Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XXXII

(2003/09/14 - 2003/11/01)

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• Tire Width - Juan J. Hernandez 16:41:51 11/01/03 (1)
  • Re: Tire Width - Blair 19:41:02 11/01/03 (0)
• Another charging system update - Brian in Abilene 09:36:59 11/01/03 (6)
  • I vote regulator - Mike W. 13:40:29 11/01/03 (5)
    • I changed the reg about a year ago... - Brian in Abilene 13:46:56 11/01/03 (4)
      • Given the quality of many replacement parts...>>> - Lars Olbimmerguy 13:51:15 11/01/03 (3)
        • OK, I figured it was OK since I bought from BavAut - Brian in Abilene 13:53:28 11/01/03 (2)
          • I wasn't being critical of your comments, but the> - Lars...Olbimmerguy 18:48:44 11/01/03 (1)
            • No problem, Lars. I didn't take offense. (more) - Brian in Abilene 19:16:27 11/01/03 (0)
• OT (Almost)Personal update.Loooong. - Al from Oz 04:16:55 11/01/03 (5)
  • When you get the chance - Jeff C 18:49:48 11/01/03 (0)
  • Re: OT (Almost)Personal update.Loooong. - the rev. brendan X 16:39:12 11/01/03 (0)
  • Re: OT (Almost)Personal update.Loooong. - Chris Hollis, Huntsville AL 16:39:03 11/01/03 (0)
  • Re: OT (Almost)Personal update.Loooong. - matthewp 15:12:25 11/01/03 (0)
  • Sounds good, considering everything - Mike W. 13:03:37 11/01/03 (0)
• Braided Ground Straps - Brian in Abilene 14:02:52 10/31/03 (2)
  • negative battery cable includes braided strap - Peter Florance 14:28:17 10/31/03 (1)
    • Thanks! (nt) - Brian in Abilene 14:34:31 10/31/03 (0)
• Paging Peter Florence - Lou in Denver 10:09:04 10/31/03 (3)
  • 530i cold start valve diagram - Peter Florance 19:47:02 10/31/03 (0)
  • Re: Paging Peter Florence - Peter Florance 11:11:01 10/31/03 (0)
  • sorry, Florance (nt) - Lou in Denver 10:10:36 10/31/03 (0)
• anybody want a euro 6, nice 628csi on Fleabay - Adam Wilson in Chicago 08:00:49 10/31/03 (3)
  • There's a good 'Euro' 628CSI near me for $800! - Jeff Olson 08:45:11 10/31/03 (2)
    • How about a 'Euro' 528i in Charlotte, NC?, more... - Jeff Olson 08:50:24 10/31/03 (1)
      • Dang It! - ChuckNC 09:44:42 10/31/03 (0)
• brake upgrade early E12 >76 (long) - Zolka 02:56:24 10/31/03 (0)
• WTB: E12 rear trunk spoiler - jerry kingman 23:36:06 10/30/03 (11)
  • 6 hours to go! - Nick in Denver 09:33:50 10/31/03 (10)
    • Re: 6 hours to go! - Lee Cornett 12:52:11 10/31/03 (2)
      • was it still worth it with that shipping cost? - Adam Wilson in Chicago 13:21:34 10/31/03 (1)
        • Re: was it still worth it with that shipping cost? - Lee or Kathy Cornett 11:42:44 11/01/03 (0)
    • I don't think those are M535i items - Adam Wilson in Chicago 11:09:43 10/31/03 (4)
      • *shrug* you'd know better than I would. - Nick in Denver 12:34:15 10/31/03 (3)
        • and here's the //M535i one (pic) - Adam Wilson in Chicago 13:19:44 10/31/03 (0)
        • here's a BBS front spoiler (pic) - Adam Wilson in Chicago 13:18:17 10/31/03 (1)
          • Re: here's a BBS front spoiler (pic) - Lee Cornett 11:24:01 11/01/03 (0)
    • alpina springs and bilsteins? - ...tom 10:00:46 10/31/03 (1)
      • Re: alpina springs and bilsteins? - Alan A - Northern Calif 10:55:16 10/31/03 (0)
• Stumbling when accelerating..????? - Nathan 22:41:12 10/30/03 (3)
  • Fuel - Mike W. 23:02:36 10/31/03 (2)
    • Re: Fuel - Nathan 09:39:35 11/01/03 (1)
      • Fuel and timing - Mike W. 13:19:42 11/01/03 (0)
• Update on charging problem - Brian in Abilene 19:35:55 10/30/03 (3)
  • test light - Peter Florance 19:58:05 10/30/03 (2)
    • I'll get a test light tomorrow. (more) - Brian in Abilene 20:18:57 10/30/03 (1)
      • Re: I'll get a test light tomorrow. (more) - Peter Florance 22:40:20 10/30/03 (0)
• OT...just watched the northern lights..in Ga!!! - Ryan Bryan 19:22:05 10/30/03 (0)
• E12 for parts in NH - Matt C 17:32:13 10/30/03 (0)
• Peter -- Blowing Fuse #14 up-date (Long) - Jeff (Atl) 15:40:36 10/30/03 (7)
  • diagram - Peter Florance 09:40:56 10/31/03 (3)
    • Re: diagram - Peter Florance 09:41:45 10/31/03 (2)
      • arrg! - Peter Florance 09:42:47 10/31/03 (1)
        • Re: arrg! Good Stuff. Was out of town today , , - Jeff (Atl) 17:47:35 10/31/03 (0)
  • block connector - Peter Florance 22:51:37 10/30/03 (0)
  • Re: Peter -- Blowing Fuse #14 up-date (Long) - Peter Florance 19:54:47 10/30/03 (1)
    • Green wire I spoke of is the one w/brown stripe - Jeff (Atl) 20:16:02 10/30/03 (0)
• Blue cloth manual front seats for sale from e28 - Brent in NVA 15:00:57 10/30/03 (0)
• Drive shaft (New) on the Bay - Bob in San Jose 14:37:17 10/30/03 (4)
  • be careful - Peter Florance 22:53:44 10/30/03 (1)
    • Re: be careful - T.Hanson 12:48:54 10/31/03 (0)
  • Re: Drive shaft (New) on the Bay - Bob in San Jose 20:17:19 10/30/03 (1)
    • Story - Troy Rudolph 13:58:15 10/31/03 (0)
• 528i sometimes runs rough... - Bill Hynes 11:20:50 10/30/03 (7)
  • Could be moisture inside the distributor cap - Lars Olbimmerguy 11:48:37 10/30/03 (6)
    • Spark plug cables - Mike W. 20:37:46 10/30/03 (5)
      • Re: Spark plug cables - Bill Hynes 10:28:08 10/31/03 (2)
        • Re: Spark plug cables - Don Daynes 13:16:31 10/31/03 (1)
          • Re: Spark plug cables - Bill Hynes 13:49:21 10/31/03 (0)
      • Plug Wires - Don Daynes 08:58:39 10/31/03 (1)
        • Re: Plug Wires - Canada Karl 09:18:15 10/31/03 (0)
• Parts and more parts available - BavarianRescue 09:33:05 10/30/03 (3)
  • Here is his stuff - billy in SLO 17:28:44 10/30/03 (0)
  • List o' stuff - John in Simi valley 15:02:04 10/30/03 (0)
