Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XXXVIII

(2004/07/09 - 2004/08/15)

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• long update...donated 528i......... - jim not at da shop 10:02:55 08/15/04 (2)
  • Sunroof depends on the year - Mike W. 10:30:06 08/15/04 (1)
    • thx mike.its an 81... - jim not at da shop 10:38:25 08/15/04 (0)
• long update...donated 528i......... - jim not at da shop 10:02:04 08/15/04 (0)
• Radiator - Erick 01:44:14 08/15/04 (2)
  • You probably already know this, but - Mike W. 10:33:24 08/15/04 (0)
  • Re: Radiator - Troy Rudolph 09:00:06 08/15/04 (0)
• auxiliary air valve - gilbert 21:24:18 08/14/04 (1)
  • Re: auxiliary air valve - Bill Gulf Coast (Fairhope 08:04:28 08/15/04 (0)
• exhaust system is out of the car, questions - Adam Wilson in Chicago 20:37:02 08/14/04 (2)
  • Re: exhaust system is out of the car, questions - Will Ollison 21:41:31 08/14/04 (0)
  • Re: exhaust system is out of the car, questions - Will Ollison 21:39:40 08/14/04 (0)
• Needed one 15x7et11BBS/Mahle Wheel - Wolfgang von Whitakers 18:41:16 08/14/04 (0)
• Chicago junkyard scoping on a beautiful Saturday - Adam Wilson in Chicago 18:15:53 08/14/04 (3)
  • Re: Chicago junkyard scoping on a beautiful Saturday - Allan A 21:12:46 08/14/04 (0)
  • Hey Adam - Gavin Gray 20:33:31 08/14/04 (1)
    • we can go back tomorrow - Adam Wilson in Chicago 20:37:41 08/14/04 (0)
• R12 - Dan Lafley 15:54:29 08/14/04 (1)
  • Unless you have repaired the system - Mike W. 10:26:17 08/15/04 (0)
• More Ugly Ugly Pictures ... - Bill Gulf Coast 12:16:54 08/14/04 (10)
  • I'm thinking of two numbers. - ChuckNC 19:24:50 08/14/04 (1)
    • Re: I'm thinking of two numbers. - Bill Gulf Coast (Fairhope) 07:23:58 08/15/04 (0)
  • 3.5, 3.5, 3.5, 3.5, 3.5, 3.5, ... - Troy Rudolph 17:37:40 08/14/04 (1)
    • Party Pooper - Bill Gulf Coast 18:24:53 08/14/04 (0)
  • OK, everybody chant, THREE-FIVE, THREE-FIVE - Mike W. 14:03:52 08/14/04 (3)
    • Re: OK, everybody chant, THREE-FIVE, THREE-FIVE - Bill Gulf Coast 16:16:04 08/14/04 (2)
      • Abilene is kinda close to the gulf coast... - Brian in Abilene 16:58:47 08/14/04 (1)
        • Re: Abilene is kinda close to the gulf coast... - Bill Gulf Coast 17:04:50 08/14/04 (0)
  • how? - greghill-phx 13:42:38 08/14/04 (1)
    • Re: how? - Bill Gulf Coast 16:59:47 08/14/04 (0)
• top load filter Canister FS - Alonzo G. Taylor III 09:40:21 08/14/04 (0)
• 1980 528i for sale in Abilene, TX - Brian in Abilene 19:45:35 08/13/04 (2)
  • Pepperdine? (eom) - Troy Rudolph 21:09:40 08/13/04 (1)
    • Yep. Made me an offer I couldn't refuse. (eom) - Brian in Abilene 02:19:43 08/14/04 (0)
• Ryan Bryan...Again - Rick 19:36:16 08/13/04 (2)
  • Re: Ryan Bryan...Again - Ryan Bryan 06:40:30 08/14/04 (1)
    • Re: Ryan Bryan...Again - Rick 12:43:23 08/14/04 (0)
• 78 530i Value?????? - Lucas Howard 18:39:23 08/13/04 (0)
• It's my fault (sort of) - Troy Rudolph 18:38:15 08/13/04 (2)
  • Re: It's my fault (sort of) - Rick 19:31:43 08/13/04 (1)
    • No problem. Thanks for the update. (eom) - Brian in Abilene 19:39:59 08/13/04 (0)
• FS COM Dec 2000 /Sept 1999 - Wietse 18:24:00 08/13/04 (2)
  • Damn! Why do all the good ones come up .... - Adam Wilson in Chicago 20:03:58 08/13/04 (0)
  • Re: FS COM Dec 2000 /Sept 1999 - Troy Rudolph 18:35:21 08/13/04 (0)
• free metal stuff - ...tom 18:11:20 08/13/04 (1)
  • free metal stuff . .complete Set? - Neck Smith 20:17:28 08/13/04 (0)
• Paging Mike in Kent Washington... - Tulsa Dave 15:19:27 08/13/04 (0)
• 5er Fest 2004 San Diego - Website updated today - Clay 14:19:18 08/13/04 (5)
  • Which First Fivers can I expect to see there? - Robert Bondi 15:31:15 08/13/04 (4)
    • I will be there but... - Eric Q 17:03:38 08/13/04 (1)
      • I too will be there, but... - Mike W. 13:59:17 08/14/04 (0)
    • I will be there but... - Eric Q 17:03:08 08/13/04 (0)
    • I will be there - Jeff F 16:11:01 08/13/04 (0)
• Digital clock - Allan A. 13:43:05 08/13/04 (0)
• Question about earlier post - Brian in Abilene 11:27:04 08/13/04 (5)
  • Re: Question about earlier post - Ryan Bryan 18:03:01 08/13/04 (0)
  • I noticed it - Robert Bondi 13:39:59 08/13/04 (1)
    • Thanks, Robert - Brian in Abilene 14:16:11 08/13/04 (0)
  • paging Troy.... - ...tom 11:49:04 08/13/04 (1)
    • Re: paging Troy.... - T.Han 13:23:40 08/13/04 (0)
• Oil Changes (Slightly OT, and not meant to offend) - Bill In Michigan 10:46:44 08/13/04 (1)
  • LOL Sounds about right - Jack 20:08:45 08/13/04 (0)
• MAF conversion - peter mooney 08:43:22 08/13/04 (2)
  • Re: MAF conversion - Rick 19:34:44 08/13/04 (0)
  • Re: MAF conversion - Karl if KS 15:39:08 08/13/04 (0)
• Bilstein, BoGe, Eichbach ? - Neck Smith 12:48:31 08/12/04 (0)
• Cats - T.Han 07:55:23 08/12/04 (2)
  • Re: Cats (Sorry, bad joke) - Bill In Michigan 10:31:14 08/13/04 (0)
  • Re: Cats - Troy Rudolph 15:31:31 08/12/04 (0)
• Solex 4A1 downdraft carburettor - Tim Reczek (QWK-520) 01:32:22 08/12/04 (3)
  • i have both the original solex and a new weber fs - ...tom 12:04:46 08/12/04 (0)
  • How about a Weber setup? - Brian in Abilene 06:07:33 08/12/04 (0)
  • Re: Solex 4A1 downdraft carburettor - Temich from Russia 02:55:05 08/12/04 (0)
• E12 FS in Melbourne, Australia - Remy Davison 01:23:10 08/12/04 (0)
• Hood cable/handle - Remy Davison 23:36:10 08/11/04 (0)
• M5 3.8 into M535i E12 Block? - Peter Young 23:02:35 08/11/04 (2)
  • Speak to Jim @ Metric Mechanic - Misha 10:23:17 08/12/04 (0)
  • Check out Paul Cain's e9 - Velocewest 23:09:25 08/11/04 (0)
• Exhaust advice - T.Han 21:04:53 08/11/04 (1)
  • A couple of references - Troy Rudolph 21:54:39 08/11/04 (0)
• Any one looking for an E12 near Atlanta Ga? - rs4pro3 20:50:14 08/11/04 (0)
