Please visit our home page for FAQs and other information.
First Fives Bulletin Board Archive XLII
(2004/12/18 - 2005/01/30)
This board is inactive. It is for archival purposes only. Please visit the active board at
FirstFives.org
.
[
First Fives Home
] [
Board Archives
]
Interior pieces needed for 79 e12
-
jason
17:40:23 01/30/05
(0)
other BMW cars help site
-
gary in west Oz
17:15:51 01/30/05
(0)
Vintage at the vineyards Winston-salem, NC May 7th
-
Sam Schultz
16:31:10 01/30/05
(0)
Pedal misadventures.
-
Mike E
16:00:16 01/30/05
(1)
Re: Pedal misadventures.
-
ckn
17:38:37 01/30/05
(0)
BMW 518 Automatic
-
Peter Hutchison
01:33:39 01/30/05
(2)
Re: BMW 518 Automatic
-
Remy Davison
06:20:04 01/30/05
(1)
Re: BMW 518 Automatic
-
Mark
10:16:08 01/30/05
(0)
4-Speed Trans on eBay
-
Chris in Laguna Beach
19:50:04 01/29/05
(4)
I have two of these in the Garage...
-
Scott ATL
08:27:38 01/30/05
(3)
That's the plan....
-
Chris in Laguna Beach
08:40:25 01/30/05
(2)
Oh, I didnt know that was yours...
-
Scott ATL
09:22:50 01/30/05
(1)
No Worries..
-
Chris in Laguna Beach
09:32:29 01/30/05
(0)
FS: Getrag 265 5-speed OD Transmission
-
Chris in Laguna Beach
19:45:40 01/29/05
(0)
FS: Momo Alpina Steering Wheel, and more
-
Chris in Laguna Beach
17:26:39 01/29/05
(1)
Mail Me...
-
Mike
19:34:50 01/29/05
(0)
E12 snowmobile? A little snow and ice in NC...
-
Jeff Olson
13:16:36 01/29/05
(3)
HAHAHAHA
-
Mike
19:39:48 01/29/05
(0)
Shuda dated gurlz!
-
Lars OBG
18:31:40 01/29/05
(0)
Re: E12 snowmobile? A little snow and ice in NC...
-
Chris Hollis
16:49:23 01/29/05
(0)
YaY! LSD!
-
Dan J
09:17:09 01/29/05
(8)
I talked to this guy, has 635CSI to part, MORE...
-
Jeff Olson
12:36:49 01/29/05
(2)
Hey Jeff...
-
Mike
19:42:12 01/29/05
(1)
Mike, send me an e-mail off-post...
-
Jeff Olson
06:38:35 01/30/05
(0)
Yep, that's the one
-
Mike W.
10:27:01 01/29/05
(4)
Re: Yep, that's the one
-
Dan J
00:27:54 01/30/05
(3)
It would fit, but...
-
Mike W.
11:13:59 01/30/05
(2)
Re: It would fit, but...
-
Dan J
14:42:31 01/30/05
(1)
Re: It would fit, but...
-
Blair
15:41:06 01/30/05
(0)
E12 Front Bumper ebay
-
Mark
07:23:12 01/29/05
(7)
If you want I have 3...
-
Scott ATL
12:31:37 01/29/05
(5)
Hah! I've still got the ones I got from Jeff...
-
Tulsa Dave
17:27:43 01/29/05
(2)
Ship'em Dave!
-
Scott ATL
19:19:47 01/29/05
(1)
Scott to the courtesy phone...
-
Lenny D.
21:46:21 01/29/05
(0)
Conformist!
-
Robert Bondi HoustonTX
13:23:25 01/29/05
(1)
Re: Conformist!
-
Scott ATL!!
19:20:35 01/29/05
(0)
Re: E12 Front Bumper ebay
-
Ernie
08:01:06 01/29/05
(0)
Cheap (new) 77-81 tail light lenses
-
Remy Davison
07:17:35 01/29/05
(2)
Re: Cheap (new) 77-81 tail light lenses
-
Joe
17:54:31 01/29/05
(1)
check the web address
-
papajimmm NH 81 528i
11:20:56 01/30/05
(0)
New ignition switch did not work...
-
Bill Hynes
16:42:51 01/28/05
(4)
Re: New ignition switch did not work...
-
Mike W.
19:34:47 01/29/05
(0)
If the push button works that points very>>
-
Craig in Davis
18:20:21 01/28/05
(1)
By part of ignition switch I mean>>>
-
Craig in Davis
18:22:39 01/28/05
(0)
Re: New ignition switch did not work...
-
mattp in Melb
17:40:13 01/28/05
(0)
Noobie with E12 M535i
-
Ross Cox
08:23:41 01/28/05
(2)
Pedders suspension parts for e12
-
Mike E
12:43:32 01/28/05
(1)
Welcome to the e12 board
-
Michael R from Melbourne
22:31:41 01/28/05
(0)
Bugger, I broke it (Long)
-
MattP
00:03:14 01/28/05
(17)
Re: Bugger, I broke It
-
ckn
00:40:48 01/29/05
(0)
Update on cause of oops
-
MattP
18:49:37 01/28/05
(3)
Be wary with the E28 520 (long)
-
Remy Davison
05:02:29 01/29/05
(2)
Re: Be wary with the E28 520 (long)
-
mattp
14:55:36 01/29/05
(1)
Re: Be wary with the E28 520 - I agree
-
Michael R from Melbourne
17:32:04 01/29/05
(0)
Glad you are OK, possesions can be repaired>>
-
Craig in Davis
18:24:59 01/28/05
(0)
Were you wearing a seat belt???
-
Eric Q
16:43:21 01/28/05
(1)
Re: Were you wearing a seat belt???
-
mattp
17:23:27 01/28/05
(0)
Geez, Matt, glad you're OK
-
Velocewest
13:28:34 01/28/05
(0)
Re: Bugger, I broke it (Long)
-
Tim from Aus
07:26:19 01/28/05
(0)
Glad your ok...
-
Scott ATL
05:59:33 01/28/05
(0)
Re: Bugger, I broke it (Long)
-
Scott in Melb
02:47:10 01/28/05
(1)
Re: Bugger, I broke it (Long)
-
mattp
03:18:32 01/28/05
(0)
Re: Bugger, I broke it (Long)
-
james
00:30:58 01/28/05
(3)
Re: Bugger, I broke it (Long)
-
mattp
00:42:24 01/28/05
(2)
Sorry to hear that, Matt
-
Remy Davison
04:25:48 01/28/05
(1)
That's terrible news Matt!
-
Michael R from Melbourne
22:39:18 01/28/05
(0)
'80 on Roadfly
-
T.Han
22:05:21 01/27/05
(0)
Sam Schultz, drop me an e-mail, more...
-
Jeff Olson
18:45:04 01/27/05
(0)
Hey Frank, This is ALL you...
-
Scott ATL
17:53:47 01/27/05
(1)
I bought that...
-
Velocewest
09:56:04 01/28/05
(0)
Exhaust porting benefit
-
Rich in Savannah
12:11:49 01/27/05
(4)
Thanks! (e)
-
Rich in Savannah
06:31:04 01/28/05
(0)
there is some benifit on a performnace engine
-
Sam
16:02:42 01/27/05
(1)
Thanks for the Slide show, Awesome! nt
-
Scott ATL
17:22:42 01/27/05
(0)
It is all relative to the type of motor...
