Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XXXV

(2004/02/22 - 2004/04/04)

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• Anyone own a Bavaria or 3.0S? - Jeff Olson 08:40:55 04/04/04 (0)
• There's somthing missing... - Joel 06:57:07 04/04/04 (1)
  • Once in a while my life interferes with the site. - Troy Rudolph 10:57:02 04/04/04 (0)
• Velocewest...!!! Mellow's utility partner - Lars Olbimmerguy 01:15:37 04/04/04 (0)
• E12 Magazine Pics - Lee Cornett 00:31:58 04/04/04 (0)
• Hot RUN wire - Dan Lafley 00:18:00 04/04/04 (1)
  • Re: Hot RUN wire - Don Daynes 03:20:22 04/04/04 (0)
• I'm here to bash cheap E12 owners...in jest, NOT! - Jeff Olson 00:02:00 04/04/04 (3)
  • SOMEONE make me an offer! ANY offer... - Jeff Olson 10:37:58 04/04/04 (0)
  • FWIW: For the last three that I've bought... - Tulsa Dave 08:34:22 04/04/04 (0)
  • Seriously? $40? - trubey 01:45:27 04/04/04 (0)
• Paging Brian in Calgary, you have mail. (nt) - Medly 23:23:26 04/03/04 (0)
• FirstFives Engine Assembly FAQ? - Funf Dreisig 21:23:06 04/03/04 (3)
  • Re: FirstFives Engine Assembly FAQ? - Don Daynes 01:49:06 04/04/04 (0)
  • I've been thinking about doing one - Mike W. 22:18:10 04/03/04 (1)
    • Re: I've been thinking about doing one - Funf Dreisig 23:29:16 04/03/04 (0)
• Need 4 speed help(long but simple conclusion) - Matt C 20:52:35 04/03/04 (1)
  • Mine was tight - Funf Dreisig 21:57:50 04/03/04 (0)
• Rear Bilstein Hd's installed - Matt C 20:43:03 04/03/04 (1)
  • strut ring removal tip - Peter Florance 07:13:29 04/04/04 (0)
• Mystery coolant leak solved - peter claasen 20:38:19 04/03/04 (0)
• 5-Speed Trans Fluid - Gavin Gray 19:18:14 04/03/04 (3)
  • How many litres does the transmission hold? (nt) - Medly 22:59:52 04/03/04 (0)
  • Redline MTL .. - Troy Rudolph 22:01:49 04/03/04 (1)
    • Thanks! - Gavin 22:02:56 04/03/04 (0)
• Thanks Adam and Mike!!! - Gavin Gray 17:32:37 04/03/04 (2)
  • Yawn, woke up from my nap! Picture posted!! - Adam Wilson in Chicago 19:57:26 04/03/04 (0)
  • Re: Thanks Adam and Mike!!! - Mike in Chicago 18:37:39 04/03/04 (0)
• Rumors of e12 graveyard verified. (No Ivory tho) - Lars Olbimmerguy 10:22:51 04/03/04 (5)
  • Re: Rumors of e12 graveyard verified. (No Ivory tho) - Francois Gaignaux 07:35:12 04/04/04 (0)
  • Then I won't look for a spare line... - Mike W. 22:20:27 04/03/04 (0)
  • Re: Rumors of e12 graveyard verified. (No Ivory tho) - Martin 20:30:03 04/03/04 (1)
    • Not sure... obviously the car I got the line from - Lars 23:13:53 04/03/04 (0)
  • Re: Rumors of e12 graveyard verified. (No Ivory tho) - Velocewest 12:32:00 04/03/04 (0)
• new fuel pump- no start - gary in West Oz 07:43:47 04/03/04 (5)
  • is there a fuel filter?? - papajimmm nh 09:15:13 04/03/04 (0)
  • Re: new fuel pump- no start - Joel 09:12:55 04/03/04 (0)
  • fuel pump test - Peter Florance 08:09:35 04/03/04 (2)
    • Re: fuel pump test - gary in West OZ 00:51:39 04/04/04 (1)
      • Re: fuel pump test - Peter Florance 10:23:42 04/04/04 (0)
• my M535i divulges some more dirty little secrets - Adam Wilson in Chicago 07:13:41 04/03/04 (3)
  • Re: my M535i divulges some more dirty little secrets - Gavin Gray 07:40:32 04/03/04 (2)
    • I have a spare swaybar endlink - Adam Wilson in Chicago 07:44:01 04/03/04 (1)
      • I'll bring my camera - can't wait to see your car! - Gavin Gray 07:46:02 04/03/04 (0)
• More 'new' E12 road tests - Remy Davison 03:12:19 04/03/04 (0)
• Seatcovers in Oz - Damien in Sydney 21:59:21 04/02/04 (4)
  • Re: Seatcovers in Oz - Jim Hineline 09:14:07 04/03/04 (0)
  • How much're they charging? - Remy Davison 01:44:26 04/03/04 (2)
    • Re: How much're they charging? - Damien in Sydney 18:17:24 04/03/04 (1)
      • Re: How much're they charging? - Remy Davison 03:31:33 04/04/04 (0)
• Electrical question - Dan Lafley 18:39:25 04/02/04 (1)
  • Re: Electrical question - Karl in KS 22:40:37 04/02/04 (0)
• Anybody have a carfax subscription? - trubey 18:06:05 04/02/04 (1)
  • Here you go - Gavin Gray 18:14:17 04/03/04 (0)
• Part # needed - Daniel 17:06:00 04/02/04 (0)
• turbo charging - brian 11:47:19 04/02/04 (2)
  • Re: turbo charging - jim at da shop 12:33:29 04/02/04 (1)
    • Re: turbo charging - Mike In Chicago 16:01:18 04/02/04 (0)
• 3.5 l conversion question - brian in colorado 11:41:00 04/02/04 (5)
  • Re: 3.5 l conversion question - Karl in KS 22:45:48 04/02/04 (0)
  • Re: 3.5 l conversion question - trubey 17:35:23 04/02/04 (0)
  • Metris Mechanic - Daniel 15:10:55 04/02/04 (2)
    • Metric Mechanic*** NT - Daniel 15:11:31 04/02/04 (1)
      • Clarify for me.. - Matt C 20:12:35 04/02/04 (0)
• fuel injection hose replacement m30 528i 1979 2.5l - brian in colorado 11:37:22 04/02/04 (6)
  • Re: fuel injection hose replacement m30 528i 1979 2.5l - Peter Florance 15:06:04 04/02/04 (0)
  • Re: fuel injection hose replacement m30 528i 1979 2.5l - Ryan Bryan 13:42:27 04/02/04 (0)
  • The fuel hoses are press-fitted.... - Brian in Abilene 12:58:14 04/02/04 (3)
    • Re: The fuel hoses are press-fitted.... - Matt C 13:23:52 04/02/04 (2)
      • No problem, Matt. I didn't use a torch either - Brian in Abilene 13:27:42 04/02/04 (1)
        • Just did this a few weeks ago..... - Mike In Chicago 15:48:03 04/02/04 (0)
• Semi-OT: Need electrical system advice (long) - Brian in Abilene 07:55:19 04/02/04 (6)
  • 320i fuel pump relay - Peter Florance 15:01:08 04/02/04 (1)
    • Thanks, Peter...I'll look for one of those. (nt) - Brian in Abilene 15:55:46 04/02/04 (0)
  • Re: Semi-OT: Need electrical system advice (long) - Ryan Bryan 09:50:37 04/02/04 (3)