• Video Chat Community - Dorothy 20:21:27 08/11/04 (1)
  • complaint sent to ev1.net (do not read above post) - spam slammer 04:11:21 08/12/04 (0)
• throttle blip hesitation - Chris from Nor-Cal 13:18:15 08/11/04 (3)
  • Re: throttle blip hesitation - greghill-phx,az 21:04:39 08/11/04 (1)
    • Thanks Greghill!!!! Re: throttle blip hesitation - Chris 21:27:58 08/11/04 (0)
  • I've got the same problem D car's missing out.. - Andres Moreno 13:30:27 08/11/04 (0)
• source for molded dash cover or mat..? - jim not at da shop 11:40:07 08/11/04 (2)
  • I got a soft one from Mesa Performance... - Tulsa Dave 12:02:40 08/11/04 (1)
    • Re: I got a soft one from Mesa Performance... - T. Han 13:26:33 08/13/04 (0)
• Intake Runner Torque Spec 1981 528i - Harry Q 10:15:38 08/11/04 (0)
• Question About Bulletin Board - Bill Gulf Coast 07:15:21 08/11/04 (7)
  • Re: Question About Bulletin Board - Troy Rudolph (Webmaster) 15:49:10 08/11/04 (6)
    • Re: Question About Bulletin Board - Bill Gulf Coast 20:19:02 08/11/04 (3)
      • Good idea, but... - Tulsa Dave 20:28:08 08/11/04 (2)
        • Re: Good idea, but... - Bill Gulf Coast 20:36:50 08/11/04 (0)
        • Obstinence... not abstinence... - Tulsa Dave 20:29:20 08/11/04 (0)
    • I grown to like the format as is... - Tulsa Dave 18:45:18 08/11/04 (1)
      • Re: I grown to like the format as is... - me 2 - Michael R from Melbourne 19:45:31 08/11/04 (0)
• 320 intake runners - Will Ollisom 06:53:01 08/11/04 (0)
• metal thickness - ...tom 06:36:03 08/11/04 (2)
  • Re: metal thickness - Noel in LA 08:07:54 08/11/04 (1)
    • Re: metal thickness (also sound deadening) - Peter Florance 04:21:31 08/12/04 (0)
• o2 sensor - papajimmm nh 04:32:49 08/11/04 (4)
  • Re: o2 sensor - Bob in San Jose 13:18:33 08/11/04 (0)
  • o2 sensor: gOOD Or bAd? - Neck Smith 06:51:06 08/11/04 (2)
    • no,no,relatively new, no - papajimmm nh 08:20:29 08/11/04 (1)
      • bench test it. - mike lytle 09:05:34 08/11/04 (0)
• Dash lights - Damien in Sydney 01:14:39 08/11/04 (4)
  • Re: Dash lights - Michael R from Melbourne 19:47:43 08/11/04 (1)
    • Done that much already! nt. - Damien in Sydney 23:16:40 08/11/04 (0)
  • Grounds (or earths, your choice!) (nt) - Velocewest 01:18:55 08/11/04 (1)
    • I'll try earths! Thanks. nt - Damien in Sydney 23:17:03 08/11/04 (0)
• so .... who was the guy I sent the .... - Adam Wilson in Chicago 19:16:26 08/10/04 (1)
  • Re: so .... who was the guy I sent the .... - Bob in San Jose 23:14:15 08/10/04 (0)
• Re-torquing the head at 150 K miles? - Jaime Obando 10:58:28 08/10/04 (4)
  • I have a new head and it still does it - Matt C 18:10:12 08/10/04 (0)
  • Have had that same location leak on 2 - Lars OBG 16:22:44 08/10/04 (0)
  • Re: Re-torquing the head at 150 K miles? - Peter Florance 12:33:55 08/10/04 (1)
    • head retorque is not part of regular maintance. - Sam Schultz 14:24:48 08/10/04 (0)
• Ignition systrem - oz Jeff 07:56:52 08/10/04 (10)
  • Re: Ignition system - Troy Rudolph 20:22:56 08/10/04 (2)
    • And you, sir, are correct!... - Lenny D. 20:46:50 08/10/04 (1)
      • No, but I'd like to find one. (eom) - Troy Rudolph 15:34:58 08/11/04 (0)
  • Ask Kaveman - Peter C 15:46:48 08/10/04 (0)
  • Re: Ignition systrem - Peter Florance 12:35:26 08/10/04 (5)
    • Re: Ignition systrem - oz Jeff 16:03:21 08/10/04 (4)
      • Re: Ignition systrem - Bill Gulf Coast 19:28:58 08/10/04 (2)
        • glovebox - Peter Florance 04:01:13 08/11/04 (1)
          • Re: glovebox - Bill 05:16:46 08/11/04 (0)
      • Re: Ignition systrem - Lenny D. 19:11:11 08/10/04 (0)
• Mandatory Reading for FirstFives Participants - Troy Rudolph (Webmaster) 21:41:35 08/09/04 (17)
  • A technical explanation and plea for patience - Mike E 17:08:15 08/10/04 (1)
    • Re: A technical explanation and plea for patience - Al from Oz 20:25:33 08/10/04 (0)
  • Suggestion - Lou in Denver 11:46:24 08/10/04 (0)
  • Re: Mandatory Reading for FirstFives Participants - Ryan Bryan 09:19:57 08/10/04 (0)
  • Re: Mandatory Reading for FirstFives Participants - Brad In Texas 08:18:43 08/10/04 (0)
  • Thanks for the vote of confidence - Troy Rudolph (Webmaster) 06:29:57 08/10/04 (4)
    • No apologies, you do a great job. - Mike W. 22:07:28 08/10/04 (0)
    • Thanks to this site my 528i takes me to work. . .. - Jaime Obando 20:45:01 08/10/04 (1)
      • Good post - dead right, Jaime - Remy Davison 23:33:17 08/11/04 (0)
    • A sincere thank you. (long) - Brian in Abilene 07:58:55 08/10/04 (0)
  • why was the thread removed about ebay? - Adam Wilson in Chicago 05:07:09 08/10/04 (6)
    • Agree to some degree: Caveat Venditor - Misha 13:01:47 08/11/04 (0)
    • This isn't a democracy, it's a message board - Velocewest 14:36:21 08/10/04 (0)
    • I agree completely! - Luke 12:48:55 08/10/04 (0)
    • I love, and agree with the "heavy handed" policy - eric in denver 08:54:13 08/10/04 (0)
    • Whilst other very offensive posts remain. - Al from Oz 05:35:22 08/10/04 (1)
      • explanation - Peter Florance 06:06:56 08/10/04 (0)
• re-torquing heads? - Peter Florance 20:17:37 08/09/04 (5)
  • Yes you can do it - Sam Schultz 14:23:06 08/10/04 (0)
  • Re: re-torquing heads? - Brad In Texas 08:21:25 08/10/04 (0)
  • yes you can. - Frank H 22:21:00 08/09/04 (0)
  • Re: re-torquing heads? - Troy Rudolph 21:09:50 08/09/04 (1)
    • Retorquing heads and seeping oil from a headGasket - Jaime Obando 23:47:08 08/09/04 (0)
• Paging Lars - Jamie Seattle 20:09:14 08/09/04 (1)
  • too bad - ChuckNC 14:33:09 08/10/04 (0)
• Paging Lars, or ? My car got keyed - Mike W. 17:45:38 08/09/04 (6)
  • Eastwood - Peter Florance 19:58:13 08/09/04 (2)
    • She's giving up... - Karl in KS 10:47:04 08/10/04 (1)
