Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XXVI

(2002/11/25 - 2003/01/20)

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• Wanted e12 - Jack 10:28:55 01/20/03 (1)
  • Good Luck ??? - JoeBlow 11:17:47 01/20/03 (0)
• alignment issues... again! - Chris Hollis, Huntsville, AL 10:21:46 01/20/03 (0)
• New wheel pics - Brian in Abilene 08:40:57 01/20/03 (0)
• ebay.de strutbrace worldside shipping - james 05:34:17 01/20/03 (0)
• Extreme E12 resto pics - Al from Oz. 23:30:51 01/19/03 (2)
  • Re: Extreme E12 resto pics - karl sisson 07:36:22 01/20/03 (0)
  • URL here - Al from Oz 23:33:13 01/19/03 (0)
• WTB--forwarded to me - Karl 22:05:24 01/19/03 (0)
• WWOOOOOO HOOOOOOO!!! - Andrew 18:02:17 01/19/03 (4)
  • Was going to suggest battery... - Remy Davison 07:24:35 01/20/03 (0)
  • Re: WWOOOOOO HOOOOOOO!!! - Al from Oz 00:11:12 01/20/03 (0)
  • Re: WWOOOOOO HOOOOOOO!!! - Matt C 21:05:22 01/19/03 (1)
    • Re: always good to see another E12 running....NT - blair 01:07:06 01/20/03 (0)
• I have sinnned...I just brought home two Bavaria's - Frank H 17:48:19 01/19/03 (6)
  • They have their point, but - Mike W. 20:23:48 01/19/03 (0)
  • How about.... - Wietse 20:04:35 01/19/03 (0)
  • Punishment for "BAD" already meted out today.... - Lars Bend Or 18:15:35 01/19/03 (3)
    • Hey, watch it, buddy. I'm from Conestoga, Pa and - Jefflee 20:13:22 01/19/03 (0)
    • Can I go to her room too? - Frank H 18:41:19 01/19/03 (1)
      • GETTT in line. Heck, Im thinking about being bad. - lars 21:48:44 01/19/03 (0)
• Attaching Emblems???? - Blair 15:13:37 01/19/03 (3)
  • Clear Silicone work.s well. NT - Misha 12:04:10 01/20/03 (0)
  • the e28 emblems used double sided tape, - ...tom 17:31:21 01/19/03 (1)
    • Re: the e28 emblems used double sided tape, - karl sisson 17:34:08 01/19/03 (0)
• AFM & STEEL WHEELS FOR SALE - FRANK SWIFT 15:13:05 01/19/03 (0)
• Zender side skirts/front stress bar/limited slip f - Random-535is 11:18:05 01/19/03 (1)
  • Re: Zender side skirts/front stress bar/limited slip f - Andrew 17:54:41 01/19/03 (0)
• Forgive me FIVER's for I have sinned..... - Matt C 10:54:48 01/19/03 (9)
  • Bad Matt! Severe Punishment Awaits. - Lars Bend Or 11:59:10 01/19/03 (8)
    • did you really take that picture? - Chuck NC 00:28:38 01/20/03 (1)
      • Nope.. it was e-mailed to me...Do you think I - Lars 12:27:46 01/20/03 (0)
    • Lars!!!! - Tulsa Dave 14:02:47 01/19/03 (5)
      • NO! ME! ive been badder! - mikey 14:46:01 01/19/03 (4)
        • Re: NO! ME! ive been badder! - Matt C 21:11:29 01/19/03 (3)
          • all but Atttu! - mikey 00:01:38 01/20/03 (0)
          • Re: NO! ME! ive been badder! - Jim Davis 22:09:42 01/19/03 (1)
            • Re: NO! ME! ive been badder! - Matt C 09:00:23 01/20/03 (0)
• 81 528i - Canadian Bimmer 09:52:00 01/19/03 (0)
• Thanks Robert!...but what have you done??? - karl sisson 08:31:24 01/19/03 (0)
• Model Designation - karl sisson 21:49:34 01/18/03 (3)
  • Re: Model Designation - Robert Holly 22:13:51 01/18/03 (2)
    • Re: Model Designation - Robert Holly 22:14:32 01/18/03 (1)
      • Isn't available ?????????????? nt - Jefflee 09:25:15 01/19/03 (0)
• Brake Upgrades - JR --- 1978 635CSi 17:27:32 01/18/03 (15)
  • Re: Here we go again...... - Bill Bowes 12:12:59 01/19/03 (5)
    • Here! Here! Right on the money NT - Misha 12:08:18 01/20/03 (0)
    • more cooling - Peter Florance 06:01:53 01/20/03 (0)
    • Listen to Bill... - Eric Q 23:17:50 01/19/03 (0)
    • experience - Karl 22:31:31 01/19/03 (0)
    • Bill is right.... - Wietse 20:00:15 01/19/03 (0)
  • Re: Brake Upgrades - Troy Rudolph 11:29:59 01/19/03 (0)
  • Reason for upgrades - JR --- 1978 635CSi 09:35:02 01/19/03 (1)
    • when you say stopping power.. - Peter Florance 17:37:56 01/19/03 (0)
  • Bigger diameter master cylinder - Remy Davison 08:17:13 01/19/03 (0)
  • Re: Brake Upgrades - Peter Florance 19:46:40 01/18/03 (2)
    • Re: Brake Upgrades - JR --- 1978 635CSi 09:50:23 01/19/03 (1)
      • The early sixer is better than e28 variant by far - Lars Bend Or 10:19:06 01/19/03 (0)
  • Re: Brake Upgrades - ChuckNC 19:39:43 01/18/03 (0)
  • Re: Brake Upgrades- (relatively)cheap route - Brian in Mtl. 19:34:49 01/18/03 (0)
• M5 engine on EBay in CDN $$$ - Brian in Montreal 17:02:48 01/18/03 (2)
  • Re: M5 engine on EBay in CDN $$$ - Jim 11:48:24 01/19/03 (1)
    • Even then, , , It's expensive for parts !~~! nt - Jefflee 20:19:36 01/19/03 (0)
• car for sale - greghill-phx,az 16:27:15 01/18/03 (0)
• bilstein HD install problem - Robert Purington 14:56:37 01/18/03 (3)
  • Re: bilstein HD install problem - Cristian In Sydney-Oz 14:21:26 01/19/03 (0)
  • what are the numbers on the strut? - ...tom 19:20:16 01/18/03 (1)
    • info appreciated - Robert Purington 17:30:58 01/19/03 (0)
• Clutch Type? - Eddie (Toronto, Ont., Canada) 09:56:12 01/18/03 (5)
  • Thanks for everyone’s input (nt) - Eddie (Toronto, Ont., Canada) 22:11:24 01/19/03 (0)
  • Re: Clutch Type? - Frank H 14:50:49 01/18/03 (1)
    • I looked at the sport clutch for my Euro-3.5L w/ - Jefflee 21:26:08 01/18/03 (0)
  • No question about it... - Tulsa Dave 10:44:32 01/18/03 (1)
    • And should include , , , , , , - Jefflee 11:24:13 01/18/03 (0)
• 524 td ecu - keith martin 00:48:02 01/18/03 (1)
  • Re: 524 td ecu - Scott 09:09:19 01/18/03 (0)
• Clutch update - Peter Florance 21:28:59 01/17/03 (2)
