Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XXIV

(2003/12/31 - 2004/02/22)

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• years and models contain the 3.5 engine l jet - brian 10:48:12 02/22/04 (0)
• Complete L-Jet system + parts for sale.... - DJazz 08:19:31 02/22/04 (0)
• e28 fuel tank same as late e12? - Peter Florance 07:49:46 02/22/04 (1)
  • same part number - ...tom 09:00:32 02/22/04 (0)
• engine swap/ l jet system - brian 01:55:51 02/22/04 (2)
  • Re: engine swap/ l jet system - Karl in KS 08:35:46 02/22/04 (0)
  • Re: engine swap/ l jet system - Peter Florance 06:51:01 02/22/04 (0)
• E12 stuff For Sale...Interested? - Jeff Olson 22:35:17 02/21/04 (0)
• 78 530i - ara 21:50:04 02/21/04 (4)
  • Re: 78 530i - ChuckNC 09:04:51 02/22/04 (1)
    • Re: 78 530i - ara 09:13:23 02/22/04 (0)
  • Gosh folks!! A non-cracked dash OEM costs about - Lars Olbimmerguy 22:36:35 02/21/04 (1)
    • Same here. Mine if it was closer - Brian in Calgary 22:39:49 02/21/04 (0)
• WTB E12 Alpina B7S - euroe28m5 18:23:07 02/21/04 (6)
  • Re: WTB E12 Alpina B7S - Jim Davis 21:49:26 02/21/04 (2)
    • B7S - euroe28m5 10:22:43 02/22/04 (0)
    • Roundel one not a B7S, it's an E24 B7 Turbo - Adam Wilson in Chicago 22:53:12 02/21/04 (0)
  • ummmm EXTREMELY RARE - Adam Wilson in Chicago 19:01:32 02/21/04 (2)
    • hard to find - euroe28m5 10:54:33 02/22/04 (0)
    • did some email searching ..... - Adam Wilson in Chicago 08:23:26 02/22/04 (0)
• AT slipping, is it shot? - koop 10:47:44 02/21/04 (3)
  • Two fluid changes and a screen clean - Lars Olbimmerguy 15:52:58 02/21/04 (0)
  • you have mail............. - jim at da shop 14:16:40 02/21/04 (0)
  • Probably - Mike W. 13:31:28 02/21/04 (0)
• headlight question - Karl in KS 08:16:02 02/21/04 (0)
• e28 cluster does it work in an e12 - Rami 01:56:06 02/21/04 (1)
  • Yes...and no you don't want to - Remy Davisn 02:53:22 02/21/04 (0)
• Center drive shaft bearing?? - ET57 23:06:41 02/20/04 (1)
  • Re: Center drive shaft bearing?? - Peter Florance 07:32:11 02/21/04 (0)
• Don,Eric,anyone else,St Paddys day - jeff f 22:53:55 02/20/04 (1)
  • Yes, I'm there... - Eric Q 02:46:01 02/21/04 (0)
• Looking for a body near Ca - Justin 22:46:55 02/20/04 (3)
  • Re: Looking for a body near Ca - phil 09:44:04 02/22/04 (0)
  • Re: Looking for a body near Ca - jerry kingman 00:22:23 02/21/04 (0)
  • Re: Looking for a body near Ca - jeff 22:57:52 02/20/04 (0)
• E12 Gas Tank Leaks - Canada Karl 14:22:16 02/20/04 (9)
  • Check all the hoses - Jeff C 20:50:33 02/20/04 (0)
  • You can go under the car and , , , , - Jeff (Atl) 18:56:07 02/20/04 (0)
  • Re: E12 Gas Tank Leaks - Tom Masters 14:39:41 02/20/04 (6)
    • Re: E12 Gas Tank Leaks - Brian in Calgary 15:13:42 02/20/04 (5)
      • Re: E12 Gas Tank Leaks - Tom Masters 15:25:54 02/20/04 (4)
        • Re: E12 Gas Tank Leaks - Canada Karl 15:49:36 02/20/04 (3)
          • Re: E12 Gas Tank Leaks - Tom Masters 15:53:32 02/20/04 (2)
            • Re: E12 Gas Tank Leaks - Brian in Calgary 16:16:04 02/20/04 (1)
              • Re: E12 Gas Tank Leaks - Ryan Bryan 17:42:48 02/20/04 (0)
• carpet 528i 1979 - brian.hadlock@us.army.mil 14:17:31 02/20/04 (2)
  • Re: carpet 528i 1979 - Jim Hineline 22:31:53 02/20/04 (0)
  • Re: carpet 528i 1979 - Tom Masters 14:43:05 02/20/04 (0)
• egine swap 528i - BRIAN HADLOCK 14:00:34 02/20/04 (2)
  • Re: egine swap 528i - Art 10:13:20 02/21/04 (0)
  • link to FAQ - billy in SLO 16:50:10 02/20/04 (0)
• Trunk Question - NC Doug 09:43:34 02/20/04 (3)
  • Re: Trunk Question - Blair 13:36:19 02/20/04 (2)
    • Re: Trunk Question - Nick in Folsom, CA 13:57:00 02/20/04 (1)
      • Re: Trunk Question - Jeff (Atl) 18:49:05 02/20/04 (0)
• Any word on the Philly 5er fest? (nt) - Bill Hynes 09:42:17 02/20/04 (0)
• 5er Fest 2004 info is out on the e-mail list. - Darin O' The Glen 01:06:26 02/20/04 (1)
  • please add me to the list - Karl in KS 07:32:26 02/21/04 (0)
• Does E28 carpet fit? - Troy Rudolph 22:11:40 02/19/04 (3)
  • Looks nice... another option is - Dave D 07:36:13 02/20/04 (0)
  • I should think so on any car 79 or later.... - Lars Olbimmerguy 23:00:59 02/19/04 (1)
    • FWIW, Carpet was continuous along.... - Dave D 07:57:36 02/20/04 (0)
• Front end suspension bushings - Canada Karl 21:26:06 02/19/04 (2)
  • I've put urethane on my '80... - Tulsa Dave 07:06:00 02/20/04 (0)
  • May want to have your kidneys replaced first , , - Jeff (Atl) 06:44:00 02/20/04 (0)
• Anyone replaced trunk liner? - Brian in Calgary 21:09:19 02/19/04 (4)
  • E12 carpet better than E28? - Remy Davison 02:45:31 02/21/04 (1)
    • I read somewhere that it was a nice upgrade - Brian in Calgary 00:03:04 02/22/04 (0)
  • Re: Anyone replaced trunk liner? - Blair 13:40:42 02/20/04 (1)
    • The carpet - Brian in Calgary 15:16:11 02/20/04 (0)
• suspension upgrade help - Art 17:49:40 02/19/04 (6)
  • link - Troy Rudolph 22:06:59 02/19/04 (0)
  • thanks thanks thanks - Art 21:00:47 02/19/04 (0)
  • Re: suspension upgrade help - Art 18:39:52 02/19/04 (3)
    • ryan... - jim at da shop 19:27:40 02/19/04 (1)
      • Bavarian Auto Part and eBay.de for other items.... - Mishast 20:37:58 02/19/04 (0)
    • Re: suspension upgrade help - Ryan Bryan 18:53:46 02/19/04 (0)
• 1981 2.8 Motor for sale - Jason Robbins 16:02:02 02/19/04 (0)
• exhaust system info - jim at da shop 15:13:10 02/19/04 (1)
  • Thanks, Jim! (nt) - Brian in Abilene 19:30:56 02/19/04 (0)
• Tranny oil help - left my Haynes at home... - Neel 13:03:02 02/19/04 (2)
  • Re: Tranny oil help - left my Haynes at home... - ChuckNC 15:15:15 02/19/04 (0)
  • Re: Tranny oil help - left my Haynes at home... - jim at da shop 13:29:14 02/19/04 (0)
• Euro Bumpers - Neel 13:01:05 02/19/04 (2)
  • Re: Euro Bumpers - ChuckNC 15:13:35 02/19/04 (0)
  • neel,..call me at the shop - jim at da shop 13:24:20 02/19/04 (0)
• sport suspension...? - jim at da shop 11:46:37 02/19/04 (2)
  • Re: sport suspension...? - Jake Hall 14:36:53 02/19/04 (1)
    • sorry jake...just sold the pkg....:( - jim at da shop 14:49:32 02/19/04 (0)
• m535i - Stephen Mortimer 08:54:07 02/19/04 (3)
  • Location? - Nick in Denver 10:26:08 02/19/04 (2)
    • Re: Location? - stephen mortimer 10:29:00 02/19/04 (1)
      • More details please. - Al from Oz 20:24:23 02/19/04 (0)
• Exhaust Prices - NC Doug 08:12:23 02/19/04 (6)
  • If she's a keeper... - joe 11:13:16 02/19/04 (0)
  • Also... Thank this Man Heartily, because he is - Lars Olbimmerguy 09:21:52 02/19/04 (1)
    • Oop... Go Down a bit! - Lars 09:24:21 02/19/04 (0)
  • Can't directly answer your question, but... - Lars Olbimmerguy 09:16:16 02/19/04 (1)
    • i ,m with lars... on this one - mikey 03:20:18 02/20/04 (0)
  • Re: Exhaust Prices - Ryan Bryan 08:17:39 02/19/04 (0)
• BMW for sale in sydney, Australia - christopher blagonic 02:20:54 02/19/04 (0)
• Filter cartridges - Craig in Davis 23:35:10 02/18/04 (0)
• What a jerk... - Bill Hynes 21:21:55 02/18/04 (8)
  • Did you click on his link for the ad? - Brian in Calgary 20:34:50 02/19/04 (0)
  • A little ironic - Remy Davison 20:17:11 02/19/04 (0)
  • did you see some of the hoopties he's owned? - ChuckNC 09:45:02 02/19/04 (0)
  • What exactly.... - Randy 76/530 09:42:44 02/19/04 (0)
  • You may want to Thank This Man Heartily - Lars Olbimmerguy 09:23:49 02/19/04 (0)
  • maybe, but - Peter Florance - First Fives Dictator for Life 04:47:44 02/19/04 (0)
  • Re: What a jerk... - Al from Oz 22:23:58 02/18/04 (1)
    • Re: What a jerk... - rami 00:35:10 02/19/04 (0)
• Peter,I want to megasquirt,do you have software - marc79 euro635 19:50:40 02/18/04 (3)
  • Re: Peter,I want to megasquirt,do you have software - Lou in Denver 11:11:44 02/19/04 (1)
    • thanks Lou,will do ! - marc79euro635 19:06:40 02/19/04 (0)
  • yes I can send you whatever you want - Peter Florance 04:50:26 02/19/04 (0)
• E12 523? - Steve Dodds (UK) 16:41:05 02/18/04 (6)
  • No such thing ... - Troy Rudolph 18:58:05 02/18/04 (2)
    • It is possible though - Remy Davison 20:43:24 02/18/04 (1)
      • Possible, yes - Troy Rudolph 21:40:41 02/18/04 (0)
  • Well, there was an E21 323 from the same vintage - BRian in Abilene 16:45:53 02/18/04 (2)
    • No 523i - Mark 14:11:33 02/19/04 (1)
      • Re: No 523i - Remy Davison 02:23:04 02/21/04 (0)
• NewB 525 questions - Scott Schering 13:29:17 02/18/04 (3)
  • Re: NewB 525 questions - Frank H 21:00:18 02/18/04 (0)
  • Re: NewB 525 questions - Blair 13:33:04 02/18/04 (1)
    • Re: NewB 525 questions - Scott Schering 18:19:46 02/18/04 (0)
• OT.... sorta question... - jim at da shop 13:05:42 02/18/04 (1)
  • Re: OT.... sorta question... - Blair 13:29:17 02/18/04 (0)
• OEM BMW parts in So-Cal - Neel 12:53:21 02/18/04 (3)
  • Don't forget the internet... - Eric Q. 14:06:07 02/18/04 (0)
  • Mesa Performance in Newport Beach - Peter Claassen 12:59:55 02/18/04 (1)
    • Mesa is great - Peter Florance 17:00:40 02/18/04 (0)
• URGENT -- paging Bill Hynes -- URGENT - chrystobal65 12:50:55 02/18/04 (2)
  • Re: URGENT -- paging Bill Hynes -- URGENT - Bill Hynes 17:28:46 02/18/04 (1)
    • long story. check your email >> - chrystobal65 18:18:32 02/19/04 (0)
• Exhaust/Muffler Advice - Nick in Folsom, CA 11:54:28 02/18/04 (7)
  • Re: Exhaust/Muffler Advice - joe 09:11:02 02/19/04 (1)
    • Re: Exhaust/Muffler Advice - Nick in Folsom, CA 10:52:10 02/19/04 (0)
  • Re: Exhaust/Muffler Advice - jim at da shop 12:22:37 02/18/04 (4)
    • Re: Exhaust/Muffler Advice - Nick in Folsom, CA 14:53:00 02/18/04 (3)
      • I'd also be interested in more detail (more) - Brian in Abilene 15:32:33 02/18/04 (2)
        • Re: I'd also be interested in more detail (more) - Will Ollison 20:01:51 02/18/04 (1)
          • Thanks, Will. - Brian in Abilene 07:57:09 02/19/04 (0)
• 3.3 / 3.5 upgrades.....more info - jim at da shop 11:01:17 02/18/04 (1)
  • Re: 3.3 / 3.5 upgrades.....more info - joe 11:10:19 02/19/04 (0)
• Fuel Injection Additives????? Need Fiver Feedback - Canada Karl 11:01:11 02/18/04 (1)
  • bg44k - billy in SLO 17:14:32 02/20/04 (0)
• FS: Wheels and Bumpers - Nick in Folsom, CA 10:58:19 02/18/04 (0)
• Free 80 Euro 525 - Scott Schering 02:07:23 02/18/04 (4)
  • Grab those Euro indicators! - Remy Davison 20:46:40 02/18/04 (0)
  • Should be : I got a Free 80 Euro 525 - Scott Schering 08:40:56 02/18/04 (0)
  • I'm interested - stewart in slc 03:15:06 02/18/04 (1)
    • Opps.. Re: I'm interested - Scott Schering 08:38:00 02/18/04 (0)
• Front air dam/body kit - Dan J 00:28:50 02/18/04 (2)
  • Re: Front air dam/body kit - Nick in Folsom, CA 15:16:02 02/18/04 (0)
  • check out BMP Design - KSBinVA 09:47:53 02/18/04 (0)
• brand new, never mounted BBS E12 rear spoiler FS - Adam Wilson in Chicago 21:18:43 02/17/04 (1)
  • Re: brand new, never mounted BBS E12 rear spoiler FS - Temka 22:00:43 02/17/04 (0)
• Wild Wipers - Dan Lafley 21:13:40 02/17/04 (2)
  • battery cables? - Peter Florance 21:31:18 02/17/04 (0)
  • Exorcism? - Tulsa Dave 21:14:53 02/17/04 (0)
• 528i new purchase advice - Neel 20:58:11 02/17/04 (8)
  • welcome in, dawg!! >> - chrystobal65 16:49:13 02/18/04 (0)
  • Re: 528i new purchase advice - Ryan Bryan 09:50:42 02/18/04 (3)
    • Re: 528i new purchase advice - Neel 10:52:32 02/18/04 (2)
      • brake hoses - Peter Florance 16:59:37 02/18/04 (0)
      • Re: 528i new purchase advice - Ryan Bryan 11:57:49 02/18/04 (0)
  • Re: 528i new purchase advice - Chris Hollis, Huntsville, AL 09:22:42 02/18/04 (0)
  • performance - Peter Florance 21:53:21 02/17/04 (0)
  • Welcome! - Troy Rudolph 21:33:33 02/17/04 (0)
• in lebanon we call the e12s and e28s wattwatts.... - Rami 20:44:48 02/17/04 (4)
  • Re: in lebanon we call the e12s and e28s wattwatts.... - rami 22:32:18 02/17/04 (0)
  • Am I missing this? Why? - Tulsa Dave 21:13:36 02/17/04 (2)
    • Re: Am I missing this? Why? - Bill In Michigan 17:37:16 02/18/04 (0)
    • Re: Am I missing this? Why? - Canada Karl 22:04:23 02/17/04 (0)
• Should have put it in sooner..... - Lars Olbimmerguy 19:19:26 02/17/04 (7)
  • good visuals....happy trails....good luck!! nm - chrystobal65 16:55:01 02/18/04 (0)
  • Have spare shifting linkages - Peter C 11:20:57 02/18/04 (1)
    • Mesa has slaves on sale (oops not PC) - Peter C 13:01:00 02/18/04 (0)
  • LOL Lars, I'm getting the full visual! - Velocewest 21:24:57 02/17/04 (1)
    • Yeah, and as you may certainly be aware.... - Lars 21:47:14 02/17/04 (0)
  • I've been through this exact same thing... - Tulsa Dave 20:43:30 02/17/04 (0)
  • Re: Should have put it in sooner..... - Jim 20:28:20 02/17/04 (0)
• Speaking of bulbs... - Velocewest 17:51:37 02/17/04 (0)
• 5er Fest 2004 date has been set! 25 Sep 04. - Darin O' The Glen 15:34:22 02/17/04 (9)
  • I may try to make it...the folks are in SoCal and - Brian in Abilene 11:13:46 02/18/04 (0)
  • not looking good for me either - Bill Hynes 08:49:38 02/18/04 (0)
  • sounds good....nt - Robert Bondi 21:47:41 02/17/04 (0)
  • Oh, it's too far for me... - Eric Q 21:09:47 02/17/04 (0)
  • Where located? - Art 17:08:09 02/17/04 (2)
    • Re: Where located? - jim at da shop 17:14:00 02/17/04 (1)
      • www.5erfest.com - jim at da shop 17:14:46 02/17/04 (0)
  • Re: 5er Fest 2004 date has been set! 25 Sep 04. - Tom Masters 16:43:11 02/17/04 (1)
    • Counts me out too... - Tulsa Dave 18:05:49 02/17/04 (0)
• Post 77 oil filter assembly - Dan Lafley 15:09:52 02/17/04 (2)
  • Re: Post 77 oil filter assembly - jim at da shop 15:14:18 02/17/04 (0)
  • Re: Post 77 oil filter assembly - jim at da shop 15:14:17 02/17/04 (0)
• 3.3 / 3.5 upgrades anyone..? - jim at da shop 14:19:23 02/17/04 (0)
• sport suspension? - Art 11:50:21 02/17/04 (4)
  • Re: sport suspension? - Art 11:52:20 02/17/04 (3)
    • Re: sport suspension? - Blair 12:33:15 02/17/04 (2)
      • Re: sport suspension? - Art 16:15:39 02/17/04 (1)
        • Re: sport suspension? - Blair 16:36:11 02/17/04 (0)
• Starter Problem - Dan Lafley 02:47:51 02/17/04 (3)
  • Re: Starter Problem - richard 13:54:31 02/17/04 (0)
  • Re: Starter Problem - Ryan Bryan 06:53:19 02/17/04 (0)
  • Bosch or other ?? - Jeff (Atl) 06:38:58 02/17/04 (0)
• I never knew I had PDL - Brian in Calgary 23:44:27 02/16/04 (8)
  • how did you open your gas tank? - ChuckNC 10:51:53 02/17/04 (3)
    • Gas tank is totally manual..no lock (nt) - Brian in Calgary 13:07:21 02/17/04 (2)
      • Yes, it has a lock! - Troy Rudolph 21:38:23 02/17/04 (0)
      • You sure about that? - Tulsa Dave 21:17:43 02/17/04 (0)
  • And if you install an alarm system..... - Eddie in Toronto 07:46:52 02/17/04 (0)
  • There are plastic retainers that hold , , , - Jeff (Atl) 06:45:09 02/17/04 (0)
  • Lubricate driver's lock with contact spray - Remy Davison 01:19:36 02/17/04 (0)
  • I knew my 81 had them, but did not know my 80 did> - Lars OBG 23:49:29 02/16/04 (0)
• 530i and 3.5 and Z3 - Canada Karl 20:44:37 02/16/04 (4)
  • Re: 530i and 3.5 and Z3 - Troy Rudolph 22:10:49 02/16/04 (2)
    • ...and Euro 2.8 was 184bhp - Remy Davison 20:27:37 02/17/04 (0)
    • Re: 530i and 3.5 and Z3 - Canada Karl 00:08:39 02/17/04 (0)
  • New Z4 is 184hp for 2.5, 225 for 3.0 (nt) - Brian in Abilene 20:55:44 02/16/04 (0)
• WTB steering box for e3 e-mail me - Steve 19:08:41 02/16/04 (0)
• Paging James from New Zealand (Tii parts) - Peter Florance 17:31:37 02/16/04 (0)
• gas leak? (1979 528i) - Steve G 13:21:34 02/16/04 (10)
  • Re: gas leak? (1979 528i) - Don Daynes 09:30:17 02/17/04 (0)
  • Re: gas leak? (1979 528i) - Ryan Bryan 13:56:27 02/16/04 (2)
    • Re: gas leak? (1979 528i) - Steve G 19:07:38 02/16/04 (0)
    • Re: gas leak? (1979 528i) - Ryan Bryan 14:02:50 02/16/04 (0)
  • Re: gas leak? (1979 528i) - ChuckNC 13:55:10 02/16/04 (0)
  • On my 2002, it was the fuel filler neck. - Brian in Abilene 13:35:02 02/16/04 (4)
    • Re: On my 2002, it was the fuel filler neck. - Steve G 19:13:18 02/16/04 (3)
      • No "generic crap" !! NAPA has , , , , , - Elliot Murphy 21:02:31 02/16/04 (0)
      • Re: On my 2002, it was the fuel filler neck. - Ryan Bryan 20:06:08 02/16/04 (1)
        • Ditto, Ryan, and you can do it yourself. (nt) - Brian in Abilene 20:10:47 02/16/04 (0)
• 530i "touring"??? - Canada Karl 10:53:14 02/16/04 (13)
  • How about an E12 520i Touring - Luke 10:29:35 02/17/04 (6)
    • I Knew IT!! I knew I had seen an e12 touring, and - Lars OBG 19:30:47 02/17/04 (0)
    • Whoa, that's Bangley! - Velocewest 17:56:33 02/17/04 (4)
      • Cool, but think you mean Lotus Eclat - Remy Davison 20:31:56 02/17/04 (3)
        • Nope, we're both wrong, I was thinking of the back - Velocewest 21:33:09 02/17/04 (2)
          • Nope, that was the ODD Elite ..1974 (Broken into) - Lars 21:51:54 02/17/04 (0)
          • Re: Nope, we're both wrong, I was thinking of the back - Canada Karl 21:44:42 02/17/04 (0)
  • started in 1993(4?) with the e34 5-series - ...tom 16:10:26 02/16/04 (0)
  • How about this for the "Final Tour".... E3 based - Lars Olbimmerguy 11:43:01 02/16/04 (3)
    • Re: How about this for the "Final Tour".... E3 based - Canada Karl 15:59:06 02/16/04 (0)
    • And this on the 2002.. So, it's hard to believe - Lars 11:46:42 02/16/04 (1)
      • Re: And this on the 2002.. So, it's hard to believe - Canada Karl 16:02:46 02/16/04 (0)
  • I believe that was a 90's wagon (nt) - Lou in Denver 10:57:47 02/16/04 (0)
• '78 530i on ebay - ...tom 06:44:18 02/16/04 (2)
  • This one's up again , , , , nt - Jeff (Atl) 07:56:50 02/16/04 (0)
  • Re: '78 530i on ebay - Glad it's on the wrong coast 07:15:42 02/16/04 (0)
• transmisson problems - christopher blagonic 06:04:53 02/16/04 (1)
  • Re: transmisson problems - Ryan Bryan 08:12:09 02/16/04 (0)
• Driveline probs - Joel 01:15:03 02/16/04 (2)
  • Auto anti-vibration mount - Joel 05:24:24 02/16/04 (1)
    • Re: Auto anti-vibration mount - Peter Florance 07:04:38 02/16/04 (0)
• Rear brakes - Daniel 00:46:57 02/16/04 (4)
  • Giant Screwdriver - Troy Rudolph 22:16:26 02/16/04 (0)
  • I've done well - Karl in KS 17:06:50 02/16/04 (0)
  • giant channel locks - Peter Florance 07:06:54 02/16/04 (0)
  • Re: Rear brakes - Joel 01:06:29 02/16/04 (0)
• Removing reactors??? - ET57 21:54:20 02/15/04 (4)
  • Re: Removing reactors??? - Daniel 00:49:32 02/16/04 (3)
    • Re: Removing reactors??? - Blair 01:16:26 02/16/04 (2)
      • Re: Removing reactors??? - ET57 20:37:52 02/16/04 (0)
      • Bavarian manifolds in Classifieds , , , nt - Jeff (Atl) 08:01:27 02/16/04 (0)
• No Start - need help - Mr.Coffey 19:28:04 02/15/04 (5)
  • First thing I would check... - Brian in Abilene 20:07:24 02/15/04 (4)
    • Re: First thing I would check... - Mr. Coffey 21:10:14 02/15/04 (3)
      • Re: First thing I would check... - Mike W. 00:35:43 02/16/04 (2)
        • Yes, those are the ones... - Brian in Abilene 08:10:08 02/16/04 (1)
          • Thanks - I'll check that - Mr. Coffey 23:23:52 02/16/04 (0)
• Found the noise - ET57 19:19:21 02/15/04 (0)
• Looking for grill centerpiece and left turn signal - Steve G 17:03:52 02/15/04 (1)
  • i have three possibilities for you: >> - chrystobal65 12:46:06 02/18/04 (0)
• Spark Plug Caps - Medly 16:38:47 02/15/04 (0)
• Fuel Pump? - Dan J 14:22:13 02/15/04 (1)
  • Dan, I've got a used spare you can have. - Brian in Abilene 14:28:26 02/15/04 (0)
• Any E12er's in san Diego? - Kaveman 11:49:06 02/15/04 (0)