    • Re: Semi-OT: Need electrical system advice (long) - Brian in Abilene 10:33:31 04/02/04 (2)
      • Re: Semi-OT: Need electrical system advice (long) - Ryan Bryan 13:49:20 04/02/04 (1)
        • Good thought...I'll check that out as well... - Brian in Abilene 14:00:05 04/02/04 (0)
• Any m10 experts out there? - Daniel 21:20:52 04/01/04 (8)
  • Re: Any m10 experts out there? - Daniel 15:09:58 04/02/04 (0)
  • I'm not an expert, but I do know some - Mike W. 22:27:36 04/01/04 (6)
    • Re: I'm not an expert, but I do know some - Daniel 22:55:46 04/01/04 (5)
      • torque plate - Peter Florance 05:28:26 04/02/04 (0)
      • Re: I'm not an expert, but I do know some - Mike W. 00:04:45 04/02/04 (3)
        • Any Tips on my 92mm overbored M30? - Funf Dreisig 08:24:49 04/02/04 (0)
        • THIS is the site you want... - Mike E 00:45:05 04/02/04 (1)
          • Also checkout www.metricmechanic.com - Funf Dreisig 08:39:58 04/02/04 (0)
• Replacing wood trim above glove box - Barry Ritter 17:32:46 04/01/04 (3)
  • Re: Replacing wood trim above glove box - ChuckNC 09:02:45 04/02/04 (0)
  • It should be replaceable. (more) - Brian in Abilene 20:36:48 04/01/04 (1)
    • Yes, it does come off - Mike W. 22:32:05 04/01/04 (0)
• That nasty old rubber clutch hydraulic hose. - Lars Olbimmerguy 16:46:10 04/01/04 (6)
  • Re: That nasty old rubber clutch hydraulic hose. - Mike W. 22:35:49 04/01/04 (1)
    • probably about 14" long and the end that goes - Lars 11:16:07 04/02/04 (0)
  • brake hose + hardline - Peter Florance 17:01:08 04/01/04 (3)
    • Excellent... I will check the local NAPA - Lars 18:40:51 04/01/04 (2)
      • You could probably even find a short hardline - Velocewest 12:11:26 04/02/04 (0)
      • early e24 - Peter Florance 18:55:27 04/01/04 (0)
• This one looks genuine - Mike E 15:52:04 04/01/04 (2)
  • COTM - James C 18:14:28 04/01/04 (1)
    • looks like it - stewart in slc 19:35:09 04/01/04 (0)
• Beer night a sucess... - Bill Hynes 12:42:33 04/01/04 (4)
  • sure was! but why you gotta be showin' my rust! > - chrystobal65 15:00:51 04/01/04 (3)
    • at least my car was hidden by the darkness - papajimmm nh 18:18:36 04/01/04 (1)
      • .....the stealth candidate :) - chrystobal65 20:09:05 04/01/04 (0)
    • Sorry bout the rust ;-) - Bill Hynes 16:50:44 04/01/04 (0)
• '87 735i cam lift and duration? - KSBinVA 12:02:39 04/01/04 (2)
  • I think... - Mike W. 22:40:59 04/01/04 (1)
    • THanks - KSBinVA 12:45:50 04/02/04 (0)
• E12 euro bumper - Alex Anduze 07:57:38 04/01/04 (0)
• Aux Fan Switch - Dan Lafley 01:00:46 04/01/04 (2)
  • Re: Aux Fan Switch - Mike W. 22:43:41 04/01/04 (1)
    • Check the fuse? - trubey 17:47:06 04/02/04 (0)
• Man am I going to miss you guys...... - Brian in Calgary 22:13:06 03/31/04 (36)
  • ditto, i just sold my e12 and bought a - billy in SLO, CA 18:41:19 04/02/04 (1)
    • Sorry to hear you're going. - Al from Oz 04:25:25 04/03/04 (0)
  • Why not just buy a motorcycle for summer use? - Frank H 19:04:45 04/01/04 (3)
    • I thought of that but.... - Brian in Calgary 08:45:17 04/02/04 (2)
      • When do you normally head to the Gorge? - Frank H 20:17:16 04/02/04 (1)
        • August this year... - Brian in Calgary 10:23:36 04/04/04 (0)
  • Re: Man am I going to miss you guys...... - Ryan Bryan 09:40:04 04/01/04 (0)
  • Re: Man am I going to miss you guys...... - Ryan Bryan 09:30:54 04/01/04 (10)
    • ...even you RyanBryan..... - Brian in Calgary 11:52:00 04/01/04 (1)
      • Re: ...even you RyanBryan..... - Ryan Bryan 12:07:01 04/01/04 (0)
    • Ryan, I'm getting a visual on the sudden stop - Randy 76/530 09:57:42 04/01/04 (7)
      • Re: Ryan, I'm getting a visual on the sudden stop - Ryan Bryan 10:18:10 04/01/04 (6)
        • Ryan/all familiar w/ suspension question e30 - Randy 76/530 14:29:16 04/01/04 (1)
          • Re: Ryan/all familiar w/ suspension question e30 - Ryan Bryan 15:45:39 04/01/04 (0)
        • Wow...my e36 has been (knock on wood) bulletproof. - Brian in Abilene 11:39:08 04/01/04 (3)
          • Re: Wow...my e36 has been (knock on wood) bulletproof. - Ryan Bryan 11:54:10 04/01/04 (2)
            • Gotta agree with Ryan on the check control - Remy Davison 01:42:59 04/03/04 (0)
            • You're right... - Brian in Abilene 12:29:52 04/01/04 (0)
  • I just bought a e30 318is... - Randy 76/530 06:59:42 04/01/04 (5)
    • i like that car. it is on my short list >> - chrystobal65 14:57:35 04/01/04 (4)
      • Re: i like that car. it is on my short list >> - Randy 76/530 21:43:39 04/01/04 (3)
        • nice, nice, good call all around. and on your son> - chrystobal65 07:53:56 04/02/04 (2)
          • Re: nice, nice, good call all around. and on your - Randy 76/530 11:56:57 04/02/04 (1)
            • yeah that was more to share the talking heads> - chrystobal65 01:27:24 04/03/04 (0)
  • jeez, this really sucks to lose you - Adam Wilson in Chicago 06:29:32 04/01/04 (1)
    • Re: jeez, this really sucks to lose you - Brian in Calgary 12:33:36 04/01/04 (0)
  • if you have trouble selling the e12 - Peter Florance 05:16:09 04/01/04 (0)
  • I'd go for a 325e ( or preferably es) - Mike W. 23:18:40 03/31/04 (2)
    • I ran the numbers.... - Brian in Calgary 23:50:04 03/31/04 (1)
      • You car run your number again , , , , - Jeff (Atl) 08:13:46 04/01/04 (0)
  • Re: Man am I going to miss you guys...... - alex in edmtn 22:45:54 03/31/04 (0)
  • 318i would be my choice - Medly 22:43:54 03/31/04 (1)
    • I was thinking about you for the spoiler - Brian in Calgary 23:09:18 03/31/04 (0)
  • Find a Euro 520i... - Mike E 22:29:55 03/31/04 (2)