-
Scott ATL
14:35:02 01/27/05
(0)
Question about the ignition switch
-
Bill Hynes
12:08:58 01/27/05
(3)
Lock and switch
-
Mike W.
18:25:18 01/27/05
(0)
Re: Question about the ignition switch
-
ChuckNC
12:42:53 01/27/05
(0)
Re: Question about the ignition switch
-
Lou in Denver
12:35:34 01/27/05
(0)
four 14" alloy wheels from'81 528i, free
-
Ben Standish
10:48:23 01/27/05
(1)
do you have any pics?nt
-
stewart in slc
23:33:24 01/27/05
(0)
my car wont start
-
Ryan Bryan
09:37:47 01/27/05
(5)
It's not cranking ?
-
Matt Evans
10:46:41 01/27/05
(4)
Re: It's not cranking ?
-
Ryan Bryan
11:30:56 01/27/05
(3)
Re: It's not cranking ?
-
...tom
12:13:36 01/27/05
(2)
Re: It's not cranking ?
-
Tim from Aus
16:22:42 01/27/05
(1)
Re: It's not cranking ?
-
mattp from melb
18:51:57 01/27/05
(0)
Anyone have open Carfax? >>>
-
Craig in Davis
07:50:07 01/27/05
(0)
Melbourne Fives meet late Feb?
-
ckn
02:09:44 01/27/05
(5)
Re: Melbourne Fives meet late Feb?
-
Remy Davison
03:47:46 01/27/05
(4)
Re: Melbourne Fives meet late Feb?
-
Aaron from Oz
03:59:46 01/27/05
(3)
Either date suits me
-
Michael R from Melbourne
15:52:07 01/27/05
(2)
Re: Either date suits me
-
mattp
18:44:59 01/27/05
(1)
Re: Either date suits me
-
mattp
00:44:22 01/28/05
(0)
anone with money to burn...16" HARTGE wheels
-
eric in denver
22:48:17 01/26/05
(3)
The price is going up as his supply goes down
-
Eric Q
17:50:48 01/27/05
(1)
I think Hartge are better looking JMO N/T
-
Jim
19:16:39 01/27/05
(0)
Inexpensive compared to Alpina's
-
Misha
08:10:09 01/27/05
(0)
Fuel pump combo relay,
-
Drew
20:50:22 01/26/05
(3)
They're about $60 new from all the usual suspects
-
Velocewest
21:13:06 01/26/05
(2)
I paid $10 each from Pick N Pull. Spare avail>>
-
Craig in Davis
07:05:32 01/27/05
(1)
Re: I paid $10 each from Pick N Pull. Spare avail>>
-
Sure,
20:08:33 01/27/05
(0)
Hey John in Simi, since you asked...
-
Velocewest
20:25:16 01/26/05
(1)
Yo, dont forget...
-
Scott ATL
17:43:56 01/27/05
(0)
WTB: Downshift Cable for 3HP22 '24 34 1 209 571'
-
Klaus
18:01:16 01/26/05
(0)
Parting out 77 530i
-
Jamie Seattle
15:52:06 01/26/05
(2)
Check your email...nt
-
Scott ATL
17:12:30 01/26/05
(0)
I am.....
-
Dan Lafley
17:09:03 01/26/05
(0)
Bimmer Parts Company/Maximillian MERGED?
-
Jeff Olson
15:25:13 01/26/05
(6)
Re: Bimmer Parts Company/Maximillian MERGED?
-
Troy Rudolph
21:37:28 01/26/05
(0)
yes, more
-
Sam Schultz
16:30:56 01/26/05
(4)
Who's your favorite (cheapest!) now?
-
Jeff Olson
17:12:28 01/26/05
(3)
I buy 95% local cause when I need help they are
-
Sam
19:11:53 01/26/05
(0)
Steve Haygood
-
Mike W.
18:20:46 01/26/05
(1)
Re: Steve Haygood
-
Aaron from Oz
04:11:12 01/27/05
(0)
Master Cylinder '75 528 / '80 528i the same?
-
ckn
15:20:19 01/26/05
(5)
Re: Master Cylinder '75 528 / '80 528i the same?
-
Michael R from Melbourne
17:18:29 01/26/05
(4)
Reseda's fan went straight onto the Polaris...
-
Remy Davison
04:06:30 01/27/05
(0)
thanks michael,
-
ckn
20:23:38 01/26/05
(0)
You got ANOTHER parts car?
-
Mike E
17:48:25 01/26/05
(1)
And your problem is.....?
-
Michael R from Melbourne
16:02:06 01/27/05
(0)
3.0/3.3 to 3.5
-
fidosd9
15:10:05 01/26/05
(4)
Re: 3.0/3.3 to 3.5
-
Mike W.
19:43:25 01/26/05
(3)
Re: 3.0/3.3 to 3.5
-
fidosd9
01:19:52 01/27/05
(2)
Re: 3.0/3.3 to 3.5
-
Mike W.
18:17:53 01/27/05
(0)
Re: 3.0/3.3 to 3.5
-
Velocewest
15:07:05 01/27/05
(0)
Paging Releaf1, you have mail...nt
-
Scott ATL
12:24:21 01/26/05
(0)
Auto Fluid Change time(long).....
-
Dan lafley
12:09:26 01/26/05
(2)
Re: Auto Fluid Change time(long).....
-
Mike W.
22:35:56 01/26/05
(1)
Don't use synthetic or additives
-
Remy Davison
04:13:01 01/27/05
(0)
Rolling Fenders. Anybody have recommendations
-
Misha
09:48:53 01/26/05
(7)
Re: Rolling Fenders. Hammer and dolly
-
Matt D UK
15:13:16 01/27/05
(0)
I used pliers
-
Karl in KS
20:20:18 01/26/05
(0)
I did this to my 528
-
ckn
15:34:00 01/26/05
(0)
I have....
-
Mike
15:30:07 01/26/05
(0)
Hey Misha...
-
Scott ATL
12:29:23 01/26/05
(1)
Check your email
-
Misha
17:23:14 01/26/05
(0)
Re: Rolling Fenders. Anybody have recommendations
-
eric in denver
12:23:21 01/26/05
(0)
e12 on the news
-
ChuckNC
06:29:37 01/26/05
(5)
Re: e12 on the news
-
NC Doug
07:21:30 01/27/05
(0)
My wife is coming along nicely...
-
Nate in Utah
10:53:38 01/26/05
(1)
take that woman to dinner! (nt)
-
ChuckNC
13:54:14 01/26/05
(0)
E12 Geeks unite!
-
Nick in Co Springs
07:20:41 01/26/05
(1)
If she's anything like my wife...
-
Damien in Sydney
14:26:34 01/26/05
(0)
Black UK 525 E12
-
Philip UK
05:54:49 01/26/05
(13)
Re: Hi Phil
-
Matt D UK
15:43:14 01/27/05
(0)
UK Phil?
-
ChuckNC
06:34:06 01/26/05
(3)
Hi Chuck - you are so right! If I can dispose of
-
Philip UK
07:13:08 01/26/05
(2)
Phil, check out www.e12.de
-
Remy Davison
04:22:58 01/27/05
(1)
Thanks for the link & info Remy - Are your cars in
-
Philip UK
07:13:14 01/27/05
(0)
sharp car, but I'd wait for an E12 M535i
-
Adam Wilson in Chicago
06:22:09 01/26/05
(7)
Have you a link to the 535 group Adam?
-
Philip UK
06:30:24 01/26/05
(6)
oh yeah, the snow sucks
-
Adam Wilson in Chicago
06:40:29 01/26/05
(3)
E12 M535i >>> just bought one!