      • gave up - Peter Florance 12:36:10 08/10/04 (0)
  • Jamie is on the right track.... - Lars OBG 19:22:44 08/09/04 (0)
  • Re: Paging Lars, or ? My car got keyed - Jamie Seattle 19:00:30 08/09/04 (0)
  • Re: Paging Lars, or ? My car got keyed - Scott in Melb 18:43:57 08/09/04 (0)
• First Fives shirts - need opinions... - Eric Q 17:08:29 08/09/04 (33)
  • Knowing a thing or 3 about screenprinting... - Velocewest 13:01:08 08/11/04 (2)
    • Re: Knowing a thing or 3 about screenprinting... - Eric Q 17:50:27 08/11/04 (1)
      • Re: Knowing a thing or 3 about screenprinting... - Velocewest 23:07:25 08/11/04 (0)
  • Dark Blue or Gray - Brad In Texas 05:01:51 08/11/04 (0)
  • Black,white, or dark blue - James C 21:08:56 08/10/04 (0)
  • another vote for grey - Robert Bondi 19:22:58 08/10/04 (0)
  • NOT black, because it fades, quickly, >> - Mike W. 18:43:02 08/10/04 (1)
    • 100% cotton fades, poly blend would be more stable - Velocewest 23:12:44 08/11/04 (0)
  • not to make life difficult, AND - ...tom 12:37:58 08/10/04 (2)
    • That makes life difficult... :) - Eric Q 17:23:25 08/10/04 (0)
    • How about Cafepress.com? - Luke 12:58:09 08/10/04 (0)
  • Thanks Eric!!!! - John From Antioch 12:03:01 08/10/04 (0)
  • Dark Grey - Eddie in TO 11:12:24 08/10/04 (0)
  • we used light grey... - Karl in KS 10:54:09 08/10/04 (0)
  • Black - Misha 10:23:23 08/10/04 (0)
  • Darkblue or Black ... - Niklas Edlund - Motronic E12 05:02:57 08/10/04 (1)
    • Yes, see below (nt) - Eric Q 12:15:40 08/10/04 (0)
  • could you send it into Russia ? (-) - Temich 04:01:59 08/10/04 (1)
    • Re: could you send it into Russia ? (-) - Eric Q 12:14:30 08/10/04 (0)
  • Grey or Dark Blue is fine with me. XL - NC Doug 03:56:17 08/10/04 (0)
  • Re: First Fives shirts - need opinions... - Peter Florance 03:55:19 08/10/04 (1)
    • You order them, I'll get them...(nt) - Eric Q 12:12:57 08/10/04 (0)
  • Arktisblau (metallic) ;-) - Mike 01:14:35 08/10/04 (0)
  • black, please. (eom) - Troy Rudolph 22:11:53 08/09/04 (0)
  • Re: First Fives shirts - need opinions... - Russell 20:05:02 08/09/04 (0)
  • grey if you can't find kastanienrot! - Greg J 19:30:50 08/09/04 (1)
    • Clarification on the "gray" - Eric Q 19:58:52 08/09/04 (0)
  • I like grey, dark blue might as well be black - Adam Wilson in Chicago 17:31:41 08/09/04 (5)
    • Grey for oktoberfest Austin Here we come! - Neck Smith 18:50:45 08/09/04 (0)
    • But grey lets everyone know just HOW hot... - Tulsa Dave 17:41:29 08/09/04 (3)
      • anything but white & I resemble that remark - papajimmm nh 19:21:22 08/09/04 (2)
        • Grey sounds good. - Michael R from Melbourne 22:46:31 08/09/04 (1)
          • T-shirts - Eric Q 23:19:46 08/09/04 (0)
• 77 530i parting out - Jamie Seattle 16:52:39 08/09/04 (0)
• Battery at 17.95 VDC with engine off? - Jim Race 13:11:23 08/09/04 (2)
  • Outcome??? - Bill on the Gulf Coast 16:00:29 08/10/04 (0)
  • Re: Battery at 17.95 VDC with engine off? - Bill on the Gulf Coast 13:47:12 08/09/04 (0)
• Front Strut inserts - Jay in VA 11:27:24 08/09/04 (1)
  • Boge, Bilstein, eichbach I need them too! - Jaime Obando 11:48:57 08/09/04 (0)
• 528i needs new windshield - Andrew 09:48:49 08/09/04 (4)
  • Re: 528i needs new windshield - Peter Florance 10:45:12 08/09/04 (0)
  • Re: 528i needs new windshield - Brad In Texas 10:23:26 08/09/04 (2)
    • Re: 528i needs new windshield - Andrew 10:44:41 08/09/04 (1)
      • Re: 528i needs new windshield - Brad In Texas 14:58:28 08/09/04 (0)
• Can't find the infamous combo relay! - Jaime Obando 08:54:41 08/09/04 (4)
  • Re: Can't find the infamous combo relay! - Ryan Bryan 09:00:06 08/09/04 (3)
    • what function does it play? - Jaime Obando 09:28:27 08/09/04 (2)
      • Re: what function does it play? - 2002sue 09:46:00 08/09/04 (1)
        • Bosch #! - Peter Florance 11:25:27 08/09/04 (0)
• FS: M30 engine and getrag 260/5 tranny - Tj in Charlotte 08:10:23 08/09/04 (0)
• Hesitation Problems, Tail-Light fix (long) - Brad In Texas 05:48:07 08/09/04 (9)
  • Another place to look - guibo - Peter C 15:52:45 08/10/04 (0)
  • My off-idle hiccup turned out to be... - Lenny D. 10:25:38 08/09/04 (3)
    • Lenny: What do you mean by HT ignition wires? - Neck Smith 23:51:59 08/09/04 (2)
      • Sorry, yes, HT = high tension leads... - Lenny D. 22:36:49 08/11/04 (0)
      • Yes, I think he means spark plug wires (nt) - Velocewest 13:02:32 08/11/04 (0)
  • Hesitation Problems - Neck Smith 08:48:48 08/09/04 (0)
  • Re: Hesitation Problems, Tail-Light fix (long) - Brian in Abilene 06:06:30 08/09/04 (2)
    • Re: Hesitation Problems, Tail-Light fix (long) - Brad In Texas 07:33:24 08/09/04 (1)
      • Re: Hesitation Problems, Tail-Light fix (long) - Chris Hollis 07:39:34 08/09/04 (0)
• Progress on Repo Car - high RPM cut-out fixed! - Peter Florance 04:03:28 08/09/04 (1)
  • Hey Peter... - Lenny D. 10:31:57 08/09/04 (0)
• Paging Sam Schultz - Mike E 03:25:46 08/09/04 (2)
  • Apologies - Mike E 01:12:04 08/10/04 (0)
  • Responce emailed, and what are you looking for? - Sam Schultz 08:44:21 08/09/04 (0)
• Why put synthetic on a 79' Good old BMW? - Andres Moreno 21:32:42 08/08/04 (10)
  • Mobil 1 15w50 in '80 528i - Troy Rudolph 22:18:38 08/09/04 (0)
  • NEVER run syn. in an early engine. - Sam Schultz 08:54:44 08/09/04 (2)
    • So what would you run in an E12 that ran synth.... - Frank H 13:21:09 08/09/04 (0)
    • Re: NEVER run syn. in an early engine. - Jim Davis 12:40:36 08/09/04 (0)
  • Go with Fully syntetic ! - Niklas Edlund - Motronic E12 02:17:15 08/09/04 (0)
  • Dino Oil good enough. I've had something on - Lars Olbimmerguy 22:18:39 08/08/04 (4)
    • Dinosaur Oil good enough?Try the Valvoline Blend! - Neck Smith 00:40:04 08/09/04 (3)