• Looking for E12 flywheel - rexmo 09:04:18 02/15/04 (1)
  • Re: Looking for E12 flywheel - Ryan Bryan 10:03:22 02/15/04 (0)
• One more mystery plug? - ET57 23:11:53 02/14/04 (4)
  • Re: One more mystery plug? - Funf Dreisig 07:51:49 02/15/04 (3)
    • Or you can remove it because - Mike W. 14:16:14 02/15/04 (2)
      • But it is so cool looking;) - Funf Dreisig 19:28:26 02/15/04 (1)
        • Well, I inevitably - Mike W. 00:40:01 02/16/04 (0)
• got it started (long) - ET57 22:42:05 02/14/04 (4)
  • Cheap Fix to warm running... maybe?? - Lars Olbimmerguy 22:52:49 02/14/04 (3)
    • Re: Cheap Fix to warm running... maybe?? - Funf Dreisig 08:21:27 02/15/04 (0)
    • Re: Cheap Fix to warm running... maybe?? - ET57 22:56:01 02/14/04 (0)
    • Have also heard a bad under dash ground can - Lars 22:54:16 02/14/04 (0)
• Paging: Blair - Misha 22:14:53 02/14/04 (2)
  • Re: Paging: Blair - Blair 02:39:06 02/15/04 (1)
    • Thanks: NT - Misha 15:00:10 02/15/04 (0)
• wiper switch - Karl in KS 14:34:45 02/14/04 (2)
  • Doesn't the E12 already have a single wipe?? - Remy Davison 07:28:13 02/15/04 (0)
  • You would need a different relay - Mike W. 16:34:33 02/14/04 (0)
• '75 530i in Memphis for sale - Jeff (Atl) 10:29:08 02/14/04 (0)
• need help! - Temka 05:33:25 02/14/04 (2)
  • I ship cameras worldwide.... - Lars 12:17:52 02/14/04 (0)
  • try www.iship.com - ...tom 06:57:07 02/14/04 (0)
• 528i master cylinder question - Peter 01:01:54 02/14/04 (4)
  • Re: 528i master cylinder question - gary in west OZ 22:21:47 02/17/04 (0)
  • Re: 528i master cylinder question - Cristian in Sydney 14:33:05 02/15/04 (0)
  • Re: 528i master cylinder question (long) - Remy Davison 06:36:06 02/14/04 (0)
  • Re: 528i master cylinder question - Joel 04:10:42 02/14/04 (0)
• Dimensions of the M30 con rods - DB 00:01:32 02/14/04 (5)
  • They are all the same - Mike W. 00:27:18 02/14/04 (4)
    • The big blue book says - Mike W. 17:02:13 02/14/04 (3)
      • Thanks for the info. Do you have anymore on the - DB 06:34:32 02/15/04 (1)
        • Re: Thanks for the info. Do you have anymore on the - Mike W. 14:14:10 02/15/04 (0)
      • ... but the cranks aren't - Funf Dreisig 17:44:59 02/14/04 (0)
• Parting out an e28.. - John in NH 20:02:17 02/13/04 (0)
• Valve Stem Seals revisited... - Klaus 19:46:58 02/13/04 (2)
  • I've heard claims... - Mike W. 23:34:04 02/13/04 (1)
    • Re: I've heard claims... - Mark 13:17:26 02/14/04 (0)
• e12 coilovers - peter mooney 19:31:33 02/13/04 (1)
  • Re: e12 coilovers - Misha 21:49:48 02/14/04 (0)
• stupid question. but can't find it in the manual - black81 16:30:34 02/13/04 (2)
  • factory locations are center of diff and front sub - Sam SChultz 19:15:02 02/13/04 (0)
  • what I do - Peter Florance 17:14:08 02/13/04 (0)
• Paging Lars to the antique courtesy phone - ChuckNC 12:35:19 02/13/04 (1)
  • Got It!... I just emailed the man. - Lars OBG 12:56:37 02/13/04 (0)
• can you put a pass side mirror from an E23> - chrystobal65 12:30:16 02/13/04 (0)
• idle adjustment,I advanced my timing to see if it - marc79 euro635 12:23:12 02/13/04 (4)
  • I advance timing... - Karl in KS 21:24:38 02/13/04 (2)
    • on which engine? mine's an '81. will that work? nm - chrystobal65 07:43:11 02/14/04 (1)
      • Re: on which engine? mine's an '81. will that work? nm - Peter Florance 17:59:59 02/14/04 (0)
  • throttle FAQ - Peter Florance 13:55:48 02/13/04 (0)
• NGK sparkplugs for 528 - Model # ? - Peter C 10:16:55 02/13/04 (4)
  • I use the 5ES with extreme good longevity.. - Lars OBG 12:52:42 02/13/04 (0)
  • BP5ES or BP6ES will work fine.....(nt) - Frank H 10:25:08 02/13/04 (2)
    • The car pings a lot .... - Peter C 11:17:19 02/13/04 (1)
      • Re: The car pings a lot .... - Ryan Bryan 11:48:32 02/13/04 (0)
• a fun if illegal way to get a new BMW!! (link) - chrystobal65 09:29:32 02/13/04 (0)
• Peter Florance....Tried to email you.... - Jon in Richmond 07:48:18 02/13/04 (0)
• transmisson problems - christopher blagonic 06:55:13 02/13/04 (2)
  • Sounds like the forward gear clutch pack. - Lars Olbimmerguy 08:21:54 02/13/04 (1)
    • other thing that happens - Steve Haygood 00:53:27 02/14/04 (0)
• 528i Parts List - Jay Neal 06:21:45 02/13/04 (0)
• B&G vs Intrax springs - Zolka 03:26:03 02/13/04 (0)
• R&R'ing the Heater Core - Medly 01:39:30 02/13/04 (5)
  • Cheap Cheap wreckers... - Brian in Calgary 08:34:09 02/13/04 (4)
    • Re: Cheap Cheap wreckers... - Medly 17:02:24 02/14/04 (3)
      • gotcha...but which cheap wrecker? (nt) - Brian in Calgary 01:09:26 02/15/04 (2)
        • www.bucksautoparts.com (nt) - Medly 02:42:34 02/15/04 (1)
          • Thank...be there tomorrow (nt) - Brian in Calgary 22:35:54 02/15/04 (0)
• forgot to add.. - Dan J 18:09:06 02/12/04 (3)
  • Re: forgot to add.. - Funf Dreisig 10:32:15 02/13/04 (2)
    • That's right - Karl in KS 21:32:22 02/13/04 (0)
    • OK sounds good - Dan J 16:39:23 02/13/04 (0)
• OK! I determined the problem.. almost got this ! - Dan J 18:07:30 02/12/04 (4)
  • Try this.... - Wietse 10:26:57 02/13/04 (0)
  • My money's still on the relay. - Remy Davison 07:20:26 02/13/04 (0)
  • use Mike W's method to test fuel pump - Peter Florance 18:15:59 02/12/04 (1)
    • check for power before messing with the pump - Sam Schultz 20:13:47 02/12/04 (0)
• OK, here it is: Pics of the alpina springs! - Blair 15:51:37 02/12/04 (9)
  • Re: OK, here it is: Pics of the alpina springs! - Canada Karl 10:44:14 02/13/04 (1)
    • I know the vents you are talking about, - Blair 11:31:53 02/13/04 (0)
  • wow, that's a REeeeal nice car - Adam Wilson in Chicago 20:22:23 02/12/04 (6)
    • Re: wow, that's a REeeeal nice car - Blair 23:08:40 02/12/04 (5)
      • Send Troy the details for COTM... - Tulsa Dave 23:17:09 02/12/04 (3)
        • If the Trailer Queen made it..... - Brian in Calgary 23:54:51 02/12/04 (2)
          • Need more inspiration??? - Tulsa Dave 00:04:18 02/13/04 (1)
            • Hey, maybe I'll submit my old one - Mike W. 23:28:32 02/13/04 (0)
      • Blair, you really need to submit to Troy for COTM - Adam Wilson in Chicago 23:16:18 02/12/04 (0)
• anyone have a 3.45 or 3.64 lsd fs or trade? - ...tom 14:50:50 02/12/04 (1)
  • Re: anyone have a 3.45 or 3.64 lsd fs or trade? - Jay Neal 06:24:22 02/13/04 (0)
• '79 528i w/'Euro' bumpers. FS in FLA... - Jeff Olson 14:45:24 02/12/04 (6)
  • Yep... looks like the US bumper on the rear... - Lars... 22:02:02 02/12/04 (1)
    • totally.....and the front indicators might be > - chrystobal65 20:38:43 02/13/04 (0)
  • Euro cars poppin up everywhere - Luke 17:15:25 02/12/04 (3)
    • Re: word to that...... - 2002sue 18:51:12 02/12/04 (1)
      • sue...wwould you call me in the am..? - jim at da shop 19:40:53 02/12/04 (0)
    • Re: word to that...... - 2002sue 18:50:45 02/12/04 (0)
• 'Euro' E12 525i in Miami, FL, For Sale! - Jeff Olson 14:41:48 02/12/04 (2)
  • I would buy that car, but the phone number was , , - Jeff (Atl) 23:13:38 02/12/04 (1)
    • i called when the ad came out and it was sold. - ...tom 05:19:46 02/13/04 (0)
• must...go...fast.... - Art 12:19:20 02/12/04 (16)
  • Its called an M106 - Matt B 09:29:42 02/13/04 (0)
  • Put E34 M5 engine+Supercharger - Zolka 03:08:42 02/13/04 (0)
  • Turbo or a Mustang - Mark 00:59:09 02/13/04 (1)
    • Mustang - Matt B 09:20:31 02/13/04 (0)
  • Re: must...go...fast.... - Art 18:21:11 02/12/04 (1)
    • Stock is 3.45:1 in '79 with auto or manual (eom) - Troy Rudolph 22:47:02 02/12/04 (0)
  • Re: must...go...fast.... - peter mooney 15:10:04 02/12/04 (2)
    • When is this beast going to be finished? - TCD 17:42:46 02/12/04 (1)
      • Re: When is this beast going to be finished? - peter mooney 19:37:57 02/12/04 (0)
  • Re: must...go...fast.... - Velocewest 13:57:18 02/12/04 (0)
  • Re: must...go...fast.... - Velocewest 13:57:01 02/12/04 (0)
  • 3400 Pound Car... 225 Cubic Inches.... - Lars Olbimmerguy 13:54:40 02/12/04 (1)
    • Oops . forgot the link - Lars 14:05:05 02/12/04 (0)
  • Re: must...go...fast.... - Ryan Bryan 13:47:38 02/12/04 (0)
  • More isn't easy... - Mike W. 13:03:13 02/12/04 (0)
  • Re: must...go...fast.... - jim at da shop 12:26:10 02/12/04 (0)
• Nice M535i on ebay.de - JB in Canada 08:02:14 02/12/04 (4)
  • Re: Nice M535i on ebay.de - james 11:36:22 02/12/04 (2)
    • Re: Nice M535i on ebay.de - Jake Hall 11:51:57 02/12/04 (1)
      • Re: Nice M535i on ebay.de - Niklas Edlund 02:34:22 02/16/04 (0)
  • Re: Nice M535i on ebay.de - Jake Hall 09:11:10 02/12/04 (0)
• Need Momo hub for E12 - Brett Anderson 00:29:23 02/12/04 (2)
  • Re: Need Momo hub for E12 - Niklas Edlund 02:28:17 02/16/04 (0)
  • Re: Need Momo hub for E12 - jim at da shop 09:51:32 02/12/04 (0)
• Phantom e12 problem fixed? - Joel 23:18:52 02/11/04 (0)
• Help! Have some more stuff to tell about my car.. - Dan J 17:36:47 02/11/04 (14)
  • Alright I'll check today - Dan J 08:31:37 02/12/04 (1)
    • There's two - Mike W. 12:43:22 02/12/04 (0)
  • fuel injection conversion leftover? - Peter Florance 06:35:59 02/12/04 (0)
  • Did you check the AFM - Dan Lafley 00:38:36 02/12/04 (0)
  • Check the AFM bellows - Troy Rudolph 21:36:10 02/11/04 (0)
  • Testing the fuel pump - Mike W. 21:18:17 02/11/04 (0)
  • the combo relay is the big one right behind the - marc79euro635 20:28:55 02/11/04 (1)
    • Does the "injection rack" look stock to you? - Funf Dreisig 21:20:42 02/11/04 (0)
  • Re: Help! Have some more stuff to tell about my car.. - Funf Dreisig 20:06:10 02/11/04 (0)
  • Re: Help! Have some more stuff to tell about my car.. - Jeff (Atl) 18:59:40 02/11/04 (2)
    • Ok thanks again.. - Dan J 20:08:08 02/11/04 (0)
    • Re: Help! Have some more stuff to tell about my car.. - Funf Dreisig 19:07:09 02/11/04 (0)
  • Re: Help! Have some more stuff to tell about my car.. - Chris Hollis, Hunts, AL 18:58:07 02/11/04 (0)
  • Re: Help! Have some more stuff to tell about my car.. - Funf Dreisig 18:14:25 02/11/04 (0)
• First Fives Dictator!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - Jon in Richmond 14:24:15 02/11/04 (0)
• Lowering springs? - Canada Karl 12:18:38 02/11/04 (11)
  • Yknot coilovers? - peter mooney 14:10:59 02/11/04 (6)
    • how about posting a pic please! - marc79euro635 17:10:50 02/11/04 (5)
      • Re: how about posting a pic please! - peter mooney 21:01:36 02/11/04 (4)
        • nice Peter,what size springs,weight,perch length? - marc79 euro635 22:40:44 02/11/04 (3)
          • Re: nice Peter,what size springs,weight,perch length? - peter mooney 10:33:38 02/12/04 (0)
          • welding; one caution. Please TIG by pro. - Peter Florance - First Fives Dictator for Life 06:49:57 02/12/04 (1)
            • Re: welding; one caution. Please TIG by pro. - peter mooney 10:44:45 02/12/04 (0)
  • no, and....no... - Ryan Bryan 12:32:46 02/11/04 (3)
    • B&G - Velocewest 16:53:33 02/11/04 (0)
    • Re: no, and....no... - Blair 12:55:48 02/11/04 (1)
      • Can someone host this picture of springs? - Jeff (Atl) 22:24:03 02/11/04 (0)
• More Brakelight / Running Lights FAQ? - Dave D 10:16:10 02/11/04 (2)
  • Great idea dave, I was just wondering - Blair 10:46:23 02/11/04 (1)
    • Hmmm, not sure... - Dave D 17:25:50 02/11/04 (0)
• What should I clean my headliner with? - NC Doug 09:02:24 02/11/04 (8)
  • Re: What should I clean my headliner with? - Jim Davis 13:36:35 02/12/04 (0)
  • Headliner alternatives - peter mooney 14:19:05 02/11/04 (0)
  • Woolite in a can - Matt C 12:26:32 02/11/04 (0)
  • Paint it. Long but useful. - Misha 11:30:29 02/11/04 (2)
    • Re: Paint it. Long but useful. - Releaf1 17:22:04 02/11/04 (0)
    • painted mine with nuvinyl spray - marc79 euro635 17:13:51 02/11/04 (0)
  • Re: What should I clean my headliner with? - Ryan Bryan 10:19:53 02/11/04 (0)
  • I recently discussed this with a restoration guy.. - Tulsa Dave 09:23:25 02/11/04 (0)
• Paging all firstfive Lawyers - Tom in NY 08:16:58 02/11/04 (5)
  • unless the authorities... - Randy 76/530 13:21:48 02/11/04 (0)
  • Re: Paging all firstfive Lawyers - Funf Dreisig 10:20:19 02/11/04 (1)
    • In the end... - Randy 76/530 13:45:55 02/11/04 (0)
  • Re: Paging all firstfive Lawyers - Ryan Bryan 10:12:35 02/11/04 (1)
    • I'm not a lawyer but I play one in real life... - peter mooney 11:26:21 02/11/04 (0)
• e12 front spoiler ebay,de - james 00:54:16 02/11/04 (0)
• RIP My 77 530i - Dave nYc 20:48:10 02/10/04 (2)
  • RIP??? - ChuckNC 08:31:18 02/11/04 (0)
  • Re: RIP My 77 530i - Funf Dreisig 21:17:34 02/10/04 (0)
• kugelfischer injectors. - James from New Zealand 20:34:49 02/10/04 (6)
  • Another US source - Velocewest 11:45:10 02/11/04 (0)
  • Re: kugelfischer injectors. - james 00:47:01 02/11/04 (0)
  • Try this guy... US, but a good guy and a Tii Pro - Lars Olbimmerguy 23:45:17 02/10/04 (0)
  • Re: kugelfischer injectors. - Remy Davison 23:08:24 02/10/04 (0)
  • Try diesel injectors specialists - Mike W. 21:56:08 02/10/04 (1)
    • Or post on the 2002 boards (nt) - Mike W. 00:14:15 02/11/04 (0)
• engine on ebay 3.4 e28 - rami 14:16:58 02/10/04 (0)
• parting '77 530 - ...tom 13:33:50 02/10/04 (3)
  • cool, orange! Is it rusty? - Adam Wilson in Chicago 21:13:22 02/10/04 (1)
    • very, thus the trip to the crusher (NT) - ...tom 19:12:30 02/11/04 (0)
  • Re: parting '77 530 - Funf Dreisig 16:10:08 02/10/04 (0)
• weights - peter mooney 13:17:56 02/10/04 (3)
  • Re: weights - Funf Dreisig 22:26:16 02/10/04 (0)
  • Re: weights - 77\530i 20:34:20 02/10/04 (1)
    • Not quite - Mike W. 21:51:47 02/10/04 (0)
• Exterior mirrors - Martin 11:12:43 02/10/04 (5)
  • Yes, but not quite a bolt on - Mike W. 20:44:58 02/10/04 (4)
    • Re: Yes, but not quite a bolt on - Martin 23:12:20 02/10/04 (0)
    • Re: Yes, but not quite a bolt on - Martin 23:12:18 02/10/04 (0)
    • Re: Yes, but not quite a bolt on - Martin 23:12:15 02/10/04 (0)
    • Re: Yes, but not quite a bolt on - Martin 23:11:41 02/10/04 (0)
• Any new suspension ideas? - Nick in Folsom, CA... the town, not the prison 10:55:59 02/10/04 (13)
  • Alpina springs would probably be .... - Adam Wilson in Chicago 19:22:40 02/10/04 (2)
    • Alpina setup is quite stiff - Eddie in Toronto 20:20:54 02/10/04 (1)
      • On the Alpina stuff, I can tell you first hand - Blair 20:26:03 02/10/04 (0)
  • Agree with responses, plus other thoughts . . . - Bob/E12/6er 15:33:20 02/10/04 (3)
    • Bob, its 'TOP END performance' link inside - Blair 15:58:00 02/10/04 (2)
      • Jackpot! Now if they would only make that for - Bob/E12/6er 16:14:38 02/10/04 (0)
      • Jackpot! Now if they would only make that for - Bob/E12/6er 16:13:58 02/10/04 (0)
  • Re: Any new suspension ideas? - jim at da shop 11:44:52 02/10/04 (5)
    • anyone make a bolt on rear bar? - ...tom 12:41:57 02/10/04 (0)
    • Re: Any new suspension ideas? - Blair 11:47:16 02/10/04 (3)
      • Re: Any new suspension ideas? - jim at da shop 11:54:36 02/10/04 (0)
      • jeez...my typing sucks today.... - jim at da shop 11:54:11 02/10/04 (0)
      • jeez...my typing sucks today.... - jim at da shop 11:53:41 02/10/04 (0)
• anyone want to help me get a car from SW FL - Steve Haygood 21:20:13 02/09/04 (6)
  • Re: anyone want to help me get a car from SW FL - Jim 19:59:55 02/10/04 (2)
    • my wife would kill me if i bought a green car - Steve Haygood 23:44:46 02/10/04 (1)
      • Re: my wife would kill me if i bought a green car - Jim 18:36:35 02/11/04 (0)
  • where you at? nt - stewart in slc 00:26:22 02/10/04 (1)
    • central Ga - Steve Haygood 09:16:02 02/10/04 (0)
  • it does run and drive ,,89 635 - Steve Haygood 21:21:36 02/09/04 (0)
• Buying e30 - Randy 76/530 20:59:42 02/09/04 (11)
  • But not the same build quality as a Five - Remy Davison 19:27:43 02/11/04 (2)
    • Thanks Remy! eom - Randy 11:05:28 02/12/04 (0)
    • Thanks Remy! eom - Randy 11:04:47 02/12/04 (0)
  • FWIW, I have the M42 in my E36 318iC.... - Brian in Abilene 14:01:18 02/10/04 (0)
  • Ive owned one...(long) - Ryan Bryan 10:08:57 02/10/04 (2)
    • Ryan... - Randy 76/530 17:05:14 02/10/04 (1)
      • Re: Ryan... - Ryan Bryan 19:13:32 02/10/04 (0)
  • Re: Buying e30 - joe 09:10:51 02/10/04 (0)
  • Re: Buying e30 - Troy Rudolph 21:08:58 02/09/04 (2)
    • Yikes! - Randy 76/530 21:31:57 02/09/04 (1)
      • Randy, email me offline (pic) - Adam Wilson in Chicago 21:42:58 02/09/04 (0)
• Tom Masters - Pete 20:08:37 02/09/04 (2)
  • Re: Tom Masters - Tom Masters 11:08:21 02/10/04 (0)
  • Re: Tom Masters - Bob in San Jose 00:19:35 02/10/04 (0)
• what gas to use?? - jerry kingman 19:58:45 02/09/04 (10)
  • Depends - Mike W. 21:47:05 02/10/04 (0)
  • my $0.02 worth... - Ryan Bryan 09:53:51 02/10/04 (0)
  • We High-Compression Australians... - Remy Davison 01:30:45 02/10/04 (0)
  • Re: what gas to use?? - Bill Hynes 22:05:35 02/09/04 (3)
    • 100 vs 93 - Troy Rudolph 22:16:01 02/09/04 (2)
      • all that may be true, but one time i put some> - chrystobal65 07:40:57 02/14/04 (0)
      • Thanks for the input (nt) - Bill Hynes 09:48:03 02/10/04 (0)
  • 93 ... - Troy Rudolph 21:11:29 02/09/04 (0)
  • Your Correct.... - Dan Lafley 20:12:06 02/09/04 (1)
    • Re: Your Correct.... - Canada Karl 06:14:48 02/11/04 (0)
• Gas mileage (longish) - Brian in Abilene 16:48:55 02/09/04 (8)
  • Re: Gas mileage (longish) - Bob Humphrey 22:56:02 02/10/04 (0)
  • Re: Gas mileage - mine is horrible - Brian in Calgary 20:27:47 02/10/04 (0)
  • Re: Gas mileage - mine is horrible - Brian in Calgary 20:26:55 02/10/04 (0)
  • Thats not bad..... - Randy 76/530 20:37:26 02/09/04 (0)
  • Re: Gas mileage (longish) - Mike W. 19:59:54 02/09/04 (0)
  • Re: Gas mileage (longish) - jim at da shop 18:12:25 02/09/04 (0)
  • Gas mileage: 18 City, 25+ Hwy, 2.8 Auto, 120K nt - Tom Masters 18:08:14 02/09/04 (0)
  • Re: Gas mileage (longish) - Steve Dodds 17:13:00 02/09/04 (0)
• Stupid questions! - Dan J 16:35:51 02/09/04 (12)
  • Thanks Ill get back to you all.. - Dan J 21:28:01 02/09/04 (0)
  • No such thing as stupid questions! - Randy 76/530 21:20:30 02/09/04 (0)
  • Re: Stupid questions! - Troy Rudolph 21:01:28 02/09/04 (0)
  • OK GOT SOME PICS!! lol - Dan J 20:10:52 02/09/04 (5)
    • Injection looks like stock L-Jet to me... - Brian in Abilene 20:30:21 02/09/04 (4)
      • I was pretty sure... - Dan J 20:33:07 02/09/04 (3)
        • try this - Peter Florance 21:39:56 02/09/04 (2)
          • Alt Ground - Karl in KS 20:42:46 02/10/04 (0)
          • Connect that wire! - Joel 04:49:03 02/10/04 (0)
  • Re: Stupid questions! - Blair 17:09:56 02/09/04 (0)
  • picture - Peter Florance 16:50:42 02/09/04 (0)
  • Some answers...calling for backup - Brian in Abilene 16:45:05 02/09/04 (0)
• rear sun blinds for e12? - Mark 12:16:35 02/09/04 (2)
  • Re: rear sun blinds for e12? - Dave 03:27:37 02/12/04 (0)
  • the e28 euro cars had this as an option, you... - ...tom 18:10:17 02/09/04 (0)
• Starting problems, Fuel pump? - Joel 04:21:39 02/09/04 (5)
  • Re: Starting problems, Fuel pump? - Joel 04:04:06 02/10/04 (0)
  • Re: Starting problems, Fuel pump? - greghill 09:40:12 02/09/04 (0)
  • Re: Starting problems, Fuel pump? - Jeff (Atl) 07:50:01 02/09/04 (0)
  • Re: Starting problems, Fuel pump? - Brad In Texas 06:46:40 02/09/04 (1)
    • Re: Starting problems, Fuel pump? - ChuckNC 08:06:18 02/09/04 (0)