-
Ross in Western Australia
09:06:30 01/28/05
(0)
Yeah man!
-
Scott ATL
12:32:47 01/26/05
(0)
Hardly any E12's left over here. Most have
-
Philip UK
07:11:11 01/26/05
(0)
E12 M535i group
-
Adam Wilson in Chicago
06:36:16 01/26/05
(1)
The white M535i is beautiful and thanks for the...
-
Philip UK
07:00:41 01/26/05
(0)
750i Brakes does fit on a E9
-
Zolka
03:18:53 01/26/05
(5)
Re: 750i Brakes - Or not !?
-
Niklas Edlund - Motronic E12
05:23:42 01/26/05
(4)
750i Brakes are the same in E39
-
Zolka
00:29:15 01/27/05
(3)
Re: 750i Brakes are the same in E39
-
Niklas Edlund - Motronic E12
01:55:59 01/27/05
(2)
yes the same parts
-
ZOlka
10:25:16 01/27/05
(1)
Ventillated disk to the rear
-
Zolka
10:59:29 01/27/05
(0)
That was a lot of unhappy looking smoke!
-
Edward Beech
22:21:34 01/25/05
(6)
My findings (pictures)
-
Edward Beech
01:51:57 01/26/05
(3)
Is it possibly the brake booster check valve...
-
Brian in Oxnard
11:15:16 01/26/05
(2)
If you blew off a vacuum line
-
Karl in KS
20:38:07 01/26/05
(1)
Re: If you blew off a vacuum line
-
Edward Beech
20:58:16 01/26/05
(0)
Maybe the head gasket is blown?
-
Hans V.
23:32:42 01/25/05
(1)
Re: Maybe the head gasket is blown?
-
Edward Beech
23:45:24 01/25/05
(0)
valve adjust ?
-
eric in denver
19:35:30 01/25/05
(6)
The "Book" says .010 to .012
-
John in Simi Valley
10:42:01 01/26/05
(1)
oh..than .015 should be good ;)
-
eric in denver
21:39:42 01/26/05
(0)
A "tight" .012 , , , , that is , , ,
-
oilslick
20:38:42 01/25/05
(0)
Re: valve adjust ?
-
Edward Beech
19:42:05 01/25/05
(2)
I agree. . .010 would be the ideal
-
Jaime Obando
14:46:58 01/28/05
(1)
Re: I agree. . .010 would be the ideal
-
Edward Beech
19:13:05 01/29/05
(0)
Shift plate bushings
-
Edward Beech
19:09:09 01/25/05
(2)
Good job, EB!
-
Velocewest
21:36:40 01/25/05
(1)
no worries
-
greghill-phx.az
21:52:57 01/25/05
(0)
Let me just say this....(Longish)
-
Scott ATL
17:39:23 01/25/05
(4)
Re: Let me just say this....(Longish)
-
Ryan Bryan
20:16:20 01/25/05
(1)
Amen. (partially off topic ramble)
-
Edward Beech
20:22:25 01/25/05
(0)
Re: Let me just say this....(Longish)
-
Edward Beech
19:25:17 01/25/05
(1)
Re: Let me just say this....(Longish)
-
Philip UK
08:00:58 01/26/05
(0)
Second call for First Five T-Shirts...
-
Eric Q
17:16:50 01/25/05
(5)
Re: Second call for First Five T-Shirts...
-
Niklas Edlund - Sweden
05:28:43 01/26/05
(0)
ETA?
-
Velocewest
21:39:14 01/25/05
(1)
Probably beginning of March...
-
Eric Q
22:53:14 01/25/05
(0)
two XL for me
-
papajimmm nh 81 528i
17:50:56 01/25/05
(1)
If you sent me an e-mail, then I have it....
-
Eric Q
22:54:14 01/25/05
(0)
Urathane Sway bar Links
-
Dan Lafley
16:06:23 01/25/05
(1)
Just tighten them enough
-
Velocewest
17:18:34 01/25/05
(0)
clutch pedal pressure
-
Allert
13:51:19 01/25/05
(9)
Rule of thumb
-
Mike W.
18:30:29 01/26/05
(0)
Re: clutch pedal pressure
-
Allert
00:24:05 01/26/05
(0)
Be aware that leaking master can drip on the >>
-
Craig in Davis
14:10:58 01/25/05
(2)
Re: Be aware that leaking master can drip on the >>
-
Allert
08:40:35 01/26/05
(1)
Sorry, can't help you with that one nt
-
Craig in Davis
07:19:58 01/27/05
(0)
Re: clutch pedal pressure
-
ChuckNC
14:09:46 01/25/05
(0)
Re: clutch pedal pressure
-
Mike
14:05:09 01/25/05
(1)
Oh yeah...
-
Mike
14:07:05 01/25/05
(0)
Check the fluid?
-
dmckim
14:03:35 01/25/05
(0)
Rare NLA sport parcel tray FS on ebay
-
Trubey
10:37:51 01/25/05
(0)
Help with right side running lights
-
Robert Knowlton
08:05:08 01/25/05
(0)
assorted cars
-
ChuckNC
07:40:45 01/25/05
(1)
Chuck,check your e-mail...
-
Jeff Olson
19:15:37 01/25/05
(0)
E12 on Good Morning America
-
papajimmm nh 81 528i
06:20:35 01/25/05
(2)
hmm, where is Peter? He said mexico, but.......
-
Dave_in_VA
06:39:07 01/25/05
(0)
Re: E12 on Good Morning America
-
Scott
06:36:46 01/25/05
(0)
Anyone need an Owner's handbook?
-
Kevin McD
05:46:05 01/25/05
(0)
rear breaks
-
Eduardo Alvarez
04:39:42 01/25/05
(8)
Re: rear breaks
-
Big Dog
11:06:03 01/25/05
(0)
Re: rear breaks
-
Velocewest
10:01:48 01/25/05
(6)
Any potential issues with the 6er vented rotors?
-
Bob/E12/6er
10:20:21 01/25/05
(5)
For vented discs you would need the
-
Velocewest
11:18:09 01/25/05
(4)
Pretty sure all 6er rears were vented >>
-
Bob/E12/6er
15:33:50 01/25/05
(3)
Not too many 6's older than my '77
-
Velocewest
18:52:47 01/25/05
(2)
I have vented rotors on the Gray Bomber
-
James Hineline
19:32:02 01/25/05
(1)
Nope - Not all 6-series !
-
Niklas Edlund - Motronic E12
05:41:17 01/26/05
(0)
A few suspension questions..
-
Dan J
21:23:55 01/24/05
(5)
great comments by Mike and Tony, Newbie FAQ??
-
Adam Wilson in Chicago
08:10:44 01/25/05
(1)
where can you get alpina springs new???
-
ckn melb
14:25:46 01/26/05
(0)
Re: A few suspension questions..
-
Velocewest
22:45:59 01/24/05
(2)
Start with...
-
Mike E
23:25:06 01/24/05
(1)
I agree with Mike E VW....
-
Scott
04:32:50 01/25/05
(0)
Whats this? A 70$ Supercharger?!
-
Dan J
20:43:20 01/24/05
(7)
Re: Whats this? A 70$ Supercharger?!
-
Kaveman
22:21:16 01/24/05
(4)
Great Ski Resort Property 4 Sale in Kansas
-
Misha
11:08:08 01/25/05
(0)
Thanks...
-
Dan J
22:37:01 01/24/05
(2)
Good choice Dan...
