Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XXXIII

(2003/11/01 - 2003/12/31)

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• HAPPY NEW YEAR! No DUI, be nice to your car! nt - Tom Masters 11:58:38 12/31/03 (0)
• HAPPY NEW YEAR! No DUI, be nice to your car! nt - Tom Masters 11:58:24 12/31/03 (0)
• 2nd try to I.D. e12 in Los Osos - billy in SLO 11:50:47 12/31/03 (0)
• E12 springs all same for early 5s and 6s - Dave 03:05:31 12/31/03 (0)
• trim pieces - Dan Lafley 02:08:59 12/31/03 (3)
  • Re: trim pieces - Jeff (Atl) 08:10:36 12/31/03 (2)
    • Re: trim pieces - Lee Cornett 10:45:59 12/31/03 (0)
    • Plastic Clips... - Tulsa Dave 10:13:41 12/31/03 (0)
• Budget 5 speed alert (and more) - Mike W. 23:18:23 12/30/03 (0)
• Thanks to all your advise was right on the mark! - rick 22:44:50 12/30/03 (0)
• Tan Interior help - Lee Cornett 22:11:07 12/30/03 (0)
• 1st start in 8 months. Input? - trubey 20:32:22 12/30/03 (0)
• While watching TV over the holidays... - Randy 76/530 16:42:01 12/30/03 (6)
  • Ulrich's site has some movie/tv listings - ChuckNC 08:44:46 12/31/03 (0)
  • It was Octopussy - Remy Davison 07:37:21 12/31/03 (0)
  • Re: While watching TV over the holidays... - jerry kingman 00:43:32 12/31/03 (0)
  • Ah, yes .. wasn't that the movie where he was - Lars... 21:29:05 12/30/03 (0)
  • Re: While watching TV over the holidays... - Chris Hollis 17:12:33 12/30/03 (0)
  • I thot so too - stewart in slc 17:05:14 12/30/03 (0)
• Misc 4 speed questions - Matt C 15:47:52 12/30/03 (1)
  • Re: Misc 4 speed questions - Troy Rudolph 16:29:46 12/30/03 (0)
• who has the LS1-into-e12 project? - Blasphemy Patrol 13:21:40 12/30/03 (3)
  • 302 would be easier IMHO - Troy Rudolph 16:25:10 12/30/03 (1)
    • There is a Bronco pan (rear sump) for 302 - Lars Olbimmerguy 21:26:17 12/30/03 (0)
  • Peter Mooney - Troy Rudolph 16:18:08 12/30/03 (0)
• shameless plug.......... - newguyinoldfiver 11:06:23 12/30/03 (1)
  • Hope you sold it to an enthusiast - Remy Davison 07:44:21 12/31/03 (0)
• 1981 528i flasher - Al 02:46:51 12/30/03 (2)
  • Re: 1981 528i flasher - Joel 07:11:27 12/30/03 (1)
    • Re: 1981 528i flasher - Al 00:13:35 12/31/03 (0)
• Gets cold out and electric windows don't work - Steve 23:57:03 12/29/03 (3)
  • 20 yr old grease... - Brian in Calgary 00:28:32 12/30/03 (1)
    • Re: 20 yr old grease... 20 below LOL.....nt - Tom Masters 01:33:44 12/30/03 (0)
  • Re: Gets cold out and electric windows don't work - Tom Masters 00:15:34 12/30/03 (0)
• E12 Christmas present (picture) - Adam Wilson in Chicago 23:07:01 12/29/03 (10)
  • model source - Adam Wilson in Chicago 15:55:47 12/30/03 (5)
    • attn Troy, at times the submission doesn't take - Adam Wilson in Chicago 15:57:51 12/30/03 (4)
      • I've tested this a good bit and ... - Troy Rudolph 16:14:02 12/30/03 (3)
        • if I had to guess - Adam Wilson in Chicago 16:48:47 12/30/03 (2)
          • That's what the directions say! (eom) - Troy Rudolph (Webmaster) 19:07:13 12/30/03 (0)
          • yeah it's the http:// part - Peter Florance 17:22:50 12/30/03 (0)
  • Re: E12 miniture - russell 14:42:34 12/30/03 (0)
  • Re: E12 Christmas present (picture) - Kaveman 10:18:50 12/30/03 (0)
  • Hey, Wait ! That car's been lowered. - Jeff (Atl) 07:35:55 12/30/03 (0)
  • Re: E12 Christmas present , Sweet !!!! nt - Tom Masters 23:34:10 12/29/03 (0)
• headlight replacement - Steve 20:30:42 12/29/03 (1)
  • Re: headlight replacement - Preston in Spokane 00:30:24 12/30/03 (0)
• Preventive Maintenance - Lou in Denver 11:27:54 12/29/03 (5)
  • Filters... and more - Mike W. 00:20:38 12/31/03 (0)
  • If you haven't done it already... - Tulsa Dave 12:11:28 12/29/03 (3)
    • Belts, Hoses, Wires, Vacuum Lines ... - Troy Rudolph 15:24:41 12/29/03 (2)
      • More ... - Troy Rudolph 15:28:55 12/29/03 (1)
        • And Stainless Steel Brake Hoses (eom) - Troy Rudolph 22:42:46 12/29/03 (0)
• Weekend Notes - ChuckNC 11:23:36 12/29/03 (2)
  • Chuck shoot me an email - Sam Schultz 18:14:34 12/29/03 (0)
  • pictures - ChuckNC 11:26:14 12/29/03 (0)
• whos' e12 in Los Osos Sun? - billy in SLO 10:30:56 12/29/03 (0)
• I'm back - Peter Florance - First Fives Dictator for Life 05:49:25 12/29/03 (2)
  • I was wondering where you were - Mike W. 18:49:50 12/29/03 (0)
  • good........... - Chris Hollis, Huntsville 08:01:10 12/29/03 (0)
• new E12 owner in need of help! - JB in Canada 21:13:06 12/28/03 (4)
  • Window glass - Brian in Calgary 00:42:16 12/29/03 (3)
    • don't think so - stewart in slc 02:49:07 12/29/03 (2)
      • Yep, needs glass from 77 or older car. - Lars 03:16:54 12/29/03 (1)
        • Re: Yep, needs glass from 77 or older car. - rick 22:52:38 12/30/03 (0)
• M635csi in OZ - Tony 16:34:32 12/28/03 (2)
  • There were manual 635s in Oz - Remy Davison 06:28:51 12/29/03 (1)
    • Re: There were manual 635s in Oz - james 08:18:47 12/29/03 (0)
• Camshaft and idle issues - Daniel 16:20:38 12/28/03 (4)
  • when you say idle issues.. - Peter Florance 05:48:06 12/29/03 (0)
  • Cams - Mike W. 23:38:19 12/28/03 (0)
  • Use a dial indicator to measure cam lift. - Lars Olbimmer 22:32:15 12/28/03 (0)
  • I doubt its cam related,does it do better when hot - marc79euro635 19:17:13 12/28/03 (0)
• I GOT IT! New 5 Spd tranny! - Brian in Calgary 23:56:56 12/27/03 (11)
  • Did I mention how much this cost? - Brian in Calgary 19:35:21 12/29/03 (0)
  • Re: I GOT IT! New 5 Spd tranny! - Lee Cornett 02:36:54 12/29/03 (0)