• What can a guy do to get some speed on a '79 538i - A.Kondor 04:06:43 02/09/04 (6)
  • Timing - Mike W. 15:06:06 02/09/04 (1)
    • CCW - Peter Florance 16:52:25 02/09/04 (0)
  • Re: What can a guy do to get some speed on a '79 538i - Peter Florance 09:11:32 02/09/04 (0)
  • By the way... - A.Kondor 04:11:06 02/09/04 (2)
    • Re: By the way...Where on VI???? - Blair 12:18:34 02/09/04 (0)
    • Re: By the way... - peter mooney 08:04:34 02/09/04 (0)
• Underbody protection - Zolka 01:48:07 02/09/04 (0)
• HELP!! my e12 having problems... - Dan J 18:18:22 02/08/04 (7)
  • Re: HELP!! my e12 having problems... - peter moooney 08:02:29 02/09/04 (0)
  • Re: HELP!! my e12 having problems... - ChuckNC 08:01:48 02/09/04 (0)
  • Could be fuel pump relay - Remy Davison 00:06:31 02/09/04 (0)
  • Re: HELP!! my e12 having problems... - Dan J 22:38:26 02/08/04 (1)
    • Re: HELP!! my e12 having problems... - Mike W. 00:57:46 02/09/04 (0)
  • Re: HELP!! my e12 having problems... - Martin 21:34:14 02/08/04 (0)
  • it could be a lot of things. - Sam Schultz 20:25:49 02/08/04 (0)
• Who here lives in the U.K.? - Jon in Richmond 18:06:17 02/08/04 (2)
  • Re: Who here lives in the U.K.? - Dave 02:29:49 02/11/04 (0)
  • Re: Who here lives in the U.K.? - Steve Dodds 16:59:27 02/09/04 (0)
• More Idle Questions....long - Dan lafley 18:02:58 02/08/04 (2)
  • Re: More Idle Questions....long - peter mooney 19:57:33 02/08/04 (1)
    • I concur - Mike W. 00:49:42 02/09/04 (0)
• pedals/steering - peter mooney 17:17:04 02/08/04 (2)
  • wiring harness removal - ...tom 09:24:22 02/09/04 (1)
    • Re: wiring harness removal - peter mooney 14:49:08 02/09/04 (0)
• Air Flow Sensor Questions (long) - Brad In Texas 16:24:48 02/08/04 (3)
  • Re: Air Flow Sensor Questions (long) - Mike W. 00:41:33 02/09/04 (1)
    • Re: Air Flow Sensor Questions (long) - Brad In Texas 06:37:54 02/09/04 (0)
  • Re: Air Flow Sensor Questions (long) - Troy Rudolph 16:56:46 02/08/04 (0)
• E12 528i 1981 M30 Pistons???????? - Dan 13:38:05 02/08/04 (8)
  • Different pistons - Mike W. 13:45:50 02/08/04 (7)
    • No, different crank - velocewest 11:15:35 02/09/04 (2)
      • Crank and pistons - Mike W. 14:58:24 02/09/04 (1)
        • Right you are - Velocewest 23:03:17 02/09/04 (0)
    • Re: Different pistons - Dan 14:19:35 02/08/04 (3)
      • Piston rings - Mike W. 20:58:30 02/08/04 (2)
        • According to the ETK all 2.8 M30's use the same - Velocewest 23:10:31 02/09/04 (0)
        • Another possible info source - Mike W. 00:35:18 02/09/04 (0)
• diff mount repair finale - chrystobal65 06:36:08 02/08/04 (5)
  • fuel line - ChuckNC 09:43:30 02/08/04 (4)
    • Re: fuel line - Jeff (Atl) 10:28:41 02/08/04 (3)
      • Re: fuel line - Matt B 08:56:00 02/11/04 (0)
      • that's good to know. - ChuckNC 08:10:56 02/09/04 (0)
      • NAPA fuel hose - Peter Florance 11:31:45 02/08/04 (0)
• Renew those cooling hoses! - Remy Davison 02:00:47 02/08/04 (4)
  • Re: Renew those cooling hoses! - Walt Barie 09:41:09 02/09/04 (0)
  • That one is about every 2 years - Mike W. 13:41:56 02/08/04 (0)
  • Re: Renew those cooling hoses! - Chris Hollis 09:08:14 02/08/04 (1)
    • Word from Atlanta is , , ,,,,! - Jeff (Atl) 11:22:57 02/08/04 (0)
• 'Euro' E12 525i FS... - Jeff Olson 21:11:14 02/07/04 (0)
• houston, anyone home? - ...tom 14:01:23 02/07/04 (0)
• post-EGR timing, redux - joe in pdx 13:02:41 02/07/04 (4)
  • Re: post-EGR timing, redux - Martin 23:53:35 02/07/04 (0)
  • Re: post-EGR timing, redux - Mike W. 16:54:53 02/07/04 (2)
    • Re: post-EGR timing, redux - Peter Florance 20:36:12 02/07/04 (1)
      • Re: post-EGR timing, redux - joe in pdx 03:11:18 02/08/04 (0)
• engine bay - peter mooney 12:22:59 02/07/04 (3)
  • Peter... I have lost track.. You have been> - Lars 12:29:44 02/07/04 (2)
    • Re: Peter... I have lost track.. You have been> - peter mooney 20:37:13 02/07/04 (1)
      • Interesting solution... will be interesting - Lars OBG 21:06:26 02/07/04 (0)
• Ignition Tumbler Replacement - Robert Knowlton 11:51:35 02/07/04 (3)
  • Re: Ignition Tumbler Replacement - Kaveman 18:13:13 02/07/04 (1)
    • Here is the text for my 90% done ignition FAQ - Peter C 14:45:21 02/08/04 (0)
  • Sounds like the switch - Mike W. 16:50:50 02/07/04 (0)
• back to work - peter mooney 07:44:41 02/07/04 (3)
  • awesome,I can't wait to the engine in!keep pics - coming marc79 euro635 17:44:17 02/07/04 (0)
  • Re: back to work - Jeff (Atl) 09:36:00 02/07/04 (1)
    • Re: back to work - peter mooney 12:19:34 02/07/04 (0)
• Looking for an opinion.... a little long - Randy 76/530 16:32:47 02/06/04 (13)
  • E28's don't have it but - Mike W. 22:07:00 02/06/04 (1)
    • Actually... - Randy 76/530 13:25:47 02/07/04 (0)
  • Re: Looking for an opinion.... a little long - Pete 21:04:47 02/06/04 (0)
  • I actually installed some on my car after it , , , - Jeff (Atl) 20:54:45 02/06/04 (1)
    • The problem I had... - Randy 76/530 13:29:42 02/07/04 (0)
  • Re: Looking for an opinion.... a little long - Jim 19:54:06 02/06/04 (0)
  • Re: Looking for an opinion.... a little long - Lee Cornett 17:02:26 02/06/04 (4)
    • Lee, Jim, all others who offered ideas - Randy 13:37:06 02/07/04 (3)
      • it's easy - Peter Florance 20:41:05 02/07/04 (0)
      • how about those low-temp aluminum rods? - ...tom 14:04:14 02/07/04 (1)
        • Have seen some pretty spectacular results - Lars... 16:44:51 02/07/04 (0)
  • I've taken mine off...(more) - Brian in Abilene 16:48:27 02/06/04 (1)
    • Thanks...(more) - Randy 76/530 13:40:36 02/07/04 (0)
• 528i ignition conversion - Dan Lafley 03:16:59 02/06/04 (3)
  • Re: 528i ignition conversion - Blair 11:31:38 02/06/04 (2)
    • Re: 528i ignition conversion - Chris Hollis 20:34:51 02/06/04 (1)
      • If anyones interested, I've got parts for it - Mike W. 22:11:41 02/06/04 (0)
• aftermarket ingition w/ indash control for Ljet? - marc79 euro635 22:43:08 02/05/04 (2)
  • Marc, curious what you want to adjust? - Velocewest 10:38:57 02/07/04 (1)
    • I want more power,more advance helps, I know I can - marc79euro635 13:08:50 02/07/04 (0)
• Getting getrag 265 ready..advice plz - Brian in Calgary 22:24:34 02/05/04 (3)
  • Thanks guys...the tech article is great - Brian in Calgary 22:39:02 02/06/04 (0)
  • Good tech article from E9coupe.com - Velocewest 15:09:14 02/06/04 (0)
  • A few things... - Mike W. 23:32:51 02/05/04 (0)
• Anyone have an e12 for sale or an e28 - Rami 16:05:17 02/05/04 (7)
  • Re: Anyone have an e12 for sale or an e28 - Stephen Mort 10:03:20 02/19/04 (0)
  • Re: Anyone have an e12 for sale or an e28 - Jamie Seattle 17:29:41 02/07/04 (0)
  • Re: Anyone have an e12 for sale or an e28 - Jay Neal 16:29:55 02/05/04 (4)
    • Re: Anyone have an e12 for sale or an e28 - Rami 18:40:56 02/05/04 (0)
    • how about an e34 5-speed? - ...tom 18:15:38 02/05/04 (2)
      • Re: how about an e34 5-speed? - Jay Neal 06:52:32 02/06/04 (0)
      • Re: how about an e34 5-speed? - Ryan Bryan 21:40:35 02/05/04 (0)
• e-12 length - Mark in Ohio 13:47:27 02/05/04 (5)
  • Re: e-12 length - JB in Canada 14:46:04 02/05/04 (2)
    • now if....6...turned out to be 9....... :) nm - chrystobal65 06:28:08 02/08/04 (0)
    • Re: e-12 length - Mark in Ohio 19:57:06 02/06/04 (0)
  • for some reason, 186.6 sticks in my mind>> - chrystobal65 14:14:37 02/05/04 (1)
    • Re: for some reason, 186.6 sticks in my mind>> - Mark in Ohio 20:02:36 02/06/04 (0)
• Thanks to Joe Warner and Gavin Arthur - Nick in Folsom, CA... the town, not the prison 13:43:50 02/05/04 (2)
  • congrats man, that's one fabulous E12 - Adam Wilson in Chicago 20:11:35 02/05/04 (0)
  • congratulations Nick, thanks for the interest in - billy in SLO 14:49:07 02/05/04 (0)
• Calling all MegaSquirters - Lou in Denver 10:14:50 02/05/04 (2)
  • Re: Calling all MegaSquirters - medly 13:32:42 02/05/04 (1)
    • TPS info - Jeff C 08:18:07 02/07/04 (0)
• Anyone have a AFM in Brisbane? - Kav in Aus 21:14:16 02/04/04 (0)
• Anyone seen Gavin Arthur's car in person? - Nick D'Agostino 14:31:06 02/04/04 (1)
  • Re: Anyone seen Gavin Arthur's car in person? - PNW-BMW 09:58:54 02/05/04 (0)
• E12 - E28 exterior door trim question - JB in Canada 12:08:34 02/04/04 (2)
  • Re: E12 - E28 exterior door trim question - Ryan Bryan 12:30:41 02/04/04 (1)
    • Re: E12 - E28 exterior door trim question - Bert-Ola 15:00:04 02/04/04 (0)
• you know you're a first fiver when.....> - chrystobal65 11:58:00 02/04/04 (0)
• diff mount repair-> Peter Florance - Zolka 07:11:32 02/04/04 (3)
  • Re: diff mount repair-> Peter Florance - Peter Florance 12:50:15 02/06/04 (0)
  • Re: diff mount repair-> Peter Florance - ChuckNC 09:57:58 02/05/04 (0)
  • He's on vacation... - Jeff C 12:07:49 02/04/04 (0)
• Looking for interior trim piece - Randy 76/530 06:36:10 02/04/04 (11)
  • Randy.. - Jeff C 08:26:43 02/05/04 (1)
    • Jeff... > rather long - Randy 76/530 09:12:50 02/05/04 (0)
  • To further confuse the issue - Bob in San Jose 23:36:33 02/04/04 (0)
  • Re: Looking for interior trim piece - Pete 16:26:15 02/04/04 (0)
  • check this brother (link) - chrystobal65 11:59:39 02/04/04 (2)
    • Thanks he didn't have one but....> - Randy 76/530 13:38:25 02/04/04 (1)
      • yeah, i know both those bro's >> - chrystobal65 14:06:17 02/05/04 (0)
  • Are you sure it isn't the same? - Tulsa Dave 07:31:05 02/04/04 (3)
    • hmmmm - Randy 76/530 10:16:34 02/04/04 (2)
      • The part number I listed above... - Tulsa Dave 13:38:50 02/04/04 (0)
      • Re: hmmmm - Blair 11:44:04 02/04/04 (0)
• Opinions on CR 5spd mated to 3.45 rear end - Jim Davis 22:42:33 02/03/04 (11)
  • Buy the CR... - Lou in Denver 17:10:36 02/04/04 (1)
    • Re: Buy the CR... - Jim Davis 23:05:29 02/05/04 (0)
  • Re: Opinions on CR 5spd mated to 3.45 rear end - Lee Cornett 11:55:05 02/04/04 (0)
  • Re: Opinions on CR 5spd mated to 3.45 rear end - Frank H 09:34:49 02/04/04 (0)
  • Re: Opinions on CR 5spd mated to 3.45 rear end - Russell 07:07:20 02/04/04 (4)
    • Re: Opinions on CR 5spd mated to 3.45 rear end - Canada Karl 08:24:57 02/04/04 (3)
      • well Karl, was your car a - Blair 11:41:55 02/04/04 (2)
        • According to the ... - Troy Rudolph 23:36:39 02/04/04 (1)
          • My '80 has a 3.45:1... - Tulsa Dave 07:02:01 02/05/04 (0)
  • Re: Opinions on CR 5spd mated to 3.45 rear end - Eric Q 00:27:12 02/04/04 (0)
  • Depends, but... - Mike W. 23:11:56 02/03/04 (0)
• What's a good Getrag 265 5 speed OD worth? (nt) - Jim Davis 20:57:59 02/03/04 (5)
  • I sold one last year - Mike W. 23:16:47 02/03/04 (0)
  • Ironically, worth more than a parts car with a - Lars Olbimmerguy 22:39:18 02/03/04 (1)
    • And what a great car it's turned out to be! - T-Raz 14:15:23 02/05/04 (0)
  • paid $650 in '93 for 127k-mile 265 OD (eom) - Troy Rudolph 22:18:37 02/03/04 (1)
    • driveshaft, shifter, xmember included (eom) - Troy Rudolph 23:24:34 02/03/04 (0)
• Solex 4A1 to L-Jetronic conversion - Temka 20:07:18 02/03/04 (4)
  • Technical FAQ - Chris 09:37:47 02/04/04 (2)
    • Re: Technical FAQ - Temka 19:55:00 02/04/04 (1)
      • no you don't need new head - Peter Florance 10:08:45 02/08/04 (0)
  • Re: Solex 4A1 to L-Jetronic conversion - Mike W. 20:26:34 02/03/04 (0)
• 5er Phest Philly - donniej 15:53:30 02/03/04 (9)
  • Re: 5er Phest Philly - Randy Clark 21:06:05 02/06/04 (0)
  • To all who are interested, send me an e-mail... - donniej 08:53:33 02/04/04 (0)
  • Re: 5er Phest Philly - Russell 07:10:10 02/04/04 (0)
  • check that. bill, caravan from NH??? nm - chrystobal65 22:28:17 02/03/04 (2)
    • You going to be going Chris? (nt) - Bill Hynes 14:17:09 02/04/04 (1)
      • yeah it sounds excellent. i should be available >> - chrystobal65 14:17:06 02/05/04 (0)
  • Re: 5er Phest Philly - Rich 19:23:25 02/03/04 (0)
  • Sounds good to me... - Bill Hynes 18:54:33 02/03/04 (1)
    • Lancaster - Greg 06:40:38 02/04/04 (0)
• E12 to M30 Motronic engine conversion..throttle - Jim Wheeler 13:44:12 02/03/04 (2)
  • Call me. - Wietse 23:11:31 02/03/04 (1)
    • me too... - joe 09:13:53 02/04/04 (0)
• Looking for a very clean car - Nick D'Agostino 12:54:49 02/03/04 (0)
• ATF as Power Steering Fluid? - medly 10:19:24 02/03/04 (3)
  • Re: ATF as Power Steering Fluid? - stewart in slc 21:36:17 02/03/04 (0)
  • Re: ATF as Power Steering Fluid? - Jim Hineline 20:09:26 02/03/04 (0)
  • Re: ATF as Power Steering Fluid? - Canada Karl 10:39:41 02/03/04 (0)
• Still have plenty of e12 parts - Jay Neal 06:16:01 02/03/04 (0)
• Turbo m30 engine for L jet injection on ebay - Rami- again 00:30:35 02/03/04 (0)
• Used hood - Jeannie Thellman 22:38:23 02/02/04 (1)
  • Re: Used hood - Mike W. 23:26:12 02/02/04 (0)
• Quick question - Dan Lafley 22:28:10 02/02/04 (2)
  • Re: Quick question - Mark 02:26:31 02/03/04 (1)
    • Also to low an octang (sp) in gas - Sam Schultz 17:42:11 02/03/04 (0)
• Busted turn signal canceller? - Canada Karl 20:39:14 02/02/04 (4)
  • not repairable - Brian in Calgary 20:45:26 02/02/04 (3)
    • Re: not repairable - Canada Karl 21:16:26 02/02/04 (2)
      • Checking in a junkyard - Mike W. 23:30:37 02/02/04 (1)
        • Re: Checking in a junkyard - Canada Karl 09:07:57 02/03/04 (0)
• coolant issues resolved (?) - ChuckNC 16:47:13 02/02/04 (0)
• Engine on ebay - Rami 15:07:14 02/02/04 (0)
• what is the difference...... - Rami 15:00:14 02/02/04 (4)
  • No performance changes. Same drive train >> - Lars Olbimmerguy 17:10:25 02/02/04 (0)
  • "L" for Leather and a bunch of it. nt. - Chris Hollis, Huntsville, AL 16:19:29 02/02/04 (0)
  • Re: what is the difference...... - Jeff C 15:04:42 02/02/04 (1)
    • Re: what is the difference...... - Rami 15:06:42 02/02/04 (0)
• Got a question about D-jet - Blair 14:54:13 02/02/04 (4)
  • Re: Got a question about D-jet - matthewp 00:27:29 02/03/04 (3)
    • yup... - joe 10:21:10 02/03/04 (2)
      • OK, so now the followup, Can I use a map sensor - Blair 10:53:15 02/03/04 (1)
        • resources - joe 22:27:43 02/03/04 (0)
• AFM FAQ - Dan Lafley 13:23:45 02/02/04 (5)
  • Excellent - please do! - Randy 76/530 12:24:29 02/03/04 (0)
  • Absolutely!!! - KSBinVA 15:02:55 02/02/04 (0)
  • Re: AFM FAQ - james 14:26:52 02/02/04 (1)
    • Thats something i want to know - Dan Lafley 14:56:20 02/02/04 (0)
  • Go for it! - Brian in Calgary 13:40:42 02/02/04 (0)
• San Diego Parts avail... - joe 13:20:56 02/02/04 (0)
• paging troy - Peter Florance 11:04:05 02/02/04 (0)
• streeing wheel wobbles - christopher b 06:58:16 02/02/04 (2)
  • If it's the South African E12/8 you're talking of - Remy Davison 00:10:16 02/03/04 (0)
  • Re: streeing wheel wobbles - Bill Hynes 09:12:05 02/02/04 (0)
• OMG those dumb honda civic drivers took it to far. - Rami 00:01:07 02/02/04 (2)
  • well, imitation is the highest form of flattery!nm - chrystobal65 08:32:04 02/03/04 (0)
  • Well.... - Randy 76/530 07:14:30 02/02/04 (0)
• 65-mile drive through the hills (long) - Brian in Abilene 21:20:01 02/01/04 (1)
  • Re: 65-mile drive through the hills (long) - Ryan Bryan 22:12:10 02/01/04 (0)
• who has the E24 vented rear disc setup?? - jerry kingman 19:51:36 02/01/04 (5)
  • Am using 225/50/16 with ET 24. Have 8inch rims - Jeff (Atl) 18:33:49 02/02/04 (0)
  • Re: who has the E24 vented rear disc setup?? - Jim Hineline 17:02:23 02/02/04 (0)
  • Im going for the 635csi brakes ... - Niklas Edlund 05:47:21 02/02/04 (0)
  • Zane's turbo E12 monster has vented rears (nt) - Adam Wilson in Chicago 22:08:42 02/01/04 (0)
  • 205/60 yoko dbs on e34 15" rims - ...tom 21:39:01 02/01/04 (0)
• anyone using Intrax springs?? - jerry kingman 19:35:14 02/01/04 (0)
• Locks - Lee Cornett 14:54:07 02/01/04 (4)
  • The Whole Set-Up? - Dave D 06:27:15 02/02/04 (3)
    • Re: The Whole Set-Up? - Lee Cornett 08:09:38 02/02/04 (2)
      • Re: The Whole Set-Up? - Peter Florance 11:05:17 02/02/04 (1)
        • Re: The Whole Set-Up? - Lee Cornett 14:13:03 02/02/04 (0)
• Car of the Month - February 2004 - Troy Rudolph (Webmaster) 12:50:51 02/01/04 (5)
  • Re: Car of the Month - February 2004 - Cristian in Sydney - Oz 14:54:40 02/02/04 (0)
  • Re: Car of the Month - February 2004 - Robert Knowlton 10:21:39 02/02/04 (2)
    • Re: Car of the Month - February 2004 - Francois Gaignaux 10:42:13 02/14/04 (0)
    • i'll second that. nice, nice car. nm - chrystobal65 08:36:17 02/03/04 (0)
  • Re: Car of the Month - February 2004 - Will Ollison 07:38:42 02/02/04 (0)
• Bleeding the cooling system? - Canada Karl 09:47:57 02/01/04 (1)
  • Re: Bleeding the cooling system? - ChuckNC 10:38:46 02/01/04 (0)
• AFM - Dan Lafley 02:35:57 02/01/04 (2)
  • Re: AFM - Sam Schultz 07:53:31 02/01/04 (0)
  • Re: AFM - Joel 07:01:25 02/01/04 (0)
• Carpet replacement - Lee Cornett 23:13:40 01/31/04 (1)
  • Re: Carpet replacement - Lee Cornett 00:29:52 02/01/04 (0)
• Temporary Heater: I Just might be a Redneck! :-) - Canada Karl 21:54:15 01/31/04 (2)
  • Sometimes you do what you have to do... - Mike W. 23:32:56 01/31/04 (0)
  • How much duct tape did you use? - Tulsa Dave 21:58:19 01/31/04 (0)
• Ingintion switch out and new one willnot install.. - Tom Masters 19:16:45 01/31/04 (6)
  • which part are u replacing?,the key cylinder or - marc79 euro635 14:05:00 02/01/04 (0)
  • Re: Ingintion switch out and new one willnot install.. - Mike W. 13:39:09 02/01/04 (3)
    • Switch in, Finally, BUT..... - Tom Masters 18:25:30 02/01/04 (2)
      • Check the plug - Mike W. 00:15:48 02/02/04 (1)
        • Re: Check the plug - Tom Masters 02:52:54 02/02/04 (0)
  • HELP I thought you guys were here... - Tom Masters 13:24:47 02/01/04 (0)
• 530 Factory Repair manual FS on ebay - Brian in Calgary 18:27:09 01/31/04 (1)
  • Hmmm: Appears as if not all sections are present - Misha 17:36:32 02/02/04 (0)
• shop in Omaha to evaluate 528 - Jim in CO Springs 18:08:03 01/31/04 (2)
  • Re: shop in Omaha to evaluate 528 - Jim 19:59:29 01/31/04 (1)
    • Re: shop in Omaha to evaluate 528 - darius 21:38:37 02/02/04 (0)
• Electrical Help! (New Seats) L O N G - Dave D. 18:05:39 01/31/04 (5)
  • first remove the seats from the base - ...tom 07:33:25 02/01/04 (0)
  • Re: Electrical Help! (New Seats) L O N G - Bob in San Jose 22:31:05 01/31/04 (3)
    • Thanks, Bob! Thanks, Tom... Bob, you win... - Dave D 06:49:15 02/02/04 (2)
      • Re: Thanks, Bob! Thanks, Tom... Bob, you win... - Bob in San jose 13:38:01 02/02/04 (1)
        • Re: Thanks, Bob! Thanks, Tom... Bob, you win... - Dave D 19:36:41 02/02/04 (0)
• cool vintage '02/tii & some 5er's 4 sale: link - chrystobal65 16:40:27 01/31/04 (6)
  • Can't believe 2002 prices! - Remy Davison 00:16:41 02/03/04 (1)
    • having owned them both, there is nothing like> - chrystobal65 22:27:13 02/03/04 (0)
  • Re: cool vintage '02/tii & some 5er's 4 sale: link - Frank H 09:46:49 02/01/04 (1)
    • okay i waxed a bit ecstatic but i'm in N. England> - chrystobal65 10:10:53 02/01/04 (0)
  • Re: cool vintage '02/tii & some 5er's 4 sale: link - Canada Karl 07:23:51 02/01/04 (1)
    • 140 (SAE gross) and 130 Net i believe >> - chrystobal65 10:14:55 02/01/04 (0)
• '78 Euro 2.8L Performance Mods - Nick Slusarczyk 13:38:36 01/31/04 (1)
  • How much do you want to pay? - Mike W. 14:14:39 01/31/04 (0)
• someone down in S. Cal should buy this! - Frank H 08:52:08 01/31/04 (2)
  • Hmmm... 323i + 3.0 Turbo = Hairy B6 clone... - Velocewest 00:40:22 02/01/04 (0)