  • url please? (nt) - Adam Wilson in Chicago 10:04:26 10/30/03 (0)
• Cold Start - Lou in Denver 08:35:38 10/30/03 (3)
  • Check the fuel pressure - Mike W. 20:43:52 10/30/03 (0)
  • Re: Cold Start - Peter Florance 09:37:21 10/30/03 (1)
    • H2O FI Sensor - Wietse 18:26:35 10/30/03 (0)
• 7 series rotors - Joel 08:11:34 10/30/03 (3)
  • Re: 7 series rotors - Joel 20:22:55 10/30/03 (1)
    • Change Your Brake Fluid - Troy Rudolph 09:04:56 10/31/03 (0)
  • Re: 7 series rotors - Troy Rudolph 08:32:26 10/30/03 (0)
• AC compressor question. - kav from aus 04:35:10 10/30/03 (0)
• I have lost all in bush fire - Al from Oz 00:27:02 10/30/03 (38)
  • Speechless.. bad to hear.. NT - Aaron From Aus 05:44:01 10/31/03 (0)
  • Sorry to hear about your news, - Mike W. 23:36:33 10/30/03 (0)
  • Re: I have lost all in bush fire - Blair 18:45:23 10/30/03 (0)
  • Very sorry to hear that, Al - Remy Davison 18:21:51 10/30/03 (0)
  • My condolences to you and your family - Cristian in Sydney 18:01:03 10/30/03 (0)
  • Re: I have lost all in bush fire - Eric Q 16:05:42 10/30/03 (0)
  • Terrible - Luke 12:45:04 10/30/03 (0)
  • Re: I have lost all in bush fire - Jim 12:44:52 10/30/03 (0)
  • Glad you're okay - Jim Davis 11:55:20 10/30/03 (0)
  • Re: I have lost all in bush fire - Jake Hall 11:49:58 10/30/03 (0)
  • I'm speechless... - Tulsa Dave 11:06:44 10/30/03 (0)
  • Sorry for your losses - glad your family is OK. - Jeff (Atl) 10:58:33 10/30/03 (0)
  • Re: I have lost all in bush fire - John in England 10:57:22 10/30/03 (0)
  • Re: I have lost all in bush fire - Greg J 10:20:17 10/30/03 (0)
  • was this the story, Al? - Adam Wilson in Chicago 10:18:19 10/30/03 (1)
    • didn't work, here it is again - Adam Wilson in Chicago 10:18:54 10/30/03 (0)
  • link to article - billy in SLO 10:08:56 10/30/03 (1)
    • Yep, this seems to be the correct article - Adam Wilson in Chicago 10:20:55 10/30/03 (0)
  • Re: I have lost all in bush fire - billy in SLO, CA 09:46:24 10/30/03 (0)
  • Just tuned in... Sorry to hear about your loss. - Lars Olbimmerguy 09:44:35 10/30/03 (0)
  • May you be blessed and keep strong... - Jason 09:40:12 10/30/03 (0)
  • oh Al.... - Peter Florance 09:34:52 10/30/03 (0)
  • Terrible news - Don Daynes 09:22:12 10/30/03 (0)
  • Sorry about the loss - Lou in Denver 08:41:46 10/30/03 (0)
  • Re: I have lost all in bush fire - Troy Rudolph 08:27:41 10/30/03 (0)
  • Re: I have lost all in bush fire - Joel 08:07:10 10/30/03 (0)
  • Re: I have lost all in bush fire - Brian in Abilene 07:47:19 10/30/03 (0)
  • So sorry to hear the terrible news..... - Eddie in TO 07:46:04 10/30/03 (0)
  • Re: I have lost all in bush fire - Matt B 07:14:42 10/30/03 (0)
  • Re: I have lost all in bush fire - Chris Hollis 07:14:38 10/30/03 (0)
  • Sorry to hear the news - Mike K 06:57:42 10/30/03 (0)
  • Re: I have lost all in bush fire - Adam Wilson in Chicago 06:45:35 10/30/03 (0)
  • Re: I have lost all in bush fire - matthewp 06:19:06 10/30/03 (0)
  • Re: I have lost all in bush fire - Lee Cornett 05:27:02 10/30/03 (0)
  • wow man so sorry to hear that. in this life we> - chrystobal65 04:42:15 10/30/03 (0)
  • Our thoughts are with u and your family mate...... - kav from aus 04:36:32 10/30/03 (0)
  • Re: I have lost all in bush fire - John in Simi Valley 01:25:22 10/30/03 (0)
  • Re: I have lost all in bush fire - Tom Masters 00:34:29 10/30/03 (0)
• 4 piston calipers - Erick 00:18:42 10/30/03 (1)
  • you already have them - Peter Florance 06:03:16 10/30/03 (0)
• heater hose outlet - DanLafley 15:48:48 10/29/03 (2)
  • Flushing the heater core - Mike W. 20:49:13 10/29/03 (0)
  • Re: heater hose outlet - Blair 17:40:16 10/29/03 (0)
• Replaceing balljoint/control arms - J-Fro 13:25:32 10/29/03 (2)
  • Not Too Difficult - Troy Rudolph 13:44:15 10/29/03 (1)
    • Thanks Troy - J-Fro 11:47:41 10/30/03 (0)
• anyone know this car? - billy in SLO, CA 12:36:56 10/29/03 (13)
  • You looking for a daily driver or another project? - John in Simi Valley 21:17:55 10/29/03 (1)
    • Re: You looking for a daily driver or another project? - billy in SLO 09:55:28 10/30/03 (0)
  • Re: anyone know this car? - Eric Q 15:01:49 10/29/03 (10)
    • Re: anyone know this car? - Steve Marburger 20:42:41 10/29/03 (0)
    • I'm confused - billy in SLO, CA 16:12:58 10/29/03 (8)
      • VINs - Troy Rudolph 21:21:32 10/29/03 (0)
      • Re: I'm confused - Eric Q 16:53:56 10/29/03 (1)
        • Addendum - Eric Q 16:57:08 10/29/03 (0)
      • ETK says it a U.S. model - Bob in San Jose 16:36:03 10/29/03 (4)
        • Thanks Bob, I agree, how is "the one I let get - billy in SLO, CA 17:05:49 10/29/03 (3)
          • It's in the process of gettin new - Bob in San Jose 17:23:04 10/29/03 (2)
            • Re: It's in the process of gettin new - Will Ollison 20:57:48 10/29/03 (1)
              • Re: It's in the process of gettin new - Bob in San Jose 22:51:02 10/29/03 (0)
• Shrick camshaft 292 or 305 any leads? - Steve Eggen 11:12:35 10/29/03 (1)
  • Sorry for the duplicate! My mistake. - steve eggen 11:14:56 10/29/03 (0)
• Never too old to learn a new trick.. backbleed! - Lars Olbimmerguy 09:44:19 10/29/03 (0)
• MY BMW - MATT 07:49:45 10/29/03 (6)
  • he is in England, trace his isp(nt) - billy in SLO, CA 16:09:15 10/29/03 (0)
  • Re: MY BMW - Chris Hollis, Huntsville, AL 09:45:17 10/29/03 (0)
  • Where is it and how much? Send me photos! - Jeff Olson 09:22:22 10/29/03 (0)
  • Re: MY BMW - ChuckNC 08:07:07 10/29/03 (2)
    • agreed with Chuck, and more - Adam Wilson in Chicago 09:15:04 10/29/03 (1)