  • See! Now just like the manuals say...>>>> - Lars Olbimmerguy 15:57:40 12/28/03 (0)
  • Congrats! See, we knew you could do it! nt - Mike W. 13:46:19 12/28/03 (0)
  • Good job Brian! (nt) - Velocewest 12:04:40 12/28/03 (0)
  • sorry about the pics... - Brian in Calgary 09:37:01 12/28/03 (1)
    • Refresh your link to the pics - Brian in Calgary 10:10:13 12/28/03 (0)
  • Congrats - Jeff C 07:59:45 12/28/03 (1)
    • Re: Congrats - Chris Hollis 08:48:54 12/28/03 (0)
  • Way to go Brian !! Good show but no pics. nt - Jeff (Atl) 01:22:48 12/28/03 (0)
  • Re: I GOT IT! New 5 Spd tranny! - Bob in San Jose 00:36:42 12/28/03 (0)
• ///m635i??? long - Joel 20:14:45 12/27/03 (8)
  • M635CSi? - Troy Rudolph 22:31:21 12/27/03 (1)
    • Re: M635CSi? - Dave 14:36:33 12/30/03 (0)
  • Don't think so.... At least not with the three > - Lars Olbimmerguy 22:07:50 12/27/03 (2)
    • Re: Don't think so.... At least not with the three > - Joel 22:11:20 12/27/03 (1)
      • Well, it's certainly possible.... there were quite - Lars 22:36:26 12/27/03 (0)
  • Re: ///m635i??? long - newguyinoldfiver 21:52:36 12/27/03 (2)
    • Re: ///m635i??? long - Joel 22:05:04 12/27/03 (1)
      • No M6/M635s in Oz - Remy Davison 07:11:50 12/28/03 (0)
• For those in Australia/NZ....Car ID in 1981 - Lars Olbimmerguy 12:45:37 12/27/03 (0)
• Cracked head 75 530i - need source for replacement - Frank 08:07:32 12/27/03 (4)
  • Re: Cracked head 75 530i - need source for replacement - Tom Masters 03:51:11 12/28/03 (0)
  • Got a couple of options you can consider - Craig Day 02:21:28 12/28/03 (0)
  • You might want to try these guys - I think I read - Mark 84/533i Houston 10:22:30 12/27/03 (0)
  • Re: Cracked head 75 530i - need source for replacement - newguyinoldfiver 10:19:46 12/27/03 (0)
• Evil Brakes - Joel 07:05:22 12/27/03 (3)
  • Re: Evil Brakes - Bill In Michigan 20:59:19 12/28/03 (1)
    • Brakes are enough to total a MI beater - trubey 17:08:01 12/29/03 (0)
  • Re: Evil Brakes - Karl in KS 09:09:20 12/27/03 (0)
• Hi Ho, Hi Ho, it's off to work I go... - Brian in Calgary 01:06:14 12/27/03 (1)
  • Re: Hi Ho, Hi Ho, it's off to work I go... - Chris Hollis 07:35:56 12/27/03 (0)
• E12 Tan Interior pieces needed - Lee Cornett 19:02:09 12/26/03 (4)
  • Re: E12 Tan Interior pieces needed - Karl in KS 08:59:01 12/27/03 (3)
    • Re: E12 Tan Interior pieces needed - Lee Cornett 09:07:36 12/27/03 (2)
      • World Upholstery has... - trubey 17:16:52 12/29/03 (1)
        • Re: World Upholstery has... - Lee Cornett 22:10:54 12/29/03 (0)
• Feeler for a re-issue of the First Fives T-shirts - Eric Q 16:30:23 12/26/03 (36)
  • Link to Pictures of First Five T-shirt - Eric Q 00:39:40 12/30/03 (3)
    • OK, it works now... - Eric Q 14:06:41 12/30/03 (0)
    • Re: Link to Pictures of Your Car???? No T-Shirt... - Tom Masters 01:37:24 12/30/03 (1)
      • It was working last night - Eric Q 13:59:26 12/30/03 (0)
  • WOW, What a response!!! - Eric Q 14:24:39 12/29/03 (0)
  • Re: Feeler for a re-issue of the First Fives T-shirts - Richard 13:56:40 12/29/03 (0)
  • I'll take 2 Large please...(nt) - billy in SLO 10:07:24 12/29/03 (0)
  • One for me - Brad In Texas 08:42:15 12/29/03 (0)
  • Hey me too, I am in for 2 XL, long sleeves please! - BNC 07:43:44 12/29/03 (0)
  • For all those who don't know what they look like - Eric Q 23:55:45 12/28/03 (1)
    • Re: For all those who don't know what they look like - Phil in Poulsbo 00:33:36 12/29/03 (0)
  • Re: Feeler for a re-issue of the First Fives T-shirts - Preston in Spokane 21:43:15 12/28/03 (0)
  • Re: Feeler for a re-issue of the First Fives T-shirts - Tito 21:40:17 12/28/03 (0)
  • Re: Feeler for a re-issue of the First Fives T-shirts - Bill In Michigan 20:43:02 12/28/03 (0)
  • Re: Feeler for a re-issue of the First Fives T-shirts - tony 20:13:13 12/28/03 (1)
    • Should be able to...I'll research...(nt) - Eric Q 23:51:47 12/28/03 (0)
  • Re: Feeler for a re-issue of the First Fives T-shirts - John in Antioch 18:49:04 12/28/03 (2)
    • Two------XXL--are they going 2 be - John in Antioch 18:54:27 12/28/03 (1)
      • Yup...(nt) - Eric Q 23:50:30 12/28/03 (0)
  • I am in for two! - Greg J 12:58:47 12/28/03 (0)
  • Re: Feeler for a re-issue of the First Fives T-shirts - Tom Masters 03:49:34 12/28/03 (0)
  • Re: Feeler for a re-issue of the First Fives T-shirts - Kaveman 18:36:16 12/27/03 (0)
  • I'm in for two fat boy models... - Tulsa Dave 13:48:56 12/27/03 (0)
  • What do they look like? - Nick in Denver 23:52:03 12/26/03 (1)
    • Never seen one, but I found this in the archives.. - Tulsa Dave 19:35:17 12/28/03 (0)
  • Put me down for 2 XLs. Thanks. (eom) - Troy Rudolph 23:27:00 12/26/03 (0)
  • 2 for me (nt) - Brian in Calgary 22:22:17 12/26/03 (1)
    • Re: 2 for me (sorry both Large) eom - Brian in Calgary 23:42:33 12/26/03 (0)
  • Re: Feeler for a re-issue of the First Fives T-shirts - russell 21:36:10 12/26/03 (0)
  • Id be in for a couple nt - Matt C 19:53:32 12/26/03 (0)
  • Re: Feeler for a re-issue of the First Fives T-shirts - Lee Cornett 18:57:11 12/26/03 (0)
  • Re: Feeler for a re-issue of the First Fives T-shirts - Chris Hollis 18:36:48 12/26/03 (0)
  • T for two! - ChuckNC 16:56:45 12/26/03 (0)
  • I'd be up for two - Mike W. 16:48:26 12/26/03 (0)
  • Re: Feeler for a re-issue of the First Fives T-shirts - newguyinoldfiver 16:36:48 12/26/03 (1)
    • Re: Feeler for a re-issue of the First Fives T-shirts - Bob Humphrey 01:21:33 12/29/03 (0)