  • Re: someone down in S. Cal should buy this! - Nick Slusarczyk 13:11:56 01/31/04 (0)
• Where is everyone? - Rami 02:53:08 01/31/04 (8)
  • Board often quite on weekends... Due in part, - Lars Olbimmerguy 12:23:36 01/31/04 (5)
    • Re: Board often quite on weekends... Due in part, - Rami 18:18:25 01/31/04 (3)
      • whoa tiger! - Luke 12:15:56 02/02/04 (0)
      • Nope... I never infer about Other Peoples choices - Lars 22:28:02 01/31/04 (0)
      • Re: Board often quite on weekends... Due in part, - Ryan Bryan 19:00:09 01/31/04 (0)
    • nope...we're busy *WORKING ON* our E12s!!! nm - chrystobal65 16:36:40 01/31/04 (0)
  • Re: Where is everyone? - ChuckNC 11:40:09 01/31/04 (0)
  • Re: Where is everyone? - Chris Hollis 08:46:45 01/31/04 (0)
• on vacation 1/31 - 2/7 - Peter Florance - First Fives Dictator for Life 22:21:28 01/30/04 (0)
• 3.5L (e34) engine swap question - Sam Schultz 21:20:00 01/30/04 (5)
  • Re: 3.5L (e34) engine swap question - Karl in KS 21:51:02 02/03/04 (0)
  • also - Steve Haygood 08:34:05 01/31/04 (0)
  • Re: 3.5L (e34) engine swap question - Troy Rudolph 23:35:28 01/30/04 (2)
    • thanks but there is an oddity or 2 - Sam Schultz 14:48:11 01/31/04 (1)
      • I posted this a while back, but the E28 pan fits.. - Tulsa Dave 15:33:50 01/31/04 (0)
• plastic caps on fuel injectors for what? - tom colitt 12:01:28 01/30/04 (0)
• Another one of those silly heads up about old cars - Jeff C 09:10:27 01/30/04 (4)
  • Only took 20 minutes - Jeff C 18:51:07 01/30/04 (2)
    • Be sure to tape the new hose to the old , , , - Jeff (Atl) 08:47:52 01/31/04 (1)
      • Ditto... - Tulsa Dave 09:37:01 01/31/04 (0)
  • a great reminder .... - Adam Wilson in Chicago 12:51:49 01/30/04 (0)
• More on Xenon light conversions - Al from Oz 06:14:07 01/30/04 (0)
• Commondore Drivers SUCK! - Joel 19:36:46 01/29/04 (1)
  • Re: Commondore Drivers SUCK! - NC Doug 08:43:36 02/04/04 (0)
• anyone have covan.net as an ISP? - Peter Florance - First Fives Dictator for Life 13:22:05 01/29/04 (3)
  • Re: anyone have covan.net as an ISP? - Lou in Denver 14:50:03 01/29/04 (1)
    • thanks! - Peter Florance 16:16:36 01/29/04 (0)
  • make that covad.net (nt) - Peter Florance - First Fives Dictator for Life 13:22:38 01/29/04 (0)
• I see inversion in my future - ChuckNC 12:31:08 01/29/04 (6)
  • Re: I see inversion in my future - Jeff C 09:02:33 01/30/04 (1)
    • yup... - ChuckNC 11:44:53 01/30/04 (0)
  • well... - ChuckNC 16:00:34 01/29/04 (0)
  • What about the dial? My swivel broke, $5 at dealer - Collins 14:16:29 01/29/04 (0)
  • No, but maybe worse - Mike W. 12:39:15 01/29/04 (1)
    • I have Steam, but no leak - medly 13:20:34 01/29/04 (0)
• WTB post '80 oil filter housing!! - Preston in Spokane 11:31:59 01/29/04 (13)
  • Sounds like I need to pull the top bolt filter off - Brian in Abilene 16:46:15 01/29/04 (0)
  • Problem explained!! - Preston in Spokane 15:08:22 01/29/04 (8)
    • Re: Problem explained!! - Randy 18:57:16 01/31/04 (0)
    • Look in your original owners manual - Matt C 20:21:54 01/29/04 (3)
      • Owners manual. Your lucky you still have yours... - Preston in Spokane 00:55:33 01/30/04 (2)
        • Give me your VIN #. - Matt C 06:49:36 01/30/04 (1)
          • Sorry car is 250 mile away in Seattle!!! - Preston in Spokane 10:11:22 01/30/04 (0)
    • Dished washer - Mike W. 16:26:40 01/29/04 (2)
      • I unbolted my coolant tank and have room , , , - Jeff (Atl) 22:57:18 01/29/04 (0)
      • Re: Dished washer - Lou in denver 17:48:03 01/29/04 (0)
  • Re: WTB post '80 oil filter housing!! - Randy 76/530 13:07:51 01/29/04 (0)
  • I've got one - Mike W. 12:35:43 01/29/04 (1)
    • I think Korman sells a spin on, but $$$ - Velocewest 15:40:47 01/29/04 (0)
• Interesting Read... (from e28 roadfly board post) - Lars Olbimmerguy 10:49:40 01/29/04 (14)
  • Re: Interesting Read... (from e28 roadfly board post) - Bill Hynes 11:03:11 01/29/04 (13)
    • Some typical journalistic misinformation.... - Lars 11:22:58 01/29/04 (12)
      • i dunno lars....i think in the U.S. the 528i was> - chrystobal65 12:47:16 01/30/04 (2)
        • DTS... just sold a car titled 78 that was 528i, & - Lars 17:58:42 01/30/04 (1)
          • do you have a copy of 528i vs. grand am? >> - chrystobal65 16:43:08 01/31/04 (0)
      • Re: Some typical journalistic misinformation.... - Damien in Sydney 17:34:23 01/29/04 (2)
        • Welcome, Damien. Seriously. - Remy Davison 07:10:46 01/30/04 (1)
          • Re: Welcome, Damien. Seriously. - Damien in Sydney 01:27:19 02/02/04 (0)
      • Re: Some typical journalistic misinformation.... - Adam Wilson in Chicago 11:53:16 01/29/04 (4)
        • Re: Some typical journalistic misinformation.... - Velocewest 15:46:29 01/29/04 (0)
        • This is actually... - Randy 76/530 13:01:52 01/29/04 (1)
          • R &T voted it 10 best for a changing world '75. nm - chrystobal65 12:56:46 01/30/04 (0)
        • Hope it didn't sound like I was knocking them.. - Lars... 12:10:04 01/29/04 (0)
      • Thats what I thought... - Bill Hynes 11:51:27 01/29/04 (0)
• Right doors and hood in Bronzit, in San Diego? - Collins 10:26:59 01/29/04 (0)
• What's your favorite gear? - Daniel 22:40:02 01/28/04 (6)
  • Wish i could have one.... - Dan Lafley 09:56:36 01/30/04 (0)
  • Wish i could have one.... - Dan Lafley 09:56:36 01/30/04 (0)
  • Re: What's your favorite gear? - Tarazona 16:55:52 01/29/04 (1)
    • Also third, for all the reasons below. Can't wait - Brian in Abilene 20:20:22 01/29/04 (0)
  • Re: What's your favorite gear? - Blair 01:37:25 01/29/04 (1)
    • Re: What's your favorite gear? - Rami 01:49:02 01/29/04 (0)
• Looking for an E12 - 80 or later - Andy 85 M635 22:33:23 01/28/04 (8)
  • Re: Looking for an E12 - 80 or later - ChuckNC 12:27:07 01/29/04 (0)
  • 528i in Orlando - joe 09:23:52 01/29/04 (0)
  • Re: Looking for an E12 - 80 or later - Daniel 22:44:16 01/28/04 (0)
  • hi Andy - Adam Wilson in Chicago 22:39:02 01/28/04 (4)
    • The E12 will be a nice weather daily driver - Andy 85 M635 18:06:02 01/29/04 (0)
    • E12 in slo - Jim 17:42:05 01/29/04 (2)
      • Re: E12 in slo - Bob in San Jose 20:30:09 01/29/04 (0)
      • Re: E12 in slo - Jim 18:37:08 01/29/04 (0)
• Someone who has pulled heater core???? (long) - Canada Karl 16:45:05 01/28/04 (14)
  • Thinking way out of the box here.... - Matt C 07:12:10 01/29/04 (2)
    • Re: Thinking way out of the box here.... - Canada Karl 16:44:05 01/29/04 (1)
      • Heck even if...... - Matt C 20:27:03 01/29/04 (0)
  • A/C holes? (more, and long) - Mike W. 20:32:34 01/28/04 (1)
    • Re: A/C holes? (more, and long) - Canada Karl 20:46:12 01/28/04 (0)
  • Just buy a large down jacket because - Misha 17:31:05 01/28/04 (8)
    • Re: Just buy a large down jacket because - Canada Karl 18:02:23 01/28/04 (7)
      • I still lean toward the down jacket and gloves.... - Misha 12:50:30 01/29/04 (6)
        • but....what about the windows? - Brian in Calgary 18:08:40 01/30/04 (5)
          • Just leave the windows down... - Tulsa Dave 18:52:25 01/30/04 (4)
            • Re: Just leave the windows down... - Canada Karl 05:07:15 01/31/04 (3)
              • Should be just like riding a motorcycle... - Tulsa Dave 09:38:17 01/31/04 (2)
                • Re: Should be just like riding a motorcycle... - Canada Karl 18:45:26 01/31/04 (1)
                  • No where near as cold as you deal with... - Tulsa Dave 21:57:03 01/31/04 (0)
• Peter Florance - Jay Neal 16:19:08 01/28/04 (1)
  • let's talk by phone tomorrow - Peter Florance 22:29:26 01/28/04 (0)
• 3.5L Conversion questions - Brian in Abilene 15:21:02 01/28/04 (5)
  • Re: 3.5L Conversion answers - Peter C 18:29:33 01/28/04 (4)
    • Paint - Mike W. 20:41:32 01/28/04 (0)
    • Thanks, Peter (more) - Brian in Abilene 19:09:38 01/28/04 (2)
      • (more) - Peter C 19:52:10 01/28/04 (1)
        • Thanks once again, Peter, and Mike too. (nt) - Brian in Abilene 21:55:58 01/28/04 (0)
• Power Steering leak - medly 14:22:04 01/28/04 (7)
  • Return hose - Peter C 18:38:45 01/28/04 (0)
  • Re: Power Steering leak - joe 14:43:19 01/28/04 (0)
  • filter? - Peter Florance 14:27:35 01/28/04 (4)
    • new fluid and filter sounds right - medly 00:06:18 01/29/04 (3)
      • Re: new fluid and filter sounds right - Peter Florance 06:15:01 01/29/04 (2)
        • Where are these filters available?? nt - Jeff (Atl) 07:53:00 01/29/04 (1)
          • I ordered them from Max Imports... - Tulsa Dave 11:03:46 01/29/04 (0)
• WTB front spoiler FS oem M5 front valance - 2002sue 13:55:02 01/28/04 (0)
• Tools for e12 tool kit . . . - Tim in NC 13:42:11 01/28/04 (5)
  • Thanks for info. I just ordered complete set . . - Tim in NC 08:57:07 01/29/04 (0)
  • Re: Tools for e12 tool kit . . . - Bob in San Jose 01:56:31 01/29/04 (0)
  • Re: Tools for e12 tool kit . . . - Jay Neal 16:11:45 01/28/04 (0)
  • Re: Tools for e12 tool kit . . . - Tom Masters 14:14:43 01/28/04 (1)
    • Re: Tools for e12 tool kit . . . - Tim in NC 14:50:22 01/28/04 (0)
• e12 parts for sale(more info) - Jay Neal 06:31:26 01/28/04 (0)
• Roadfly Alternatives Patrol... - Robspeed 22:48:11 01/27/04 (10)
  • Ive made a round of changes, pls let me kno ...... - Robspeed 13:05:36 01/28/04 (1)
    • only corrections - Peter Florance - First Fives Dictator for Life 14:32:55 01/28/04 (0)
  • also... - Greg 10:04:11 01/28/04 (3)
    • Re: also... - Frank H 14:30:39 01/28/04 (1)
      • I choose not to use it - Adam Wilson in Chicago 21:45:22 01/28/04 (0)
    • ahhh,,, did not know that!! :) - Robspeed 12:16:47 01/28/04 (0)
  • thanks! one favor - Peter Florance - First Fives Dictator for Life 06:29:49 01/28/04 (1)
    • you got it!! - Robspeed 12:14:36 01/28/04 (0)
  • thanks for the link, I will hold onto it - Adam Wilson in Chicago 22:58:49 01/27/04 (1)
    • magazine for vintage Bimmerphiles... - Robspeed 12:18:55 01/28/04 (0)
• Gas Milage - James 22:25:32 01/27/04 (4)
  • Doesn't sound too far off - Randy 75/530 13:35:06 01/28/04 (0)
  • Re: Gas Milage - Canada Karl 05:26:23 01/28/04 (0)
  • Re: Gas Mileage - Troy Rudolph 22:34:41 01/27/04 (1)
    • Odometer - James 23:34:46 01/27/04 (0)
• More e12 Turbo Fun - Mike in Chicago 16:45:33 01/27/04 (5)
  • Keep it up Mike - Brian in Calgary 22:31:33 01/27/04 (0)
  • Re: More e12 Turbo Fun - TCD 18:07:06 01/27/04 (3)
    • Re: More e12 Turbo Fun - Mike in Chicago 08:52:04 01/28/04 (2)
      • Re: More e12 Turbo Fun - TCD 11:09:16 01/28/04 (1)
        • Re: More e12 Turbo Fun - Mike in Chicago 13:03:50 01/28/04 (0)
• Parting out (1) 1981 528i - Jay Neal 16:02:58 01/27/04 (1)
  • Re: Parting out (1) 1981 528i - Joel 19:19:19 01/29/04 (0)
• Oil filter - Paul 15:33:38 01/27/04 (2)
  • piece of cake - Steve Haygood 21:55:11 01/27/04 (0)
  • Re: Oil filter - Canada Karl 16:01:28 01/27/04 (0)
• Ominous clunk - Brian in Abilene 13:05:52 01/27/04 (10)
  • Re: Ominous clunk - gary larson 16:16:40 02/08/04 (0)
  • It could be ... - Troy Rudolph 22:22:06 01/27/04 (1)
    • Thanks, Troy, I'll look at that, too. I looked at - Brian in Abilene 07:50:06 01/28/04 (0)
  • Same thing happened to me... - Tulsa Dave 14:28:26 01/27/04 (6)
    • That's not what I wanted to hear...(more) - Brian in Abilene 14:35:41 01/27/04 (5)
      • Re: That's not what I wanted to hear...(more) - Peter Florance 18:06:41 01/27/04 (0)
      • Thanks, everyone. I'll give it a go. (nt) - Brian in Abilene 17:10:48 01/27/04 (0)
      • Not that bad - Karl in KS 17:00:25 01/27/04 (0)
      • Re: That's not what I wanted to hear...(more) - james 15:28:00 01/27/04 (1)
        • Ditto... sort of... - Tulsa Dave 16:20:14 01/27/04 (0)
• Water in rear footwell - Steve G 12:12:51 01/27/04 (4)
  • Sunroof alignment - Mike W. 20:58:43 01/27/04 (0)
  • Re: Water in rear footwell - T.Han 16:14:18 01/27/04 (0)
  • Re: Water in rear footwell - Allan A. 13:02:42 01/27/04 (1)
    • Re: Water in rear footwell - james 15:30:01 01/27/04 (0)
• replacing the suspension, what else would you do? - Jason 11:58:28 01/27/04 (6)
  • Swaybar busings and end link bushings (eom) - Troy Rudolph 22:36:54 01/27/04 (0)
  • Re: replacing the suspension, what else would you do? - DMV 14:10:15 01/27/04 (0)
  • bump stops if using stock struts - ...tom 13:32:24 01/27/04 (1)
    • ditto bump stops - Karl in KS 17:04:47 01/27/04 (0)
  • Re: replacing the suspension, what else would you do? - Chris Hollis, Huntsville, AL 12:24:12 01/27/04 (0)
  • Re: replacing the suspension, what else would you do? - Blair 12:16:14 01/27/04 (0)
• The smell of antifreeze in the morning - Medly 11:42:26 01/27/04 (7)
  • How do you like this weather Medly? - Brian in Calgary 22:43:15 01/27/04 (5)
    • I'm going back to BC (nt) - medly 14:55:22 01/28/04 (0)
    • Re: How do you like this weather Medly? - Canada Karl 05:33:22 01/28/04 (3)
      • Not by much Karl... - Brian in Calgary 10:41:21 01/28/04 (2)
        • Re: Not by much Karl...Re:heaters & batteries - Canada Karl 11:42:38 01/28/04 (1)
          • Chinooks in Calgary - Brian in Calgary 16:43:54 01/28/04 (0)
  • Your temperature control switch is failing - Misha 21:02:58 01/27/04 (0)
• late 3.5L swap - joe 11:12:49 01/27/04 (0)
• cold star problem - kitty633csi 08:42:51 01/27/04 (6)
  • THANKS FOR THE HELP GUY'S - kitty633csi 14:10:55 01/28/04 (0)
  • cold start valve is not aux air vavle - Peter Florance 11:21:36 01/27/04 (2)
    • Re: cold start valve is not aux air vavle - Karl in KS 17:10:33 01/27/04 (0)
    • shows what *I* know... - ChuckNC 11:59:29 01/27/04 (0)
  • Re: cold start problem - ChuckNC 09:59:38 01/27/04 (0)
  • Re: cold star problem - kitty633csi 08:44:33 01/27/04 (0)
• Parting out 72' Bavaria - Daniel 00:22:36 01/27/04 (0)
• Regarding past discussions of unmolested original - Lars Olbimmerguy 00:00:41 01/27/04 (4)
  • Re: Regarding past discussions of unmolested original - Jim 21:02:01 01/27/04 (0)
  • WOW!!!!!!! - Blair 12:14:28 01/27/04 (1)
    • Better yet, pay the 18-20k it's worth... - Velocewest 15:59:48 01/27/04 (0)
  • How about that 9600 mile, $13k 528i in So. Cal? - Eric Q 01:11:19 01/27/04 (0)
• So called "rice burners"... - Canada Karl 22:14:41 01/26/04 (6)
  • Re: So called "rice burners"... - Jim 21:12:32 01/27/04 (0)
  • It must be COLD up there in Canada - John in (sunny) Simi Valley, (California) 23:53:23 01/26/04 (4)
    • Carefully...Datsun's can be VERY quick - Eddie in Toronto 08:22:52 01/27/04 (2)
      • my buddys doin the same thing , redtop in a 510 - marc79 euro635 23:35:57 01/27/04 (1)
        • Re: my buddys doin the same thing , redtop in a 510 - Canada Karl 05:38:06 01/28/04 (0)
    • Re: It must be COLD up there in Canada - Rami 00:17:13 01/27/04 (0)
• Intake Backfire - Dan Lafley 19:21:10 01/26/04 (5)
  • Adjust the valves - Mike W. 00:14:09 01/27/04 (4)
    • Valves already done.... - Dan Lafley 00:36:05 01/27/04 (3)
      • Check them again - Mike W. 21:03:23 01/27/04 (0)
      • Check the valve lash, especially if you - Lars OBG 03:20:08 01/27/04 (1)
        • Or, run a compression test and test with a vacuum - Lars OBG 03:24:46 01/27/04 (0)
• Paging Brian in Calgary - Canada Karl 18:48:02 01/26/04 (1)
  • Snow Traction - Brian in Calgary 00:26:07 01/27/04 (0)
• Aux Air Valve ???? - Canada Karl 15:21:01 01/26/04 (1)
  • Re: Aux Air Valve ???? - Blair 17:12:19 01/26/04 (0)
• where can i get a front spoiler - Rami- winnipeg 12:36:46 01/26/04 (5)
  • Top End Performance has one and other E12 stuff... - Jeff Olson 21:38:21 01/26/04 (1)
    • By the way, it's $149 + $15 shipping. More sources... - Jeff Olson 21:44:41 01/26/04 (0)
  • Re: I have the spoiler... - Eduardo Alvarez 14:39:16 01/26/04 (1)
    • Re: I have the spoiler... - Rami 22:31:57 01/26/04 (0)
  • I know of two places - Dan Lafley 13:04:44 01/26/04 (0)
• Where to get Pagid pads? - Nick in Denver 12:18:17 01/26/04 (1)
  • Bavauto carries Pagid. Fronts $40, Rear $33. (nt) - Brian in Abilene 12:36:26 01/26/04 (0)
• -FOR SALE- ALPINA rear trunk spoilers (copies) - jerry kingman 00:59:35 01/26/04 (1)
  • Re: -FOR SALE- ALPINA rear trunk spoilers (copies) - Ryan Bryan 09:12:13 01/26/04 (0)
• FOR SALE 1980 528i (cheap) - jerry kingman 00:49:46 01/26/04 (0)
• Tranny numbers - Bill Bowes 19:04:16 01/25/04 (3)
  • Metric Mech Trans pages 49-57 - Lars OBG 22:52:05 01/25/04 (1)
    • Table for years is page 51 BTW - Lars... 22:53:20 01/25/04 (0)
  • Re: Tranny numbers - jim not at da shop 19:28:05 01/25/04 (0)
• MegaSuirt Peter F Help! - Lou in denver 14:10:53 01/25/04 (3)
  • testing rs232 chip - Peter Florance 19:41:08 01/25/04 (1)
    • Re: testing rs232 chip - Lou in Denver 19:43:57 01/25/04 (0)
  • That's MegaSquirt (nt) - Lou in Denver 14:36:39 01/25/04 (0)
• Will E38 16" wheels fit - Gordon 13:45:27 01/25/04 (2)
  • Re: Will E38 16" wheels fit - Blair 20:02:37 01/25/04 (1)
    • Re: Will E38 16" wheels fit - Gordon 21:35:57 01/25/04 (0)
• Getting rid of US front turnsignals? - Canada Karl 11:18:59 01/25/04 (7)
  • paint job - Karl in KS 21:27:52 01/25/04 (1)
    • Paint job - Randy 76/530 08:50:49 01/26/04 (0)
  • Re: Getting rid of US front turnsignals? - Randy 76/530 17:12:24 01/25/04 (0)
  • I've just checked on this as I'm... - Tulsa Dave 11:27:05 01/25/04 (3)
    • Re: I've just checked on this as I'm... - Blair 17:14:10 01/26/04 (2)
      • Re: I've just checked on this as I'm... - Canada Karl 05:45:40 01/27/04 (0)
      • It would probably look like this... - Tulsa Dave 20:49:02 01/26/04 (0)
• 1200 rpm idle 530i - Canada Karl 10:44:54 01/25/04 (3)
  • Re: 1200 rpm idle 530i - Peter Florance 22:01:14 01/25/04 (2)
    • Re: 1200 rpm idle 530i - Lou in denver 15:16:00 01/26/04 (1)
      • timing maybe - Matt C 18:00:57 01/26/04 (0)
• wed site on spark plugs - gary in west OZ 23:41:01 01/24/04 (0)
• The engine has arrived... - Brian in Abilene 21:18:20 01/24/04 (10)
  • You're gonna love it (nt) - Karl in KS 21:29:52 01/25/04 (0)
  • brian....thank you. - jim not at da shop 13:08:51 01/25/04 (0)
  • Re: questions regarding engine - Mitch Brookhyser 08:17:37 01/25/04 (5)
    • Yes, it's an L-block 3453 out of an 82 633Csi - Brian in Abilene 08:22:59 01/25/04 (4)
      • Re: CR Tranny - joe 11:00:49 01/26/04 (1)
        • Wow. That does seem high. MAybe I'll just stick - Brian in Abilene 11:05:24 01/26/04 (0)
      • Re: Yes, it's an L-block 3453 out of an 82 633Csi - Peter Florance 08:47:29 01/25/04 (1)
        • Jim was kind enough to send EVERYTHING with the - Brian in Abilene 09:11:08 01/25/04 (0)
  • Keep notes on the 3.5 FAQ - Peter C 21:51:27 01/24/04 (1)
    • One thing I can add to the faq... - Tulsa Dave 22:00:21 01/25/04 (0)
• Alpina donor procured - Mitch Brookhyser 21:04:30 01/24/04 (0)
• big brakes - Charles 19:22:20 01/24/04 (8)
  • Im doing the big brake Upgrade ! - Niklas Edlund (in Sweden) 10:03:32 01/28/04 (0)
  • Re: big brakes - Dave 13:39:20 01/27/04 (0)
  • Re: big brakes - Bill Bowes 08:40:26 01/25/04 (0)
  • The e12 is so far superior to the e28 on both>>> - Lars OBG 19:34:18 01/24/04 (4)
    • Really, those non vented fronts on my 530 sucked! - TCD 19:56:56 01/24/04 (3)
      • Sorry... most of my cars have been 80-81 - Lars 23:53:26 01/24/04 (0)
      • True TDC, here is my take....LONG - Blair 20:26:14 01/24/04 (1)