  • Glad I could help, Did they say what Caused it?? - Scott 09:04:08 01/18/03 (1)
    • Re: Glad I could help, Did they say what Caused it?? - Peter Florance 16:15:31 01/18/03 (0)
• Windshield washer nozzle and fan dial don't work - Allen 14:05:29 01/17/03 (7)
  • Re: Windshield washer nozzle doesn't work, , ,, - Jefflee 23:00:39 01/17/03 (1)
    • Re: Windshield washer nozzle doesn't work, , ,, - Robert Bondi 17:04:26 01/18/03 (0)
  • fan dial repair - ...tom 16:18:32 01/17/03 (4)
    • Ahhhhhh.... - Tulsa Dave 18:52:30 01/17/03 (3)
      • Re: Ahhhhhh.... - ChuckNC 19:13:16 01/17/03 (2)
        • Re: Ahhhhhh....(ot) - Lenny D. 20:14:20 01/17/03 (1)
          • Re: Ahhhhhh....(ot) - Karl 22:44:05 01/19/03 (0)
• parts interchange question re: E24 3.5 head - billy in SLO 12:28:32 01/17/03 (10)
  • Any M30 head will fit any M30 block. - Troy Rudolph 12:49:50 01/17/03 (9)
    • Hold the press.... - Wietse Wullink 16:55:36 01/17/03 (7)
      • Re: Hold the press.... - Don Daynes 20:21:22 01/17/03 (0)
      • Re: Hold the press.... - Frank H 19:46:46 01/17/03 (2)
        • Opps, Don and Frank are right. - Wietse 20:36:51 01/17/03 (0)
        • Re: Hold the press.... - Don Daynes 20:06:10 01/17/03 (0)
      • one of us made a type-o, I meant E24 not E34 - billy 18:17:59 01/17/03 (0)
      • one of us made a type-o, I meant E24 not E34 - billy 18:17:53 01/17/03 (1)
        • oops - billy in SLO 18:19:12 01/17/03 (0)
    • thankyou very much. nt - billy in SLO 13:30:00 01/17/03 (0)
• Euro 2.8 - Ken 22:53:54 01/16/03 (0)
• 75 528 - Nath 22:00:57 01/16/03 (1)
  • Re: 75 528 - Blair 02:11:03 01/17/03 (0)
• My E12 - Unknown 21:23:52 01/16/03 (2)
  • Congratulations, great-looking car. - Remy Davison 07:51:14 01/17/03 (0)
  • Re: My E12 - ChuckNC 22:09:48 01/16/03 (0)
• 3.5 swap with L-Jet - T-Raz 20:28:53 01/16/03 (6)
  • Re: 3.5 swap with L-Jet - Karl 22:55:14 01/19/03 (0)
  • Just to fill in - Lars Bend Or 05:23:32 01/17/03 (0)
  • Re: 3.5 swap with L-Jet - Kaveman 20:56:46 01/16/03 (2)
    • Source for distro nut? - T-Raz 22:21:30 01/16/03 (1)
      • Re: Source for distro nut? - Peter Florance 05:58:21 01/17/03 (0)
  • Re: 3.5 swap with L-Jet - Peter Florance 20:56:43 01/16/03 (0)
• Barrett Jackson auction O/T - Jim 20:21:49 01/16/03 (0)
• Exhaust options/availability for E12 6er - Bob 19:37:35 01/16/03 (2)
  • Re: Exhaust options/availability for E12 6er - Kristopher Barrett 12:23:36 01/17/03 (1)
    • I agree... - billy in SLO 14:35:46 01/17/03 (0)
• need advice please - billy in SLO 17:17:37 01/16/03 (2)
  • is the head assembled and ready to go? - ...tom 17:43:19 01/16/03 (1)
    • yes, it is ready to bolt on and go... - billy in SLO 18:16:58 01/16/03 (0)
• Ray-Ban - J 14:16:07 01/16/03 (2)
  • Re: Ray-Ban - Kristopher Barrett 17:08:42 01/16/03 (0)
  • Re: Ray-Ban - Kristopher Barrett 17:06:23 01/16/03 (0)
• Looking for dash shell. Anyone? Also interior phot - Jeff C 14:14:20 01/16/03 (13)
  • Re: Looking for dash shell. Anyone? Also interior phot - Troy Rudolph 18:17:29 01/16/03 (0)
  • One on ebay right now with less than a day left... - Tulsa Dave 15:35:02 01/16/03 (9)
    • Shhhhhh - Jeff C 17:32:45 01/16/03 (0)
    • Re: One on ebay right now with less than a day left... - Matt C 16:51:50 01/16/03 (7)
      • Big Dorky Vents... - Tulsa Dave 17:57:08 01/16/03 (6)
        • central plastic moulding air con pod w/ moveable.. - Don Daynes 00:12:08 01/17/03 (0)
        • I'm pretty sure it's a bolt up - Mike W. 00:02:44 01/17/03 (0)
        • Re: Big Dorky Vents... - Matt C 20:37:46 01/16/03 (0)
        • Re: Big Dorky Vents... - Phil M 19:03:36 01/16/03 (2)
          • Re: Big Dorky Vents... - Blair 20:06:01 01/16/03 (1)
            • My '79 has the flat panel , , , , - Jefflee 22:26:27 01/16/03 (0)
  • Re: Looking for dash shell. Anyone? Also interior phot - Ken 14:52:36 01/16/03 (1)
    • They don't list one for the e12... - Tulsa Dave 15:32:08 01/16/03 (0)
• Euro 2.8 engine for sale cheap - BillW in STL 13:54:16 01/16/03 (3)
  • What's Cheap ??? More info !! nt - Jefflee 18:52:23 01/16/03 (2)
    • A good useable head should be worth $400 - BillW 14:35:44 01/17/03 (1)
      • Re: A good useable head should be worth $400 - Tom in MO 14:52:56 01/17/03 (0)
• Engine heating and & Oil - andres 13:24:30 01/16/03 (4)
  • What kind of oil does it have in it? - Mike W. 23:21:14 01/16/03 (0)
  • Re: Engine heating and & Oil - Tim G in Central NJ 14:25:22 01/16/03 (2)
    • Re: Engine heating and & Oil - Blair 20:01:59 01/16/03 (1)
      • Re: Engine heating and & Oil - pumpkin 21:44:47 01/19/03 (0)
• An E12 2.0 litre ''75 520i for a mere $US250... - Remy Davison 07:49:42 01/16/03 (4)
  • Sorry, messed up. Here's the pic link - Remy Davison 08:14:58 01/16/03 (3)
    • Re: Sorry, messed up. Here's the pic link - Jim 08:38:48 01/16/03 (2)
      • Yep, 520i has 2002i engine - Remy Davson 07:39:14 01/17/03 (0)
      • Re: Sorry, messed up. Here's the pic link - Andrew 20:52:07 01/16/03 (0)
• Side Trim - Paul Goodfellow 21:25:26 01/15/03 (2)
  • Re: Side Trim - DErek 09:37:42 01/16/03 (0)
  • Re: sounds like a dealer only part...... NT - Blair 21:39:38 01/15/03 (0)
• Rebuilt 3.5 on ebay - Jim 21:19:21 01/15/03 (0)
• 79 BMW 320 6cyl Euro???? - karl sisson 18:26:44 01/15/03 (7)
  • Re: 79 BMW 320 6cyl Euro???? - Troy Rudolph 22:50:02 01/15/03 (2)
