Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XLIII

(2005/03/14 - 2005/01/30)

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• Relay identification - Damien in Sydney 19:59:49 03/14/05 (0)
• little black box on dash - Michael Preddy 19:10:34 03/14/05 (1)
  • where? - Damien in Sydney 19:56:35 03/14/05 (0)
• FS: NIB Bilstein Sport rear shocks for e12 - Stan Hanks 17:25:27 03/14/05 (1)
  • I'll take 'em (you've got mail) - Blair (Seattle) 19:40:21 03/14/05 (0)
• who wouda thunk it... - Art in CA 15:53:21 03/14/05 (0)
• Ignition switch 1980 528 - Eric 15:28:10 03/14/05 (1)
  • Re: Ignition switch 1980 528 - ChuckNC 18:10:27 03/14/05 (0)
• Re: Needed Great Mechanic./Running rough - Rick 13:30:34 03/14/05 (0)
• PLEASE HELP ON ELECTRICAL WIRINGS - Tito 10:26:47 03/14/05 (1)
  • Re: PLEASE HELP ON ELECTRICAL WIRINGS - Tito 13:52:48 03/14/05 (0)
• Mad wrenching weekend - Velocewest 09:19:37 03/14/05 (6)
  • I could almost relate for a few moments there.... - Lars Olbimmerguy 12:20:50 03/14/05 (0)
  • Quick additional question... - Misha 10:34:27 03/14/05 (1)
    • Re: Quick additional question... - Velocewest 11:05:14 03/14/05 (0)
  • Re: Mad wrenching weekend - Jim 09:40:56 03/14/05 (2)
    • Re: Mad wrenching weekend - Velocewest 11:09:02 03/14/05 (1)
      • Re: Mad wrenching weekend - Jim 16:48:28 03/14/05 (0)
• Have anyone ever used the new style air flow valve - Steve 09:05:06 03/14/05 (0)
• F/S: Right-side Electric Mirror '78 530i/'79 528i - Troy Rudolph 08:44:30 03/14/05 (0)
• Aux air valve / cold start rough low idle - Dan 18:12:03 03/13/05 (1)
  • I'm no expert but mine opens all the way >> - Craig in Davis 19:26:08 03/13/05 (0)
• FUEL PUMP REPLACEMENT - ERic 17:19:32 03/13/05 (5)
  • Re: FUEL PUMP REPLACEMENT - Jeff (Atlanta) 18:56:19 03/13/05 (4)
    • Re: FUEL PUMP REPLACEMENT - Eric 15:20:55 03/14/05 (0)
    • check 745i - papajimm nh 81 528i 20:40:31 03/13/05 (2)
      • link didn't go - papajimm nh 81 528i 20:43:02 03/13/05 (1)
        • volvo 240 - Peter Florance 04:48:05 03/14/05 (0)
• 78 530i Turbo for sale in Chicago "545i" - Mike In Chicago 14:58:51 03/13/05 (2)
  • MM 3.7 Sport - Chris 13:38:03 03/14/05 (0)
  • Re: 78 530i Turbo for sale in Chicago "545i" - TCD 19:02:50 03/13/05 (0)
• Alternator Removal ?!?! - Troy Rudolph 14:10:32 03/13/05 (2)
  • Re: Alternator Removal ?!?! - Velocewest 11:12:14 03/14/05 (0)
  • Can you turn the bolt ? If so , , , - Jeff (Atlanta) 14:37:28 03/13/05 (0)
• Drivers side Elec. Mirror Needed for 78 m530i - Bernie Aguilar 13:21:22 03/13/05 (4)
  • Did you get my e-mail? - Mike W. 17:46:25 03/13/05 (1)
    • check ur inbox.. (nt) - Art in CA 15:46:47 03/14/05 (0)
  • chrome or black, door or window mount? nt - stewart in slc 14:33:56 03/13/05 (1)
    • Chrome window mount (nt) - Art in CA 15:47:29 03/14/05 (0)
• Fan nut - T.Han 12:46:48 03/13/05 (1)
  • Re: Fan nut - Jeff (Atlanta) 14:41:32 03/13/05 (0)
• 5er Fest 2005 Caravan UPDATE! Please look>>> - booker535 (e28 guy) 11:45:39 03/13/05 (0)
• motronic conversion??? - Art in CA 08:57:26 03/13/05 (1)
  • Re: motronic conversion??? - jim@dashop 12:07:12 03/13/05 (0)
• 1977 520i - Michael Preddy 06:43:16 03/13/05 (4)
  • 520i M10 injection systems - Mike E 13:30:25 03/14/05 (1)
    • Paging Michael Preddy - Michael R from Melbourne 14:35:38 03/14/05 (0)
  • Re: 1977 520i - Hans V. 11:13:53 03/13/05 (1)
    • Re: 1977 520i - Michael Preddy 19:05:35 03/14/05 (0)
• e12 M535i on ebay??? - John Kyle 06:19:23 03/13/05 (1)
  • Re: e12 M535i on ebay??? - Velocewest 12:04:19 03/14/05 (0)
• dash replacement - brian 01:19:08 03/13/05 (2)
  • Dealer ? No aftermarket for full dash. Boneyards? - Lars Olbimmerguy 07:57:22 03/13/05 (0)
  • junkyards.. - Art in CA 07:24:42 03/13/05 (0)
• e12 Buying Question... - Chris 21:09:57 03/12/05 (1)
  • Re: e12 Buying Question... - T.Han 21:26:42 03/12/05 (0)
• Head Gasket Replacement - Chris Itterly - Kalamazoo, Michigan 16:31:00 03/12/05 (4)
  • Are you sure that the cam cover at the back - Jeff (Atlanta) 14:44:13 03/13/05 (1)
    • Re: Are you sure that the cam cover at the back - Dan 17:00:13 03/13/05 (0)
  • Re: Head Gasket Replacement - paul 14:27:57 03/13/05 (0)
  • Re: Head Gasket Replacement - Carl 17:22:04 03/12/05 (0)
• megasquirt - Skunkman 15:24:35 03/12/05 (0)