        • Only a True Canadian.... - Brian in Calgary 18:01:03 01/25/04 (0)
• tps makes no difference? looking under the hood - marc79 euro635 18:15:53 01/24/04 (1)
  • on our version Ljet - Peter Florance 18:46:38 01/24/04 (0)
• pics of the e12 as suggested..... - autobahnjim 15:23:16 01/24/04 (1)
  • 80 528i.................sold!!!!!!! - jim not at da shop 23:56:23 01/24/04 (0)
• Will wheels fit? - Steve Dodds 12:47:04 01/24/04 (6)
  • even if they don't... - ChuckNC 17:31:56 01/24/04 (0)
  • Re: Will wheels fit? - Ryan Bryan 14:57:39 01/24/04 (1)
    • Re: Will wheels fit? - Steve Dodds 15:18:44 01/24/04 (0)
  • Actually, some 3 series wheels 47mm offset>>> - Lars 14:42:38 01/24/04 (0)
  • probably not as the offset is too great, - ...tom 13:24:39 01/24/04 (1)
    • Re: probably not as the offset is too great, - Steve Dodds 14:36:03 01/24/04 (0)
• Pictures of Rear Shock Mounts - Brian in Calgary 23:49:28 01/23/04 (4)
  • Re: Pictures of Rear Shock Mounts - stewart in SLC 03:15:23 01/24/04 (3)
    • should have called me! Craig SLC - Craig Day 21:53:42 01/24/04 (0)
    • should have called me! Craig SLC - Craig Day 21:52:07 01/24/04 (1)
      • Thanks anyhow... - Brian in Calgary 16:19:44 01/25/04 (0)
• Pictures of Spring Perch Install - Brian in Calgary 23:34:23 01/23/04 (1)
  • Here's the reason I changed the shocks - Brian in Calgary 23:55:14 01/23/04 (0)
• Paging Thomas Marino... - DJazz~ 19:58:46 01/23/04 (0)
• Stiff front door locks - any cure? - Peter C 17:48:51 01/23/04 (3)
  • Re: Stiff front door locks - any cure? - Mike W. 20:55:25 01/23/04 (0)
  • Re: Stiff front door locks - any cure? - CanadaKarl 17:56:57 01/23/04 (1)
    • Lube, lube, lube - Brian in Calgary 18:12:26 01/23/04 (0)
• E21 intake runners - Allert 17:25:54 01/23/04 (4)
  • Re: E21 intake runners - Peter Florance - First Fives Dictator for Life 11:46:36 01/24/04 (0)
  • Check the FAQ should outline whole thing (nt) - Brian in Calgary 18:13:30 01/23/04 (2)
    • Re: Check the FAQ should outline whole thing (nt) - Allert 02:07:07 01/24/04 (1)
      • Re: Check the FAQ should outline whole thing (nt) - CanadaKarl 05:54:16 01/24/04 (0)
• Odd bumper question? - Canada Karl 16:49:51 01/23/04 (7)
  • Just checked a spare bumper I have in shop>> - Lars Olbimmerguy 11:54:47 01/24/04 (3)
    • PS. That IS the monster North American Bumper??? - Lars 11:56:15 01/24/04 (2)
      • Re: PS. That IS the monster North American Bumper??? - Canada Karl 13:53:44 01/24/04 (1)
        • I recollect that IF you have all the brackets,>> - Lars 14:15:18 01/24/04 (0)
  • Re: Odd bumper question? - Bob Iverach 19:46:07 01/23/04 (2)
    • Re: Odd bumper question? - Canada Karl 02:11:02 01/24/04 (0)
    • Re: Odd bumper question? - Canada Karl 02:10:39 01/24/04 (0)
• Free to good home s.f bay area - 2002sue 16:00:37 01/23/04 (1)
  • AAAAH! Why is all the good stuff too far away... - Velocewest 18:50:39 01/23/04 (0)
• difference btwn manual and electric sunroof cables - ...tom 14:55:04 01/23/04 (2)
  • my experience (long) - stewart in slc 03:22:37 01/24/04 (0)
  • Re: difference btwn manual and electric sunroof cables - Mike W. 20:35:46 01/23/04 (0)
• Computer diagnosis connector - Dan Lafley 13:44:55 01/23/04 (1)
  • Re: Computer diagnosis connector - Karl in KS 21:43:45 01/25/04 (0)
• Headlights? - Troy Rudolph 13:07:37 01/23/04 (9)
  • Re: Headlights? - Bob Humphrey 18:50:08 01/26/04 (0)
  • I've got some! (long, but hopefully usefull) - Nick in Denver 13:37:14 01/24/04 (0)
  • Look like fakes to me - Mike W. 20:47:57 01/23/04 (0)
  • Re: Headlights? - Velocewest 16:28:08 01/23/04 (0)
  • A couple of questions for the seller - Misha 15:28:14 01/23/04 (0)
  • What about regular H1/H4 conversions? - Brian in Abilene 13:57:34 01/23/04 (1)
    • Re: What about regular H1/H4 conversions? - Velocewest 16:13:01 01/23/04 (0)
  • Re: Headlights? - Tom Masters 13:24:24 01/23/04 (1)
    • Re: Headlights? - Bob in San Jose 12:00:38 01/24/04 (0)
• still want to sell my e12......:( - jim at da shop 11:41:58 01/23/04 (1)
  • Dude.. listen.. - Pete 17:30:37 01/23/04 (0)
• Anyone in California - Canada Karl 10:22:05 01/23/04 (6)
  • 93063 - John in Simi Valley, California 12:50:14 01/24/04 (0)
  • SF = 94100, LA = 92000, BH's = 92010, nt - Peter C 17:53:42 01/23/04 (1)
    • Peter, it's LA=90200, BH=90210 - Eric Q 19:26:33 01/23/04 (0)
  • Re: Anyone in California - John in Antioch 15:39:55 01/23/04 (0)
  • Re: Anyone in California - Jim Hineline 10:26:10 01/23/04 (1)
    • Thanks Californians :-) nt - Canada Karl 15:54:56 01/23/04 (0)
• Fear not my friends.... - Brian in Calgary 23:28:43 01/22/04 (6)
  • hehe .... nice job - Adam Wilson in Chicago 06:56:45 01/23/04 (5)
    • E12 Disease. - Brian in Calgary 08:44:18 01/23/04 (4)
      • As disease progresses, wife will be begging>>> - Lars Cousineau 11:22:15 01/23/04 (0)
      • Re: E12 Disease. - Medly 10:12:55 01/23/04 (2)
        • Rear Spoiler - Brian in Calgary 13:11:01 01/23/04 (1)
          • Re: Rear Spoiler - Medly 13:35:45 01/23/04 (0)
• Paging all Calgary Fivers - Brian in Calgary 23:24:41 01/22/04 (3)
  • Re: Paging all Calgary Fivers - Derek 14:10:24 01/23/04 (0)
  • nooooooooo - Medly 23:56:17 01/22/04 (1)
    • Ooops....too late - Brian in Calgary 08:49:37 01/23/04 (0)
• Will seats from a 630 fit in '81 528i? - Brian in Calgary 23:20:26 01/22/04 (4)
  • Nope... won't sit high enough - Lars OBG 00:03:24 01/23/04 (3)
    • Re: Nope... won't sit high enough - Bob Iverach 19:51:29 01/23/04 (1)
      • no good for me then at 5'8 - Brian in Calgary 18:08:47 01/25/04 (0)
    • Dang it....too bad Thanks Lars. (nt) - Brian in Calgary 08:50:39 01/23/04 (0)
• Cam Oiler Tube help! - Eric 21:11:58 01/22/04 (5)
  • service the car regularly - Nick 15:50:21 01/23/04 (0)
  • Locktite! - Mike W. 23:59:50 01/22/04 (0)
  • Re: Cam Oiler Tube help! - ChuckNC 21:33:40 01/22/04 (1)
    • Re: Cam Oiler Tube help! - Eric 12:16:54 01/24/04 (0)
  • new style of bolt is the solution - ...tom 21:23:15 01/22/04 (0)
• e12 Header on eBay - Wietse 20:20:33 01/22/04 (2)
  • Re: e12 Header on eBay - joe 10:19:27 01/23/04 (1)
    • It will fit, but ... - Troy Rudolph 12:34:38 01/23/04 (0)
• 5er fest 2004? - Bill Hynes 18:31:06 01/22/04 (1)
  • Re: 5er fest 2004? - jim not at da shop 21:30:13 01/22/04 (0)
• not much interest in the "beast" yet, - billy in SLO 15:34:48 01/22/04 (5)
  • Re: not much interest in the "beast" yet, - T.Han 23:18:12 01/22/04 (4)
    • fr. is from BavAuto, rr is from Kavman and - billy in SLO 12:14:36 01/23/04 (2)
      • Re: fr. is from BavAuto, rr is from Kavman and - T.Han 15:59:29 01/23/04 (1)
        • only have one, but like i said i wish i had the $> - chrystobal65 11:57:47 01/24/04 (0)
    • Well said... - Tulsa Dave 07:26:56 01/23/04 (0)
• vented rear disc/calipers anyone..? - jim at da shop 15:21:36 01/22/04 (0)
• Test - ChuckNC 12:11:18 01/22/04 (4)
  • Eureka, Pacoima, and Cucamonga! - Chuck Denson 12:13:26 01/22/04 (3)
    • good - Chris Hollis, Huntsville, AL 13:39:39 01/22/04 (2)
      • In the words of the Boss: - ChuckNC 21:50:22 01/22/04 (1)
        • "Rosalita" , , , what do I win ?? - Jeff (Atl) 21:59:36 01/22/04 (0)
• m3csl @ the ring, check this out ! - marc79 euro635 22:17:35 01/21/04 (8)
  • Re: m3csl @ the ring, check this out ! - Jim 19:55:18 01/22/04 (0)
  • Excellent! - Misha 18:50:06 01/22/04 (0)
  • Re: m3csl @ the ring, check this out ! - matthewp 17:58:19 01/22/04 (0)
  • Re: m3csl @ the ring, check this out ! - Joel 07:43:52 01/22/04 (3)
    • New M5 & M6 due 2005ish - Nick in Denver 09:12:54 01/22/04 (2)
      • Pre-production engine power... - Eddie 12:20:50 01/22/04 (1)
        • Yikes almost 600hp? - Nick in Denver 14:29:31 01/22/04 (0)
  • Re: m3csl @ the ring, check this out ! - Lee Cornett 22:37:13 01/21/04 (0)
• Going back to Lebanon "rich in e12 parts and cheap - Rami 17:44:55 01/21/04 (4)
  • Re: Going back to Lebanon "rich in e12 parts and cheap - Canada Karl 20:14:28 01/21/04 (3)
    • Re: Going back to Lebanon "rich in e12 parts and cheap - Rami 23:15:19 01/21/04 (2)
      • Re: Going back to Lebanon "rich in e12 parts and cheap - Canda Karl 00:51:43 01/22/04 (1)
        • Re: Going back to Lebanon "rich in e12 parts and cheap - Rami 13:15:37 01/22/04 (0)
• e12 on ebay - Rami-winnipeg 17:38:49 01/21/04 (3)
  • Re: e12 on ebay - Ryan Bryan 19:21:16 01/21/04 (2)
    • Re: e12 on ebay - Blair 19:59:12 01/21/04 (1)
      • Re: e12 on ebay - T.Han 22:20:26 01/21/04 (0)
• Paging Troy Rudolph....How to post pics - Brian in Calgary 17:38:28 01/21/04 (10)
  • Click the FAQ link at the top of this page (eom) - Troy Rudolph 21:19:08 01/21/04 (8)
    • I read the FAQ but, how do I get it to .... - Brian in Calgary 21:34:33 01/21/04 (7)
      • You can't. - Troy Rudolph 21:38:50 01/21/04 (6)
        • But, ... - Troy Rudolph 21:51:53 01/21/04 (5)
          • thanks...will try that (nt) - Brian in Calgary 00:53:17 01/22/04 (4)
            • Picture Test - Brian in Calgary 22:53:20 01/23/04 (3)
              • Re: Picture Test2 - brian 22:54:25 01/23/04 (2)
                • Re: Picture Test3 - brian 23:31:13 01/23/04 (0)
                • Re: Picture Test3 - brian 22:57:45 01/23/04 (0)
• Bilstein Spring Perch ...SOLVED!! - Brian in Calgary 17:37:07 01/21/04 (2)
  • I went through this with a set of KYBs... - Tulsa Dave 18:45:52 01/21/04 (1)
    • Would have been easier with the flat perch.. - Brian in Calgary 21:16:37 01/21/04 (0)
• Euro e12 on the bay went for $3600.00 - Bob in San Jose 12:57:37 01/21/04 (3)
  • might want to check mye28 message board - Adam Wilson in Chicago 13:12:30 01/21/04 (2)
    • also, it used to be an auto.....NT - Blair 14:32:12 01/21/04 (1)
      • it is cool. but billy here is selling his E12> - chrystobal65 12:24:25 01/22/04 (0)
• Tan Carpet pieces needed - Lee Cornett 09:42:50 01/21/04 (2)
  • Re: Tan Carpet pieces needed - Tom Masters 12:17:16 01/21/04 (1)
    • Re: Tan Carpet pieces needed - Lee Cornett 12:46:29 01/21/04 (0)
• Unstable idle - Dan Lafley 01:06:09 01/21/04 (1)
  • Re: Unstable idle - T.Han 22:13:11 01/21/04 (0)
• Megasquirt Questions - Peter Florance - Medly 00:36:55 01/21/04 (7)
  • Re: Megasquirt Questions - Peter Florance - Peter Florance 05:53:36 01/21/04 (6)
    • Paging - Peter Florance - Lou in Denver 14:16:12 01/21/04 (0)
    • Thanks Peter, i'll check the wrecking yards. (nt) - Medly 10:14:48 01/21/04 (0)
    • dumb question - Adam Wilson in Chicago 09:33:17 01/21/04 (1)
      • Re: dumb question - Peter Florance 10:35:47 01/21/04 (0)
    • Any luck with FCI - Lou in Denver 09:26:17 01/21/04 (0)
    • oh yeah mileage sucks - Peter Florance 05:54:47 01/21/04 (0)
• Interior re-assembly help needed - Lee Cornett 19:42:40 01/20/04 (2)
  • Re: Interior re-assembly help needed - T.Han 22:22:48 01/21/04 (1)
    • Re: Interior re-assembly help needed - Lee Cornett 02:36:02 01/22/04 (0)
• My kid blew up his 5SP...... - Bill Bowes 18:33:59 01/20/04 (0)
• Filling Rad and Air bleed and Air in the System?? - Canada Karl 11:53:20 01/20/04 (5)
  • Re: Filling Rad and Air bleed and Air in the System?? - Ryan Bryan 08:32:23 01/21/04 (0)
  • Got mine out with pair of Vise Grips - Brian in Calgary 08:22:52 01/21/04 (0)
  • Heat the housing around the screw. - Matt C 00:12:52 01/21/04 (0)
  • Welding the bleed screw (image) - Peter Florance 20:47:22 01/20/04 (0)
  • Re: Filling Rad and Air bleed and Air in the System?? - Brad In Texas 12:24:28 01/20/04 (0)
• e12 B7 Turbo parts - Mitch Brookhyser 11:11:19 01/20/04 (7)
  • Re: e12 B7 Turbo parts - Robert Holly 08:15:48 01/21/04 (1)
    • Re: e12 B7 Turbo parts - Mitch Brookhyser 20:44:20 01/24/04 (0)
  • Re: e12 B7 Turbo parts - Frank H 15:52:10 01/20/04 (0)
  • I know someone with a spare manifold. - TCD 13:52:46 01/20/04 (1)
    • Re: I know someone with a spare manifold. - Mitch Brookhyser 20:46:33 01/24/04 (0)
  • Are you in touch with Turbo Charging Dynamics - Lars Olbimmerguy 12:35:22 01/20/04 (1)
    • Re: Are you in touch with Turbo Charging Dynamics - Mitch Brookhyser 20:47:27 01/24/04 (0)
• Visit to Chicago - Mitch Brookhyser 11:07:15 01/20/04 (4)
  • Adam's da man... - Ryan Bryan 11:44:23 01/20/04 (0)
  • Excellent ..... - Adam Wilson in Chicago 11:38:26 01/20/04 (2)
    • Re: Excellent ..... - Brian in Calgary 08:45:02 01/21/04 (0)
    • Sorry I Missed you guys! (nt) - Mike in Chicago 15:06:54 01/20/04 (0)
• has anyone shipped/recieved a hood? - Ryan Bryan 09:21:59 01/20/04 (9)
  • never done it, but, - ChuckNC 13:23:20 01/20/04 (1)
    • Total agreement. My thoughts as well. - Lars OBG 14:16:19 01/20/04 (0)
  • Re: has anyone shipped/recieved a hood? - Randy 76/530 11:20:26 01/20/04 (0)
  • Frank Haas has, and it's an ordeal - Adam Wilson in Chicago 10:18:48 01/20/04 (2)
    • Re: Frank Haas has, and it's an ordeal - Frank H 15:53:25 01/20/04 (0)
    • ahhhh...just what I needed to know.... - Ryan Bryan 10:37:47 01/20/04 (0)
  • Check Amtrak- rates online - Lars Olbimmerguy 09:57:45 01/20/04 (2)
    • Re: Check Amtrak- rates online - Red 14:32:26 02/07/04 (0)
    • Re: Check Amtrak- rates online - Clarine M. Olsen 14:43:00 02/01/04 (0)
• tale of two euros - ...tom 08:14:02 01/20/04 (3)
  • Re: tale of two euros - Niklas Edlund 11:30:46 01/20/04 (2)
    • listed as non-cat 3.5 liter - ...tom 17:59:43 01/20/04 (1)
      • Re: listed as non-cat 3.5 liter - Niklas Edlund 06:35:46 01/22/04 (0)
• diff mount repair - Zolka 08:11:38 01/20/04 (3)
  • I can check - Peter Florance 08:24:24 01/20/04 (2)
    • Thanks... have a nice weekend! - Zolka 05:52:41 01/23/04 (0)
    • I would also like that information , , , thanks. - Jeff (Atl) 22:49:08 01/20/04 (0)
• brake problem - Peter 02:53:52 01/20/04 (8)
  • Re: brake problem - Joel 07:48:05 01/20/04 (5)
    • It's the clutch master cylinder! - Troy Rudolph 08:33:32 01/20/04 (4)
      • Re: It's the clutch master cylinder! - Joel 23:37:13 01/20/04 (3)
        • Sorry ... - Troy Rudolph 13:16:36 01/21/04 (0)
        • Buy a new one!!! - Brian in Calgary 08:50:03 01/21/04 (0)
        • didn't we go through this before? (more) - Peter Florance 06:05:38 01/21/04 (0)
  • master cylinder - Peter Florance 05:53:55 01/20/04 (1)
    • yup - Karl in KS 11:53:24 01/20/04 (0)
• urgent: need good welder in NH for rear diff>> - chrystobal65 00:20:13 01/20/04 (4)
  • Re: urgent: need good welder in NH for rear diff>> - Peter Florance 06:19:54 01/20/04 (3)
    • cool. whaddya think, $100.00 fair??? nm - chrystobal65 11:07:49 01/20/04 (2)
      • yeah - Peter Florance 12:42:59 01/20/04 (1)
        • yeah, mine's not totally ripped apart. nm - chrystobal65 13:47:47 01/20/04 (0)
• OT, badass old Merc (pictures) - Adam Wilson in Chicago 23:26:42 01/19/04 (6)
  • Re: OT, badass old Merc (pictures) - Joel 23:44:10 01/19/04 (5)
    • okay, the 300 SEL 6.3 = one fine car. >> - chrystobal65 00:15:37 01/20/04 (4)
      • Re: okay, the 300 SEL 6.3 = one fine car. >> - Blair 02:15:52 01/20/04 (3)
        • Nice, but I want a 600 SWB Pullman - Eric Q 14:14:53 01/20/04 (2)
          • oh, i'm a fan of *THAT* too!! nm - chrystobal65 20:42:01 01/20/04 (0)
          • link doesn't work (nt) - Adam Wilson in Chicago 14:40:19 01/20/04 (0)
• 3.5 upgrade - Cameron 23:26:24 01/19/04 (1)
  • Yes! - Troy Rudolph 00:05:08 01/20/04 (0)
• 5-speed on eBay - Troy Rudolph 22:39:35 01/19/04 (0)
• My Engine Is On the Way - Jim Davis 21:41:32 01/19/04 (5)
  • Did you get the Euro or is this standard 3.5 - Misha 14:15:10 01/20/04 (1)
    • Mine is a low-mileage Euro. - Brian in Abilene 15:24:51 01/20/04 (0)
  • Don't grab mine by mistake... - Brian in Abilene 21:44:25 01/19/04 (2)
    • Re: Don't grab mine by mistake... - Jim Davis 22:31:47 01/19/04 (1)
      • I probably won't get there until Saturday - Brian in Abilene 07:41:55 01/20/04 (0)
• Anyone ever seen this 528i before? - John in NH 21:40:09 01/19/04 (2)
  • Re: Anyone ever seen this 528i before? - robert knowlton 12:24:52 01/20/04 (0)
  • not again!! >> - chrystobal65 00:24:43 01/20/04 (0)
• just found out what idling probs are - Daniel 21:38:14 01/19/04 (0)
• thanks rexmo for engine measurement... - Robspeed 19:41:03 01/19/04 (2)
  • Which transmission? - Troy Rudolph 20:20:33 01/19/04 (0)
  • Re: thanks rexmo for engine measurement... - Jim 19:55:42 01/19/04 (0)
• "numbers matching" cars - Adam Wilson in Chicago 17:01:03 01/19/04 (4)
  • Re: "numbers matching" cars - Frank H 15:50:15 01/20/04 (0)
  • Re: "numbers matching" cars - Troy Rudolph 21:08:04 01/19/04 (1)
    • Re: "numbers matching" cars - Jim 22:44:06 01/19/04 (0)
  • Re: "numbers matching" cars - Jim 20:20:51 01/19/04 (0)
• 5 speed upgrade anyone..? - autobahnjim 15:56:37 01/19/04 (0)
• Site Update - Troy Rudolph 12:12:57 01/19/04 (6)
  • My Name ... something went wrong !? - Niklas Edlund 02:45:03 01/20/04 (0)
  • Re: Site Update - John from Antioch 17:38:56 01/19/04 (0)
  • Re: Site Update - Greg 14:33:47 01/19/04 (0)
  • I know you just did work to it .... - Adam Wilson in Chicago 13:53:20 01/19/04 (2)
    • Sure, what's Dave's real name? (eom) - Troy Rudolph 15:08:11 01/19/04 (1)
      • Re: Sure, what's Dave's real name? (eom) - Tulsa Dave (aka: Dave Spencer) 15:21:38 01/19/04 (0)
• Random disconnected wire - Brian in Abilene 10:06:14 01/19/04 (4)
  • trunk light - Karl in KS 21:32:07 01/19/04 (1)
    • That's the one I'm looking at! Rats... - Brian in Abilene 21:56:06 01/19/04 (0)
  • Re: Random disconnected wire - ...tom 10:15:35 01/19/04 (1)
    • Thanks, Tom....that'll be the pm project (eom) - Brian in Abilene 10:54:49 01/19/04 (0)
• Battery Problems - NC Doug 09:22:26 01/19/04 (4)
  • Re: Battery Problems - Tom in NY 12:27:31 01/19/04 (0)
  • Re: Battery Problems - chrystobal65 11:51:21 01/19/04 (0)
  • Check the alternator belt tightness. (eom) - Troy Rudolph 10:19:45 01/19/04 (0)
  • Time to check those grounds... - Tulsa Dave 09:34:24 01/19/04 (0)
• clutch - Gary in West OZ 00:53:30 01/19/04 (4)
  • Re: clutch - Peter C 12:20:23 01/19/04 (3)
    • Re: clutch - gary in West Oz 21:51:54 01/20/04 (2)
      • Is your car RHD ? - Peter C 21:48:31 01/24/04 (1)
        • Re: RHD car- clutch cylinders replaced? - GAry in West OZ 00:42:22 01/25/04 (0)
• 528i transistor type.... - Dan Lafley 00:42:23 01/19/04 (2)
  • Re: 528i transistor type.... - Chris Hollis 07:30:41 01/19/04 (1)
    • '79-'81 ignitions are the same (eom) - Troy Rudolph 09:43:35 01/19/04 (0)
• I broke a mounting bolt on .... - Brian in Calgary 22:07:28 01/18/04 (11)
  • Here is my thinking.. - Chris Hollis, Huntsville, AL 09:37:48 01/19/04 (0)
  • Re: I broke a mounting bolt on .... - Lou in Denver 09:09:32 01/19/04 (0)
  • spring perch info - stewart in slc 05:00:23 01/19/04 (0)
  • I'm almost sure - Mike W. 23:00:47 01/18/04 (0)
  • had to fix it twice (more) kinda long - stewart in slc 22:43:07 01/18/04 (0)
  • this may just be gut feeling - Adam Wilson in Chicago 22:15:56 01/18/04 (5)
    • Not the answer I wanted - Brian in Calgary 23:10:00 01/18/04 (4)
      • Re: Just drive it. - Mike in Chicago 09:08:22 01/19/04 (3)
        • I removed the old ones.... - Brian in Calgary 14:24:48 01/19/04 (2)
          • If you don't find one.... - Lou in Denver 09:37:24 01/20/04 (1)