      • I beleive he said - billy in SLO 10:44:55 10/29/03 (0)
• '78 530i FS "Time Warp" - Tom Masters 02:23:53 10/29/03 (12)
  • Did you see the EGR stuff, scary! (nt) - Sold my 530i 14:30:56 10/29/03 (0)
  • Re: '78 530i FS "Time Warp" - Bob in San Jose 13:07:18 10/29/03 (2)
    • Re: '78 530i FS "Time Warp" - Eric Q 14:50:19 10/29/03 (1)
      • yeah, they're trippin'. but 9,600 miles, geez. nm - chrystobal65 04:50:45 10/30/03 (0)
  • this car was in the classifieds..... - Greg 09:22:09 10/29/03 (0)
  • Wow, absolutely gorgeous, what do you guys think? - Adam Wilson in Chicago 05:51:28 10/29/03 (5)
    • Re: Wow, absolutely gorgeous, what do you guys think? - Jim 19:04:28 10/29/03 (0)
    • Re: Wow, absolutely gorgeous, what do you guys think? - Eric Q 14:52:57 10/29/03 (0)
    • Re: Wow, absolutely gorgeous, what do you guys think? - Greg J 08:06:41 10/29/03 (0)
    • Re: Wow, absolutely gorgeous, what do you guys thi - T.Hanson 07:16:16 10/29/03 (0)
    • Re: Wow, absolutely gorgeous, what do you guys think? - Mark 05:59:41 10/29/03 (0)
  • the vents below the radio have dust in them> - chrystobal65 03:54:38 10/29/03 (0)
• e34 M5 engine into e12? - Jim Davis 22:39:49 10/28/03 (8)
  • dood, you can fit it into a 1600/2002. April 1993> - chrystobal65 03:44:16 10/29/03 (0)
  • I just done it! - Zolka 01:50:52 10/29/03 (4)
    • holy crap, this guy isn't kidding - Adam Wilson in Chicago 06:04:42 10/29/03 (1)
      • well.....8-) - Zolka 07:32:08 10/29/03 (0)
    • i love you man :) - chrystobal65 03:48:21 10/29/03 (1)
      • Me too 8-) - Zolka 04:05:11 10/29/03 (0)
  • Re: e34 M5 engine into e12? - Don Daynes 23:18:05 10/28/03 (0)
  • Do It!!! - Troy Rudolph 22:58:32 10/28/03 (0)
• Bilstein HDs and Suspension Techniques Qs - trubey 22:19:08 10/28/03 (7)
  • Can and has been done many times - billy in SLO 14:04:06 10/29/03 (3)
    • Re: Can and has been done many times - Bob/E12/6er 14:55:11 10/29/03 (2)
      • I know what you mean, my 2002 had "cut" springs - billy in SLO 17:45:34 10/29/03 (1)
        • Thanks Billy! - Bob/E12/6er 18:29:17 10/29/03 (0)
  • If I read your message correctly . . . - Bob/E12/6er 10:55:16 10/29/03 (1)
    • And... - Eric Q 14:55:57 10/29/03 (0)
  • Re: Bilstein HDs and Suspension Techniques Qs - Blair 23:29:41 10/28/03 (0)
• FOR SALE - 1980 E12 528i - Matt Clarke 20:21:20 10/28/03 (0)
• Charging system help please (longish) - Brian in Abilene 19:48:50 10/28/03 (4)
  • Re: Charging system help please (longish) - Mike W. 23:10:38 10/28/03 (0)
  • I don't know why you hate electrical stuff - Peter Florance 21:57:40 10/28/03 (1)
    • It's probably self-inflicted. (more) - Brian in Abilene 08:35:52 10/29/03 (0)
  • Re: Charging system help please (longish) - Bob in San Jose 20:56:51 10/28/03 (0)
• Shrick camshaft 292 or 305 - Steve Eggen 18:53:07 10/28/03 (0)
• Blowing Heater Motor Fuses , , , , , , , - Jeff (Atl) 16:17:42 10/28/03 (6)
  • Motor Tested -- good motor - still blowing fuses , - Jeff (Atl) 17:09:48 10/29/03 (3)
    • Re: Motor Tested -- good motor - still blowing fuses , - Peter Florance 21:21:21 10/29/03 (1)
      • Thanks Peter -- will work on tomorrow , , , , , - Jeff (Atl) 22:07:06 10/29/03 (0)
    • Must add that I was in the cluster to , , , - Jeff (Atl) 18:00:27 10/29/03 (0)
  • Re: Blowing Heater Motor Fuses , , , , , , , - Walt Barie 07:18:38 10/29/03 (0)
  • Re: Blowing Heater Motor Fuses , , , , , , , - Peter Florance 17:24:26 10/28/03 (0)
• OT: the front end i wish BMW was using now>> - chrystobal65 15:52:06 10/28/03 (2)
  • I rented one in Germany- loved it - Greg J 15:59:19 10/28/03 (1)
    • check out this RUF 911 video @ the 'Ring> - chrystobal65 19:21:43 10/28/03 (0)
• First E12 road trip - Brian in Abilene 14:08:08 10/28/03 (7)
  • look up Tulsa Dave when you're there - Adam Wilson in Chicago 15:03:34 10/28/03 (0)
  • Re: First E12 road trip - ChuckNC 14:21:57 10/28/03 (5)
    • Excellent list... - Tulsa Dave 16:17:09 10/28/03 (4)
      • Thanks for the list Chuck and Dave. - Brian in Abilene 19:50:42 10/28/03 (3)
        • That always depends on who is buying ;^) (nt) - Tulsa Dave 20:33:16 10/28/03 (2)
          • I wanna come too !! nt - Jeff (Atl) 21:58:49 10/28/03 (0)
          • Me of course! :) (nt) - Brian in Abilene 20:47:44 10/28/03 (0)
• Jerry Kingman - e12 seats - Bob in San Jose 12:21:00 10/28/03 (0)
• What does vinegar do to paint? Semi-emergency, ple - Mike K 12:08:10 10/28/03 (3)
  • Thanks for the quick replies (m) - Mike K 14:05:28 10/28/03 (0)
  • drop a line to Chuck Bennett - Greg J 13:15:57 10/28/03 (0)
  • Re: What does vinegar do to paint? Semi-emergency, ple - T.Han 12:51:06 10/28/03 (0)
• Oil Filter relocation, oil cooler, temp sender - Peter Mooney 10:32:52 10/28/03 (1)
  • Re: Oil Filter relocation, oil cooler, temp sender - ChuckNC 12:51:32 10/28/03 (0)
• Dash bulb #/size needed - Brian in Abilene 08:02:01 10/28/03 (2)
  • Re: Dash bulb #/size needed - Tom Masters 13:30:22 10/28/03 (1)
    • You've got mail...(nt) - Brian in Abilene 14:05:21 10/28/03 (0)
• owners manual - Joel 07:15:39 10/28/03 (3)
  • Re: owners manual - Joel 06:21:02 10/29/03 (0)
  • Re: owners manual - I have an extra - Brian in Calgary 21:21:52 10/28/03 (0)
  • What year car? - Randy 76/530 08:42:43 10/28/03 (0)
• Glovebox repair - Joel 06:40:31 10/28/03 (0)
• Anyone selling a 535i in Australia? - kav from aus 02:44:15 10/28/03 (4)
  • I am selling a 535i in Australia - Cristian in Sydney - Oz 23:24:03 10/28/03 (0)
  • Re: Anyone selling a 535i in Australia? - Al from Oz 04:28:02 10/28/03 (2)