• Firing order - skunkman 15:23:32 03/12/05 (6)
  • firing order on valve cover - Peter Florance 19:52:45 03/12/05 (5)
    • but where does it start? - skunkman 21:02:09 03/12/05 (4)
      • Spin engine to TDC on cylinder 1 - Velocewest 21:39:16 03/12/05 (3)
        • Then follow the wire from the front-most spark - Jeff (Atlanta) 08:52:22 03/13/05 (0)
        • pic of TDC - Peter Florance 04:45:09 03/13/05 (1)
          • My dist has a faint line scribed at #1> - Craig in Davis 07:35:22 03/13/05 (0)
• Electric Sunroof dead / sliding roof stuck - Dan 13:58:39 03/12/05 (2)
  • ck fuse - greghill-phx,az 12:17:10 03/13/05 (1)
    • Re: ck fuse - Dan 02:39:00 03/14/05 (0)
• Brain needs min volts to operate? - Anthony in San Rafael 09:28:23 03/12/05 (1)
  • Re: Brain needs min volts to operate? - Hans V. 11:40:43 03/12/05 (0)
• WTB '81 E12 - Kealaiki 06:32:18 03/12/05 (0)
• AIR FLOW METER - BRIAN 06:16:20 03/12/05 (0)
• First Fives T-Shirts - Part 3 (I'm lame...) - Eric Q 02:19:51 03/12/05 (4)
  • coooool...(nt) - Art in CA 07:41:12 03/13/05 (0)
  • Re: First Fives T-Shirts - Part 3 (I'm lame...) - Ronnie Knight 80528i 07:29:07 03/12/05 (0)
  • P.S. (read this!) - Eric Q 02:22:29 03/12/05 (1)
    • Hey Eric - Chris Hollis 05:02:32 03/12/05 (0)
• Front Strut & Spring Question: Sport vs HD - Misha 15:54:11 03/11/05 (7)
  • Re: Front Strut & Spring Question: Sport vs HD - David B 13:08:11 03/13/05 (0)
  • Re: Front Strut & Spring Question: Sport vs HD - Blair 17:50:21 03/11/05 (0)
  • Re: Front Strut & Spring Question: Sport vs HD - Velocewest 16:06:48 03/11/05 (2)
    • How short is really short - Misha 10:51:16 03/12/05 (1)
      • Re: How short is really short - Velocewest 21:41:22 03/12/05 (0)
  • Re: Front Strut & Spring Question: Sport vs HD - Jim Hilbrant 15:59:30 03/11/05 (1)
    • hey jim h........... - jim@dashop 17:43:04 03/11/05 (0)
• bellhousing questions - stewart in slc 11:35:33 03/11/05 (2)
  • Yes, but... - Mike W. 22:33:27 03/11/05 (0)
  • Yes, except - Velocewest 11:51:57 03/11/05 (0)
• Seats in a 78 530i -- Has anyone ever changed - Jeff (Atlanta) 11:11:22 03/11/05 (3)
  • Re: Seats in a 78 530i -- Has anyone ever changed - colinwhyte 01:45:56 03/12/05 (0)
  • Seat Belt Anchor... - Karl in KS 19:38:44 03/11/05 (1)
    • Re: Seat Belt Anchor... no problem - Michael R from Melbourne 02:01:04 03/12/05 (0)
• still looking for a coarse-spline m-tech - Art in CA 10:42:32 03/11/05 (0)
• paging Michael R - Art in CA 10:41:07 03/11/05 (2)
  • Michael R here - Michael R from Melbourne 02:03:42 03/12/05 (1)
    • Re: Michael R here - Art in CA 16:10:21 03/13/05 (0)
• E12 front strut replacement advice - Jim Hilbrant 08:59:51 03/11/05 (5)
  • Re: E12 front strut replacement advice - Edward Beech 15:08:00 03/11/05 (4)
    • Re: E12 front strut replacement advice - Jim Hilbrant 15:47:06 03/11/05 (3)
      • Re: E12 front strut replacement advice - Edward Beech 18:24:27 03/11/05 (2)
        • Re: Rear Differential Mount replacement - jim hilbrant 10:37:50 03/13/05 (0)
        • Re: differential mount advise! - Jim Hilbrant 10:10:13 03/12/05 (0)
• Interior Screw Set? - NC Doug 06:26:51 03/11/05 (2)
  • Re: Interior Screw Set? - Mike in Applegate 18:14:01 03/11/05 (0)
  • Re: Interior Screw Set? - Ryan Bryan 08:55:12 03/11/05 (0)
• my M535i for sale in USA - Greg W 23:28:09 03/10/05 (6)
  • Re: my M535i for sale in USA - Bob in San Jose 21:50:57 03/11/05 (1)
    • PM sent (nt) - Greg W 21:58:35 03/11/05 (0)
  • Got any cool spares your getting rid of as well? - Blair 14:01:46 03/11/05 (0)
  • Former Frank Haas car? (nt) - Velocewest 10:54:43 03/11/05 (0)
  • Re: my M535i for sale in USA - Ray in Phoenix 05:50:19 03/11/05 (0)
  • Now I wish I had lots of money :( (nt) - Mike in Gburg 04:32:27 03/11/05 (0)
• 10.30am for breakfast on Monday morning - Michael R from Melbourne 22:24:41 03/10/05 (5)
  • Bugger bugger bugger - Mike E 20:46:29 03/11/05 (4)
    • Hm, what'd you do? - Remy Davison 07:03:09 03/12/05 (3)
      • Might need a known good ECU - Mike E 15:01:21 03/12/05 (0)
      • Dunno - Mike E 12:29:15 03/12/05 (1)
        • ECU - Michael R from Melbourne 21:07:53 03/12/05 (0)
• Oil ten buck tip, wrench etc. - T.Han 21:29:20 03/10/05 (1)
  • How true! LOL! (nt) - Velocewest 12:58:32 03/11/05 (0)
