Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XXVII

(2003/01/20 - 2003/02/27/font>

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• Test Message 3 - Troy Rudolph (Webmaster) 18:17:41 02/27/03 (0)
• Engine Fan - Larry Wright 17:25:37 02/27/03 (0)
• Surging at idle and Valve seals - Nick, CO 15:49:15 02/27/03 (1)
  • unplug the idle switch and drive it - Peter Florance 16:20:05 02/27/03 (0)
• Sold the E12 today! - Jordan Angle 15:32:50 02/27/03 (2)
  • Wow, Thats Quite a lump, what mods if any did you - Scott 16:52:00 02/27/03 (1)
    • Re: Wow, Thats Quite a lump, what mods if any did - Jordan Angle 17:05:37 02/27/03 (0)
• center caps - Jeff 12:37:41 02/27/03 (2)
  • Re: center caps - T.Han 13:55:21 02/27/03 (0)
  • Re: center caps - Randy 13:54:44 02/27/03 (0)
• Timing and Gas Mileage? - Kaveman 10:41:03 02/27/03 (1)
  • I know you thought of this already.... BUT> - Lars Olbimmerguy 10:47:14 02/27/03 (0)
• Frank H. - Maybe you know what this is? Alpina - Greg 07:47:51 02/27/03 (1)
  • Re: Frank H. - Maybe you know what this is? Alpina - Frank H 10:54:48 02/27/03 (0)
• Hey, I'm not carbureted anymore! - Nick, CO 06:34:16 02/27/03 (1)
  • Re: Hey, I'm not carbureted anymore! - Andrew 14:55:59 02/27/03 (0)
• Spoliers - Dan Lafley 00:03:35 02/27/03 (2)
  • Re: Spoliers - Lee or Kathy Cornett 01:44:04 02/27/03 (1)
    • check your email Lee - Scott 13:19:45 02/27/03 (0)
• '77 530i for sale - fred 21:02:12 02/26/03 (1)
  • WHERE is it and HOW much? - Jeff Olson 22:33:07 02/26/03 (0)
• selling my '77 E12 - Fred 20:44:50 02/26/03 (0)
• Car won't start during/after rainstorm - Scott in Hawaii 20:40:29 02/26/03 (1)
  • Re: Car won't start during/after rainstorm - Al from Oz 22:50:47 02/26/03 (0)
• RUST, Rust, rust....Found this interesting link. - Lars Olbimmerguy 19:30:13 02/26/03 (1)
  • Scary stuff, rust. - John in Simi Valley 09:59:25 02/27/03 (0)
• Zender trunk (Boot) spoiler FS - Al from Oz 17:27:58 02/26/03 (4)
  • MINE!! - Andrew 02:54:57 02/27/03 (0)
  • Re: Zender trunk (Boot) spoiler FS - Dan Lafley 20:34:35 02/26/03 (2)
    • Located in Brisbane , Australia. - Al from Oz 20:56:26 02/26/03 (0)
    • Oh...nm - Dan 20:36:05 02/26/03 (0)
• Tail light replacement tip. - Al from Oz 17:15:42 02/26/03 (0)
• slightly OT, compressor for the garage, opinions? - Adam Wilson 16:46:31 02/26/03 (8)
  • thanks for the advice guys - Adam Wilson 23:20:39 02/26/03 (0)
  • You will probably.... - Lars Olbimmerguy 19:27:38 02/26/03 (0)
  • Re: slightly OT, compressor for the garage, opinions? - Kaveman 19:06:40 02/26/03 (0)
  • I have an oiless - Jeff C 19:02:20 02/26/03 (0)
  • whatever you do - Peter Florance 18:36:19 02/26/03 (1)
    • While I don't specifically disagree with you,... - Tulsa Dave 19:05:23 02/26/03 (0)
  • Try Home Depot - Jeff F 18:15:43 02/26/03 (0)
  • Depends... - Tulsa Dave 17:59:51 02/26/03 (0)
• something's spinning - JPea 16:43:19 02/26/03 (1)
  • Re: something's spinning - Remy Davison 07:16:46 02/27/03 (0)
• Resistor Plugs - Dan Lafley 16:32:06 02/26/03 (6)
  • Re: Resistor Plugs - Klaus 17:27:36 02/26/03 (3)
    • Klaus, why are the Platinums disregarded as a bad - Scott 13:17:05 02/27/03 (2)
      • WR9DC or WR9DS - Peter Florance 15:42:37 02/27/03 (1)
        • Thanks Peter...(m) - Scott 17:04:58 02/27/03 (0)
  • Re: Resistor Plugs - Lou in Denver 17:10:52 02/26/03 (0)
  • Re: Resistor Plugs - Frank H 16:49:29 02/26/03 (0)
• need a neutral switch for bkup lts - Bill Mann 16:16:59 02/26/03 (0)
• shameless plug...bilsteins fs on ebay - jason griffith 15:30:48 02/26/03 (0)
• Rear spoilers - T.Han 14:56:11 02/26/03 (4)
  • you mean like this or an e28 spoiler? - ...tom 17:24:03 02/26/03 (3)
    • Wow, nobody bought that M535i spoiler on Ebay? - Nick, CO 06:25:15 02/27/03 (0)
    • Re: you mean like this or an e28 spoiler? - T.Han 21:34:11 02/26/03 (1)
      • i have one, email me for photo - ...tom 22:04:47 02/26/03 (0)
• anyone have a climate control heater tap?? - Andrew 14:52:22 02/26/03 (0)
• lots of new....GOODIES :D - Andrew 14:50:14 02/26/03 (0)
• Tach Not Working - Chris 13:04:12 02/26/03 (3)
  • Re: Tach Not Working - Tulsa Dave 15:04:57 02/26/03 (0)
  • Re: Tach Not Working - Peter Florance 13:42:52 02/26/03 (1)
    • Re: Tach Not Working - Mike V. 01:22:47 02/27/03 (0)
• how do u properly replace brake fluid? - Ryan Bryan 11:53:51 02/26/03 (9)
  • Re: how do u properly replace brake fluid? - Kristopher Barrett 16:58:12 02/26/03 (1)
    • Consider rebuilding calipers as well (nt) - Kristopher Barrett 17:01:03 02/26/03 (0)
  • Re: how do u properly replace brake fluid? - Frank H 16:42:44 02/26/03 (0)
  • Re: how do u properly replace brake fluid? - KSB in VA 13:21:01 02/26/03 (0)
  • Re: how do u properly replace brake fluid? - Chris Hollis, Huntsville, AL 13:11:03 02/26/03 (0)
  • Re: how do u properly replace brake fluid? - Troy Rudolph 12:02:38 02/26/03 (3)
    • Re: how do u properly replace brake fluid? - Ryan Bryan 13:12:53 02/26/03 (1)
      • Re: how do u properly replace brake fluid? - Troy Rudolph 13:16:57 02/26/03 (0)
    • I agree... - Tulsa Dave 12:06:35 02/26/03 (0)
• FS-E12 Red leather interior - Pete Reeves 10:57:24 02/26/03 (1)
  • Re: FS-E12 Red leather interior - will ollison 11:51:39 02/26/03 (0)
• Auto-tranny indicator lights - Kristopher Barrett 10:29:48 02/26/03 (2)
  • Re: Auto-tranny indicator lights - Klaus Bertram 10:32:56 02/26/03 (1)
    • Re: Auto-tranny indicator lights - Kristopher Barrett 10:40:48 02/26/03 (0)
• Hey Nath, my computer says the same about yours.nt - James from New Zealand 05:58:07 02/26/03 (1)
  • Re: Hey Nath, my computer says the same about yours.nt - Nath in Tassie 16:59:55 02/26/03 (0)
• Troy.... Loving that "back to the Board" Link - Lars Olbimmerguy 01:18:04 02/26/03 (7)
  • Re: Troy.... Loving that "back to the Board" Link - Troy Rudolph 12:05:29 02/26/03 (5)
    • Re: Troy.... Loving that "back to the Board" Link - justin webster 12:43:56 02/26/03 (4)
      • Ooooops. Hung by my own bad memory... - Lars Bend Or 14:56:07 02/26/03 (3)
        • Re: Ooooops. Hung by my own bad memory... - Troy Rudolph 15:12:21 02/26/03 (2)
          • This whole thread is hilarious! nt..... - Scott 21:57:55 02/26/03 (1)
            • Curses! Ya Got Me. NT - Lard Olbimmerguy 22:31:00 02/26/03 (0)
  • excellent addition - Peter Florance 06:52:22 02/26/03 (0)
• Troy... loving that "back to the board" link - Lars Olbimmerguy 01:17:17 02/26/03 (0)
• What a difference a Guibo makes ! - Peter Claassen 22:55:36 02/25/03 (3)
  • Did you replace the center pilot bushing too? - Fred 20:42:25 02/26/03 (0)
  • Re: What a difference a Guibo makes ! - Bill Bowes 19:11:27 02/26/03 (0)
  • Re: What a difference a Guibo makes ! - Kaveman 10:14:33 02/26/03 (0)
• Car Talk puzzler from hell ! - Peter Claassen 22:43:49 02/25/03 (3)
  • no - Frank H 09:25:35 02/26/03 (2)
    • Re: no - Peter Claassen 10:32:00 02/26/03 (1)
      • It works out... - Tulsa Dave 12:05:02 02/26/03 (0)
• Nathan Cann is Nath in Tassie (I stuffed up!) - Nath in Tassie 22:35:25 02/25/03 (6)
  • What??? - Scott 11:00:51 02/26/03 (5)
    • Translation! - Al from Oz. 16:08:20 02/26/03 (4)
      • LMAO! Thats Sweet, Good Job! - Scott 21:49:25 02/26/03 (0)
      • Aussies in general - Peter Florance - First Fives Dictator for Life 18:39:57 02/26/03 (0)
      • Great job Al! - Nath in Tassie 16:54:14 02/26/03 (1)
        • Hey I forgot the UTE !!!!!!!!!!!!! - Al from Oz 18:21:24 02/26/03 (0)
• Price guide - Nathan Cann 22:31:22 02/25/03 (3)
  • Re: Price guide - Remy Davison 07:32:21 02/26/03 (0)
  • You got a bargain by the sound of it! - James from New Zealand 05:50:18 02/26/03 (1)
    • Re: You got a bargain by the sound of it! - Nath in Tassie 16:56:45 02/26/03 (0)
• Stupid question...E28 front seats fit a E12? - Jeff Olson 21:54:07 02/25/03 (7)
  • Seats,, very Yes...Doors... Yes... BUT! - Lars Olbimmerguy 01:14:46 02/26/03 (0)
  • Re: Stupid question...E28 front seats fit a E12? - Don Daynes 23:00:43 02/25/03 (2)
    • Re: Stupid question...E28 front seats fit a E12? - Jim Davis 00:09:22 02/26/03 (1)
      • Re: Stupid question...E28 front seats fit a E12? - Don Daynes 10:26:20 02/27/03 (0)
  • Re: Stupid question...E28 front seats fit a E12? - Kaveman 22:07:14 02/25/03 (0)
  • By the way, I looked at the most PATHETIC 530i... - Jeff Olson 21:59:44 02/25/03 (1)
    • I feel the need to buy cars like that just to save - Scott 11:04:05 02/26/03 (0)
• spin on oil filter conversion for m90 motor - marc79euro635 21:16:04 02/25/03 (0)
• Check your email James in NZ - Nath in Tassie 18:49:06 02/25/03 (0)
• Hey Nath in Tassie - James from New Zealand 16:46:57 02/25/03 (1)
  • Hey James! - Nath in Tassie 17:43:29 02/25/03 (0)
• Radiator upgrade - Nick, CO 14:55:31 02/25/03 (2)
  • Lower hose comments - Peter Claassen 23:04:17 02/25/03 (0)
  • same here on my 79 528i eom - stewart 20:24:52 02/25/03 (0)
• Trunk lock actuator differences? Help! - Peter Florance 06:10:36 02/25/03 (5)
  • Re: Trunk lock actuator differences? Help! - T-Raz 21:02:20 02/25/03 (4)
    • Re: Trunk lock actuator differences? Help! - Peter Florance 21:36:17 02/25/03 (3)
      • Re: Trunk lock actuator differences? Help! - David B 00:00:31 02/26/03 (2)
        • Re: Trunk lock actuator differences? Help! - Kristopher Barrett 10:36:51 02/26/03 (0)
        • Re: Trunk lock actuator differences? Help! - Remy Davison 07:42:13 02/26/03 (0)
• Hood Insulation - Klaus 01:53:57 02/25/03 (3)
  • Re: Hood Insulation - Robert Bondi 02:31:32 02/25/03 (2)
    • Scroll below for my reply to the same question (nt - Lenny D. 11:51:13 02/25/03 (1)
      • Re: Scroll below for my reply to the same question (nt - Klaus Bertram 10:34:22 02/26/03 (0)
• Bav Auto Wires - Dan Lafley 01:20:07 02/25/03 (0)
• Brake pads - Nath in Tassie 23:11:50 02/24/03 (1)
  • Re: Brake pads - Cristian in Sydney 23:18:08 02/24/03 (0)
• 320i runners help the 3.5 M90 218hp euro motor? - Roe Patterson 22:46:50 02/24/03 (4)
  • Re: 320i runners help the 3.5 M90 218hp euro motor? - karl sisson 10:19:54 02/25/03 (1)
    • Re: 320i runners help the 3.5 M90 218hp euro motor? - Peter Florance 15:41:07 02/25/03 (0)
  • I wouldn't do it... - Eric Q 01:30:01 02/25/03 (1)
    • agreed - Peter Florance 06:02:17 02/25/03 (0)
• egr sensor light - matt 18:47:54 02/24/03 (1)
  • Re: egr sensor light - Klaus 00:02:56 02/25/03 (0)
• sunroof issues... please help - Jeff C 17:57:08 02/24/03 (5)
  • Re: sunroof issues... please help - 3.5cs 21:53:44 02/24/03 (0)
  • Re: sunroof issues... please help - David B 21:04:30 02/24/03 (1)
    • Thank you -- I will try all the ideas. - Jeff C 09:42:38 02/25/03 (0)
  • Patience... - Karl in KS 18:35:59 02/24/03 (1)
    • Thank you for the words, but I need a little more - Jeff C 19:59:13 02/24/03 (0)
• Moving to portsmouth NH! - Matt C 17:38:56 02/24/03 (0)
• BMW Truck! - Nick, CO 16:23:57 02/24/03 (0)
• E12 vs E28 - BillW 15:17:16 02/24/03 (32)
  • Weight and stiffness - David B 23:46:34 02/25/03 (1)
    • E12 M535i 112 lb lighter than E28 - james 01:54:17 02/26/03 (0)
  • You guys really love your e12s but the reality is - TCD 12:20:57 02/25/03 (19)
    • The case for the defense...(very long, Your Honour - Remy Davison 08:07:45 02/26/03 (0)
    • it's really personal preference... - ...tom 17:07:36 02/25/03 (0)
    • Re: You guys really love your e12s but the reality is - Kristopher Barrett 16:29:03 02/25/03 (4)
      • Are you sure the e28 is heavier? - TCD 16:42:51 02/25/03 (3)
        • At some point - Peter Florance 17:58:46 02/25/03 (0)
        • Re: Are you sure the e28 is heavier? - Frank H 17:01:04 02/25/03 (1)
          • That seems about right. Euro e28s are similar. - TCD 17:02:20 02/25/03 (0)
    • Re: You guys really love your e12s but the reality is - Frank H 15:19:03 02/25/03 (3)
      • How about either of your B7s vs my e28? - TCD 15:45:02 02/25/03 (2)
        • Re: How about either of your B7s vs my e28? - Frank H 17:01:58 02/25/03 (1)
          • Awesome! - TCD 17:03:11 02/25/03 (0)
    • true but - Peter Florance 13:50:22 02/25/03 (7)
      • Re: true but - Nath in Tassie 22:38:28 02/25/03 (0)
      • Re: true but - TCD 13:59:04 02/25/03 (5)
        • Re: true but - Peter Florance 14:09:35 02/25/03 (1)
          • correction - Peter Florance 14:10:55 02/25/03 (0)
        • Don't come crying to me when... - Eric Q 14:05:24 02/25/03 (2)
          • No I didn't see that? Was it recently? - TCD 14:21:15 02/25/03 (1)
            • Yeah... - Eric Q 18:09:49 02/25/03 (0)
  • Better Overall Balance - John in Simi Valley 23:34:06 02/24/03 (0)
  • E28 softened up for the masses - Lars Olbimmerguy 22:22:23 02/24/03 (0)
  • Re: E12 vs E28 - Peter Florance 15:47:46 02/24/03 (7)
    • E12 vs E28 M5 brakes? - Tim G in Central NJ 09:23:44 02/25/03 (1)
      • M5 brakes - Peter Florance 21:42:09 02/25/03 (0)
    • Re: E12 vs E28 - Karl in KS 18:38:22 02/24/03 (4)
      • LOL! So true!! nt - Scott 19:54:05 02/24/03 (3)
        • Newer is not better - BillW 09:48:12 02/25/03 (2)
          • Don't forget E9! nt - Remy Davison 08:17:05 02/26/03 (1)
            • thats a good one....nt - Scott 11:14:27 02/26/03 (0)
• Top speed in 75 528??? - Nath in Tassie 22:51:02 02/23/03 (6)
  • Re: Top speed in 75 528??? - Jim Hineline 08:04:46 02/24/03 (0)
  • Re: Top speed in 75 528??? - Remy Davison 07:51:24 02/24/03 (3)
    • Agreed with speedo - John in Simi Valley 14:38:30 02/24/03 (2)
      • Re: Agreed with speedo - Kristopher Barrett 18:37:10 02/24/03 (0)
      • speedo "adjustment" - Andrew 14:46:14 02/24/03 (0)
  • Re: Top speed in 75 528??? - Niklas Edlund 05:30:43 02/24/03 (0)
• It is and it isn't OT... Party at the shop.... - Lars Olbimmerguy 19:57:32 02/23/03 (2)
  • Re: It is and it isn't OT... Party at the shop.... - justin webster 23:22:06 02/23/03 (1)
    • Re: It is and it isn't OT... Nigerian Scams - Mike in Chicago 14:36:21 02/24/03 (0)
• Carpet padding - Alan V 19:47:12 02/23/03 (2)
  • Brown Bread (link) - Dave D 08:00:29 02/24/03 (1)
    • Re: Brown Bread (link) - Alan V 10:16:18 02/24/03 (0)
• asas - asas 18:49:35 02/23/03 (4)
  • Nooo .. That's not right... It's just one "a" - Lars Olbimmerguy 19:50:04 02/23/03 (3)
    • Lars Olbimmerguy....I like the name. (nt) - justin webster 22:01:37 02/23/03 (2)
      • Yeah... Until you meet me, you can ponder - Lars Olbimmerguy 22:44:29 02/23/03 (1)
        • Re: Yeah... Until you meet me, you can ponder - justin webster 23:13:44 02/23/03 (0)
• Selling my E12, thanks for all the help guys... - Jordan Angle 18:23:27 02/23/03 (3)
  • Re: Selling my E12, thanks for all the help guys... - Pete Young 21:15:08 02/24/03 (1)
    • Re: Selling my E12, thanks for all the help guys.. - Jordan Angle 23:53:38 02/24/03 (0)
  • Re: Selling my E12, thanks for all the help guys... - Kaveman 19:24:24 02/23/03 (0)
• dead battery - justin webster 15:37:19 02/23/03 (2)
  • ...My problem is not a dead battery... - justin webster 23:11:25 02/23/03 (1)
    • sounds like wat i had (stil have) - Andrew 14:49:24 02/24/03 (0)
• L-Jet FI conversion auction ends today...anyone??? - Ryan Bryan 12:49:09 02/23/03 (5)
  • I agree with Tulsa Dave.... - Lars Olbimmerguy 14:34:02 02/23/03 (3)
    • Re: I agree with Tulsa Dave.... - Ryan Bryan 18:53:33 02/23/03 (2)
      • What is your secret Ryan ??? - Derek 09:23:29 02/24/03 (1)
        • what I did - Robert Bondi 22:11:40 02/24/03 (0)
  • Looks like you've got some bids... - Tulsa Dave 14:27:55 02/23/03 (0)
• Smog Day Results (maybe a bit long...) - Kaveman 12:02:39 02/23/03 (1)
  • Re: Smog Day Results (maybe a bit long...) - Christian oak,ca 12:38:10 02/24/03 (0)
• Frank H. TT progress report. - TCD 10:06:04 02/23/03 (0)
• Hoses to and from aux air valve - Alan V 21:12:38 02/22/03 (2)
  • Re: Hoses to and from aux air valve - Robert Bondi 00:32:53 02/23/03 (0)
  • aux air valve faq - Peter Florance 22:13:01 02/22/03 (0)
• Family Photo - ChuckNC 18:03:26 02/22/03 (2)
  • Chuck, is that the resprayed Bav? - Remy Davison 08:09:22 02/24/03 (1)
    • Re: Chuck, is that the resprayed Bav? - ChuckNC 10:51:58 02/24/03 (0)
• soft suspension - RegB 16:53:08 02/22/03 (5)
  • Re: soft suspension - Eric Q 19:50:49 02/24/03 (0)
  • Re: soft suspension - Peter Florance 07:02:07 02/23/03 (2)