    • do you know of any? - kav 05:03:06 10/28/03 (1)
      • Nope! - Al from Oz 05:31:03 10/28/03 (0)
• Replacing Seatbelts - Tarazona 19:35:17 10/27/03 (7)
  • Look to other BMW Models for instance.... - Peter Mooney 11:35:57 10/28/03 (0)
  • Re: Replacing Seatbelts - Jeff C 06:34:38 10/28/03 (0)
  • Re: Replacing Seatbelts - Frank H 20:54:39 10/27/03 (0)
  • Re: Seatbelts - Need some help also - Alan A - Northern Calif 20:46:02 10/27/03 (3)
    • Re: Seatbelts - Need some help also - Don Daynes 23:37:26 10/27/03 (0)
    • Re: Seatbelts - Need some help also - Al from Oz 20:59:49 10/27/03 (1)
      • Re: Need some help also - Thanks Guys! (nt) - Alan A - Northern Calif 10:25:47 10/29/03 (0)
• redmist from classifieds...i have your pistons! - jason griffith 18:23:50 10/27/03 (2)
  • Re: redmist from classifieds...i have your pistons! - Peter Mooney 11:39:35 10/28/03 (0)
  • Peter Mooney? - Troy Rudolph 21:05:40 10/27/03 (0)
• more 4hp22 questions - billy in SLO 15:13:27 10/27/03 (3)
  • ZF-4-HP-22 - John in Simi Valley 20:54:30 10/27/03 (2)
    • Re: ZF-4-HP-22 - billy in SLO 10:04:07 10/28/03 (1)
      • safe now - John in Simi Valley 17:05:11 10/28/03 (0)
• Seats - Bob in San Jose 13:49:52 10/27/03 (5)
  • Re: Seats - jerry kingman 15:26:00 10/27/03 (0)
  • 7series seats too big. The floor pan in the - Lars Olbimmerguy 14:22:20 10/27/03 (3)
    • Are there other model seats that "bolt-in" >>>> - Leonard Love 11:40:04 10/28/03 (2)
      • I think the 78 car has the hump on the pass - Lars Olbimmerguy 12:18:23 10/28/03 (1)
        • Lars, thanks....I think you are correct about >>> - Leonard Love 14:58:55 10/28/03 (0)
• The Heater! - Dan Lafley 13:06:24 10/27/03 (7)
  • Re: The Heater! - T.Hanson 18:28:26 10/27/03 (0)
  • Re: The Heater! - Troy Rudolph 13:37:36 10/27/03 (5)
    • Re: The Heater! - Canada Karl 18:19:25 10/27/03 (4)
      • Re: The Heater! - Dan Lafley 20:08:16 10/27/03 (3)
        • Re: The Heater! - T.Hanson 22:00:41 10/27/03 (2)
          • Re: The Heater! - Canada 11:07:32 10/28/03 (1)
            • Re: The Heater! - T.Han 07:24:16 10/30/03 (0)
• 4HP22 questions - billy in SLO 11:45:15 10/27/03 (7)
  • 4HP22 answers - Mike W. 12:00:23 10/27/03 (6)
    • I am aware of the clutch pack and this one has - billy in SLO, CA 12:08:42 10/27/03 (5)
      • Re: I am aware of the clutch pack and this one has - Mike W. 12:21:59 10/27/03 (4)
        • Re: I am aware of the clutch pack and this one has - rick 13:56:57 10/27/03 (3)
          • What I want to know is... - Remy Davison 22:18:57 10/27/03 (1)
            • Re: What I want to know is... - rick 23:27:03 10/28/03 (0)
          • 2 fast, 2 furious nt - Jeff (Atl) 15:18:24 10/27/03 (0)
• K&N cold air intake system... - Bill Hynes 10:43:53 10/27/03 (2)
  • Re: K&N cold air intake system... - Russell 07:59:28 10/28/03 (0)
  • Re: K&N cold air intake system... - Blair 11:19:03 10/27/03 (0)
• HELP! I need a part ASAP! - rick 09:15:59 10/27/03 (12)
  • ICM - John in Simi Valley 23:36:14 10/27/03 (10)
    • Re: ICM - rick 14:31:29 10/28/03 (9)
      • Pick Your Poison - John in Simi Valley 21:11:36 10/28/03 (8)
        • Re: Pick Your Poison - rick 20:42:46 10/29/03 (0)
        • Re: Pick Your Poison - rick 23:48:43 10/28/03 (6)
          • I had this problem as well. (more) - Brian in Abilene 13:19:29 10/29/03 (5)
            • Re: I had this problem as well. (more) - rick 20:32:56 10/29/03 (4)
              • The 530i, if it's not electronic ignition used the - Brian in Abilene 21:10:29 10/29/03 (1)
                • Re: The 530i, if it's not electronic ignition used the - rick 21:59:11 10/29/03 (0)
              • Diagnostics et al. - John in Simi Valley 21:04:11 10/29/03 (1)
                • Re: Diagnostics et al. - rick 21:56:59 10/29/03 (0)
  • Re: HELP! I need a part ASAP! - T.Han 09:57:35 10/27/03 (0)
• E12 Gathering Report - Pics - Don Daynes 23:50:49 10/26/03 (6)
  • Bring Back P.H. ?? - John in Simi 19:56:33 10/27/03 (0)
  • What color is the reddish one? - Greg J 10:15:18 10/27/03 (2)
    • Re: What color is the reddish one? - Don Daynes 20:20:28 10/27/03 (1)
      • I thought that might be it - Greg J 12:32:17 10/28/03 (0)
  • Re: E12 Gathering Report - Pics - Eric Q 02:12:44 10/27/03 (1)
    • still waiting for child support - Jeff F 00:32:03 10/28/03 (0)
• e28 or e23? - newguy 23:50:22 10/26/03 (10)
  • Have BMWs; 528i, (x535i), 528e, 633CSi - John in (very smoky) Simi Valley 20:26:24 10/27/03 (1)
    • They are all safe... - Eric Q 01:06:45 10/28/03 (0)
  • E23 YES! - Eric Q 16:17:35 10/27/03 (0)
  • E28 or E34 535i DEFINITELY! Sixer maybe? E23 NO! - Jeff Olson 14:09:47 10/27/03 (0)
  • E34? - Troy Rudolph 13:35:29 10/27/03 (0)
  • I've got both - Mike W. 12:08:56 10/27/03 (0)
  • Re: e28 or e23? - Alan in NC 10:21:54 10/27/03 (0)
  • Have had both.... - Lars Olbimmerguy 09:43:07 10/27/03 (0)
  • depends on what you want - ChuckNC 07:13:18 10/27/03 (0)
  • you mean '85 528e??? anyway, try roadfly.org for> - chrystobal65 02:39:20 10/27/03 (0)
• Wake up World, My baby is here! - Al from Oz 22:23:08 10/26/03 (2)
  • congrats. pics soon??? - chrystobal65 02:36:41 10/27/03 (0)
  • Re: Wake up World, My baby is here! - Bob in San Jose 22:54:55 10/26/03 (0)
• A 1st5s.org OT record! Any of you guys diabetic? - trubey 21:33:31 10/26/03 (0)
• Five Fest in Dec 03 Bimmer magazine - Robert Bondi 19:59:17 10/26/03 (3)
  • The "everday" enthusiast??? - Eric Q 02:11:55 10/27/03 (1)
    • Re: The "everday" enthusiast??? - T.Hanson 22:07:21 10/27/03 (0)