• First Fives T-shirt list part deux - Try it again - Eric Q 21:18:54 03/10/05 (11)
  • Re: First Fives T-shirt whant's in Russia ) - Temich 20:53:57 03/11/05 (1)
    • See the thread above... - Eric Q 21:18:56 03/12/05 (0)
  • Re: First Fives T-shirt list part deux - Try it again - Andrew Anagnostopoulos 09:47:43 03/11/05 (1)
    • Can you send me an e-mail? - Eric Q 18:13:49 03/11/05 (0)
  • Re: Worked for me......I think you need Excel - NC Doug 06:53:46 03/11/05 (0)
  • worked for me, my order is correct, thanks. (nt) - Adam Wilson in Chicago 04:24:30 03/11/05 (0)
  • Still doesn't work for me - Mike W. 22:34:50 03/10/05 (4)
    • Same here... - Tarazona 14:59:00 03/11/05 (3)
      • Do you have Excel? - Eric Q 18:14:52 03/11/05 (2)
        • Yep, I have Excel... - Tarazona 18:28:02 03/11/05 (1)
          • One other suggestion... - Eric Q 01:47:07 03/12/05 (0)
• 79 528i 4spd 5spd zf auto - Carl 21:11:24 03/10/05 (1)
  • Not in the US - Mike W. 22:07:04 03/10/05 (0)
• someone buy this in Anaheim - greghill-phx,az 19:43:31 03/10/05 (5)
  • Re: someone buy this in Anaheim - Jim Hilbrant 15:37:07 03/11/05 (2)
    • Nice work - greghill-phx,az 17:25:15 03/11/05 (1)
      • Re: Nice work - Jim Hilbrant 10:14:46 03/12/05 (0)
  • Re: someone buy this in Anaheim - Jim Hilbrant 08:47:28 03/11/05 (0)
  • photos - greghill-phx,az 20:07:26 03/10/05 (0)
• passenger-side mirror??? - Art in CA 12:17:16 03/10/05 (3)
  • Early E28 Works - John in Simi Valley 20:58:15 03/10/05 (0)
  • Michael R has a few - Mike E 17:14:08 03/10/05 (0)
  • try ebay - Bill Hynes 12:24:51 03/10/05 (0)
• Shocks Euro-US - GSS 12:14:42 03/10/05 (1)
  • Re: Shocks Euro-US - Velocewest 12:43:44 03/10/05 (0)
• Wiring in a starter button. - Big Dog 11:03:07 03/10/05 (0)
• 528 purchase - Garret 10:41:04 03/10/05 (3)
  • Re: 528 purchase - Carl 14:06:40 03/10/05 (0)
  • Re: 528 purchase - Ryan Bryan 11:43:08 03/10/05 (0)
  • Re: 528 purchase - Brian in Camarillo 11:39:41 03/10/05 (0)
• plug for someone else, German Car Badges - Adam Wilson in Chicago 10:16:01 03/10/05 (0)
• 79 528i 4 speed FS in Las Vegas - Gordon 10:08:08 03/10/05 (0)
• which flywheel(motronic) to use on 3.5l - Ryan Bryan 09:56:33 03/10/05 (5)
  • I believe only the 83 533i has the light flywheel - Craig in Davis 10:28:39 03/10/05 (4)
    • Re: I believe only the 83 533i has the light flywh - jim@dashop 20:58:45 03/10/05 (3)
      • because the aftermarket aluminum is too cool! - Adam Wilson in Chicago 13:00:49 03/11/05 (0)
      • So I've weighed standard E12 flywheels before - Frank H 09:31:53 03/11/05 (0)
      • Changed about 1-84 - Mike W. 22:31:09 03/10/05 (0)
• Warped head - Craig in Davis 09:16:32 03/10/05 (3)
  • rockers are NOT resuesable - Sam Schutlz 17:47:32 03/10/05 (2)
    • I beg to differ - Mike W. 22:17:07 03/10/05 (0)
    • BMW repair manual says you can reuse rockers - Craig in Davis 18:22:19 03/10/05 (0)
• What Brake pads&rotors?? - Andrew 07:27:50 03/10/05 (3)
  • Re: What Brake pads&rotors?? - Velocewest 09:06:18 03/10/05 (2)
    • Re: What Brake pads&rotors?? - Andrew 09:30:55 03/10/05 (1)
      • Pagid Black is stock/street - Velocewest 13:07:22 03/10/05 (0)
• Clean E12's wanted for photo-op with Paul Bracq - Peter Florance - First Fives Dictator for Life 06:02:31 03/10/05 (7)
  • Re: Clean E12's wanted for photo-op with Paul Bracq - Ryan Bryan 10:01:13 03/10/05 (3)
    • Re: Clean E12's wanted for photo-op with Paul Bracq - Reed 11:46:41 03/10/05 (2)
      • Re: Clean E12's wanted for photo-op with Paul Bracq - Ryan Bryan 11:58:58 03/10/05 (0)
      • what if I push my M535i there? - Adam Wilson in Chicago 11:58:45 03/10/05 (0)
  • OK east coasters, time to represent! - Velocewest 09:39:35 03/10/05 (1)
    • Hey... Polish Mellow up.... - Lars OBG... 10:50:29 03/10/05 (0)
  • Re: Clean E12's wanted for photo-op with Paul Bracq - Reed 06:32:27 03/10/05 (0)
• Rear shocks for 6 series. - Michael R from Melbourne 01:54:48 03/10/05 (5)
  • Thanks Mike - Remy Davison 05:18:13 03/10/05 (3)
    • Att: Remy - Imparts have bilsteins for e12 - Michael R from Melbourne 15:30:19 03/10/05 (2)
      • Re: Att: Remy - Imparts have bilsteins for e12 - Remy Davison 05:13:19 03/11/05 (1)
        • Oops I meant Monday NT - Remy Davison 05:14:49 03/11/05 (0)