    • what tire pressures are you running? eom - stewart gilmore 11:00:53 02/23/03 (1)
      • Re: what tire pressures are you running? eom - Peter Florance 15:58:36 02/23/03 (0)
  • Re: soft suspension - Ryan Bryan 20:33:51 02/22/03 (0)
• WWWBoard Enhancement - Troy Rudolph (Webmaster) 14:49:56 02/22/03 (0)
• Test Message 2 - Troy Rudolph (Webmaster) 14:45:56 02/22/03 (0)
• ? Timing Mark for 528i - Phil 12:16:44 02/22/03 (1)
  • newbie FAQ - Peter Florance 22:10:51 02/22/03 (0)
• Anyone have spare injectors for 81 528i? - Brad In Texas 11:26:50 02/22/03 (7)
  • Re: Anyone have spare injectors for 81 528i? - Jim Davis 20:17:31 02/22/03 (5)
    • Re: Anyone have spare injectors for 81 528i? - pumpkin 11:52:36 02/25/03 (1)
      • really? - Peter Florance 18:15:25 02/25/03 (0)
    • Re: Anyone have spare injectors for 81 528i? - Brad In Texas 20:40:25 02/22/03 (2)
      • Re: Anyone have spare injectors for 81 528i? - Jim Davis 23:07:30 02/22/03 (1)
        • Re: Anyone have spare injectors for 81 528i? - Brad In Texas 17:40:54 02/27/03 (0)
  • Brad, You've got mail. - John in Simi Valley 17:44:36 02/22/03 (0)
• B&G Springs Supplier - Alex Lugo 10:28:09 02/22/03 (2)
  • Re: B&G Springs Supplier - Ryan Bryan 12:49:09 02/22/03 (1)
    • Re: B&G Springs Supplier - Alex Lugo 15:56:17 02/22/03 (0)
• HEY SAM!!!! call me please - Jeff C 21:21:56 02/21/03 (1)
  • I will NOT eat green eggs and ham :o) - Sam 20:12:29 02/22/03 (0)
• the clutch (again) - justin webster 18:29:29 02/21/03 (2)
  • Re: the clutch (again) - Peter Florance 18:31:22 02/21/03 (1)
    • Re: the clutch (again) - justin webster 23:31:22 02/21/03 (0)
• Looking for muffler - Doug S. 18:28:02 02/21/03 (6)
  • hey doug, i'm in los osos, where are you? - billy in San Luis Obispo, CA aka SLO 02:33:01 02/23/03 (2)
    • Billy in Los Osos I'm in Grover Beach!! eom - Doug S. 06:56:41 02/24/03 (1)
      • cool, sent you an email. eom - billy 12:33:27 02/24/03 (0)
  • Re: Looking for muffler - John in Simi Valley 07:22:13 02/22/03 (0)
  • Re: Looking for muffler - will ollison 22:32:28 02/21/03 (0)
  • I'm near San Luis Obispo in Calif. BTW eom - Doug S. 18:29:06 02/21/03 (0)
• Test Message - Troy Rudolph (Webmaster) 16:14:26 02/21/03 (1)
  • eh? nt - justin webster 17:28:43 02/21/03 (0)
• BMP adj. cam sprocket? - billy in SLO 11:25:41 02/21/03 (1)
  • Re: BMP adj. cam sprocket? - Frank H 16:07:02 02/21/03 (0)
• Engine stumbles at idle - Phil 10:07:19 02/21/03 (3)
  • Re: Engine stumbles at idle - Klaus 10:27:38 02/21/03 (2)
    • ...in addition to above... - Lenny D. 12:17:53 02/21/03 (1)
      • Re: ...in addition to above... - Klaus 18:22:28 02/21/03 (0)
• Engine Fan - Dan of The Lafleys 02:12:22 02/21/03 (10)
  • Re: Engine Fan - Klaus 10:13:13 02/21/03 (2)
    • Re: Engine Fan - Jamie Seattle 13:44:05 02/21/03 (1)
      • Re: Engine Fan - Klaus 18:21:18 02/21/03 (0)
  • Engine Fan , , , , , , , - Jefflee 07:44:58 02/21/03 (1)
    • The Good Land of France.....NT - Dan Lafley 11:22:55 02/21/03 (0)
  • No , don't glue it ! - Niklas Edlund 06:17:08 02/21/03 (2)
    • Actually, the fan clutch is hydraulic, I believe.. - Scott 16:41:55 02/21/03 (1)
      • It depends - Mike W. 21:10:11 02/21/03 (0)
  • BTW - Dan of The Lafleys 02:19:00 02/21/03 (1)
    • You will get irregular engine temperature ... - Niklas Edlund 05:00:06 02/24/03 (0)
• 530i fs...still - Random_87_5351s 23:43:17 02/20/03 (0)
• Last Chance.... - Kaveman 23:24:24 02/20/03 (0)
• fIRSTfIVES west coast meet...when? - billy in SLO 15:28:17 02/20/03 (6)
  • Dont forget San Diego March 15-16 - Jeff F 22:05:11 02/20/03 (0)
  • Input guys... - Eric Q 15:59:56 02/20/03 (4)
    • Re: Input guys... - Uhh, . . I dunno 'bout that 00:05:33 02/21/03 (1)
      • Then again, I might talk my boys into . . . - John in Simi Valley 00:07:34 02/21/03 (0)
    • that could be very cool... - billy 16:06:15 02/20/03 (1)
      • Sharkfest - E12 West sounds great - Peter Claassen 19:25:59 02/20/03 (0)
• Revisit...Rust around the F/B glass - Lenny D. 13:59:09 02/20/03 (2)
  • Re: Revisit...Rust around the F/B glass - Peter Florance 05:50:13 02/21/03 (0)
  • Re: Revisit...Rust around the F/B glass - stewart 16:30:26 02/20/03 (0)
• Passing on some Mid-West info - ChuckNC 13:26:55 02/20/03 (0)
• If you've never seen a new E12 in a showroom... - Remy Davison 09:18:59 02/20/03 (2)
  • That is pretty cool - JR 08:20:37 02/21/03 (0)
  • Thats the baddest.... - Scott 23:58:27 02/20/03 (0)
• ebay item... - justin webster 09:06:27 02/20/03 (9)
  • His other auctions have some interesting stuff. - Lars Bend Or 23:13:08 02/20/03 (1)
    • I sent him an email... - Tulsa Dave 09:56:31 02/21/03 (0)
  • it's an e24 cluster - ...tom 09:35:18 02/20/03 (5)
    • picture changed, it's an 80 mph e12 cluster - ...tom 17:15:02 02/20/03 (4)
      • Re: picture changed, it's an 80 mph e12 cluster - Kristopher Barrett 18:21:49 02/20/03 (3)
        • Yep... that still ain't right... - Tulsa Dave 18:35:06 02/20/03 (2)
          • Looks like an E12 cluster now.... - Frank H 20:07:26 02/20/03 (1)
            • NOW it's right... - Tulsa Dave 20:21:35 02/20/03 (0)
  • Re: ebay item... - justin webster 09:12:26 02/20/03 (0)
• GUYS! Im not selling, enough w/the emails.... - Scott 22:25:45 02/19/03 (7)
  • PAUL!!!! - Dan Lafley 11:54:05 02/20/03 (1)
    • Yeah, I know what happened.. - Scott 17:36:51 02/20/03 (0)
  • Western Washington University - Peter Florance 06:13:00 02/20/03 (1)
    • Re: Western Washington University - Dan Lafley 11:36:33 02/20/03 (0)
  • that's too much! - Robert Bondi 00:56:09 02/20/03 (0)
  • No really, Scott.....maybe you should sell.... - Dave D 22:42:58 02/19/03 (0)
  • You're a POPULAR Guy, Mr. Scott , , , , , - Jefflee 22:36:53 02/19/03 (0)
• Exhaust manifold - Nath in Tassie 21:42:51 02/19/03 (7)
  • do what?!?!? - ChuckNC 13:31:19 02/20/03 (2)
    • Re: Spitting the dummy! - Nath in Tassie 22:56:22 02/20/03 (1)
      • OOOOH! Pitching a Hissy Fit... Gotcha! - Lars Bend Or 23:14:46 02/20/03 (0)
  • Re: Exhaust manifold - mikey 23:50:54 02/19/03 (0)
  • Re: Exhaust manifold - Al from Oz 22:29:47 02/19/03 (0)
  • Re: Exhaust manifold - Matt C 21:51:30 02/19/03 (1)
    • Re: Exhaust manifold is fixed! - Nath in Tassie 22:58:47 02/20/03 (0)
• Questions about brakes and master cyl? - Ryan Bryan 20:29:49 02/19/03 (7)
  • Have '86 325es and , , , , - Jefflee 22:44:40 02/19/03 (2)
    • Re: Have '86 325es and , , , , - Ryan Bryan 23:17:36 02/19/03 (1)
      • I'm selling my '3', too. Nothing but '5's left , - Jefflee 08:58:20 02/20/03 (0)
  • Re: Questions about brakes and master cyl? - Peter Claassen 20:50:28 02/19/03 (2)
    • Re: Questions about brakes and master cyl? - Ryan Bryan 21:57:02 02/19/03 (1)
      • THANKS for the EGO plug..... - Beamher Bob 09:06:54 02/20/03 (0)
  • Re: Questions about brakes and master cyl? - Lenny D. 20:41:59 02/19/03 (0)
• Front and Rear Windshield Gaskets - Tara Knowles 19:38:59 02/19/03 (9)
  • Re: Front and Rear Windshield Gaskets - greghill 21:24:02 02/21/03 (0)
  • Re: Front and Rear Windshield Gaskets - Ryan Bryan 20:21:06 02/19/03 (5)
    • Where do you get it? - Tara Knowles 20:30:50 02/19/03 (4)
      • Re: Where do you get it? - Ryan Bryan 20:36:58 02/19/03 (3)
        • I just had mine done in conjunction w/windshield - billy in SLO 14:17:22 02/20/03 (2)
          • Awwww shucks... - Tara Knowles 15:26:29 02/20/03 (1)
            • 10-4 good buddy(budette?)... - billy 15:33:30 02/20/03 (0)
  • Risky... a bit. If you go to a glass shop and - Lars Bend Or 19:53:18 02/19/03 (1)
    • Hey Lars - Randy M 07:36:00 02/20/03 (0)
• Maximillan heads - Matt C 15:33:50 02/19/03 (5)
  • Re: BMW remans - David B 01:25:12 02/20/03 (0)
  • My 2 cents worth - Peter Claassen 20:33:17 02/19/03 (2)
    • Re: My 2 cents worth - Matt C 21:10:22 02/19/03 (1)
      • good deal to me - Peter Florance 06:31:03 02/20/03 (0)
  • Re: Maximillan heads - Frank H 15:55:10 02/19/03 (0)
• Is this E12 list just American or Australian to ?? - Niklas Edlund 10:09:34 02/19/03 (7)
  • Only if you agree to....... - Aaron 07:00:30 02/20/03 (0)
  • Welcome - Troy Rudolph (Webmaster) 11:31:09 02/19/03 (0)
  • all e12's welcome - Peter Florance - First Fives Dictator for Life 10:20:06 02/19/03 (4)
    • OK , Thanks ! Any questions ? - Niklas Edlund 05:19:42 02/20/03 (3)
      • broken link ... heres the right picture ! - Niklas Edlund 05:34:43 02/20/03 (2)
        • Re: broken link ... heres the right picture ! - justin webster 08:43:26 02/20/03 (1)
          • Broke doesn't mean you cant enhance the car. - Niklas Edlund 10:57:55 02/20/03 (0)
• hot foot repaired! - rick 08:24:10 02/19/03 (1)
  • Re: hot foot repaired! - justin webster 08:38:00 02/19/03 (0)
• Airflow Meter Adjustment - Todd 00:00:26 02/19/03 (12)
  • Re: Airflow Meter Adjustment - Peter Florance 06:32:53 02/19/03 (11)
    • clockwise or counter - Todd 11:58:12 02/19/03 (6)
      • AFM adjustment...(longish) - Lenny D. 13:51:28 02/19/03 (5)
        • Re: AFM adjustment...(longish) - Todd 16:06:26 02/19/03 (1)
          • Re: AFM adjustment...(longish) - Peter Florance 17:35:00 02/19/03 (0)
        • O2 readings - Chris Hollis, Huntsville, AL 14:57:35 02/19/03 (2)
          • No, disconnected for adjustment... - Lenny D. 17:55:44 02/19/03 (1)
            • Thanks.......... - Chris Hollis 19:12:51 02/19/03 (0)
    • Thanks, Peter..... - Lenny D. 11:13:02 02/19/03 (0)
    • Re: Airflow Meter Adjustment - Todd 09:27:37 02/19/03 (2)
      • It's Fixed!!! - Todd 21:15:48 02/19/03 (1)
        • one thing to check (fuel pump) - Peter Florance 06:33:12 02/20/03 (0)
• Clutch hose wins the first bout... - justin webster 22:54:10 02/18/03 (7)
  • Demonic clutch fittings - Peter Claassen 20:42:15 02/19/03 (0)
  • Re: Clutch hose wins the first bout... - ChuckNC 09:32:33 02/19/03 (0)
  • Pipe is part of Hose? - Peter Florance 06:23:09 02/19/03 (4)
    • Re: Pipe is part of Hose? - justin webster 08:16:03 02/19/03 (3)
      • no it doesn't come with it - Peter Florance 09:56:45 02/19/03 (2)
        • My '80 has a short metal bent "L"..... - Lenny D. 11:37:29 02/19/03 (1)
          • Believe mine (1980) was like that too.....(M) - JB in Boise 15:07:50 02/19/03 (0)
• Just saw this car today ---- - John in Simi Valley 22:40:32 02/18/03 (8)
  • Rust around the winshield gasket. - Bill Bowes 17:18:10 02/19/03 (3)
    • Fix with Vengence - John in Simi Valley 14:50:05 02/20/03 (0)
    • Sheepishly asking... - Lenny D. 18:01:25 02/19/03 (1)
      • Asking around -- - John in Simi Valley 07:40:27 02/22/03 (0)
  • Hey man... You hit a weak spot... AS you may know - Lars Bend Or 00:13:14 02/19/03 (3)
    • Yep, Fix the AFM and it'll run from Ca to NY - John in Simi Valley 00:57:17 02/19/03 (0)
    • HMMMM???? Just how british does she sound... - Lars... Bend OR 00:14:52 02/19/03 (1)
      • British enough to . . . - John in Simi Valley 00:40:33 02/19/03 (0)
• oil level indicator - Peter Mooney 20:38:38 02/18/03 (2)
  • Just to drive you nuts >>> - Lars Bend Or 22:32:59 02/18/03 (0)
  • Just to drive you nuts >>> - Lars Bend Or 22:32:40 02/18/03 (0)
• Rotor button - Nath in Tassie 20:36:58 02/18/03 (3)
  • Re: Rotor button - James from New Zealand 22:26:33 02/18/03 (2)
    • James in NZ - Nath in Tassie 23:26:39 02/18/03 (1)
      • Forget the Rev Limited Version - Matt B 00:46:53 02/20/03 (0)
• oil pressure temperature sender location - Peter Mooney 20:34:49 02/18/03 (2)
  • Re: oil pressure temperature sender location - Karl in KS 23:45:47 02/22/03 (0)
  • Re: oil pressure temperature sender location - Cristian in Sydney - Oz 21:18:55 02/18/03 (0)
• Input on the 1988 735 I L ??? - Jim Hartwell from Olympia, WA 20:04:09 02/18/03 (9)
  • TANKS FOR THE INPUT :-) - Jim Hartwell from Olympia, WA 20:45:41 02/19/03 (0)
  • run away! - ...tom 08:29:17 02/19/03 (0)
  • had an 88 735i kinda long list of probs - stewart 03:55:34 02/19/03 (0)
  • Wrong Call on the 88 I think guys???? - Lars Bend Or 22:38:20 02/18/03 (1)
    • You are correct sir... - Tulsa Dave 07:17:58 02/19/03 (0)
  • As the owner of an '85 E23... - Tulsa Dave 20:56:32 02/18/03 (0)
  • Heat and AC - Peter Florance 20:20:26 02/18/03 (2)
    • Re: Heat and AC - Jim Hartwell 20:34:01 02/18/03 (1)
      • Re: Heat and AC - Peter Florance 06:35:08 02/19/03 (0)
• Input on the 1988 735 I L ??? - Jim Hartwell from Olympia, WA 20:02:50 02/18/03 (1)
  • Re: Input on the 1988 735 I L ??? - Jim Hartwell from Olympia, WA 20:25:03 02/18/03 (0)
• E12 sighting in Houston today - JR --- 1978 635CSi 13:56:15 02/18/03 (1)
  • not me, but I live in Houston - Robert Bondi 23:42:58 02/18/03 (0)
• Good-Bye E12 - Scott 13:17:46 02/18/03 (8)
  • Yo !! Who's IP is this??? - The real Scott! 19:32:33 02/19/03 (1)
    • AHHAAAA!!!! - The Real Scott 19:52:29 02/19/03 (0)
  • THATS NO ME! OR MY IP!!!! WTF???? - The Real SCOTT!!! WTF is going on???? 19:26:10 02/19/03 (0)
  • They all cost and they all make us tear our - Lars Bend Or 18:00:26 02/18/03 (1)
    • So true... every car I own is never done - Frank H 19:25:31 02/18/03 (0)
  • Dude...wait a minute..... - Dave D 17:15:45 02/18/03 (0)
  • So what are you getting to replace it with? - Frank H 15:57:32 02/18/03 (0)
  • Make up you mind already!! - TCD 14:09:13 02/18/03 (0)
• couple of questions - billy in SLO 11:42:37 02/18/03 (1)
  • Hood insulation... - Lenny D. 12:48:15 02/18/03 (0)
• the clutch hose - justin webster 09:07:04 02/18/03 (1)
  • disconnect the brake pedal, - ...tom 09:59:07 02/18/03 (0)
• Euro Bumpers? - Justin Bartimioli 01:17:33 02/18/03 (4)
  • Re: Euro Bumpers? - Randy M 10:01:47 02/18/03 (2)
    • YIKES! $2,000?! - Nick, CO 05:27:52 02/20/03 (0)
    • Randy.. The white Saab 96 in Bend Or is for Sale - Lars 11:39:50 02/18/03 (0)
  • Scott wants to know, "How Hot" ??? - Jefflee 09:18:11 02/18/03 (0)
• GALLERY - Cliff 00:49:46 02/18/03 (2)
  • Are you Cliff Robb? - Troy Rudolph 08:26:04 02/18/03 (1)
    • Re: Are you Cliff Robb? - Cliff 22:42:06 02/18/03 (0)
• REAR DISC BRAKES - Cliff 19:41:50 02/17/03 (6)
  • either way - Peter Florance 19:58:18 02/17/03 (5)
    • Re: either way - Cliff 00:31:52 02/18/03 (1)
      • good (more) - Peter Florance 06:31:11 02/18/03 (0)
    • M6=6mm M8=8mm, Both hex head, but - Barry Mabery 21:16:06 02/17/03 (2)
      • Re: M6=6mm M8=8mm, Both hex head, but - Cliff 00:38:27 02/18/03 (1)
        • m6 is the threads - Peter Florance 06:29:19 02/18/03 (0)
• Chrome power mirror disassembly - Mike W. 16:38:49 02/17/03 (7)
  • Re: Chrome power mirror disassembly - Dusan Vacval 12:54:47 02/18/03 (6)
    • Yes, that would be great - Mike W. 00:31:30 02/19/03 (2)
      • Re: Yes, that would be great - Dusan Vacval 12:25:36 02/19/03 (1)
        • Address - Mike W. 00:12:12 02/20/03 (0)
    • Re: Chrome power mirror disassembly in Tech FAQ? - Brian in Montreal 20:32:52 02/18/03 (2)
      • Re: Chrome power mirror disassembly in Tech FAQ? - Dusan Vacval 12:33:30 02/19/03 (0)
      • I would vote for that option... - Tulsa Dave 20:59:57 02/18/03 (0)
• cat. contverter & front wheel bearings? - BIGERIK 16:25:39 02/17/03 (1)
  • Pelican Parts for bearings - Peter Florance 18:43:40 02/17/03 (0)
• disconnected wires - Peter Mooney 15:12:05 02/17/03 (1)
  • Re: disconnected wires - Mike W. 16:26:41 02/17/03 (0)
• eBay item... - Lenny D. 15:03:29 02/17/03 (14)
  • I think I've seen them - Mike W. 16:22:53 02/17/03 (9)
    • Re: I think I've seen them - Frank H 17:38:08 02/17/03 (8)
      • And the answer is ............. (image) - Adam Wilson 23:45:29 02/17/03 (3)
        • Probably to measure the minutes to 60 (90K) rather - Lars Bend Or 23:08:57 02/18/03 (0)
        • That car has no red-line !!! nt - Jefflee 09:20:29 02/18/03 (0)
        • There you GO!!!!! Thanks.... - Yeros 09:19:08 02/18/03 (0)
      • Since I have a tach sitting in front of me... - Tulsa Dave 22:01:10 02/17/03 (3)
        • will it fit in speedo hole? (nt) - greghill-phx,az 23:21:46 02/17/03 (2)
          • No... - Yeros 09:19:24 02/18/03 (0)
          • Re: will it fit in speedo hole? (nt) - justin webster 08:15:30 02/18/03 (0)
  • Re: eBay item... - Barry Mabery 16:05:41 02/17/03 (0)
  • Re: eBay item... - Frank H 15:21:02 02/17/03 (2)
    • Yes , it's a E12 518 or 518i clock ! - Niklas Edlund 10:58:55 02/18/03 (1)
      • Re: Yes , it's a E12 518 or 518i clock and 520 - pumpkin 18:06:03 02/18/03 (0)