    • What years were the later 323's? nt. - karl sisson 05:20:46 01/16/03 (1)
      • Re: What years were the later 323's? nt. - Remy Davison 08:56:36 01/16/03 (0)
  • Re: 79 BMW 320 6cyl Euro???? - Frank H 18:44:14 01/15/03 (3)
    • Re: 79 BMW 320 6cyl Euro???? - karl sisson 19:47:18 01/15/03 (2)
      • Re: 79 BMW 320 6cyl Euro???? - Blair 21:38:33 01/15/03 (1)
        • Re: 79 BMW 320 6cyl Euro???? - karl sisson 22:05:42 01/15/03 (0)
• Not long now... - ckn 15:38:16 01/15/03 (3)
  • Re: 75 528? - Blair 16:32:17 01/15/03 (1)
    • Re: 75 528? - Remy Davison 08:23:36 01/16/03 (0)
  • where my pictures? - ckn 15:39:48 01/15/03 (0)
• Anyone planning head work... - Tom in MO 14:31:47 01/15/03 (0)
• Auxiliary Air Valve - Todd 77630CSI 14:24:30 01/15/03 (6)
  • It's not the aux air valve - Mike W. 00:18:09 01/16/03 (5)
    • ...and... - Lenny D. 15:18:09 01/16/03 (4)
      • how did you... - Peter Florance 21:27:45 01/16/03 (3)
        • no, but... - Lenny D. 00:38:40 01/17/03 (2)
          • Re: no, but... - Peter Florance 17:33:09 01/17/03 (1)
            • maybe try... - Lenny D. 18:17:18 01/17/03 (0)
• Lars, did you receive my email? - billy in SLO 11:45:48 01/15/03 (2)
  • I did.... I'll have it looked at.. I'm just>> - Lars 19:01:01 01/15/03 (1)
    • thanks and a question for the board - billy in SLO 20:40:39 01/15/03 (0)
• Distinguishing between Euro and US M30 Block.... - Misha 11:15:54 01/15/03 (9)
  • Re: Distinguishing between Euro and US M30 Block.... - Troy Rudolph 12:12:21 01/15/03 (8)
    • Yes !! The reputed "L" is printed on the left , , - Jefflee 13:32:42 01/15/03 (1)
      • Re: Yes !! The reputed "L" is printed on the left , , - Bill Barrett 00:16:45 01/16/03 (0)
    • other euro models have 3430cc 218 hp engines - ...tom 13:00:31 01/15/03 (5)
      • Lots of Euros had it - Troy Rudolph 14:11:38 01/15/03 (4)
        • Are you saying there was a US M535i? - Frank H 14:48:49 01/15/03 (3)
          • Yes - Troy Rudolph 15:08:13 01/15/03 (2)
            • gray market - Peter Florance 15:54:04 01/15/03 (1)
              • Yes, gray market, but most euros were 218HP - Mike W. 00:30:11 01/16/03 (0)
• Hey Jeff C. - Tom in MO 10:34:49 01/15/03 (1)
  • Yes - Jeff C 12:36:32 01/15/03 (0)
• O/T VA Snowed in - Jeff C 08:33:35 01/15/03 (7)
  • Re: O/T VA Snowed in... Snow... What's Snow? - Kaveman 17:00:38 01/15/03 (1)
    • Hope I get the springs to you in time... - Tulsa Dave 18:02:05 01/15/03 (0)
  • you do know when it snows your 4wd wont start - Sam Schultz 15:27:36 01/15/03 (1)
    • It's actually a WVa Jeep - Jeff C 18:28:37 01/15/03 (0)
  • Waiting for it to start falling here... - Tulsa Dave 09:05:34 01/15/03 (2)
    • We're even getting 'flurries' in Atlanta , , , , , - Jefflee 09:12:21 01/15/03 (0)
    • Re: Waiting for it to start falling here... - Tom in MO 09:09:56 01/15/03 (0)
• power - tom 07:18:06 01/15/03 (2)
  • chicks dig it - greghill-phx,az 10:37:15 01/15/03 (1)
    • Re: chicks dig it - tom 02:19:09 01/16/03 (0)
• AFM - Dan Lafley 01:56:14 01/15/03 (8)
  • Sounds like timing to me (more) - Mike W. 00:38:24 01/16/03 (0)
  • Re: AFM - catdog 07:23:49 01/15/03 (2)
    • Re: AFM - Michael Kucan 09:44:15 01/15/03 (1)
      • Re: AFM - catdog 10:29:47 01/15/03 (0)
  • Re: AFM - Peter Florance 06:09:55 01/15/03 (3)
    • Re: AFM - Christian oak,ca 14:58:13 01/15/03 (2)
      • no - Peter Florance 16:29:45 01/15/03 (1)
        • Thanks - Christian oak,ca 17:05:45 01/15/03 (0)
• Backfireing - KC Dillard 19:50:24 01/14/03 (2)
  • Re: Backfireing - Mark 21:13:14 01/14/03 (0)
  • Re: Backfireing - Peter Florance 19:58:21 01/14/03 (0)
• Finally got a name for my '80... - Tulsa Dave 15:22:45 01/14/03 (18)
  • Look up German to English translators - Eric Q 18:20:03 01/15/03 (1)
    • Sombody has to use... - Tulsa Dave 20:02:28 01/15/03 (0)
  • WUNDRKR... - Christian, oak,ca 15:05:30 01/15/03 (1)
    • Re: spelling - Christian 15:06:14 01/15/03 (0)
  • Frankenstein (more) - Jim Davis 14:29:06 01/15/03 (1)
    • First Fives Family tree = - Tom in MO 14:43:13 01/15/03 (0)
  • Mine is "The Beast" , , , , , , , , - Jefflee-Atl. 13:37:14 01/15/03 (0)
  • mine: "billy the freeway terrorist" - greghill-phx,az 10:39:29 01/15/03 (0)
  • Mine is "Flaming Fireball of Death"... - Tim Gin Central NJ 10:20:52 01/15/03 (0)
  • IMRETWS (nt) - Eric Q 17:35:42 01/14/03 (0)
  • Re: Finally got a name for my '80... - Eric Q 17:29:40 01/14/03 (0)
  • SMFNBLU or SMFBLAU - Eric Q 17:28:48 01/14/03 (1)
    • Hey... That works! - Lars... 20:23:55 01/14/03 (0)
  • Schmurfenblau won't fit Oregon plate either! - Lars 17:12:40 01/14/03 (0)
  • Mine is the "Blue Legend" - Derek 17:03:05 01/14/03 (0)
  • Re: Finally got a name for my '80... - stewart 16:56:10 01/14/03 (2)
    • Always something? - Eric Q 17:37:00 01/14/03 (1)
      • Yep... That's it... - Tulsa Dave 11:12:00 01/15/03 (0)
• here is a link to pictures of my E12 and... - billy in SLO 13:48:16 01/14/03 (3)
  • Did you hand fabricate the console... - Tulsa Dave 15:15:13 01/14/03 (2)
    • link to earlier post... - billy in SLO 16:27:41 01/14/03 (1)
      • Thanks... (nt) - Tulsa Dave 16:53:22 01/14/03 (0)
• Hello all, impressions after owning 4 months - joehahn 13:25:11 01/14/03 (2)
  • Re: Hello all, impressions after owning 4 months - Peter Florance 16:02:08 01/14/03 (0)
  • Cool! - ChuckNC 14:19:44 01/14/03 (0)
• Clear indicator lenses ebay.de - james 12:36:35 01/14/03 (0)