  • not k-jet - Robert Bondi 20:46:35 10/26/03 (0)
• need leather seats in Aus - kav 4rm aus 18:38:08 10/26/03 (3)
  • Re: need leather seats in Aus - Joel 20:47:37 10/26/03 (2)
    • im considering selling my seats in melbourne...but - Aaron From Aus 07:41:55 10/27/03 (0)
    • Thanks mate....n/t - kav 23:42:33 10/26/03 (0)
• Parting out '81 528i - BavarianRescue 16:35:08 10/26/03 (1)
  • Re: Parting out '81 528i - Bob in San Jose 21:55:02 10/26/03 (0)
• Ignitor - Jon Laicovsky 09:37:50 10/26/03 (1)
  • Re: Ignitor - DMV `77 630CSI 18:25:07 10/26/03 (0)
• Hey Adam, I tried joining your M535i site and got - BNC 22:57:31 10/25/03 (5)
  • I don't have a pending membership request - Adam Wilson in Chicago 06:07:28 10/26/03 (2)
    • BTW.....Here's a pic of my lowly E28 M535i, LOL! - BNC 17:33:38 10/26/03 (0)
    • I'll try again and Thanks Adam! - BNC 17:30:05 10/26/03 (0)
  • Re: Hey Adam, I tried joining your M535i site and got - Lee Cornett 23:06:35 10/25/03 (1)
    • Thanks Lee!! I will help all that I can... - BNC 17:29:16 10/26/03 (0)
• the E 12's place in BMW's history: - chrystobal65 19:43:27 10/25/03 (3)
  • Re: the E 12's place in BMW's history: - Jim 09:32:09 10/26/03 (0)
  • Re: the E 12's place in BMW's history: - Timmer 08:37:42 10/26/03 (0)
  • The 2002 never quite did it for me BUT... - Jeff Olson 22:07:35 10/25/03 (0)
• Hey Jeff - Chris Hollis 18:09:58 10/25/03 (3)
  • Cannot resist... Different Definition of Insanity. - Lars Olbimmerguy.... 19:41:41 10/25/03 (2)
    • INSANITY... - Jeff Olson 22:16:15 10/25/03 (1)
      • Re: INSANITY... - Chris Holllis 07:39:03 10/26/03 (0)
• 1980 528i in Calgary - Update - Boardheadbri 17:50:07 10/25/03 (0)
• Mystery Noise.....Poltergeist??? - Canada Karl 17:18:29 10/25/03 (0)
• anyone need any tan interior parts - ...tom 14:49:21 10/25/03 (5)
  • What year? - Dan Lafley 18:15:49 10/25/03 (1)
    • 1980-81 (eom) - ...tom 18:25:37 10/25/03 (0)
  • I could - Peter Florance 17:57:55 10/25/03 (2)
    • let me know soooooon! (more) - ...tom 18:28:26 10/25/03 (1)
      • hmmm - Peter Florance 19:52:30 10/25/03 (0)
• Good Sixer needs a new home! '83 633CSI FS! - Jeff Olson 14:07:42 10/25/03 (0)
• E-mail from Alpina about the 'Euro' 528i, more... - Jeff Olson 13:59:39 10/25/03 (1)
  • wow, that's too bad, but very interesting info - Adam Wilson in Chicago 20:43:56 10/25/03 (0)
• anyone thinking of a 3.5 conversion should see... - ChuckNC 12:31:24 10/25/03 (9)
  • Re: anyone thinking of a 3.5 conversion should see... - T.Hanson 13:01:35 10/25/03 (8)
    • Solution.. $390 per month - Lars Olbimmerguy 14:31:13 10/25/03 (6)
      • Re: Solution.. $390 per month - T.Hanson 21:57:04 10/25/03 (5)
        • Well... straight lines answered one at a time - Lars Olbimmerguy 02:06:38 10/26/03 (4)
          • Free Labor from Atlanta -- the Homeless - Elliot Murphy 12:19:24 10/27/03 (0)
          • Non Traditional Revenue - ChuckNC 07:35:26 10/27/03 (0)
          • Sorry. No electric bill over $30/mo so far>> - Lars 02:08:09 10/26/03 (1)
            • According to dogpile.com - trubey 21:51:04 10/26/03 (0)
    • Get your priorities right! - Mike W. 13:10:41 10/25/03 (0)
• Megasquirt report requested... Please? - Lars Olbimmerguy 12:07:01 10/25/03 (3)
  • Re: Megasquirt report requested... Please? - Peter Florance 18:02:16 10/25/03 (2)
    • Re: Megasquirt report requested... Please? - Lou in Denver 10:59:57 10/28/03 (0)
    • Thanks Peter, If the guy who is talking to me>>> - Lars Olbimmerguy 19:39:28 10/25/03 (0)
• Hey Jeff Olson........ - Chris Hollis, Huntsville, AL 11:38:32 10/25/03 (5)
  • Still working out the pick-up details, more... - Jeff Olson 13:40:07 10/25/03 (4)
    • Hey Jeff........... - Chris Hollis 17:07:19 10/25/03 (3)
      • I talked to the owner today, more... - Jeff Olson 17:22:31 10/25/03 (2)
        • Re: I talked to the owner today, more... - T.Hanson 22:07:05 10/25/03 (1)
          • I believe switch to Motronic was '82, more... - Jeff Olson 09:16:48 10/26/03 (0)
• Hey j prothero... - Bill Hynes 11:02:10 10/25/03 (0)
• Missing my E12 - Bob N. 10:10:27 10/25/03 (1)
  • Re: Missing my E12 - rick 09:23:33 10/27/03 (0)
• time switch question... - kav 4rm Aus 08:09:47 10/25/03 (1)
  • thermo time switch operation - Peter Florance 19:55:39 10/25/03 (0)
• Two Questions... - Bill Hynes 22:01:03 10/24/03 (4)
  • On the seat - Mike W. 00:17:08 10/25/03 (2)
    • Super clear vinyl sealant - Mike W. 17:27:51 10/25/03 (1)
      • Thanks for the input - Bill Hynes 09:34:41 10/30/03 (0)
  • Re: Two Questions... - T.Han 22:35:50 10/24/03 (0)
• posting pictures - Russell 18:03:07 10/24/03 (1)
  • Re: posting pictures - ChuckNC 18:43:50 10/24/03 (0)
• FS: Calgary - ChuckNC 16:41:47 10/24/03 (4)
  • Re: FS: Calgary - Boardheadbri 18:15:26 10/24/03 (3)
    • 3:00 tomorrow - Boardheadbri 20:36:39 10/24/03 (0)
    • Re: FS: Calgary - Bob Iverach 19:21:47 10/24/03 (0)
    • Cool! - ChuckNC 18:30:56 10/24/03 (0)
• Trouble getting 528i to fire - Damon 16:15:26 10/24/03 (4)
  • Re: Trouble getting 528i to fire - Pete S. 21:23:43 10/31/03 (0)
  • Low tech - Mike W. 00:21:06 10/25/03 (0)
  • Re: Trouble getting 528i to fire - Peter Florance 22:10:03 10/24/03 (1)
    • Re: Trouble getting 528i to fire - Damon 17:19:59 10/26/03 (0)
• Interior Dye - Dan lafley 14:57:52 10/24/03 (2)
  • I used RIT - ChuckNC 15:03:28 10/24/03 (0)
  • Sometimes shoe repair shops have it. Call around. - J-Fro 15:03:03 10/24/03 (0)
• E12 purchase - Martin 10:49:59 10/24/03 (7)
  • Re: E12 purchase - ChuckNC 15:08:43 10/24/03 (0)