• Further diagnostic questions - Peter Mooney 15:03:28 02/17/03 (1)
  • Re: Further diagnostic questions - Mike W. 16:30:18 02/17/03 (0)
• Valuation prices and stuff - Cristian In Sydney -OZ 14:32:12 02/17/03 (2)
  • Re: Valuation prices and stuff - Frank H 15:15:44 02/17/03 (0)
  • Alpina Wheels - Troy Rudolph 15:08:06 02/17/03 (0)
• Heads up for a trip out west. - Jeff C 12:45:05 02/17/03 (1)
  • Re: Heads up for a trip out west. - Kaveman 13:14:43 02/17/03 (0)
• FS (not mine) '81 528i in SF south bay - Christian oak,ca 12:00:32 02/17/03 (2)
  • any idea of its condition? - ...tom 13:40:00 02/17/03 (1)
    • Re: I looked at it yesterday - mark 20:51:17 02/17/03 (0)
• 2.8 -> X.x - justin webster 08:51:13 02/17/03 (2)
  • Re: 2.8 -> X.x - Frank H 09:30:07 02/17/03 (1)
    • Right, sort of - Mike W. 23:08:44 02/17/03 (0)
• E-12 and E-28 M30 engine/Head several Q?s - Aaron 04:35:53 02/17/03 (5)
  • Re: E-12 and E-28 M30 engine/Head several Q?s - Cristian In Sydney 14:23:33 02/17/03 (4)
    • Re: E-12 and E-28 M30 engine/Head several Q?s - Aaron 05:27:39 02/18/03 (3)
      • Aaron, did you buy this one? - Remy Davison 10:13:12 02/18/03 (2)
        • Thats the one! - Aaron 06:00:19 02/19/03 (1)
          • Re: Thats the one! - Remy Davison 07:13:23 02/19/03 (0)
• Main Bearing size in 3.5 Motronic? - Zolka 02:10:13 02/17/03 (0)
• Creaky rear door? - Eric Q 22:44:14 02/16/03 (4)
  • Re: Creaky rear door? - Mike W. 23:15:29 02/17/03 (0)
  • Re: Creaky rear door? - Peter Florance 05:51:36 02/17/03 (0)
  • Re: Creaky rear door? - greghill 23:40:00 02/16/03 (0)
  • Re: Creaky rear door? - Jefflee 22:49:52 02/16/03 (0)
• Atl guys, great time, need to do it again... - Scott 22:41:00 02/16/03 (2)
  • All is well in Atlanta, again !! What fun w/BMWs. - Jefflee 23:06:38 02/16/03 (1)
    • 'Cept when ya'll DITCHED me... - Dave D 14:12:48 02/17/03 (0)
• West Coast First Five Fest...where? - Eric Q 22:39:27 02/16/03 (21)
  • SLO works for me ! - Peter Claassen 10:23:59 02/18/03 (0)
  • Re: West Coast First Five Fest...where? - Cliff 00:46:45 02/18/03 (0)
  • SLO sounds good to me (Duh) - billy in San Luis Obispo, CA aka SLO 13:08:32 02/17/03 (2)
    • Not a big deal, really - Eric Q 16:34:40 02/17/03 (1)
      • 10-4, got plenty of those. - billy in SLO 10:47:52 02/18/03 (0)
  • Just a rib folks... Naturally it makes more sense> - Lars Bend Or 12:19:59 02/17/03 (7)
    • Save your $$$ for the trip to S.C. Lars... - Tulsa Dave 15:02:08 02/17/03 (6)
      • Re: Save your $$$ for the trip to S.C. Lars... - Frank H 09:04:39 02/18/03 (4)
        • fly out to Jim's - Peter Florance 16:45:24 02/21/03 (0)
        • That's why you have to start saving now! - Tulsa Dave 21:10:21 02/18/03 (2)
          • Re: That's why you have to start saving now! - Frank H 21:50:44 02/18/03 (1)
            • I completely understand... - Tulsa Dave 07:15:40 02/19/03 (0)
      • I Second this 'extreme motion' (west to east). - Jefflee 21:40:14 02/17/03 (0)
  • Re: West Coast First Five Fest...where? - Mike W. 23:48:35 02/16/03 (0)
  • Uuuuh??? Three more states on the West Coast - Lars Bend Or 23:31:10 02/16/03 (6)
    • Re: Uuuuh??? Three more states on the West Coast - Kaveman 10:25:18 02/17/03 (0)
    • Re: Uuuuh??? Three more states on the West Coast - Frank H 09:28:10 02/17/03 (0)
    • Touchy, Lars? - Eric Q 00:09:08 02/17/03 (1)
      • Jest kiddin around. Actuallly the migration - Lars 12:15:00 02/17/03 (0)
    • The difference between median and average - Mike W. 23:41:15 02/16/03 (1)
      • not for me it isnt! - mikey 09:23:17 02/17/03 (0)
• need passenger window - greghill-phx,az 21:13:16 02/16/03 (2)
  • Re: need passenger window - Mike W. 23:56:51 02/16/03 (1)
    • $108 dealer, 4 day deliv. - greghill 11:57:29 02/17/03 (0)
• Actung Christian! - Al from Oz 20:19:15 02/16/03 (1)
  • Re: Actung Christian! - Cristian In Sydney 14:14:07 02/17/03 (0)
• Paging ...tom - Peter Florance 18:22:41 02/16/03 (1)
  • wilmington, 90 min north - ...tom 20:10:06 02/16/03 (0)
• What should be done two a car that sat a while - Ryan 18:03:37 02/16/03 (1)
  • Be careful on that empty tank..... - Lars Bend Or 18:31:57 02/16/03 (0)
• It's alive!! - Peter Mooney 17:35:12 02/16/03 (9)
  • Re: It's alive!! - Joe 20:20:22 02/16/03 (1)
    • Re: It's alive!! - Peter Mooney 15:06:11 02/17/03 (0)
  • Re: It's alive!! - Peter Florance 18:21:41 02/16/03 (4)
    • Re: It's alive!! - Peter Mooney 15:01:10 02/17/03 (1)
      • 106? - Peter Florance 20:29:50 02/17/03 (0)
    • advance - Lou in Denver 19:27:44 02/16/03 (1)
      • distributor centrifugal advance range - Peter Florance 21:02:27 02/17/03 (0)
  • Re: It's alive!! - Jamie from Seattle 17:56:50 02/16/03 (0)
  • Re: It's alive!! - Kaveman 17:49:51 02/16/03 (0)
• Scott J wins the riddle of the day contest! - Matt C 16:46:28 02/16/03 (1)
  • Re: Scott J wins the riddle of the day contest! - justin webster 18:40:22 02/16/03 (0)
• anybody w/ rear springs? - stewart 16:39:38 02/16/03 (2)
  • Re: anybody w/ rear springs? - pumpkin 20:42:28 02/18/03 (0)
  • Re: anybody w/ rear springs? - pumpkin 18:35:25 02/18/03 (0)
• Riddle of the day....... - Matt C 13:26:07 02/16/03 (6)
  • Re: Riddle of the day....... - ScottJ 16:20:57 02/16/03 (0)
  • Re: Riddle of the day....... - justin webster 14:32:25 02/16/03 (0)
  • sunroof opened just a wee bit... - kevin kew 13:32:25 02/16/03 (3)
    • Re: sunroof opened just a wee bit... - Matt C 14:18:14 02/16/03 (2)
      • bad door seals. - kevin kew 16:05:59 02/16/03 (1)
        • Re: bad door seals. - Matt C 16:16:26 02/16/03 (0)
• The story of Good Sir Knight Webster (long) - justin webster 12:26:20 02/16/03 (6)
  • Life with Fritz (81 528 w/ 3.5) - Peter C;laassen 15:19:36 02/16/03 (1)
    • Re: Life with Fritz (81 528 w/ 3.5) - justin webster 15:40:19 02/16/03 (0)
  • Check hose routing - Mike W. 13:05:50 02/16/03 (1)
    • Re: Check hose routing - justin webster 13:14:27 02/16/03 (0)
  • Re: The story of Good Sir Knight Webster (long) - Kaveman 12:33:26 02/16/03 (1)
    • Re: The story of Good Sir Knight Webster (long) - justin webster 12:58:16 02/16/03 (0)
• wiring diagram - andre domingo 07:20:28 02/16/03 (1)
  • Re: wiring diagram - Peter Florance 10:29:10 02/16/03 (0)
• Well she's gone! - Collins 07:05:50 02/16/03 (0)
• the only stupid question... - ChuckNC 06:23:29 02/16/03 (0)
• Faint glow of alternator light. - Eric Q 02:53:19 02/16/03 (8)
  • Listen to Peter F. - Tom in NY 07:41:22 02/17/03 (0)
  • Re: Faint glow of alternator light. - Kaveman 10:59:39 02/16/03 (4)
    • I disagree - Mike W. 00:15:23 02/17/03 (2)
      • Re: I disagree - Kaveman 10:46:55 02/17/03 (0)
      • Re: I disagree - Peter Florance 06:22:42 02/17/03 (0)
    • Could be... - Eric Q 22:29:39 02/16/03 (0)
  • Check the elec.FAQ; make a new alt. gnd. wire (nt) - Lenny D. 03:11:03 02/16/03 (1)
    • also check overheated main (red) alt wire (nt) - Peter Florance 10:35:14 02/16/03 (0)
• 2.8 to 3.5 swap update and questions - billy in SLO 01:25:10 02/16/03 (14)
  • If you're going motronic, you need motronic - rexmo 14:14:01 02/18/03 (0)
  • 2.8 clutch is OK, but not great - Mike W. 13:11:49 02/16/03 (0)
  • Re: 2.8 to 3.5 swap update and questions - Kaveman 10:56:17 02/16/03 (4)
    • my bad, the FAQ said "e12 pan & e28 damper" but - billy in SLO 23:51:58 02/16/03 (1)
      • The damper is - Mike W. 00:42:49 02/19/03 (0)
    • A few additional thoughts - Peter Claassen 11:22:24 02/16/03 (1)
      • I have either - Peter Florance 17:22:29 02/16/03 (0)
  • i used an e12 clutch - mikey 02:32:12 02/16/03 (0)
  • the 3,5 pan wont fit? - mikey 02:28:55 02/16/03 (5)
    • 3.5 oil pan was toast, or what was left of it! - billy in SLO 23:56:14 02/16/03 (1)
      • kay clutch dumper! LOL! - mikey 14:00:44 02/17/03 (0)
    • What the??? OIL Pan question... - Scott 10:37:55 02/16/03 (2)
      • Re: What the??? OIL Pan question... - mikey 12:26:11 02/16/03 (1)
        • Re: What the??? OIL Pan question... - Scott 21:59:46 02/17/03 (0)
• Bumpers - Heino 01:18:52 02/16/03 (0)
• Atlanta guys gettin a brew Sunday @3:00pm... - Scott 22:07:56 02/15/03 (2)
  • take a picture! (nt) - ChuckNC 06:08:48 02/16/03 (1)
    • Will do....As Long as I dont leave my Camera in - Scott 10:42:07 02/16/03 (0)
• Tune up trouble - koop 20:41:18 02/15/03 (3)
  • Re: Tune up trouble - Matt C 21:54:31 02/15/03 (2)
    • sorry for the double post, - koop 00:34:06 02/16/03 (1)
      • Re: sorry for the double post, - Matt C 07:39:25 02/16/03 (0)
• wheels--- - justin webster 20:17:16 02/15/03 (5)
  • Re: wheels--- - Eric Q 01:18:09 02/16/03 (0)
  • in a nutshell lighter=better - Andrew 23:38:02 02/15/03 (0)
  • Re: wheels--- - rick 23:35:36 02/15/03 (2)
    • Actuslly I think its more like, less HP wasted.... - Scott 10:33:18 02/16/03 (1)
      • I gained 15hp with 14" rims... - Eric Q 22:31:39 02/16/03 (0)
• Bavarian autosport headers - Matt C 19:26:44 02/15/03 (0)
• Options other than reactors - Matt C 19:00:19 02/15/03 (5)
  • Re: Options other than reactors - Robert Bondi 22:15:54 02/15/03 (0)
  • Not that easy - Mike W. 20:20:21 02/15/03 (2)
    • Re: Not that easy - Matt C 07:46:09 02/16/03 (1)
      • Sorry, I thought you were in Ca. (NT) - Mike W. 13:13:31 02/16/03 (0)
  • Re: Options other than reactors - Ryan Ryan 19:37:43 02/15/03 (0)
• Anybody else watching this? - Lenny D. 17:35:20 02/15/03 (4)
  • For the price he's selling it for... - Frank H 10:51:40 02/16/03 (0)
  • We all ought to chip in to buy these and , , , , - Jefflee 22:01:29 02/15/03 (2)
    • Burning them would be ILLEGAL!!! - Scott 23:34:04 02/15/03 (1)
      • Oh , , , Sorry. Never mind. Sorry. nt - Jefflee 00:17:20 02/16/03 (0)
• Tune up trouble - koop 17:21:40 02/15/03 (2)
  • Avoid Bosch Platinum Plugs - Troy Rudolph 18:37:55 02/15/03 (0)
  • Re: Tune up trouble - Matt C 17:53:25 02/15/03 (0)
• Front springs e12 - Mike B 15:04:53 02/15/03 (0)
• 81 528i - Al Canuck 14:14:53 02/15/03 (4)
  • Thanx guys. I may go look at it today - Al Canuck 15:06:33 02/16/03 (0)
  • watch out for rust, rust and more rust - ...tom 18:20:02 02/15/03 (2)
    • The 81 w/5 OD is the Best Year - Lars 01:25:36 02/16/03 (1)
      • Ooops. Make that "owner of old bimmers" nt - Lars 01:30:09 02/16/03 (0)
• May buy project '76 520/6 - A few questions.. - Tim87635 12:13:52 02/15/03 (2)
  • Re: May buy project '76 520/6 - A few questions.. - Sam Schultz 17:35:58 02/15/03 (1)
    • Thanks, Great info! - Tim87635 06:35:31 02/16/03 (0)
• 8 MPG!!!! - Dan Lafley 03:39:00 02/15/03 (18)
  • HAH!!! THATS WHAT I GET!!!!8MPG..... - Scott 21:47:31 02/15/03 (0)
  • Also poor mileage - Brian in Abilene 20:40:27 02/15/03 (6)
    • Re: Also poor mileage - mikey 21:49:59 02/15/03 (5)
      • Re: Also poor mileage - Brian in Abilene 22:01:12 02/15/03 (4)
        • o2 sensor - Peter Florance 10:26:33 02/16/03 (1)
          • Thanks, Peter. I'll do that, too... - Brian in Abilene 13:14:44 02/16/03 (0)
        • go for it - mikey 02:20:47 02/16/03 (1)
          • Thanks. I have an '84 318i that needs valves (m) - Brian in Abilene 08:35:47 02/16/03 (0)
  • 8 MPG!!!! - Dan Lafley 12:41:20 02/15/03 (1)
    • Re: 8 MPG!!!! - Lenny D. 15:33:33 02/15/03 (0)
  • Re: 8 MPG!!!! - Peter Florance 08:01:33 02/15/03 (0)
  • Re: 8 MPG!!!! kind of long... - Matt C 07:03:15 02/15/03 (6)
    • good point... - mikey 13:48:51 02/15/03 (0)
    • Spark..... - Dan Lafley 13:07:24 02/15/03 (4)
      • dude... this info was not imparted to us - mikey 13:53:49 02/15/03 (3)
        • Re: dude... this info was not imparted to us - Matt C 16:09:54 02/15/03 (2)
          • Rebuild - Dan lafley 18:08:21 02/15/03 (1)
            • 8mm Wires from Korman - Troy Rudolph 18:34:41 02/15/03 (0)
• Bay Area Smog Day... Come On Guys.... Feb 22 in SF - Kaveman 19:34:46 02/14/03 (4)
  • Re: Bay Area Smog Day... Come On Guys.... Feb 22 in SF - Eric Q 02:58:24 02/16/03 (1)
    • Re: Bay Area Smog Day... Come On Guys.... Feb 22 in SF - Kaveman 11:02:57 02/16/03 (0)
  • Re: Bay Area Smog Day... Come On Guys.... Feb 22 in SF - John in Antioch 01:50:45 02/15/03 (1)
    • Re: Bay Area Smog Day... Come On Guys.... Feb 22 in SF - Fred Fermin (SF,CA) 10:04:15 02/15/03 (0)
• l-jet conversion kit on ebay - Ryan Bryan 17:01:01 02/14/03 (1)
  • Re: l-jet conversion kit on ebay - Frank H 11:44:50 02/15/03 (0)
• collector plates in Colorado mean no more e-test - koop 10:11:12 02/14/03 (3)
  • Almost, but not quite. - Wietse - Fort Collins CO 10:33:03 02/14/03 (2)
    • We have them in Misouri too... - Tom in MO 13:46:35 02/14/03 (1)
      • Re: We have them in Misouri too... - Frank H 10:41:33 02/15/03 (0)
• Wish this was in the states - Ray in Phoenix just visiting from the e28 board 08:21:54 02/14/03 (11)
  • just a stupid question - stewart 12:03:16 02/14/03 (2)
    • Re: just a stupid question - Frank H 10:42:23 02/15/03 (0)
    • More than you would want... - Tulsa Dave 12:05:15 02/14/03 (0)
  • Re: Wish this was in the states - Frank H 10:00:15 02/14/03 (7)
    • Special order colors - Al from Oz 18:22:21 02/14/03 (2)
      • Re: Special order colors - Jake Hall 10:49:45 02/15/03 (1)
        • Re: Special order colors - Al from Oz 16:27:55 02/15/03 (0)
    • Yuck...and not the color - Wietse - Fort Collins CO 10:35:37 02/14/03 (3)
      • A very common problem in euro E12... - Frank H 11:43:03 02/14/03 (2)
        • My guess... - Wietse - Fort Collins CO 12:01:34 02/14/03 (1)
          • Sounds more than reasonable..... - 3.5cs 10:19:54 02/15/03 (0)
• Paging Andrew: any pics of your E12/8 up yet? - Remy Davison 07:47:04 02/14/03 (1)
  • Re: Paging Andrew: any pics of your E12/8 up yet? - Andrew 17:07:37 02/14/03 (0)
• Oil Filter Spring? - ChuckNC 07:05:25 02/14/03 (8)
  • Re: Oil Filter Spring? Whew! - ChuckNC 07:29:09 02/15/03 (0)
  • Re: Oil Filter Spring? - Matt C 16:53:05 02/14/03 (0)
  • Re: Oil Filter Spring? - Chris Hollis, Huntsville, AL 10:28:02 02/14/03 (0)
  • This was used up to September of '77... - Tulsa Dave 09:33:29 02/14/03 (1)
    • another advantage - Robert Bondi 02:23:44 02/15/03 (0)
  • Re: Oil Filter Spring? - Lou in Denver 09:25:34 02/14/03 (1)
    • See.... pre 09/77 - Tulsa Dave 09:37:36 02/14/03 (0)
  • Re: Oil Filter Spring? - Remy Davison 07:45:58 02/14/03 (0)
• kamei e12 spoiler ebay.de - james 02:07:24 02/14/03 (0)
• charcoal canister - Paul Goodfellow 02:00:52 02/14/03 (2)
  • No it just catches the fuel vapor from fuel tank - Stan 07:28:13 02/14/03 (0)
  • Re: don't know, but I ripped mine out :-) NT - Blair 03:55:55 02/14/03 (0)
• Heater Blower Switch - Alex Lugo 23:39:05 02/13/03 (3)
  • Re: Heater Blower Switch - Peter Florance 06:57:11 02/14/03 (2)
    • Re: Heater Blower Switch - Alex Lugo 17:32:21 02/14/03 (1)
      • Re: Heater Blower Switch - Peter Florance 17:44:14 02/14/03 (0)
• Alloy wheels - Nath in Tassie 22:06:26 02/13/03 (5)
  • Re: Alloy wheels - James from New Zealand 00:44:37 02/17/03 (0)
  • Re: Alloy wheels - Eric Q 16:08:55 02/14/03 (0)
  • Re: Alloy wheels - Brian in Abilene 09:22:58 02/14/03 (0)
  • commodore nt - Andrew 03:13:54 02/14/03 (0)
  • Re: Alloy wheels - Troy Rudolph 22:11:44 02/13/03 (0)
• Auto-tranny people , , , please read this . . . . - Jefflee 20:50:15 02/13/03 (6)
  • Re: Auto-tranny people - and about Dexron III - Remy Davison 08:05:09 02/14/03 (0)
  • Re: Auto-tranny people , , , please read this . . . . - Nath in Tassie 20:56:50 02/13/03 (4)
    • Re: Auto-tranny people , , , please read this . . . . - justin webster 23:38:19 02/13/03 (1)
      • Thanks guys! - Nath in Tassie 22:08:49 02/16/03 (0)
    • 3 liters equals 3.18 quarts (back of cookbook) , - Jefflee 21:18:39 02/13/03 (1)
      • I don't want to come across as a harda$$ here, - Lars Bend Or 23:40:47 02/13/03 (0)
• cr 5 spd + 3.07LS for sale - mark 16:15:25 02/13/03 (9)
  • Here are gear ratios for the CR 5-speed , , , , - Jefflee 20:39:50 02/13/03 (5)
    • Re: Here are gear ratios for the CR 5-speed , , , , - mark 21:06:50 02/13/03 (4)
      • I've thought about putting an OD trans in my - Jefflee 21:25:26 02/13/03 (3)
        • Don't want to come across as a Harda$$ here - Lars. 00:21:41 02/14/03 (1)
          • Well , , I got my liters/quarts backwards , , , - Jefflee 09:30:10 02/14/03 (0)