• Paging Dan Andersson - J.Five 09:51:33 01/14/03 (0)
• Aircon anyone?? - Jacky 03:25:09 01/14/03 (2)
  • Al Taylor - Peter Florance 05:15:13 01/14/03 (1)
    • Re: Al Taylor - Jacky 09:53:23 01/14/03 (0)
• BackFire - Kc Dillard 23:04:49 01/13/03 (0)
• BMP Clearance - Troy Rudolph 22:45:33 01/13/03 (1)
  • Re: BMP Clearance - Beamher Bob 10:04:51 01/14/03 (0)
• Catching E12 bug - BarryM 22:45:25 01/13/03 (1)
  • Re: Catching E12 bug - Chris Hollis, Huntsville, AL 14:17:24 01/14/03 (0)
• Euro rear bumper for a 1981 528i - Robert Holly 20:56:00 01/13/03 (0)
• Wheel Removal ? - Brian in Abilene 19:01:32 01/13/03 (6)
  • Re: Wheel Removal ? - Don Daynes 20:27:33 01/13/03 (0)
  • Re: Wheel Removal ? - Peter florance 19:04:38 01/13/03 (4)
    • I'll try it. I don't have to remove the center - Brian in Abilene 19:06:05 01/13/03 (3)
      • Center cap can stay on... - Tulsa Dave 19:21:52 01/13/03 (2)
        • Thanks for the tip! - Brian in Abilene 19:41:14 01/13/03 (1)
          • Re: The caps are mounted from behind NT - Blair 20:13:22 01/13/03 (0)
• '77 530i fs - Random-535is 18:43:45 01/13/03 (2)
  • were always looking... - billy in SLO 22:35:22 01/13/03 (1)
    • Re: were always looking... - Random-535is 18:38:17 01/14/03 (0)
• Exhaust - Dave 16:04:28 01/13/03 (3)
  • Re: Exhaust - Troy Rudolph 18:12:22 01/13/03 (0)
  • Re: Exhaust - ChuckNC 16:41:46 01/13/03 (1)
    • Re: Exhaust - David 20:54:38 01/15/03 (0)
• Terminology?? Cranks & Cams - karl sisson 14:16:43 01/13/03 (2)
  • Re: Terminology?? Cranks & Cams - Mark 21:30:37 01/14/03 (0)
  • a search on google... - greghill-phx,az 14:59:10 01/13/03 (0)
• Post weekend update... - Tulsa Dave 14:01:14 01/13/03 (0)
• This post on e12 bimmer.org Head/Schrick - Lars Bend Or 13:51:43 01/13/03 (0)
• Saw this on ebay.... No Afill, etc.... - Kaveman 12:36:05 01/13/03 (2)
  • here's an east coast 3.5 - ..tom 17:37:38 01/13/03 (0)
  • Not trying to ONE-UP anyone, but ....... - Lars Bend Or 12:50:19 01/13/03 (0)
• e12 V8 - Bond 09:35:13 01/13/03 (1)
  • Re: E12 V8 - Troy Rudolph 18:24:39 01/13/03 (0)
• How to get rear backing plate off??? Anyone?? - Craig Day 09:02:47 01/13/03 (4)
  • Alternate Method - Troy Rudolph 18:26:25 01/13/03 (0)
  • Re: How to get rear backing plate off??? Anyone?? - Peter Florance 09:19:36 01/13/03 (2)
    • How to drive it out stubb axle? - Craig Day 11:01:43 01/13/03 (1)
      • Re: How to drive it out stubb axle? - Peter Florance 11:17:49 01/13/03 (0)
• A/C e12 wanted - Jacky 08:11:49 01/13/03 (0)
• Early 6 series Alpina suspension - Eric Q 02:00:56 01/13/03 (2)
  • Ident the Early 6 series Alpina suspension - Cristian In Sydney-Oz 15:29:16 01/13/03 (1)
    • Would you mind e-mailing me... - Eric Q 18:16:02 01/13/03 (0)
• 5 speed center console - Robert Holly 23:54:36 01/12/03 (5)
  • Very minor diff, if after Concours d'Elegance pts. - Lars Bend Or 09:11:15 01/13/03 (1)
    • Since when did you take an E12 to Forrest Grove? - Frank H 15:58:03 01/13/03 (0)
  • The console is the same. (nt) - james 02:21:37 01/13/03 (0)
  • The console is the same. (nt) - james 02:21:32 01/13/03 (1)
    • Thanks. I thought so. (nt) - Robert Holly 06:35:37 01/13/03 (0)
• radiator upgrade notes - greghill-phx,az 22:21:48 01/12/03 (1)
  • Re: additional notes - Peter Claassen 13:52:25 01/13/03 (0)
• BMW CCA President.... OT - Jim 20:37:29 01/12/03 (0)
• e12 front spoiler - Robert Holly 16:25:39 01/12/03 (12)
  • Re: e12 front spoiler - Eddie (Toronto,Ont.Canada) 12:09:39 01/13/03 (0)
  • Are you talking M535i front spoilers........ - BNC 20:27:10 01/12/03 (1)
    • Yes. - Robert Holly 23:49:48 01/12/03 (0)
  • Re: e12 front spoiler - Jeff C 20:16:35 01/12/03 (8)
    • Re: e12 front spoiler - james 02:24:55 01/13/03 (3)
      • One of the mounting brackets and making a spoiler - Jeff C 06:59:22 01/13/03 (2)
        • Re:Making a spoiler - Al from Oz 23:08:57 01/13/03 (0)
        • Re: One of the mounting brackets and making a spoiler - james 07:22:42 01/13/03 (0)
    • Re: e12 front spoiler - james 02:24:34 01/13/03 (0)
    • Reproduction M535i spoiler. - Al from Oz. 00:12:24 01/13/03 (1)
      • I have thought of that, have 2 other custom..... - BNC 07:26:15 01/13/03 (0)
    • thanks - Robert Holly 23:50:23 01/12/03 (0)
• Idle - Dan Lafley 14:47:41 01/12/03 (1)
  • Something is wrong - Mike W. 18:13:05 01/12/03 (0)
• Maintain your braking system.(Longish) - Will Ollison 10:25:16 01/12/03 (10)
  • Re: Maintain your braking system.(Longish) - Andrew 17:57:49 01/12/03 (3)
    • Re: Maintain your braking system.(Longish) - Remy Davison 07:47:37 01/13/03 (0)
    • Mini Moke? - Bill Bowes 20:39:26 01/12/03 (1)
      • Re: Mini Moke? - Andrew 00:44:12 01/13/03 (0)
  • Re: Maintain your braking system.(Longish) - Will Ollison 14:51:32 01/12/03 (0)
  • AMEN! - ChuckNC 11:09:05 01/12/03 (0)
  • Threshhold braking - Peter Florance 10:51:43 01/12/03 (3)
    • Driver Training - Al from Oz 16:18:57 01/12/03 (0)
    • Drivers Ed the way it was once taught.... - Lars Bend Or 12:40:39 01/12/03 (1)
      • Sorry. point of all that... Peter is right - Lars 12:45:00 01/12/03 (0)
• Looking for rear bumper that fits 1986 325 BMW - Richard 08:43:44 01/12/03 (1)
  • Re: Looking for rear bumper that fits 1986 325 BMW - ChuckNC 10:57:02 01/12/03 (0)
• 30 min. in Archives to find compression info??? - Craig Day 21:57:05 01/11/03 (4)