  • Sorry - this is for Remy Davison - Doh! - Michael R from Melbourne 01:55:42 03/10/05 (0)
• First Fives T-Shirts - The List - Eric Q 22:17:48 03/09/05 (12)
  • cant access the list (nt) - Mike in Gburg 19:58:41 03/10/05 (0)
  • Re: First Fives T-Shirts - The List - russell moat 17:44:31 03/10/05 (0)
  • its not been said enough...THANK YOU ERIC - eric in denver 16:31:37 03/10/05 (0)
  • Re: First Fives T-Shirts - The List - Ryan Bryan 15:58:18 03/10/05 (0)
  • Can I have a medium? - Art in CA 12:20:33 03/10/05 (0)
  • Eric, need to set folder options to "share" - Velocewest 08:59:48 03/10/05 (1)
    • I thought I did that... - Eric Q 18:19:56 03/10/05 (0)
  • Doesn't work, at home, or on office pc (nt) - Adam Wilson in Chicago 07:04:24 03/10/05 (0)
  • Can I order one XL, thanks - Andrew 06:37:27 03/10/05 (0)
  • Not working - NC Doug 06:21:05 03/10/05 (0)
  • I cant access the list - (NT) - Niklas Edlund 00:20:26 03/10/05 (1)
    • Re: I cant access the list - (NT) - Chris Hollis 04:57:47 03/10/05 (0)
• Oil story - T.Han 20:46:07 03/09/05 (5)
  • it will make him way more than he could have made. - eric in denver 21:51:16 03/09/05 (0)
  • All those places are independently owned... - Lenny D. 21:29:05 03/09/05 (0)
  • Watch the Obits... And have that man bronzed - Lars OBG... 21:11:36 03/09/05 (0)
  • Great Oil story - John in Simi Valley 21:03:00 03/09/05 (1)
    • And a $10 tip , , , , , , nt - Jeff (Atlanta) 07:36:55 03/10/05 (0)
• Fan wrench - T.Han 20:31:26 03/09/05 (1)
  • Re: Fan wrench - Velocewest 09:10:35 03/10/05 (0)
• She has to go... (kind of long) - eli 19:22:39 03/09/05 (0)
• auto trans stuck in 3rd - greghill-phx,az 19:09:46 03/09/05 (6)
  • Re: auto trans stuck in 3rd - Edward Beech 03:26:20 03/10/05 (2)
    • Nope, that didn't start until 4HP22EH - Mike W. 18:49:41 03/10/05 (0)
    • Nope... ZF on this one - Lars OBG 10:51:51 03/10/05 (0)
  • Nope, no solenoid - Mike W. 20:55:39 03/09/05 (2)
    • The guy who is rebuilding these and 4HP's for - Lars Olbimmerguy 21:07:51 03/09/05 (1)
      • Pardon my gramma and spelling... it's 9 PM - Lars OBG 21:09:50 03/09/05 (0)
• 79 528i swap to 84 318i ? - Carl 19:06:58 03/09/05 (4)
  • Re: 79 528i swap to 84 318i ? - Velocewest 20:07:48 03/09/05 (3)
    • didn't alpina make one? - stewart in slc 21:55:51 03/09/05 (2)
      • Re: didn't alpina make one? - Carl 22:29:36 03/09/05 (1)
        • A colleague had one... - Mike E 23:29:01 03/09/05 (0)
• Problem in the cold weather... - Bill Hynes 17:52:31 03/09/05 (1)
  • Re: Problem in the cold weather... - Remy Davison 05:17:38 03/11/05 (0)
• South African E12 M535i - Ray in Phoenix 13:58:32 03/09/05 (1)
  • No, but Australia yes - Remy Davison 20:21:25 03/09/05 (0)
• New wheels - John Kyle 09:53:22 03/09/05 (3)
  • Re: New wheels - Velocewest 20:12:40 03/09/05 (2)
    • Re: New wheels - John Kyle 04:31:32 03/10/05 (1)
      • Re: New wheels - Velocewest 09:22:39 03/10/05 (0)
• Anyone have any experience with Erebuni kits? - booker535 (e28 guy) 09:17:00 03/09/05 (0)
• M535i fuel pump - John Kyle 09:15:58 03/09/05 (2)
  • if the euro fuel tank doesn't have the aux pump - ...tom 11:22:15 03/09/05 (0)
  • Main fuel pump for all L-jet BMW is the same. - Frank H 09:26:22 03/09/05 (0)
• e12 M535i repair manual - John Kyle 08:51:38 03/09/05 (1)
  • There isn't one - Frank H 09:29:20 03/09/05 (0)
• Finally got the track car to run right! - Big Dog 08:18:11 03/09/05 (4)
  • Just sorted my issues the same way - Velocewest 13:11:18 03/09/05 (3)
    • Just curious.. do you have a spec to shim the - Frank H 14:52:51 03/09/05 (2)
      • Re: Just curious.. do you have a spec to shim the - Velocewest 15:25:48 03/09/05 (1)
        • No spec in Bentley - Velocewest 20:04:46 03/09/05 (0)
• company doing ecu repair? input needed - paul 07:21:08 03/09/05 (3)
  • Re: company doing ecu repair? input needed - Troy Rudolph 20:08:44 03/09/05 (0)
  • Give Maximillian Importing a call - Misha 18:37:14 03/09/05 (0)
  • What kind of ECU do you need? - Frank H 08:39:52 03/09/05 (0)
• m535i spring lengths and rates - colinwhyte 01:44:24 03/09/05 (4)
  • Re: m535i spring lengths and rates - Eddie in TO 07:45:19 03/09/05 (0)
  • apples and oranges - Peter Florance 04:32:04 03/09/05 (2)
    • Re: apples and oranges - colinwhyte 01:56:19 03/12/05 (0)