      • I've been using DELLO by chevron - 15w/40 - Andres Moreno 00:46:34 08/09/04 (2)
        • you should be using a 20w50 in TX - Robert Bondi 03:18:04 08/09/04 (1)
          • Re: you should be using a 20w50 in TX - Tim Reczek (QWK-520) 03:40:09 08/09/04 (0)
• coolant-reservoir $80. dealership priceTOO MUCH !! - Jaime Obando in Hot Steamy Houston-need reservoir 19:34:41 08/08/04 (3)
  • $25.00 stop the hate special - 2002sue 22:48:38 08/08/04 (0)
  • check here... - Robert Bondi 20:08:54 08/08/04 (0)
  • Re: coolant-reservoir $80. dealership priceTOO MUCH !! - Tulsa Dave 19:48:49 08/08/04 (0)
• Hose part# 11-15-1-261-161 Praise the Lord !! - Neck Smith 18:15:51 08/08/04 (0)
• The weekend's progress - Mike E 17:32:28 08/08/04 (1)
  • very interesting. . - Andres Moreno 18:00:29 08/08/04 (0)
• Fan clutch removal - Xotie 13:54:23 08/08/04 (2)
  • Right hand, and more - Mike W. 14:09:15 08/08/04 (1)
    • Re: Right hand, and more - Xotie 19:29:23 08/08/04 (0)
• need advice on this bmw wheel if it fits or NOT! - Jaime Obando 13:16:33 08/08/04 (1)
  • Yes, BUT DON'T go near it - Mike W. 14:18:09 08/08/04 (0)
• diff repair needed badly...feedback on best way - eric in denver 13:05:06 08/08/04 (2)
  • BMW repair kit - Karl in KS 15:21:03 08/09/04 (0)
  • the previous owner had mine welded - Adam Wilson in Chicago 18:33:32 08/08/04 (0)
• weak window motor question - eric in denver 12:53:51 08/08/04 (2)
  • Re: weak window motor question - Mike W. 14:13:25 08/08/04 (0)
  • Small electric motor rewind shops.... - Lars Olbimmerguy 13:17:41 08/08/04 (0)
• window only opens 1/2 inch - papajimmm nh 11:27:05 08/08/04 (0)
• Revisited: The Ugly ... - Bill 10:55:57 08/08/04 (20)
  • 3.5 conversion time - Karl in KS 15:23:51 08/09/04 (0)
  • That's where they always crack - Mike W. 10:23:14 08/09/04 (4)
    • Re: That's where they always crack - Bill 13:10:11 08/09/04 (3)
      • no don't do it - Peter Florance 20:20:59 08/09/04 (2)
        • Re: no don't do it - Bill on the Gulf Coast 20:41:23 08/09/04 (1)
          • Much better idea - Mike W. 22:13:05 08/09/04 (0)
  • wow, that is AWFUL - Adam Wilson in Chicago 18:42:44 08/08/04 (2)
    • Re: wow, that is AWFUL - Bill on the Gulf Coast 21:20:56 08/08/04 (1)
      • Re: wow, that is AWFUL - Adam Wilson in Chicago 14:14:42 08/09/04 (0)
  • What's inside the fuel tank look like? - Jeff Olson 14:55:23 08/08/04 (1)
    • Re: What's inside the fuel tank look like? - Bill on the Gulf Coast 21:13:17 08/08/04 (0)
  • How does that happen... - eric in denver 12:50:27 08/08/04 (7)
    • Re: How does that happen... - Bill on the Gulf Coast 13:43:09 08/08/04 (6)
      • cool, fascinating, but sad - Adam Wilson in Chicago 18:47:10 08/08/04 (1)
        • Re: cool, fascinating, but sad - Bill on the Gulf Coast 21:05:48 08/08/04 (0)
      • Some suggestions - Mike W. 14:32:01 08/08/04 (3)
        • also - Peter Florance 18:43:59 08/08/04 (2)
          • ummm ... the trunk has a power lock actuator?? - Adam Wilson in Chicago 18:45:50 08/08/04 (1)
            • yes - Peter Florance 19:33:32 08/08/04 (0)
  • YUCK!!! - Tulsa Dave 11:28:16 08/08/04 (0)
• test message - Peter Florance 06:25:58 08/08/04 (0)
• OT: Speed Channel - Cdn_Bimmer 05:01:02 08/08/04 (1)
  • "It's where the money is..." - Velocewest 11:09:47 08/08/04 (0)
• running rich - BRIAN IN GERMAN Y 23:30:36 08/07/04 (0)
• Trubey; about your interior... - Rick 19:30:18 08/07/04 (0)
• And Popa Mechanic Said ... - Bill 18:50:41 08/07/04 (0)
• 1980 528i FOR SALE in North Carolina... - Jeff Olson 16:53:52 08/07/04 (0)
• Procedure for checking fuel pressure reg? - Jay 15:25:52 08/07/04 (1)
  • just change it-if it's been a while get a new one! - Jaime Obando 21:00:45 08/07/04 (0)
• Clutch bleeding, binding,etc. - T.Han 10:40:29 08/07/04 (3)
  • Re: Clutch bleeding, binding,etc. - Gerry in ACT/Oz 15:49:58 08/07/04 (1)
    • Re: Clutch bleeding, binding,etc. - T.Han 19:09:18 08/07/04 (0)
  • Re: Clutch bleeding, binding,etc. - Bill 11:04:28 08/07/04 (0)
• Converting 80 528i Auto to 535i 5speed..... - Lorens Kulla 09:49:09 08/07/04 (2)
  • Look at these links to the FAQ - Mike E 15:48:45 08/07/04 (1)
    • Re: Look at these links to the FAQ - Lorens Kulla 17:47:44 08/08/04 (0)
• Emission Test Results - Gavin Gray 07:55:35 08/07/04 (4)
  • Re: Emission Test Results - greghill 11:31:18 08/07/04 (0)
  • C'mon give us the secret how did you do it? - Jaime Obando 09:24:18 08/07/04 (2)
    • The Secret... - Gavin Gray 11:46:32 08/07/04 (1)
      • I would love to see a picture of your engine! - Andres Moreno 20:50:58 08/07/04 (0)
• Front Suspension rebuild - part one - Mike E 07:25:52 08/07/04 (0)
• What are these electical connectors/devices - Bill 07:21:48 08/07/04 (1)
  • I figured it out - Bill 10:59:08 08/07/04 (0)
• Paging Troy Rudolph...Wheels & Tires - Rick 21:21:24 08/06/04 (4)
  • Re: Paging Troy Rudolph...Wheels & Tires - Ryan Bryan 08:42:39 08/07/04 (1)
    • Re: Paging Troy Rudolph...Wheels & Tires - Rick 19:16:45 08/11/04 (0)
  • Re: Wheels & Tires - Troy Rudolph 21:57:31 08/06/04 (1)
    • Re: Wheels & Tires - Rick 04:24:11 08/07/04 (0)
• who had the brown 528 in Houston Fore Sale ??? - Stan 20:07:13 08/06/04 (2)
  • Re: who had the brown 528 in Houston Fore Sale ??? - Rick 04:27:44 08/07/04 (1)
    • thanks,brown 528 in Houston Fore Sale ??? - Stan 07:52:52 08/07/04 (0)
• Clutch pedal squeek - T.Han 19:19:28 08/06/04 (0)
• Headlights out??? - Canada Karl 18:32:29 08/06/04 (0)
• Why I love my old 528i and why I hate it.. . - Jaime Obando 17:35:59 08/06/04 (13)
  • one more thing about valve seals - Peter Florance 06:48:36 08/07/04 (0)
  • what weight oil? - Peter Florance 04:05:57 08/07/04 (0)