            • Thanks..Will let you know if I need one (nt) - Brian in Calgary 08:51:23 01/21/04 (0)
• Toe in on rear tires? - Canada Karl 20:40:47 01/18/04 (2)
  • Re: Toe in on rear tires? - Karl in KS 21:49:49 01/19/04 (0)
  • Re: Toe in on rear tires? - Steve Haygood 08:46:48 01/19/04 (0)
• paging brian in calgary - Rami 15:55:05 01/18/04 (1)
  • will do...chat me when you see me there..(nt) - Brian in Calgary 22:08:18 01/18/04 (0)
• euro accelerator cable assembly - ...tom 14:57:40 01/18/04 (0)
• Head replacement - specific question - Mark Schuurman 08:46:22 01/18/04 (11)
  • All the info - Thanks - Mark Schuurman 15:30:51 01/19/04 (0)
  • AMC heads may also work - ...tom 08:27:40 01/19/04 (0)
  • isn't this a M20 engine? - ...tom 19:19:48 01/18/04 (7)
    • Re: isn't this a M20 engine? - Troy Rudolph 23:05:29 01/18/04 (0)
    • Re: isn't this a M20 engine? - Frank H 19:30:26 01/18/04 (5)
      • Any M30 head - Mark Schuurman 23:44:47 01/18/04 (4)
        • Read this, please! - Troy Rudolph 23:56:02 01/18/04 (0)
        • It is a M20 - Mark Schuurman 23:51:29 01/18/04 (2)
          • Nope! It is an M30. - Troy Rudolph 23:59:21 01/18/04 (1)
            • e28 525i was also M30 - Mark 03:10:11 01/19/04 (0)
  • Re: Head replacement - specific question - Peter Florance 17:38:56 01/18/04 (0)
• clutch not right - gary in west OZ 04:00:07 01/18/04 (0)
• Rear Shock Install HELP - Brian in Calgary 23:36:19 01/17/04 (6)
  • You've got mail! - Brian in Abilene 08:58:47 01/18/04 (5)
    • Thanks Brian...helped alot (nt) - Brian in Calgary 22:02:51 01/18/04 (4)
      • Anytime. Nice to chat, if briefly. (nt) - Brian in Abilene 23:12:40 01/18/04 (3)
        • Apologize for being so brief..... - Brian in Calgary 14:39:17 01/19/04 (2)
          • Oops...didn't mean to imply that you were brief... - Brian in Abilene 15:47:20 01/19/04 (1)
            • No Worries..Chat with you soon (nt) - Brian in Calgary 08:30:13 01/20/04 (0)
• upgraded cam for 3.5L conversion 284 VS 300 - Sam Schultz 21:45:58 01/17/04 (4)
  • Re: upgraded cam for 3.5L conversion 284 VS 300 - Frank H 14:03:09 01/18/04 (0)
  • I had a 300 cam in my e12.... - TCD 11:41:29 01/18/04 (0)
  • Re: upgraded cam for 3.5L conversion 284 VS 300 - jim at da shop ( fka newguyinold5er ) 21:49:22 01/17/04 (1)
    • I need accual numbers not I think, not to be rude - Sam 22:01:03 01/17/04 (0)
• Pass side mirror & stuff avail. - joe 20:45:04 01/17/04 (3)
  • Got a mirror for ya - Craig Day 11:29:07 01/19/04 (2)
    • Re: Got a mirror for ya - Rich in SF 19:21:46 01/19/04 (1)
      • Re: Got a mirror for ya - Blair 02:22:47 01/20/04 (0)
• No more floaty Cadillac feeling - Brian in Abilene 20:45:02 01/17/04 (8)
  • Brake Master Cylinder - Brian in Calgary 22:54:22 01/17/04 (5)
    • I was thinking that it might be that I simply - Brian in Abilene 08:49:23 01/18/04 (4)
      • no that's typical. - Peter Florance 09:54:13 01/18/04 (3)
        • Exactly what I had happen... - Tulsa Dave 10:20:57 01/18/04 (2)
          • Re: Exactly what I had happen...DITTO to me (nt) - Brian in Calgary 22:14:07 01/18/04 (0)
          • Note to self..I'll keep an eye out. Thanks! (eom) - Brian in Abilene 10:37:51 01/18/04 (0)
  • Brian, I've told this story dozens of times before - Lars OBG 21:54:27 01/17/04 (0)
  • Re: No more floaty Cadillac feeling - jim at da shop ( fka newguyinold5er ) 21:45:21 01/17/04 (0)
• Another No Rust Straight Central Oregon Find.... - Lars Olbimmerguy 18:11:45 01/17/04 (2)
  • Re: Another No Rust Straight Central Oregon Find.... - Mark Zuspan 10:48:49 01/18/04 (0)
  • Ads in classifieds.. May assist. - Lars OBG 18:49:58 01/17/04 (0)
• '77 530i FS in Calgary - Brian in Calgary 16:31:54 01/17/04 (2)
  • Re: '77 530i FS in Calgary - rami 12:10:10 01/18/04 (1)
    • It's still for sale?? - Brian in Calgary 22:12:44 01/18/04 (0)
• broken shifter please help - raymon 15:40:45 01/17/04 (4)
  • Re: broken shifter please help - Troy Rudolph 23:10:59 01/18/04 (0)
  • Re: broken shifter please help - raymon 17:54:49 01/17/04 (0)
  • It may also be a loose screw... - ChuckNC 17:45:35 01/17/04 (0)
  • rear shift-linkage broken? - ...tom 16:25:42 01/17/04 (0)
• Short behind the Tachometer - Cori Cowan 09:08:38 01/17/04 (8)
  • Check e-mail for picture of tach wires , , , , , - Jeff (Atl) 22:24:25 01/17/04 (0)
  • Re: Short behind the Tachometer - Peter Florance 09:53:16 01/17/04 (3)
    • ok here it is - Peter Florance 09:54:39 01/17/04 (2)
      • Re: - Cori 10:13:32 01/17/04 (1)
        • Re: - Peter Florance 14:37:54 01/17/04 (0)
  • Re: Short behind the Tachometer - Mike V 09:48:26 01/17/04 (2)
    • Re: - Cori 10:10:30 01/17/04 (1)
      • I always like wrapping with electrical tape -- - Jeff (Atl) 22:26:02 01/17/04 (0)
• nice looking '80 528i on ebay, Los Angeles - Adam Wilson in Chicago 08:40:29 01/17/04 (2)
  • VIN lookup says Oct '79 production - Remy Davison 07:36:21 01/18/04 (0)
  • that is schweeeet. just lovely. nm - chrystobal65 10:15:08 01/17/04 (0)
• 528i spotted in local yard, good grey cloth - rexmo 08:09:01 01/17/04 (1)
  • I'm looking for... - Tarazona 09:16:13 01/17/04 (0)
• randy76/530 are yopu out there..? - jim at da shop ( fka newguyinold5er ) 20:24:16 01/16/04 (0)
• Starting problems - Joel 20:17:55 01/16/04 (3)
  • Re: Starting problems - Canada Karl 05:13:30 01/17/04 (0)
  • Re: Starting problems - Mike W. 00:43:30 01/17/04 (1)
    • Re: Starting problems - Joel 01:13:04 01/17/04 (0)
• Mystery M535i from NSW. Speak up!!! - Al from Oz 17:17:03 01/16/04 (3)
  • Re: Mystery M535i from NSW. Speak up!!! - matthewp 17:38:08 01/16/04 (2)
    • Re: Mystery M535i from NSW. Speak up!!! - Al from Oz 21:49:01 01/16/04 (1)
      • Re: Mystery M535i from NSW. Speak up!!! - matthewp 02:22:00 01/17/04 (0)
• Seat Belts - Dan Lafley 14:34:33 01/16/04 (1)
  • Re: Seat Belts - Velocewest 16:12:51 01/16/04 (0)
• Seat leather FS - KSBinVA 13:12:07 01/16/04 (4)
  • I'm interested. Can you send pics? - Brian in Abilene 13:18:20 01/16/04 (3)
    • Re: I'm interested. Can you send pics? - Bob in San Jose 18:41:52 01/16/04 (2)
      • Bob, do you have a brown interior? (more) - Brian in Abilene 21:59:12 01/16/04 (1)
        • Re: Bob, do you have a brown interior? (more) - Bob in San Jose 13:49:18 01/17/04 (0)
• Taillight Assemblies, Taillight lens etc. - Gerry 12:14:40 01/16/04 (7)
  • Tailight lenses??? - Canada Karl 12:42:06 01/16/04 (6)
    • Re: Tailight lenses??? - Randy 76/530 14:44:25 01/16/04 (4)
      • Re: Tailight lenses??? - Blair 15:24:13 01/16/04 (3)
        • Re: Right hand mirror: A Junkyard Tale (long) - Canada Karl 16:36:39 01/16/04 (2)
          • I've got one For Sale... - Mike W. 23:33:14 01/16/04 (1)
            • Re: I've got one For Sale... - pumpkin 16:20:59 01/17/04 (0)
    • yes, the later ones - Blair 14:36:38 01/16/04 (0)
• Bavairia Manifold FS - Blair 11:49:59 01/16/04 (1)
  • Re: Bavairia Manifold FS - Tom Masters 15:59:25 01/16/04 (0)
• Steering pump resevoir or hose leak ? - Canada Karl 09:09:21 01/16/04 (2)
  • have your pressure one redone - Preston in Spokane 18:48:42 01/16/04 (0)
  • Hoses - Matt C 10:38:48 01/16/04 (0)
• The madness of this all........ - Matt C 08:39:47 01/16/04 (23)
  • Some other "fatherly" advice..... - Misha 15:43:51 01/16/04 (0)
  • Do it because you want to..... (long) - Randy 76/530 15:02:41 01/16/04 (7)
    • Randy.... - Eddie 08:17:52 01/19/04 (3)
      • Re: Randy.... - Eddie 10:14:16 01/19/04 (2)
        • Eddie... - Randy 09:23:21 01/20/04 (1)
          • Saw an E12... - Eddie 20:37:23 01/21/04 (0)
    • Re: Do it because you want to..... (long) - Canada Karl 19:26:31 01/16/04 (1)
      • Re: Do it because you want to..... (long) - Randy 76/530 13:31:02 01/17/04 (0)
    • stealth can be a good thing - ChuckNC 15:13:05 01/16/04 (0)
  • You want Justification.. That's easy! - Lars Olbimmerguy 11:13:58 01/16/04 (6)
    • Ya Matt, read Lars, this too!!! NM - Randy 76/530 15:06:10 01/16/04 (0)
    • Re: You want Justification.. That's easy! - Chris Hollis, Huntsville, AL 12:34:18 01/16/04 (4)
      • OH YEAH!... And fly fishing... in particular - Lars Olbimmerguy 13:15:37 01/16/04 (3)
        • YOU MEAN TO TELL ME...... - Chris Hollis, Huntsville, AL 14:05:02 01/16/04 (2)
          • Night before fishing, put on cowboy hat & spurs N' - Lars OBG 15:03:12 01/16/04 (1)
            • YAHHHHH!!!! - ChuckNC 15:50:33 01/16/04 (0)
  • Re: The madness of this all........ - Brad In Texas 09:33:13 01/16/04 (0)
  • agreed with Todd, turbo kit would be cool - Adam Wilson in Chicago 09:32:59 01/16/04 (2)
    • Adam makes a good point... - Tulsa Dave 10:36:46 01/16/04 (0)
    • Thanks adam - Matt C 10:34:51 01/16/04 (0)
  • Re: The madness of this all........ - Canada Karl 09:13:58 01/16/04 (0)
  • Re: The madness of this all........ - Daniel 09:03:30 01/16/04 (0)
  • Re: The madness of this all........ - TCD 08:53:00 01/16/04 (0)
• sth african e 12 worth fixing?? also any tips on how to fix?? - christopher b 08:21:03 01/16/04 (3)
  • Doesn't sound like anything too difficult - Brian in Abilene 13:57:39 01/16/04 (2)
    • sounds like the speedo gear - ChuckNC 15:16:34 01/16/04 (1)
      • P.S. - ChuckNC 20:24:43 01/16/04 (0)
• the days are Not Good. rear suspension BANG!!> - chrystobal65 08:15:10 01/16/04 (3)
  • Where does the noise come from? - Troy Rudolph 08:32:05 01/16/04 (2)
    • i would bet on the carrier mount>> - chrystobal65 09:00:01 01/16/04 (1)
      • on further review, it's the center bearing>> - chrystobal65 14:24:29 01/16/04 (0)
• 320i Intake Runners....FS - Tom Masters 03:20:28 01/16/04 (5)
  • Re: 320i Intake Runners....FS - pumpkin 16:25:26 01/17/04 (0)
  • Re: 320i Intake Runners....FS - Russell Moat 17:36:48 01/16/04 (0)
  • Me Too!!!! - Randy 76/530 15:08:13 01/16/04 (0)
  • I'm interested - Lou in Denver 09:04:52 01/16/04 (0)
  • Re: 320i Intake Runners....FS - Pete 06:43:54 01/16/04 (0)
• Carbs - Daniel 02:08:44 01/16/04 (6)
  • try double dose of techcron injector cleaner in - martc79euro635 19:39:30 01/16/04 (0)
  • carbs - Peter Florance 06:12:29 01/16/04 (4)
    • Re: carbs - Daniel 08:58:05 01/16/04 (3)
      • Re: carbs - Mike W. 23:25:55 01/18/04 (0)
      • Re: carbs - Jamie Seattle 09:03:46 01/16/04 (1)
        • read your plugs - Matt C 10:58:13 01/16/04 (0)
• CHEAP RARE EURO E-12 PARTS IN LOS ANGELES - adam 21:07:53 01/15/04 (2)
  • Wait... I thought the euro E24 bumpers differ... - Nick in Denver 01:21:19 01/17/04 (0)
  • Re: CHEAP RARE EURO E-12 PARTS IN LOS ANGELES - Tito 12:49:49 01/16/04 (0)
• Rattle and bang? - Canada Karl 20:57:23 01/15/04 (6)
  • Re: Rattle and bang? - Troy Rudolph 00:38:44 01/16/04 (0)
  • Can't imagine anything but something on strut rod - Lars Olbimmerguy 23:47:16 01/15/04 (0)
  • Re: Rattle and bang? - Mike W. 23:26:07 01/15/04 (0)
  • Just a thought - Brian in Calgary 23:00:36 01/15/04 (0)
  • Long shot, but... - Tulsa Dave 22:06:37 01/15/04 (0)
  • Re: Rattle and bang? - Matt C 22:04:07 01/15/04 (0)
• bilstein sports w/lowering springs....... - autobahnjim ( fka, newguyinold5er ) 18:18:48 01/15/04 (1)
  • bilstein are rebuildable!!!!! - Wietse 20:15:54 01/15/04 (0)
• time has come to test the waters, "FOR SALE" - billy in SLO 15:41:48 01/15/04 (1)
  • wish i had the $$ i'd buy it for at least $3,750nm - chrystobal65 08:21:28 01/16/04 (0)
• heater core update - chrystobal65 14:55:07 01/15/04 (1)
  • heater controls FAQ - Peter Florance 15:34:21 01/15/04 (0)
• MegaSquirt - Lou in Denver 12:56:10 01/15/04 (7)
  • yes yes - Peter Florance 13:38:31 01/15/04 (6)
    • Here is the link - Lou in Denver 22:06:04 01/15/04 (1)
      • will persue - Peter Florance 06:34:29 01/16/04 (0)
    • Re: yes yes - Lou In Denver 14:51:39 01/15/04 (3)
      • Bone head me... I have a Volvo source - Jeff C 15:18:08 01/15/04 (2)
        • You the man! - lou in denver 15:21:28 01/15/04 (1)
          • Re: You the man! - Jeff C 20:19:05 01/15/04 (0)
• Engine removal question - Matt C 10:22:24 01/15/04 (5)
  • Agreed... Lotta time, energy, money on a >> - Lars OBG 00:32:31 01/16/04 (0)
  • DON'T DO IT! - Bill Bowes 20:02:36 01/15/04 (0)
  • Re: Engine removal question - Troy Rudolph 12:35:22 01/15/04 (1)
    • Rad protection - Brian in Calgary 22:55:37 01/15/04 (0)
  • Re: Engine removal question - Brian in Calgary 11:59:19 01/15/04 (0)
• Engine stand/lift question - 3.5L conversion - Brian in Abilene 10:09:58 01/15/04 (17)
  • Generic, but be careful - Mike W. 23:56:04 01/15/04 (0)
  • I used a generic stand - ...tom 13:38:10 01/15/04 (0)
  • Re: Engine stand/lift question - 3.5L conversion - Troy Rudolph 12:50:50 01/15/04 (13)
    • Thanks, Troy (more) - Brian in Abilene 13:49:40 01/15/04 (12)
      • One more question, maybe two - Brian in Abilene 13:53:04 01/15/04 (11)
        • if you don't do short shift kit complete, - Peter Florance 21:30:50 01/15/04 (8)
          • I have a slight tranny leak from that area anyway - Brian in Abilene 23:06:50 01/15/04 (7)
            • exhaust and tranny - Peter Florance 06:15:52 01/16/04 (6)
              • Thanks for the exhaust advice...e34 huh? - Brian in Abilene 07:56:54 01/16/04 (5)
                • HOSES!!! - Peter Florance 10:40:10 01/16/04 (4)
                  • Um....don't hurt me....no....not yet....(eom) - Brian in Abilene 10:49:56 01/16/04 (3)
                    • man.... - Peter Florance 19:10:56 01/16/04 (2)
                      • Big OOPS. Not calipers, rotors... - Brian in Abilene 21:30:28 01/16/04 (1)
                        • ohhh - Peter Florance 21:49:39 01/16/04 (0)
        • I knew the drive in Adam's old car would get you! - Tulsa Dave 17:32:17 01/15/04 (1)
          • Yes, I'm forever ruined (more) - Brian in Abilene 23:05:27 01/15/04 (0)
  • Re: Engine stand/lift question - 3.5L conversion - Steve Haygood 12:26:01 01/15/04 (0)
• Euro E12 FS found on Roadfly (messageboard) - Mike K 07:27:31 01/15/04 (1)
  • sold (not to me) - ...tom 07:40:36 01/15/04 (0)
• WTB: Late Valve Cover - Klaus 23:52:33 01/14/04 (4)
  • Re: WTB: Late Valve Cover - ChuckNC 14:46:10 01/15/04 (2)
    • Dude! You've got a computer problem! - Tulsa Dave 17:45:03 01/15/04 (1)
      • or both... - ChuckNC 18:35:31 01/15/04 (0)
  • Re: WTB: Late Valve Cover - Chris Hollis, Huntsville 07:29:44 01/15/04 (0)
• getting ready for track day, trunk wing - gabe 21:08:41 01/14/04 (15)
  • Re: getting ready for track day. Long, but wise... - Bill Bowes 20:58:47 01/15/04 (3)
    • thanks much. what about stress bars? - black81gabe 03:35:19 01/17/04 (1)
      • Re: thanks much. what about stress bars? - Peter Florance 07:05:17 01/17/04 (0)
    • a few other brake issue - Peter Florance 06:25:47 01/16/04 (0)
  • If you are spending money on the spoiler... - Eric Q 14:26:05 01/15/04 (0)
  • Re: getting ready for track day, trunk wing - Niklas Edlund 10:09:06 01/15/04 (9)
    • actually, the BBS rear spoiler harder to find - Adam Wilson in Chicago 10:48:50 01/15/04 (8)
      • .. but not in Europe (picture link included) - Niklas Edlund 10:34:54 01/16/04 (2)
        • Re: .. but not in Europe (picture link included) - Adam Wilson in Chicago 11:36:38 01/16/04 (1)
          • Yes ! , It's my e12 in the video ... (pic) - Niklas Edlund 11:23:47 01/19/04 (0)
      • Zender spoilers look the same. - Nick in Denver 13:51:06 01/15/04 (4)
        • I've scored two for my cars... - Tulsa Dave 17:35:52 01/15/04 (0)
        • Arent spoilers just for looks...... - Canada Karl 16:12:55 01/15/04 (2)
          • Re: Arent spoilers just for looks...... - black81gabe 19:48:48 01/15/04 (1)
            • Spoilers don't add 20 hp... - Tulsa Dave 19:55:12 01/15/04 (0)
• total length of m30 engine including the fan?? - Robspeed 20:58:04 01/14/04 (1)
  • I get about 31" from back of head to front of fan - rexmo 08:15:29 01/15/04 (0)
• HELP with door adjusting - Brian in Calgary 20:18:55 01/14/04 (4)
  • Re: HELP with door adjusting - Peter Florance 06:19:04 01/15/04 (3)
    • used floor jack - Brian in Calgary 10:14:07 01/15/04 (2)
      • I had to grind the holes larger to adjust my door - martc79euro635 22:22:42 01/15/04 (1)
        • Thanks Marc, will try that (nt) - Brian in Calgary 10:04:18 01/16/04 (0)
• rut-ro i believe it's heater core blowout>> - chrystobal65 18:15:49 01/14/04 (6)
  • Hey Chris ..sorry no e12 antenna's at Alex's - John in NH 06:26:22 01/15/04 (0)
  • Re: rut-ro i believe it's heater core blowout>> - Matt C 20:07:12 01/14/04 (4)
    • thin coolant. wow, that could be it, bro....> - chrystobal65 21:33:10 01/14/04 (3)
      • i feel your pain - mikey 01:01:15 01/15/04 (2)
        • Heater Core: Temporary Solution - Canada Karl 08:23:10 01/15/04 (1)
          • wow, that's a potential idea...R&R too much $$> - chrystobal65 11:19:24 01/15/04 (0)
• what e12 do u guys preffer in here - Rami 13:19:42 01/14/04 (20)
  • E12/8 and 1974-77 E12s - Remy Davison 06:56:56 01/15/04 (0)
  • the M535i without a doubt - Adam Wilson in Chicago 06:41:36 01/15/04 (1)
    • there's a butt for every seat - Peter Florance 07:18:57 01/15/04 (0)
  • 80/81 with a couple of exceptions. - Lars OBG 01:57:17 01/15/04 (0)
  • 528i - Mike W. 00:21:48 01/15/04 (12)
    • i'll echo that and also caution the fuel door> - chrystobal65 05:09:20 01/15/04 (11)
      • Nader was wrong about the Corvair - Troy Rudolph 09:17:16 01/15/04 (10)
        • i love corvairs & respectfully disagree. delorean> - chrystobal65 11:27:00 01/15/04 (9)
          • I think it was a '63 4-door, but 20+ years.. (eom) - Troy Rudolph 12:55:32 01/15/04 (1)
            • but you know, i love that *SPIRIT* troy....> - chrystobal65 13:37:59 01/15/04 (0)
          • interesting points - Adam Wilson in Chicago 11:38:34 01/15/04 (2)
            • Hi Adam, chrystobal is sorta my real name> - chrystobal65 12:02:21 01/15/04 (1)
              • cool, thanks, nice to meet you (nt) - Adam Wilson in Chicago 12:46:53 01/15/04 (0)
          • here are the corvairs that weren't (LINK) - chrystobal65 11:33:13 01/15/04 (3)
            • Corvair...you didnt need to roll it? - Canada Karl 17:51:44 01/15/04 (2)
              • yeah, i know...i didn't get into that, but a guy > - chrystobal65 19:11:33 01/15/04 (1)
                • Re: yeah, i know...i didn't get into that, but a guy > - Canada Karl 21:05:42 01/15/04 (0)
  • different cars for different reasons - Peter Florance 16:52:57 01/14/04 (0)
  • Re: what e12 do u guys preffer in here - Blair 15:58:41 01/14/04 (1)
    • Re: what e12 do u guys preffer in here - Dave 16:19:54 01/14/04 (0)
• Looking for mint, original E12 in L.A. for article - Alex 12:41:34 01/14/04 (9)
  • Excellent 530i in Northridge - John in Simi Valley 00:25:18 01/16/04 (1)
    • Pic - J in S.V. 00:27:14 01/16/04 (0)
  • How 'bout this one - Troy Rudolph 15:21:19 01/14/04 (6)
    • Ah, not that one again!! - Randy 76/530 07:37:49 01/15/04 (1)
      • He's looking for one to write about, not buy (eom) - Troy Rudolph 09:18:24 01/15/04 (0)
    • see if Ucan boost the heater core out that puppy> - chrystobal65 21:39:01 01/14/04 (3)
      • Re: see if Ucan boost the heater core out that puppy> - Canada Karl 08:31:25 01/15/04 (2)
        • Speaking of "scale-free"... - Eric Q 14:14:11 01/15/04 (1)