    • Re: apples and oranges - Pelle Persson 09:38:54 03/09/05 (0)
• '80 528i 5sp on Ebay - Phil Marx 20:55:05 03/08/05 (8)
  • Re: '80 528i 5sp on Ebay - Chris L 15:14:17 03/09/05 (1)
    • Re: '80 528i 5sp on Ebay - Carl 15:26:56 03/09/05 (0)
  • Great looking car! PIty for me its a southpaw.. - Mike E 23:14:41 03/08/05 (5)
    • Saw one in the same color today , love it. - Blair 00:27:14 03/09/05 (4)
      • That's Cypress Green Metallic - Brian in Camarillo 08:11:29 03/09/05 (3)
        • You should go for it Brian! - Tarazona 20:26:35 03/09/05 (1)
          • I'm thinking about it....(m) - Brian in Camarillo 15:15:59 03/10/05 (0)
        • See COTM Nov. 2004... - Lenny D. 11:25:57 03/09/05 (0)
• 5th annual San Diego St. Patrick's Day gathering - Darin O' The Glen 20:45:28 03/08/05 (4)
  • Re: 5th annual San Diego St. Patrick's Day gatheri - James Hineline 22:25:25 03/09/05 (0)
  • Yes, I might need the sofa... - Eric Q 21:58:00 03/08/05 (0)
  • Re: 5th annual San Diego St. Patrick's Day gathering - Darin O' The Glen 21:17:11 03/08/05 (1)
    • See last post for last year's pics. DOH! - Darin O' The Glen 21:18:30 03/08/05 (0)
• 2 528i autos at picakapart Kilsyth - Mike E 20:25:00 03/08/05 (2)
  • Re: 2 528i autos at picakapart Kilsyth - Adrian 04:49:36 03/11/05 (0)
  • Thanks for the tip! (pun) - Remy DAvison 20:30:03 03/09/05 (0)
• Windscreen silver plastic trim - James from Tasmania 19:04:04 03/08/05 (3)
  • Re: Windscreen silver plastic trim - Michael from Melbourne 02:11:28 03/10/05 (0)
  • Re: Windscreen silver plastic trim - F.E. 15:37:35 03/09/05 (0)
  • Replacement is the only cure... - Mike W. 19:26:28 03/08/05 (0)
• Current to radio when brakes pressed - Robert Knowlton 18:35:43 03/08/05 (6)
  • Common problem - Michael R from Melbourne 19:02:50 03/08/05 (5)
    • Re: Common problem - Peter Florance 19:20:10 03/08/05 (4)
      • Re: Common problem - Kaveman 21:20:53 03/08/05 (2)
        • Re: Common problem - Robert Knowlton 05:17:34 03/09/05 (1)
          • Re: Common problem - Walt Barie 05:47:08 03/09/05 (0)
      • Maybe a diode then the cap? - Mike W. 19:29:31 03/08/05 (0)
• fuel pump always running - Stephen 17:42:52 03/08/05 (1)
  • in my car... - Mike E 00:57:50 03/09/05 (0)
• Rear tailing arm excentrical bushes installing - Zolka 13:05:33 03/08/05 (3)
  • Eccentric T/A Bushing Install - craigb93 19:19:34 03/13/05 (1)
    • A Better Link - craigb93 19:30:35 03/13/05 (0)
  • Ask Niklas - Bert-Ola 13:39:16 03/09/05 (0)
• trans leak from spedo cable - greg 07:23:33 03/08/05 (2)
  • Re: trans leak from spedo cable - colinwhyte 01:52:39 03/09/05 (0)
  • Re: trans leak from spedo cable - Jeff (Atlanta) 20:40:18 03/08/05 (0)
• E12 535i EFI - chris 01:46:03 03/08/05 (0)
• Frank Haas I need your help - Mitch in Huntington Beach 00:10:15 03/08/05 (0)
• Need factory air valance - Rami 23:07:32 03/07/05 (0)
• Melbourne FirstFivers Meet Mon 14th Labour Day - Remy Davison 21:29:06 03/07/05 (3)
  • bells - Mike E 00:30:00 03/08/05 (1)
    • I'm free - Michael R from Melbourne 14:34:03 03/08/05 (0)
  • Re: Melbourne FirstFivers Meet Mon 14th Labour Day - Aaron from Oz 00:29:34 03/08/05 (0)
• Speaking of being proud of E12s... - Lenny D. 20:59:33 03/07/05 (4)
  • saw that, congrats! - Adam Wilson in Chicago 08:29:16 03/08/05 (1)
    • Thanks... - Lenny D. 21:39:51 03/08/05 (0)
  • High Five to all FirstFives! (nt) - Lenny D. 21:03:57 03/07/05 (1)
    • Congratulations Lenny! nt - Damien in Sydney 22:31:14 03/07/05 (0)
• Jim Hilbrant's broken studs - Peter Florance 19:20:51 03/07/05 (4)
  • Re: Jim Hilbrant's broken studs - Jim Hilbrant 13:05:17 03/08/05 (0)
  • Re: Jim Hilbrant's broken studs - jim@dashop 20:48:21 03/07/05 (2)
    • Re: Jim Hilbrant's broken studs - Jim Hilbrant 14:55:14 03/09/05 (0)
    • Re: Jim Hilbrant's broken studs-aux. air valve - Jim Hilbrant 05:46:42 03/08/05 (0)
• Paging Jaime Obando - ChuckNC 16:16:15 03/07/05 (0)
• Alternator Mount Bushing - Troy Rudolph 15:33:30 03/07/05 (3)
  • I was disapointed - Mike W. 17:57:59 03/07/05 (0)
  • Re: Alternator Mount Bushing - Jeff (Atlanta) 16:21:44 03/07/05 (0)
  • Re: Alternator Mount Bushing - Velocewest 15:40:47 03/07/05 (0)
• Visiting from the mye28.com board - Need Advise - Mike K 13:29:17 03/07/05 (14)