  • Re: 30 min. in Archives to find compression info??? - Klaus 22:10:26 01/11/03 (3)
    • AFA FAQ's, our original thought was... - Peter Florance 07:55:28 01/12/03 (2)
      • Not questioning FACS, it was ISYS Search....... - Craig Day 18:39:59 01/12/03 (1)
        • Re: Not questioning FACS, it was ISYS Search....... - Peter Florance 19:02:00 01/12/03 (0)
• link test - billy 21:49:52 01/11/03 (4)
  • above is a link to some pics of car - billy in SLO 22:00:04 01/11/03 (3)
    • Re: above is a link to some pics of car - karl sisson 10:19:41 01/13/03 (2)
      • Thanks and.. - billy in SLO 11:36:37 01/13/03 (1)
        • Re: Thanks and.. - karl sisson 12:03:45 01/13/03 (0)
• Thermostat Housing - Klaus 18:41:01 01/11/03 (4)
  • Re: Thermostat Housing - Jeff C 18:52:51 01/11/03 (3)
    • Re: Thermostat Housing - Klaus 21:30:21 01/11/03 (0)
    • housing or cover? - Peter Florance 19:46:31 01/11/03 (1)
      • Re: housing or cover? - Klaus 21:27:54 01/11/03 (0)
• Alpina Bilsteins vs. over the counter Bilsteins? - Brian in Montreal 17:01:19 01/11/03 (4)
  • Re: Alpina vs. over the counter Bilsteins - long - Cristian In SYdney - Oz 15:09:38 01/12/03 (0)
  • Re: Alpina Bilsteins vs. over the counter Bilsteins - Cristian In SYdney - Oz 15:05:04 01/12/03 (1)
    • Sorry stuffed up the submitt to early - Cristian In OZ 15:11:20 01/12/03 (0)
  • Re: Alpina Bilsteins vs. over the counter Bilsteins? - Frank H 12:39:23 01/12/03 (0)
• speedo cable at trany failure.. - billy in SLO 13:57:39 01/11/03 (2)
  • Re: speedo cable at trany failure.. - Sam 19:29:20 01/11/03 (0)
  • Re: speedo cable at trany failure.. - Mike V 14:09:05 01/11/03 (0)
• Bilstein HD vs. Sport Ride Comparison? - Jim Davis 13:37:59 01/11/03 (2)
  • I have heard - Mike W. 14:19:33 01/12/03 (0)
  • sports and rd springs... - ...tom 15:06:01 01/11/03 (0)
• Last day tomorrow partin the 76 530i Diff quest??? - Craig Day 00:30:28 01/11/03 (4)
  • Re: Last day tomorrow partin the 76 530i Diff quest??? - Peter Florance 06:47:59 01/11/03 (3)
    • also - Peter Florance 06:48:45 01/11/03 (2)
      • whats the diff?????? hehehehehehe - Sam Schultz 08:08:19 01/11/03 (1)
        • more info - billy in SLO 13:29:58 01/11/03 (0)
• Thanks everyone..... - Lars Bend Or 13:59:38 01/10/03 (4)
  • Re: Thanks everyone..... - Kristopher Barrett 17:00:40 01/13/03 (0)
  • Re: Thanks everyone..... - billy in SLO 14:46:32 01/10/03 (2)
    • Billy... e-mailed you. - Lars 19:54:43 01/10/03 (0)
    • Billy... e-mailed you. - Lars 19:54:35 01/10/03 (0)
• Replacing a dash light - Tara Knowles 13:39:41 01/10/03 (2)
  • Re: Replacing a dash light - Peter Florance 07:44:17 01/11/03 (0)
  • Re: Replacing a dash light - Phil 15:08:20 01/10/03 (0)
• 1 ? B4 I buy the 528i...smokes...longish - Dave D 13:25:15 01/10/03 (3)
  • VERY important distinction on that smoke.... - Lars Bend Or 13:41:15 01/10/03 (1)
    • Whoops clarification on that mixture comment - Lars 13:44:28 01/10/03 (0)
  • Re: 1 ? B4 I buy the 528i...smokes...longish - billy in SLO 13:37:55 01/10/03 (0)
• What are signs of failing starter/solenoid...... - Misha 13:23:05 01/10/03 (1)
  • Re: What are signs of failing starter/solenoid...... - james 08:35:36 01/11/03 (0)
• For all those looking for a 3.64 LSD... - Jeff C 13:06:00 01/10/03 (3)
  • Re: For all those looking for a 3.64 LSD... - fb 16:09:19 01/11/03 (0)
  • here is a good source - billy in SLO 13:25:05 01/10/03 (0)
  • 4 cyl diff - Peter Florance 13:14:43 01/10/03 (0)
• Spoilers and wheels for BMW 520 - Dario Massone (Argentina) 10:40:48 01/10/03 (2)
  • Re: Spoilers and wheels for BMW 520 - Sam Schultz 08:00:54 01/11/03 (0)
  • Re: Spoilers and wheels for BMW 520 - stewart 12:07:22 01/10/03 (0)
• Headliner Material or Sunroof Insert - Klaus 09:59:25 01/10/03 (3)
  • Try this place - Jeff C 12:54:48 01/10/03 (2)
    • Re: Try this place - Kristopher Barrett 17:23:50 01/13/03 (0)
    • Re: Try this place - Klaus 18:53:19 01/11/03 (0)
• My new air filter (someone asked about it) - Andrew 06:31:24 01/10/03 (1)
  • Posting Pics / Send it to me - Troy Rudolph (Webmaster) 09:33:48 01/10/03 (0)
• e12 A/C - Jacky 01:05:14 01/10/03 (1)
  • What sort of E12? (520, 528, 535?) (eom) - Troy Rudolph 09:35:19 01/10/03 (0)
• Possible Battery drain cause - Peter Florance 22:01:21 01/09/03 (9)
  • my .02 - stewart 12:12:39 01/10/03 (0)
  • the saga continues... - Andrew 01:09:19 01/10/03 (7)
    • Re: the saga continues... - Peter Florance 06:33:46 01/10/03 (6)
      • ok here goes... - Andrew 06:48:51 01/10/03 (5)
        • My .02 - Karl in KS 17:54:11 01/13/03 (0)
        • Re: ok here goes... - Kristopher BArrett 17:45:43 01/13/03 (0)
        • Re: ok here goes... - Bob 13:55:19 01/10/03 (0)
        • Re: ok here goes... - Matt C 11:50:05 01/10/03 (0)
        • sticking starter? - Peter Florance 08:30:51 01/10/03 (0)
• rear backing plates - joe 19:50:51 01/09/03 (2)
  • I will contact you Re: rear backing plates - Craig Day 20:24:23 01/09/03 (1)
    • Who knows hoe to take backing plates off? - Craig Day 18:48:31 01/12/03 (0)
• Widest tires? - John in Simi Valley 18:52:37 01/09/03 (6)
  • YES, to be perfectly direct !!! nt - Jefflee 11:58:15 01/12/03 (0)
  • Re: Widest tires? - Tara Knowles 22:32:34 01/09/03 (3)
    • ditto 225/50 r15 nt - stewart 00:49:18 01/10/03 (2)