    • what about 520 vs 318i - Brian in Calgary 23:13:49 03/31/04 (1)
      • Re: what about 520 vs 318i - Mike E 23:56:12 03/31/04 (0)
• Paging Mike E (& others) from Melbourne, Oz - Mike from Melbourne 17:11:46 03/31/04 (1)
  • Re: Paging Mike E (& others) from Melbourne, Oz - Mike E 20:42:01 03/31/04 (0)
• Cooling - slow leak - advice to diagnose? - Peter C 12:14:20 03/31/04 (6)
  • Re: Cooling - slow leak - advice to diagnose? - Mike W. 23:22:47 03/31/04 (0)
  • Radiator... - Medly 22:49:21 03/31/04 (0)
  • Re: Cooling - slow leak - advice to diagnose? - Jeff (Atl) 22:39:30 03/31/04 (0)
  • Re: Cooling - slow leak - advice to diagnose? - Don Daynes 15:02:29 03/31/04 (0)
  • Heater adj valve? - Funf Dreisig 14:09:41 03/31/04 (0)
  • Re: Cooling - slow leak - advice to diagnose? - stewart in slc 13:21:43 03/31/04 (0)
• Skirts for sale on e-bay - Random_2002 11:40:33 03/31/04 (0)
• e28 bulletin board - Mike in Adelaide 04:28:00 03/31/04 (10)
  • Re: e28 bulletin board - Tony in Adelaide 00:18:56 04/04/04 (0)
  • Re: e28 bulletin board - Peter C 12:25:27 03/31/04 (0)
  • mye28.com it is..!!!!!!!!!!!!!!!!!!!!!!!!1 - jim at da shop 09:45:02 03/31/04 (0)
  • Got my eye on a 28 - Mike E 07:17:19 03/31/04 (5)
    • I don't think so. - Al from Oz 20:01:50 03/31/04 (2)
      • Where did you find the VIN? - Mike E 22:28:42 03/31/04 (1)
        • Re: Where did you find the VIN? - Al from Oz 05:24:18 04/01/04 (0)
    • Re: Got my eye on a 28 - Fred B 11:08:34 03/31/04 (1)
      • Re: Got my eye on a 28 - Mark 11:24:12 03/31/04 (0)
  • mye28.com - Peter Florance - First Fives Dictator for Life 05:33:03 03/31/04 (0)
• Lowering Spring from Europe - Zolka 03:43:46 03/31/04 (2)
  • Re: Lowering Spring from Europe - Niklas Edlund 04:01:55 03/31/04 (1)
    • Re: Lowering Spring from Europe - Zolka 01:16:38 04/01/04 (0)
• Mike from Oz (Melb) mail me-we should hook up - Remy Davison 21:44:44 03/30/04 (0)
• opinions on a 316.... - kav 16:57:46 03/30/04 (4)
  • Re: opinions on a 316.... - james 11:30:49 03/31/04 (0)
  • May want to look at 318is as alternative - Misha 11:20:02 03/31/04 (0)
  • Re: opinions on a 316.... - Eric Q 20:46:01 03/30/04 (1)
    • Re: opinions on a 316.... - Mark 11:16:45 03/31/04 (0)
• Cold start idle too high - Martin 11:33:44 03/30/04 (2)
  • How's your ignition timing? - Mike W. 23:35:56 03/30/04 (0)
  • Re: Cold start idle too high - KSBinVA 13:10:12 03/30/04 (0)
• Ignition Switch - b_hoves 05:15:12 03/30/04 (2)
  • Re: Ignition Switch - Peter Florance 06:27:52 03/30/04 (1)
    • Re: Ignition Switch - ChuckNC 09:32:24 03/30/04 (0)
• Engine for sale 3.5L - Jeff C 20:29:54 03/29/04 (8)
  • Re: Engine for sale 3.5L - Robert Bouknight 19:28:15 03/30/04 (0)
  • Re: Engine for sale 3.5L - James C 01:25:17 03/30/04 (1)
    • Thanks James, you are right -- Daniel check email - Jeff C 11:37:35 03/30/04 (0)
  • I thought the 3.5L was the Euro-218hp engine?? - Jeff (Atl) 22:42:10 03/29/04 (2)
    • Nope. US 3.5 and Euro 3.5L are different. beasts. - Misha 11:32:40 03/30/04 (1)
      • slight differnece? 182 or 186 vrs 218 (20%) - papajimmn nh 13:51:07 03/30/04 (0)
  • Re: Engine for sale 3.5L - Daniel 22:01:17 03/29/04 (1)
    • 3.5L=3.5Liter, not an "L" block.....NT - Blair 23:16:41 03/29/04 (0)
• Australian fuels for 528i - Mike from Oz 19:36:35 03/29/04 (6)
  • Re: Australian fuels for 528i - Al from Oz 20:42:03 03/29/04 (1)
    • My mechanic also threatened violence... - Mike E 07:08:39 03/30/04 (0)
  • I use BP Ultimate 98 - Mike E 19:52:29 03/29/04 (3)
    • Re: I use BP Ultimate 98 - Mike from Oz 20:13:38 03/30/04 (0)
    • Right, that I do - Remy Davison 21:52:10 03/29/04 (1)
      • Cheaper with your supermarket vouchers - Mike E 05:34:11 03/30/04 (0)
• Paging James C - Jeff C 14:57:49 03/29/04 (1)
  • Re: Paging James C - James C 20:44:27 03/29/04 (0)
• E12 Alpina gauge cluster - Francois Gaignaux 11:42:56 03/29/04 (1)
  • Re: E12 Alpina gauge cluster - andrey 15:43:07 03/29/04 (0)
• Torquing the Mains - Need advice (very long) - Funf Dreisig 10:04:14 03/29/04 (9)
  • Lack of Bearing Crush? (long) - Funf Dreisig 21:54:27 03/29/04 (4)
    • Re: Lack of Bearing Crush? (long) - Don Daynes 12:47:57 03/30/04 (3)
      • Thanks again Don... Thanks again Don... - Funf Dreisig 15:30:44 03/30/04 (0)
      • like this? (WOT) - Peter Florance 14:30:33 03/30/04 (1)
        • That's what I'm doing wrong.... - Funf Dreisig 17:08:51 03/30/04 (0)
  • Re: Torquing the Mains - Need advice (very long) - Don Daynes 11:38:22 03/29/04 (3)
    • Thanks for the advise Don. - Funf Dreisig 13:33:26 03/29/04 (2)
      • Re: Thanks for the advise Don. - Daniel 19:57:52 03/29/04 (1)
        • Thanks Daniel - Funf Dreisig 20:57:44 03/29/04 (0)
• O.K. Someone BUY this thing...E12 eBay stuff... - Jeff Olson 08:38:36 03/29/04 (1)
  • O.K. Jeff I bid on it. NT - Bob in San Jose 17:58:30 03/29/04 (0)
• Speaking of suspension... - Mike E 07:26:02 03/29/04 (3)
  • These are the parts... - Mike E 16:36:48 03/29/04 (2)
    • Boge - Peter Florance 06:58:28 03/30/04 (0)
    • we don't get these in the states, to my knowledge - marc79euro635 22:47:54 03/29/04 (0)
• PLEASE BUY MY CAR!!! (BELOW) NT - James Grant 05:30:44 03/29/04 (0)
• '74 525 for sale in brisbane - James Grant 05:30:04 03/29/04 (0)
• paging bill hynes for sky info!!! - chrystobal65 20:37:22 03/28/04 (10)
  • margarittas - papajimmm nh 07:18:13 03/31/04 (0)
  • Re: paging bill hynes for sky info!!! - Bill Hynes 11:38:59 03/29/04 (0)
  • where when you going for beer? - papajimmm nh 09:17:28 03/29/04 (7)
    • Re: where when you going for beer? - Bill Hynes 11:29:39 03/29/04 (6)