  • I'd consider - Mike W. 18:10:17 03/07/05 (1)
    • Re: I'd consider - Mike K 13:52:12 03/08/05 (0)
  • I think I would pull the head for the damage est>> - Craig in Davis 14:20:42 03/07/05 (7)
    • Re: I think I would pull the head for the damage est>> - Mike K 14:28:56 03/07/05 (6)
      • use to live in Bloomfield!!! - John From Antioch 20:52:50 03/07/05 (1)
        • Re: use to live in Bloomfield!!! - Mike K 13:46:25 03/08/05 (0)
      • shouldn't be any difference in maint costs - Peter Florance 16:08:39 03/07/05 (2)
        • Re: auxiliary air valve-broken bolts!! - Jim Hilbrant 18:54:29 03/07/05 (1)
          • see my post above - Peter Florance 19:18:52 03/07/05 (0)
      • I think the cheapest fix will be a long block>> - Craig in Davis 14:34:07 03/07/05 (0)
  • Re: Visiting from the mye28.com board - Need Advise - Big Dog 14:16:44 03/07/05 (3)
    • Re: Visiting from the mye28.com board - Need Advise - Mike K 14:20:43 03/07/05 (2)
      • Mike K... - Mike in Gburg 04:20:27 03/08/05 (1)
        • Re: Mike K... - Mike K 13:51:10 03/08/05 (0)
• O2 sensor - Karl in KS 04:36:55 03/07/05 (1)
  • Re: O2 sensor - Hans V. 10:34:27 03/07/05 (0)
• anyone near Englewood NJ? - ...tom 02:55:31 03/07/05 (0)
• 520 front struts in a 528i, why not! (Long) - Edward Beech 02:52:28 03/07/05 (1)
  • loosening that top nut - Mike E 13:02:28 03/07/05 (0)
• Found some wheels>> - Craig in Davis 21:57:19 03/06/05 (9)
  • 14/15 are what the suspension engineered for. - Lars Olbimmerguy 08:31:10 03/07/05 (8)
    • How much stress do big wheels put on axles? - Remy Davison 19:45:56 03/07/05 (1)
      • I think the major impact is up front - Velocewest 11:34:48 03/08/05 (0)
    • Lars, are you saying - Velocewest 15:31:47 03/07/05 (3)
      • Nope, personal decision.. just saying no apologies - Lars Olbimmerguy 16:33:28 03/07/05 (2)
        • Re: Nope, personal decision.. just saying no apologies - Velocewest 21:33:44 03/07/05 (1)
          • VWest... email me..something of interest... - Lars Olbimmerguy 22:24:40 03/07/05 (0)
    • Didn't even think about that but it makes me feel> - Craig in Davis 14:35:24 03/07/05 (1)
      • Tires for your new wheels - Michael R from Melbourne 14:49:52 03/07/05 (0)
• WTB BBS Basketweaves 16" X 8" ET24 - Bob in San Jose 21:51:41 03/06/05 (1)
  • Re: WTB BBS Basketweaves 16" X 8" ET24 - Bob in San Jose 21:59:13 03/06/05 (0)
• This pump any good? - Dan J 21:10:27 03/06/05 (1)
  • It should work fine - Velocewest 10:07:00 03/07/05 (0)
• error on page 66, March Roundel, E12 left out - Adam Wilson in Chicago 19:19:31 03/06/05 (7)
  • Big props for chasing it - Velocewest 13:57:44 03/07/05 (5)
    • In your oponion - Jim 17:34:31 03/07/05 (4)
      • Re: In your oponion - Velocewest 21:44:21 03/07/05 (1)
        • Re: In your oponion - jim 19:10:49 03/08/05 (0)
      • slightly different take on it - Peter Florance 19:17:32 03/07/05 (1)
        • Re: slightly different take on it - jim 19:18:00 03/08/05 (0)
  • Re: error on page 66, March Roundel, E12 left out - Mark 02:40:54 03/07/05 (0)
• Batt voltage - Eric 17:44:36 03/06/05 (5)
  • Checking voltages - Mike W. 19:26:05 03/06/05 (4)
    • Re: Checking voltages - EB 14:50:55 03/10/05 (0)
    • how's your batt light? - ChuckNC 23:18:42 03/06/05 (1)
      • Good point, sometimes I overlook the obvious - Mike W 16:40:19 03/07/05 (0)
    • I hope I never need it but great to know >>> - Craig in Davis 21:42:10 03/06/05 (0)
• Paging Jaime Obando - you got mail (nt) - Michael R from Melbourne 17:38:44 03/06/05 (0)
• 528 no fuel - Eric 17:35:33 03/06/05 (1)
  • Info re pumps>>> - Craig in Davis 22:12:36 03/06/05 (0)
• E12 M535i Front Spoiler on ebay! - Nick in Co Springs 11:45:03 03/06/05 (3)
  • Yeah but do you think that crack can be fixed? - Blair 20:02:52 03/06/05 (1)
    • Probably - Al from Oz 22:22:29 03/06/05 (0)
  • There are the metal brackets and how they , , - Jeff (Atlanta) 17:38:18 03/06/05 (0)
• Calling Central Locking Gurus - Dale 09:12:13 03/06/05 (0)
• Drivers side Elec. Mirror Needed for 78 m530i - Bernie Aguilar 08:08:06 03/06/05 (1)
  • Sure I've got one - Mike W.mgwwassall@cs.com 10:54:06 03/06/05 (0)
• Paging Craig in Davis - Bob in San Jose 01:43:09 03/06/05 (1)
  • Bob, you have mail. eom - Craig in Davis 06:34:53 03/06/05 (0)