-
Scott ATL
04:35:58 01/25/05
(0)
Typo!
-
Dan J
22:42:52 01/24/05
(0)
A mighty wind...
-
Velocewest
22:11:31 01/24/05
(0)
Displacement
-
Mike E
21:28:04 01/24/05
(0)
Motronic in an E12
-
John in Simi Valley
20:04:26 01/24/05
(6)
Sounds Easier to just grab a 533i
-
John in Simi Valley
13:09:38 01/25/05
(0)
brake booster clearance
-
Velocewest
09:48:34 01/25/05
(0)
Re: Motronic in an E12
-
Velocewest
22:25:15 01/24/05
(0)
Long
-
Mike W.
22:22:05 01/24/05
(1)
Any M30 Motronic bell with the sensor bosses
-
Velocewest
22:30:01 01/24/05
(0)
Bellhousing
-
Chris in Laguna Beach
22:19:49 01/24/05
(0)
Hood Pad
-
Devin Calder
16:46:37 01/24/05
(7)
Real ques is how to get the old one off?
-
Walt Barie
05:18:22 01/26/05
(2)
3m Adhesive remover (nt)
-
Velocewest
19:53:57 01/26/05
(1)
Re: 3m Adhesive remover (nt)
-
Walt Barie
05:04:34 01/27/05
(0)
Re: Hood Pad
-
Jim
18:11:30 01/24/05
(1)
I used this pad...
-
Lenny D.
21:43:47 01/24/05
(0)
Re: Hood Pad
-
Scott ATL
16:52:25 01/24/05
(1)
Re: Hood Pad
-
Devin Calder
17:10:52 01/24/05
(0)
Accurate TDC info needed for Valve Adjustment`
-
Jaime Obando
15:08:42 01/24/05
(2)
I don't worry about TDC for valve adjustment>>>
-
Craig in Davis
18:44:25 01/24/05
(1)
overlap
-
greghill-phx,az
19:26:48 01/24/05
(0)
Mean 530 update part two...
-
Scott ATL
14:02:50 01/24/05
(2)
Re: Mean 530 update part two...
-
jim@dashop
14:28:26 01/24/05
(1)
Thanks Jim, a few more questions...
-
Scott ATL
16:48:48 01/24/05
(0)
paging ckn re the parts car
-
Michael R from Melbourne
02:37:36 01/24/05
(0)
I tell you what, BMWs never die
-
Edward Beech
22:50:01 01/23/05
(14)
I think I need to move to Australia...
-
Nate in Utah
14:42:55 01/25/05
(0)
This sound very much like my car :)
-
Hans V.
08:31:57 01/24/05
(0)
You're obsessed
-
Remy Davison
04:05:02 01/24/05
(1)
The M535 went to a good home
-
Mike E
04:13:28 01/24/05
(0)
You crack me up Edward
-
Michael R from Melbourne
02:34:47 01/24/05
(9)
Re: You crack me up Edward
-
Edwrad Beech
03:13:55 01/24/05
(8)
VX SS LS1 (ot)
-
Michael R from Melbourne
17:32:40 01/24/05
(0)
If you're looking for an unbreakable 520
-
Mike E
04:07:28 01/24/05
(0)
BTW Edward, are you in Hobart?
-
Remy Davison
04:07:01 01/24/05
(5)
Re: BTW Edward, are you in Hobart?
-
Edward Beech
14:21:48 01/24/05
(1)
Re: BTW Edward, are you in Hobart?
-
James (Hobart)
17:43:23 01/24/05
(0)
518?
-
Mark
06:07:07 01/24/05
(2)
Re: 518?
-
Edward Beech
14:19:29 01/24/05
(1)
Re: 518?
-
Mark
16:11:17 01/24/05
(0)
530i vs. 528i interior door panels
-
Robert Bondi
19:34:09 01/23/05
(0)
Yes, there is an e12 in there somewhere...
-
Bill Hynes
12:49:05 01/23/05
(2)
We got about as much here
-
Dan J
22:46:19 01/24/05
(0)
The snow has even rated a mention
-
Michael R from Melbourne
15:35:40 01/23/05
(0)
E12 Wiring diagram, rear window heat not working.
-
Hans V.
11:52:41 01/23/05
(4)
Re: E12 Wiring diagram, rear window heat not worki
-
Mike W.
12:05:33 01/23/05
(3)
Re: E12 Wiring diagram, rear window heat not worki
-
Hans V.
12:23:24 01/23/05
(2)
Hans, I have it
-
Velocewest
09:46:51 01/24/05
(1)
Re: Hans, I have it
-
Hans V.
11:37:12 01/24/05
(0)
Mean 530 update....
-
Scott ATL
10:54:47 01/23/05
(3)
1 hr 15 min?
-
Robert Bondi
11:05:54 01/23/05
(2)
HAH!LOL!...
-
Scott ATL
11:24:34 01/23/05
(1)
should qualify
-
Robert Bondi
15:17:17 01/23/05
(0)
Shameless Plug: Momo Alpina Wood Steering Wheel o
-
Chris
08:56:33 01/23/05
(1)
Man...
-
Scott ATL
11:32:00 01/23/05
(0)
just venting
-
greghill-phx,az
19:03:05 01/22/05
(1)
Sorry to hear it man...
-
Scott ATL
20:02:18 01/22/05
(0)
What is that &%$&! noise!? update
-
Velocewest
14:13:13 01/22/05
(11)
OK, guess again
-
Velocewest
18:33:37 01/22/05
(4)
wow, what a great catch
-
Adam Wilson in Chicago
21:31:30 01/22/05
(0)
A right of passage for me.... more...
-
Preston in Spokane
21:00:45 01/22/05
(1)
Way to go Preston! eom
-
Craig in Davis
07:29:01 01/23/05
(0)
Conflabit!
-
Scott ATL
18:35:34 01/22/05
(0)
YES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
Scott ATL
14:47:45 01/22/05
(0)
Re: What is that &%$&! noise!? update
-
Guess who.
14:17:56 01/22/05
(4)
It looks like new inside
-
Velocewest
18:41:48 01/22/05
(3)
Re: It looks like new inside
-
Big Dig
18:55:43 01/22/05
(2)
Huh?
-
Velocewest
18:05:06 01/23/05
(1)
Ah, this was a reponse to Matt below
-
Velocewest
18:08:04 01/23/05
(0)
Motronic 3.3/3.5 intake manifold bolt up ?
-
Matt Evans
12:46:24 01/22/05
(2)
Re: Motronic 3.3/3.5 intake manifold bolt up ?
-
Troy Rudolph
12:51:09 01/23/05
(0)
Re: Motronic 3.3/3.5 intake manifold bolt up ?
-
Mike W.
18:43:29 01/22/05
(0)
Parting-out 80 528i
-
Victor
10:09:30 01/22/05
(4)
Where are you, Victor ?? nt
-
Jeff (Atlanta)
15:30:07 01/22/05
(1)
Re: Where are you, Victor ?? nt
-
Victor
19:43:37 01/22/05
(0)
what color interior?
-
Daniel H
15:29:48 01/22/05
(1)
Re: what color interior?
-
Victor
19:44:34 01/22/05
(0)
Scott in Melb - YGM (m)
-
Gerry ACT/Oz
22:19:01 01/21/05
(1)
Re: Scott in Melb - YGM (m)
-
Scott in Melb
16:45:35 01/22/05
(0)
Need an S38 Spark Plug Socket? (m)
-
Brian da Parts Pimp
18:56:56 01/21/05
(0)
anyone got webers?