      • missed you guys tonight but tues. or weds > - chrystobal65 21:19:19 03/29/04 (5)
        • Re: missed you guys tonight but tues. or weds > - papajimmm nh 06:41:38 03/30/04 (4)
          • Works for me... - Bill Hynes 19:10:26 03/30/04 (3)
            • beer - papajimmm nh 19:25:03 03/30/04 (2)
              • Re: beer - Bill Hynes 20:37:26 03/30/04 (1)
                • chris you there? Margarettias - papajimmm nh 09:58:37 03/31/04 (0)
• 4 New bilsteins HD's on E-bay - Matt C 18:25:18 03/28/04 (3)
  • Will Tourings work w, shorter springs ? - Peter C 11:52:43 03/30/04 (0)
  • Re: 4 New bilsteins HD's on E-bay - Blair 02:30:55 03/29/04 (1)
    • Re: 4 New bilsteins HD's on E-bay - Jeff (Atl) 18:26:33 03/29/04 (0)
• Maximillan - jp 18:17:23 03/28/04 (2)
  • You can find them here... - Gavin 18:20:32 03/28/04 (1)
    • Re: You can find them here... - jp 18:26:53 03/28/04 (0)
• I GOT THE CAR - Gavin Gray 18:13:19 03/28/04 (4)
  • Alright! Another E12 in Chicago, how many is that? - Luke 17:02:56 03/29/04 (0)
  • congrats! just tuned up maxine satty...> - chrystobal65 20:42:24 03/28/04 (0)
  • Congrats! Always good to see an old friend again - Brian in Abilene 19:18:15 03/28/04 (1)
    • returned e12 : ) - Mark 03:36:35 03/29/04 (0)
• Paging Bill Hynes... - Matt C 17:18:41 03/28/04 (2)
  • Re: Paging Bill Hynes... - papajimmm nh 06:42:56 03/30/04 (0)
  • Re: Paging Bill Hynes... - Bill Hynes 11:41:18 03/29/04 (0)
• Door panels; Rear Quarters and Trunk Lid How hard - (More please read; opine)//jcsomerset '87 M6 12:06:59 03/28/04 (4)
  • Whole rust free roller cars available $500 or less - Lars Olbimmerguy 15:31:41 03/28/04 (3)
    • Re: Whole rust free roller cars available $500 or less - J Hewitt 16:57:39 03/29/04 (1)
      • Well, for starters, I posted one in the classified - Lars 17:42:45 03/31/04 (0)
    • Lars....you still watching out for .... - Brian in Calgary 22:55:10 03/28/04 (0)
• Rough idle - Joel 07:57:46 03/28/04 (1)
  • electrical most likely - Peter Florance 09:04:00 03/28/04 (0)
• 79 Euro.. points or Electronic? - Scott Schering 01:24:21 03/28/04 (1)
  • 79 Euro 535i N. Calif still for sale - Roger Howard 12:49:39 03/28/04 (0)
• Report on blue/'ultra-white' halogen globes (long) - Remy Davison 00:33:25 03/28/04 (0)
• Old safety questions, sort of OT - Daniel 00:03:18 03/28/04 (5)
  • I've had a couple of experiences - Mike W. 20:45:42 03/28/04 (0)
  • Luckily... - ChuckNC 08:44:53 03/28/04 (0)
  • Re: Old safety questions, sort of OT - Remy Davison 00:44:11 03/28/04 (0)
  • Personal experience... Great Crumple Zone>>> - Lars Olbimmerguy 00:43:07 03/28/04 (1)
    • Re: Personal experience... Great Crumple Zone>>> - Mark 03:15:15 03/28/04 (0)
• 1979 528i Owner's Handbook on eBay...MORE! - Jeff Olson 22:51:42 03/27/04 (0)
• brake caliper rebuilt questions - Paul 19:50:35 03/27/04 (5)
  • Re: brake caliper rebuilt questions - Peter Florance 09:02:26 03/28/04 (2)
    • Re: brake caliper rebuilt questions - paul 10:17:35 03/28/04 (1)
      • Re: brake caliper rebuilt questions - Peter Florance 11:48:26 03/28/04 (0)
  • Re: brake caliper rebuilt questions - ChuckNC 08:49:34 03/28/04 (1)
    • Re: brake caliper rebuilt questions - Velocewest 13:18:08 03/29/04 (0)
• Please ignore the message below (eom) - Troy Rudolph (Webmaster) 16:35:07 03/27/04 (0)
• - FirstFives.org 16:33:26 03/27/04 (0)
• how many headlights do you break a year? > - chrystobal65 16:15:51 03/27/04 (5)
  • Re: how many headlights do you break a year? > - Daniel 00:06:36 03/28/04 (2)
    • Hey Chris... - Bill Hynes 11:35:41 03/28/04 (1)
      • cool. check my post above for 5 planets. nm - chrystobal65 20:45:41 03/28/04 (0)
  • Two this year, but before that - Mike W. 21:10:10 03/27/04 (0)
  • Really? I've never broken one, might try putting.. - Blair 16:58:47 03/27/04 (0)
• Vintage BMW meet in May - Brian in Abilene 15:23:02 03/27/04 (5)
  • Meet is open to non-CCA folks...(more) - Brian in Abilene 21:17:10 03/29/04 (0)
  • Re: Vintage BMW meet in May - Brad In Texas 15:12:01 03/29/04 (0)
  • Re: Vintage BMW meet in May - Robert Bondi 04:31:18 03/28/04 (2)
    • Hope it was OK to link to the CCA website... - Brian in Abilene 08:37:33 03/28/04 (1)
      • Re: Hope it was OK to link to the CCA website... - Robert Bondi 11:50:51 03/28/04 (0)
• Anyone changed over to E28 lock motors? - Tulsa Dave 12:09:42 03/27/04 (1)
  • Re: Anyone changed over to E28 lock motors? - oilslick 15:08:35 03/27/04 (0)
• Tap Tap Tap. after valve adjust, please help - Eric Anderton 10:46:59 03/27/04 (5)
  • Re: Tap Tap Tap. after valve adjust, please help - Matt C 17:55:46 03/28/04 (0)
  • Dished valve top or rocker.....possible cause - Lars Olbimmerguy 16:26:44 03/27/04 (1)
    • Meant to say dial guage should confirm - Lars 16:28:39 03/27/04 (0)
  • Re: Tap Tap Tap. after valve adjust, please help - Karl in KS 15:36:11 03/27/04 (0)
  • Adjust them again - Mike W. 13:38:22 03/27/04 (0)
• Transmission Oil?....Brand name? - Canada Karl 09:29:39 03/27/04 (1)
  • Redline ... - Troy Rudolph 12:16:37 03/27/04 (0)
• new firstfives members? - Adam Wilson in Chicago 22:58:25 03/26/04 (2)
  • e12's on ebay - Bob in San Jose 00:28:56 03/27/04 (1)
    • Re: e12's on ebay - Mark 15:13:55 03/27/04 (0)
• Throttle linkage. - T.Han 22:13:33 03/26/04 (5)
  • Re: Throttle linkage. - Walt Barie 13:40:20 03/29/04 (0)
  • oh boy....... - Peter Florance 06:41:21 03/27/04 (3)
    • Re: oh boy....... - T.Han 10:57:50 03/27/04 (2)
      • yeah that's pretty much it - Peter Florance 19:39:06 03/28/04 (1)