        • Don't want to come across as a Harda$$ here - Lars. 00:21:33 02/14/03 (0)
  • Re: cr 5 spd + 3.07LS for sale - Eric Q 18:10:28 02/13/03 (0)
  • Re: cr 5 spd + 3.07LS for sale - Brian in Mtl. 17:36:53 02/13/03 (0)
  • Re: cr 5 spd + 3.07LS for sale - Jake Hall 16:41:29 02/13/03 (0)
• lightened flywheels - Justin Webster 09:13:23 02/13/03 (8)
  • Re: lightened flywheels - Matt C 20:05:57 02/14/03 (0)
  • Also, 100lbs less of chassis is 1/10 in the 1/4 - Scott 21:34:08 02/13/03 (0)
  • Re: lightened flywheels - Frank H 15:54:38 02/13/03 (5)
    • Re: lightened flywheels - Jake Hall 16:40:49 02/13/03 (4)
      • Re: lightened flywheels - Mark 18:58:57 02/13/03 (3)
        • Those disastrous results can cost you a foot> - Lars Bend Or 19:21:57 02/13/03 (2)
          • Re: Those disastrous results can cost you a foot> - Frank H 20:02:57 02/13/03 (0)
          • I have one - Jim Hineline 19:27:07 02/13/03 (0)
• sorry Christian! - oink from OZ 05:53:49 02/13/03 (0)
• hazard light blues - oink from OZ 05:46:48 02/13/03 (5)
  • Someone wrote directions on how to fix , , , - Jefflee 21:07:37 02/13/03 (2)
    • Re: Someone wrote directions on how to fix , , , - Alan V 09:48:01 02/14/03 (1)
      • Re: Someone wrote directions on how to fix , , , - oink from oz 10:15:23 02/15/03 (0)
  • Re: hazard light blues - justin webster 08:45:50 02/13/03 (1)
    • Re: hazard light blues - Blair 11:34:16 02/13/03 (0)
• Still Backfirein - Dan Lafley 21:20:00 02/12/03 (9)
  • check your cold start valve - mikey 13:12:08 02/13/03 (2)
    • Thermo Time Switch - Dan Lafley 20:05:15 02/13/03 (1)
      • Re: Thermo Time Switch kinda long - mikey 23:46:47 02/14/03 (0)
  • Re: Still Backfirein - Chris Hollis, Huntsville, AL 11:21:15 02/13/03 (0)
  • Re: Still Backfirein - oink from oz 05:38:01 02/13/03 (1)
    • Re: Still Backfirein - ChuckNC 09:22:24 02/13/03 (0)
  • Re: Still Backfirein - Chris Hollis 21:41:05 02/12/03 (2)
    • Re: Still Backfirein - Dan Lafley 00:08:41 02/13/03 (1)
      • Re: Still Backfirein - Mike W. 00:33:07 02/13/03 (0)
• One more thing..GAS Prices and a question... - Scott 20:25:06 02/12/03 (12)
  • Price Variations - Troy Rudolph 13:14:19 02/13/03 (3)
    • Re: Price Variations - Frank H 15:57:08 02/13/03 (2)
      • The data is for the year 2000. (nt) - Troy Rudolph 20:34:06 02/13/03 (1)
        • yeh I know... but the price seem even low for 2000 - Frank H 20:52:53 02/13/03 (0)
  • You wimps... - Eric Q 00:35:09 02/13/03 (3)
    • Re: You wimps... - Kaveman 10:26:42 02/13/03 (2)
      • Re: You wimps... - Eric Q 12:52:24 02/13/03 (0)
      • OUCH!!! - ChuckNC 10:38:32 02/13/03 (0)
  • What! - Dan Lafley 21:24:28 02/12/03 (2)
    • Re: What! - Frank H 09:51:20 02/13/03 (0)
    • $1.85 for the cheap stuff - Mike W. 00:37:41 02/13/03 (0)
  • wow bummer - mikey 20:56:40 02/12/03 (0)
• Anyone in ATL GA want to get a brew Sunday???? - Scott 20:17:35 02/12/03 (4)
  • Hey , , , I could slip away for a brewski, , , , , - Jefflee 20:52:24 02/12/03 (1)
    • Ferrari???? - Scott 21:27:01 02/12/03 (0)
  • I'm already there... - Dave 20:28:13 02/12/03 (1)
    • You'll have to pick the spot and.. - Scott 21:25:13 02/12/03 (0)
• Aussies please show your hands. - Al from Oz 15:46:11 02/12/03 (17)
  • Re: Aussies please show your hands. - mike 19:52:30 02/14/03 (0)
  • Re: Aussies please show your hands. - Andrew 03:18:50 02/14/03 (0)
  • Re: Aussies please show your hands. - Remy Davison 09:36:45 02/13/03 (0)
  • Re: Aussies please show your hands. - Gerry in ACT 05:22:58 02/13/03 (0)
  • Re: Aussies please show your hands. - Joel 323 01:30:50 02/13/03 (0)
  • Aussies - Sorry forgot to put where I am. - Cristian in Sydney 22:05:27 02/12/03 (3)
    • Re: Aussies - Sorry forgot to put where I am. - James from New Zealand 00:52:44 02/17/03 (0)
    • Re: Aussies - Sorry forgot to put where I am. - oink from OZ 05:50:27 02/13/03 (0)
    • I'll try for this weekend. - Al from Oz 04:39:18 02/13/03 (0)
  • Re: Aussies please show your hands. - Cristian in Sydney 22:04:30 02/12/03 (1)
    • Re: Aussies please show your hands. - oink from oz 05:29:06 02/13/03 (0)
  • Re: Aussies please show your hands. - oink from oz 20:55:40 02/12/03 (2)
    • HaHa,I bet you never speed then!! - Al from Oz 04:42:17 02/13/03 (1)
      • Re: HaHa,I bet you never speed then!! - oink from OZ 05:33:05 02/13/03 (0)
  • Re: Aussies please show your hands. - Nath in Tassie 20:18:27 02/12/03 (2)
    • Re: Aussies please show your hands. - Mark 06:42:41 02/13/03 (0)
    • Re: Aussies please show your hands. - Jake Hall 20:51:44 02/12/03 (0)
• Tranny is leaking at speedo drive . . . - Bob/E12 6er 14:46:50 02/12/03 (2)
  • Re: always a good idea to top it up if..... - Blair 17:05:22 02/12/03 (1)
    • Thanks Blair, I may just change it too! - Bob/E12 6er 10:57:32 02/13/03 (0)
• Looking for 5er Ski Racks. Anybody have a set? - Misha 12:09:49 02/12/03 (3)
  • Re: Looking for 5er Ski Racks. Anybody have a set - Heino 00:44:03 02/16/03 (0)
  • Re: Looking for 5er Ski Racks. Anybody have a set? - Jim Hartwell from Olympia, WA 20:34:37 02/12/03 (0)
  • I do - nt - Peter Claassen 13:34:37 02/12/03 (0)
• ****** 5er Fest 2003 Info ******* - William Christine Knapp 12:03:40 02/12/03 (0)
• compliance plates - oink from oz 05:32:12 02/12/03 (4)
  • Re: compliance plates - Mark 09:12:31 02/12/03 (2)
    • Re: compliance plates - Remy Davison 09:46:18 02/13/03 (0)
    • Re: compliance plates - oink from oz 20:52:30 02/12/03 (0)
  • what is a 528i/M (nt) - james 07:48:03 02/12/03 (0)
• illuminated heater controls - oink from oz 04:57:36 02/12/03 (3)
  • Re: illuminated heater controls - Peter Florance 06:36:37 02/12/03 (2)
    • Re: illuminated heater controls - oink from OZ 05:41:06 02/13/03 (1)
      • Re: illuminated heater controls - Peter Florance 06:21:36 02/13/03 (0)
• Gearbox & fuel - Mike from S.Oz 04:49:08 02/12/03 (5)
  • Redline MTL - Troy Rudolph 13:48:05 02/12/03 (0)
  • Re: Gearbox & fuel - Mike W. 12:50:32 02/12/03 (0)
  • Re: Gearbox & fuel - Peter Florance 06:31:11 02/12/03 (0)
  • Re: Gearbox & fuel - oink from oz 05:03:18 02/12/03 (1)
    • Re: Gearbox & fuel - Mark 09:03:27 02/12/03 (0)
• Speedo, and Tach - Paul Goodfellow 02:20:56 02/12/03 (0)
• For those in snow country - Fred Fermin (SF,Ca) 01:46:07 02/12/03 (0)
• Attenzione, Achtung & LookeeHere! 5er Feast 2003 - IceHaus Dave 22:35:05 02/11/03 (0)
• Cruisin' The control - Paul GoodFellow 19:54:16 02/11/03 (2)
  • Dana Corpiration - Paul Goodfellow 02:05:29 02/12/03 (0)
  • Re: Cruisin' The control - Mr. Coffey 20:39:27 02/11/03 (0)
• Anyone Have...(cruise control info sought) - Kaveman 19:32:07 02/11/03 (0)
• Finally! - Tulsa Dave 19:16:46 02/11/03 (1)
  • Re: Finally! - Kaveman 19:26:45 02/11/03 (0)
• Defrost Knob - Dan Lafley 17:21:25 02/11/03 (3)
  • Hey Dan - Chris Hollis, Huntsville, AL 18:32:04 02/11/03 (0)
  • i've got a couple, where ya at? - ...tom 17:59:12 02/11/03 (1)
    • Tom email sent - Dan Lafley 16:35:58 02/12/03 (0)
• Power window fuse/relay? - Brian in Abilene 13:53:35 02/11/03 (2)
  • Re: Power window fuse/relay? - igallop 14:30:47 02/11/03 (1)
    • Will do (m) - Brian in Abilene 14:46:25 02/11/03 (0)
• Gasket Kits (windows & doors). Where to buy? - valerius 13:21:54 02/11/03 (2)
  • Re: Gasket Kits (windows & doors). Where to buy? - mikey 15:29:42 02/11/03 (1)
    • maybe bimmer parts company? - mikey 15:35:57 02/11/03 (0)
• Attention: Chris Hollis - Paul Goodfellow 00:21:01 02/11/03 (3)
  • Hello Paul - Chris Hollis 07:23:21 02/11/03 (2)
    • Cruise Control - Paul 11:01:38 02/11/03 (1)
      • Re: Cruise Control - Chris Hollis, Huntsville, AL 12:34:55 02/11/03 (0)
• TAIL LIGHT ASSEMBLY - Cliff 00:09:12 02/11/03 (3)
  • Re: TAIL LIGHT ASSEMBLY - will ollison 18:02:15 02/11/03 (0)
  • Here's the fix I used.... - Tim G in Central NJ 09:57:53 02/11/03 (0)
  • Re: TAIL LIGHT ASSEMBLY - will ollison 04:04:36 02/11/03 (0)
• ATTN: Eric Q .... e-mail me with a phone # so i - luvs (in sd) 22:17:14 02/10/03 (0)
• $$$ to rebuild injectors - 77 530-I? - Jim Hartwell from Olympia, WA 21:12:20 02/10/03 (7)
  • Re: $$$ to rebuild injectors - 77 530-I? - Ryan Bryan 08:23:44 02/11/03 (0)
  • just had it done to my 78, - koop 03:29:37 02/11/03 (0)
  • Re: $$$ to rebuild injectors - 77 530-I? - Fred Fermin (SF,CA) 01:50:27 02/11/03 (0)
  • How are they leaking? (more) - Mike W. 23:33:31 02/10/03 (3)
    • Re: How are they leaking? (more) - Jim Hartwell from Olympia, WA 23:59:28 02/10/03 (2)
      • Re: How are they leaking? (more) - Mike W. 00:33:15 02/11/03 (1)
        • Re: How are they leaking? (more) - Jim Hartwell 22:15:36 02/11/03 (0)
• Diagnostic Connector - Terry Herrera 18:44:46 02/10/03 (3)
  • Re: Diagnostic Connector - Peter Florance 20:46:17 02/10/03 (0)
  • Re: Diagnostic Connector - Don Daynes 20:45:44 02/10/03 (1)
    • it's really a function of - Peter Florance 20:48:01 02/10/03 (0)
• Auto to Manual - Bob Marks 17:18:06 02/10/03 (3)
  • Re: Auto to Manual - Chris Hollis 19:17:20 02/10/03 (0)
  • Not Difficult but - Chris 19:05:08 02/10/03 (0)
  • Re: Auto to Manual - ChuckNC 17:35:26 02/10/03 (0)
• temp guage flickers with indicators and highbeams - ckn 16:44:57 02/10/03 (6)
  • Re: temp guage flickers with indicators and highbeams - Peter Florance 17:28:56 02/10/03 (5)
    • And even add a ground wire - Mike W. 23:24:48 02/10/03 (4)
      • whereabouts on the engine and body? (nt) - Lenny D. 01:41:49 02/11/03 (3)
        • Re: whereabouts on the engine and body? (nt) - Mike W. 00:05:21 02/12/03 (0)
        • Anywhere on the engine and... - Tulsa Dave 07:14:26 02/11/03 (1)
          • Re: Anywhere on the engine and... - Bob 19:15:37 02/11/03 (0)
• What cars will a L-jet FI conversion fit? - Ryan Bryan 14:23:54 02/10/03 (3)
  • Re: What cars will a L-jet FI conversion fit? - Klaus 18:46:36 02/10/03 (0)
  • Re: What cars will a L-jet FI conversion fit? - Troy Rudolph 14:54:56 02/10/03 (0)
  • Re: What cars will a L-jet FI conversion fit? - Frank H 14:44:49 02/10/03 (0)
• fuel consumption - ChuckNC 13:36:13 02/10/03 (7)
  • Fantastic Hwy MPG... Stay OUT of town.... - Lars 14:20:15 02/10/03 (1)
    • I wish I was even CLOSE to that!!! - Scott 18:31:52 02/11/03 (0)
  • oops! '81 528i (nt) - ChuckNC 13:42:35 02/10/03 (4)
    • fuel consumption - Christian oak,ca 15:52:24 02/10/03 (3)
      • Re: fuel consumption - ChuckNC 09:06:58 02/11/03 (2)
        • Re: fuel consumption - Igallop 14:43:09 02/11/03 (1)
          • Re: fuel consumption - ChuckNC 10:08:30 02/12/03 (0)
• Attn: Dan Lafley - Chris Hollis, Huntsville, AL 13:30:46 02/10/03 (5)
  • Relays - Dan Lafley 14:02:02 02/10/03 (4)
    • YES - Chris Hollis, Huntsville, AL 16:00:44 02/10/03 (3)
      • Desperatlly!!!! - Dan Lafley 16:39:40 02/10/03 (2)
        • Oh dear! - Chris Hollis, Huntsville, AL 16:50:22 02/10/03 (1)
          • Re: Oh dear! - Dan lafley 17:10:16 02/10/03 (0)
• Allen Apo: Did yourecieve... - Beamher Bob 13:15:34 02/10/03 (0)
• your opinion...cylinder head - Matt C 12:54:30 02/10/03 (3)
  • Good Price - Chris 13:02:17 02/10/03 (2)
    • Correct Link. What the hell was that??? - Lars Bend Or 01:16:36 02/11/03 (0)
    • AMC ... Amadeo Marti Carbonell--Spanish Head link - Lars Bend Or 01:13:07 02/11/03 (0)
• Fuel Injection Query (Attn: Peter) - Erk 12:48:48 02/10/03 (4)
  • Re: Fuel Injection Query (Attn: Peter) - Peter Florance 13:24:38 02/10/03 (3)
    • How 'bout MegaSquirt? - Troy Rudolph 14:58:17 02/10/03 (2)
      • Mega Squirt?? - Erk 17:51:08 02/10/03 (1)
        • n/m, I found it ! (eom) - Erk 18:52:35 02/10/03 (0)
• weekend report - ChuckNC 10:25:42 02/10/03 (0)
• What diffbrake(?) can i use in my 525 E12 ? - Niklas Edlund 06:01:11 02/10/03 (2)
  • Yes, early 6 series - Mike W. 12:07:17 02/10/03 (1)
    • Thanx , just what i needed to get confirmed ! - Niklas Edlund 10:01:28 02/11/03 (0)
• Throttle Body Dia - Joel 323 02:06:14 02/10/03 (1)
  • Re: Throttle Body Dia - Peter Florance 04:56:41 02/10/03 (0)
• e12 ECU - Joel 323 00:51:39 02/10/03 (14)
  • Re: e12 ECU - Peter Florance 04:59:31 02/10/03 (13)
    • Re: e12 ECU - Joel 323 03:39:10 02/12/03 (1)
      • Re: e12 ECU - Peter Florance 06:43:21 02/13/03 (0)
    • hahaha another e12 with l-plates!! - Andrew 14:03:56 02/10/03 (10)
      • Re: hahaha another e12 with l-plates!! - Joel 323 03:43:16 02/12/03 (0)
      • 1 plates? - Peter Florance 17:29:45 02/10/03 (8)
        • An explaination of L plates - Al from Oz 20:08:53 02/10/03 (2)
          • oh no... - Peter Florance 20:44:49 02/10/03 (1)
            • Re: oh no... - Al from Oz 21:07:03 02/10/03 (0)
        • Re: 1 plates? - Tulsa Dave 18:07:11 02/10/03 (4)
          • Re: 1 plates? - Nath in Tassie 20:08:30 02/10/03 (3)
            • Re: 1 plates? - Bob 19:26:09 02/11/03 (0)
            • Hah! Same as the U.K. - Tulsa Dave 20:18:37 02/10/03 (1)
              • Re: Hah! Same as the U.K. - Al from Oz 20:57:23 02/10/03 (0)
• e28 Grills - Barry Mabery 22:37:21 02/09/03 (2)
  • No - Don Daynes 23:23:26 02/09/03 (1)
    • Re: No - Barry Mabery 15:35:26 02/10/03 (0)
• Dummy Input Shaft - Chris 20:09:24 02/09/03 (1)
  • What I do - Mike W. 23:26:27 02/09/03 (0)
• Chris' manual gearbox - Nath in Tassie 19:28:11 02/09/03 (2)
  • Re: Chris' manual gearbox - chris in vic 16:38:05 02/10/03 (1)
    • Re: Chris' manual gearbox - Nath in Tassie 20:29:44 02/10/03 (0)
• Cylinder head markings - Matt C 18:48:35 02/09/03 (1)
  • Re: Cylinder head markings - Mike W. 23:40:14 02/09/03 (0)
• Changed steering wheels - Don Daynes 17:37:48 02/09/03 (4)
  • How did you get that wheel (325es) to fit , , , , - Jefflee 23:07:11 02/09/03 (1)
    • Re: How did you get that wheel (325es) to fit , , , , - Don Daynes 23:34:25 02/09/03 (0)
  • Re: Changed steering wheels - Adam Wilson 20:28:12 02/09/03 (1)
    • Re: Changed steering wheels - Don Daynes 22:15:34 02/09/03 (0)
• 524td tach not working - keith martin 15:32:33 02/09/03 (1)
  • bimmer.org - Peter Florance 15:45:56 02/09/03 (0)
• yellow highbeams - Kevin 15:29:33 02/09/03 (4)
  • HA! Another yellow light person - Adam Wilson 20:23:17 02/09/03 (1)
    • THANKS - Kevin 22:13:27 02/09/03 (0)
  • Re: yellow highbeams - Jamie from Seattle 15:52:16 02/09/03 (0)
  • Re: yellow highbeams - Tulsa Dave 15:48:10 02/09/03 (0)
• I NEED IT! - Nick, CO 14:28:34 02/09/03 (3)
  • Re: I NEED IT! - Michael Kucan 08:39:38 02/13/03 (0)
  • And nobody has bid on it... - Mike W. 23:56:27 02/09/03 (1)
    • Re: And nobody has bid on it... - Nick, CO 04:47:43 02/12/03 (0)
• Bay Area Smog Day.... - Kaveman 12:03:26 02/09/03 (0)
• bmw 528 i-85 - ziggy 04:48:44 02/09/03 (3)
  • exactly what year and type of injection - Mike W. 23:51:42 02/09/03 (2)
    • Re: exactly what year and type of injection - ziggy 02:14:42 02/10/03 (1)
      • Directions I'd look in - Mike W. 17:31:11 02/10/03 (0)
• E28 M5 BBS Wheels on an E12? - M. Aho 00:47:36 02/09/03 (2)
  • Re: E28 M5 BBS Wheels on an E12? - Eric Q 02:34:41 02/09/03 (1)
    • Re: E28 M5 BBS Wheels on an E12? - Jake Hall 20:22:47 02/09/03 (0)
• 85 528E v. 528i - Jim Hartwell from Olympia, WA 20:41:16 02/08/03 (9)
  • Re: 85 528E v. 528i - Jim Hartwell from Olympia, WA 20:43:13 02/10/03 (0)
  • I just got an E-34 535i for $3800...... - Bill Bowes 20:27:48 02/09/03 (0)
  • they are all good cars - mikey 16:24:14 02/09/03 (0)
  • Get a '85-'88 535i! More... - Jeff Olson 23:11:22 02/08/03 (0)
  • Regarding: 528E v. 528i - John in Simi Valley 23:02:56 02/08/03 (0)
  • Re: 85 528E v. 528i - Frank H 21:56:15 02/08/03 (0)
  • Re: 85 528E v. 528i - Jim Hartwell 21:14:56 02/08/03 (2)
    • Re: 85 528E v. 528i - Mike W. 00:18:08 02/09/03 (1)
      • Re: 85 528E v. 528i (long) - Remy Davison 09:26:10 02/09/03 (0)
• Turn signals dead - Alan V 20:04:25 02/08/03 (3)
  • Re: Turn signals dead - stewart 08:42:08 02/09/03 (1)
    • Re: Turn signals dead - Alan V 19:09:08 02/09/03 (0)
  • Re: Turn signals dead - Chris Hollis 20:17:43 02/08/03 (0)
• Peter, money sent from decal sales etc. - Randy McCafferty 18:15:09 02/08/03 (0)
• 1 happy new 5er ... new car's ALL good. - Dave D in GA 18:04:31 02/08/03 (1)
  • Dave, where are you in atl?? Im in Gainesville.. - Scott 21:39:07 02/08/03 (0)
• Brakes - Tom in NY 13:42:56 02/08/03 (2)
  • Re: Brakes - Chris Hollis 17:08:52 02/08/03 (0)
  • Re: Brakes - Troy Rudolph 15:38:29 02/08/03 (0)