-
Garret
18:01:56 01/21/05
(12)
Forget the webers, use a good 'ole 'Murican.....
-
Bill Bowes
16:45:27 01/22/05
(1)
Bill you make is sound like tuning triple webers
-
Frank H
09:14:06 01/23/05
(0)
Anyone remember how to tune webers?
-
Bill Bowes
16:16:53 01/22/05
(2)
I do!
-
Frank H
16:35:24 01/22/05
(1)
You tell 'em Frank!
-
Scott
18:41:15 01/22/05
(0)
Re: anyone got webers?
-
Frank H
19:17:29 01/21/05
(2)
im interested frank
-
Garret
20:35:44 01/21/05
(1)
Re: im interested frank
-
Velocewest
22:12:07 01/21/05
(0)
Check Pierce Manifolds
-
Velocewest
18:49:46 01/21/05
(0)
Weeeeeell.....
-
Scott
18:16:06 01/21/05
(2)
3.0 liter?
-
Garret
20:38:26 01/21/05
(1)
78....
-
Scott ATL
20:59:16 01/21/05
(0)
Going on vacation next week (more)
-
Peter Florance - First Fives Dictator for Life
13:41:10 01/21/05
(5)
Go for the F/F 10 % discount Ha Ha N/T
-
Jim
17:25:49 01/21/05
(0)
since I just returned from Cozumel three weeks ago
-
Adam Wilson in Chicago
14:59:41 01/21/05
(0)
Been there. Real nice place. Have Fun (nt)
-
Mishast
14:53:11 01/21/05
(0)
Enjoy!
-
Velocewest
13:56:26 01/21/05
(0)
Re: Going on vacation next week (more)
-
Andrew
13:51:12 01/21/05
(0)
1977 530i Parting
-
Jamie Seattle
10:18:08 01/21/05
(9)
Re: 1977 530i Parting
-
Dan J
11:35:13 01/22/05
(1)
Re: 1977 530i Parting
-
Jamie Seattle
19:03:10 01/23/05
(0)
Re: 1977 530i Parting
-
Stephen
19:28:50 01/21/05
(1)
Re: 1977 530i Parting
-
Jamie Seattle
19:02:25 01/23/05
(0)
Re: 1977 530i Parting
-
jeffrey hoofard
12:23:27 01/21/05
(1)
Re: 1977 530i Parting
-
Jamie Seattle
15:23:16 01/21/05
(0)
Re: 1977 530i Parting
-
Velocewest
10:35:16 01/21/05
(2)
Re: 1977 530i Parting
-
Jamie Seattle
15:25:15 01/21/05
(1)
YGM Jamie
-
Velocewest
15:54:55 01/21/05
(0)
Previous post of yours - Engine build advice
-
Mango
06:54:19 01/21/05
(3)
Hi Mango, engine rebuild info
-
Adam Wilson in Chicago
12:13:30 01/21/05
(1)
only one comment - injectors
-
Peter Florance
13:32:45 01/21/05
(0)
Re: Previous post of yours - for Adam Wilson
-
Mango
06:56:09 01/21/05
(0)
getting a 528i and need help
-
Garret
06:10:39 01/21/05
(10)
Hey! Nice to see a peer on here
-
Dan J
11:51:10 01/22/05
(0)
LOT of WORK?
-
John in Simi Valley
11:12:46 01/22/05
(2)
John, Are you italian?
-
Scott ATL
20:46:22 01/22/05
(1)
Nope, Not Italian
-
John in Simi Valley
22:05:50 01/24/05
(0)
Welcome!
-
Brian in Oxnard
08:06:57 01/21/05
(5)
Never mind... I'm mistaken
-
Bruce in Seattle
14:04:35 01/21/05
(2)
January '05 COTM has tubines (nt)
-
Velocewest
14:17:16 01/21/05
(1)
Tu R bines...
-
Velocewest
14:18:56 01/21/05
(0)
March '04 Car of the Month shows turbine wheels...
-
Bruce in Seattle
14:00:33 01/21/05
(1)
Nope, those aren't turbines...
-
Brian in Oxnard
14:04:28 01/21/05
(0)
BMW e12 factory sport spring options. part #'s?
-
cfisher
18:23:04 01/20/05
(6)
Re: BMW e12 factory sport spring options. part #'s?
-
Velocewest
10:57:38 01/21/05
(0)
On line parts catalogue
-
Michael R from Melbourne
19:25:05 01/20/05
(4)
Re: On line parts catalogue
-
Mark
04:13:23 01/21/05
(3)
Would you happen to know which ones would be ...
-
cfisher
07:01:16 01/21/05
(2)
Re: Would you happen to know which ones would be ...
-
Mark
17:30:06 01/23/05
(1)
Thanks! I appreciate it.
-
cfisher
11:14:27 01/24/05
(0)
'80 528iA in Melbourne being stripped, parts >>
-
ckn melb
15:30:18 01/20/05
(10)
Put me down for fan/fanclutch if you can, Chris
-
Remy Davison
04:40:53 01/21/05
(1)
Or I can come in Monday and/or pay $$
-
Remy Davison
06:42:37 01/21/05
(0)
Sounds like a first fives meet is needed?
-
Michael R from Melbourne
19:23:06 01/20/05
(7)
Re: Sounds like a first fives meet is needed?
-
Aaron from Oz
20:06:55 01/20/05
(6)
Plan B
-
Michael R from Melbourne
22:50:08 01/20/05
(1)
Re: Plan B
-
ckn
14:52:57 01/21/05
(0)
Car at Garage, only business hours access.
-
ckn
20:19:28 01/20/05
(3)
Re: Car at Garage, only business hours access.
-
Aaron from Oz
18:53:53 01/21/05
(2)
Re: thermostat housing etc
-
ckn
18:57:41 01/21/05
(1)
Re: thermostat housing etc
-
Aaron from Oz
00:34:43 01/22/05
(0)
Paging ckn re your parts car
-
Michael R from Melbourne
15:29:55 01/20/05
(0)
Paging Edward Beech ! Re: Pinging & AFM
-
Andres Moreno
15:27:43 01/20/05
(1)
Re: Paging Edward Beech ! Re: Pinging & AFM
-
Edward Beech
23:43:03 01/21/05
(0)
How Many e-21 Owners In Houston - Texas ??
-
Neck Smith
15:13:53 01/20/05
(2)
Re: How Many e-12 Owners In Houston - Texas ??
-
Robert Bondi
00:24:05 01/21/05
(0)
You meant "E-12" !!
-
Jaime Obando
15:19:26 01/20/05
(0)
fs 1978 530i(mod 3.3 w/ 265 trans)
-
jeff_PDX
12:30:46 01/20/05
(2)
I'm interested...
-
Nate in Utah
15:54:47 01/20/05
(0)
Jeff, is it L-jet or Motronic? (nt)
-
Velocewest
13:39:59 01/20/05
(0)
Bosch Blue
-
Dan Lafley
11:52:27 01/20/05
(1)
2 Blues, I believe
-
Velocewest
13:29:46 01/20/05
(0)
77 bmw 630
-
fidosd9
09:53:06 01/20/05
(7)
Just pick up a used engine
-
Velocewest
10:01:53 01/20/05
(6)
It cost me about $600 to rebuild mine....
-
Dan Lafley
11:00:21 01/20/05
(5)
$600 to rebuild it?You did it yourself?Parts&Labor
-
Jaime Obando
14:38:51 01/20/05
(4)
I've done a few
-
Mike W.