      • NO, 225/50 r15 is too different. - John in Simi Valley 04:40:37 01/10/03 (1)
        • Re: NO, 225/50 r15 is too different. - Remy Davison 07:59:02 01/10/03 (0)
  • Re: Widest tires? - Tara Knowles 21:44:07 01/09/03 (0)
• Rear strut tower/diff mount brace - ckn 15:58:22 01/09/03 (2)
  • Re: Rear strut tower/diff mount brace - Peter Florance 17:20:43 01/09/03 (0)
  • Re: Rear strut tower/diff mount brace - Matt C 16:07:47 01/09/03 (0)
• When it rains it pours....Reactors - Matt C 14:46:01 01/09/03 (1)
  • Bavarian Exhaust manifolds - Lars Bend Or 16:09:55 01/09/03 (0)
• Manual window winder interchange - Cristian in Sydney - Oz 14:33:36 01/09/03 (0)
• Cylinder Head on E-Bay...Deal or No? - Dave D '81 528i 12:36:54 01/09/03 (2)
  • Re: Cylinder Head on E-Bay...Deal or No? - Troy Rudolph 13:32:32 01/09/03 (0)
  • Re: Cylinder Head on E-Bay...Deal or No? - Chris Hollis 13:08:24 01/09/03 (0)
• O-Ring Size for Transmission - Klaus 11:06:40 01/09/03 (2)
  • Re: O-Ring Size for Transmission - james 12:23:07 01/09/03 (1)
    • Re: O-Ring Size for Transmission - Klaus 12:49:37 01/09/03 (0)
• Problem with classifieds - Brian in Abilene 10:12:00 01/09/03 (2)
  • Sorry, but ... - Troy Rudolph 11:49:29 01/09/03 (1)
    • Thanks, Troy, wasn't sure who to contact - Brian in Abilene 12:42:54 01/09/03 (0)
• Tearing apart 530i wondering if there is reason - Craig Day 09:34:40 01/09/03 (5)
  • diff. if it is a 3.64 (only in autos I think) - billy in SLO 11:19:01 01/09/03 (1)
    • Diff - Jeff C 11:42:02 01/09/03 (0)
  • Things I have been asked for: - Lars Bend Or 11:08:18 01/09/03 (0)
  • Rondel from hood for memories - Jeff C 10:17:53 01/09/03 (1)
    • Re: Rondel from hood for memories - Matt C 16:13:37 01/09/03 (0)
• Sweden - Mason (BE) 05:31:12 01/09/03 (2)
  • Old BMW's in Sweden... - Jeff Olson 08:18:35 01/09/03 (1)
    • Re: Old BMW's in Sweden... - mason 05:02:50 01/10/03 (0)
• Sweden - Mason (BE) 05:26:35 01/09/03 (0)
• E12 front strut bar - jerry kingman 23:52:07 01/08/03 (0)
• alum hood? - greghill 22:27:17 01/08/03 (1)
  • I don't think so - Mike W. 23:38:52 01/08/03 (0)
• Last Lock Question I promise - Dan Lafley 21:18:44 01/08/03 (2)
  • Re: Last Lock Question I promise - Kaveman 23:53:34 01/08/03 (1)
    • Re: Last Lock Question I promise - Dan Lafley 00:25:06 01/09/03 (0)
• FS tan seats (all) and useable door pannels - Sam Schultz 18:09:12 01/08/03 (0)
• Testing battery drain - Brian in Abilene 17:51:50 01/08/03 (0)
• car for sale - Chad Oetjen 17:03:26 01/08/03 (4)
  • Re: car for sale - chad oetjen 18:16:58 01/08/03 (2)
    • Re: car for sale - Robert Holly 21:46:18 01/08/03 (1)
      • Re: car for sale - chad oetjen 22:33:52 01/08/03 (0)
  • link? location? - ...tom 17:24:38 01/08/03 (0)
• M535i steering wheel - Al from Oz 16:29:53 01/08/03 (1)
  • Re: M535i steering wheel - james 05:35:46 01/09/03 (0)
• Rust repair report......Days 6 & 7. - Al from Oz 16:24:17 01/08/03 (3)
  • Can your nickname be "Rusty" now ?? nt - Jefflee 20:33:06 01/08/03 (2)
    • Re: Can your nickname be "Rusty" now ?? nt - Al from Oz 23:56:55 01/08/03 (1)
      • Nah! Wire wheel will take it right off. nt - Lars 09:58:12 01/09/03 (0)
• Windshield replacement w/E28 M5? - billy in SLO 13:47:19 01/08/03 (2)
  • you need shadowline - james 15:18:49 01/08/03 (1)
    • Actually, Shadowline was standard on all North... - Tim G in Central NJ 16:18:14 01/09/03 (0)
• 3.0 cylinder heads - Matt C 11:51:31 01/08/03 (6)
  • They do like to crack - Mike W. 23:50:39 01/08/03 (3)
    • dates? - Peter Florance 05:43:05 01/09/03 (2)
      • Re: dates? - Mike W. 23:33:26 01/09/03 (1)
        • Re: dates? - Matt C 18:49:55 01/10/03 (0)
  • There's plenty of good heads out there.... - Bill Bowes 20:42:19 01/08/03 (0)
  • AMC - Peter Florance 12:01:33 01/08/03 (0)
• 79 633 seats fit 80 528I - Alan V 08:07:53 01/08/03 (1)
  • Doubtful.. I have a 77 630 - Lars Bend Or 11:01:52 01/08/03 (0)
• spoilers - joel 23:06:02 01/07/03 (3)
  • Re: spoilers - Will Ollison 05:35:02 01/08/03 (2)
    • Re: spoilers - Joel 19:10:37 01/11/03 (0)
    • Re: spoilers - Dario 10:29:26 01/10/03 (0)
• rear seats? - stewart 21:11:56 01/07/03 (2)
  • Have 85 535i E28 seats in a 75 530I. Fit is good - Misha 12:03:57 01/08/03 (0)
  • E 28... have put them in a 77 and an 81 - Lars Bend Or 21:57:29 01/07/03 (0)
• Paging Don Dayes - Wietse (it was 60 in Ft Collins today -beautiful) 19:41:46 01/07/03 (0)
• What size rear rubber is everyone running?? - Andrew 18:09:19 01/07/03 (13)
  • 275-40-17 Good Year Eagles - jeff 19:30:59 01/10/03 (0)
  • 215/60-14 YOKO'S - billy in SLO 10:03:17 01/08/03 (1)
    • 205/55-16 YOKO'S AVS DB - Peter Florance 12:03:17 01/08/03 (0)
  • Re: What size rear rubber is everyone running?? - Tom in NY 08:00:43 01/08/03 (1)
    • Do you want the Ford truck with or without the , , - Jefflee-Atlanta 10:39:01 01/09/03 (0)
  • Re: What size rear rubber is everyone running?? - Eric Q 02:38:26 01/08/03 (1)
    • Ditto (nt) - Lenny D. 13:55:32 01/08/03 (0)
  • 225/55 - 16 Michelin Pilot HX E39 et20 wheels... - Don Daynes 22:55:59 01/07/03 (0)
  • Yokohama AVS dB, 205/60VR15 on all four (eom) - Troy Rudolph 22:05:50 01/07/03 (0)
  • Re: What size rear rubber is everyone running?? - Jefflee 21:45:46 01/07/03 (0)
  • 225/50 r15 eom - stewart 21:09:51 01/07/03 (0)
  • Re: What size rear rubber is everyone running?? - Cristian In Sydney - Oz 20:00:46 01/07/03 (0)
