump? Corrosion? - Tim in NJ 08:29:33 06/10/02 (4)
      • Re: So what is Lubricating your water pump? Corrosion? - Jim 20:21:29 06/10/02 (3)
        • All I know is that out of all the BMWs I have --> - Tim in NJ 20:59:01 06/10/02 (2)
          • Re: All I know is that out of all the BMWs I have --> - Jim 20:51:24 06/11/02 (0)
          • Re: All I know is that out of all the BMWs I have --> - Peter Florance 06:46:03 06/11/02 (0)
    • 8 blade - Robert Bondi 07:44:05 06/10/02 (0)
    • what about corrosion? (NT) - greghill 22:46:12 06/09/02 (0)
    • what about corrosion?