• fog lights only work when hi-beams are on, Help! - bigperm206 20:34:37 03/05/05 (0)
• cold start valve and the temp/time valve replaceme - Jim Hilbrant 13:20:25 03/05/05 (0)
• hey west coasters...!!! - jim@dashop 17:06:04 03/04/05 (2)
  • Re: hey west coasters...!!! - jim hilbrant 13:15:36 03/05/05 (1)
    • absolutely..!!! - jim@dashop 18:05:04 03/05/05 (0)
• Realty clean 79 530 in LA for 400 bucks - Noel in LA 12:27:53 03/04/05 (1)
  • Re: Realty clean 79 530 in LA for 400 bucks - Noel in LA 12:29:12 03/04/05 (0)
• Alpina "big valved" head for sale - Frank H 10:01:09 03/04/05 (1)
  • Re: final drives - Mitch in Huntington Beach 00:07:21 03/08/05 (0)
• Extrude hone group buy - Frank H 09:27:29 03/04/05 (0)
• Junkyard help finding >89 325i headlight lens>>>> - Craig in Davis 07:38:18 03/04/05 (0)
• Wires off the Coil - Dan Lafley 07:05:32 03/04/05 (5)
  • Re: Wires off the Coil - Hans V. 10:59:05 03/04/05 (4)
    • i have a 12V on the negative side....... - Dan Lafley 12:58:45 03/04/05 (3)
      • That makes sense, but - Mike W. 21:59:51 03/04/05 (2)
        • SUCCESS!!! - Dan Lafley 08:29:42 03/05/05 (1)
          • Good to hear Dan - Velocewest 15:39:33 03/07/05 (0)
• '80 528 - worth it to convert to pertronix? - severin 00:50:37 03/04/05 (4)
  • thanks, anyone have part number for dis. springs? - severin 20:08:53 03/04/05 (1)
    • I'd try the dealer first for dizzy rebuild parts - Velocewest 06:34:36 03/05/05 (0)
  • Re: '80 528 - worth it to convert to pertronix? - Hans V. 11:09:41 03/04/05 (0)
  • Re: '80 528 - worth it to convert to pertronix? - Peter Florance 04:32:56 03/04/05 (0)
• Emission Decal - Devin Calder 17:14:50 03/03/05 (1)
  • Re: Emission Decal - greghill-phx,az 12:33:38 03/05/05 (0)
• high idle - brett 15:14:03 03/03/05 (5)
  • Re: high idle - Craig 19:07:39 03/03/05 (4)
    • Re: high idle - brett 07:56:41 03/04/05 (3)
      • Based on what caused the problem I would >>> - Craig in Davis 08:13:43 03/04/05 (2)
        • Re: Based on what caused the problem I would >>> - brett 13:11:31 03/04/05 (1)
          • Sounds good eom - Craig in Davis 13:56:11 03/04/05 (0)
• Coil Wires.... - Dan Lafley 15:06:48 03/03/05 (0)
• Sway Bars - Sierra 11:54:59 03/03/05 (7)
  • Addco sway bars for BMW's, Link... - Jeff Olson 19:15:49 03/03/05 (2)
    • sent email - Peter Florance - First Fives Dictator for Life 04:46:49 03/04/05 (1)
      • Call them in NC, (800) 621-8916, more... - Jeff Olson 09:34:42 03/04/05 (0)
  • Re: Sway Bars - KSBinVA 13:17:15 03/03/05 (3)
    • Re: Sway Bars don't exist ??? - sierra 16:28:19 03/03/05 (2)
      • Re: Sway Bars don't exist ??? - Peter Florance 17:16:06 03/03/05 (1)
        • I have a Korman set taking up space. - jeff 18:30:52 03/03/05 (0)
• Getrag 225 dogleg ???? HELP ! - Niklas Edlund 23:27:00 03/02/05 (3)
  • I found a 225 casting on my 245 OD 5speed nt - stewart in slc 00:54:16 03/04/05 (0)
  • Could be, if you notice in the ETK - Mike W. 22:07:16 03/03/05 (0)
  • 520i 5 speed??? - Mike E 23:30:48 03/02/05 (0)
• Car of the Month - April 2005 - Troy Rudolph (Webmaster) 20:53:48 03/02/05 (5)
  • Re: Car of the Month - April 2005 - T.Han 08:29:54 03/03/05 (0)
  • Uh, March? - Mike E 23:27:17 03/02/05 (3)
    • Re: Uh, March? - Mark 09:04:48 03/04/05 (2)
      • I agree - Nate in Utah 09:52:04 03/06/05 (1)
        • Re: I agree - Damien in Sydney 18:22:41 03/06/05 (0)
• Trans leak - T.Han 18:44:42 03/02/05 (5)
  • Selector shaft seal - Mike W. 19:48:59 03/03/05 (0)
  • Check the o-ring on the speedo drive for the leak - Velocewest 11:10:37 03/03/05 (2)
    • mine was near o ring...and then... - eric in denver 18:31:28 03/03/05 (0)
    • Re: Check the o-ring on the speedo drive for the l - T.Han 13:08:38 03/03/05 (0)
  • Not till it's too late. Put your finger in , , , - Jeff (Atlanta) 20:05:27 03/02/05 (0)
• 3.5L conversion - Bill Hynes 17:25:58 03/02/05 (2)
  • A lot - Mike W. 21:49:54 03/03/05 (0)
  • Re: 3.5L conversion - Karl in KS 19:58:38 03/02/05 (0)
• valve tapping - Devin Calder 15:01:06 03/02/05 (4)
  • looser is louder NT - eric in denver 20:55:15 03/02/05 (0)
  • the valve train should always have some noise - Sam SChultz 15:32:14 03/02/05 (2)
    • I have the same problem !! I will do a valve adj. - Jaime Obando 09:04:30 03/03/05 (1)