  • Fix it like I did - Karl in KS 20:46:35 08/06/04 (0)
  • wife and mother vs. e12 advise (funny I hope) - Chris Hollis 19:26:43 08/06/04 (0)
  • Re: Why I love my old 528i and why I hate it.. . - Matt C 19:23:01 08/06/04 (8)
    • hard Hoses. . I thought the harder the better. . - Jaime Obando 19:30:38 08/06/04 (7)
      • only on your honeymoon... - Karl in KS 20:41:53 08/06/04 (6)
        • seriously though... - Karl in KS 20:51:45 08/06/04 (5)
          • Re: seriously though Greghill has a point ! - Neck Smith 02:31:28 08/07/04 (1)
            • Wouldn't block or restrict crankcase lines - Matt C 07:19:40 08/07/04 (0)
          • thank you! what about GAS consumption? - Jaime Obando 02:23:56 08/07/04 (2)
            • Re: thank you! what about GAS consumption? - Jeff (Atlanta) 14:56:07 08/07/04 (1)
              • Re: thank you! what about GAS consumption? - ChuckNC 18:30:29 08/07/04 (0)
• Hose part# 11-15-1-261-161 - Jaime Obando 17:15:52 08/06/04 (2)
  • once a year? - Peter Florance 04:39:37 08/07/04 (0)
  • Re: Hose part# 11-15-1-261-161 - Karl in KS 20:55:42 08/06/04 (0)
• Another addition to the driveshaft auto to 5 speed - Jeff C 09:49:16 08/06/04 (1)
  • Re: Another addition to the driveshaft auto to 5 s - Don Daynes 20:03:58 08/06/04 (0)
• 6 Series Steering Wheel in E12 - Gerry in ACT/Oz 04:52:10 08/06/04 (7)
  • Re: 6 Series Steering Wheel in E12 - Scott in Melb 05:20:33 08/06/04 (6)
    • Re: 6 Series Steering Wheel in E12 - Gerry in ACT/Oz 15:10:08 08/06/04 (0)
    • Topasbraun or Kastanienrot? - Greg J 06:01:49 08/06/04 (4)
      • Re: Topasbraun or Kastanienrot? - Scott in Melb 06:42:56 08/06/04 (3)
        • Thanks, I will have to see one - Greg J 10:49:46 08/06/04 (2)
          • Re: Thanks, I will have to see one - Scott in Melb 12:35:23 08/06/04 (1)
            • Colour chart for E12s is at Ulli's site - Remy Davison 21:32:58 08/08/04 (0)
• E21 recaro seats - Tito 01:32:16 08/06/04 (2)
  • Just make crossbars, install e21 tracks - Velocewest 11:51:18 08/06/04 (1)
    • Thank you, Tony - Tito 02:28:02 08/08/04 (0)
• eccentric valve adjustment-tools-hints-hot or cold - Neck Smith 21:40:06 08/05/04 (3)
  • Re: eccentric valve adjustment-tools-hints-hot or cold - peter mooney 22:29:43 08/05/04 (2)
    • Gaps... - Lenny D. 23:18:58 08/05/04 (0)
    • Re: eccentric valve adjustment-tools-hints-hot or - greghill-phx,az 23:16:37 08/05/04 (0)
• 1980 528i; Should I buy it? - doninportland 19:49:16 08/05/04 (8)
  • Re: 1980 528i; Should I buy it? - doninportland 11:52:01 08/06/04 (0)
  • buy it.. you can't go wrong for 950 ! - Jaime Obando 21:19:46 08/05/04 (6)
    • Re: buy it.. you can't go wrong for 950 ! - doninportland 21:35:29 08/05/04 (5)
      • valve seals - greghill 11:15:02 08/06/04 (2)
        • valve seals & My car does not leak.. Not a drop! - Jaime Obando 17:27:29 08/06/04 (1)
          • theory on ordering parts - greghill-phx,az 19:59:05 08/06/04 (0)
      • will you love your car more than your wife? - Jaime Obando 21:49:41 08/05/04 (1)
        • Re: will you love your car more than your wife? - Mark 02:55:02 08/06/04 (0)
• 3.0/3.3 block, which is it? - Bill 18:01:46 08/05/04 (8)
  • Re: 3.0/3.3 block, which is it? - Troy Rudolph 18:27:29 08/05/04 (7)
    • Re: 3.0/3.3 block, which is it? - Bill 18:46:12 08/05/04 (6)
      • Parts to interchange - Mike W. 19:06:44 08/05/04 (5)
        • Re: Parts to interchange - Bill 19:31:01 08/05/04 (4)
          • '89-'93 535/635/735 has 9.0:1 and 209 bhp - Troy Rudolph 21:07:54 08/05/04 (3)
            • Re: '89-'93 535/635/735 has 9.0:1 and 209 bhp - Bill 05:48:55 08/06/04 (2)
              • Re: '89-'93 535/635/735 has 9.0:1 and 209 bhp - Troy Rudolph 14:59:17 08/06/04 (0)
              • Re: '89-'93 535/635/735 has 9.0:1 and 209 bhp - Frank H 10:01:26 08/06/04 (0)
• The Good, The Bad, The Ugly .... - Bill 17:31:30 08/05/04 (7)
  • From the looks of it.... - Frank H 18:38:49 08/07/04 (1)
    • Re: From the looks of it.... - Bill 05:56:33 08/08/04 (0)
  • "white ash" - Karl in KS 21:06:32 08/06/04 (3)
    • wow, that is kinda ugly - Adam Wilson in Chicago 15:35:41 08/07/04 (1)
      • Re: wow, that is kinda ugly - Bill 06:04:47 08/08/04 (0)
    • Re: "white ash" - Bill 07:13:15 08/07/04 (0)
  • Re: The Good, The Bad, The Ugly .... - Peter Florance 18:01:01 08/05/04 (0)
• New springs - chuckle - Mike E 17:02:35 08/05/04 (3)
  • Re: New springs - chuckle - oz Jeff 00:39:07 08/07/04 (1)
    • That's them... - Mike E 06:08:27 08/07/04 (0)
  • Re: New springs - chuckle I will. - Michael R from Melbourne 18:18:11 08/05/04 (0)
• water everywhere!!!!! Help!!!!!!!!! - sdjeremyv 16:54:31 08/05/04 (1)
  • make sure all clamps are tight ! - Andres Moreno 21:31:28 08/05/04 (0)
• A/C blower fan still on when car is turned off? - Jaime Obando 14:45:09 08/05/04 (6)
  • It must be contagious ... - Troy Rudolph 15:49:04 08/05/04 (5)
    • Re: It must be contagious ... - Karl in KS 21:09:48 08/06/04 (0)
    • I think... - Mike W. 18:59:23 08/05/04 (3)
      • my bad - Troy Rudolph 19:10:49 08/05/04 (2)
        • Are you sure it isn't both? - Mike W. 21:20:04 08/05/04 (1)
          • I was always told... - Lenny D. 23:27:16 08/05/04 (0)
• Need help from the susp/brake guru's - Matt C 14:41:55 08/05/04 (6)
  • Re: Need help from the susp/brake guru's - Kaveman 16:03:59 08/05/04 (5)
    • Re: Need help from the susp/brake guru's - Matt C 16:46:50 08/05/04 (4)
      • Re: Need help from the susp/brake guru's - Dan - London 15:43:54 08/06/04 (3)
        • Re: Need help from the susp/brake guru's - Dan - l 15:52:24 08/06/04 (2)
          • Yeah everything is new - Matt C 19:26:29 08/06/04 (1)