          • Re: Speaking of "scale-free"... - Canada Karl 06:12:46 01/16/04 (0)
• Paging Don Daynes - joe 09:06:33 01/14/04 (0)
• Tranny question - Daniel 19:12:26 01/13/04 (3)
  • If it's a 4 speed, then not a dogleg . . . - Bob/E12/6er 19:35:36 01/13/04 (2)
    • I think there was only one 4 speed manual, right? - Eric Q 19:41:48 01/13/04 (1)
      • I think so for e12's, the Getrag 262 - Velocewest 19:48:43 01/13/04 (0)
• '93 M5 Engine, Trans, et al on eBay - Troy Rudolph 15:15:35 01/13/04 (11)
  • Things to consider.... - Wietse 12:11:42 01/14/04 (6)
    • Agree with Eddie - Troy Rudolph 18:35:37 01/14/04 (0)
    • Re: Things to consider.... - Eddie 12:59:49 01/14/04 (3)
      • Alternate route is to go with an MM 3.8L.... - Misha 16:00:52 01/14/04 (2)
        • Re: Alternate route is to go with an MM 3.8L.... - Blair 19:26:22 01/14/04 (1)
          • L-jet if up to this. Jim Rowe has performend - Misha 17:17:51 01/15/04 (0)
  • Re: '93 M5 Engine, Trans, et al on eBay - rami 19:09:53 01/13/04 (3)
    • Re: '93 M5 Engine, Trans, et al on eBay - Troy Rudolph 08:45:36 01/14/04 (0)
    • what it fit in the e12 - rami 19:26:34 01/13/04 (1)
      • Re: what it fit in the e12 - Blair 02:24:51 01/14/04 (0)
• Chuck in NC - Martin 14:29:51 01/13/04 (1)
  • front bits - ChuckNC 15:28:51 01/14/04 (0)
• newest donor arrival..!!!!!!! - jim at da shop (newguyinold5er) 11:02:00 01/13/04 (0)
• Bilstein HDs on eBay - Troy Rudolph 10:09:23 01/13/04 (5)
  • Re: Bilstein HDs on eBay - Bob in San Jose 14:43:09 01/13/04 (4)
    • Re: Bilstein HDs on eBay - Tom Masters 17:40:34 01/13/04 (1)
      • New ones are barely more than that (nt) - Velocewest 19:49:58 01/13/04 (0)
    • Re: Bilstein HDs on eBay - joe 14:58:36 01/13/04 (1)
      • thats ASI or shox,com - jim at da shop 18:03:36 01/13/04 (0)
• Heater Core Flush Success Rate??? - Canada Karl 09:57:47 01/13/04 (9)
  • Some - Mike W. 00:16:14 01/14/04 (0)
  • Re: Heater Core Flush Success Rate??? - Daniel 19:14:30 01/13/04 (0)
  • Re: Heater Core Flush Success Rate??? - Canada Karl 16:17:34 01/13/04 (1)
    • $90 and purchased from Maximillian.... - Misha 18:54:25 01/13/04 (0)
  • I would replace - Misha 13:39:58 01/13/04 (0)
  • Re: Heater Core Flush Success Rate??? - Misha 13:39:26 01/13/04 (0)
  • Re: Heater Core Flush Success Rate??? - Mike V 10:16:29 01/13/04 (2)
    • Re: Heater Core Flush Success Rate??? - Canada Karl 12:55:35 01/13/04 (1)
      • Re: Heater Core Flush Success Rate??? - Mike V in the Jaw 13:49:05 01/13/04 (0)
• power brake unit - alex in s. fl 07:57:34 01/13/04 (3)
  • Re: power brake unit - Ryan Bryan 08:17:37 01/13/04 (2)
    • Re: power brake unit - alex in s. fl 11:22:06 01/13/04 (1)
      • It sounds like the vacuum booster is bad... - Tulsa Dave 12:16:07 01/13/04 (0)
• E12 in San Diego - Peter Florance - First Fives Dictator for Life 06:05:35 01/13/04 (1)
  • It might be me... - Eric Q 14:22:24 01/13/04 (0)
• How do i get my car in the Member gallery ??? - Niklas Edlund 02:59:14 01/13/04 (2)
  • Re: How do i get my car in the Member gallery ??? - Troy Rudolph (Webmaster) 08:41:25 01/13/04 (1)
    • Its in the Mail ! (nt) - Niklas Edlund 11:08:01 01/13/04 (0)
• Heater Round II - Dan Lafley 01:05:11 01/13/04 (1)
  • Re: Heater Round II - Canada Karl 09:36:15 01/13/04 (0)
• Reactor Light Question - D Farrell 23:29:03 01/12/04 (1)
  • Re: Reactor Light Question - Mike W. 00:43:43 01/13/04 (0)
• peter,is it you that installed megasqirt ? - marc79euro 635 22:54:48 01/12/04 (3)
  • Re: peter,is it you that installed megasqirt ? - Bob Humphrey 23:20:01 01/14/04 (0)
  • Re: peter,is it you that installed megasqirt ? - Peter Florance 06:32:30 01/13/04 (1)
    • I'm very interested, let me know, thanks - marc79euro 635 22:15:09 01/13/04 (0)
• E-12 sighting Kennebunk, Maine. - Matt C 22:40:52 01/12/04 (1)
  • did you leave him a firstfives flyer? - Adam Wilson in Chicago 22:55:17 01/12/04 (0)
• Thanks Adam and the Grill Badge Buyers - Peter Florance - First Fives Dictator for Life 12:45:46 01/12/04 (5)
  • list of contributors - Adam Wilson in Chicago 12:56:05 01/12/04 (4)
    • Re: list of contributors - Jim 20:36:48 01/12/04 (2)
      • only for the 2nd grille badge order - Adam Wilson in Chicago 22:13:05 01/12/04 (1)
        • Re: only for the 2nd grille badge order - Jim 20:09:47 01/13/04 (0)
    • also on sponsor page - Peter Florance - First Fives Dictator for Life 12:59:06 01/12/04 (0)
• for those w/o A/C, do you have an aux. fan? - ...tom 11:57:23 01/12/04 (5)
  • Stock w/o airco has no aux fan - Harm Grooten 13:04:59 01/12/04 (0)
  • Re: for those w/o A/C, do you have an aux. fan? - Troy Rudolph 12:23:59 01/12/04 (3)
    • after removal of the a/c system, do I need a fan? - ...tom 12:36:20 01/12/04 (2)
      • Have been perusing Subaru dual fan setup.... - Lars Olbimmerguy 14:09:08 01/12/04 (1)
        • Re: Have been perusing Subaru dual fan setup.... - Canada Karl 19:33:36 01/12/04 (0)
• parting an e12 based 6er - jim at da shop (newguyinold5er) 11:29:27 01/12/04 (7)
  • I have a non AC 530i, and - Blair 15:19:24 01/12/04 (0)
  • Re: parting an e12 based 6er - jim in da shop 14:04:17 01/12/04 (0)
  • Don't suppose it has a good motor, does it? - Brian in Abilene 13:15:51 01/12/04 (0)
  • Re: parting an e12 based 6er - Rami 12:58:57 01/12/04 (1)
    • Nope... different angle from center to ends. - Lars OBG 14:11:21 01/12/04 (0)
  • Hey Jim... Call me, your cell isn't working - Jeff C 12:44:34 01/12/04 (0)
  • Jim, where are you?, and do you have a . . . - Bob/E12/6er 12:09:51 01/12/04 (0)
• Become in weeks!!!!!!!!!$$$$$$$$$$$ - Ike Bone 10:58:35 01/12/04 (1)
  • complaint sent to INFOAVE.NET - spam slammer 06:22:04 01/13/04 (0)
• Paging Don Daynes - seat swap question... - Bob/E12/6er 10:27:21 01/12/04 (3)
  • Re: Paging Don Daynes - seat swap question... - Don Daynes 19:58:07 01/12/04 (2)
    • Re: Paging Don Daynes - seat swap question... - KSBinVA 06:57:05 01/13/04 (1)
      • Thanks guys! Pretty much what I wanted to hear! - Bob/E12/6er 10:20:48 01/13/04 (0)
• my e12 is in pain, please help - Rami 10:21:18 01/12/04 (5)
  • Re: my e12 is in pain, please help - KSBinVA 12:52:20 01/13/04 (0)
  • Particularly the big copper colored filter?? - Lars OBG 11:03:08 01/12/04 (0)
  • Re: my e12 is in pain, please help - charlie 10:44:33 01/12/04 (2)
    • Re: my e12 is in pain, please help - Rami 12:20:39 01/12/04 (1)
      • Re: my e12 is in pain, please help - Suzdog 01:02:12 01/18/04 (0)
• More e12 Turbo progress - Mike in Chicago 10:01:54 01/12/04 (4)
  • need an oil cooler..? give me a yell........ - jim at da shop 11:27:19 01/12/04 (0)
  • Good job. - TCD 10:30:39 01/12/04 (2)
    • Re: Good job. - Mike in Chicago 10:46:57 01/12/04 (1)
      • Yep, grind down a socket. - TCD 12:34:18 01/12/04 (0)
• Car acting strange - D Farrell 08:44:08 01/12/04 (3)
  • Re: Car acting strange...(very long) - Ryan Bryan 09:03:24 01/12/04 (0)
  • Sounds like an air bubble somewhere to me... - Brian in Abilene 08:48:26 01/12/04 (1)
    • Re: Sounds like an air bubble somewhere to me... - Ryan Bryan 09:06:34 01/12/04 (0)
• ATTN: FIRSTFIVES get-the-word-out wallet flyer - Adam Wilson in Chicago 08:31:47 01/12/04 (1)
  • Great Idea - Lou In Denver 08:38:06 01/12/04 (0)
• e12 mechanics in San Diego? - Peter Florance 06:37:05 01/12/04 (3)
  • Re: e12 mechanics in San Diego? - james 06:53:14 01/12/04 (2)
    • LaJolla Independent - Karl in KS 20:50:17 01/12/04 (0)
    • Re: e12 mechanics in San Diego? - Jim Hineline 20:19:17 01/12/04 (0)
• L-jetronic conversion - charlie 05:10:34 01/12/04 (3)
  • Re: L-jetronic conversion - Blair 11:16:46 01/12/04 (2)
    • Re: L-jetronic conversion - Charlie 01:25:54 01/13/04 (1)
      • Re: L-jetronic conversion - blair 02:24:10 01/13/04 (0)
• any young e12 owners here - Rami-winnipeg 21:12:01 01/11/04 (20)
  • 21 yrs old, bought the E12 when I just turned 19. - Nick in Denver 12:29:53 01/14/04 (0)
  • I'm 20, - Daniel 12:34:35 01/12/04 (5)
    • how come your email addy is correct "bimmer" but> - chrystobal65 13:42:21 01/15/04 (0)
    • Senior Six? - ChuckNC 14:37:06 01/12/04 (3)
      • No Chuck... That would be me.... - Lars Olbimmerguy 18:30:18 01/12/04 (2)
        • heh... (nt) - ChuckNC 18:41:34 01/12/04 (1)
          • Yeah, I'd be the senior sexagenerion of the bunch - Lars Olbimmerguy 00:54:19 01/13/04 (0)
  • I'm two 19 and a half year olds. (tee hee) - ChuckNC 12:23:16 01/12/04 (0)
  • Is 26 still considered young??? - Brian in Abilene 07:45:20 01/12/04 (0)
  • wish I was old (longish) - Harm Grooten 07:10:35 01/12/04 (0)
  • creeping up on 39 in april. first BMW at 32 nm - chrystobal65 01:06:04 01/12/04 (0)
  • How about young in spirit? - Mike W. 00:56:35 01/12/04 (0)
  • Re: any young e12 owners here - Joel 21:56:42 01/11/04 (0)
  • Your not alone.....19 - Dan Lafley 21:13:58 01/11/04 (2)
    • Re: Your not alone.....19 - Ryan Bryan 21:21:58 01/11/04 (0)
    • Re: Your not alone.....19 - rami 21:16:43 01/11/04 (0)
  • just turned 28, does that count? (eom) - Adam Wilson in Chicago 21:13:26 01/11/04 (3)
    • Re: just turned 28???? - Brian in Calgary 21:33:50 01/11/04 (0)
    • Re: just turned 28, does that count? (eom) - rami 21:17:36 01/11/04 (1)
      • I'm 21, bought my first E12 @ 18. Stll luvin it.NT - Blair 00:35:17 01/12/04 (0)
• 225/50 16 tires on E12 - Brian in Calgary 17:26:53 01/11/04 (16)
  • Re: 225/50 16 tires on E12 - YES !!! - Niklas Edlund 11:07:51 01/13/04 (4)
    • Re: 225/50 16 tires on E12 - YES !!! - Bert-Ola 16:40:35 01/13/04 (3)
      • Re: 225/50 16 tires on E12 - YES !!! - Niklas Edlund 06:26:40 01/14/04 (2)
        • Re: 225/50 16 tires on E12 - YES !!! - Bert-Ola 15:17:05 01/14/04 (1)
          • OK (nt) - Niklas Edlund 10:18:01 01/15/04 (0)
  • Re: 225/50 16 tires on E12 - newguyinold5er 22:49:36 01/11/04 (0)
  • Re: 225/50 16 tires on E12 - Ryan Bryan 17:53:24 01/11/04 (9)
    • Re: 225/50 16 tires on E12 - will ollison 19:56:36 01/11/04 (8)
      • Nice art work boys but.... - Brian in Calgary 21:36:37 01/11/04 (2)
        • Re: Nice art work boys but.... - Ryan Bryan 21:47:05 01/11/04 (1)
          • Thanks Ryan.. - Brian in Calgary 21:50:59 01/11/04 (0)
      • Re: 225/50 16 tires on E12 - Ryan Bryan 20:36:18 01/11/04 (4)
        • Re: 225/50 16 tires on E12 - Will Ollison 20:53:46 01/11/04 (3)
          • Re: 225/50 16 tires on E12 - Ryan Bryan 21:39:07 01/11/04 (2)
            • It may be cold here but... - Brian in Calgary 21:47:34 01/11/04 (1)
              • Re: It may be cold here but... - Ryan Bryan 21:59:07 01/11/04 (0)
• E12 spotted in Calgary - Brian in Calgary 17:24:43 01/11/04 (18)
  • Got some pictures of it... - Brian in Calgary 22:49:01 01/11/04 (5)
    • Re: Got some pictures of it... - Mike in Chicago 10:29:29 01/12/04 (2)
      • whatever happened .... - Adam Wilson in Chicago 10:42:39 01/12/04 (1)
        • Got out bid... - Mike in Chicago 11:53:00 01/12/04 (0)
    • man, REAL nice car! - Adam Wilson in Chicago 09:00:32 01/12/04 (0)
    • Are those elipsoid headlights?? NT - Blair 00:36:40 01/12/04 (0)
  • Re: E12 spotted in Calgary - rami 21:05:44 01/11/04 (0)
  • Re: E12 spotted in Calgary - Medly 19:54:14 01/11/04 (1)
    • Re: E12 spotted in Calgary - Canada Karl 21:47:19 01/11/04 (0)
  • no rust?? ALSO, firstfives/E12 business card - Adam Wilson in Chicago 18:22:14 01/11/04 (8)
    • great idea - Peter Florance 19:20:41 01/11/04 (6)
      • the good thing about a business card .... - Adam Wilson in Chicago 19:48:55 01/11/04 (5)
        • Just leave 'em a $20 with the F5R url written... - Velocewest 01:30:27 01/12/04 (0)
        • Re: the good thing about a business card .... - Will ollison 20:50:35 01/11/04 (3)
          • attempt at a firstfives get-the-word-out flyer - Adam Wilson in Chicago 21:26:35 01/11/04 (2)
            • Nice job! (nt) - Mike W. 00:15:21 01/12/04 (0)
            • Card looks great!!! - Brian in Calgary 21:43:10 01/11/04 (0)
    • Hey i like it.... - Dan Lafley 19:20:02 01/11/04 (0)
• Rear tires and Diff Questions - Canada Karl 17:20:57 01/11/04 (8)
  • Most likely toe - Mike W. 20:56:43 01/11/04 (1)
    • sag cause toe problems? - Peter Florance 06:38:55 01/13/04 (0)
  • Re: Rear tires and Diff Questions - marc79euro635 20:31:33 01/11/04 (0)
  • Re: Rear tires and Diff Questions - Brian in Calgary 17:29:45 01/11/04 (4)
    • Re: Rear tires and Diff Questions - Canada Karl 20:10:34 01/11/04 (3)
      • Steel wheels get stuck (nt) - Brian in Calgary 21:52:53 01/11/04 (2)
        • So do alloys - Mike W. 00:10:45 01/12/04 (0)
        • Re: Steel wheels get stuck (nt) - Canada Karl 23:20:30 01/11/04 (0)
• Got it runnin' - Daniel 16:44:24 01/11/04 (1)
  • cut in an extra gas filter,just ahead of injector - marc79euro635 20:35:42 01/11/04 (0)
• Shifting through an automatic's gears manually - John in NH 15:00:08 01/11/04 (3)
  • Re: Shifting through an automatic's gears manually - Mike W. 21:04:26 01/11/04 (0)
  • Re: Shifting through an automatic's gears manually - Will Ollison 18:01:11 01/11/04 (0)
  • It will kill it - Sam Schultz 15:43:35 01/11/04 (0)
• M535i in NY? - Frank H 11:53:08 01/11/04 (2)
  • a new one! Cool! - Adam Wilson in Chicago 18:19:00 01/11/04 (0)
  • Re: M535i in NY? - - joe 13:54:28 01/11/04 (0)
• Paging Brian in Calgary - Canada Karl 11:10:36 01/11/04 (1)
  • Posted followup by original mess. (nt) - Brian in Calgary 12:25:00 01/11/04 (0)
• M535i E12 forsale in France - Francois Gaignaux 11:08:39 01/11/04 (0)
• any suggestions - Jamie Seattle 07:08:30 01/11/04 (1)
  • Re: any suggestions - Blair 15:50:44 01/11/04 (0)
• Just visiting. Know a white e12 in Fort Worth? - djazz 03:14:35 01/11/04 (0)
• Nice Leather Recaros on Ebay - Brian in Calgary 00:40:42 01/11/04 (0)
• I'm looking for a wiper assembly.......... - jason 23:59:40 01/10/04 (1)
  • al taylor has them - sam schultz 08:32:19 01/11/04 (0)
• U.S. 3.5 in E12? - jerry kingman 21:38:54 01/10/04 (7)
  • I did - Peter Florance 07:41:34 01/11/04 (0)
  • Re: U.S. 3.5 in E12? - Mike W. 22:45:10 01/10/04 (5)
    • what i want to know is: - mikey 21:42:35 01/11/04 (4)
      • Yes - Troy Rudolph 09:23:44 01/12/04 (2)
        • Whoa! very nice car - mikey 09:38:28 01/12/04 (1)
          • In my '79, ... - Troy Rudolph 12:18:51 01/12/04 (0)
      • I know someone with a 3.5 and Motronic - Velocewest 01:33:25 01/12/04 (0)
• Battery - Canada Karl 17:42:01 01/10/04 (0)
• a-wrenchin' we will go... - ChuckNC 16:28:03 01/10/04 (2)
  • Re: a-wrenchin' we will go... - Mike W. 22:55:18 01/10/04 (0)
  • The nose and everything will fit with out a proble - Sam Schultz 16:57:24 01/10/04 (0)
• FS: Exceptional E12 with nice upgrades.... - Gavin 13:24:40 01/10/04 (5)
  • it's also got my fave bmw rim, my 533 had it. nm - chrystobal65 17:01:51 01/10/04 (0)
  • with those mods, and that great of a body... - Adam Wilson in Chicago 15:35:56 01/10/04 (2)
    • Adam...are you telling me that... - Brian in Calgary 19:46:09 01/10/04 (0)
    • Im trying to convince my Dad (SoCal) to buy it, or - Brian in Abilene 16:38:39 01/10/04 (0)
  • Beautiful Car!!! Wish I had the $$$ - Mark (Seattle) visiting from 14:37:13 01/10/04 (0)
• E12 E24 E28 E30 video - james 09:57:05 01/10/04 (4)
  • Very cool clip - Brian in Calgary 12:37:03 01/11/04 (0)
  • Crap!!! What do I need to play this damn thing? - Adam Wilson in Chicago 11:19:06 01/10/04 (2)
    • Well, most likely a broadband connection And - Lars Olbimmerguy 11:40:11 01/10/04 (0)
    • answer: Divx Player and plug-in - Adam Wilson in Chicago 11:35:02 01/10/04 (0)
• Spring/strut/shock replacement - Brian in Abilene 08:40:21 01/10/04 (4)
  • Re: Spring/strut/shock replacement - jim home from the shop 16:16:22 01/10/04 (3)
    • my favorite strut replacement trick - Velocewest 21:00:09 01/10/04 (0)
    • Thanks, Jim. Will do, and I'll keep you posted!! - Brian in Abilene 16:37:06 01/10/04 (1)
      • Re: Thanks, Jim. Will do, and I'll keep you posted!! - jim home from the shop 16:44:04 01/10/04 (0)
• rut-ro...can't close the hood. gonna try pliers > - chrystobal65 07:49:59 01/10/04 (2)
  • mine does this occasionally - ...tom 08:01:39 01/10/04 (1)
    • yep, it was the latch. All Good. nm - chrystobal65 08:09:49 01/10/04 (0)
• How would i know if my diff is LSD? - Tito 20:43:17 01/09/04 (3)
  • Clutch in -- rev to 4,000 -- clutch out - Velocewest 23:23:03 01/09/04 (0)
  • Bob Stutterfield said it best - RDAvena 21:16:20 01/09/04 (1)
    • Re: Bob Stutterfield said it best - Tito 04:06:34 01/10/04 (0)
• E12 parts car - Dylan 18:47:49 01/09/04 (0)
• Need Heat...E12 into the 30 below! - Canada Karl 18:35:13 01/09/04 (12)
  • Coming from the Calgary.....(long)..(very long). - Brian in Calgary 22:45:59 01/10/04 (4)
    • Re: Coming from the Calgary.....(long)..(very long). - Canada Karl 10:06:41 01/11/04 (3)
      • Block Heater and Oil - Brian in Calgary 12:24:16 01/11/04 (2)
        • Re: Block Heater and Oil - Canada Karl 15:30:09 01/11/04 (1)
          • Valve Adjustment Cost - Brian in Calgary 17:15:38 01/11/04 (0)
  • Re: Need Heat...E12 into the 30 below! - Mike W. 00:06:13 01/10/04 (0)
  • Re: Need Heat...E12 into the 30 below! - T.Han 23:30:15 01/09/04 (4)
    • Re: Need Heat...E12 into the 30 below! - Canada Karl 06:55:56 01/10/04 (3)
      • Re: Need Heat...E12 into the 30 below! - T.Han 10:56:36 01/10/04 (2)
        • Re: Need Heat...E12 into the 30 below! - Ryan Bryan 11:33:35 01/10/04 (1)
          • Re: Need Heat...E12 into the 30 below! - T.Han 21:26:11 01/10/04 (0)
  • Re: Need Heat...E12 into the 30 below! - Sam Schultz 18:42:22 01/09/04 (0)
• I cant believe I didnt gat any bids for my 530I - rick 18:23:55 01/09/04 (3)
  • do reserve instead - Peter Florance 21:48:06 01/09/04 (0)
  • the e12s dont get respect and NO AC hurts - Sam Schultz 18:32:50 01/09/04 (1)
    • Re: the e12s dont get respect and NO AC hurts - rick 18:46:32 01/09/04 (0)
• anyone in greensboro NC? - ...tom 18:02:04 01/09/04 (1)
  • Just there today, more... - Jeff Olson 18:10:11 01/09/04 (0)
• 528i euro for sale - maria 17:03:31 01/09/04 (3)
  • just called its an 81 and I will see it later this - Sam Schultz 17:59:37 01/09/04 (1)
    • more info from last year - ...tom 08:08:29 01/10/04 (0)
  • what year? - Peter Florance 17:20:38 01/09/04 (0)
• anyone know this ebay car in pompano Beach FL? - ...tom 14:57:37 01/09/04 (3)
  • Re: anyone know this ebay car in pompano Beach FL? - rick 18:31:44 01/09/04 (1)
    • Re: anyone know this ebay car in pompano Beach FL? - Mark Zuspan 13:18:12 01/16/04 (0)
  • info from seller... - joe 15:49:24 01/09/04 (0)
• Engine Weight - Jim Davis 14:34:09 01/09/04 (5)
  • Just shipped a euro 3.5L @ 600lbs. If shipping... - Misha 17:39:24 01/09/04 (1)
    • This included all Motronics goodies as well. - Misha 17:41:04 01/09/04 (0)
  • http://www.angelfire.com/ar/dw42/engfyi.htm - Troy Rudolph 17:36:51 01/09/04 (0)
  • John Burns (unixnerd) site shows bare 315# - Lars Olbimmerguy 16:45:54 01/09/04 (0)
  • Re: Engine Weight - Ryan Bryan 14:52:37 01/09/04 (0)
• Headlights - Victor 12:19:27 01/09/04 (14)
  • Re: Headlights; a set of E-codes - jerry kingman 21:17:02 01/09/04 (3)
    • H4's? - Peter Florance 22:06:51 01/09/04 (2)
      • Re: H4's? - Velocewest 23:27:46 01/09/04 (1)