• front end stuff (long) - ChuckNC 21:46:38 12/25/03 (3)
  • hook a comealong to a tree & pull it out - marc79euro635 10:38:47 12/27/03 (0)
  • Re: front end stuff (long) - Sam Schultz 20:23:35 12/26/03 (0)
  • Re: front end stuff (long) - Karl in KS 09:30:25 12/26/03 (0)
• WOW! What an E12 Christmas! - Lee Cornett 12:48:59 12/25/03 (1)
  • if you know what's good for you, - ChuckNC 18:15:09 12/25/03 (0)
• Euro front turn signal lens.... - Canada Karl 12:07:11 12/25/03 (1)
  • Re: Euro front turn signal lens.... - newguyinoldfiver 13:45:29 12/25/03 (0)
• Pics of new E12 - Remy Davison 09:02:05 12/25/03 (3)
  • Re: Pics of new E12 - T.Han 23:52:14 12/26/03 (0)
  • wow..!! ubridled envy here.. - newguyinoldfiver 15:23:41 12/25/03 (0)
  • Re: Pics of new E12 - Jeff C 11:23:51 12/25/03 (0)
• Cold Start Valve Electricals - Medly 23:52:43 12/24/03 (4)
  • Re: Cold Start Valve Electricals - Troy Rudolph 19:11:38 12/26/03 (0)
  • Thermo time switch - Mike W. 22:51:03 12/25/03 (2)
    • Re: Thermo time switch - Karl in KS 09:34:04 12/26/03 (1)
      • got mine working - Karl in KS 09:03:50 12/27/03 (0)
• Early E12 Tail Light Assy on eBay. - Troy Rudolph 22:28:33 12/24/03 (0)
• Tranny removal advice please - Brian in Calgary 18:18:39 12/24/03 (8)
  • Re: Tranny removal advice please - T.Han 23:58:34 12/26/03 (0)
  • Re: Tranny removal advice please - Mike W. 22:42:55 12/25/03 (1)
    • One more thing - Mike W. 22:57:08 12/25/03 (0)
  • Having done this in a junk yard once..... - Bill Bowes 16:29:11 12/25/03 (0)
  • Re: Tranny removal advice please - Kaveman 10:18:38 12/25/03 (0)
  • Others can add to this list: ,,,,,,,,,,,,,,, - Jeff (Atl) 22:17:41 12/24/03 (1)
    • Re: Others can add to this list: ,,,,,,,,,,,,,,, - Ryan Bryan 08:07:46 12/25/03 (0)
  • Re: Tranny removal advice please - ...tom 19:57:53 12/24/03 (0)
• WTB front/rear bumper molding - Daniel 18:11:47 12/24/03 (1)
  • Re: WTB front/rear bumper molding - Jeff C 22:25:05 12/24/03 (0)
• To Lou -- Thks I got the part yesterday. (eom) - Jeff C 15:51:08 12/24/03 (0)
• Alternator 65 Amp vs. 55 Amp - Derek 12:38:54 12/24/03 (1)
  • Electrically, yes no problem - Mike W. 13:11:50 12/24/03 (0)
• Happy Holidays to ALL. I have received,,,, - Jeff (Atl) 10:35:48 12/24/03 (3)
  • You got gifts? All I got was this oily black rock - Tulsa Dave 12:18:21 12/24/03 (2)
    • Don't you mean, "an oily black BLOCK"? nt - Jeff (Atl) 16:38:16 12/24/03 (0)
    • Re: You got gifts? All I got was this oily black rock - Bob Iverach 13:46:06 12/24/03 (0)
• Brakes long - Joel 08:38:49 12/24/03 (1)
  • Re: Brakes long - ChuckNC 12:21:10 12/24/03 (0)
• Seat Covers - Tom Masters 01:27:33 12/24/03 (5)
  • Cheapo solution... - Tulsa Dave 14:22:55 12/24/03 (2)
    • Re: Cheapo solution... - Tom Masters 03:45:17 12/28/03 (0)
    • got the same - Karl in KS 09:37:22 12/26/03 (0)
  • Re: Seat Covers - Bob Iverach 13:59:38 12/24/03 (1)
    • Re: Seat Covers - I know that place - Brian in Calgary 16:12:54 12/24/03 (0)
• best price, Bilstein sport??? and.... - jerry kingman 00:52:42 12/24/03 (1)
  • Re: best price, Bilstein sport??? and.... - Bob Humphrey 02:01:57 12/24/03 (0)
• Paging Misha spring question answer - bigerik 23:27:01 12/23/03 (0)
• Parting 80 528i California Car - Phil in Poulsbo 22:34:38 12/23/03 (0)
• just totalled 745i Turbo - Joe'85_745i 19:24:33 12/23/03 (3)
  • Re: just totalled 745i Turbo - Bill Bowes 18:27:03 12/24/03 (0)
  • Perhaps this one? - Troy Rudolph 09:13:55 12/24/03 (0)
  • Maybe an E12? :-) NT - Blair 22:29:17 12/23/03 (0)
• Spark Plug Wires - Troy Rudolph 18:53:41 12/23/03 (2)
  • I carry the Kingsbourne wires and...... - Steve Haygood 08:17:35 12/24/03 (0)
  • kingsborne.com NOT kingsbourne.com (eom) - Troy Rudolph 19:07:30 12/23/03 (0)
• Valve of a S38 head and valvetrain? - Blair 18:27:04 12/23/03 (2)
  • Hope you're asking that question on both of>>> - Lars Olbimmerguy 21:11:14 12/23/03 (0)
  • 3 hrs to go.... - 3.5cs 20:26:29 12/23/03 (0)
• Air Vent - Karl in KS 18:10:55 12/23/03 (2)
  • Re: Air Vent - Bob in San Jose 15:51:09 12/24/03 (1)
    • Thanks - Karl in KS 14:24:41 12/25/03 (0)
• Happy Holiday's e12er's - Misha 16:47:19 12/23/03 (1)
  • Best wishes to you and yours - Karl in KS 18:06:33 12/23/03 (0)
• R&R camshaft seal - Allen 15:20:32 12/23/03 (5)
  • Re: R&R camshaft seal - Allen 07:02:54 12/24/03 (0)
  • Sounds motronic - Mike W. 00:08:09 12/24/03 (0)
  • Re: R&R camshaft seal - Matt C 21:35:10 12/23/03 (0)
  • cam shaft seal? - Peter Florance 16:30:07 12/23/03 (1)
    • Re: cam shaft seal? - Allen 16:57:42 12/23/03 (0)
• what size is the crank nut? 3?mm - R. Holly 09:37:50 12/23/03 (2)
  • 36mm nt - Peter Florance 10:16:44 12/23/03 (1)
    • Thanks, Peter. nt - R. Holly 16:53:14 12/23/03 (0)
• New Brake Master Cylinder Installed - Brian in Calgary 01:18:36 12/23/03 (0)
• Selling my beloved e12 in Brisbane Aus.... - kav 23:39:57 12/22/03 (0)
• Hope the Left(Mid) coaster e12er's Are OK!? - Kaveman 20:07:14 12/22/03 (2)
  • I'm back...in the basement! - billy in SLO 11:24:58 12/23/03 (1)
    • Re: I'm back...in the basement! - Gabba 05:02:47 12/24/03 (0)
• Grill Badge - Tom Masters 13:49:18 12/22/03 (15)
  • "Badges...we don't need no stinkin' badges...." - NC Doug 08:42:43 12/23/03 (9)
    • eeeeHHHHH!!! Wrong answer..... - Adam Wilson in Chicago 09:41:19 12/23/03 (8)
      • Happy Birthday Adam - Bob Humphrey 02:07:16 12/24/03 (0)