            • Re: Yeah everything is new - Karl in KS 21:15:47 08/06/04 (0)
• Car Info - QWk-520 06:39:07 08/05/04 (1)
  • nice! - Troy Rudolph 16:26:35 08/05/04 (0)
• E-12 sighting, Elliot, Maine - Matt C 03:50:17 08/05/04 (0)
• water reservoir needed.. . - Jaime Obando 01:30:12 08/05/04 (6)
  • There are very few things I won't buy used... - Mike W. 18:52:01 08/05/04 (0)
  • Has anyone repaired on of these? - Mike in Chicago 07:02:08 08/05/04 (4)
    • what Mike said... - Karl in KS 21:20:36 08/06/04 (0)
    • Hot Glue? - Troy Rudolph 16:34:14 08/05/04 (2)
      • Re: Hot Glue? - Grant 21:47:21 08/05/04 (1)
        • Re: Hot Glue? - Peter Florance 05:46:02 08/06/04 (0)
• "encapsulated diode" What now. any suggestions? - Andres Moreno 01:23:17 08/05/04 (2)
  • Did you read my reply from a couple of days ago? - Mike W. 18:46:45 08/05/04 (0)
  • Re: "encapsulated diode" What now. any suggestions? - Peter Florance 03:10:12 08/05/04 (0)
• This weekend... - Mike E 22:04:59 08/04/04 (5)
  • Re: This weekend... - Troy Rudolph 16:29:12 08/05/04 (1)
    • Re: This weekend... - Mike E 17:28:55 08/05/04 (0)
  • Please shoot pics for strut/spring job - Greg J 08:55:49 08/05/04 (0)
  • great idea - Peter Florance 03:15:06 08/05/04 (1)
    • strut / cartridge replacement. . - NECK SMITH - Houston 11:51:45 08/05/04 (0)
• G'day - QWK-520 16:32:42 08/04/04 (4)
  • That's it - you just joined! - Mike E 17:45:17 08/04/04 (3)
    • Re: That's it - you just joined! - QWk-520 06:37:44 08/05/04 (2)
      • Wasnt that easy! - Michael R from Melbourne 14:55:36 08/05/04 (1)
        • Re: Wasnt that easy! - QWk-520 18:40:25 08/05/04 (0)
• Saw another e12 for sale - Michael R from Melbourne 15:56:49 08/04/04 (3)
  • That'd be an E12/8 like my '83 Rubinrot - Remy Davison 06:20:08 08/05/04 (1)
    • Re: That'd be an E12/8 like my '83 Rubinrot - Michael R from Melbourne 15:04:58 08/05/04 (0)
  • Re: Saw another e12 for sale - QWK-520 16:41:53 08/04/04 (0)
• Pair of Centerline Wheels - John in Simi Valley 11:53:29 08/04/04 (2)
  • Re: Pair of Centerline Wheels - Bill 11:55:40 08/04/04 (1)
    • Re: Pair of Centerline Wheels - John in Simi Valley 12:03:20 08/04/04 (0)
• What seats from other models bolt right up????? - Noel in LA 10:22:49 08/04/04 (2)
  • Re: What seats from other models bolt right up????? - Jason 16:22:36 08/04/04 (1)
    • thanks - Noel in LA 08:48:55 08/05/04 (0)
• strange after-overhaul problem - cameron 10:12:11 08/04/04 (1)
  • Re: strange after-overhaul problem - QWK- 16:37:28 08/04/04 (0)
• Selling a new Zender trunk Spoiler for an E12 - Mike in Seattle 06:47:42 08/04/04 (0)
• selling my e12........... - jim at da shop 23:59:17 08/03/04 (0)
• Drive shafts and flex disks - Jeff C 21:02:25 08/03/04 (0)
• Throttle Linkage - Bill 18:46:31 08/03/04 (2)
  • Re: Throttle Linkage - T.Han 19:15:15 08/03/04 (1)
    • Re: Throttle Linkage - Bill 20:11:49 08/03/04 (0)
• e28 radiator upgrade - Michael R from Melbourne 17:51:57 08/03/04 (4)
  • Which PickaPart is that? - Mike E 20:46:14 08/03/04 (1)
    • Re: Which PickaPart is that? - Campbellfield - Michael R from Melbourne 15:53:04 08/04/04 (0)
  • M30 engine - Mike W. 19:08:28 08/03/04 (1)
    • Re: M30 engine - Mark 00:25:40 08/04/04 (0)
• need air hose part # and therm. housing - Jason 17:09:08 08/03/04 (1)
  • Re: need air hose part # and therm. housing - ChuckNC 18:27:09 08/03/04 (0)
• That link about rape below should be removed. - Bill 15:45:52 08/03/04 (1)
  • I agree... - Ken AZ 10:47:22 08/05/04 (0)
• anyone know a good shop in sw oregon? - stewart in slc 14:50:22 08/03/04 (2)
  • Re: anyone know a good shop in sw oregon? - Martin 22:00:36 08/03/04 (1)
    • anyone know a good (cheap) $shop in sw Houston ! - Jaime Obando 11:54:02 08/05/04 (0)
• free rape stories - rape stories 13:33:04 08/03/04 (0)
• Spark Plug Wires a $100 dollars question ?$?$ - Neck Smith 09:06:55 08/03/04 (6)
  • Cracks and resistance - John in Simi Valley 12:02:12 08/04/04 (1)
    • Hundred Bucks - John in Simi, again 12:08:13 08/04/04 (0)
  • Re: Spark Plug Wires a $100 dollars question ?$?$ - Bill 06:56:24 08/04/04 (0)
  • Re: Spark Plug Wires a $100 dollars question ?$?$ - Mike W. 19:01:19 08/03/04 (0)
  • Re: Spark Plug Wires a $100 dollars question ?$?$ - Ryan Bryan 09:56:21 08/03/04 (0)
  • Re: Spark Plug Wires a $100 dollars question ?$?$ - Troy Rudolph 09:51:28 08/03/04 (0)
• Springs and things - Mike E 03:52:39 08/03/04 (5)
  • Re: Springs and things - T.Han 19:19:49 08/03/04 (4)
    • Why Not Cut Springs? - Mike in Chicago 11:40:51 08/04/04 (0)
    • Re: Springs and things - Michael R from Melbourne 20:46:59 08/03/04 (1)
      • Re: Springs and things - Mike E 22:05:15 08/03/04 (0)
    • Re: Springs and things - Mike E 20:34:46 08/03/04 (0)
• Air Fuel Mixture - oz Jeff 03:50:00 08/03/04 (5)
  • Idle Mixture Adjustment - Peter Florance 04:00:42 08/03/04 (4)
    • Peter, does that test work also for lambda cars? - Brian in Abilene 14:50:44 08/03/04 (2)
      • Re: Peter, does that test work also for lambda cars? - Peter Florance 03:17:18 08/05/04 (1)
        • Thanks! (eom) - Brian in Abilene 05:52:03 08/05/04 (0)
    • Re: Idle Mixture Adjustment - oz Jeff 04:56:03 08/03/04 (0)
• Auxiliary Fan doesn't come on when A/C is on ?#!@ - Neck Smith 00:20:33 08/03/04 (5)
  • Re: Auxiliary Fan doesn't come on when A/C is on ?#!@ - Robert Bondi 06:08:46 08/03/04 (4)
    • Auxiliary Fan doesn't come on when A/C is on ?#!@ - Andres Moreno 08:32:14 08/03/04 (3)
      • also consider 82C aux fan switch - Robert Bondi 21:28:46 08/03/04 (0)
      • Ballast resistor, or a poor mans fix (long) - Mike W. 18:55:23 08/03/04 (1)
        • $10 for a non-Bosch generic part that works - Remy Davison 06:31:14 08/05/04 (0)