• deep thoughts by justin webster (or a question) - justin webster 12:34:38 02/08/03 (2)
  • Re: deep thoughts by justin webster (or a question) - Kaveman 17:40:03 02/08/03 (0)
  • I can't save you from stupidity but , , , - Jefflee 16:54:19 02/08/03 (0)
• Parts - Chris Hollis, Huntsville, AL 09:54:06 02/08/03 (3)
  • Rear Defrost Knob - Dan Lafley 00:59:16 02/10/03 (0)
  • Re: Parts - Peter Florance 07:39:36 02/09/03 (1)
    • Hey Peter - Chris Hollis 12:01:08 02/09/03 (0)
• I need a heater core - Joel B. 20:45:38 02/07/03 (3)
  • Re: I need a heater core - Mike W. 00:23:58 02/09/03 (1)
    • Re: I need a heater core - Joel B. 09:06:07 02/09/03 (0)
  • Re: I need a heater core - Mike V 16:19:02 02/08/03 (0)
• separating engine from trans... - ChuckNC 16:15:56 02/07/03 (3)
  • Re: separating engine from trans... - Kaveman 16:43:00 02/07/03 (2)
    • Re: separating engine from trans... - karl sisson 05:47:25 02/08/03 (0)
    • Thanks!! (nt) - ChuckNC 05:44:13 02/08/03 (0)
• The "Cashier Check" car purchase scam??? - Lars Bend Or 13:21:52 02/07/03 (3)
  • Re: The "Cashier Check" car purchase scam??? - Jamie Lyon 09:36:17 02/09/03 (0)
  • I said go ahead and I will process the order. - Craig Day 17:23:10 02/07/03 (1)
    • Report it to the US Treasury - Chris 11:55:48 02/08/03 (0)
• Washington State Chat Rooms free membership - Kimberly 12:56:19 02/07/03 (11)
  • want to help? - Spam Slammer 07:45:16 02/09/03 (0)
  • Thanks so much ... - Troy Rudolph (Webmaster) 20:29:37 02/07/03 (0)
  • Asian and 5'11 ???(nt) - David P 14:56:45 02/07/03 (2)
    • Ever heard of Yao Ming? (nt) - Eric Q 15:10:26 02/07/03 (1)
      • Sure, but I wouldn't want to date him (nt) - David P 16:51:41 02/07/03 (0)
  • Re: Washington State Chat Rooms free membership - Frank H 13:57:29 02/07/03 (5)
    • Not sure about the wrench... - Tulsa Dave 15:10:24 02/07/03 (4)
      • And a few "ills" for your trouble !! nt - Jefflee 16:42:51 02/07/03 (3)
        • Where is the Dictator for Life when you need him? - Jeff C 18:18:12 02/07/03 (2)
          • Re: Where is the Dictator for Life when you need him? - Frank H 18:48:22 02/07/03 (1)
            • Maybe Peter did this so we'd miss him !!! nt - Jefflee 21:27:53 02/07/03 (0)
• Redline Trans Fluid (Again) - karl sisson 12:20:31 02/07/03 (1)
  • Re: Redline Trans Fluid (Again) - Lenny D. 12:40:31 02/07/03 (0)
• A general question about turboing an M30 engine - Jeff C 10:00:14 02/07/03 (19)
  • 745 is a whole car, not just an engine, but - Mike W. 21:12:13 02/08/03 (0)
  • Re: Bolt-on? I don't think so....... - Bill Bowes 08:24:06 02/08/03 (6)
    • Re: Bolt-on? I don't think so....... - Frank H 10:30:59 02/08/03 (5)
      • Re: Bolt-on? I don't think so....... - fb 21:40:12 02/08/03 (1)
        • Re: Bolt-on? I don't think so....... - Frank H 22:09:29 02/08/03 (0)
      • Re: Think again..... - Bill Bowes 21:24:08 02/08/03 (2)
        • 2340 weekends-thats all folks! - Al from Oz 04:11:49 02/09/03 (0)
        • Bolt on to me means, no major mods - Frank H 22:06:54 02/08/03 (0)
  • notes on compresso - Andrew 01:53:36 02/08/03 (2)
    • Re: notes on compresso - Frank H 10:42:50 02/08/03 (0)
    • oops subject should have been - notes on compression and my own plans nt 01:54:43 02/08/03 (0)
  • Check the discussion at www.745i.com - David P 16:54:49 02/07/03 (0)
  • Re: A general question about turboing an M30 engine - Frank H 10:42:59 02/07/03 (6)
    • 9/16 x 18 NSF - Frank H 13:53:39 02/07/03 (1)
      • Thks much (nt) - Jeff C 18:13:48 02/07/03 (0)
    • Hey Frank, the TT will be installed soon. - TCD 12:16:34 02/07/03 (1)
      • Re: Hey Frank, the TT will be installed soon. - Frank H 13:59:48 02/07/03 (0)
    • Re: A general question about turboing an M30 engine - Blair 12:15:18 02/07/03 (1)
      • Re: A general question about turboing an M30 engine - Frank H 14:03:50 02/07/03 (0)
• weekend projects - ChuckNC 05:30:06 02/07/03 (0)
• Haynes Manual - ChuckNC 05:17:24 02/07/03 (0)
• heater core - Joel B. 23:29:09 02/06/03 (0)
• Email Address - Troy Rudolph (Webmaster) 23:02:55 02/06/03 (0)
• Good 5er stuff in the Feb Roundel! (nt) - Jim Davis 22:24:09 02/06/03 (0)
• How do I , , , , , , - Jefflee 21:11:42 02/06/03 (2)
  • which one... - Robert Bondi 00:52:50 02/07/03 (0)
  • Email Address - Troy Rudolph (Webmaster) 23:05:00 02/06/03 (0)
• turbo folks? - jason 17:46:08 02/06/03 (3)
  • Re: turbo folks? - Robert Purington 15:51:24 02/07/03 (0)
  • I want in....can never learn too much!! - Scott 21:43:39 02/06/03 (1)
    • Guess you need my email eh?? - Scott 21:44:22 02/06/03 (0)
• Window tint help - Chris Hollis, Huntsville, AL 16:35:52 02/06/03 (6)
  • The answer is ,,,,,,,,,,,,,, - Jefflee 20:53:48 02/06/03 (2)
    • Re: The answer is ,,,,,,,,,,,,,, - Chris Hollis 07:17:48 02/07/03 (1)
      • Repetition & Time -- For a 'good cause'. nt - Jefflee 09:36:53 02/07/03 (0)
  • Re: Window tint help - Bill Bowes 20:41:47 02/06/03 (2)
    • Re: Window tint help - Chris Hollis 07:13:34 02/07/03 (1)
      • I think you need to start it first - Mike W. 00:36:15 02/08/03 (0)
• Suggestions/opinions wanted... - billy in SLO 14:32:06 02/06/03 (4)
  • What I 've seen ... - Peter Claassen 18:39:08 02/07/03 (0)
  • Re: Suggestions/opinions wanted... - Cristian In Sydney 14:53:47 02/06/03 (2)
    • Pics?... - Tom in Mo 14:57:40 02/06/03 (1)
      • Re: Pics?... - Cristian in Sydney 15:44:01 02/09/03 (0)
• Proud new owner of older BMW . . . - Jefflee 14:07:59 02/06/03 (1)
  • Re: Proud new owner of older BMW . . . - Chris Hollis, Huntsville, AL 14:37:40 02/06/03 (0)
• Brake pad warning light - T.Han 14:06:13 02/06/03 (2)
  • easy way to fix it - mikey 16:12:35 02/07/03 (0)
  • Re: Brake pad warning light - Lenny D. 15:41:19 02/06/03 (0)
• Front Spolier - Dan Lafley 11:39:10 02/06/03 (0)
• windshield wipers.... - justin webster 09:04:20 02/06/03 (1)
  • Re: windshield wipers.... - Kaveman 09:58:28 02/06/03 (0)
• Jack Stands - Tom in MO 07:33:23 02/06/03 (3)
  • Re: Jack Stands - Jefflee 09:42:04 02/06/03 (2)
    • Re: Jack Stands - Tom in MO 14:04:54 02/06/03 (1)
      • I used two 2's and 2 3-ton (up front) nt - Jefflee 21:01:01 02/06/03 (0)
• EGR - Dan Lafley 00:38:05 02/06/03 (4)
  • Re: EGR - Dusan Vacval 10:18:21 02/08/03 (0)
  • Re: EGR - Robert Bondi 00:54:40 02/07/03 (2)
    • Yes....NT - Dan Lafley 02:03:32 02/07/03 (1)
      • approx - Robert Bondi 02:13:34 02/08/03 (0)
• Defrost? - Jim Brandford 00:32:19 02/06/03 (9)
  • Re: Defrost? - Jim Brandford 16:02:51 02/06/03 (0)
  • yep, pulls out to turn on rear window defrost - ...tom 06:09:27 02/06/03 (7)
    • Are only Euro cars' defront buttons lighted? (nt) - Tim G in Central NJ 07:07:30 02/06/03 (6)
      • My '79 528i is lighted - Nick, CO 07:17:41 02/06/03 (5)
        • What color is yours?? Mine's green - Euro. nt - Jefflee 09:52:16 02/06/03 (4)
          • '80 and '81 diving board bumper models... - Tulsa Dave 10:07:12 02/06/03 (3)
            • Yep, mine's an '81 w/ a green light (nt) - Tim G in Central NJ 15:05:04 02/06/03 (0)
            • I have a hieroglyphic drawing on mine. nt - Jefflee 13:57:24 02/06/03 (1)
              • ..it's the international symbol for 'defrost' lol! - Lenny D. 19:28:15 02/06/03 (0)
• IMPORTANT SO_CAL INFO...!!! - jim in sd 00:09:01 02/06/03 (4)
  • Re: IMPORTANT SO_CAL INFO...!!! - Eric Q 02:33:33 02/06/03 (1)
    • i will be there avail for work the 8th thru the - brian 'luvs' 02:53:44 02/06/03 (0)
  • ????????? - Tulsa Dave 00:24:13 02/06/03 (1)
    • sory .. i did not know he posted here too (more) - brian 'luvs' 01:54:14 02/06/03 (0)
• Light Flywheel - Jake Hall 23:17:14 02/05/03 (1)
  • Re: Light Flywheel - JR --- 1978 635CSi 06:58:06 02/06/03 (0)
• Fan Clutch - Dan lafley 21:46:44 02/05/03 (3)
  • Re: Fan Clutch - Mark 07:17:30 02/06/03 (0)
  • Re: Fan Clutch - Dan Lafley 00:38:51 02/06/03 (0)
  • There are either two or three different styles - Lars Bend Or 21:55:30 02/05/03 (0)
• The friendliness of this board - Jeff C 21:18:49 02/05/03 (9)
  • If you want to compare... - Bimmer Bob 13:28:49 02/06/03 (0)
  • You Too - John in Simi Valley 12:44:20 02/06/03 (0)
  • Well Said!!! - Eddie (To.,Ont., Canada) 23:53:30 02/05/03 (0)
  • Re: The friendliness of this board - stewart 23:36:14 02/05/03 (0)
  • Re: Its the E12's, they breed niceness...... NT - Blair 22:30:53 02/05/03 (0)
  • Git over here and Gitcher Hug!!! >>>> - Lars Bend Or 21:57:38 02/05/03 (1)
    • LOL!! nt - Scott 22:48:39 02/05/03 (0)
  • Say Jeff... - Mike V. 21:45:46 02/05/03 (1)
    • Thank you for the words of sympathy... - Jeff C 07:30:50 02/06/03 (0)
• Hey Frank, - Jeff C 21:05:45 02/05/03 (0)
• Car talk puzzle of the week - Frank H 20:56:36 02/05/03 (4)
  • two ideas, probably not the correct answer - rexmo 15:47:39 02/07/03 (0)
  • Re: Car talk puzzle of the week - Greg 11:04:59 02/06/03 (0)
  • Got it! - Remy Davison 09:14:03 02/06/03 (0)
  • well....do you want an answer??? - Scott 23:01:52 02/05/03 (0)
• Chris in Vic - Nath in Tassie 20:34:30 02/05/03 (0)
• anybody know of a good repair shop in... - igallop 19:44:49 02/05/03 (0)
• Thanks Al - Nath in Tassie 18:37:03 02/05/03 (1)
  • Re: Thanks Al - Chris in VIC 20:15:16 02/05/03 (0)
• Ok, Let's try this one....3.4L, anyone know - Scott 18:07:15 02/05/03 (3)
  • Re: Ok, Let's try this one....3.4L, anyone know - Troy Rudolph 09:58:58 02/06/03 (2)
    • Thanks Troy, but I need an E28 3.4.....I'll Call.. - Scott 15:51:40 02/06/03 (1)
      • I'm sure they have an e28 engine. - Troy RudolphT 16:29:27 02/06/03 (0)
• e12 Going, going, g... - Collins 16:39:00 02/05/03 (6)
  • Tell me when, I'll be ready (nt) - Collins 12:51:27 02/06/03 (0)
  • Re: e12 Going, going, g... - Christian oak,ca 22:05:37 02/05/03 (3)
    • ditto for folks out east - stewart 23:42:44 02/05/03 (2)
      • deal, how about delaware - ...tom 06:12:05 02/06/03 (0)
      • Re: ditto for folks out east - justin webster 00:20:34 02/06/03 (0)
  • If you were on this coast Id be there tonight!! - Scott 16:58:14 02/05/03 (0)
• preparing to do the 3.5 swap and want to know(M) - billy 15:13:43 02/05/03 (10)
  • Re: preparing to do the 3.5 swap and want to know(M) - Kaveman 18:08:20 02/05/03 (4)
    • to recap then: - billy in SLO 18:49:16 02/05/03 (3)
      • Re: to recap then: - Kaveman 19:08:24 02/05/03 (2)
        • Thanks Sean(M) - billy in SLO 10:58:53 02/06/03 (1)
          • Re: Thanks Sean(M) - Kaveman 14:04:05 02/06/03 (0)
  • Re: preparing to do the 3.5 swap and want to know(M) - Scott 15:52:32 02/05/03 (4)
    • Re: preparing to do the 3.5 swap and want to know(M) - Frank H 19:07:23 02/05/03 (3)
      • Yeah I think so.. - Scott 23:09:24 02/05/03 (2)
        • I agree, but also later A/C bracket - Mike W. 00:15:15 02/06/03 (1)
          • Re: I agree, but also later A/C bracket - Kaveman 09:55:43 02/06/03 (0)
• Looking for good '80-'81 G265 - Michael Petrus (just visting) 14:30:00 02/05/03 (3)
  • Re: Looking for good '80-'81 G265 - Troy Rudolph 15:18:58 02/05/03 (2)
    • Re: how about some pics? love to see a M2... NT - blair 23:41:58 02/05/03 (1)
      • How about 28 of them? - Michael Petrus 09:33:32 02/06/03 (0)
• 3.5Liter - Scott 13:06:56 02/05/03 (5)
  • Re: 3.5Liter - JR --- 1978 635CSi 13:49:49 02/05/03 (0)
  • Re: 3.5Liter - Troy Rudolph 13:15:43 02/05/03 (3)
    • Thats exactly what I needed to know...(more) - Scott 13:59:44 02/05/03 (2)
      • Need the whole thing. - Troy Rudolph 15:17:37 02/05/03 (1)
        • I just found that out! D^#&%IT!!! one more ? - Scott 15:45:59 02/05/03 (0)
• rear head rests - Michael Kucan 09:28:51 02/05/03 (2)
  • Re: rear head rests - ChuckNC 14:14:54 02/05/03 (0)
  • Re: rear head rests- you just missed an Ebay pair - Brian from Montreal 09:42:42 02/05/03 (0)
• Surging idle still - Brian in Abilene 08:32:11 02/05/03 (0)
• Paging Peter and/or Troy - Randy M 07:45:45 02/05/03 (1)
  • Re: Paging Peter and/or Troy - Peter Florance 18:47:27 02/06/03 (0)
• Repair Manual in Ebay - Fred Fermin (SF,CA) 01:32:57 02/05/03 (5)
  • Where can I get one of those blue binders - JR --- 1978 635CSi 14:11:11 02/05/03 (0)
  • Shhhh......! nt - Lenny D. 02:07:10 02/05/03 (3)
    • Lenny, I asked a week ago about this.... - Scott 12:25:38 02/05/03 (2)
      • I've been in and out of here..... - Lenny D. 18:01:37 02/05/03 (1)
        • ...nevermind, I found it! - Lenny D. 18:30:03 02/05/03 (0)
• EGR - Dan Lafley 01:14:04 02/05/03 (0)
• E28 Door Panels - Doug Kelm 23:26:00 02/04/03 (2)
  • Yes, but - Lars... 00:30:40 02/05/03 (1)
    • Good advice, don't bother - BillW 10:43:33 02/05/03 (0)
• Car of the month - Nath in Tassie 23:16:55 02/04/03 (2)
  • Re: Car of the month - Troy Rudolph (Webmaster) 08:11:58 02/05/03 (1)
    • Re: Car of the month - Nath in Tassie 18:40:18 02/05/03 (0)
• Al in Oz - Nath in Tassie 23:13:53 02/04/03 (2)
  • 2.8i/3.5 - Al from Oz 04:45:57 02/05/03 (1)
    • OK!!I must learn to proof read. - Al from Oz 04:48:08 02/05/03 (0)
• 2.8i - Nath in Tassie 21:08:35 02/04/03 (0)
• Sean: You still have them thar spings? - Misha 18:38:49 02/04/03 (3)
  • Re: Sean: You still have them thar spings? - Kaveman 20:54:13 02/04/03 (2)
    • Yeah. I will take the rears. Are they green.... - Mishas 14:34:26 02/05/03 (1)
      • Re: Yeah. I will take the rears. Are they green.... - Kaveman 17:07:24 02/06/03 (0)
• back-up lamps - igallop 17:05:04 02/04/03 (6)
  • Re: back-up lamps - Robert Bondi 00:53:22 02/05/03 (3)
    • Robert can perform this repair with only his - Scott 17:02:35 02/05/03 (2)
      • good one, Scott ! - Robert Bondi 00:48:33 02/07/03 (0)
      • Re: Robert can perform this repair with only his - igallop 19:39:12 02/05/03 (0)
  • Re: back-up lamps - Kristopher Barrett 17:15:50 02/04/03 (1)
    • Re: back-up lamps - igallop 18:27:30 02/04/03 (0)
• Where are the fitting holes on brakes calipers for - Tom in NY 15:18:52 02/04/03 (5)
  • Re: Where are the fitting holes on brakes calipers for - Kristopher Barrett 17:06:06 02/04/03 (3)
    • Re: Where are the fitting holes on brakes calipers for - Tom in NY 07:28:56 02/05/03 (0)
    • Great FAQ/Brake Rebuild Tech!!!! - Wietse 21:39:00 02/04/03 (1)
      • Konnichiwa - ChuckNC 23:44:00 02/04/03 (0)
  • There aren't any.... - Frank H 16:00:59 02/04/03 (0)
• Thread on shifter - Jeff C 15:05:35 02/04/03 (6)
  • Re: Thread on shifter - Barry Mabery 11:31:54 02/06/03 (0)
  • Re: Thread on shifter - Frank H 19:59:29 02/04/03 (2)
    • Thanks Frank... - Jeff C 22:19:26 02/04/03 (1)
      • 2nd attempt at the photo of knob - Jeff C 22:21:02 02/04/03 (0)
  • Re: Thread on shifter - Scott 16:13:27 02/04/03 (1)
    • Re: Thread on shifter - Jeff C 17:49:40 02/04/03 (0)
• Nardi wheels for BMW's - jeffrey Fellman 13:03:06 02/04/03 (2)
  • URL doesn't seem to work? - Al from Oz 17:37:49 02/04/03 (0)
  • This Post is OK! - Troy Rudolph (Webmaster) 15:09:53 02/04/03 (0)
• Nice set of gray cloth seats spotted - rexmo 09:23:13 02/04/03 (0)
• What kind of exhaust perf upgrades do you all have - JR --- 1978 635CSi 07:18:42 02/04/03 (8)
  • e34-->custom - Karl in KS 16:48:01 02/04/03 (0)
  • Re: What kind of exhaust perf upgrades do you all have - Scott 16:10:43 02/04/03 (2)
    • Your exhaust sound was the coolest ever ! nt - Jefflee 16:16:46 02/04/03 (1)
      • Thanks....I get a lot of looks when I start - Scott 17:09:14 02/04/03 (0)
  • Straight 3" pipe,,,, - Trubey 12:38:30 02/04/03 (0)
  • Re: What kind of exhaust perf upgrades do you all have - Sam Schultz 10:14:40 02/04/03 (2)
    • Flowmaster - Troy Rudolph 11:36:24 02/04/03 (1)
      • Re: Flowmaster - Blair 12:42:17 02/04/03 (0)
• Finally moved into my new shop - Lars 00:40:23 02/04/03 (10)
  • Lars. You're now the "Shop Next Door". . . . . . - Jefflee 16:21:41 02/04/03 (2)
    • NEXT door?? Where is it you live... come on Over. - Lars 22:30:32 02/04/03 (1)
      • At 4200 RPM, it would take me , , , , , - Jefflee 23:06:45 02/04/03 (0)
  • Did you put in a beer fridge yet? - Tulsa Dave 10:53:26 02/04/03 (2)
    • Hmmmmm....noooooo! I really need to get some - Lars.... 22:25:04 02/04/03 (1)
      • I'm not sure what an Alfa resto looks like... - Tulsa Dave 10:27:23 02/05/03 (0)
  • PARTY at Lars place! - Mark 07:42:44 02/04/03 (1)
    • Funny you should say that... because - Lars Bend Or 22:27:13 02/04/03 (0)