21:37:57 01/20/05
(3)
Re: I've done a few
-
fidosd9
08:28:33 01/21/05
(2)
If you are going to take on the job,
-
Velocewest
09:42:14 01/21/05
(1)
Re: If you are going to take on the job,
-
fidosd9
18:59:38 01/21/05
(0)
Anybody need a 528i owner's manual?
-
Bob/E12/6er
08:16:39 01/20/05
(0)
E12 track car set up specs
-
Big Dog
07:35:06 01/20/05
(11)
Re: E12 track car set up specs
-
Big Dog
09:30:31 01/20/05
(8)
let's make 2005
-
Peter Florance
17:48:51 01/20/05
(7)
I'm working on it ;)
-
Matt Evans
20:44:22 01/20/05
(6)
Re: I'm working on it ;)
-
Big Dog
08:44:18 01/21/05
(5)
any E28 M30 pan ? and where ...
-
Matt Evans
10:04:37 01/21/05
(4)
Re: any E28 M30 pan ? and where ...
-
Big Dog
11:17:53 01/21/05
(3)
Disconnect oil level sender ?
-
Matt Evans
11:58:00 01/21/05
(2)
Re: Disconnect oil level sender ?
-
Big Dog
12:12:56 01/21/05
(1)
sure i realize they do different things..
-
Matt Evans
12:36:15 01/21/05
(0)
thanks! (more)
-
Matt Evans
09:15:15 01/20/05
(0)
All this talk of an e12 track car is getting me >>
-
Craig in Davis
08:00:24 01/20/05
(0)
E28 Engine Wiring Conversion FAQ posted!
-
Peter Florance - First Fives Dictator for Life
04:46:14 01/20/05
(3)
On that subject
-
Velocewest
09:53:56 01/20/05
(0)
L.jetronic based....
-
Hans V.
06:09:14 01/20/05
(0)
Wunderbar. Thank you. nt
-
Jeff (Atlanta)
05:01:29 01/20/05
(0)
M30 2.8 high-comp piston set on ebay
-
Matt Evans
00:05:03 01/20/05
(1)
I Just bought them hehe ;)...
-
Aaron from Oz
02:26:54 01/25/05
(0)
So...Whos makin it to 5er Fest 2005? (m)
-
Brian da Parts Pimp
19:46:53 01/19/05
(10)
We will be there!
-
Greg J
08:20:12 01/21/05
(0)
Talk about a road trip!!!
-
Tom Masters
20:10:07 01/20/05
(0)
Maybe....
-
Michael R from Melbourne
19:31:07 01/20/05
(0)
Still too far away...
-
Nick in Co Springs
10:10:27 01/20/05
(0)
Hmmmm . . .
-
John in Simi Valley, Ca.
08:13:48 01/20/05
(0)
I will be there
-
Bill Hynes
07:04:12 01/20/05
(0)
me
-
Peter Florance
04:51:39 01/20/05
(0)
Me! (nt)
-
Eric Q
23:35:54 01/19/05
(0)
planning to go
-
Robert Bondi
21:57:50 01/19/05
(0)
I am! But I havent registered yet....
-
Scott ATL
19:51:37 01/19/05
(0)
s38 on flea-bay for you northerners
-
Mike E
19:33:14 01/19/05
(9)
I have one S38 in my E12
-
Zolka
01:22:36 01/22/05
(0)
Didn't mean to create a storm...
-
Mike E
19:25:58 01/20/05
(0)
Re: s38 on flea-bay for you northerners
-
Jeff C
11:09:24 01/20/05
(0)
Some folks are insane...
-
Mike
04:27:26 01/20/05
(5)
Re: Expensive Either Way
-
Will Ollison
04:56:55 01/20/05
(4)
Re: Expensive Either Way
-
Velocewest
09:46:52 01/20/05
(3)
Re: Cheap Thrills
-
Will Ollison
11:05:26 01/20/05
(2)
Re: Cheap Thrills
-
Velocewest
11:37:31 01/20/05
(1)
Re: Never heard the idle hands thing.
-
Will Ollison
12:13:48 01/20/05
(0)
WooHoo! Passed DEQ test today!
-
Velocewest
17:51:02 01/19/05
(0)
Anyone have a spare 80-81 L-Jet Plenum?
-
Chris
17:32:49 01/19/05
(0)
Let's play guess that noise...
-
Nate in Utah
13:09:24 01/19/05
(7)
It's your Rear Hub Bearing ! AMHIK
-
Jaime Obando
15:02:28 01/20/05
(1)
Jaime, now you have me wondering >>>
-
Craig in Davis
07:21:04 01/22/05
(0)
You guys are great
-
Nate in Utah
11:11:33 01/20/05
(0)
Re: Let's play guess that noise...
-
Walt Barie
05:36:46 01/20/05
(0)
Re: Let's play guess that noise...
-
Mango
03:33:24 01/20/05
(0)
Sounds like final drive (differential) to me too>>
-
Craig in Davis
14:18:34 01/19/05
(0)
Sounds like diff noise to me
-
Velocewest
13:19:52 01/19/05
(0)
E12 vs E28 - rear suspension
-
Matt Evans
12:43:15 01/19/05
(6)
I looked at it
-
Karl in KS
13:55:30 01/21/05
(0)
Re: E12 vs E28 - rear suspension
-
Troy Rudolph
18:57:08 01/19/05
(0)
My uneducated opinion
-
Eric Q
17:35:50 01/19/05
(0)
I believe they are referring to the e28>>
-
Craig in Davis
14:24:47 01/19/05
(0)
goofy at speed?
-
Peter Florance
12:53:25 01/19/05
(1)
Ive seen 130, no problems at all...
-
Scott ATL
16:24:47 01/19/05
(0)
Electrical sunroof
-
GSS
11:04:49 01/19/05
(4)
Re: Electrical sunroof
-
Jeff C
19:48:17 01/19/05
(3)
Re: Electrical sunroof
-
Michael R from Melbourne
22:23:31 01/19/05
(2)
Roof swap
-
Hans V.
23:22:26 01/19/05
(0)
I'm afraid you're right
-
Mike W.
22:37:23 01/19/05
(0)
VeloceWest did you fix the &^$% noise >>
-
Craig in Davis
08:51:17 01/19/05
(7)
It's being inconsistent...
-
Velocewest
09:02:18 01/19/05
(6)
long shot... Alternator Bearing???
-
Preston in Spokane
11:03:43 01/19/05
(0)
Gotta pipe in here...
-
Guess who?
10:05:46 01/19/05
(3)
You guys are evil... ;-P (nt)
-
Velocewest
12:04:44 01/19/05
(2)
Geez Tony... did I forget?????
-
Lars Olbimmerguy
15:31:30 01/19/05
(1)
Compared to the SSR, this is Disneyland... (nt)
-
Velocewest
18:22:33 01/19/05
(0)
has anyone seen my car keys?
-
Peter Florance
09:49:50 01/19/05
(0)
The Hunt Continues....
-
Dan Lafley
08:12:57 01/19/05
(8)
There is a Mallory that will work
-
Velocewest
09:43:31 01/20/05
(0)
Dear Mr. Lafley,
-
John in Simi Valley
12:39:51 01/19/05
(3)
igntion ballast
-
Peter Florance
12:54:51 01/19/05
(0)
Wait a minute . . .
-
John in Simi, Again
12:43:39 01/19/05
(1)
No, its for my 530...
-
Dan Lafley
13:31:53 01/19/05
(0)
Re: The Hunt Continues....