        • take a look at a parts book under pedal linkage - andrey 23:00:27 03/28/04 (0)
• running into a board member in NH: priceless! > - chrystobal65 21:31:26 03/26/04 (2)
  • Sounds good to me, but... - Bill Hynes 09:26:27 03/27/04 (1)
    • tuned up maxine this a.m......1.5 newcastles, 1 > - chrystobal65 12:44:42 03/27/04 (0)
• Does anyone remember how... - Don Daynes 19:04:21 03/26/04 (6)
  • Send me your e-mail and I'll send the picture of , - Jeff (Atl) 23:54:59 03/26/04 (1)
    • I was just kidding...Thanks for the offer. - Don Daynes 01:59:24 03/27/04 (0)
  • Re: Does anyone remember how... - Kaveman 23:04:05 03/26/04 (0)
  • Re: Does anyone remember how... - T.Han 22:16:11 03/26/04 (0)
  • Re: Does anyone remember how... - Blair 20:09:47 03/26/04 (0)
  • Re: Does anyone remember how... - Blair 20:09:27 03/26/04 (0)
• Need someone to ship parts from Santa Ana - Jess Hewitt 16:32:36 03/26/04 (0)
• do not click on 3 messages below 'Alpina Wheels' - Peter Florance - First Fives Dictator for Life 07:07:15 03/26/04 (1)
  • 7" low beam headlights - John Lucas 20:44:31 03/27/04 (0)
• Engine guy needs suspension help - Matt C 06:43:37 03/26/04 (4)
  • Re: Engine guy needs suspension help - Peter Florance 13:23:56 03/26/04 (2)
    • Re: Engine guy needs suspension help - Matt C 15:37:57 03/26/04 (1)
      • Rears are a piece of cake....(long) - Brian in Calgary 23:26:34 03/26/04 (0)
  • Re: Engine guy needs suspension help - Velocewest 12:15:44 03/26/04 (0)
• Alpina Wheels? - Gavin Gray 06:42:57 03/26/04 (6)
  • Re: Alpina Wheels? - Fred B. 00:49:48 03/27/04 (0)
  • Re: Alpina Wheels? - Velocewest 12:18:19 03/26/04 (0)
  • Re: Alpina Wheels? - Nick in Folsom, CA 11:20:29 03/26/04 (2)
    • WOW. Ok, so... - Gavin Gray 14:09:48 03/26/04 (1)
      • Sometimes... - Eric Q 03:18:48 03/27/04 (0)
  • Ebay.de or KSK Distributors - Misha 10:34:57 03/26/04 (0)
• - fioricet 06:32:11 03/26/04 (0)
• - soma 06:32:11 03/26/04 (0)
• - job interview questions tips 06:32:05 03/26/04 (0)
• ATTN:Will Ollison - matt 04:41:28 03/26/04 (1)
  • Re: ATTN:Will Ollison - Will Ollison 09:20:29 03/26/04 (0)
• spark plugs - Daniel Smith 03:58:54 03/26/04 (2)
  • Re: spark plugs - Peter Florance 06:04:01 03/26/04 (1)
    • Re: spark plugs - Klaus 07:34:16 03/27/04 (0)
• Wet Carpet! - Dan Lafley 22:18:51 03/25/04 (9)
  • Re: Wet Carpet! - Randy Clark 11:44:44 03/28/04 (0)
  • Re: Wet Carpet! - T.Han 22:05:57 03/26/04 (0)
  • Re: Wet Carpet! - Ryan Bryan 14:18:01 03/26/04 (0)
  • Sunroof - Mike W. 23:34:01 03/25/04 (5)
    • its not the sunroof... - Dan Lafley 01:03:20 03/26/04 (4)
      • Door Rubber, Drains?... - Dave D 06:14:47 03/26/04 (0)
      • been in the door recently - Peter Florance 06:07:01 03/26/04 (2)
        • Re: been in the door recently - james 14:46:12 03/26/04 (1)
          • Maybe replace trunk seal - Remy Davison 01:06:49 03/28/04 (0)
• E12 Alpina 533i, '73 520 road tests up - Remy Davison 21:51:13 03/25/04 (8)
  • Re: E12 Alpina 533i, '73 520 road tests up - Niklas Edlund 05:08:29 03/30/04 (0)
  • I could mirror this for you... - Mike E 23:17:30 03/25/04 (1)
    • dig it. i have to wait until tomorrow to read! :( - chrystobal65 23:26:29 03/25/04 (0)
  • thanks for the 520i test! - Mike E 23:05:17 03/25/04 (4)
    • Although... - Mike E 04:42:11 03/26/04 (3)
      • Re: Although... - Mark 09:04:47 03/26/04 (2)
        • Tuned and tested last night - Mike E 16:18:50 03/26/04 (1)
          • Re: Tuned and tested last night - Mark 14:27:28 03/27/04 (0)
• paging Funf to the red courtesy phone - Peter Florance 21:25:18 03/25/04 (3)
  • Got it - Thanks Peter - Funf Dreisig 23:27:07 03/25/04 (2)
    • change rod? - Peter Florance 06:11:54 03/26/04 (1)
      • Re: change rod? - Funf Dreisig 07:16:42 03/26/04 (0)
• Power Steering Filters on eBay - Troy Rudolph 21:01:16 03/25/04 (3)
  • Re: Power Steering Filters on eBay - lou in denver 09:23:47 03/26/04 (0)
  • Re: Power Steering Filters on eBay - Brian in Calgary 21:03:25 03/25/04 (1)
    • Re: Power Steering Filters on eBay - Troy Rudolph 21:59:49 03/25/04 (0)
• HEY John in Simi Valley - Jeff C 20:12:41 03/25/04 (0)
• service - Jim Alen 17:46:46 03/25/04 (4)
  • Re: service - jim at da shop 18:12:06 03/25/04 (3)
    • Most places charge book time - Sam SChultz 19:43:20 03/25/04 (2)
      • Re: Most places charge book time - Jim Alen 22:02:26 03/25/04 (1)
        • Faster yes but you have to pay for all that stuff - Sam SChultz 18:39:48 03/26/04 (0)
• What a difference a cat makes! - Peter C 15:50:36 03/25/04 (11)
  • Both of my e12s passed Ca. emissions with no prob. - Bob in San Jose 02:34:07 03/26/04 (3)
    • mileage? - Peter Florance 06:02:28 03/26/04 (2)
      • Re: mileage? - Bob in San Jose 13:55:13 03/26/04 (0)
      • Smog testing - Don Daynes 09:59:12 03/26/04 (0)
  • If I have to get a new cat I'll - Mike W. 23:25:49 03/25/04 (0)
  • no smog worries for us - greghill 22:48:10 03/25/04 (0)
  • Re: What a difference a cat makes! - Craig in Davis 16:18:37 03/25/04 (4)
    • Central Valley woes - PeterC 18:19:29 03/25/04 (0)
    • Re: What a difference a cat makes! - Jim Alen 17:32:24 03/25/04 (2)
      • Mesa - Peter 18:13:01 03/25/04 (1)
        • picture? - Peter Florance - First Fives Dictator for Life 06:09:41 03/26/04 (0)
• Paging Troy - Misha 14:55:49 03/25/04 (1)
  • cotm - Troy Rudolph 19:07:19 03/25/04 (0)
• 3.64lsd - jim at da shop 12:20:29 03/25/04 (3)
  • It's gone, he sold it all ready :( - Velocewest 12:51:08 03/25/04 (0)
  • Re: 3.64lsd - jim at da shop 12:48:41 03/25/04 (1)
    • Re: 3.64lsd - Blair 13:23:21 03/25/04 (0)
• A/C hose source? - rasmusst0042@yahoo.com 10:38:39 03/25/04 (2)