• Saved $140.00 thanks to Technical FAQ - Jaime Obando in Hot Steamy Houston 00:08:50 08/03/04 (1)
  • awesome, that's great to hear!! - Adam Wilson in Chicago 20:38:20 08/03/04 (0)
• Restoring 1975 530I - Jonathan 21:27:20 08/02/04 (6)
  • Suggestion... - Randy 76/530 09:50:29 08/06/04 (0)
  • most of the panels are still available - Adam Wilson in Chicago 20:48:27 08/03/04 (0)
  • Re: Restoring 1975 530I - Ryan Bryan 10:04:59 08/03/04 (0)
  • Re: Restoring 1975 530I - Misha 10:01:55 08/03/04 (2)
    • Re: Restoring 1975 530I - Mark 12:23:00 08/03/04 (1)
      • Re: Restoring 1975 530I - Jonathan 20:59:33 08/05/04 (0)
• E12 =handles like a Corvair? :-( - Canada Karl 18:47:07 08/02/04 (14)
  • 78 and earlier Oz E12s got stock Euro suspension - Remy Davison 23:38:59 08/02/04 (0)
  • Gosh, could they have meant like any of these>>> - Lars Olbimmerguy 21:32:18 08/02/04 (5)
    • ooops the link! - Lars.... 21:33:11 08/02/04 (4)
      • Re: ooops the link! - Canada Karl 17:32:02 08/03/04 (3)
        • Later ones were pretty good, but - Mike W. 18:29:11 08/03/04 (2)
          • The 65 was the newer body style, and may note... - Lars Olbimmerguy 21:26:41 08/03/04 (1)
            • Re: The 65 was the newer body style, and may note... - Canada Karl 16:22:48 08/04/04 (0)
  • Not perfect, but not as bad as that - Mike W. 21:03:27 08/02/04 (4)
    • Re: Not perfect, but not as bad as that - Canada Karl 17:13:51 08/03/04 (1)
      • Definitely - Mike W. 21:20:48 08/04/04 (0)
    • Re: Mike what happenend to the springs? - Mchael K 21:23:59 08/02/04 (1)
      • Long gone - Mike W. 18:34:36 08/03/04 (0)
  • Re: E12 =handles like a Corvair? :-( - Michael R from Melbourne 20:05:59 08/02/04 (1)
    • e12 suspension - Mark 03:33:43 08/03/04 (0)
• Ignore my last post. figured it out. - Canada Karl 16:38:38 08/02/04 (0)
• Unable to Read Article posted here??? - Canada Karl 16:35:30 08/02/04 (0)
• Another clean Cali e12 - Bob in San Jose 14:27:15 08/02/04 (0)
• Who's STUPID enough to pay $900 to ship $800 E12? - Jeff Olson 14:06:06 08/02/04 (13)
  • I did it!! - sort of - Nathan in Spokane 19:14:43 08/04/04 (0)
  • Re: Who's STUPID enough to pay $900 to ship $800 E12? - Bob Humphrey 21:50:27 08/03/04 (0)
  • bonding with the new ride - Adam Wilson in Chicago 20:50:29 08/03/04 (0)
  • How about a X-C bank robbing spree in the E12? - Jeff Olson 07:31:30 08/03/04 (3)
    • if you watch the movie "Bandits" with Bruce Willis - Frank H 08:37:46 08/03/04 (1)
      • Cate Blanchett? - Bill In Michigan 17:19:43 08/03/04 (0)
    • Re: How about a X-C bank robbing spree in the E12? - Chris Hollis 08:22:10 08/03/04 (0)
  • Re: Who's STUPID enough to pay $900 to ship $800 E12? - ChuckNC 21:37:28 08/02/04 (0)
  • Re: Who's STUPID enough to pay $900 to ship $800 E12? - davidnyc 20:45:29 08/02/04 (0)
  • take the roadtrip!!! - eric in denver 20:11:52 08/02/04 (0)
  • Re: Who's STUPID enough to pay $900 to ship $800 E - T.Han 16:52:08 08/02/04 (0)
  • Who's stupid........ - Chris Hollis 14:43:40 08/02/04 (0)
  • I am or would be... - Misha 14:22:47 08/02/04 (0)
• my 525 - dzubaila mihai 11:33:29 08/02/04 (1)
  • Re: my 525 - ChuckNC 21:47:00 08/02/04 (0)
• 1980 528i - Greek 07:45:55 08/02/04 (1)
  • Check the water pump and - Mike W. 09:37:00 08/02/04 (0)
• Obtaining Bavarian manifolds and downpipes - Bill 20:35:57 08/01/04 (8)
  • Go Postal! - ChuckNC 21:41:54 08/02/04 (0)
  • You definitely want the E3 manifolds, as opposed - Lars Olbimmerguy 14:57:12 08/02/04 (2)
    • E28 (533i/535i) manifolds are good too (eom) - Troy Rudolph 15:38:59 08/02/04 (1)
      • Re: E28 (533i/535i) manifolds are good too (eom) - Sam R. 10:39:01 08/04/04 (0)
  • Re: Obtaining Bavarian manifolds and downpipes - Mike in Chicago 11:40:15 08/02/04 (2)
    • All BMW's use Bavarian manifolds - Velocewest 12:22:05 08/02/04 (1)
      • Specifically, 1969-1974 e3 - Velocewest 12:24:41 08/02/04 (0)
  • I can help - 2002sue 22:37:54 08/01/04 (0)
• 528i vs. 530i - JessinCA 20:05:29 08/01/04 (3)
  • Engine management - Mike W. 09:42:36 08/02/04 (0)
  • Re: 528i vs. 530i - Peter Florance 03:55:59 08/02/04 (1)
    • Re: 528i vs. 530i - Mark 11:45:03 08/02/04 (0)
• NEW theory on 70's/80's BMW's worth having... - Jeff Olson 16:40:32 08/01/04 (11)
  • My e21 323i has 4 wheel disc, 5 speed, 6 cyl... - Velocewest 12:34:14 08/02/04 (1)
    • Re: My e21 323i has 4 wheel disc, 5 speed, 6 cyl... - Jaime Obando 19:37:03 08/02/04 (0)
  • E12s, E23s and E21s are all worth having - Remy Davison 00:19:08 08/02/04 (4)
    • Re: E12s, E23s and E21s are all worth having - reading article 12:43:42 08/02/04 (1)
      • What browser? - Mike E 13:35:18 08/02/04 (0)
    • Re: E12s, E23s and E21s are all worth having - reading article 12:42:42 08/02/04 (0)
    • Re: E12s, E23s and E21s are all worth having - Scott in Melb 01:29:38 08/02/04 (0)
  • A rush to defend the E23.... I love e12s, but also - Lars Olbimmerguy 19:03:46 08/01/04 (0)
  • Oh, you just yanked my chain... - Eric Q 17:20:27 08/01/04 (2)
    • Having owned E's 3, 12, 21, 23, 24, and 28 - Mike W. 09:51:33 08/02/04 (0)
    • a few e23's vrs e12 - papajimmm nh 23:00:40 08/01/04 (0)
• e12 in Vernon NJ (rt 94 & rt 515) - papajimmm nh 15:40:16 08/01/04 (0)
• Car of the Month - August - Troy Rudolph (Webmaster) 15:02:31 08/01/04 (1)
  • Great car-and the light makes it look - Remy Davison 00:24:57 08/02/04 (0)
• who do I pay for successful ad??? - Ryan Bryan 14:14:39 08/01/04 (1)
  • Sponsor's Page - Peter Florance - First Fives Dictator for Life 16:56:36 08/01/04 (0)
• Tires Slanted? - F.E. 13:54:39 08/01/04 (1)
  • Same thing on mine - Luke 15:08:28 08/02/04 (0)
• Intercoolers - 0z Jeff 08:36:41 08/01/04 (1)