  • cograts! save some space for me! - mikey 02:26:11 02/04/03 (1)
    • Yeah,,, I know why.. I've seen your shop....>>> - Lars Bend Or 22:29:29 02/04/03 (0)
• Adam Wilson got published! - Tulsa Dave 21:12:26 02/03/03 (6)
  • Kudos, Adam! nt - Lenny D. 10:50:30 02/04/03 (0)
  • Cool! - Robert Bondi 02:21:29 02/04/03 (1)
    • Re: Cool! - Adam Wilson 09:06:57 02/04/03 (0)
  • thanks Dave! - Adam Wilson 23:02:18 02/03/03 (0)
  • Awesome! Cant wait til August! nt - Scott 22:19:58 02/03/03 (0)
  • That was really nice Dave. Thanks. nt - Jefflee 21:23:59 02/03/03 (0)
• Brake Parts Installed.... Weekend Update - Kaveman 20:22:03 02/03/03 (0)
• engine/fuel boosters - igallop 20:06:47 02/03/03 (1)
  • Injection cleaner sometimes, but - Mike W. 20:24:32 02/03/03 (0)
• 77 530i VS 78 530i - Zach Beck 18:05:22 02/03/03 (5)
  • Re: 77 530i VS 78 530i - Scott 19:07:23 02/03/03 (4)
    • Re: 77 530i VS 78 530i - Niklas Edlund 10:44:22 02/11/03 (0)
    • no big differences! - Robert Bondi 19:47:37 02/03/03 (2)
      • Oh yeah.....I for one think teh 75 and 76 models - Scott 21:04:33 02/03/03 (1)
        • Re: Oh yeah.....I for one think teh 75 and 76 models - Robert Bondi 02:15:50 02/04/03 (0)
• Michelin vs Dunlop - Christian oak,ca 15:06:28 02/03/03 (11)
  • I just bought a set of Dunlops from Tire Rack... - Eric Q 01:08:09 02/04/03 (0)
  • I have both. - John in Simi Valley 20:02:52 02/03/03 (0)
  • Dunlap suck I have had 4 bad sets... get yokos. - Sam Schultz 19:25:53 02/03/03 (1)
    • dittio! get yokohamas! EOM - mikey 02:29:23 02/04/03 (0)
  • Search the Dunlop model on Yahoo or Google - Lars 18:50:41 02/03/03 (0)
  • Thanks all [WAS Re: Michelin vs Dunlop] - Christian oak,ca 18:28:31 02/03/03 (0)
  • Re: Michelin vs Dunlop - Karl 17:08:41 02/03/03 (0)
  • I've heard the same thing from many Dunlop... - Tim G in Central NJ 16:40:25 02/03/03 (0)
  • Re: Michelin vs Dunlop - Lou In Denver 16:20:16 02/03/03 (0)
  • Re: Michelin vs Dunlop - Jake Hall 15:14:43 02/03/03 (1)
    • Re: Michelin vs Dunlop - Blair 16:29:14 02/03/03 (0)
• Impressions of Suspension Techniques sways - JR --- 1978 635CSi 14:42:45 02/03/03 (13)
  • good but what options are there? - ...tom 08:53:56 02/04/03 (4)
    • not stiff enough? - Peter Florance 09:38:41 02/04/03 (3)
      • still understeering (pushing?) - ...tom 10:18:33 02/04/03 (2)
        • Re: still understeering (pushing?) - Peter Florance 18:55:18 02/06/03 (0)
        • Re: still understeering (pushing?) - Lee Cornett 11:59:00 02/04/03 (0)
  • Hello from sunny Peurto Plata - Peter Florance 08:50:24 02/04/03 (0)
  • Re: Impressions of Suspension Techniques sways - KSB 07:29:32 02/04/03 (0)
  • Re: Impressions of Suspension Techniques sways - Frank H 19:20:45 02/03/03 (0)
  • Re: Impressions of Suspension Techniques sways - Jeff C 15:01:48 02/03/03 (4)
    • Re: Impressions of Suspension Techniques sways - Jake Hall 15:06:02 02/03/03 (3)
      • Jake, did you get the gear? - Jeff C 19:41:45 02/03/03 (0)
      • Re: Impressions of Suspension Techniques sways - Blair 16:27:25 02/03/03 (1)
        • I Agree!!! - Eddie (To.,Ont.,Canada) 17:15:40 02/03/03 (0)
• Paging: Tom (Springs and Starter) - Mishast 13:22:35 02/03/03 (3)
  • thanks and more... - ...tom 16:52:12 02/03/03 (2)
    • Must have been an older unit - Misha 19:15:24 02/03/03 (1)
      • these drop the car 2" (eom) - ..tom 05:56:55 02/04/03 (0)
• ?: How do I check if my alternator is dying - Jim Race 13:09:07 02/03/03 (1)
  • Go down to you neighborhood battery..... - Misha 16:00:50 02/03/03 (0)
• Al in Oz - Nath in Tassie 22:18:32 02/02/03 (1)
  • Re: Al in Oz - AL from Oz 23:40:23 02/02/03 (0)
• Help! - Nath in Tassie 22:12:10 02/02/03 (1)
  • Re: Help! - Andrew 03:41:12 02/03/03 (0)
• Heater Control Valve - Lou in Denver 17:32:03 02/02/03 (4)
  • Re: Heater Control Valve - Jeff C 20:33:50 02/02/03 (1)
    • Re: Heater Control Valve - Lou in Denver 11:13:15 02/03/03 (0)
  • When it does, your floorboard is gone too !! - Jefflee 19:21:43 02/02/03 (0)
  • Can take a long time dying.... but they just>>> - Lars Bend Or... 18:46:18 02/02/03 (0)
• This weekends projects... - Tulsa Dave 17:05:38 02/02/03 (8)
  • did you find the right fan pulley? - Robert Bondi 21:15:24 02/02/03 (7)
    • Yep... (M30 water pump/fan clutch update) - Tulsa Dave 07:23:59 02/03/03 (4)
      • Re: Yep... (M30 water pump/fan clutch update) - Mark 08:58:24 02/03/03 (3)
        • I don't know what the service life of each type... - Tulsa Dave 10:45:47 02/03/03 (2)
          • My .02 - Mike W. 13:13:08 02/03/03 (1)
            • ETK shows the old style on U.S. E23s only... - Tulsa Dave 15:02:16 02/03/03 (0)
    • What??? She hasnt been retired has she??? - Scott 23:12:11 02/02/03 (1)
      • Re: What??? She hasnt been retired has she??? - Robert Bondi 00:06:28 02/03/03 (0)
• This balmy riding weather and I'm selling my K75S - Lars Bend Or 16:59:32 02/02/03 (0)
• Condon& Kelly Ins Info - Scott 16:53:50 02/02/03 (2)
  • link - Frank H 19:41:18 02/02/03 (1)
    • Thanks Frank! nt - Scott 20:43:54 02/02/03 (0)
• parting out 81 with red interior - Mark 14:16:07 02/02/03 (3)
  • OOPS, car is in Spokane Washington - Mark 14:35:20 02/02/03 (2)
    • Re: OOPS, car is in Spokane Washington - Lee Grover 09:49:29 02/03/03 (1)
      • Re: OOPS, car is in Spokane Washington - Lee G. 11:30:02 02/03/03 (0)
• The gremlin is back!!! :( - Andrew 03:47:19 02/02/03 (1)
  • Stop using those cheap batteries, Andrew!! - Remy Davison 07:27:42 02/02/03 (0)
• Auto Trans Shifter Cable - Chris 02:05:22 02/02/03 (4)
  • Re: Auto Trans Shifter Cable - Chris Hollis 07:36:56 02/02/03 (3)
    • 78 530i (more) - Chris 12:01:44 02/02/03 (2)
      • wow - Chris Hollis 14:22:31 02/02/03 (1)
        • Give it a tug... - Tom In MO 07:14:19 02/03/03 (0)
• Car of the Month - February 2003 - Troy Rudolph (Webmaster) 00:23:14 02/02/03 (4)
  • I Like It !! nt - Jefflee 17:34:33 02/03/03 (0)
  • Re: Car of the Month - February 2003 - Matt C 17:18:47 02/02/03 (0)
  • Very NICE! - Eddie (To.,Ont.,Canada) 17:07:05 02/02/03 (0)
  • Nice car Raphael! - Mr. Coffey 14:04:51 02/02/03 (0)
• did I screw up?? - Karl in KS 22:35:42 02/01/03 (3)
  • Re: did I screw up?? - Karl 21:10:06 02/03/03 (1)
    • Re: did I screw up?? - Kristopher Barrett 12:50:17 02/04/03 (0)
  • Re: did I screw up?? - Chris Hollis, Huntsville, AL 07:46:04 02/02/03 (0)
• Transmission question - JR --- 1978 635CSi 17:42:13 02/01/03 (14)
  • Re: Transmission question - Jake Hall 16:45:52 02/02/03 (0)
  • Re: Transmission question - Stan 20:47:23 02/01/03 (9)
    • Stan's right about the shifter. It needs to be> - Lars Bend Or 21:12:27 02/01/03 (8)
      • Shifter was mounted - JR --- 1978 635CSi 21:25:49 02/01/03 (7)
        • JR...Now I am confused and that ransmission could - Lars Bend Or 01:42:31 02/02/03 (6)
          • Let me explain further - JR--- 1978 635CSi 09:06:33 02/02/03 (5)
            • OK.. now I see.. - Lars 10:36:27 02/02/03 (4)
              • Re: OK.. now I see.. - Lee Cornett 15:23:46 02/02/03 (1)
                • Thank you very much - JR --- 1978 635CSi 16:42:30 02/02/03 (0)
              • my .02 - stewart 12:21:34 02/02/03 (0)
              • Re: OK.. now I see.. - Frank H 10:51:56 02/02/03 (0)
  • Why spend money on a CR trans.... - Lars Bend Or 18:58:46 02/01/03 (2)
    • dog leg is a better shift - james 06:34:14 02/02/03 (0)
    • Re: Why spend money on a CR trans.... - JR --- 1978 635CSi 19:31:38 02/01/03 (0)
• Hope all of you in Texas escaped... - Tulsa Dave 14:57:16 02/01/03 (1)
  • Re: Hope all of you in Texas escaped... - Scott 21:39:28 02/01/03 (0)
• You verse the Ins co, you win This time!!!!! - Scott 12:07:52 02/01/03 (5)
  • Know your car's value - Karl in KS 22:40:11 02/01/03 (0)
  • A fair settlement is all I ask for - Mike W. 16:49:14 02/01/03 (0)
  • Re: You verse the Ins co, you win This time!!!!! - Justin Webster 14:21:22 02/01/03 (2)
    • LOL, no J, that is unless your driving along... - Scott 21:27:40 02/01/03 (0)
    • When it comes to insurance... - Tulsa Dave 14:48:53 02/01/03 (0)
• insurance is a scam - greghill-phx,az 21:29:46 01/31/03 (9)
  • Re: insurance is a scam - zane 18:28:20 02/01/03 (1)
    • I use Condon & Skelly too - Frank H 10:54:56 02/02/03 (0)
  • Re: insurance is a scam - Mark 11:15:51 02/01/03 (1)
    • Re: insurance is a scam - Mike W. 16:39:47 02/01/03 (0)
  • Tough question, but easy answer if you would>>> - Greghill 10:23:41 02/01/03 (1)
    • Troy ... interesting this post... - Lars Bend Or 13:11:49 02/01/03 (0)
  • Re: insurance is a scam - Tulsa Dave 08:52:24 02/01/03 (0)
  • Re: insurance is a scam - Matt C 22:42:57 01/31/03 (1)
    • Re: insurance is a scam - stewart 00:38:24 02/01/03 (0)
• Seats--What to do? - Doug 17:38:46 01/31/03 (10)
  • Re: Seats--What to do? - Bob 18:43:44 02/03/03 (0)
  • Floor pans different after 1978 - Lars Bend Or 10:31:01 02/01/03 (6)
    • Re: Floor pans different after 1979 (attn Kaveman) - Mr. Coffey 11:35:37 02/01/03 (5)
      • Re: Floor pans different after 1979 (attn Kaveman) - Kaveman 18:03:59 02/01/03 (3)
        • Conversion? - Troy Rudolph 14:49:39 02/02/03 (1)
          • I haven't done it but... - Mr. Coffey 15:56:38 02/02/03 (0)
        • Useful info for all with earlier E12s - Mr. Coffey 14:07:18 02/02/03 (0)
      • E28's fit in my 79 - Mike W. 16:52:40 02/01/03 (0)
  • Re: Seats--What to do? - Jamie 09:24:49 02/01/03 (0)
  • Re: Seats--What to do? - Kristopher Barrett 17:58:34 01/31/03 (0)
• Seats--What to do? - Doug 17:38:34 01/31/03 (0)
• Leaking Fuel Injector Replacement - Brad in Texas 16:06:00 01/31/03 (6)
  • Re: Leaking Fuel Injector Replacement - Fred Fermin (SF,CA) 00:28:09 02/02/03 (0)
  • what Chris said, +... (longish) - ChuckNC 16:42:55 01/31/03 (1)
    • I'm not gone yet!!! - Peter Florance 18:25:06 01/31/03 (0)
  • Re: Leaking Fuel Injector Replacement - Chris Hollis, Huntsville, AL 16:30:21 01/31/03 (2)
    • Re: Leaking Fuel Injector Replacement - Brad In Texas 08:56:48 02/01/03 (1)
      • Do it this way - Mike W. 13:08:42 02/01/03 (0)
• e12 parts - Jamie Lyon 12:29:10 01/31/03 (2)
  • Re: e12 parts - Jamie Lyon 18:05:22 01/31/03 (0)
  • what diff.? 3.64 open or LSD? - billy in SLO 13:50:59 01/31/03 (0)
• WANTED. Thermal reactor for 76 530i - Matt C 09:36:05 01/31/03 (2)
  • Re: WANTED. Thermal reactor for 76 530i - Matt C 11:27:53 01/31/03 (1)
    • Re: WANTED. Thermal reactor for 76 530i - Randy Clark 12:59:01 01/31/03 (0)
• M. Mann... Did you recieve... - BMWBRYAN 09:25:25 01/31/03 (1)
  • Re: M. Mann... Did you recieve... - maria 16:25:25 01/31/03 (0)
• Any of you bidding on this..If so - Scott 08:51:47 01/31/03 (0)
• Looking for Dean in Phoenix,........ - Ray in Phoenix 08:34:10 01/31/03 (0)
• Missfire at high revs - Paul Goodfellow 23:40:07 01/30/03 (10)
  • Miss or bog down...kind of like a governor - Lars 01:02:32 01/31/03 (9)
    • Re: Miss or bog down...kind of like a governor - Matt C 09:34:03 01/31/03 (0)
    • Re: Miss or bog down...kind of like a governor - DanLafley 02:06:48 01/31/03 (7)
      • paul or dan? - Peter Florance 06:09:14 01/31/03 (2)
        • AFM - Dan Lafley 16:00:20 01/31/03 (0)
        • Its Dan! - Dan Lafley 15:55:50 01/31/03 (0)
      • Re: Miss or bog down...kind of like a governor - Nick, CO 05:50:02 01/31/03 (3)
        • Re: Miss or bog down...kind of like a governor - Peter Florance 06:02:25 01/31/03 (2)
          • Spark? - Dan Lafley 15:58:05 01/31/03 (1)
            • Re: Spark? - Chris Hollis, Huntsville, AL 16:40:03 01/31/03 (0)
• seats? - joe - portland, OR 21:16:32 01/30/03 (1)
  • All 5 series seats fit... but - Lars Bend Or 22:16:39 01/30/03 (0)
• Hydrogen Powered E12 - Troy Rudolph 20:39:32 01/30/03 (11)
  • DIY - Kristopher Barrett 12:30:57 01/31/03 (1)
    • See, just enough info to... - Don Daynes 13:44:07 01/31/03 (0)
  • No No No No No! - Chris Hollis, Huntsville, AL 08:35:54 01/31/03 (8)
    • Re: No No No No No! - Kristopher Barrett 16:32:02 01/31/03 (1)
      • I cann't stop laughing.............. - Chris Hollis 17:41:53 01/31/03 (0)
    • propane in car a/c = kaboom! - greghill-phx,az 14:49:09 01/31/03 (5)
      • Re: propane in car a/c = kaboom! - Chris Hollis, Huntsville, AL 16:13:59 01/31/03 (4)
        • I know several guys that are using it... - Tulsa Dave 17:43:06 01/31/03 (3)
          • I'm glad that......... - Chris Hollis 21:07:19 01/31/03 (2)
            • Like I said... - Tulsa Dave 08:45:23 02/01/03 (1)
              • Re: Like I said... - Chris Hollis, Huntsville, AL 19:26:58 02/01/03 (0)
• Bay Area Smog Day... - Kaveman 19:30:16 01/30/03 (2)
  • Re: Bay Area Smog Day... - Fred Fermin (SF,Ca) 15:12:28 02/01/03 (0)
  • Sign me up ! - Peter Claassen 11:00:59 01/31/03 (0)
• Exhaust - Andrew 19:04:53 01/30/03 (5)
  • Re: Exhaust - Eric Q 00:53:18 01/31/03 (0)
  • Re: Exhaust - Scott 21:03:42 01/30/03 (3)
    • Re: Exhaust - Andrew 21:23:28 01/30/03 (2)
      • Springs - Karl in KS 23:02:28 02/01/03 (0)
      • Re: Exhaust - Matt B 02:09:45 01/31/03 (0)
• color me 'gone' Saturday - Peter Florance - First Fives Dictator for Life 18:10:40 01/30/03 (5)
  • Re: color me 'gone' Saturday - Harold 23:12:04 01/31/03 (0)
  • where ya going? - Frank H 20:39:46 01/30/03 (1)
    • Dominican Republic - Peter Florance 06:05:02 01/31/03 (0)
  • Dad can I have the keys to the BMW and pool house? - Sam Schultz 18:46:23 01/30/03 (1)
    • We'll have to paint his rotors blue. nt - Kristopher Barrett 12:26:12 01/31/03 (0)
• Whats a 530i worth? - Maurice Fay 14:34:58 01/30/03 (2)
  • Re: Whats a 530i worth? - Eric Q 15:35:15 01/30/03 (0)
  • Your sanity? Your immortal soul? - Kristopher Barrett 15:23:54 01/30/03 (0)
• LSD Installed... - Kaveman 13:53:37 01/30/03 (3)
  • Which LSD did you install? b(nt) - Eddie (Tor., Ont. Canada) 07:38:41 01/31/03 (1)
    • Re: Which LSD did you install? b(nt) - Kaveman 11:12:22 01/31/03 (0)
  • Now you can steer with the throttle not the - Scott 21:00:11 01/30/03 (0)
• Email address for Maximilian's? - Remy Davison 07:52:23 01/30/03 (1)
  • Re: Email address for Maximilian's? - Tulsa Dave 08:15:11 01/30/03 (0)
• Complete power failure: always check the obvious. - Remy Davison 07:41:05 01/30/03 (1)
  • how odd - joe 21:12:36 01/30/03 (0)
• 1981 528i for FREE in Palmdale Calif area. - John in Simi Valley 23:38:23 01/29/03 (4)
  • Any Ideas how much it would cost to... - Scott 08:50:28 01/30/03 (1)
    • 40-50 cents a mile, last time I looked> - Lars 09:00:19 01/30/03 (0)
  • Re: 1981 528i for FREE in Palmdale Calif area. - Adam Wilson 00:30:36 01/30/03 (1)
    • Rust? Whats That??? - John in Simi Valley 01:03:02 01/30/03 (0)
• I hope noone here did this..... - Scott 21:34:05 01/29/03 (4)
  • Why doesn't he... - Tara 16:00:13 01/30/03 (2)
    • Thanks! - Tulsa Dave 17:09:07 01/30/03 (0)
    • Ouch! - Peter Florance 16:28:29 01/30/03 (0)
  • Re: I hope noone here did this..... - Peter Florance - Va Beach, VA 06:21:14 01/30/03 (0)
• Shifter Knob Thread Pitch? - Peter Florance 18:40:22 01/29/03 (13)
  • 15mm X 1.5 - Jeff F 19:49:19 01/29/03 (12)
    • Thank you for the info. - Jeff C 12:30:08 01/30/03 (10)
      • That is old news.... - Tom in MO 08:33:08 01/31/03 (0)
      • Oh come on... - Tulsa Dave 22:33:47 01/30/03 (8)
        • He met Don Daynes - Peter Florance 06:06:31 01/31/03 (7)
          • Alright... - Don Daynes 11:18:05 01/31/03 (0)
          • I met Don too... - Tulsa Dave 07:04:10 01/31/03 (5)
            • Yeah, just do some really cool mod to your car - Peter Florance 07:45:17 01/31/03 (4)
              • Re: Yeah, just do some really cool mod to your car - Don Daynes 13:40:22 01/31/03 (0)
              • Hmmmmmm. Wonder what I could do? - Tulsa Dave 08:44:43 01/31/03 (2)
                • See, that's the hard part... - Don Daynes 11:11:40 01/31/03 (1)
                  • What is all this talk? (long because of update) - Jeff C 13:51:04 01/31/03 (0)
    • Thanks! (nt) - Peter Florance 20:27:44 01/29/03 (0)
• A warning - Al from Oz 17:03:53 01/29/03 (6)
  • Al...How did you pay??? - Scott 18:06:57 01/29/03 (1)
    • Re: Al...How did you pay??? - Al from Oz 19:45:59 01/29/03 (0)
  • Re: A warning - Kristopher Barrett 17:10:25 01/29/03 (0)
  • Re: A warning - Tara Knowles 17:08:02 01/29/03 (2)
    • agreed... - Lenny D. 17:11:38 01/29/03 (1)