      • Re: eeeeHHHHH!!! Wrong answer..... - Canada Karl 19:15:43 12/23/03 (0)
      • Happy Birthday to you... - Ryan Bryan 12:45:41 12/23/03 (0)
      • That line has been in so many movies... - Tulsa Dave 11:11:38 12/23/03 (1)
        • OT, but try this site... - Tulsa Dave 11:48:04 12/23/03 (0)
      • HAPPY BIRTHDAY !!!!! nt - Tom Masters 10:43:43 12/23/03 (0)
      • HAPPY Birthday Adam! - Brian in Calgary 10:25:13 12/23/03 (0)
      • happy birthday badge-man - Peter Florance - First Fives Dictator for Life 10:18:20 12/23/03 (0)
  • Re: Grill Badge - Peter Florance 21:10:40 12/22/03 (4)
    • Re: Grill Badge - Kaveman 22:23:41 12/22/03 (1)
      • Re: Grill Badge - Ryan Bryan 09:08:47 12/23/03 (0)
    • Re: Grill Badge - Eric 21:27:50 12/22/03 (1)
      • why the home page of course - Peter Florance - First Fives Dictator for Life 21:42:33 12/22/03 (0)
• Engine Rebuild Questions - Jim Davis 13:05:31 12/22/03 (1)
  • Re: Engine Rebuild Questions - Mike W. 17:37:35 12/22/03 (0)
• Passing on an email for a Virginia Rally (long) - Jeff C 10:05:45 12/22/03 (0)
• Paging Brian in Calgary - Derek 09:57:37 12/22/03 (1)
  • Re: Paging Brian in Calgary - Brian in Calgary 11:48:55 12/22/03 (0)
• Hey Chris Hollis! - Alexa Berenbak of Decatur 08:28:40 12/22/03 (3)
  • What was wrong with it? - Jeff Olson 06:47:59 12/23/03 (2)
    • Re: What was wrong with it? - Alexa 18:33:26 12/23/03 (0)
    • Re: What was wrong with it? - Alexa 18:24:56 12/23/03 (0)
• paging Christian Gorton (Aust.) re side skirts - ckn 20:17:57 12/21/03 (1)
  • re: side skirts are OM Zender - Cristian in Sydney - Oz 14:33:23 12/22/03 (0)
• Hey Jeff Olson - Chris Hollis, Huntsville 18:04:43 12/21/03 (1)
  • Chris, I'm in Sweden until Jan. 2! More... - Jeff Olson 06:25:05 12/23/03 (0)
• reflections on radiators - ChuckNC 17:36:55 12/21/03 (3)
  • E23 won't work - Mike W. 18:18:15 12/21/03 (2)
    • that's it, just kill my dream - ChuckNC 14:57:39 12/22/03 (1)
      • Sorry... - Mike W. 00:18:03 12/23/03 (0)
• Blown Combination Realy-- Cause? - Brad In Texas 16:21:07 12/21/03 (2)
  • Re: Blown Combination Realy-- Cause? - Walt Barie 07:23:05 12/22/03 (1)
    • Thanks - Brad 10:53:41 12/22/03 (0)
• Blown Light - Dan Lafley 15:44:05 12/21/03 (2)
  • Re: Blown Light - Ryan bryan 20:59:42 12/21/03 (0)
  • Dumb question - Mike W. 18:44:10 12/21/03 (0)
• oh yeah...528i body decals?? - Art 14:28:18 12/21/03 (1)
  • I have the trunk set - Jeff C 15:48:45 12/21/03 (0)
• looking for K&N Filter Kit - Art 14:23:40 12/21/03 (2)
  • K&N Filter - John in Simi Valley 15:01:36 12/22/03 (1)
    • Re: K&N Filter - Blair 15:05:27 12/22/03 (0)
• its up for sale......... - newguyinold5er 10:40:46 12/21/03 (0)
• rocker adjusting cold? - rick 09:35:43 12/21/03 (7)
  • Always cold - Mike W. 15:37:43 12/21/03 (6)
    • Ok, Valves adjusted Now what???? (long) - rick 00:48:11 12/22/03 (5)
      • throttle body faq - Peter Florance 06:20:03 12/22/03 (2)
        • Re: throttle body faq - rick 19:33:07 12/22/03 (1)
          • pic of TDC condition attached - Peter Florance 21:06:29 12/22/03 (0)
      • Re: Ok, Valves adjusted Now what???? (long) - Mike W. 01:23:19 12/22/03 (1)
        • Re: Ok, Valves adjusted Now what???? (long) - rick 19:36:44 12/22/03 (0)
• question for the aussies - kav 01:57:18 12/21/03 (3)
  • Re: question for the aussies - Remy Davison 05:50:48 12/21/03 (2)
    • Re: question for the aussies - kav 19:30:55 12/21/03 (1)
      • Re: question for the aussies - Remy Davison 23:47:00 12/21/03 (0)
• Am I in over my head here??? - Brian In Calgary 01:21:12 12/21/03 (13)
  • I'm getting closer to decide to do it... - Brian in Calgary 13:32:42 12/21/03 (4)
    • Ok...you've convinced me - Brian in Calgary 19:55:18 12/21/03 (1)
      • A few details... - trubey 00:10:31 12/22/03 (0)
    • Go for it! - Mike W. 15:32:33 12/21/03 (0)
    • Re: I'm getting closer to decide to do it... - Ryan Bryan 15:29:17 12/21/03 (0)
  • will they pull it for you for a few more $$$..??> - chrystobal65 12:03:16 12/21/03 (0)
  • I'm not exactly young - Velocewest 09:59:29 12/21/03 (1)
    • bring a phone!!! - ChuckNC 15:33:33 12/21/03 (0)
  • Re: Am I in over my head here??? - Chris Hollis 08:54:43 12/21/03 (0)
  • im still young... - Ryan Bryan 08:44:36 12/21/03 (1)
    • Re: im still young... - Ryan Bryan 08:47:02 12/21/03 (0)
  • maybe i'm just getting old, but... - ...tom 06:16:24 12/21/03 (0)
  • Re: Am I in over my head here??? - james 05:28:56 12/21/03 (0)
• He shoots he SCORES!!! - Brian in Calgary 19:17:55 12/20/03 (3)
  • Grab that 5 speed!!!!! - Mike W. 20:24:33 12/20/03 (0)
  • Re: He shoots he SCORES!!! - Medly 19:51:35 12/20/03 (1)
    • PYP in Calgary - Brian in Calgary 22:50:32 12/20/03 (0)
• E12 B7 Alpina Headers? - Justin 17:47:47 12/20/03 (5)
  • Unless you are building a turbo..... - Blair 18:08:45 12/20/03 (4)
    • Peco or Stahl Headers will do fine. (NT) - Misha 20:49:43 12/20/03 (3)
      • Re: Peco or Stahl Headers will do fine. (NT) - Justin 01:26:49 12/21/03 (2)
        • 528e headers would be a no go... - Tulsa Dave 09:33:28 12/21/03 (1)
          • Re: 528e headers would be a no go... - Justin 11:33:32 12/21/03 (0)
• Re-Torquing Head Question - Brad In Texas 11:11:08 12/20/03 (7)
  • Re: Re-Torquing Head Question - Velocewest 10:38:43 12/21/03 (0)
  • Re: Re-Torquing Head Question - Frank H 13:06:58 12/20/03 (1)
    • Torque angle - Mike W. 14:08:44 12/20/03 (0)
  • Re: Re-Torquing Head Question - Mike W. 12:46:21 12/20/03 (3)