  • Re: Intercoolers - Aaron from Aus 08:46:29 08/02/04 (0)
• Headers - oz Jeff 08:26:38 08/01/04 (4)
  • i hae them on my E28 RHD - Aaron from Aus 08:37:45 08/02/04 (2)
    • Re: i had them on my RHD - but underbonnet temp? - Mango 10:18:53 08/02/04 (1)
      • They are fine.... - Aaron from Aus 00:56:40 08/03/04 (0)
  • Re: Headers - Mark 11:46:13 08/01/04 (0)
• E12- ECU for 76' 530i - Fred 07:59:21 08/01/04 (1)
  • Re: E12- ECU for 76' 530i - Peter Florance 09:02:55 08/01/04 (0)
• Aux Air Valve - oz Jeff 21:45:11 07/31/04 (1)
  • Re: Aux Air Valve - Gerry ACT/Oz 23:16:39 07/31/04 (0)
• Throttle Body Coolant chamber - oz Jeff 21:32:55 07/31/04 (4)
  • Re: Throttle Body Coolant chamber - Walt Barie 08:28:19 08/04/04 (0)
  • Re: Throttle Body Coolant chamber - Frank H 08:40:16 08/01/04 (0)
  • Re: Throttle Body Coolant chamber - Troy Rudolph 22:53:30 07/31/04 (0)
  • I'm not sure, but - Mike W. 21:44:08 07/31/04 (0)
• New owner of a 1977 530i - Bill 17:03:32 07/31/04 (5)
  • Re: New owner of a 1977 530i - Robert Bondi 03:02:56 08/01/04 (3)
    • Re: New owner of a 1977 530i - Bill 13:18:56 08/01/04 (2)
      • Bavaria Headers - ChuckNC 05:30:29 08/02/04 (0)
      • Re: New owner of a 1977 530i - Robert Bondi 18:19:48 08/01/04 (0)
  • Re: New owner of a 1977 530i - andrey 18:54:41 07/31/04 (0)
• Supercharger - Oz Jeff 16:51:51 07/31/04 (7)
  • Click the link to see a 4AGZE charger on an M30 - Troy Rudolph 17:41:58 07/31/04 (0)
  • Aaron has, I'm about to - Mike E 17:24:03 07/31/04 (5)
    • Chime in i will... - Aaron from Aus 00:55:47 08/01/04 (4)
      • Interesting - oz Jeff 08:17:44 08/01/04 (1)
        • Re: Interesting - Aaron from Aus 08:30:43 08/02/04 (0)
      • online machine shop - Mike E 04:06:13 08/01/04 (1)
        • WOW, that is awesome.. - Aaron from Aus 07:42:06 08/01/04 (0)
• Ot...an attempt at fraud or is it real??? (long) - Ryan Bryan 16:08:24 07/31/04 (7)
  • The routine... as I have seen it. - Lars Olbimmerguy 22:07:27 07/31/04 (0)
  • Re: Ot...an attempt at fraud or is it real??? (long) - Grant 18:18:23 07/31/04 (2)
    • Re: Ot...an attempt at fraud or is it real??? (long) - Ryan Bryan 20:16:02 07/31/04 (1)
      • scam - greghill-phx,az 11:41:18 08/01/04 (0)
  • It does seem odd ... - Troy Rudolph 16:39:15 07/31/04 (0)
  • Re: Ot...an attempt at fraud or is it real??? (long) - brian 16:17:19 07/31/04 (0)
  • Wouldn't consider even thinking about it - Matt C 16:17:17 07/31/04 (0)
• cat for sale - 2002sue 16:03:37 07/31/04 (0)
• running rich - brian 15:39:52 07/31/04 (3)
  • Could be several things, but - Mike W. 21:51:25 07/31/04 (0)
  • Re: running rich - Karl in KS 19:21:10 07/31/04 (1)
    • Re: running rich/ replaced o2 sensor and temp - brian 22:32:34 07/31/04 (0)
• Evil Rust at Lower Front of Door???? - Canada Karl 15:19:13 07/31/04 (2)
  • Re: Evil Rust at Lower Front of Door???? - Mike W. 21:48:00 07/31/04 (0)
  • Re: Evil Rust at Lower Front of Door???? - brian 16:11:40 07/31/04 (0)
• E12 headliner replacement? Who's done it? - Jeff Olson 20:49:33 07/30/04 (2)
  • Re: E12 headliner replacement? Who's done it? - Bernie 16:08:57 07/31/04 (0)
  • I'm about to... - Mike E 05:32:02 07/31/04 (0)
• Hood Related problem - Bill Hynes 14:24:28 07/30/04 (1)
  • Re: Hood Related problem - Robert Bondi 10:20:50 07/31/04 (0)
• bad tire wear... related to below post Help please - Preston in Spokane 13:17:27 07/30/04 (1)
  • Have you checked the toe in? - Mike W. 18:46:02 07/30/04 (0)
• Good sourse for control arms and bushings!!??? - Preston in Spokane 13:07:50 07/30/04 (3)
  • And, BTW ... - Troy Rudolph 16:08:38 07/30/04 (0)
  • Re: Good source for control arms and bushings!!??? - Troy Rudolph 16:04:59 07/30/04 (0)
  • Re: Good sourse for control arms and bushings!!??? - Chris Hollis 13:46:28 07/30/04 (0)
• 78 530i for sale - matt kimberlin 10:42:37 07/30/04 (0)
• Exhaust leak - H. Strong. 10:25:03 07/30/04 (3)
  • Re: Exhaust leak - Troy Rudolph 08:44:23 07/31/04 (1)
    • I don't think so... - Mike W. 21:41:39 07/31/04 (0)
  • Re: Exhaust leak - Mike W. 18:48:59 07/30/04 (0)
• Timing/pinging issues continued. - Justin in C'ville 07:34:43 07/30/04 (2)
  • Re: Timing/pinging issues continued. - Peter Florance 13:27:46 07/30/04 (1)
    • Pinging prob Fixed! - Justin in C'ville 19:30:34 07/31/04 (0)
• Got some pictures of my E12 - Rami 01:24:38 07/30/04 (0)
• Would a burnout tell me if my diff is a lsd - Rami 23:39:44 07/29/04 (6)
  • Well, I've been called a burnout (and worse)... - Ken AZ 23:07:22 08/05/04 (0)
  • Re: Would a burnout tell me if my diff is a lsd - Karl in KS 19:34:32 07/31/04 (0)
  • Re: Would a burnout tell me if my diff is a lsd - James from New Zealand 17:00:37 07/31/04 (0)
  • Re: It might, but........ - Bill Bowes 10:25:27 07/31/04 (0)
  • Re: Would a burnout tell me if my diff is a lsd - Eddie in TO 12:20:40 07/30/04 (0)
  • not if the lsd clutchpack is blown - RDAvena 07:06:15 07/30/04 (0)
• Had a good week. - Michael R from Melbourne 23:30:47 07/29/04 (5)
  • I treated the leather - Remy Davison 00:35:54 08/01/04 (0)
  • To cap it off... (long) - Mike E 04:58:54 07/30/04 (3)
    • How much for the blower? - Aaron from Aus 07:27:00 07/30/04 (2)
      • Re: How much for the blower? - Mike E 14:52:33 07/30/04 (1)
        • Ive been wanting to get into the CAD CNC thing.. - Aaron from Aus 00:58:10 08/01/04 (0)
• Finally Got a CD player but..... - Dan Lafley 22:20:32 07/29/04 (0)
• found euro 635...is it LSD - eric in denver 18:26:30 07/29/04 (3)
  • Re: Is it LSD or cocaine? - Michael R from Melbourne 23:11:19 07/29/04 (0)
  • Maybe some help - Mike W. 21:11:18 07/29/04 (1)
    • Sideloaders often had the "S" stamped on the case - Velocewest 09:53:54 07/30/04 (0)