  • Re: E12 purchase - T.Han 13:43:23 10/24/03 (0)
  • I guess it depends on the condition of the >>> - Leonard Love 11:46:15 10/24/03 (4)
    • trying the link again >> - Leonard Love 11:50:32 10/24/03 (3)
      • Which Air Dam is That? - Troy Rudolph 12:38:44 10/24/03 (2)
        • Zender (eom) - Leonard Love 12:49:52 10/24/03 (1)
          • doesn't look like that now though because my >> - Leonard Love 12:54:30 10/24/03 (0)
• '79 528i catalytic converter fits '81? - Christian, East Bay 10:17:38 10/24/03 (8)
  • Re: '79 528i catalytic converter fits '81? - Troy Rudolph 12:41:59 10/24/03 (7)
    • I don't think so - Mike W. 20:51:51 10/24/03 (4)
      • Nearly Certain - Troy Rudolph 21:33:57 10/24/03 (3)
        • I could be wrong, but - Mike W. 23:07:21 10/24/03 (2)
          • '81 528i donor car - Troy Rudolph 23:56:15 10/24/03 (1)
            • OK, learn something new every day! (NT) - Mike W. 00:23:19 10/25/03 (0)
    • Re: '79 528i catalytic converter fits '81? - Christian 12:46:28 10/24/03 (0)
    • Check this link. - Troy Rudolph 12:46:22 10/24/03 (0)
• heads up, ebay '77 530i in CT, automatic - Adam Wilson in Chicago 08:46:06 10/24/03 (1)
  • I bid up to my limit but the reserve is not met! - TCD 09:03:44 10/24/03 (0)
• Neiman Markus 645's gone in a flash - Tom Masters 02:11:01 10/24/03 (2)
  • mark my words.... most where sold to brokers who - Frank H 10:00:04 10/24/03 (0)
  • ahh, the pulling power of needless markup! :) nm - chrystobal65 05:01:13 10/24/03 (0)
• Paging Bob in San Jose - Tito 01:06:38 10/24/03 (0)
• Bob in San Jose - Got some new wheels - Boardheadbri 23:11:14 10/23/03 (0)
• Pre pump...... - kav from aus 22:44:42 10/23/03 (4)
  • no you don't have one - Peter Florance 05:36:56 10/24/03 (0)
  • Re: Pre pump...... - Mike W. 23:08:09 10/23/03 (2)
    • Re: Pre pump...... - Lenny D. 23:21:01 10/23/03 (1)
      • Re: Pre pump......what models/yrs had one? NT - Blair 00:42:42 10/24/03 (0)
• z1 is amazing (OT) - James in Aust 21:55:41 10/23/03 (1)
  • OEM = Original Equipment Manufacturer - Troy Rudolph 22:09:04 10/23/03 (0)
• So Cal E12 Extravaganza....new info - Don Daynes 21:49:54 10/23/03 (1)
  • 9:AM Pacific STANDARD time? - John in Simi Valley 12:56:15 10/25/03 (0)
• FYI FS: Bavaria in IA - ChuckNC 16:22:59 10/23/03 (0)
• looking for euro bumpers - Antoine 15:07:12 10/23/03 (0)
• Wheel Offsets (ET) on our cars?? - Jeff (Atl) 10:25:57 10/23/03 (6)
  • More Info Needed (IMHO) - Troy Rudolph (Webmaster) 13:20:16 10/23/03 (4)
    • Died a sudden death , , , , , , , , , - Jeff (Atl) 22:30:25 10/24/03 (0)
    • And whether car is lowered ?? - Jeff (Atl) 22:12:41 10/23/03 (0)
    • check w/shawn d on the mye28.com board - billy in SLO 18:00:46 10/23/03 (1)
      • Beg to Differ - Troy Rudolph 21:33:05 10/23/03 (0)
  • ET 11 on front, ET 24 on rear, 16 inch BBS - Jeff (Atl) 10:27:20 10/23/03 (0)
• Help Help! - Joel 05:16:57 10/23/03 (2)
  • guibo or center bearing (more) - ...tom 06:22:43 10/23/03 (1)
    • Re: guibo or center bearing (more) - Joel 00:56:06 10/24/03 (0)
• Guys looking for new shoes for the whip... SO Cal - trubey 23:43:17 10/22/03 (3)
  • concur w/lars but... - billy in SLO 11:39:30 10/23/03 (0)
  • Doan think so..... If they fit E30 they may have - Lars OBG 00:25:54 10/23/03 (1)
    • 8 series should fit too! (nt) - Matt B 10:54:31 10/26/03 (0)
• fuel pump questions - stewart 21:21:56 10/22/03 (1)
  • Re: fuel pump questions - Christian, East Bay 14:14:54 10/23/03 (0)
• Condensed Bumper and Air Dam? - Dan lafley 19:47:09 10/22/03 (2)
  • Take a look one post below for pic! - Bob/E12/6er 13:12:22 10/23/03 (0)
  • Re: Condensed Bumper and Air Dam? - Steve Marburger 22:01:03 10/22/03 (0)
• So Cal E12 Conference....more - Don Daynes 15:17:46 10/22/03 (0)
• First Fives Grill Badge - Bill Hynes 13:38:18 10/22/03 (11)
  • Re: First Fives Grill Badge - Bernie 22:37:53 10/22/03 (1)
    • did you mean to respond to the grille badge post? - Adam Wilson in Chicago 08:18:37 10/23/03 (0)
  • Buy one here... - j prothero 14:41:39 10/22/03 (4)
    • Still for sale? - Bill Hynes 11:55:17 10/23/03 (0)
    • can i have my spare back sometime too? ;>) - ...tom 15:40:30 10/22/03 (2)
      • NO WAY!! I ordered you a nw one, tom... - j prothero 16:15:53 10/22/03 (1)
        • naaaa, one of the new lot is fine, no rush - ...tom 18:32:07 10/22/03 (0)
  • ummm..... hate to say it but where ya been? - Adam Wilson in Chicago 14:09:00 10/22/03 (3)
    • What about me Adam??? - Derek 09:18:14 10/24/03 (0)
    • Re: ummm..... hate to say it but where ya been? - Bill Hynes 16:01:54 10/22/03 (0)
    • grille badge ordering message board post - Adam Wilson in Chicago 14:17:05 10/22/03 (0)
• Exhaust?? - ET57 23:36:44 10/21/03 (1)
  • No!!! - Mike W. 00:22:06 10/22/03 (0)
• Posting pictures and finding miniature E12's - Russell Moat 21:14:40 10/21/03 (4)
  • Re: Posting pictures and finding miniature E12's - Peter Florance 06:11:35 10/22/03 (0)
  • Russell, didn't you buy that silver one? - Adam Wilson in Chicago 22:22:42 10/21/03 (1)
    • Re: Driver broke down not the car - Russell 07:14:23 10/22/03 (0)
  • Re: Posting pictures and finding miniature E12's - Alan A - Northern Calif 22:08:00 10/21/03 (0)
• brake squeal gone - Karl in KS 19:27:12 10/21/03 (5)
  • Be careful... - Mike W. 21:17:38 10/21/03 (4)
    • Re: Be careful... - Remy Davison 22:55:02 10/21/03 (3)
      • ridges? - Peter Florance 06:21:56 10/22/03 (2)
        • Brakes - Matt d uk 13:30:33 10/24/03 (1)
          • Re: Brakes - Peter Florance 19:57:56 10/25/03 (0)