    • Re: Re-Torquing Head Question - Brad In Texas 13:22:03 12/20/03 (2)
      • Re: Re-Torquing Head Question - Frank H 16:54:12 12/20/03 (0)
      • It might work for that - Mike W. 14:02:42 12/20/03 (0)
• anyone running a 3.91 diff?? - jerry kingman 00:05:40 12/20/03 (4)
  • Re: anyone running a 3.91 diff?? - Jeff C 12:23:32 12/20/03 (0)
  • Re: anyone running a 3.91 diff?? - Troy Rudolph 06:16:00 12/20/03 (1)
    • agreed, even with the 3.64 and the 5spd.... - Blair 11:59:47 12/20/03 (0)
  • Re: anyone running a 3.91 diff?? - Blair 00:28:38 12/20/03 (0)
• anyone know this car in Huntington Beach, CA? - ...tom 17:53:19 12/19/03 (4)
  • Re: anyone know this car in Huntington Beach, CA? - jerry kingman 23:51:07 12/19/03 (0)
  • Re: anyone know this car in Huntington Beach, CA? - jerry kingman 23:50:22 12/19/03 (0)
  • Re: anyone know this car in Huntington Beach, CA? - jerry kingman 23:49:37 12/19/03 (0)
  • I'm pretty sure Don has seen it... - Eric Q 18:50:26 12/19/03 (0)
• bought the e34 - billy in SLO 11:48:11 12/19/03 (5)
  • Re: bought the e34 - Will Ollison 14:17:53 12/19/03 (0)
  • Re: bought the e34 - Don Daynes 12:35:01 12/19/03 (3)
    • thanks Don, good info - billy in SLO 16:08:08 12/19/03 (0)
    • So close! - Al from Oz 15:20:12 12/19/03 (0)
    • Re: bought the e34 - Tom Masters 13:09:43 12/19/03 (0)
• Starting Question.... - Tom Masters 11:39:07 12/19/03 (2)
  • Re: Starting Question.... - james 12:31:38 12/19/03 (1)
    • Re: Starting Question.... - Tom Masters 12:54:56 12/19/03 (0)
• Cold Start Problems- Low fuel pressure?? - Medly 05:39:23 12/19/03 (5)
  • Re: Cold Start Problems- Low fuel pressure?? - Robert Bondi 19:55:49 12/20/03 (0)
  • I have spares - Peter C 18:03:04 12/19/03 (1)
    • Re: I have spares - Medly 21:14:59 12/19/03 (0)
  • I have spares - Peter C 18:02:56 12/19/03 (0)
  • I'm thinking AFM or CSV - Remy Davison 06:55:07 12/19/03 (0)
• proxy - clowni 02:46:40 12/19/03 (0)
• Side Vents - Dan Lalffey 23:01:16 12/18/03 (1)
  • Three pegs on back- pull grille straight away from - Lars OBG 00:36:13 12/19/03 (0)
• M30 Block Markings - Misha 22:06:35 12/18/03 (3)
  • Re: M30 Block Markings - Don Daynes 06:56:46 12/19/03 (1)
    • Clarification - Troy Rudolph 09:31:53 12/19/03 (0)
  • Re: M30 Block Markings - Troy Rudolph 22:19:52 12/18/03 (0)
• pilot bushing (automatic)? - Martin 18:55:19 12/18/03 (5)
  • Maybe, (m) - Mike W. 20:46:23 12/18/03 (4)
    • Re: Maybe, (m) - Martin 22:32:28 12/18/03 (3)
      • Disaster, you need the bushing (m) - Don Daynes 06:48:18 12/19/03 (0)
      • Disaster - Mike W. 00:10:36 12/19/03 (1)
        • Thanks - Martin 09:06:24 12/19/03 (0)
• wtb, another e12 - ...tom 15:19:01 12/18/03 (1)
  • AZ Car, $650, no affil. - Troy Rudolph 16:57:11 12/18/03 (0)
• Could someone check this VIN # - Misha 12:43:49 12/18/03 (3)
  • ETK results - Troy Rudolph 12:50:15 12/18/03 (2)
    • cool !! - KSBinVA 13:49:42 12/18/03 (1)
      • Re: cool !! - Troy Rudolph 13:55:11 12/18/03 (0)
• Steering Wheel Removal - Derek 11:31:49 12/18/03 (3)
  • Re: Steering Wheel Removal - Randy 76/530 09:37:27 12/19/03 (0)
  • Re: Steering Wheel Removal - Jeff C 20:00:34 12/18/03 (0)
  • Re: Steering Wheel Removal - KSBinVA 11:51:35 12/18/03 (0)
• LSD in e12... Point of information. - Lars Olbimmerguy 09:23:56 12/18/03 (20)
  • they exist . - mikey 13:54:56 12/20/03 (2)
    • in 1980, they were all 3.45:1 - Troy Rudolph 16:28:51 12/20/03 (1)
      • even better - mikey 06:56:23 12/21/03 (0)
  • They exist, but rare, also choise of ratios in E28 - Mike W. 00:21:57 12/19/03 (2)
    • Re: They exist, but rare, also choise of ratios in E28 - Ryan Bryan 09:42:06 12/19/03 (1)
      • Theoretically better with E28 - Mike W. 20:29:13 12/19/03 (0)
  • Me too. 3.25 from factory ,,,,,,,,,,,,,,,,,,,nt - Jeff (Atl) 19:23:51 12/18/03 (0)
  • Re: LSD in e12... Point of information. - Kaveman 19:08:02 12/18/03 (0)
  • Dunno where he'd get that idea - Velocewest 16:20:05 12/18/03 (5)
    • Re: Dunno where he'd get that idea - TCD 18:52:48 12/18/03 (3)
      • You don't know the half of it Todd - Velocewest 20:34:56 12/18/03 (2)
        • Re: You don't know the half of it Todd - TCD 22:55:31 12/18/03 (1)
          • Santa's a fantasy. Just write the check. - Lars 23:13:46 12/18/03 (0)
    • long shot question - Peter Florance 18:49:51 12/18/03 (0)
  • e12's, e24', e9, and bavarias have/had LSD. - Ryan Bryan 09:33:31 12/18/03 (1)
    • Good answer! - Frank H 10:04:15 12/18/03 (0)
  • i have a 3.07 lsd in my now large paperweight, - ...tom 09:28:12 12/18/03 (3)
    • Speedo? - Troy Rudolph 12:44:57 12/18/03 (2)
      • ignorance is bliss... - ...tom 13:01:44 12/18/03 (1)
        • Odometer Reading low... - Jeff C 19:57:19 12/18/03 (0)
• dammit! - ChuckNC 08:12:04 12/18/03 (6)
  • Re: dammit! - Ryan Bryan 09:29:01 12/18/03 (2)
    • the big bumper... - ChuckNC 17:48:12 12/18/03 (1)
      • Naw Chuck.. Per Mercedes Tech... BMW stands for>>> - Lars OBG 19:26:52 12/18/03 (0)
  • My business is computer consulting..... - Lars Olbimmerguy 09:15:10 12/18/03 (2)
    • Re: My business is computer consulting..... - ChuckNC 17:50:41 12/18/03 (0)
    • That should be def of "consultant" any (nt) - Lars 09:17:07 12/18/03 (0)
• E28 E12 question about insturment cluster - christopher b 00:11:36 12/18/03 (2)
  • Re: E28 E12 question about insturment cluster - Remy Davison 08:00:16 12/19/03 (0)