  • Re: What size rear rubber is everyone running?? - karl sisson 19:08:02 01/07/03 (0)
• My AAV is working in reverse! - Blair 17:14:44 01/07/03 (2)
  • Check your timing - Mike W. 23:55:14 01/08/03 (0)
  • Re: My AAV is working in reverse! - Peter Florance 18:07:03 01/07/03 (0)
• Will the seats from an 85 735i fit into a 76 530i - karl sisson 15:56:40 01/07/03 (2)
  • Front seats only, steering wheel definitely no.... - Craig Day 17:10:53 01/07/03 (1)
    • Steering wheel, 85 yes, 86+, no - Mike W. 00:29:18 01/08/03 (0)
• radiator USD400+? - greghill 14:37:44 01/07/03 (4)
  • thanks guys... - greghill-phx,az 23:10:56 01/07/03 (0)
  • Upgrade to an e28 radiator - Peter Claassen 17:30:06 01/07/03 (0)
  • Re: radiator USD400+? - billy in SLO 16:21:30 01/07/03 (0)
  • Re: radiator USD400+? - Wietse - Fort Collins 14:48:40 01/07/03 (0)
• Changing Motor Mounts O.K. on '81 528i? - Dave D. 14:06:09 01/07/03 (3)
  • Re: Changing Motor Mounts OK - Karl in KS 17:27:06 01/07/03 (0)
  • Re: Changing Motor Mounts O.K. on '81 528i? - Jeff C 15:48:50 01/07/03 (1)
    • Thanks for the visuals... - Dave 16:29:30 01/07/03 (0)
• Surging idle question - Brian in Abilene 13:44:51 01/07/03 (4)
  • Re: Surging idle question - Peter Florance 14:07:06 01/07/03 (3)
    • Thanks! - Brian in Abilene 14:09:52 01/07/03 (2)
      • Re: Thanks! - Peter Florance 14:49:59 01/07/03 (1)
        • The wife will have no problem with a freezer test. - Brian in Abilene 16:21:20 01/07/03 (0)
• Seats from 325 IS fit - Alan V 11:49:53 01/07/03 (2)
  • Re: Seats from 325 IS fit - Kaveman 11:54:02 01/07/03 (1)
    • Re: Seats from 325 IS fit - Alan V 13:44:04 01/07/03 (0)
• WebSite Help Needed! - Troy Rudolph (Webmaster) 11:30:04 01/07/03 (4)
  • Unix server - Peter Florance 11:41:05 01/07/03 (3)
    • It doesn't matter that much ... - Troy Rudolph 12:43:31 01/07/03 (2)
      • Re: It doesn't matter that much ... - Peter Florance 12:46:12 01/07/03 (1)
        • please email me at work/home re your concerns. eom - Troy Rudolph 13:08:46 01/07/03 (0)
• How hard is it to find a 79-81 Euro spec 635i? - karl sisson 09:50:40 01/07/03 (9)
  • Know of 1 in Missouri - BillW in STL 13:38:38 01/16/03 (0)
  • Early Euro Spec 635CSi... This off Autotrader tdy> - Lars 18:23:13 01/07/03 (0)
  • I know where there are 2 at a wreckers - 5keta 16:56:20 01/07/03 (1)
    • email undeliverable - 5keta 23:13:10 01/07/03 (0)
  • eBay, Collector Car Trader, Bimmer.org ads, etc. - Jeff Olson 10:37:21 01/07/03 (0)
  • Try these sources. - Lars Bend Or 10:25:17 01/07/03 (0)
  • I recently came across a motronic sixer with a - mark 10:21:30 01/07/03 (0)
  • easier than euro e12s - ...tom 10:05:44 01/07/03 (1)
    • Re: easier than euro e12s - karl sisson 18:11:17 01/08/03 (0)
• 3 questions - Alan V 08:54:55 01/07/03 (5)
  • some e12 carpet is still available from BMW (EOM) - james 02:21:29 01/08/03 (0)
  • Re: 3 questions - Troy Rudolph 11:34:48 01/07/03 (0)
  • Re: 3 questions - Klaus 11:08:23 01/07/03 (0)
  • Re: 3 questions - Jeff C 09:12:50 01/07/03 (1)
    • Re: 3 questions - Alan V 09:46:29 01/07/03 (0)
• Grassroots Motorsports Articles: Project 5 Series - karl sisson 05:52:59 01/07/03 (2)
  • Not sure if this helps but here's the link... - Jeff Olson 09:12:23 01/07/03 (1)
    • Re: Not sure if this helps but here's the link... - karl sisson 09:41:48 01/07/03 (0)
• Brrr! - Peter Florance 05:38:08 01/07/03 (2)
  • Re: Brrr! - Kaveman 11:55:42 01/07/03 (0)
  • LOL...Ceck your email Boss - Scott 08:52:54 01/07/03 (0)
• Fuel plumbing question - Andrew 01:54:50 01/07/03 (7)
  • Re: Fuel plumbing question - Karl in KS 17:33:10 01/07/03 (0)
  • Re: Fuel plumbing question - Peter Florance 05:43:43 01/07/03 (5)
    • Re: Fuel plumbing question - Andrew 16:49:18 01/07/03 (4)
      • Re: Fuel plumbing question - Peter Florance 17:52:02 01/07/03 (3)
        • Re: Fuel plumbing question - Andrew 18:04:26 01/07/03 (2)
          • Re: Fuel plumbing question - Peter Florance 18:09:12 01/07/03 (1)
            • Re: Fuel plumbing question - Andrew 18:11:36 01/07/03 (0)
• Sun Roof Question - Klaus 00:21:01 01/07/03 (2)
  • cable timing? - David B 01:11:25 01/07/03 (1)
    • Re: cable timing? - Klaus 10:58:33 01/07/03 (0)
• locks - Dan Lafley 23:59:00 01/06/03 (6)
  • Re: locks - Peter Florance 05:46:06 01/07/03 (5)
    • Re: locks - Dan Lafley 10:53:43 01/07/03 (4)
      • Re: locks - Peter Florance 14:08:30 01/07/03 (3)
        • Re: locks - Dan Lafley 02:38:19 01/08/03 (2)
          • Re: locks - Peter Florance 07:03:39 01/08/03 (1)
            • Re: locks - Dan Lafley 13:07:40 01/08/03 (0)
• free set of front urethane swaybar link bushings - Paul Gray 23:17:18 01/06/03 (0)
• OT for Don Daynes - Lars 22:56:44 01/06/03 (2)
  • That is the BADDEST! - Scott 09:13:06 01/07/03 (0)
  • Mikey... if you're watching...look close... you >> - Lars 22:58:08 01/06/03 (0)
• Parting out 76 530i with thermal reactors, - Craig Day 20:43:54 01/06/03 (2)
  • Re: Parting out 76 530i with thermal reactors, - MIKE 13:01:08 01/07/03 (1)
    • I live outside Salt Lake, Utah - Craig Day 17:22:19 01/07/03 (0)
• jacking up all 4 corners - Greg 20:19:14 01/06/03 (0)
• Who want's a BOSCH tech booklet for KE-JET W/CAT - Matt C 19:47:40 01/06/03 (0)
• message for mike fuerst - jerry kingman 16:24:54 01/06/03 (0)
• bosch l-jetronic injection system - joel 15:39:26 01/06/03 (4)