      • More. - Al from Oz 20:00:44 01/29/03 (0)
• Hard to start - Lou in Denver 09:21:33 01/29/03 (9)
  • Re: Hard to start - Matt C 10:11:01 01/29/03 (8)
    • Re: Hard to start - Lou in Denver 11:25:44 01/29/03 (7)
      • Re: Hard to start - Peter Florance 11:51:53 01/29/03 (6)
        • ...and... - Lenny D. 13:13:43 01/29/03 (5)
          • ? - Troy Rudolph 16:08:42 01/29/03 (4)
            • should have both - Peter Florance 16:55:06 01/29/03 (3)
              • Re: should have both... - Lenny D. 17:08:19 01/29/03 (2)
                • Both for early models - Peter Florance 17:26:14 01/29/03 (1)
                  • Re: Both for early models - Lenny D. 17:30:29 01/29/03 (0)
• Backfare - Dan Lafley 23:31:34 01/28/03 (4)
  • Re: Backfare - Peter Florance 06:53:44 01/29/03 (3)
    • Timing is fine, the AFM isnt very smooth NT - Dan lafley 11:18:44 01/30/03 (2)
      • Re: Timing is fine, the AFM isnt very smooth NT - Peter Florance 12:40:37 01/30/03 (1)
        • unless - Peter Florance 12:41:21 01/30/03 (0)
• 68.3/4 MPH - John in Antioch 23:17:29 01/28/03 (0)
• How to remove starter? - T-Raz 16:40:09 01/28/03 (6)
  • the perfect tool is a starter wrench - Robert Bondi 00:32:30 01/29/03 (1)
    • ditto on the obstruction wrenches...n/m - Fred Fermin 00:37:53 01/29/03 (0)
  • Top nut is not on a stud, but on a bolt that> - Lars Bend Or 22:32:48 01/28/03 (0)
  • 17 mm stubby, or - ...tom 17:57:35 01/28/03 (1)
    • Re: 17 mm stubby, or - T-Raz 19:33:49 01/28/03 (0)
  • Re: How to remove starter? - Lenny D. 17:33:40 01/28/03 (0)
• Misha - starter pic and springs question - ...tom 15:58:27 01/28/03 (2)
  • Couldn't get to the pics - Misha 11:52:18 01/31/03 (1)
    • try this link - ...tom 17:03:00 01/31/03 (0)
• Automatic tranny, 1979 e12 available - Kristopher Barrett 14:13:53 01/28/03 (8)
  • How long will you have it? - Dan Lafley 20:13:21 01/28/03 (1)
    • Re: How long will you have it? - Kristopher Barrett 16:15:56 01/29/03 (0)
  • Re: Automatic tranny, 1979 e12 available - Dan Lafley 15:53:22 01/28/03 (4)
    • Re: Automatic tranny, 1979 e12 available - Kristopher Barrett 16:57:52 01/28/03 (0)
    • check your email ( nt ) - Kristopher Barrett 16:54:30 01/28/03 (2)
      • Thats Odd - Dan Lafley 17:27:54 01/28/03 (0)
      • Don't check your email ( nt ) - Kristopher Barrett 17:19:12 01/28/03 (0)
  • Oops...just the auto tranny. nt - Kristopher Barrett 14:30:02 01/28/03 (0)
• Sean, Peter and the rest of you... - billy in SLO 23:40:51 01/27/03 (4)
  • Re: Sean, Peter and the rest of you... - Peter Claassen 19:36:47 01/30/03 (0)
  • Good choice! - Don Daynes 01:46:53 01/28/03 (0)
  • Sounds Good! - Kaveman 00:18:29 01/28/03 (0)
  • You won't be sorry - Mike W. 00:14:40 01/28/03 (0)
• AFM - Dan Lafley 22:16:27 01/27/03 (0)
• Anyone in or near Boise Idaho? - Mark 21:04:07 01/27/03 (1)
  • Wheels are gone - Mark 20:37:56 01/28/03 (0)
• Wat petrol in my '83 2.8?? - Andrew 18:57:51 01/27/03 (16)
  • Re: Wat petrol in my '83 2.8?? - Nath in Tassie 21:40:43 01/28/03 (1)
    • Another double post up - Nath in Tassie 21:45:04 01/28/03 (0)
  • Re: Wat petrol in my '83 2.8?? - Nath in Tassie 21:39:36 01/28/03 (0)
  • Al: Unleaded high octane v. octane booster? - Remy Davison 08:19:18 01/28/03 (6)
    • Optimax - Al from Oz 15:56:10 01/28/03 (4)
      • Optimax...more - Al from Oz 16:56:13 01/28/03 (1)
        • Thamks for the info, Al - Remy Davison 08:47:43 01/29/03 (0)
      • Optimax...more - Al from Oz 16:55:43 01/28/03 (1)
        • Oops! .......sorry, double post!! - Al 16:57:42 01/28/03 (0)
    • Interesting Stuff... - Tom In MO 12:59:57 01/28/03 (0)
  • Best fuel in Oz - Al from Oz 06:15:11 01/28/03 (2)
    • BP Ultimate is better - ckn 17:20:09 01/29/03 (1)
      • Valvemaster? - Peter Florance 18:47:28 01/29/03 (0)
  • Where are you located?? - Scott 19:11:01 01/27/03 (2)
    • Re: Where are you located?? - Mike W. 23:36:13 01/27/03 (0)
    • Re: Don't use leaded gas, bad for o2 sensor NT - Blair 20:37:23 01/27/03 (0)
• Paging Lee Cornett...Rear headrest on ebay... - Scott 18:02:32 01/27/03 (1)
  • Re: Paging Lee Cornett...Rear headrest on ebay... - Andrew 18:54:47 01/27/03 (0)
• Progress... - Kaveman 17:39:38 01/27/03 (7)
  • Re: Progress... - Michael Kucan 09:13:45 01/28/03 (0)
  • Re: Progress... - Michael Kucan 18:25:50 01/27/03 (5)
    • Re: Progress... - Kaveman 18:46:35 01/27/03 (4)
      • Re: Progress... - Michael Kucan 14:09:10 01/28/03 (2)
        • Let us see if I can get this right... - Tulsa Dave 15:57:38 01/28/03 (1)
          • Re: Let us see if I can get this right... - Michael Kucan 17:57:55 01/28/03 (0)
      • From the faq... - Tulsa Dave 21:11:57 01/27/03 (0)
• emails to Frank, Jim, Mark or anyone else? - billy in SLO 12:50:29 01/27/03 (1)
  • Re: emails to Frank, Jim, Mark or anyone else? - mark 14:51:22 01/27/03 (0)
• Wiper blade mechanism frozen? - Allen 12:37:53 01/27/03 (2)
  • Used Wiper blade motor for sale - Craig Day 16:34:28 01/27/03 (0)
  • gummy grease inside motor - Peter Florance 12:53:26 01/27/03 (0)
• Installed new starter and All Hell Broke Loose.... - Misha 11:48:15 01/27/03 (8)
  • two spades on starter - ...tom 11:58:39 01/27/03 (5)
    • Re: two spades on starter - Misha 13:20:21 01/27/03 (4)
      • check for a 3rd spade - ...tom 13:29:13 01/27/03 (3)
        • Can you verify Prt# as well: SR95X - Misha 14:32:17 01/27/03 (2)
          • checked 3 starters for m30s - ...tom 16:03:32 01/27/03 (1)
            • Interesting. The unit I have..... - Misha 11:53:46 01/28/03 (0)
  • Re: Installed new starter and All Hell Broke Loose.... - Kristopher Barrett 11:53:56 01/27/03 (1)
    • Maybe try E34 starter - Remy Davison 08:41:30 01/28/03 (0)
• Almost afraid to ask.. - Al 08:55:13 01/27/03 (5)
  • get under car behind the wheel and kick out... - CD 17:03:19 01/27/03 (0)
  • Get a big rubber mallet....(nt) - Kristopher Barrett 13:15:21 01/27/03 (0)
  • Re: Almost afraid to ask.. - Stan 09:49:49 01/27/03 (1)
    • Re: Almost afraid to ask.. - Ryan 10:46:05 01/27/03 (0)
  • Re: Almost afraid to ask.. - Klaus 09:48:53 01/27/03 (0)
• Alpina 3.5 FS - Blair 00:12:39 01/27/03 (1)
  • Re: Alpina 3.5 FS - Chris Hollis, Huntsville, AL 08:25:59 01/27/03 (0)
• source for glove box latch - Mark 22:07:04 01/26/03 (1)
  • Also look at Maximillian for stuff like this... - Tulsa Dave 07:11:41 01/27/03 (0)
• 5 Speed Install Question - Chris 19:18:44 01/26/03 (4)
  • Try jacking the oilpan to get the right angle? - rexmo 11:19:14 01/28/03 (0)
  • Re: 5 Speed Install Question - karl sisson 07:13:28 01/27/03 (1)
    • Bolts - Chris 11:35:27 01/27/03 (0)
  • Re: 5 Speed Install Question - Jeff C 20:53:56 01/26/03 (0)
• Thanks guys - Nath in Tassie 17:56:14 01/26/03 (3)
  • love the sound - Peter Florance 14:05:57 01/27/03 (0)
  • I thought you guys used a map.... - Tulsa Dave 07:05:59 01/27/03 (1)
    • Re: I thought you guys used a map.... - Nath in Tassie 16:59:42 01/27/03 (0)
• What engine parts are good w/cracked head... - Ryan Bryan 16:12:12 01/26/03 (3)
  • What kind of flywheel does it have? - Robert Holly 19:12:23 01/26/03 (1)
    • Re: What kind of flywheel does it have? - Ryan Bryan 19:41:43 01/26/03 (0)
  • Re: What engine parts are good w/cracked head... - Mike W. 17:12:33 01/26/03 (0)
• Aux Air Valve update - Brian in Abilene 14:49:02 01/26/03 (14)
  • Sorry, just shipped AAV east. However - Lars 00:18:03 01/28/03 (2)
    • Thanks, Lars, I've got another one lined up... - Brian in Abilene 09:35:50 01/28/03 (1)
      • 79 won't fit - Peter Florance 06:39:27 01/30/03 (0)
  • Hey Texican........... - Chris Hollis 20:17:50 01/26/03 (6)
    • Yeah, ordered one last night for $60....oh well. - Brian in Abilene 09:06:09 01/27/03 (5)
      • Re: Yeah, ordered one last night for $60....oh well. - Chris Hollis, Huntsville, AL 11:02:17 01/27/03 (2)
        • Hey Chris...try bimmerpartsco.com - Brian in Abilene 23:39:11 01/27/03 (0)
        • last month... - greghill-phx,az 11:26:54 01/27/03 (0)
      • Re: Yeah, ordered one last night for $60....oh well. - Chris Hollis, Huntsville, AL 11:02:11 01/27/03 (1)
        • sorry nt - chris 11:03:10 01/27/03 (0)
  • Re: Aux Air Valve update - dale 19:01:56 01/26/03 (0)
  • Re: Aux Air Valve update - Mike W. 17:18:04 01/26/03 (2)
    • Thanks. I may end up just buying one. - Brian in Abilene 19:40:11 01/26/03 (1)
      • Try online vendors, Car Parts to Go, and - Mike W. 20:06:32 01/26/03 (0)
• Was this ever displayed here (Bit OT) - Lars Bend Or 14:25:55 01/26/03 (3)
  • Got Eraser ??? nt - Jefflee 21:47:03 01/26/03 (0)
  • Trick, I like it (NT) - Mike W. 17:21:44 01/26/03 (0)
  • thats cool, but it hurts my eyes(nt) - Ryan 15:11:50 01/26/03 (0)
• Looking for one really damaged piston w/connecting - Duke - 85 M535i/Hartge 07:34:49 01/26/03 (1)
  • Karnak sees... - Karl in KS 22:10:18 01/27/03 (0)
• $20 for seats from a '79 733i - Eric Q 04:09:53 01/26/03 (0)
• Rear Headrests - Lee Cornett 20:31:25 01/25/03 (1)
  • Re: Rear Headrests - Don Daynes 22:57:37 01/25/03 (0)
• A little good news....and some not so good news... - Scott 19:41:17 01/25/03 (0)
• How about holding '03 'Fest in memory of. . . - Shifty Brad from the e28 board 16:58:19 01/25/03 (15)
  • More about Mark's death... - Robert Holly 22:02:50 01/25/03 (0)
  • Michel Potheau! - Peter Florance 17:23:22 01/25/03 (1)
    • I agree, And a suggestion If I may... - Scott 19:27:47 01/25/03 (0)
  • BTW, if anyone wants to help out with 5er Fest. . - Shifty Brad from the e28 board 16:59:59 01/25/03 (11)
    • Re: BTW, if anyone wants to help out with 5er Fest. . - Jim Davis - 5er Fest 2002 Treasurer 23:01:48 01/25/03 (2)
      • He asked on the e28 board (more) - Shifty Brad from the e28 board 23:05:21 01/25/03 (1)
        • Oh, okay. I just posted volunteering again...(nt) - Jim Davis 23:19:06 01/25/03 (0)
    • Re: BTW, if anyone wants to help out with 5er Fest - Robert Holly 22:12:40 01/25/03 (3)
      • EXCELLENT! I'm e-mailing this to Ryan now (eom) - Shifty Brad from the e28 board 22:29:12 01/25/03 (0)
      • Thanks Robert (more re: e12 racer) - Peter Florance - First Fives Dictator for Life 22:19:59 01/25/03 (1)
        • Re: Thanks Robert (more re: e12 racer) - Robert Holly 19:13:45 01/26/03 (0)
    • Re: BTW, if anyone wants to help out with 5er Fest. . - Peter Florance 17:30:36 01/25/03 (3)
      • Do me a favor. . . - Shifty Brad from the e28 board 21:09:51 01/25/03 (2)
        • That was me you told Peter (nt) - Jim Davis 22:53:35 01/25/03 (0)
        • check yer mail - Peter Florance - First Fives Dictator for Life 22:23:35 01/25/03 (0)
• Test message - Peter Florance 16:32:42 01/25/03 (2)
  • So you're the one... - Tulsa Dave 18:39:05 01/25/03 (1)
    • Probably - Peter Florance 19:33:59 01/25/03 (0)
• More on ICU? - Brian in Abilene 15:32:58 01/25/03 (7)
  • Re: More on ICU? - Jimi 10:40:15 01/26/03 (0)
  • Another Update - Brian in Abilene 16:34:24 01/25/03 (5)
    • Re: Another Update - Peter Florance 17:20:11 01/25/03 (4)
      • Nope, didn't test it...couldn't find instuctions - Brian in Abilene 21:01:34 01/25/03 (3)
        • Freeze it - Peter Florance 22:16:19 01/25/03 (2)
          • I'll freeze it, and report back. I should be able - Brian in Abilene 22:20:57 01/25/03 (1)
            • Re: I'll freeze it, and report back. I should be able - Peter Florance 22:24:20 01/25/03 (0)
• Tire Size 225/60/15? - Klaus 15:26:26 01/25/03 (8)
  • Re: Tire Size 225/60/15? - Kaveman 12:43:08 01/26/03 (0)
  • Tires and wheels - Mike W. 23:26:05 01/25/03 (0)
  • Ask Kaveman... - Eric Q 21:22:25 01/25/03 (5)
    • I've got 225/50 15 w/out any probs nt - stewart 01:08:12 01/26/03 (1)
      • Re: I've got 225/50 15 w/out any probs nt - Eric Q 03:16:00 01/26/03 (0)
    • Re: Ask Kaveman... - Klaus 23:07:22 01/25/03 (1)
      • Re: Ask Kaveman... - Eric Q 03:14:30 01/26/03 (0)
    • Re: Ask Kaveman... - pumpkin 22:03:23 01/25/03 (0)
• Water pump conversion follow up... - Tulsa Dave 13:59:03 01/25/03 (10)
  • Ooops... - Tulsa Dave 15:19:10 01/25/03 (9)
    • another pulley difference - Robert Bondi 18:28:11 01/25/03 (8)
      • Robert, You bailed on the upgrade ??? - Scott 19:45:41 01/25/03 (1)
        • no - Robert Bondi 02:25:56 01/26/03 (0)
      • $60? So much for the savings... - Tulsa Dave 18:37:19 01/25/03 (5)
        • 0.4mm? - Robert Bondi 02:30:34 01/26/03 (4)
          • Not the center hole... - Tulsa Dave 09:35:59 01/26/03 (3)
            • cool down pulley? - Peter Florance 09:59:12 01/26/03 (2)
              • Metric Mechanic has them... - Tulsa Dave 10:23:43 01/26/03 (1)
                • Still need a pulley... - Tulsa Dave 10:26:09 01/26/03 (0)
• Rear Wheel Bearings- re-pack & replace - Jimi 10:27:59 01/25/03 (2)
  • Re: Rear Wheel Bearings- re-pack & replace - Kristopher Barrett 12:54:45 01/27/03 (0)
  • Re: Rear Wheel Bearings- re-pack & replace - Peter Florance 22:28:51 01/25/03 (0)
• following up - 5keta 01:10:59 01/25/03 (0)
• bad news from the shop - billy in San Luis Obispo, CA aka SLO 22:24:47 01/24/03 (7)
  • Re: bad news from the shop - jim in sd 04:07:02 01/26/03 (0)
  • Options - Mike W. 12:52:39 01/25/03 (0)
  • Re: bad news from the shop - ChuckNC 11:17:36 01/25/03 (0)
  • Re: bad news from the shop - Robert Holly 09:48:27 01/25/03 (0)
  • Here's what may seem like a wierd idea.... - Lars Bend Or 01:05:29 01/25/03 (0)
  • Re: bad news from the shop - Mark 22:58:06 01/24/03 (1)
    • Re: bad news from the shop - Blair 00:49:50 01/25/03 (0)
• Hit Counters Free - Lore 20:02:13 01/24/03 (1)
  • complaint sent - Spam Slammer 07:31:29 01/25/03 (0)
• Progress on interior -- New dash is in - Jeff C 18:58:30 01/24/03 (3)
  • Re: Progress on interior -- New dash is in - Kristopher Barrett 12:14:39 01/27/03 (0)
  • Care to share the cost on the interior work? - Tulsa Dave 19:29:30 01/24/03 (1)
    • Sure... also any help with windshield would help - Jeff C 16:27:38 01/25/03 (0)
• original style tires - matt 18:24:16 01/24/03 (5)
  • Re: original style tires - Eric Q 19:59:59 01/24/03 (1)
    • Re: original style tires - Jim Davis 11:50:19 01/25/03 (0)
  • Michelin XVS 190R70-14 - Troy Rudolph 19:36:57 01/24/03 (2)
    • Pictures of classic tires - Eric Q 20:08:39 01/24/03 (1)
      • XDX - Peter Florance 14:46:07 01/25/03 (0)
• ICU was bad - Jimi 16:51:19 01/24/03 (3)
  • Re: here here, another E12 running smoothly.... NT - Blair 00:51:18 01/25/03 (0)
  • doesn't that feel good? - Peter Florance 18:03:02 01/24/03 (1)
    • Re: doesn't that feel good? - Jimi 10:24:19 01/25/03 (0)
• Shock tower rust, any suggestions?!? - Blair 14:59:35 01/24/03 (3)
  • Re: Shock tower rust, any suggestions?!? - Derek 16:21:11 01/24/03 (2)
    • Re: so you compleatly..... - Blair 16:43:34 01/24/03 (1)
      • I know in a month or 2 have some FS - Sam Schultz 18:10:47 01/24/03 (0)
• electrical system schematic - igallop 13:55:16 01/24/03 (4)
  • Found one!!!! - BMWBRYAN 09:57:20 01/27/03 (0)
  • Re: electrical system schematic /This might help!! - BMWBRYAN 17:43:23 01/24/03 (1)
    • Re: electrical system schematic /This might help!! - M Mann 18:27:03 01/24/03 (0)
  • Re: Get a 'Hayes' manual, it has one........ NT - Blair 14:31:17 01/24/03 (0)
• thermal time out switch - Maria 13:23:26 01/24/03 (5)
  • Re: thermal time out switch - Peter Florance 18:07:18 01/24/03 (2)
    • Another thought... - Tulsa Dave 18:19:40 01/24/03 (1)
      • Re: Another thought... - igallop 18:39:27 01/24/03 (0)
  • Could be... - Tulsa Dave 16:56:48 01/24/03 (1)
    • here, here to the board of govenors! - igallop! 18:41:22 01/24/03 (0)
• E12 based 6er exhaust revisited - Bob/E12 6er 11:41:08 01/24/03 (10)
  • Re: E12 based 6er exhaust revisited - Eric Q 15:38:25 01/24/03 (6)
    • Re: E12 based 6er exhaust revisited - Bob/E12 6er 16:54:24 01/24/03 (4)
      • P.S. - Eric Q 19:52:43 01/24/03 (0)
      • Not sure but... - Eric Q 19:41:43 01/24/03 (2)
        • Re: Not sure but... - JR --- 1978 635CSi 16:14:36 01/25/03 (0)
        • A loud stereo will cure the droning problem (nt) - Tulsa Dave 19:43:59 01/24/03 (0)
    • Where can you get dual resonators? - JR --- 1978 635CSi 16:08:01 01/24/03 (0)
  • Re: E12 based 6er exhaust revisited - Tom in MO 11:52:16 01/24/03 (2)
    • technically speaking....kinda long - stewart 12:45:18 01/24/03 (1)