  • does it say 'check'? - ..tom 06:20:46 12/18/03 (0)
• Paging Mike W. - Tito 23:32:07 12/17/03 (2)
  • Right here Tito - Mike W. 00:25:19 12/18/03 (1)
    • Re: Right here Tito - Tito 01:17:51 12/18/03 (0)
• You gotta be kidding $8000 E12 - Brian in Calgary 22:52:34 12/17/03 (4)
  • That's probably - Karl in KS 15:20:22 12/18/03 (0)
  • well lessee...that's about $6K.....maybe he thinks - chrystobal65 04:25:27 12/18/03 (0)
  • Re: You gotta be kidding $8000 E12 - Blair 01:58:12 12/18/03 (1)
    • Low value e12s - Mark 11:24:39 12/18/03 (0)
• Paging Troy: Regarding M30 Postq - Misha 21:17:16 12/17/03 (6)
  • Re: Paging Troy: Regarding M30 Postq - Troy Rudolph 21:54:43 12/17/03 (5)
    • On the oil pump - Mike W. 00:30:16 12/18/03 (3)
      • Re: On the oil pump - Troy Rudolph 09:55:58 12/18/03 (2)
        • That's what mine has - Karl in KS 15:26:42 12/18/03 (0)
        • Agreed: The folks at MM mention e12 oil pump - Misha 12:17:36 12/18/03 (0)
    • Use Plastigage if you refresh rod bearings..... - Lars Olbimmerguy 22:08:53 12/17/03 (0)
• Still evil water pump/fan clutch - Joel 20:34:22 12/17/03 (3)
  • Two kinds - Mike W. 20:52:16 12/17/03 (2)
    • Re: Two kinds - Joel 21:33:55 12/17/03 (1)
      • Radiator - Harm Grooten 06:13:33 12/18/03 (0)
• Stupid question alert: Redneck bumper pulling-out - Jim Race 19:56:17 12/17/03 (8)
  • I took a different tack... - Bill Bowes 19:59:33 12/19/03 (0)
  • I think(think) I have extra shocks if you want - Ryan Bryan 09:16:04 12/18/03 (0)
  • I have heard... - Mike W. 00:33:10 12/18/03 (0)
  • I did it - Troy Rudolph 21:06:58 12/17/03 (3)
    • Re: I did it too, but... - Bill Bowes 20:24:27 12/19/03 (0)
    • In the interest of public safety... ;) - Jim Race 23:41:19 12/17/03 (1)
      • Very gently, and ... - Troy Rudolph 09:53:16 12/18/03 (0)
  • Re: Stupid question alert: Redneck bumper pulling-out - Canada Karl 20:36:51 12/17/03 (0)
• TRANNY - Glen 15:51:12 12/17/03 (3)
  • Re: Tranny - Troy Rudolph 18:00:21 12/17/03 (1)
    • Re: Thank you Troy - Glen 22:52:18 12/17/03 (0)
  • Re: TRANNY - Velocewest 17:28:34 12/17/03 (0)
• Chain Tensioner/Damper - Medly 15:00:34 12/17/03 (1)
  • do it from the top - Peter Florance 15:08:16 12/17/03 (0)
• O2 sensor reset - Nishi 12:52:20 12/17/03 (2)
  • O2 sensor reset?, easy stuff! - Bob/E12/6er 13:21:58 12/17/03 (1)
    • O2 sensor reset?, easy stuff! - Nishi 15:03:24 12/17/03 (0)
• Longing to be back in the bimmer... - Joel 06:09:54 12/17/03 (1)
  • agreed... - Nick in Denver 10:25:20 12/18/03 (0)
• Badges arrive Downunder - Al from Oz 23:41:36 12/16/03 (4)
  • Hey Al, you guys sure do things different in the>> - Lars Olbimmerguy 00:09:39 12/17/03 (3)
    • One small problem though - Al from Oz 03:34:05 12/17/03 (1)
      • neither one of y'all is right! - ChuckNC 15:08:59 12/17/03 (0)
    • Try here for badge mounting kits (url) - Remy Davison 01:57:59 12/17/03 (0)
• my car for sale? :( - bigerik 23:39:12 12/16/03 (2)
  • What sort of springs are you using to obtain...... - Misha 20:24:45 12/17/03 (0)
  • Pic of Big Erik's Car - Troy Rudolph 14:14:34 12/17/03 (0)
• ne1 tryed a bored out throttle body? - marc79euro635 22:20:16 12/16/03 (9)
  • I'm interested too - Troy Rudolph 14:19:18 12/17/03 (8)
    • popular opinion is - RDAvena 14:49:40 12/17/03 (7)
      • Right, and ... - Troy Rudolph 17:38:41 12/17/03 (6)
        • Re: Right, and ... - RDAvena 09:18:46 12/18/03 (0)
        • Re: Right, and ... - RDAvena 09:17:19 12/18/03 (0)
        • on my car - Karl in KS 21:35:50 12/17/03 (2)
          • Re: on my car - Frank H 10:16:01 12/18/03 (1)
            • it's all about filling the cylinders - Peter Florance 11:45:52 12/18/03 (0)
        • What I have heard - Jeff C 19:27:01 12/17/03 (0)
• Thanks to Chris Hollis for help with E12 debacle! - Jeff Olson 22:00:23 12/16/03 (1)
  • no such luck - Chris Hollis 07:33:10 12/17/03 (0)
• Rear bulb blowssss... - Dan Lafley 20:02:21 12/16/03 (0)
• Tech-Bosch Injector Connectors - Mike Fields 17:07:00 12/16/03 (5)
  • heres some good info - marc79euro 635 22:05:10 12/16/03 (0)
  • source for bosch connectors - Velocewest 18:54:12 12/16/03 (3)
    • Re: source for bosch connectors - Pete 06:48:13 12/17/03 (0)
    • good prices - Peter Florance 05:26:13 12/17/03 (0)
    • Re: source for bosch connectors - Mike Fields 20:24:49 12/16/03 (0)
• Help - Dwight Plucker 17:00:20 12/16/03 (2)
  • try Independent BMW Service - Karl in KS 21:43:10 12/17/03 (1)
    • that's in La Jolla - Karl in KS 21:46:08 12/17/03 (0)
• Mild backfire, brief run in reverse, no start/run? - Jeff Olson 13:16:35 12/16/03 (14)
  • Re: Mild backfire, brief run in reverse, no start/run? - Alexa 11:57:37 12/21/03 (0)
  • NO START with starting fluid, more... - Jeff Olson 12:35:17 12/17/03 (4)
    • Timing, more - Mike W. 21:21:38 12/17/03 (0)
    • Re: NO START with starting fluid, more... - Chris Hollis, Huntsville, AL 13:09:23 12/17/03 (2)
      • DME = Digital Motor Electronic, but ... - Troy Rudolph 14:18:24 12/17/03 (1)
        • My bad, I meant the ECU, too many Bimmers, more... - Jeff Olson 22:29:48 12/17/03 (0)
  • Firing order and timing look O.K., more... - Jeff Olson 21:53:15 12/16/03 (3)
    • No start - Mike Fields 17:18:22 12/18/03 (0)
    • fuel pressure - Peter Florance 05:33:09 12/17/03 (0)
    • now i'm starting to think maybe injectors clogged - marc79euro 635 22:16:08 12/16/03 (0)
  • Check the valves - Mike W. 20:58:00 12/16/03 (0)