  • Re: A/C hose source? - Don Daynes 11:55:02 03/25/04 (0)
  • Try local - - joe 11:43:49 03/25/04 (0)
• Alpina B7 instruments - Kent 04:18:40 03/25/04 (4)
  • That's a pretty hard thing to find - Frank H 11:19:22 03/25/04 (3)
    • Re: That's a pretty hard thing to find - Adam Wilson in Chicago 21:52:46 03/25/04 (2)
      • Re: That's a pretty hard thing to find - Jim Alen 22:07:47 03/25/04 (1)
        • Re: That's a pretty hard thing to find - Kent 07:48:09 03/26/04 (0)
• 528i on Craigslist no affiliation $600 - Craig in Davis 23:29:49 03/24/04 (3)
  • Ok...nice car...what's wrong with it? - Brian in Calgary 20:56:34 03/25/04 (0)
  • Looks like a great deal - Misha 12:09:07 03/25/04 (1)
    • fair to say i've never been so bummed about $600> - chrystobal65 18:47:17 03/25/04 (0)
• Tech Specs on rods for E28 533i after 01/84? - Funf Dreisig 22:36:08 03/24/04 (6)
  • Or 1502-2002Tii, 5' E28, 6' E24 or 7' E23 - Funf Dreisig 14:35:34 03/25/04 (0)
  • Re: Tech Specs on rods for E28 533i after 01/84? - Peter Florance 06:30:18 03/25/04 (4)
    • Thanks for the offer Peter but... - Funf Dreisig 07:54:49 03/25/04 (3)
      • parts fiche - Peter Florance 08:04:21 03/25/04 (2)
        • Please do - Funf Dreisig 09:27:41 03/25/04 (1)
          • Re: Please do - Peter Florance 10:10:19 03/25/04 (0)
• E30 w/ 4.4L V8 - Troy Rudolph 22:24:39 03/24/04 (6)
  • I just happen to know where there's a spare E12 - Brian in Abilene 22:31:10 03/24/04 (5)
    • I think I'd still like to see a V12 in an E12... - Nick in Denver 09:40:34 03/25/04 (4)
      • Re: I think I'd still like to see a V12 in an E12... - Nick in Folsom, CA 13:45:11 03/26/04 (0)
      • Re: I think I'd still like to see a V12 in an E12... - Troy Rudolph 19:19:54 03/25/04 (1)
        • I agree... - Tulsa Dave 12:47:24 03/26/04 (0)
      • Re: I think I'd still like to see a V12 in an E12... - Mark 10:45:02 03/25/04 (0)
• save this 1980 in north mass. area: - chrystobal65 22:15:23 03/24/04 (2)
  • been there a while and compared to above - papajimmm nh 08:31:47 03/25/04 (1)
    • you got that right. give a shout next time> - chrystobal65 18:49:09 03/25/04 (0)
• in a Vacuum - Mike E 22:12:49 03/24/04 (1)
  • Re: in a Vacuum - Velocewest 22:24:30 03/24/04 (0)
• fuel tank replacement (repost) - matt 19:54:25 03/24/04 (2)
  • Re: fuel tank replacement (repost) - Peter Florance 06:04:59 03/25/04 (1)
    • Re: fuel tank replacement (repost) - matt 19:56:26 03/25/04 (0)
• Instrument cluster fluster - Russell 19:21:48 03/24/04 (5)
  • Re: Instrument cluster fluster - Peter Florance 19:31:58 03/24/04 (4)
    • cable attached - Russell 20:00:33 03/24/04 (3)
      • Re: cable attached - Karl in KS 23:21:30 03/24/04 (1)
        • Re: cable attached - greghill 00:55:20 03/25/04 (0)
      • Re: cable attached - Peter Florance 20:55:40 03/24/04 (0)
• My old (and new hopefully) 528 - Gavin Gray 18:38:58 03/24/04 (13)
  • that's a beauty. i have some questions for you > - chrystobal65 06:55:03 03/25/04 (7)
    • Re: that's a beauty. i have some questions for you > - Gavin gray 12:44:14 03/25/04 (6)
      • ummm WHAT!!??? You live in Chicago??? - Adam Wilson in Chicago 21:57:31 03/25/04 (2)
        • Thanks - I will... - Gavin Gray 22:10:38 03/25/04 (1)
          • no doubt, that's what it's all about! i know > - chrystobal65 22:50:32 03/25/04 (0)
      • yeah, it doesn't *HAVE* to be a tii but > - chrystobal65 18:56:40 03/25/04 (2)
        • crystobal...are you looking for a mirror? email me - Brian in Calgary 21:02:10 03/25/04 (0)
        • Re: yeah, it doesn't *HAVE* to be a tii but > - Gavin Gray 19:07:18 03/25/04 (0)
  • Gavin, welcome back - Peter Florance - First Fives Dictator for Life 05:58:01 03/25/04 (1)
    • Re: Gavin, welcome back - Gavin Gray 12:47:50 03/25/04 (0)
  • Re: My old (and new hopefully) 528 - Mark 04:37:27 03/25/04 (2)
    • Re: My old (and new hopefully) 528 - Gavin Gray 05:51:52 03/25/04 (1)
      • Re: My old (and new hopefully) 528 - Mark 07:53:05 03/25/04 (0)
• paging Scott Schering - rami 14:45:06 03/24/04 (3)
  • The car (bumpers) are worth more than asking - Lars Olbimmerguy 07:23:13 03/25/04 (0)
  • Re: paging Scott Schering - Scott Schering 23:05:32 03/24/04 (0)
  • euro bumpers - Roger Howard 15:41:21 03/24/04 (0)
• cams - peter mooney 12:36:02 03/24/04 (2)
  • Re: cams - jim at da shop 16:56:44 03/24/04 (1)
    • Re: cams - Thanks Jim!! - NFM - peter mooney 19:18:14 03/24/04 (0)
• ARRRGH... FS 1980 528i, 5 speed, brazilbraun - Nick in Folsom, CA 11:48:49 03/24/04 (9)
  • didn't this just change hands about 2 mnths ago? - Adam Wilson in Chicago 20:53:08 03/24/04 (2)
    • Re: didn't this just change hands about 2 mnths ago? - Nick in Folsom, CA 09:49:50 03/25/04 (0)
    • Yeah, but he beat me to it... - Eric Q 21:25:27 03/24/04 (0)
  • Sure would look good towing the boat.... - Dave D 15:51:32 03/24/04 (1)
    • Re: Sure would look good towing the boat.... - Nick in Folsom, CA 17:17:03 03/24/04 (0)
  • Pictures... - joe 14:42:08 03/24/04 (1)
    • Re: Pictures... - Nick in Folsom, CA 17:13:46 03/24/04 (0)
  • WOW, the price on my Euro 535i is now lowered. - Roger Howard 14:13:53 03/24/04 (0)
  • ARRRGH... is right. That's sweet! - Velocewest 11:53:37 03/24/04 (0)
• Needed: Driver Side Front Turn Signal Assembly - Misha 11:09:40 03/24/04 (2)
  • I have 1 Misha, must check to see if xlent. - billy in SLO 11:24:02 03/24/04 (1)
    • Billy: Sent you email NT - Misha 12:02:55 03/25/04 (0)
• Euro-spec 79 535i, PRICE REDUCED FOR QUICK SALE - Roger Howard 10:59:44 03/24/04 (0)