• Combo Relay - SwampJedi 18:07:01 10/21/03 (3)
  • Re: Combo Relay - Peter Florance 19:30:53 10/21/03 (2)
    • Re: Combo Relay - SwampJedi 21:20:51 10/21/03 (1)
      • bad prepump? - Peter Florance 06:19:03 10/22/03 (0)
• BBS MAHLEs on e-bay (look nice) - Alan A - Northern Calif 16:33:38 10/21/03 (0)
• centre console and glove compartment questions - Harm Grooten 16:15:40 10/21/03 (5)
  • Thanks guys! (nm) - Harm Grooten 11:16:09 10/22/03 (0)
  • Re: centre console and glove compartment questions - Bob in San Jose 02:51:26 10/22/03 (0)
  • third answer - Karl in KS 19:14:37 10/21/03 (0)
  • Re: centre console and glove compartment questions - kav 17:52:11 10/21/03 (0)
  • Plug on the left... - Bill Hynes 17:20:06 10/21/03 (0)
• E12 M535s For Sale UK - David 15:42:37 10/21/03 (3)
  • Re: E12 M535s For Sale UK - Al from Oz 16:52:33 10/21/03 (2)
    • Re: E12 M535s For Sale UK - David 12:26:53 10/22/03 (1)
      • Thank you David. - Al from Oz 17:07:20 10/22/03 (0)
• One can dream right? - Nick in Denver 15:15:53 10/21/03 (1)
  • very cool, wonder why it's missing the stripes? - Adam Wilson in Chicago 16:00:22 10/21/03 (0)
• Wiper Motor - T-Raz 15:10:34 10/21/03 (1)
  • I think I've got one - Mike W. 21:20:39 10/21/03 (0)
• So Cal E12 gathering....more - Don Daynes 11:17:54 10/21/03 (5)
  • I will be there and I am square - Jeff F 00:30:23 10/22/03 (0)
  • Re: So Cal E12 gathering....more - Kaveman 20:51:36 10/21/03 (0)
  • Hey...those darn curves again..... - Eddie in TO 12:08:50 10/21/03 (2)
    • Re: Hey...those darn curves again..... - Don Daynes 12:46:23 10/21/03 (1)
      • Re: Hey...those darn curves again..... - Eddie ni TO 13:41:38 10/21/03 (0)
• What's the deal with VIN # & insurance companies - Alan in NC 07:48:07 10/21/03 (7)
  • Re: What's the deal with VIN # & insurance companies - Frank H 10:20:50 10/21/03 (0)
  • A pencil tracing at VIN acceptable at DMV, more... - Jeff Olson 08:47:48 10/21/03 (0)
  • 14 digits required in '81 - Troy Rudolph 08:33:34 10/21/03 (0)
  • Changes in VIN around 1981 I believe. - Lars Olbimmerguy 08:13:26 10/21/03 (3)
    • Re: Changes in VIN around 1981 I believe. - Alan in NC 09:11:54 10/21/03 (2)
      • Actually, done within the parameters of Ebay - Lars OBG 11:04:02 10/21/03 (1)
        • Re: Actually, done within the parameters of Ebay - Alan in NC 11:40:42 10/21/03 (0)
• firs country drive - front end not right - gary dorn in Oz 04:07:26 10/21/03 (1)
  • Re: firs country drive - front end not right - Troy Rudolph 09:46:52 10/21/03 (0)
• Instrument Cluster - Tom Masters 03:06:30 10/21/03 (4)
  • Re: Instrument Cluster - I have an extra one - Brian 21:07:51 10/22/03 (0)
  • Re: Instrument Cluster - Bob in San Jose 20:02:51 10/21/03 (1)
    • Bob, you've got mail x2 (nt) - Tom Masters 23:04:35 10/21/03 (0)
  • Re: Instrument Cluster - Jeff C 10:19:13 10/21/03 (0)
• slow windshield wipers - Robert Bondi 23:08:26 10/20/03 (5)
  • Similar Problem: Replaced WW Motor - Misha 12:11:39 10/21/03 (0)
  • Re: slow windshield wipers - Peter Florance 05:21:50 10/21/03 (0)
  • Style of mechanism holding the wiper shafts?? - Lars Olbimmerguy 23:27:20 10/20/03 (2)
    • Re: Style of mechanism holding the wiper shafts?? - Robert Bondi 23:50:24 10/20/03 (1)
      • Sounds like you have the all steel one, and yes - Lars 00:11:38 10/21/03 (0)
• Update on Surging Idle - Brian in Abilene 19:49:29 10/20/03 (1)
  • Surging idle solved - Brian in Abilene 08:02:11 10/21/03 (0)
• Jumping MPH needle - Bill Hynes 18:05:05 10/20/03 (5)
  • fairly common - Robert Bondi 22:47:28 10/20/03 (3)
    • Re: fairly common - Bill Hynes 09:47:01 10/21/03 (2)
      • Re: fairly common - Robert Bondi 03:09:06 10/22/03 (1)
        • Thanks a lot - Bill Hynes 07:34:39 10/22/03 (0)
  • worn cables - Nick 18:40:47 10/20/03 (0)
• 'New' M535i has arrived - Al from Oz 17:21:33 10/20/03 (4)
  • Re: 'New' M535i has arrived - Jim Race 00:23:30 10/21/03 (0)
  • Re: 'New' M535i has arrived - Tom Masters 17:57:24 10/20/03 (2)
    • There's a Mother in Law joke in there somewhere.nt - Al from Oz 22:00:39 10/20/03 (1)
      • Do you mean "back seat air bags"? nt - Jeff (Atl) 22:37:30 10/20/03 (0)
• Good Old Gas in the morning - Dan Lafley 16:50:08 10/20/03 (1)
  • Likely a leaky injector, line or cold-start valve - Misha 17:53:54 10/20/03 (0)
• BMW 745i - Peter Mooney 15:31:03 10/20/03 (9)
  • Try Team745i - David 16:07:49 10/20/03 (7)
    • Re: Try Team745i - TCD 16:44:23 10/20/03 (6)
      • I know what you mean ... - Troy Rudolph 21:44:32 10/20/03 (5)
        • LOL, you are exactly correct! - TCD 07:36:24 10/21/03 (0)
        • Just as>>>>>> - Lars Olbimmerguy 22:55:54 10/20/03 (3)
          • I'm glad I know nothing...(nt) - Eric Q 15:35:40 10/21/03 (0)
          • So how did you get to be a member ... - Troy Rudolph 09:38:08 10/21/03 (1)
            • Sadly, I am cast out, as I was not able to - Lars.... 11:08:03 10/21/03 (0)
  • Re: BMW 745i - Troy Rudolph 15:48:31 10/20/03 (0)
• Clutch Pedal Gone - Dave nYc 13:35:18 10/20/03 (3)
  • Clutch Slave Cylinder - Troy Rudolph 15:50:13 10/20/03 (0)
  • Re: Clutch Pedal Gone - Peachee from SF 13:50:30 10/20/03 (0)
  • clutch slave or master cylinder leaking - Nick 13:44:35 10/20/03 (0)
• WE EXPORT JAPANESE USED CARS - office OI 12:30:02 10/20/03 (0)
• OT: triple side-draft, 3.5l, E3 Bavaria on ebay - Adam Wilson in Chicago 08:31:59 10/20/03 (8)
  • Very nice.. and interesting treatment>>> - Lars Olbimmerguy 10:24:41 10/20/03 (0)
  • I saw this car... - ChuckNC 09:28:54 10/20/03 (6)