-
Kaveman
11:58:43 01/19/05
(0)
This sounds like the perfect time...
-
Matt Evans
08:37:28 01/19/05
(0)
This is why so many people have parts cars.
-
Lars Olbimmerguy
08:20:28 01/19/05
(0)
Better Chassis, E12 or E28??
-
John in Simi Valley
23:25:35 01/18/05
(18)
E28 suspension is...boring
-
Remy Davison
04:02:48 01/20/05
(0)
E12
-
Mike W.
18:37:33 01/19/05
(0)
I'd say the E12, but primarily because of the>>
-
Justin in C'ville
07:42:01 01/19/05
(0)
Re: Better Chassis, E12 or E28??
-
Eddie in TO
05:55:06 01/19/05
(1)
E12 Alpina B7S Turbo, 330hp and 369 lb/ft of TQ
-
Adam Wilson in Chicago
07:08:43 01/19/05
(0)
Re: Better Chassis, E12 or E28??
-
Peter Florance
04:20:27 01/19/05
(5)
Does later model imply 77 or later?
-
Misha
10:36:30 01/19/05
(2)
anyone have diff mount failure on 79 or older?
-
Peter Florance
11:02:09 01/19/05
(1)
81 diff mount failure
-
greghill-phx,az
13:34:22 01/20/05
(0)
And Frank has two e12 based B7's (5 and 6), so
-
Velocewest
08:49:57 01/19/05
(0)
sorry link should be" Frank's B7 Specs
-
Peter Florance
04:21:04 01/19/05
(0)
Rear diff mount..
-
Matt Evans
00:25:43 01/19/05
(6)
Re: Rear diff mount..
-
Mike
04:24:56 01/19/05
(5)
Downright Scary with an Unprepared Chassis
-
John in Simi valley
05:21:53 01/19/05
(4)
true of both chassis
-
Peter Florance
06:40:09 01/19/05
(3)
I think Paul's car is about 265hp but your point
-
Velocewest
08:54:58 01/19/05
(1)
OK This was supposed be below Adam's post
-
Velocewest
08:57:37 01/19/05
(0)
Re: true of both chassis
-
Adam Wilson in Chicago
07:06:50 01/19/05
(0)
Brake boosters from '80 528i same as '75 528?
-
ckn melb
20:43:21 01/18/05
(4)
Although... I misread you model
-
Mike E
21:22:28 01/18/05
(2)
The boosters have been rebuilt not so long ago
-
ckn melb
22:07:16 01/18/05
(1)
Cool. Be sure to get...
-
Mike E
22:18:27 01/18/05
(0)
No - later ones are bigger
-
Mike E
21:20:39 01/18/05
(0)
Difficult to start
-
Bill Hynes
19:57:32 01/18/05
(2)
pictures
-
ChuckNC
08:30:11 01/19/05
(0)
Sounds like the switch more
-
Craig in Davis
22:03:02 01/18/05
(0)
E12 Track Car - Matt
-
Peter Florance
18:10:05 01/18/05
(5)
Re: E12 Track Car - Matt
-
Big Dog
18:52:25 01/18/05
(2)
that'd be great..
-
Matt Evans
15:24:40 01/19/05
(1)
Re: that'd be great..
-
Peter Florance
16:51:26 01/19/05
(0)
Re: E12 Track Car - Matt
-
Eric Q
18:19:28 01/18/05
(1)
Re: E12 Track Car - Matt
-
Peter Florance
19:53:42 01/18/05
(0)
passenger door hard to shut
-
Devin Calder
17:39:41 01/18/05
(3)
Re: passenger door hard to shut
-
Peter Florance
04:26:28 01/19/05
(1)
Bavauto has replacements for less than a $...
-
Tulsa Dave
05:27:48 01/19/05
(0)
Re: passenger door hard to shut
-
Michael R from Melbourne
20:00:46 01/18/05
(0)
79 528i in bay area for a 100 bucks!
-
Noel in LA
13:09:38 01/18/05
(0)
e12 for sale in aus cheap.
-
Aaron
05:17:50 01/18/05
(4)
Been advertised for awhile too
-
Michael R from Melbourne
20:05:20 01/18/05
(0)
Hey Aaron, what the scoop on the Supercharger?
-
Scott ATL
08:14:59 01/18/05
(2)
Re: Hey Aaron, what the scoop on the Supercharger?
-
Aaron
01:51:32 01/19/05
(1)
Are you driving again soon?
-
Mike E
02:00:39 01/19/05
(0)
E12 at NW pick-apart in Houston-complete..
-
texastim
04:20:40 01/18/05
(7)
Re: E12 at NW pick-apart in Houston-complete..
-
Ernie Babin
07:47:50 01/18/05
(4)
Re: E12 at NW pick-apart in Houston-complete..
-
texastim
17:12:37 01/18/05
(3)
Re: E12 at NW pick-apart in Houston-complete..
-
Ernie Babin
19:39:13 01/18/05
(2)
Feeder road of I-45 heading South just South...
-
texastim
10:56:18 01/19/05
(1)
Re: Feeder road of I-45 heading South just South...
-
Ernie Babin
18:32:29 01/19/05
(0)
Does it have a 5speed? nt
-
Mike
05:38:58 01/18/05
(1)
Sorry - Auto
-
texastim
17:11:29 01/18/05
(0)
Anyone in Oz got a spare fan clutch?
-
Remy Davison
03:52:58 01/18/05
(2)
'80 528iA complete for parts, if you want the fan
-
ckn melb
14:22:15 01/20/05
(0)
Re: Anyone in Oz got a spare fan clutch?
-
Scott in Melb
04:16:55 01/18/05
(0)
E12 Based 6 Series
-
John in Simi Valley
00:36:54 01/18/05
(8)
I'd be wary...
-
Mike W.
19:21:46 01/18/05
(0)
I'd get the '77
-
Adam Wilson in Chicago
09:43:01 01/18/05
(2)
Agreed: It will be exempt sooner (NT)
-
Misha
13:46:55 01/18/05
(1)
EXEMPT?? -- I wish, but it doesn't look like it.
-
John in Simi Valley
23:05:40 01/18/05
(0)
My opinion, and you know what they say...
-
Scott ATL
06:07:35 01/18/05
(0)
Oh yea, . . . Smog
-
John in Simi Valley
00:50:03 01/18/05
(2)
How do you want to do this?
-
Eric Q
18:28:43 01/18/05
(0)
John...
-
Mike
04:20:40 01/18/05
(0)
533 Distibutor
-
Dan Lafley
21:39:30 01/17/05
(1)
Re: 533 Distibutor
-
Remy Davison
03:49:55 01/18/05
(0)
Is a 3/8'' line big enough?
-
Devin Calder
17:50:47 01/17/05
(4)
Re: Is a 3/8'' line big enough?
-
The Rev.
19:19:27 01/17/05
(3)
Re: Is a 3/8'' line big enough?
-
The Rev.
04:18:53 01/18/05
(2)
yeah so like 7/16"
-
Peter Florance
04:29:45 01/18/05
(1)
5/16" is the best approximation for the 8mm >>>
-
Craig in Davis
22:18:35 01/18/05
(0)
paging Michael R in Melbourne - Re: parts car
-
ckn melb
14:31:53 01/17/05
(0)
Releaf1 !! Check your email....