• just bought a 1981 528i - Matt 07:59:45 03/24/04 (5)
  • Re: just bought a 1981 528i - Will Ollison 10:05:32 03/25/04 (0)
  • Re: just bought a 1981 528i - Matt 16:42:02 03/24/04 (0)
  • another thought - Ryan Bryan 10:26:23 03/24/04 (0)
  • Re: just bought a 1981 528i - ChuckNC 08:49:14 03/24/04 (0)
  • Re: just bought a 1981 528i - Ryan Bryan 08:37:24 03/24/04 (0)
• - levitra 02:41:14 03/24/04 (0)
• - cialis 02:41:12 03/24/04 (0)
• '74 525 FOR SALE IN BRISBANE - James Grant 22:54:32 03/23/04 (0)
• Paging Matt B - James Grant 22:53:38 03/23/04 (1)
  • Will try this weekend if I get a chance NT - Matt B 08:04:43 03/24/04 (0)
• 79 Euro 525 F.S. it has to go!! plus free stuff - Scott Schering 22:44:03 03/23/04 (4)
  • Ahh! It's Sierra! My E24's twin! - Velocewest 11:50:12 03/24/04 (2)
    • Re: Ahh! It's Sierra! My E24's twin! - Frank H 13:43:38 03/24/04 (0)
    • Sorry... I think you must... I always fantasized>> - Lars Olbimmerguy 13:16:06 03/24/04 (0)
  • I forgot 1 thing, the shop manual - Scott Schering 22:47:29 03/23/04 (0)
• Wheel sizes for various BMW models - Michael Randell 21:19:13 03/23/04 (2)
  • Re: Wheel sizes for various BMW models - Mike from Oz 19:41:22 03/29/04 (0)
  • Wheels and seats - Mike W. 00:08:59 03/24/04 (0)
• OMG.... cant get my m535i this summer - Rami 20:51:50 03/23/04 (2)
  • Re: OMG.... cant get my m535i this summer - Luke 13:59:36 03/24/04 (1)
    • Re: OMG.... cant get my m535i this summer - rami 14:47:46 03/24/04 (0)
• More pics of M30 3.5L for my baby - Sam Schultz 19:56:07 03/23/04 (0)
• OT: Did you guys see this (new 1 series) - Gavin Gray 17:40:39 03/23/04 (2)
  • Re: OT: Did you guys see this (new 1 series) - Mark 04:05:30 03/24/04 (1)
    • Can't believe you remember! - Gavin Gray 18:18:55 03/24/04 (0)
• CG-Lock Reviewed - Peter Florance - First Fives Dictator for Life 17:18:00 03/23/04 (0)
• Thanks for the engine swap ideas but i have made - Rami 11:33:15 03/23/04 (2)
  • m106 will come cloe to bolting straight in. - Nick in Denver 21:23:58 03/23/04 (0)
• Removing trim from trunk lid - Brad In Texas 08:59:20 03/23/04 (12)
  • On the trim with the prongs... - Lars Olbimmerguy 15:53:17 03/23/04 (0)
  • Son, floss your trim - Russell 15:12:48 03/23/04 (2)
    • Mine has 4 prongs going into the sheetmetal.... - Eddie in TO 15:36:53 03/23/04 (1)
      • oh, and it's an 1980 model..(nt) - Eddie in TO 15:38:35 03/23/04 (0)
  • Re: Removing trim from trunk lid - Russell 15:11:18 03/23/04 (0)
  • Pry carefully is what I did... - Brian in Abilene 09:43:45 03/23/04 (5)
    • Brian, to rea attach the 528, try - Blair 15:42:39 03/23/04 (4)
      • Thanks, Blair...(more) - Brian in Abilene 16:32:40 03/23/04 (3)
        • Re: Thanks, Blair...(more) - Blair 17:16:41 03/23/04 (2)
          • Just pulled my 530i badge off over the weekend... - Mike in Chicago 09:03:24 03/24/04 (1)
            • Mike....what about the TURBO???? - Brian in Calgary 13:04:26 03/25/04 (0)
  • Pry very carefully..... - Eddie in TO 09:41:51 03/23/04 (0)
• M30 +.001" oversized rod bearings available ? - Funf Dreisig 08:08:45 03/23/04 (3)
  • Well DUH... - Funf Dreisig 11:36:03 03/23/04 (0)
  • Re: M30 +.001" oversized rod bearings available ? - Frank H 09:01:25 03/23/04 (1)
    • Re: M30 +.001" oversized rod bearings available ? - Funf Dreisig 10:22:20 03/23/04 (0)
• Front Spoiler - Daniel Smith 04:23:21 03/23/04 (3)
  • Re: Front Spoiler - Eddie in TO 10:44:08 03/23/04 (2)
    • The Alpina one only ships to Germany - Derek 13:16:40 03/23/04 (1)
      • Re: The Alpina one only ships to Germany - Francois Gaignaux 16:00:02 03/23/04 (0)
• Windows Longhorn Build Alpha 4053 *Download* - cool_dude 03:50:26 03/23/04 (1)
  • complaint sent to rogers. com - spam slammer 07:56:29 03/23/04 (0)
• Fan Switches - Dan Lafley 00:23:47 03/23/04 (1)
  • Depends on the year - Mike W. 00:30:28 03/23/04 (0)
• Advice on a 1980 528 - sean 22:44:13 03/22/04 (2)
  • Bulletproof is more accurate than reliable - Mike W. 00:27:51 03/23/04 (0)
  • Check the technical FAQ's - Daniel 22:46:46 03/22/04 (0)
• Washing the Seat covers on the Bavarian Mold Wagon - Scott Schering 17:32:05 03/22/04 (4)
  • Re: Washing the Seat covers on the Bavarian Mold W - T.Han 20:20:50 03/22/04 (2)
    • Re: Washing the Seat covers on the Bavarian Mold W - Scott Schering 13:43:49 03/23/04 (0)
    • ditto - Karl in KS 20:42:06 03/22/04 (0)
  • Are you sure its foam? - Mike E 19:00:37 03/22/04 (0)
• WTB: sunroof parts - Daniel 16:42:36 03/22/04 (2)
  • Re: WTB: sunroof parts - Tom Masters 01:15:40 03/23/04 (1)
    • Re: WTB: sunroof parts - Daniel 20:14:36 03/23/04 (0)
• Is there any way to put a 4.9 m5 v8 into a e12 - Rami 16:30:13 03/22/04 (15)
  • Re: Is there any way to put a 4.9 m5 v8 into a e12 - Troy Rudolph 21:17:29 03/22/04 (1)
    • I took some careful measurements... - Tulsa Dave 07:03:28 03/23/04 (0)
  • Anything can be done... - Mike E 16:52:22 03/22/04 (1)
    • It's an E28 - Troy Rudolph 21:07:05 03/22/04 (0)
  • Re: Is there any way to put a 4.9 m5 v8 into a e12 - Blair 16:38:28 03/22/04 (10)
    • Re: Is there any way to put a 4.9 m5 v8 into a e12 - peter mooney 20:49:31 03/22/04 (0)
    • If you're determined to have a V8... - Velocewest 16:58:48 03/22/04 (8)
      • 6 is enough? - Mark 07:36:21 03/23/04 (7)
        • Rack versus box - peter mooney 20:29:03 03/23/04 (2)
          • Re: Rack versus box - Troy Rudolph 22:39:14 03/23/04 (1)
            • Re: Rack versus box - peter mooney 09:57:21 03/24/04 (0)
        • Re: 6 is enough? - Eduardo 09:06:52 03/23/04 (3)
          • Hey Eduardo, read this! - Nick in Denver 09:32:38 03/23/04 (2)