  • Checked firing order?? - Nick 17:45:16 12/16/03 (0)
  • Re: Mild backfire, brief run in reverse, no start/run? - Mike Fields 17:14:43 12/16/03 (1)
    • i'll bet your plug wires are wrong, Ive done it before - marc79euro 635 19:53:49 12/16/03 (0)
• Euro 3430cc on eBay - Troy Rudolph 12:55:04 12/16/03 (0)
• Nearly Free E12 on eBay (Florida) - Troy Rudolph 12:32:34 12/16/03 (0)
• Killer body part deals online....No affiliation - Matt C 11:25:28 12/16/03 (7)
  • Thanks Matt... guess what I found! - Randy 76/530 11:46:18 12/16/03 (2)
    • Im all set on the lights - Matt C 18:52:23 12/16/03 (0)
    • Im interested in the tail lights..email me(nt) - Ryan Bryan 12:16:09 12/16/03 (0)
  • Re: Killer body part deals online....No affiliation - Derek 11:44:45 12/16/03 (3)
    • Shipping to Canada - Brian in Calgary 01:00:58 12/17/03 (0)
    • Shipping was expensive... - Randy 76/530 11:48:27 12/16/03 (1)
      • Re: Shipping was expensive... - Derek 11:51:55 12/16/03 (0)
• Any better sugestions on exhaust - Tito 01:14:28 12/16/03 (5)
  • Re: Pls. ignore first post - Tito 01:22:42 12/16/03 (4)
    • Re: Pls. ignore first post - mikey 02:50:30 12/16/03 (3)
      • oops! silly me! forgot one thing - mikey 03:06:35 12/16/03 (2)
        • Find a good exhaust shop near you. - Mike in Chicago 09:29:27 12/16/03 (1)
          • Re: Thank's you guys - Tito 13:35:19 12/16/03 (0)
• just saying hello.... - Switch 23:20:16 12/15/03 (5)
  • Re: just saying hello.... - Bob in San Jose 01:15:55 12/16/03 (0)
  • Re: just saying hello.... - switch 00:32:04 12/16/03 (0)
  • We may not be much help for you here.... - Lars.... 00:23:21 12/16/03 (0)
  • 528e = E28 - Troy Rudolph (Webmaster) 23:53:21 12/15/03 (0)
  • Re: just saying hello.... - Switch 23:22:23 12/15/03 (0)
• Evil Water pump - Joel 19:36:45 12/15/03 (2)
  • Re: Evil Water pump - Robert Bondi 21:27:00 12/15/03 (1)
    • Re: Evil Water pump - Joel 07:35:47 12/16/03 (0)
• Great job Adam ! - Bob Humphrey 17:34:01 12/15/03 (2)
  • Happy Birthday Bob!!!........................eom - Eddie in Toronto 18:33:36 12/15/03 (1)
    • Thanks Eddie in Toronto - Bob Humphrey 19:00:47 12/16/03 (0)
• Headers for my bored 3.5l? - Justin 16:57:57 12/15/03 (4)
  • Re: Headers for my bored 3.5l? - Justin 17:30:47 12/16/03 (1)
    • Look in the E24 Section ! - Troy Rudolph 09:54:21 12/17/03 (0)
  • Re: Headers for my bored 3.5l? - Troy Rudolph 22:04:07 12/15/03 (1)
    • what about Stahl ? - Steve Haygood 07:41:49 12/16/03 (0)
• Extra Grill badge - Lou in Denver 16:06:29 12/15/03 (2)
  • Lou, I'll take it if you still have it. - Jeff C 16:19:20 12/15/03 (1)
    • Re: Lou, I'll take it if you still have it. - Lou in Denver 17:28:24 12/15/03 (0)
• Starts, quits and won't Run?!? - Neil in Ontario 13:42:42 12/15/03 (7)
  • Re: Starts, quits and won't Run?!? - gary in West OZ 02:13:14 12/18/03 (0)
  • a couple of things - Robert Bondi 21:18:34 12/15/03 (0)
  • try this - Steve Haygood 18:32:01 12/15/03 (0)
  • Re: Starts, quits and won't Run?!? - Canada Karl 16:47:24 12/15/03 (0)
  • Re: Starts, quits and won't Run?!? - Troy Rudolph 16:28:51 12/15/03 (1)
    • The crack most commonly occurs on >>> - Lars Olbimmerguy 00:21:41 12/16/03 (0)
  • Re: Starts, quits and won't Run?!? - Ryan 14:35:51 12/15/03 (0)
• Zender Style Trunk Spoiler - Derek 11:10:04 12/15/03 (5)
  • Re: Zender Style Trunk Spoiler - Erik M. 17:54:51 12/15/03 (4)
    • i have one on e12 #4 - ...tom 18:08:57 12/15/03 (3)
      • Re: i have one on e12 #4 - T.Han 00:02:51 12/16/03 (2)
        • 'Originals' - do you mean the BBS or the Zender? - Remy Davison 00:25:26 12/16/03 (1)
          • Re: 'Originals' - do you mean the BBS or the Zende - T.Han 09:19:44 12/16/03 (0)
• e12 for sale in calgary (canada) - Rami 10:06:56 12/15/03 (0)
• Oil Leaks - Brad In Texas 08:01:08 12/15/03 (1)
  • Seeping head gasket? It's possible. - Lars OBG 08:48:12 12/15/03 (0)
• Evil intermittent alternator - Joel 20:05:59 12/14/03 (2)
  • Re: Evil intermittent alternator - Remy Davison 20:21:47 12/14/03 (1)
    • Re: Evil intermittent alternator - Joel 20:46:44 12/14/03 (0)
• Quick painting question - Al from Oz 19:18:36 12/14/03 (3)
  • The crazed part was probably the clear coat - Lars 19:34:08 12/14/03 (2)
    • Thanks Lars - Al from Oz 20:10:14 12/14/03 (1)
      • Very Welcome. (nt) - Lars 20:15:09 12/14/03 (0)
• Goofy tach - Mike Fields 16:34:25 12/14/03 (5)
  • Re: Goofy tach - Peter Florance 17:17:20 12/14/03 (4)
    • Re: Goofy tach - Mike Fields 05:17:56 12/15/03 (3)
      • Re: Goofy tach - Peter Florance 06:28:12 12/15/03 (2)
        • Re: Goofy tach - Mike Fields 06:08:52 12/16/03 (1)
          • yes that's it - Peter Florance 06:20:56 12/16/03 (0)
• Not to sound stupid but... - Bill Hynes 15:49:23 12/14/03 (2)
  • sunroof drain and cabin ventilation - ...tom 16:56:48 12/14/03 (1)
    • No kidding? Thanks a lot. - Bill Hynes 17:13:02 12/14/03 (0)
• Off Topic Posts Removed - Troy Rudolph 15:08:09 12/14/03 (0)
• Got The Grille Badge! - Nick in Denver 22:31:59 12/13/03 (0)
• New driver in the family - Jeff C 10:59:35 12/13/03 (8)
  • Thanks all for the nice words. - Jeff C 21:46:10 12/14/03 (0)
  • Congrats. Stay on top of Parenting. None o this>> - Lars Olbimmerguy 23:43:51 12/13/03 (0)
  • Congrats, the greatest gift, life! (nt) - Mike W. 23:27:25 12/13/03 (0)
  • Re: New driver in the family - Chris Hollis, Huntsville 19:21:08 12/13/03 (0)
  • Mazel Tov! - ChuckNC 13:02:05 12/13/03 (0)