-
Scott ATL
12:27:17 01/17/05
(0)
Stainless steel braided brake hoses
-
Big Dog
09:39:53 01/17/05
(6)
I run them on mine Korman is the cheapest
-
Sam
17:36:09 01/17/05
(0)
Re: Stainless steel braided brake hoses
-
Big Dog
11:39:44 01/17/05
(0)
Re: Stainless steel braided brake hoses
-
Bruce in Seattle
11:05:51 01/17/05
(1)
same here
-
Peter Florance
11:40:26 01/17/05
(0)
Try Bav Auto Sport
-
Misha
10:28:34 01/17/05
(0)
had them on my old 528i, now owned by Tulsa D.
-
Adam Wilson in Chicago
09:41:34 01/17/05
(0)
E12 accross Aurora from N. Seattle Home Depot
-
Bruce in Seattle
09:14:10 01/17/05
(0)
What is that &%$&! noise!?
-
Velocewest
08:00:14 01/17/05
(7)
Re: What is that &%$&! noise!?
-
Frank H
19:32:47 01/18/05
(0)
Not to sound repetitive(sp?)....
-
Scott ATL
12:34:23 01/17/05
(2)
I thought about the timing chain too but>>>
-
Craig in Davis
12:54:22 01/17/05
(1)
My timing chain tensioner was broken
-
Michael R from Melbourne
21:19:34 01/17/05
(0)
Does car have A/C, did you listen to the >>
-
Craig in Davis
08:20:57 01/17/05
(1)
Nope, no A/C, but
-
Velocewest
08:36:41 01/17/05
(0)
Re: What is that &%$&! noise!?
-
Big Dog
08:14:07 01/17/05
(0)
Battery Issues.....
-
NC Doug
07:17:53 01/17/05
(1)
Things to check....more
-
Craig in Davis
08:14:07 01/17/05
(0)
It's the little things
-
Velocewest
19:57:20 01/16/05
(3)
couple of questions....
-
Scott ATL
21:53:20 01/16/05
(2)
Re: couple of questions....
-
Velocewest
07:30:22 01/17/05
(0)
Re: couple of questions....
-
Mark
03:49:05 01/17/05
(0)
Blown 1:3.63 diff, better replacement?
-
ckn melb
19:34:53 01/16/05
(2)
Michael R's parts car will have a good diff.
-
Mike E
00:38:43 01/17/05
(0)
Re: Blown 1:3.63 diff, better replacement?
-
Edward Beech
21:23:17 01/16/05
(0)
For those having oil filter frustrations..
-
Matt Evans
12:03:14 01/16/05
(1)
Good Info
-
John in Simi Valley
12:41:21 01/18/05
(0)
fuel line frustrations
-
Devin Calder
09:54:30 01/16/05
(4)
Re: fuel line frustrations
-
Ron
19:01:15 01/20/05
(0)
Re: fuel line frustrations
-
D.
01:20:35 01/19/05
(0)
Worth checking for all
-
Velocewest
07:36:02 01/17/05
(0)
Re: fuel line frustrations
-
ChuckNC
06:25:12 01/17/05
(0)
Dash turn signal idicator problems>>>
-
Craig in Davis
09:13:31 01/16/05
(2)
This is usually a grounding issue
-
Velocewest
12:24:23 01/16/05
(1)
Thanks, cleaned the sockets and its fixed eom
-
Craig in Davis
16:17:29 01/16/05
(0)
My Pickup truck really needs a good home. You?
-
Brett Anderson - KMS
19:09:39 01/15/05
(1)
What does the ...
-
Mike
19:42:07 01/15/05
(0)
No turn signals/indicators/blinkers!
-
Edward Beech
18:03:47 01/15/05
(3)
Found out what it was!
-
Edward Beech
18:35:49 01/15/05
(2)
I was going to say Hazard switch too!
-
Scott ATL
08:26:34 01/16/05
(0)
Imparts in Hobart - and kludge fix
-
Remy Davison
04:17:30 01/16/05
(0)
Looking for Ignition Parts.....
-
Dan Lafley
17:10:24 01/15/05
(1)
I have the ECU, distributor and coil too I believe
-
BavarianRescue
08:02:41 01/16/05
(0)
heater blower motor...intermitant on and off???
-
eric in denver
16:13:30 01/15/05
(1)
Had the same Problem
-
Dan Lafley
17:06:49 01/15/05
(0)
F.S. (shameless plug)
-
RonP
14:07:23 01/15/05
(0)
Rear Spindle and Hub
-
Releaf1
13:03:47 01/15/05
(1)
Re: Rear Spindle and Hub
-
Scott ATL
08:48:33 01/16/05
(0)
wire harness needed
-
doug in ky 79 turbo
11:21:43 01/15/05
(1)
I have the ECU, but not the harness..........
-
BavarianRescue
08:05:16 01/16/05
(0)
Gearbox thoughts
-
Matt Evans
10:27:34 01/15/05
(3)
Re: Gearbox thoughts
-
Blair
22:28:35 01/15/05
(1)
You can try yourself (if you have excel)
-
Matt Evans
08:15:42 01/16/05
(0)
Re: Gearbox thoughts
-
Troy Rudolph
20:16:21 01/15/05
(0)
Damaged '81 528i Atlanta, GA
-
Cori
08:26:23 01/15/05
(5)
Are the frame rails straight??
-
Scott ATL
18:13:18 01/15/05
(3)
Not Exactly
-
Cori
15:19:00 01/17/05
(2)
Where are you located?? nt
-
Scott
15:50:44 01/17/05
(1)
Between Conyers and Loganville
-
Cori
07:00:28 01/18/05
(0)
I've got two sets of fenders & more,
-
stewart in slc
17:45:55 01/15/05
(0)
Ignition.. (long)
-
Mike
21:07:54 01/14/05
(5)
TY folks...
-
Mike
08:50:14 01/15/05
(0)
Re: Ignition.. (long)
-
Troy Rudolph
21:23:05 01/14/05
(1)
Is that all you would need...
-
Dan Lafley
22:34:55 01/14/05
(0)
Re: Ignition.. (long)
-
Chowchilla
21:21:25 01/14/05
(1)
Re: Ignition.. (long)
-
Scott ATL
21:32:27 01/14/05
(0)
the hiccups
-
Sebastian
15:25:03 01/14/05
(5)
Re: the hiccups
-
Sebastian
04:39:22 01/18/05
(0)
Re: the hiccups
-
Peter Florance
15:29:23 01/14/05
(3)
check afm tracking arm
-
marc79euro645
21:05:55 01/14/05
(2)
Agree: Contact on Potentometer is likely failing
-
Misha
14:41:08 01/16/05
(1)
Mine did the same thing.
-
Michael R from Melbourne '80 528iA
17:55:10 01/16/05
(0)
Am I crazy?
-
Velocewest
11:23:43 01/14/05
(8)
Re: Am I crazy?
-
Stephen
07:07:49 01/21/05
(0)
Hope you are still happy with her....
-
Guess who?
14:46:00 01/14/05
(1)
Absolutely...
-
Velocewest
15:52:39 01/14/05
(0)
this is what you are looking for
-
Peter Floracne
12:26:03 01/14/05
(1)
Re: this is what you are looking for
-
Velocewest
14:29:01 01/14/05
(0)
small cable from center
-
Medly
11:49:51 01/14/05
(0)
Theres cable
-
Dan Lafley
11:48:20 01/14/05
(0)
Re: Am I crazy?
-
Allan A.
11:48:09 01/14/05
(0)
750i Brakes does NOT fit on a E12
-
Niklas Edlund - Motronic E12
02:51:25 01/14/05
(