            • Wrong Wrong Wrong - TCD 10:53:07 03/23/04 (1)
              • still, 335bhp isn't anything to cry about... - Nick in Denver 21:20:01 03/23/04 (0)
• Coolant leak - T.Han 16:18:23 03/22/04 (3)
  • Monitor coolant & oil extremely carefully - Funf Dreisig 21:55:21 03/22/04 (1)
    • Re: Monitor coolant & oil extremely carefully - T.Han 01:43:46 03/23/04 (0)
  • Re: Coolant leak - Jeff (Atl) 19:01:27 03/22/04 (0)
• How about a favicon for Firstfives? - Luke 15:31:35 03/22/04 (5)
  • hmmm... - Peter Florance - First Fives Dictator for Life 21:03:21 03/22/04 (4)
    • Not much ... - Troy Rudolph 21:49:02 03/22/04 (3)
      • BMW's Favicon - Scott Schering 00:26:25 03/23/04 (0)
      • how about just 'E12'? - Peter Florance 22:24:02 03/22/04 (1)
        • 'E12' does fit! - Luke 11:20:52 03/23/04 (0)
• Traveling to the High Desert Tuesday - Jeff C 14:10:02 03/22/04 (1)
  • Dang, didn't know . . . - John in Simi Valley 13:44:30 03/25/04 (0)
• Every day I thank you all - Jeff C 14:05:28 03/22/04 (2)
  • Jeff, that does sound sleazy..... - Adam Wilson in Chicago 20:31:29 03/22/04 (1)
    • Well said, gentlemen. - Jeff (Atl) 20:46:00 03/22/04 (0)
• flooding condition. - Chris Barnard 11:58:14 03/22/04 (0)
• Question about US bumpers - Rami 11:57:02 03/22/04 (5)
  • another approach - Karl in KS 20:54:14 03/22/04 (1)
    • My BMW Repair Manual must be missing a few pages - Funf Dreisig 22:15:02 03/22/04 (0)
  • Re: Question about US bumpers - Eddie in TO 12:23:41 03/22/04 (0)
  • Re: Question about US bumpers - Roger Howard 12:15:57 03/22/04 (1)
    • Re: Question about US bumpers - Blair 13:53:18 03/22/04 (0)
• Wheel and tire size question. - Bill Hynes 10:39:34 03/22/04 (3)
  • Re: Wheel and tire size question. - Velocewest 11:19:59 03/22/04 (2)
    • Thanks...........nt - Bill Hynes 11:45:11 03/22/04 (0)
    • Thanks...........nt - Bill Hynes 11:45:05 03/22/04 (0)
• Weekend notes - ChuckNC 10:18:59 03/22/04 (0)
• Fuel Economy - Daniel Smith 06:31:07 03/22/04 (9)
  • 14mpg - too rich? - Remy Davison 18:28:32 03/22/04 (1)
    • Fuel economy - Daniel Smith 04:13:46 03/23/04 (0)
  • If my conversion is correct... - Brian in Abilene 11:11:19 03/22/04 (0)
  • Re: Fuel Economy - Brian in Calgary 08:56:44 03/22/04 (5)
    • Maybe the 5 spd will make the difference - Brian in Calgary 23:55:44 03/22/04 (2)
      • I know where there are two REAL minicoopers 4sale - Lars Olbimmerguy 17:04:01 03/23/04 (0)
      • Re: Maybe the 5 spd will make the difference - Canada Karl 06:59:12 03/23/04 (0)
    • different sized tanks? are we all talking - Blair 11:39:27 03/22/04 (1)
      • me too - chris 13:25:05 03/22/04 (0)
• Centerpiece wheel covers for 76 530i alloy wheels. - Canada Karl 06:06:11 03/22/04 (0)
• Headlight mini wipers????? - Canada Karl 06:00:44 03/22/04 (10)
  • Re: Headlight mini wipers????? - Ryan Bryan 09:08:50 03/22/04 (9)
    • Euro option - Velocewest 11:30:57 03/22/04 (8)
      • Re: Euro option - Ryan Bryan 13:01:04 03/22/04 (7)
        • hahaha...I was thinking of joining the bidding war - Eddie in TO 17:15:50 03/22/04 (2)
          • Re: hahaha...I was thinking of joining the bidding war - Ryan Bryan 18:07:10 03/22/04 (1)
            • Re: hahaha...I was thinking of joining the bidding war - Bobby Wobby 18:14:00 03/22/04 (0)
        • Re: Euro option - Canada Karl 17:04:19 03/22/04 (3)
          • Re: Euro option - mitch 22:38:59 03/22/04 (1)
            • Funny that everyone mentions the "Flat Euro" - Velocewest 00:33:41 03/23/04 (0)
          • not a US option, but someone may have added.... - Adam Wilson in Chicago 20:33:06 03/22/04 (0)
• Leather seat crack repair.... - Canada Karl 05:55:46 03/22/04 (2)
  • Leatherique - Peter Florance 08:43:52 03/23/04 (0)
  • Re: Leather seat crack repair.... - Daniel 16:38:00 03/22/04 (0)
• Ah HA! Darn relay! - mike emmett 00:37:37 03/22/04 (1)
  • While I was at it... - mike e 03:23:39 03/22/04 (0)
• Fuse size, rating ??? - kendrick 22:36:55 03/21/04 (4)
  • Re: Fuse size, rating ??? - kendrick 12:17:50 03/22/04 (2)
    • Re: Fuse size, rating ??? - kendrick 19:15:12 03/23/04 (0)
    • Re: Fuse size, rating ??? - Peter Florance 22:22:59 03/22/04 (0)
  • Re: Fuse size, rating ??? - Peter Florance 05:41:12 03/22/04 (0)
• autoX's today - Peter Florance 20:36:59 03/21/04 (2)
  • Re: autoX's today - Karl in KS 20:59:21 03/22/04 (1)
    • Re: autoX's today - Peter Florance 07:57:36 03/23/04 (0)
• E12 Euro 535i, converted from 1980 M635i - Roger Howard 17:40:18 03/21/04 (7)
  • Re: E12 Euro 535i for sale....owner response - Roger Howard 12:07:30 03/22/04 (0)
  • I believe this is the same car I mention below nt - Adam Wilson in Chicago 21:46:17 03/21/04 (0)
  • Re: E12 Euro 535i, converted from 1980 M635i - Lee Cornett 18:50:59 03/21/04 (4)
    • Yes, there was a 1980 M635 - Remy Davison 20:12:13 03/21/04 (2)
      • Bit more info on the E12-based M635i - Remy Davison 23:57:26 03/21/04 (0)
      • Re: Yes, there was a 1980 M635 - Lee Cornett 21:24:44 03/21/04 (0)
    • Re: E12 Euro 535i, converted from 1980 M635i - Blair 19:20:22 03/21/04 (0)
• E12 classified posted under "BMW" - Canadian Neil 17:21:21 03/21/04 (0)
• 3 e12's at Oakland pick n pull - erik 15:24:14 03/21/04 (2)
  • Re: 3 e12's at Oakland pick n pull - Francois Gaignaux 10:55:56 03/22/04 (1)
    • Sorry I do not have the time. nt - erik 20:51:44 03/23/04 (0)
• ATTN! M535i discovered for sale in Bay Area - Adam Wilson in Chicago 10:44:52 03/21/04 (0)
• Front Struts - Dan Lafley 10:19:38 03/21/04 (3)
  • Do yourself a favor... - Don Daynes 19:04:24 03/21/04 (0)