  • Re: New driver in the family - Jake Hall 11:53:36 12/13/03 (1)
    • Re: New driver in the family - Jake Hall 00:38:50 12/14/03 (0)
  • Re: New driver in the family - Ryan Bryan 11:35:28 12/13/03 (0)
• euro 5 - spoke too soon - ...tom 09:43:48 12/13/03 (5)
  • weber/intake might be worth something nt - stewart 09:40:17 12/15/03 (0)
  • Re: bumpers and interior - Pete 10:29:18 12/14/03 (0)
  • Re: value on bumpers... - Lars 11:34:15 12/13/03 (2)
    • Grab the 3.91 rear - Jeff C 22:20:22 12/13/03 (1)
      • and going from a 3.07 to a 3.91... - ...tom 06:50:53 12/14/03 (0)
• bilstein sports - peter mooney 06:46:57 12/13/03 (2)
  • got ya covered at 79.00 each new - Steve Haygood 09:15:16 12/15/03 (0)
  • Re: bilstein sports - KSBinVA 08:09:22 12/15/03 (0)
• Koni's vs. Bilsteins on our E12's - Tito 00:25:24 12/13/03 (4)
  • Re: Koni's vs. Bilsteins on our E12's - Steve Haygood 08:51:55 12/15/03 (3)
    • Re: Koni's vs. Bilsteins (uh???) - Walt Barie 15:48:01 12/15/03 (2)
      • Re: Koni's vs. Bilsteins (uh???) - Steve Haygood 18:18:33 12/15/03 (1)
        • Re: Koni's vs. Bilsteins (uh???) - Tito 18:57:20 12/15/03 (0)
• cold car reprise - Karl in KS 19:40:51 12/12/03 (2)
  • No problem at all - Matt C 07:50:04 12/13/03 (0)
  • One possible answer.... - Lars Olbimmerguy 21:30:21 12/12/03 (0)
• site is sloooooow...... - billy in SLO 18:12:45 12/12/03 (4)
  • Site slow... I seem ok @ 9:40 PST... Problem last - Alan A - Northern Calif 23:45:05 12/13/03 (0)
  • Have to concur... - Tulsa Dave 00:17:55 12/13/03 (0)
  • and... - ...tom 18:15:06 12/12/03 (1)
    • Re: and... - T.Han 20:18:38 12/12/03 (0)
• Tool Web Site - Troy Rudolph 11:57:05 12/12/03 (1)
  • Re: Tool Web Site - Velocewest 16:26:53 12/12/03 (0)
• BMW gets crushed - NC Doug 10:06:30 12/12/03 (1)
  • i feel so....violated. had a 533i same colour!! nm - chrystobal65 10:15:03 12/12/03 (0)
• advice on 78" 530i - Matt K 08:51:14 12/12/03 (3)
  • It Depends - Misha 11:59:51 12/12/03 (2)
    • Re: It Depends - matt k 14:28:28 12/12/03 (1)
      • Difficult to say - Misha 16:00:20 12/12/03 (0)
• stalling 1980 528i - Peter S 06:36:15 12/12/03 (4)
  • Re: stalling 1980 528i - Mike W. 01:01:00 12/13/03 (0)
  • Re: stalling 1980 528i - Gerry in ACT/Oz 17:14:29 12/12/03 (0)
  • Re: stalling 1980 528i - NC Doug 09:51:55 12/12/03 (1)
    • Re: stalling 1980 528i - Peter 05:18:47 12/15/03 (0)
• Junk Yard in Southern VA for E12 - Peter 12:30:49 12/11/03 (4)
  • I found one for you. - Jeff C 18:21:11 12/11/03 (0)
  • Re: Junk Yard in Southern VA for E12 - KSBinVA 12:53:05 12/11/03 (1)
    • stan = $$$ - Peter Florance 14:23:26 12/11/03 (0)
  • Re: Junk Yard in Southern VA for E12 - Michael K 12:49:50 12/11/03 (0)
• Stainless Steel Brake hoses - Brian in Calgary 23:43:41 12/10/03 (9)
  • Re: Stainless Steel Brake hoses - Brad In Texas 06:50:30 12/12/03 (0)
  • Re: Stainless Steel Brake hoses - Ryan Bryan 06:34:16 12/11/03 (0)
  • Re: Stainless Steel Brake hoses - Peter Florance 05:57:36 12/11/03 (0)
  • Re: Stainless Steel Brake hoses - Will Ollison 01:37:34 12/11/03 (0)
  • Re: Stainless Steel Brake hoses - Tom Masters 01:35:28 12/11/03 (3)
    • Maximillion .....only OEM parts - Brian in Calgary 08:38:32 12/11/03 (2)
      • Re: Maximillion .....only OEM parts - Ryan Bryan 09:40:25 12/11/03 (1)
        • Re: Maximillion .....only OEM parts - ChuckNC 11:28:44 12/11/03 (0)
  • WTF? - Velocewest 23:56:13 12/10/03 (0)
• Troy , , , did you figure out the grommet # for - Jeff (Atl) 22:34:41 12/10/03 (0)
• 80 528i BMW near Seattle for Sale - Phil in Poulsbo 20:24:31 12/10/03 (7)
  • Re: 80 528i BMW near Seattle for Sale - James in WhiteRock 01:51:58 12/11/03 (2)
    • Re: 80 528i BMW near Seattle for Sale - Phil in Poulsbo 11:48:06 12/11/03 (1)
      • Re: 80 528i BMW near Seattle for Sale - James in WhiteRock 11:59:32 12/15/03 (0)
  • Paging Brian in Calgary- Here's your rust free e12 - Bob in San Jose 20:38:01 12/10/03 (1)
    • Thanks Bob...but... - Brian in Calgary 23:36:16 12/10/03 (0)
  • Are you will ing to get rid of some parts? - Dan Lafley 20:36:46 12/10/03 (1)
    • Re: Are you will ing to get rid of some parts? - Phil Mansfield 20:45:45 12/10/03 (0)
• F/S: 1981 528i VIN WBACJ9509B678433 - Katherine Vaccaro 17:49:30 12/10/03 (0)
• Will an 81 528 PS Pump Fit an 81 733 Engine? (nt) - Chris 17:39:29 12/10/03 (3)
  • It will fit but the pressures are different - Nick 14:26:46 12/11/03 (1)
    • that is what the fuel pressure regulator is for - Steve Haygood 07:46:44 12/16/03 (0)
  • Re: Will an 81 528 PS Pump Fit an 81 733 Engine? (nt) - Michael K 18:13:45 12/10/03 (0)
• I need an E12 coolant evap tank Help!!!! - Peter 16:24:48 12/10/03 (3)
  • Re: I need an E12 coolant evap tank Help!!!! - Michael K 18:18:42 12/10/03 (2)
    • I think it may be the fuel evaporator tank - Peter 19:22:59 12/10/03 (0)
    • Re: I need an E12 coolant evap tank Help!!!! - Peter 19:00:17 12/10/03 (0)
• 2 E-12s For Sale - Thanks for your help! - Boston-Bimmer 14:18:16 12/10/03 (0)
• K&N Box Filter Advice - Brian in Calgary 14:14:44 12/10/03 (4)
  • Re: K&N Box Filter Advice - Steve Marburger 23:32:00 12/10/03 (3)
    • I like mine KN in stock box - Peter Florance 06:02:13 12/12/03 (1)
      • Cold Air intake - Brian in Calgary 10:28:17 12/12/03 (0)
    • Thanks Steve...that's what I was wondering..(nt) - Brian in Calgary 23:37:54 12/10/03 (0)
• may be selling my 528i - newguyinold5er 13:58:29 12/10/03 (0)