    • This car was at the Fest in Boone, wasn't it? (nt) - Eric Q 15:36:48 10/21/03 (1)
      • Re: This car was at the Fest in Boone, wasn't it? (nt) - Jake Hall 18:21:03 10/21/03 (0)
    • How can a 1-year old paint job have rust bubbles? - Misha 18:40:56 10/20/03 (3)
      • Re: How can a 1-year old paint job have rust bubbles? - Jake Hall 07:23:25 10/21/03 (0)
      • Re: How can a 1-year old paint job have rust bubbles? - T.Han 21:44:26 10/20/03 (1)
        • Agree with the "Rust Never Rests" Mantra - Misha 12:01:56 10/21/03 (0)
• trip was successful, would you do this? - ...tom 08:05:19 10/20/03 (3)
  • absolutely! - stewart 12:39:27 10/20/03 (0)
  • Semi-OT: Looking for mechanic near Ventura, CA - Brian in Abilene 08:12:18 10/20/03 (1)
    • Sorry, didn't mean to post as a reply....(nt) - Brian in ABilene 08:15:15 10/20/03 (0)
• "New" E12 Project car - Matt Clarke 00:52:30 10/20/03 (2)
  • Re: "New" E12 Project car - Jeff C 22:04:44 10/20/03 (0)
  • Re: "New" E12 Project car - Jim 18:43:42 10/20/03 (0)
• So Cal E12 Get Together....more - Don Daynes 23:56:42 10/19/03 (3)
  • Re: So Cal E12 Get Together....more - Jim 18:48:36 10/20/03 (0)
  • Here's a semi-complete M5. - doninportland 14:45:16 10/20/03 (0)
  • Re: So Cal E12 Get Together....more - ChuckNC 10:10:44 10/20/03 (0)
• ramdom link - 2002sue 20:44:18 10/19/03 (1)
  • Re: ramdom link - Zolka 05:37:55 10/20/03 (0)
• rear squat - peter mooney 17:40:41 10/19/03 (7)
  • Re: rear squat - billy in SLO 13:50:44 10/20/03 (0)
  • No Jumping? - īZolka 05:32:11 10/20/03 (1)
    • Wheel Hop / Axle Tramp / Etc - Troy Rudolph 11:21:17 10/20/03 (0)
  • Get Bilstein HDs if you don't have them already - Eric Q 00:28:03 10/20/03 (0)
  • Re: rear squat - Troy Rudolph 22:20:35 10/19/03 (0)
  • I like the squat - Peter Florance 17:59:41 10/19/03 (1)
    • Re: I like the squat - Peter Mooney 15:25:17 10/20/03 (0)
• Fuel system flush for E-12 - Richard Risling 16:22:30 10/19/03 (2)
  • Re: Fuel system flush for E-12 - donniej 13:26:59 10/20/03 (0)
  • Re: Fuel system flush for E-12 - Jeff (Atl) 17:55:02 10/19/03 (0)
• Guibo R&R tip - Peter Mooney 15:48:58 10/19/03 (0)
• Chris Hollis, 528i in AL, more... - Jeff Olson 11:30:56 10/19/03 (6)
  • good luck! - ChuckNC 10:14:58 10/20/03 (0)
  • Re: Chris Hollis, 528i in AL, more... - Chris Hollis, Huntsville 12:23:54 10/19/03 (4)
    • Re: Chris Hollis, 528i in AL, more... - Peter Mooney 15:52:23 10/19/03 (3)
      • Nope - Chris Hollis 17:33:26 10/19/03 (2)
        • I e-mailed the VIN to Alpina (Germany), more... - Jeff Olson 20:35:32 10/19/03 (1)
          • Re: I e-mailed the VIN to Alpina (Germany), more... - Chris Hollis 21:28:18 10/19/03 (0)
• Pisces ? - T.Han 08:50:00 10/19/03 (1)
  • Yea !! Night before last. Weird. All night. - Jeff (Atl) 10:42:30 10/19/03 (0)
• Brake Pad squeel, myth or reality? - Chris S. 06:05:14 10/19/03 (12)
  • Reality, short answer - Don Daynes 10:03:12 10/20/03 (0)
  • Hot or Cold? - Matt B 09:17:44 10/20/03 (0)
  • What works for me - Mike W. 23:07:01 10/19/03 (0)
  • All brakes squeal... - karl in KS 21:49:15 10/19/03 (0)
  • What I tried just today.... - doninportland 20:35:29 10/19/03 (0)
  • Re: Brake Pad squeel, myth or reality? - Peter Florance 07:47:23 10/19/03 (6)
    • What is the theory behind brake-pad squeal? - Jeff (Atl) 12:51:25 10/19/03 (5)
      • in terms you'd relate to: - Peter Florance 18:02:05 10/19/03 (4)
        • (OT) Open reel tape machines? - Mike W. 23:11:17 10/19/03 (3)
          • what I do for a living - Peter Florance 05:51:24 10/20/03 (2)
            • Nope, just 1/4 inch - Mike W. 00:53:36 10/21/03 (0)
            • we still use one every now and again - ChuckNC 10:18:05 10/20/03 (0)
• She's Dead, Jim! - Nick in Denver 01:28:15 10/19/03 (4)
  • Re: She's Dead, Jim! - Lou in Denver 10:59:23 10/20/03 (1)
    • Yeah! - Nick in Denver 20:29:44 10/20/03 (0)
  • 3.5L - Karl in KS 21:51:09 10/19/03 (0)
  • wow, that's a shame - Adam Wilson in Chicago 09:37:11 10/19/03 (0)
• What would happen... - Brian in Abilene 22:47:49 10/18/03 (5)
  • At idle - Karl in KS 22:01:55 10/19/03 (1)
    • WOT - Peter Florance 05:55:06 10/20/03 (0)
  • only one way to find out - Peter Florance 07:48:51 10/19/03 (2)
    • Peter, I pulled the idle switch connectors... - Brian in Abilene 11:34:50 10/19/03 (1)
      • that's what I figgered - Peter Florance 17:32:47 10/19/03 (0)
• Getrag 265/6 seals replaced - Peter Mooney 20:16:53 10/18/03 (3)
  • thanks - Karl in KS 22:06:18 10/19/03 (0)
  • Great job! - Peter Florance 20:43:15 10/18/03 (1)
    • Re: Great job! - Peter Mooney 15:42:02 10/19/03 (0)
• This for fan clutch repair.... - Lars Olbimmerguy 10:53:34 10/18/03 (1)
  • Re: This for fan clutch repair.... - Aaron From Aus 11:13:40 10/19/03 (0)
• Automatic Transmission Fluid - Remo Lucioli 09:49:04 10/18/03 (1)
  • Re: Automatic Transmission Fluid - Remy Davison 00:09:46 10/19/03 (0)
• Fuel pump seized? - ET57 21:59:34 10/17/03 (3)
  • possibly - Peter Florance 06:48:59 10/18/03 (0)
  • The fuel pump runs when - Mike W. 23:57:23 10/17/03 (1)
    • Re: The fuel pump runs when - ET57 00:18:46 10/18/03 (0)
• anyone between columbus oh and philly? - ...tom 15:38:27 10/17/03 (3)
  • I think Tom is "stock-piling" E-12s , , , nt - Elliot Murphy 19:58:13 10/17/03 (1)
    • If so, then swing by Oregon and PU 79 body. - Lars Olbimmerguy 12:18:56 10/18/03 (0)
  • You've got mail. - donniej 15:56:46 10/17/03 (0)
• WSJ full spread add has e12, e28 and etc. - collins 14:02:23 10/17/03 (0)
• fyi: '78 Alpina (