      • SMOG update, I'm in CA, still need Cat to pass. - Bob/E12/6er 13:25:40 01/24/03 (0)
• COLD start - Chris Hollis, Huntsville, AL 06:53:40 01/24/03 (2)
  • Re: COLD start - Jeff C 10:36:40 01/24/03 (0)
  • Re: COLD start - Jeff C 10:36:39 01/24/03 (0)
• Frank H, I emailed you. - billy in San Luis Obispo, CA aka SLO 00:36:55 01/24/03 (0)
• 2.8 6cyl. - Nath in tassie 21:00:12 01/23/03 (5)
  • what about Al in Oz? - Peter Florance 06:30:44 01/24/03 (0)
  • It not a good motor, its a great one (more) - Mike W. 22:57:06 01/23/03 (3)
    • Downdraft Webers? - Troy Rudolph 10:53:13 01/24/03 (2)
      • Re: Downdraft Webers? Yes....... - Blair 14:33:46 01/24/03 (1)
        • Re: Downdraft Webers? Yes....... - Troy Rudolph 14:58:01 01/24/03 (0)
• 2.8 6cyl. - Nath in tassie 20:57:14 01/23/03 (0)
• ICU Questions - Jimi 20:24:07 01/23/03 (4)
  • Re: ICU Questions - Chris Hollis, Huntsville, AL 06:41:53 01/24/03 (0)
  • Re: ICU Questions - Peter Florance 22:03:15 01/23/03 (2)
    • Re: ICU Questions (could check other things first) - Walt Barie 07:18:43 01/24/03 (1)
      • Re: ICU Questions (could check other things first) - Peter Florance 07:35:16 01/24/03 (0)
• 75 528 - Nath in tassie 17:58:46 01/23/03 (3)
  • Re: 75 528 - Cristian in Sydney 19:53:27 01/23/03 (1)
    • Hey Cristian - Peter Florance 22:04:48 01/23/03 (0)
  • Re: 75 528 - Peter Florance 18:28:32 01/23/03 (0)
• No spark-re-write - Jimi 17:42:19 01/23/03 (5)
  • Re: No spark-re-write - Jimi 18:28:33 01/23/03 (0)
  • Re: No spark-re-write - Peter Florance 18:27:07 01/23/03 (3)
    • Re: No spark-re-write - to Peter - Jimi 19:01:32 01/23/03 (2)
      • Re: No spark-re-write - to Peter - Peter Florance 22:01:30 01/23/03 (1)
        • Re: No spark-re-write - to Peter -THANKS - Jimi 22:52:49 01/23/03 (0)
• No spark to coil .. what is the problem/solution - Jimi 17:33:29 01/23/03 (1)
  • Re: No spark to coil .. what is the problem/solution - M. Mann 17:40:34 01/23/03 (0)
• ECU Question for the experts - Jimi 16:28:03 01/23/03 (3)
  • -118 or -122 will work for you! (eom) - Troy Rudolph 16:38:26 01/23/03 (2)
    • Re: -118 or -122 -from what car is the 122 - Jimi 17:18:46 01/23/03 (1)
      • 80-81 528i (nt) - Peter Florance 17:30:36 01/23/03 (0)
• anybody w/ rear springs? - stewart 15:49:15 01/23/03 (0)
• need advive NOW please - billy in SLO 15:31:37 01/23/03 (10)
  • Re: need advive NOW please - Mark 22:21:41 01/23/03 (1)
    • And #3 and #6 too. Oh my eyes. nt - Jefflee 23:02:11 01/23/03 (0)
  • Re: need advive NOW please - Frank H 19:20:20 01/23/03 (2)
    • I'm with Frank on this one... - Tulsa Dave 19:48:30 01/23/03 (0)
    • Woops... this is what Alpina valves look like - Frank H 19:22:43 01/23/03 (0)
  • Re: Alpina Numbers - Cristian In Sydney - Oz 17:05:06 01/23/03 (1)
    • thankyou, don't bother looking that hard. - billy in SLO, CA 17:16:42 01/23/03 (0)
  • #4???? - Tom in MO 15:39:52 01/23/03 (2)
    • Re: #4???? - Peter Florance 16:11:20 01/23/03 (0)
    • Re: #4???? yea, lookes like....... - Blair 16:10:28 01/23/03 (0)
• Cold running - Ryan Border 13:16:25 01/23/03 (5)
  • Re: Cold running - - Tom in NY 07:52:05 01/24/03 (0)
  • Check for vacuum leaks - Mike W. 23:12:37 01/23/03 (0)
  • Cold Start Valve? - Tom in MO 14:02:01 01/23/03 (2)
    • more likely... - Lenny D. 16:10:27 01/23/03 (1)
      • Doh....wrong valve - Tom in MO 07:18:25 01/24/03 (0)
• 3.5L on the E12 (my impressions) - Peter Florance 09:27:21 01/23/03 (15)
  • Re: 3.5L on the E12 (my impressions) - Blair 11:27:06 01/23/03 (13)
    • actually, I believe the 530 auto had a 3.64 and - billy 11:57:26 01/23/03 (12)
      • According to the Big Blue Book ... - Troy Rudolph 14:34:07 01/23/03 (11)
        • Re: OK, so........ - Blair 15:06:46 01/23/03 (10)
          • Speedo Gear - Troy Rudolph 15:09:32 01/23/03 (9)
            • Re: Speedo Gear - Frank H 15:12:09 01/23/03 (8)
              • Bad Assumption - Troy Rudolph 15:40:47 01/23/03 (7)
                • Re: Bad Assumption - Blair 16:06:56 01/23/03 (0)
                • Re: Bad Assumption - Peter Florance 16:06:49 01/23/03 (5)
                  • Speedo Confusion - karl sisson 17:08:51 01/23/03 (2)
                    • I researched this - Peter Florance 17:31:45 01/23/03 (1)
                      • Re: I researched this - karl sisson 19:33:08 01/23/03 (0)
                  • Re: happen to know the codes? :) NT - Blair 16:12:06 01/23/03 (1)
                    • Re: happen to know the codes? :) NT - Peter Florance 22:28:12 01/23/03 (0)
  • how was your Euro 2.8 pretty hot?(nt) - billy 10:09:12 01/23/03 (0)
• Speaking of the cold... - Tulsa Dave 09:16:19 01/23/03 (0)
• It's so cold up here...... - karl sisson 22:35:59 01/22/03 (11)
  • Brrr...I hate it when its below 55 at night... - Eric Q 13:41:22 01/23/03 (0)
  • Re: It's so cold up here......-32 C = -26 F in... - Derek 09:15:56 01/23/03 (5)
    • I'm giving Castrol's synthetic 5W-50 a try... - Tulsa Dave 09:17:53 01/23/03 (4)
      • Synthetic + High Mileage = Bad ??? - Derek 10:45:05 01/23/03 (3)
        • Re: Synthetic + High Mileage = Maybe - Troy Rudolph 15:08:04 01/23/03 (1)
          • Re: Synthetic + High Mileage = Maybe - Frank H 15:17:38 01/23/03 (0)
        • Hadn't heard that... - Tulsa Dave 12:15:25 01/23/03 (0)
  • Re: It's so cold up here...... - T. Han 02:27:29 01/23/03 (3)
    • Re: It's so cold up here...... - karl sisson 07:56:44 01/23/03 (2)
      • 9 degrees here this morning.... - Tulsa Dave 09:12:52 01/23/03 (0)
      • It's so cold DOWN here... - Jeff C 08:47:07 01/23/03 (0)
• How cold is it? Pity me please..... - Brian in Montreal 21:29:06 01/22/03 (2)
  • It was so cold today...only up to 55* brrrr - Ryan in GA 02:02:47 01/23/03 (0)
  • Re: How cold is it? you should move....... - Blair 21:46:24 01/22/03 (0)
• Hey Man...You've got balmy weather... - karl sisson 20:40:23 01/22/03 (0)
• 2.8L oil pump vs. 3.5L swap delima continues.... - Tulsa Dave 20:31:54 01/22/03 (9)
  • Re: 2.8L oil pump vs. 3.5L swap delima continues.... - Troy Rudolph 10:02:57 01/23/03 (0)
  • euro bumpers - ...tom 06:05:53 01/23/03 (0)
  • Depends on the year - Mike W. 23:29:20 01/22/03 (0)
  • That 2.8L Euro w/newish head in St. Louis , , , - Jefflee 22:56:44 01/22/03 (0)
  • bumpers??? - Lars Bend Or 21:17:06 01/22/03 (3)
    • Re: he means...... - Blair 21:49:01 01/22/03 (2)
      • Yes... - Tulsa Dave 22:48:26 01/22/03 (1)
        • Sorry.. Geez, you'd think with all the cars I have - Lars 00:40:47 01/23/03 (0)
  • Ooops... - Tulsa Dave 20:33:32 01/22/03 (0)
• Need to clean the Garage Out! - Kaveman 19:01:09 01/22/03 (6)
  • Looks like the springs are in Vernon, CA... - Tulsa Dave 20:28:23 01/22/03 (0)
  • No, you need to move. - Al from Oz 19:30:11 01/22/03 (4)
    • All he needs to do is drie 400 miles south - Eric Q 13:44:02 01/23/03 (0)
    • I understand we can't even get work permits , , , - Jefflee 23:00:11 01/22/03 (2)
      • Re: I understand we can't even get work permits , , , - Al from Oz 23:42:27 01/22/03 (1)
        • Re: I understand we can't even get work permits , , , - Kristopher Barrett 15:38:00 01/23/03 (0)
• Looking at an '81 528i donor today. - Al from Oz. 18:39:18 01/22/03 (3)
  • UPDATE - Al from Oz 23:35:21 01/22/03 (2)
    • Re: UPDATE - Remy Davison 08:08:16 01/23/03 (1)
      • Re: UPDATE - Al from Oz 15:05:14 01/23/03 (0)
• Mission Complete: Heater Valve 77 530i - Dave 16:48:15 01/22/03 (3)
  • Re: Mission Complete: Heater Valve 77 530i - Kaveman 18:55:08 01/22/03 (2)
    • Re: Mission Complete: Heater Valve 77 530i - Jeff C 21:30:51 01/22/03 (0)
    • Re: Mission Complete: Heater Valve 77 530i - Kaveman 18:56:00 01/22/03 (0)
• Gas light or guage?????????? - Blair 14:59:30 01/22/03 (2)
  • Trust the light - Mike W. 23:36:55 01/22/03 (0)
  • Tap the side of your dash....... - Misha 15:47:14 01/22/03 (0)
• 528i intake manifold on a 3.5 engine - Ray in Phoenix 14:52:46 01/22/03 (1)
  • Re: 528i intake manifold on a 3.5 engine - Blair 17:10:27 01/22/03 (0)
• Kicking the dead horse...again (long) - billy in SLO 14:34:03 01/22/03 (10)
  • New head on old block - T-Raz 13:53:24 01/23/03 (0)
  • Re: Kicking the dead horse...again (long) - Troy Rudolph 15:56:52 01/22/03 (8)
    • thanks Troy OBTW - billy 16:25:47 01/22/03 (7)
      • Watching what you do with much interest... - Tulsa Dave 20:24:03 01/22/03 (0)
      • Re: thanks Troy OBTW - Peter Florance 17:38:42 01/22/03 (0)
      • Re: thanks Troy OBTW - Blair 17:13:29 01/22/03 (4)
        • wow, that's amazing - billy 22:22:26 01/22/03 (3)
          • Smog and more - Mike W. 00:03:26 01/23/03 (2)
            • why "concerned w/284 cam in either"? - billy 10:15:17 01/23/03 (1)
              • Re: why "concerned w/284 cam in either"? - Mike W. 23:39:21 01/25/03 (0)
• Bosch distributor - Dusan Vacval 13:57:11 01/22/03 (2)
  • I could be wrong, but - Mike W. 00:08:12 01/23/03 (1)
    • Kragen/Checker/Schucks - Todd 11:10:46 01/24/03 (0)
• M30 water pump question... - Tulsa Dave 11:41:10 01/22/03 (9)
  • Re: M30 water pump question... - Robert Bondi 22:31:49 01/23/03 (2)
    • Thanks for the info Robert... - Tulsa Dave 23:22:14 01/23/03 (0)
    • archive link - Robert Bondi 22:57:03 01/23/03 (0)
  • Re: M30 water pump question... - Troy Rudolph 11:55:50 01/22/03 (5)
    • Thanks Troy... - Tulsa Dave 20:21:09 01/22/03 (0)
    • The thin 32mm Wrench???? - Lars Bend Or 12:50:38 01/22/03 (3)
      • Re: The thin 32mm Wrench???? - Frank H 15:49:32 01/22/03 (2)
        • I've used an SAE to do this in the past... - Tulsa Dave 15:52:33 01/22/03 (1)
          • Channellocks or crescent wrench works for me (NT) - Mike W. 00:10:44 01/23/03 (0)
• This may be a dumb questions... - Derek 10:18:28 01/22/03 (2)
  • New - old stock - Peter Florance 10:20:43 01/22/03 (1)
    • Re: New - old stock - pumpkin 23:24:12 01/25/03 (0)
• Labour Estimate- Radiator - chris 09:48:19 01/22/03 (4)
  • Re: Labour Estimate- Radiator - Frank H 15:45:56 01/22/03 (1)
    • Don't let 'em scare you. I had AC and NO , , , - Jefflee 23:12:02 01/22/03 (0)
  • Re: Labour Estimate- Radiator - Jeff C 10:32:01 01/22/03 (1)
    • Took me a week, but had lots of interruptions. - Jefflee 10:50:36 01/22/03 (0)
• headrest - Lee Cornett 22:45:04 01/21/03 (4)
  • Re: headrest - Chris Hollis, Huntsville, AL 09:47:50 01/22/03 (0)
  • Re: headrest - Peter Florance 05:53:04 01/22/03 (0)
  • Re: headrest - Remy Davison 23:21:53 01/21/03 (1)
    • Re: headrest - Lee Cornett 13:34:23 01/22/03 (0)
• Test Message 2 - Troy Rudolph (Webmaster) 22:41:07 01/21/03 (0)
• Test Message - Troy Rudolph (Webmaster) 22:38:17 01/21/03 (0)
• I don't see the E12 on the list???????? - Tulsa Dave 21:42:14 01/21/03 (0)
• My S. O. is in Charleston S. C. (OT) - Tulsa Dave 21:33:14 01/21/03 (6)
  • Barbecue? - Troy Rudolph 12:00:20 01/22/03 (1)
    • She brought some of that stuff back... - Tulsa Dave 12:04:00 01/22/03 (0)
  • Re: My S. O. is in Charleston S. C. (OT) - Peter Florance 06:03:14 01/22/03 (1)
    • Re: My S. O. is in Charleston S. C. (OT) - Chris Hollis, Huntsville, AL 09:46:18 01/22/03 (0)
  • There's a great Pic-n-Pull in , , , , , - Jefflee 22:30:54 01/21/03 (1)
    • Tools are her stock and trade... - Tulsa Dave 07:01:42 01/22/03 (0)
• Window Fuses/Switches - Dan Lafley 18:58:08 01/21/03 (4)
  • Front and back emergency cutoff (nt) - ChuckNC 19:11:56 01/21/03 (3)
    • Re: Front and back emergency cutoff (nt) - well which one is which? 01:40:45 01/22/03 (2)
      • ummm - ChuckNC 05:51:44 01/22/03 (1)
        • Re: ummm - Matt C 13:23:38 01/22/03 (0)
• well .. the day is finally here -- after spending - brian - aka 'luvs' from mye28 and roadfly 16:07:25 01/21/03 (0)
• '80 528i for sale - dale 16:05:12 01/21/03 (3)
  • What Kind of Transmission? - John in Simi Valley 02:17:31 01/22/03 (1)
    • 5speed, pics link - dale 18:25:04 01/22/03 (0)
  • Re: '80 528i for sale - dale 16:06:24 01/21/03 (0)
• other BMW drivers (longish) - ChuckNC 15:38:37 01/21/03 (1)
  • Re: other BMW drivers (longish) - Remy Davison 23:11:08 01/21/03 (0)
• Wish me luck - Chris Hollis, Huntsville, AL 15:35:22 01/21/03 (2)
  • Re: Wish me luck - Lee Cornett 22:49:28 01/21/03 (0)
  • Two Words: - ChuckNC 15:43:45 01/21/03 (0)
• Heater Valve - Dave 11:41:08 01/21/03 (4)
  • Can be done in One Day --- No More/No Less - Jefflee 15:13:42 01/21/03 (0)
  • Silicone Grease - Jeff C 13:46:59 01/21/03 (2)
    • Re: Silicone Grease - Chris Hollis, Huntsville, AL 15:29:56 01/21/03 (1)
      • Re: Heater wont shut off - Cristian in Sydney - Oz 18:38:03 01/21/03 (0)
• 81 733i as Donor car? - karl sisson 10:21:56 01/21/03 (2)
  • Most mechanical except diff - Mike W. 00:01:52 01/22/03 (0)
  • Not much... - Lars Bend Or 14:27:49 01/21/03 (0)
• Anyone tried this keyless entry system? - Remy Davison 09:24:37 01/21/03 (7)
  • No but... - Don Daynes 11:01:28 01/21/03 (6)
    • You've mentioned this before... - Tulsa Dave 12:56:21 01/21/03 (5)
      • go get him, Dave! - Peter Florance 13:47:37 01/21/03 (4)
        • Is that a Wood or Metal Shaper - jeff 19:28:45 01/21/03 (0)
        • Re: go get him, Dave! - Don Daynes 16:14:27 01/21/03 (2)
          • Don maintains his shape - Peter Florance 06:05:42 01/22/03 (0)
          • Nothing as detailed as CAD drawings... - Tulsa Dave 18:58:43 01/21/03 (0)
• Manual to elec sunroof. - Al from Oz 05:34:00 01/21/03 (3)
  • ACHTUNG! need help here Guy's - Al from Oz 17:00:05 01/21/03 (2)
    • Re: ACHTUNG! need help here Guy's - Kristopher Barrett 14:59:25 01/22/03 (1)
      • Thanks Kris, thats very helpful. - Al from Oz 15:58:54 01/22/03 (0)
• Baccaro Point Nova Scotia singles - Margaret 00:16:09 01/21/03 (5)
  • And I had a BSA that was a single. - Al from Oz 04:44:44 01/21/03 (2)
    • Re: And I had a BSA that was a single. - karl sisson 09:35:03 01/21/03 (1)
      • I have a bad ankle to this day. - Al from Oz 15:40:17 01/21/03 (0)
  • complaint sent (nt) - spam slammer 04:17:18 01/21/03 (0)
  • Re: I one had a 2002 named Margaret....... NT - Blair 01:43:57 01/21/03 (0)
• Stall problem - Brian in Abilene 22:49:39 01/20/03 (2)
  • Re: Stall problem - Don Daynes 01:51:58 01/21/03 (1)
    • Car is manual - Brian in Abilene 08:16:03 01/21/03 (0)
• Test Message - Troy Rudolph (Webmaster) 22:04:59 01/20/03 (0)
• ToolTips on Posting Page - Troy Rudolph (Webmaster) 21:43:02 01/20/03 (2)
  • very cool! How about.. - Peter Florance - First Fives Dictator for Life 04:22:37 01/21/03 (1)
    • Re: very cool! How about.. - Troy Rudolph 08:12:41 01/21/03 (0)
• How to make my chrome nice and....SHINY - Andrew 19:44:40 01/20/03 (7)
  • Armor-all _does_ work for dashes, try NuFinish for - Remy Davison 08:27:17 01/21/03 (1)
    • Re: Armor-all _does_ work for dashes, try NuFinish for - Al from Oz 15:52:53 01/21/03 (0)
  • sorry if this comes up twice... - ChuckNC 21:02:24 01/20/03 (0)
  • Re: How to make my chrome nice and....SHINY - Al from Oz 20:58:00 01/20/03 (2)
    • Armor-all - Robert Bondi 21:33:49 01/20/03 (1)
      • Re: Armor-all - Al from Oz 23:37:12 01/20/03 (0)
  • Re: How to make my chrome nice and....SHINY - greghill-phx,az 19:59:56 01/20/03 (0)
• Convertable 530i ????? - GTA 14:27:51 01/20/03 (3)
  • Re: Convertable 530i ????? - Nick, CO 04:16:49 01/21/03 (0)
  • Re: Convertable 530i ????? - greghill-phx,az 19:56:20 01/20/03 (0)
  • FYI: Sierra beige 530i for sale $900 in classified - collins 16:22:33 01/20/03 (0)
• Virus sent with "Fives bulletin board" subject lin - Matt C 13:14:18 01/20/03 (12)
  • Did you get rid of it? I can help... - Tom In MO 07:25:18 01/21/03 (0)
  • KLEZ - Troy Rudolph (Webmaster) 13:41:49 01/20/03 (10)
    • Techical Q. - Jeff C 15:40:48 01/20/03 (9)
      • Re: Techical Q. - Troy Rudolph 16:05:26 01/20/03 (8)
        • Re: Techical Q. - Matt C 16:20:24 01/20/03 (7)
          • Associated w/ Site Participant - Troy Rudolph 17:27:53 01/20/03 (6)
            • I thought I said "PC Convert" - Jeff C 19:14:23 01/20/03 (5)
              • Ooops - Troy Rudolph 21:07:57 01/20/03 (3)
                • Re: Ooops - Frank H 10:20:29 01/21/03 (0)
                • Brakes again? - Peter Florance 21:32:43 01/20/03 (1)
                  • Re: Brakes again? Peter? - Jeff C 12:36:23 01/21/03 (0)
              • Re: I thought I said "PC Convert" - Frank H 20:06:01 01/20/03 (0)
• Archived! - Troy Rudolph 12:42:10 01/20/03 (0)