  • Re: bosch l-jetronic injection system - joel 16:17:59 01/08/03 (0)
  • Re: bosch l-jetronic injection system - Doug S. 11:41:19 01/07/03 (0)
  • FAQ's on this site? - Peter Florance 15:57:58 01/06/03 (1)
    • Re: FAQ's on this site? - joel 10:29:10 01/12/03 (0)
• 3.5 Timing values. - Cristian In Sydney - Oz 15:04:00 01/06/03 (2)
  • Re: 3.5 Timing values. - Peter Florance 15:38:52 01/06/03 (1)
    • Thanks Peter (nt) - Cristian in OZ 22:45:57 01/06/03 (0)
• Vacuum Advance Help - Jim Hineline 10:09:56 01/06/03 (5)
  • Correct port? - Peter Florance 11:07:35 01/06/03 (4)
    • Re: Correct port? - Jim Hineline 13:08:01 01/06/03 (3)
      • Re: Correct port? - Don Daynes 13:42:52 01/06/03 (2)
        • Re: Correct port? - Jim Hineline 16:21:36 01/06/03 (1)
          • Re: Correct port? - Peter Florance 16:50:02 01/06/03 (0)
• FS 79 528i complete harness, ECU, intake, - Craig Day 08:09:59 01/06/03 (4)
  • Re: FS 79 528i complete harness, ECU, intake, - P. Odom 08:34:11 01/06/03 (3)
    • ECU part number is 118 - Craig Day 20:39:02 01/06/03 (2)
      • Re: -118 ECU - Troy Rudolph 15:35:55 01/07/03 (0)
      • from what I can tell - Peter Florance 20:49:52 01/06/03 (0)
• Hallelujah! passed emissions without reactors - Craig Day 08:05:23 01/06/03 (0)
• Radio fitment advice (hugely long) - Al from Oz 05:40:37 01/06/03 (2)
  • Thanks, I needed that (nt) - Karl 18:05:40 01/06/03 (0)
  • Wow! That's my method too! - Mr. Coffey 12:49:16 01/06/03 (0)
• charge light starting to glow - Jimmy in Vegas 23:40:14 01/05/03 (4)
  • mine too - Karl in KS 18:17:10 01/06/03 (0)
  • Also check battery clamps...(more) - Brian in Abilene 08:11:50 01/06/03 (0)
  • Re: charge light starting to glow - Peter Florance 05:25:44 01/06/03 (0)
  • Re: charge light starting to glow - Ken 02:50:19 01/06/03 (0)
• Where's a good place to get weatherstiping? - jason 23:35:39 01/05/03 (1)
  • noise reduction FAQ - Peter Florance 05:27:29 01/06/03 (0)
• 745i - Dan Lafley 22:01:15 01/05/03 (5)
  • 745i Parts Needed - Craig Day 07:35:03 01/06/03 (1)
    • Re: 745i Parts Needed - Dan Lafley 01:24:05 01/07/03 (0)
  • Not much - Mike W. 23:20:30 01/05/03 (2)
    • Locks - dan Lafley 03:26:31 01/06/03 (1)
      • Re: Locks - Tulsa Dave 07:14:23 01/06/03 (0)
• Thanks Jeff C - Peter Florance 21:19:39 01/05/03 (0)
• Somebody Shoot this E12 "1970 M533i" - Chris 20:30:44 01/05/03 (2)
  • How about the seller? - Jeff C 09:10:15 01/06/03 (1)
    • Re: How about the seller? - Kristopher Barrett 18:28:00 01/14/03 (0)
• Tach gremlin? - Brian in Abilene 17:42:23 01/05/03 (6)
  • flaky gage - Karl in KS 18:22:53 01/06/03 (2)
    • Re: flaky gage - Karl in KS 18:23:58 01/06/03 (1)
      • Abilene, Texas - Brian in Abilene 08:58:53 01/07/03 (0)
  • Thanks Don and Peter, I wondered if I had not... - Brian in Abilene 08:08:43 01/06/03 (0)
  • Re: Tach gremlin? - Don Daynes 22:29:46 01/05/03 (0)
  • Paging Jeff C - Peter Florance 21:12:59 01/05/03 (0)
• Saved by my stubby.... - Lars Bend Or 16:46:21 01/05/03 (0)
• Windows - Chris Nogs 13:38:50 01/05/03 (1)
  • Re: Windows - Peter Florance 13:47:21 01/05/03 (0)
• Car of the Month - January - Troy Rudolph (Webmaster) 22:06:59 01/04/03 (6)
  • Re: Car of the Month - January - Chris Hollis, Huntsville, AL 18:17:37 01/05/03 (0)
  • Re: Car of the Month - January - Will Ollison 12:06:11 01/05/03 (0)
  • Re: Car of the Month - January - Eddie (Toronto,Ont. Canada) 22:26:20 01/04/03 (3)
    • Re: Car of the Month - January - Ken 23:22:13 01/04/03 (2)
      • Re: Car of the Month - January - karl sisson 10:17:49 01/05/03 (1)
        • Re: Car of the Month - January - Eric Q 21:03:00 01/07/03 (0)
• mmmmmm....turbo - Ryan Bryan 21:54:49 01/04/03 (9)
  • Re: mmmmmm....turbo - Frank H 11:15:22 01/05/03 (1)
    • Frank, email me if you want to know why. - TCD 14:09:36 01/05/03 (0)
  • Re: mmmmmm....turbo - Ken 23:21:10 01/04/03 (0)
  • Re: mmmmmm....turbo - Andrew 22:46:08 01/04/03 (5)
    • Re: mmmmmm....turbo - Scott 23:18:09 01/04/03 (4)
      • Re: mmmmmm....turbo - Andrew 23:30:07 01/04/03 (3)
        • Wrong Gas man.... - Scott 18:06:08 01/05/03 (0)
        • Heat is what drives it - Mike W. 00:06:16 01/05/03 (1)
          • heat is part of it yes - mikey 02:14:07 01/05/03 (0)
• Why does my battery keep going flat? - Andrew 18:26:08 01/04/03 (10)
  • Re: Why does my battery keep going flat? - joel 11:17:00 01/12/03 (0)
  • Re: Why does my battery keep going flat? - Will Ollison 12:31:32 01/05/03 (0)
  • Re: Why does my battery keep going flat? - karl sisson 10:34:30 01/05/03 (0)
  • Take a deep breath and start over, (more, long) - Mike W. 00:33:38 01/05/03 (0)
  • Re: Why does my battery keep going flat? - Mark 21:52:12 01/04/03 (1)
    • Re: Why does my battery keep going flat? - Andrew 22:12:55 01/04/03 (0)
  • Re: Why does my battery keep going flat? - Ryan Brtyan 21:22:42 01/04/03 (1)
    • good idea - mikey 02:38:40 01/05/03 (0)
  • Re: Why does my battery keep going flat? - Mike V 19:13:54 01/04/03 (1)
    • Check all your grounds,,,especially the - Jefflee 19:31:55 01/04/03 (0)
• Electric Locks - Dan Lafley 18:18:26 01/04/03 (0)
• Mobile Tradition CD ROM - Loren 12:53:45 01/04/03 (2)
  • No but.... - Jeff C 14:41:08 01/04/03 (1)
    • It's alive! - Loren 16:38:03 01/04/03 (0)
• HEY!!!!! Where's our Rust Report.....DO I - Lars BendOr 12:50:12 01/04/03 (1)