        • I know - Peter Florance 06:44:54 01/10/04 (0)
  • Re: Headlights - Ryan Bryan 14:48:18 01/09/04 (0)
  • Sure, if they're five and a quarter inch - Adam Wilson in Chicago 12:43:38 01/09/04 (4)
    • You meant 5.75, I'm sure. (eom) - Troy Rudolph 13:57:05 01/09/04 (1)
      • oops, yeah (nt) - Adam Wilson in Chicago 14:17:10 01/09/04 (0)
    • Re: Sure, if they're five and a quarter inch - Victor 12:52:14 01/09/04 (1)
      • You can find Hellas almost anywhere, - Velocewest 15:59:23 01/09/04 (0)
  • You mean the projector lamps? - Velocewest 12:22:03 01/09/04 (3)
    • Re: You mean the projector lamps? - Victor 12:29:07 01/09/04 (2)
      • Right, ... - Troy Rudolph 12:41:06 01/09/04 (1)
        • Re: Right, ... - Victor 12:47:17 01/09/04 (0)
• some more snow picts - Frank H 11:16:16 01/09/04 (4)
  • Re: some more snow picts - Jim 21:57:20 01/09/04 (1)
    • Yeh your right... as it was I need my neighbors - Frank H 10:41:20 01/10/04 (0)
  • it's even snowing here - Peter Florance 11:19:56 01/09/04 (1)
    • More to that story - Jeff C 20:12:26 01/09/04 (0)
• Steering wheel - Martin 23:20:23 01/08/04 (2)
  • Re: Steering wheel - Velocewest 10:33:18 01/09/04 (0)
  • Nope....... - Blair 02:05:40 01/09/04 (0)
• Car of the Month - January 2004 - Troy Rudolph (Webmaster) 19:40:30 01/08/04 (8)
  • cool, cool. but if he chrome plates the suspension - chrystobal65 08:14:18 01/10/04 (0)
  • COTM orig rims - Matt C 06:35:37 01/09/04 (3)
    • I beleive the rims are OEM and not rare at all (m) - billy in SLO 12:55:05 01/09/04 (2)
      • I agree, I think ... - Troy Rudolph 13:58:52 01/09/04 (1)
        • The style "A" wheels........ - Matt C 16:51:26 01/09/04 (0)
  • Nice color choice and quite the project - Misha 00:21:37 01/09/04 (0)
  • Re: Car of the Month - January 2004 - Michael K 21:21:05 01/08/04 (1)
    • I posted right after your reminder .... - Troy Rudolph (Webmaster) 21:35:23 01/08/04 (0)
• COTM (car of the month) - Michael K 18:09:34 01/08/04 (1)
  • Thanks for the reminder (eom) - Troy Rudolph (Webmaster) 19:39:40 01/08/04 (0)
• Toolkit Blues - Eric 17:30:53 01/08/04 (3)
  • Complete Large Euro tool kit - Craig Day 08:37:25 01/09/04 (0)
  • check out the FAQ I wrote a while back (nt) - Adam Wilson in Chicago 22:25:25 01/08/04 (0)
  • Try this link for new tools. - Bob/E12 6er 17:59:57 01/08/04 (0)
• Seattle area mechaninc to do engine swap - MIke Glidewell 15:54:34 01/08/04 (3)
  • Re: Seattle engine swap -Do it yourself bruddah! - Ty Webb 10:45:29 01/09/04 (1)
    • I agree with Ty - Brian in Calgary 13:09:45 01/09/04 (0)
  • Re: Seattle area mechaninc to do engine swap - newguyinold5er 19:56:32 01/08/04 (0)
• head bolts - john newman 12:31:42 01/08/04 (1)
  • I think you got the wrong forum................ NT - Blair 13:35:17 01/08/04 (0)
• Heating problems - Victor 07:50:39 01/08/04 (8)
  • Re: Heating problems - Mike W. 23:50:56 01/08/04 (3)
    • Re: Heating problems - Victor 00:53:44 01/09/04 (2)
      • Re: Heating problems - Peter Florance 06:21:29 01/09/04 (1)
        • Re: Heating problems - Victor 12:05:56 01/09/04 (0)
  • heater controls FAQ - Peter Florance 08:30:22 01/08/04 (3)
    • Re: heater controls FAQ - Victor 08:51:36 01/08/04 (2)
      • heater hoses correctly installed? - Peter Florance 10:21:27 01/08/04 (1)
        • Re: heater hoses correctly installed? - Victor 11:33:23 01/08/04 (0)
• Yeehaa! Seats and limited slip installed - KSBinVA 07:05:06 01/08/04 (2)
  • OMG, Kendell, you finally got that LSD! - TCD 08:59:29 01/08/04 (1)
    • Oh, yea!! Just had to keep the faith - KSBinVA 09:57:09 01/08/04 (0)
• FREELANCE JOBS AVAILABLE!!! - Ezeefreelance 07:00:54 01/08/04 (1)
  • webmaster please block 202.177.165.89 - spam slammer 08:27:38 01/08/04 (0)
• possible e12 525 purhase - Peter Crow 02:19:31 01/08/04 (1)
  • Info - Troy Rudolph 09:34:42 01/08/04 (0)
• Gear Indicator lights - Brian in Calgary 23:33:37 01/07/04 (3)
  • Re: Gear Indicator lights - Jeff C 09:05:19 01/08/04 (1)
    • Dimmer switch is fine - Brian in Calgary 23:26:01 01/08/04 (0)
  • Re: Gear Indicator lights - Tom Masters 00:11:51 01/08/04 (0)
• Another 3.5 on eBay - Troy Rudolph 22:43:53 01/07/04 (0)
• Paging daniel.... - Matt C 18:23:39 01/07/04 (1)
  • Re: Paging daniel.... - Daniel 20:13:08 01/07/04 (0)
• Snow - Frank H 13:01:51 01/07/04 (7)
  • And spare a thought for us too!! - Al from Oz 04:08:20 01/08/04 (1)
    • Hey!!! Isn't it Summer there?????? - Lars Olbimmerguy 09:52:03 01/08/04 (0)
  • Wow! - Velocewest 23:08:54 01/07/04 (0)
  • And to think I have considered... - Brian in Calgary 22:58:10 01/07/04 (0)
  • Yea, I know what you mean. Today in... - Bill Bowes 18:57:52 01/07/04 (0)
  • We should all donate $10 so the e12 gets a garage - Sam Schultz 18:52:26 01/07/04 (0)
  • Re: Snow - Jim 17:49:48 01/07/04 (0)
• Exhaust Bracket? - Troy Rudolph 12:53:51 01/07/04 (2)
  • Re: Exhaust Bracket? - Chris Hollis 19:57:16 01/07/04 (1)
    • yes, please. - Troy Rudolph 21:44:15 01/07/04 (0)
• Clean 528i sighting - Joel 06:54:48 01/07/04 (0)
• E21 Recaros/steering wheel fit E12 - Remy Davison 06:31:26 01/07/04 (3)
  • Ditto the two previous answers. I made the swap.. - Tim in NC 16:05:30 01/07/04 (0)
  • steering wheel - yes - ...tom 06:54:41 01/07/04 (1)
    • contact Brian, Luvs the Old Schools on mye28 - Adam Wilson in Chicago 08:36:09 01/07/04 (0)
• 3.5 euro engine on the Bay - Bob in San Jose 01:07:56 01/07/04 (3)
  • I'm all over it. :-) (nt) - Jim Davis 12:58:37 01/07/04 (2)
    • Just received my eBay Euro - Misha 18:31:07 01/07/04 (1)
      • Re: Just received my eBay Euro - Jim Davis 18:56:42 01/07/04 (0)
• Need Ignition Switch and Key ASAP - Tom Masters 00:15:21 01/07/04 (0)
• Brian in Calgary.....Need to talk to you....Now! - Tom Masters 00:10:32 01/07/04 (0)
• M535i Project on eBay - Troy Rudolph 22:56:00 01/06/04 (6)
  • Hey, for 1,00 Euro, I'm in.... However>>> - Lars Olbimmerguy 23:01:04 01/06/04 (5)
    • I emailed seller about the VIN # - Adam Wilson in Chicago 08:30:56 01/07/04 (0)
    • Hey Lars! - mikey 23:36:05 01/06/04 (3)
      • Heck of a deal. Germany work or play..... - Lars 02:13:28 01/07/04 (2)
        • Re: Heck of a deal. Germany work or play..... - mikey 01:57:06 01/08/04 (1)
          • Friend has been shipping Citroens from all>>> - Lars Olbimmerguy 09:54:03 01/08/04 (0)
• Replacement of gas pedal - Will Ollison 18:51:43 01/06/04 (4)
  • Re: Replacement of gas pedal - Al from Oz 04:06:31 01/07/04 (0)
  • Re: Replacement of gas pedal - Jeff C 20:05:24 01/06/04 (2)
    • Re: Replacement of gas pedal - T.Han 22:53:59 01/06/04 (1)
      • Re: Replacement of gas pedal - Jeff C 20:18:59 01/07/04 (0)
• rust repair and how to change shock absorbers - christopher Blagonic 18:04:39 01/06/04 (1)
  • The Haynes Auto Repair Manual would be good , , , - Jeff (Atl) 08:34:18 01/07/04 (0)
• '79 528i with 9.6K miles only - Robert Knowlton 17:28:10 01/06/04 (1)
  • Re: '79 528i with 9.6K miles only - T.Han 23:01:38 01/06/04 (0)
• Diff repair kit - Leif 14:53:36 01/06/04 (1)
  • Nevermind, I saw it on the FAQ - Leif 14:59:13 01/06/04 (0)
• For sale Complete 85 3.5 motor w/ motronics - donniej 12:30:48 01/06/04 (2)
  • it was a great motor, the car... - ...tom 12:40:18 01/06/04 (1)
    • Re: it was a great motor, the car... - donniej 12:46:22 01/06/04 (0)
• speaking of San Diego... - Greg 10:48:45 01/06/04 (2)
  • Re: speaking of San Diego... - Jim Hineline 16:17:59 01/06/04 (0)
  • Re: speaking of San Diego... - newguyinold5er 13:10:36 01/06/04 (0)
• paging peter florence...... - newguyinol5er 10:00:19 01/06/04 (2)
  • Hey Jim... measurements? - Jeff C 20:07:34 01/06/04 (1)
    • Re: Hey Jim... measurements? - newguyinoldfiver 21:46:11 01/06/04 (0)
• Distributor Qs - ChuckNC 09:45:10 01/06/04 (2)
  • Re: Distributor Qs - Velocewest 17:38:50 01/06/04 (0)
  • Re: Distributor Qs - Chris Hollis, Huntsville, AL 10:27:28 01/06/04 (0)
• aaaaaaaaaaaa.....rant - newguyinoldfiver 22:36:11 01/05/04 (7)
  • Re: aaaaaaaaaaaa.....rant - Ryan Bryan 09:46:58 01/06/04 (3)
    • eBay 101: Make sure the seller uses Paypal - Mishast 12:51:40 01/06/04 (2)
      • Re: eBay 101: Make sure the seller uses Paypal - Suzdog 20:32:56 01/06/04 (1)
        • I agree on how pitiful Paypal is as a service. - Lars Olbimmerguy 10:47:45 01/07/04 (0)
  • Re: aaaaaaaaaaaa.....rant - Craig 23:05:37 01/05/04 (1)
    • craig.... - newguyinoldfiver 23:22:34 01/05/04 (0)
  • Re: aaaaaaaaaaaa.....rant - ChuckNC 23:02:54 01/05/04 (0)
• My 528 frustrations (LONG) - Daniel 22:21:14 01/05/04 (10)
  • what about the combo relay? - collins 17:20:19 01/06/04 (1)
    • Re: what about the combo relay? - Daniel 20:28:15 01/06/04 (0)
  • More info needed - Matt C 11:43:05 01/06/04 (1)
    • Re: More info needed - Daniel 20:20:46 01/06/04 (0)
  • Re: My 528 frustrations (LONG) - Matt C 11:39:54 01/06/04 (1)
    • Re: My 528 frustrations (LONG) - Daniel 20:26:12 01/06/04 (0)
  • Re: My 528 frustrations (LONG) - Don Daynes 09:20:12 01/06/04 (1)
    • Re: My 528 frustrations (LONG) - Daniel 11:13:50 01/06/04 (0)
  • some ideas and questions (image posted) - Peter Florance 04:39:32 01/06/04 (1)
    • Re: some ideas and questions (image posted) - Daniel 08:04:55 01/06/04 (0)
• 200% more Brake lighting (long) - Brian in Calgary 22:07:02 01/05/04 (4)
  • Re: 200% more Brake lighting (long) - Kaveman 12:51:03 01/07/04 (0)
  • Re: 200% more Brake lighting (long) - Walt Barie 07:19:25 01/07/04 (0)
  • Re: 200% more Brake lighting (long) - Tom Masters 16:54:23 01/06/04 (0)
  • This same mod is easily done on the 320i - preston in Spokane 15:05:23 01/06/04 (0)
• Head Repair by Welding - Michael K 18:43:56 01/05/04 (2)
  • I've had a couple done - Mike W. 20:06:25 01/05/04 (0)
  • I know it's possible, because - Velocewest 18:49:22 01/05/04 (0)
• Bilstein HD vs. Touring - Brian in Abilene 16:45:26 01/05/04 (12)
  • Thanks everybody, Jim hooked me up! (nt) - Brian in Abilene 11:54:18 01/06/04 (1)
    • Re: Thanks everybody, Jim hooked me up! (nt) - newguyinold5er 15:07:49 01/06/04 (0)
  • just a thought.... - newguyinoldfiver 22:15:20 01/05/04 (3)
    • question, Jim - Peter Florance 05:45:58 01/06/04 (1)
      • Re: question, Jim - newguyinoldfiver 09:06:27 01/06/04 (0)
    • Re: just a thought.... - Peter Florance 05:29:57 01/06/04 (0)
  • Re: Bilstein HD vs. Touring - Ryan Bryan 16:58:27 01/05/04 (5)
    • Re: Bilstein HD vs. Touring - KSBinVA 07:14:51 01/06/04 (4)
      • Re: Bilstein HD vs. Touring - Ryan Bryan 09:36:53 01/06/04 (3)
        • About the 16's, before you buy, make sure you.... - Blair 11:49:25 01/06/04 (2)
          • Thanks Ryan and Blair - KSBinVA 13:59:43 01/06/04 (1)
            • Re: Thanks Ryan and Blair - Ryan Bryan 14:10:05 01/06/04 (0)
• Momo Steering Wheel - Derek 16:24:59 01/05/04 (0)
• L-Jet Question - Troy Rudolph 15:17:46 01/05/04 (4)
  • Re: L-Jet Question - Nick 14:09:25 01/06/04 (1)
    • But how about with a new combo relay and... - Tulsa Dave 14:18:15 01/06/04 (0)
  • Re: L-Jet Question - Walt Barie 07:21:59 01/06/04 (1)
    • I've looked at the circuit and can't explain it... - Tulsa Dave 07:27:19 01/06/04 (0)
• Idle... - kav 03:29:33 01/05/04 (0)
• Steam and more steam - Medly 22:33:58 01/04/04 (7)
  • Re: Steam and more steam - ChuckNC 08:54:33 01/05/04 (4)
    • Do I have spyware!?!?!?! - ChuckNC 08:59:00 01/05/04 (3)
      • Download this! - Troy Rudolph 14:02:04 01/05/04 (1)
        • And this, too! - Troy Rudolph 14:04:54 01/05/04 (0)
      • i would say yes - Peter Florance 11:06:42 01/05/04 (0)
  • Re: Steam and more steam - mikey 08:43:02 01/05/04 (1)
    • Failing water pumps - peter c 12:58:51 01/06/04 (0)
• Sad Day for an M535I - Dave 13:12:06 01/04/04 (12)
  • Re: Sad Day for an M535I - Ryan Bryan 16:01:12 01/04/04 (0)
  • Hypothetical question.... - Lars OBG 14:51:04 01/04/04 (9)
    • I have another E12 M535I! - Dave 07:39:29 01/05/04 (3)
      • Re: I have another E12 M535I! - Bob Iverach 12:19:25 01/06/04 (2)
        • Re: I have another E12 M535I! - Dave 16:27:30 01/07/04 (1)
          • Re: I have another E12 M535I! - stephen mortimer 10:26:15 02/19/04 (0)
    • Hypothetical other question - Velocewest 20:14:30 01/04/04 (2)
      • Who Knows What Evil Lurks in the Hearts Of Men? - Lars Olbimmerguy 04:20:56 01/05/04 (1)
        • Some people have described my enthusiasm as - Velocewest 18:46:46 01/05/04 (0)
    • Re: Hypothetical question.... - Al from Oz 15:29:30 01/04/04 (1)
      • Great! Best of luck on the project and finding >> - Lars... 16:37:56 01/04/04 (0)
  • A nice warm bed and a soft pillow , , , , - Jeff (Atl) 13:31:43 01/04/04 (0)
• Good tech CD for E12 - Eric 11:30:33 01/04/04 (0)
• Cylinder Head Bolts - Eric 11:26:29 01/04/04 (2)
  • Not to worry - Mike W. 14:13:17 01/04/04 (0)
  • Re: Cylinder Head Bolts - Velocewest 12:08:22 01/04/04 (0)
• Vacuum Module - Randy Clark 10:20:48 01/04/04 (1)
  • Really dumb question - Mike W. 00:21:53 01/05/04 (0)
• BHP and TQ for 'Euro' 528i/628CSI? - Jeff Olson 07:05:46 01/04/04 (2)
  • Re: BHP and TQ for 'Euro' 528i/628CSI? - jerry kingman 19:06:45 01/05/04 (0)
  • 240Nm torque for 'Euro' 528i/628CSI - Remy Davison 05:34:28 01/05/04 (0)
• Paging Jeff C..... - Brian in Calgary 19:08:14 01/03/04 (10)
  • Sorry it took so long... (and this is long) - Jeff C 20:19:34 01/04/04 (5)
    • Thanks for the clarification - Brian in Calgary 22:35:36 01/04/04 (4)
      • A little more - Jeff C 10:38:06 01/05/04 (3)
        • A little more questions then - Brian in Calgary 22:00:17 01/05/04 (2)
          • Yes you are correct - Jeff C 20:13:10 01/06/04 (1)
            • Thanks Jeff..(nt) - Brian in Calgary 00:21:25 01/07/04 (0)
  • thoughts on close-ratio and short shifter - Adam Wilson in Chicago 19:20:21 01/03/04 (3)
    • I have a short shifter question - Ryan Bryan 11:10:31 01/04/04 (0)
    • I put the Bavarian Autosport kit on your old car.. - Tulsa Dave 10:49:54 01/04/04 (0)
    • Short shift kits - Russell 19:56:22 01/03/04 (0)
• was wood door trim only on us-spec e12s? - ...tom 18:14:48 01/03/04 (2)
  • I had wood trim on my original panels - Adam Wilson in Chicago 19:10:04 01/03/04 (1)
    • yep, parting rusty euro 530 from dover - ...tom 12:27:51 01/04/04 (0)
• how often do you see other E12's on the road?? - chrystobal65 14:29:09 01/03/04 (16)
  • About one per month in Austin (eom) - Troy Rudolph 16:37:45 01/05/04 (0)
  • only one in Juneau i know of.. mine. EOM - mikey 08:45:41 01/05/04 (0)
  • Only 3 or 4 a week - Mike W. 00:29:02 01/05/04 (0)
  • Kelowna, BC Canada, 100,000 people.... - Tom Masters 15:20:36 01/04/04 (4)
    • Hey. I love Kelowna.... I wandered through - Lars.... 16:41:40 01/04/04 (3)
      • Kelowna.... A great place to be... - Tom Masters 03:18:03 01/05/04 (2)
        • brrrr is right!! - Brian in Calgary 08:37:35 01/05/04 (1)
          • AHhhhhhh...nice and warm in Ga..70+ degrees... - Ryan Bryan 10:20:44 01/05/04 (0)
  • Population 50,000... known half dozen, Plus>> - Lars Olbimmerguy 14:57:11 01/04/04 (0)
  • Every day , , , , but then , , , - Jeff (Atl) 12:32:33 01/04/04 (3)
    • mechanics refuse to work on them - Jeff C 20:22:37 01/04/04 (2)
      • I can't - Mike W. 00:16:41 01/05/04 (1)
        • agreed. the 528i is indefatigable. nm - chrystobal65 01:49:51 01/07/04 (0)
  • I see Beamher Bobs... - Ryan Bryan 09:23:49 01/04/04 (0)
  • About once a month, or better. - John in Simi Valley 21:25:56 01/03/04 (0)
  • I've only seen two in our area.. - Timmer 16:44:33 01/03/04 (0)
• wreck repairs - ChuckNC 13:58:45 01/03/04 (0)
• how to remove aux. cooling fan - Steve Marburger 13:50:07 01/03/04 (2)
  • Re: how to remove aux. cooling fan - Robert Bondi 17:05:22 01/03/04 (0)
  • Re: how to remove aux. cooling fan - ChuckNC 14:04:27 01/03/04 (0)
• Motronic conversion i - Russell 11:09:05 01/03/04 (2)
  • Re: Motronic conversion i - Jeff C 20:26:20 01/04/04 (0)
  • Re: Motronic conversion i - Ryan Bryan 09:29:13 01/04/04 (0)
• 4 cyl 520i notes - Mark 05:53:48 01/03/04 (0)
• e12 528i sighted in Chattanooga, TN - Brian in Abilene 21:08:22 01/02/04 (1)
  • Re: e12 528i sighted in Chattanooga, TN - Lee Cornett 23:01:52 01/02/04 (0)
• Weak spots in the E28's - Billy Minder 18:38:54 01/02/04 (7)
  • E28 Metric Tyres - Dave 11:29:57 01/05/04 (0)
  • Same advice as always - John in Simi Valley 13:07:44 01/03/04 (0)
  • I'd say buy it (long) - Remy Davison 05:12:31 01/03/04 (0)
  • Compared to an E12... - Eric Q 03:58:54 01/03/04 (0)
  • Re: Weak spots in the E28's - mikey 02:55:48 01/03/04 (0)
  • Re: Weak spots in the E28's - Ryan Bryan 20:18:18 01/02/04 (1)
    • Re: Weak spots in the E28's - Lee Cornett 22:25:55 01/02/04 (0)
• couple items for sale...... - newguyinold5er 14:09:02 01/02/04 (2)
  • Close ratio is wanted -- Check email again. - Jeff C 17:39:12 01/02/04 (1)
    • Re: Close ratio is wanted -- Check email again. - newguyinoldfiver 20:21:36 01/02/04 (0)
• Unfinished conversion parts for sale - Art 14:06:57 01/02/04 (0)
• whose car is this? - billy in SLO 10:33:12 01/02/04 (0)
• Front strut question .. springs same for - Dave633 02:22:58 01/02/04 (3)
  • How about a good used set of lowering springs - Dave633 19:44:24 01/02/04 (0)
  • I think so... - Mike W. 16:35:47 01/02/04 (0)
  • Not sure, but doubtful... Six weight a lot more. - Lars Olbimmerguy 11:06:41 01/02/04 (0)
• FirstFives Rules Reminder: Please Read - Troy Rudolph (Webmaster) 18:24:23 01/01/04 (4)
  • Thanks, Troy, for running this site - Greg J 08:37:42 01/03/04 (3)
    • You're Welcome! - Troy Rudolph 16:13:07 01/03/04 (1)
      • Wilco! - Greg J 19:51:40 01/05/04 (0)
    • Re: Thanks, Troy, for running this site - Lee Cornett 11:03:00 01/03/04 (0)
• 530 on ebay! - rick 18:16:43 01/01/04 (4)
  • Funny It doesn't have reactors? NT - Matt C 19:28:16 01/01/04 (1)
    • Re: Funny It doesn't have reactors? NT - rick 20:47:40 01/01/04 (0)
  • Re: 530 on ebay! - rick 19:25:56 01/01/04 (1)
    • no, not at all. - Peter Florance - First Fives Dictator for Life 00:58:19 01/02/04 (0)
• Big Tail Light Problem... - Dan lafley 15:07:01 01/01/04 (3)
  • Re: Big Tail Light Problem... - Leonel Calix 12:20:20 02/11/04 (0)
  • Also, Use only OEM bulbs to assure the - Lars Olbimmerguy 18:42:35 01/01/04 (0)
  • check your bulb wattage - ...tom 15:16:21 01/01/04 (0)
• 4 speed question - Matt C 15:06:03 01/01/04 (0)
• Carbs and rebuild - Undercaste 05:02:09 01/01/04 (3)
  • Re: Carbs and rebuild - UNdercaste 17:02:01 01/01/04 (0)
  • Sorry, E12s only ... - Troy Rudolph (Webmaster) 12:59:07 01/01/04 (0)
  • Re: Carbs and rebuild - Jeff (Meridian) 06:52:37 01/01/04 (0)
• Budget 5 speed and more - Mike W. 01:15:16 01/01/04 (0)
• anyone need a dogleg 262..? (nt) - newguyinoldfiver 20:00:05 12/31/03 (1)
  • check email pls. (nt) - Jeff C 22:25:57 12/31/03 (0)
• diffy mount failure symptoms? - T-Raz 14:19:06 12/31/03 (4)
  • Re: diffy mount failure symptoms? - Bob/E12/6er 14:23:07 01/05/04 (0)
  • Re: diffy mount failure symptoms? - Ryan Bryan 16:31:51 12/31/03 (2)
    • Re: diffy mount failure symptoms? - T-Raz 17:39:48 12/31/03 (1)
      • driveshaft? - ...tom 18:55:50 12/31/03 (0)
• Archived! Archive XXXIII available soon. (eom) - Troy Rudolph (Webmaster) 12:18:35 12/31/03 (0)