      • !*?/ = eccentrics - Velocewest 11:16:47 03/03/05 (0)
• 5er Fest AutoX - I'm in! - Peter Florance - First Fives Dictator for Life 14:21:56 03/02/05 (5)
  • Now I don't have a chance.... - Eric Q 00:12:45 03/03/05 (0)
  • me too - Karl in KS 20:00:27 03/02/05 (0)
  • when and where?.....nt - Daniel H 18:52:04 03/02/05 (2)
    • Sorry, I see now, but.......... - Daniel h 20:49:10 03/02/05 (1)
      • Re: Sorry, I see now, but.......... - Peter Florance 11:00:15 03/03/05 (0)
• Caliper rebuilding... why do it myself? - Bruce in Seattle 11:02:15 03/02/05 (10)
  • I was just looking at AutoZone website - Velocewest 14:54:20 03/03/05 (1)
    • Scroll down, read my post; just do it! (nt) - Lenny D. 18:46:46 03/03/05 (0)
  • I just ordered kits from Mesa - Bruce in Seattle 20:41:10 03/02/05 (0)
  • $45??? each??? - Karl in KS 20:08:17 03/02/05 (0)
  • Who's the dealer in Seattle? - Velocewest 13:53:57 03/02/05 (1)
    • Dewey, Cheetem, & Howe - Bruce 20:26:31 03/02/05 (0)
  • I just went through this myself... - Lenny D. 12:06:23 03/02/05 (3)
    • Re: I just went through this myself... - Jim Hilbrant 15:22:27 03/02/05 (1)
      • I should have also said... - Lenny D. 21:45:11 03/02/05 (0)
    • Give John a call.... - Misha 15:20:44 03/02/05 (0)
• Paging Tulsa Dave - Brian in Camarillo (now) 10:33:40 03/02/05 (3)
  • Strange??? - Karl in KS 20:11:43 03/02/05 (0)
  • It would look rather strange????? - Tulsa Dave 10:58:41 03/02/05 (1)
    • OK, so I'm new to paint matching... - Brian in Camarillo 22:16:02 03/02/05 (0)
• e12 hood - peter mooney 09:46:02 03/02/05 (0)
• save health for a better life with nosmoq! - sweety 05:51:09 03/02/05 (0)
• 79 E12 trailing arm bushing replacement - Jim Hilbrant 05:47:06 03/02/05 (4)
  • remove trailing arm, ... - ...tom 06:59:29 03/02/05 (0)
  • Re: 79 E12 trailing arm bushing replacement - Pete 06:47:35 03/02/05 (1)
    • ditto...except - Karl in KS 20:20:11 03/02/05 (0)
  • Re: 79 E12 trailing arm bushing replacement - Chris Hollis 06:20:46 03/02/05 (0)
• Motor swap 745i - Chris Itterly - Kalamazoo, Michigan 03:44:11 03/02/05 (7)
  • Re: Motor swap 745i - peter mooney 09:39:32 03/02/05 (4)
    • Re: Motor swap 745i - Chris Itterly - Kalamazoo, Michigan 15:41:11 03/02/05 (0)
    • Re: Motor swap 745i - Velocewest 13:57:24 03/02/05 (2)
      • no clearance problem on my 6, however> - marc79euro645 18:36:39 03/02/05 (1)
        • No clearance isses on e12s NT - Mike In Chicago 16:38:34 03/03/05 (0)
  • 745i - papajimm nh 81 528i (82 745 x2 no more) 05:27:42 03/02/05 (1)
    • Re: 745i - Chris Itterly - Kalamazoo, Michigan 15:46:04 03/02/05 (0)
• '81 528i rotor arm - Edward Beech 23:23:15 03/01/05 (2)
  • Right - Karl in KS 20:25:59 03/02/05 (1)
    • Re: Right - Edward Beech 22:19:30 03/02/05 (0)
• Installation Instructions as pdf - james 22:36:07 03/01/05 (0)
• Labour day March 14th - paging Remy & Co - Michael R from Melbourne 20:19:18 03/01/05 (1)
  • Sounds good to me - Remy Davison 19:37:25 03/07/05 (0)
• saner custom sway bar (Velocewest?) - Peter Florance 19:21:07 03/01/05 (5)
  • I might be able to adopt the project - Velocewest 20:36:55 03/01/05 (4)
    • lighter would be good - Peter Florance 04:02:51 03/02/05 (3)
      • Re: lighter would be good - Walt Barie 05:32:05 03/02/05 (2)
        • Re: lighter would be good - Peter Florance 11:02:59 03/03/05 (0)
        • I put the front bar off an e23/733 at 28mm .> - marc79euro645 18:49:15 03/02/05 (0)
• Thermal reactors - Bryan 18:06:13 03/01/05 (8)
  • Re: Thermal reactors - Mike W. 19:21:53 03/01/05 (7)
    • Re: Thermal reactors - Edward Beech 00:01:27 03/02/05 (6)
      • Re: Thermal reactors - Bryan 10:47:33 03/02/05 (5)
        • Removing Thermals - Mike W. 18:33:38 03/02/05 (2)
          • Re: Removing Thermals - Bryan 15:31:15 03/03/05 (1)
            • Yes and no - Mike W. 18:22:13 03/03/05 (0)
        • Re: Thermal reactor removal - Velocewest 14:00:14 03/02/05 (1)
          • Re: Thermal reactor removal - Edward Beech 15:21:12 03/02/05 (0)
• bmw520i cold start problem - steve syvret 15:31:03 03/01/05 (1)
  • Re: bmw520i cold start problem - Mike E 15:39:28 03/01/05 (0)
• Composite hoods, bumpers.... - Mike in Gburg 12:57:34 03/01/05 (15)
  • Im in for a early style hood .. - Niklas Edlund 23:20:44 03/02/05 (0)
  • I'm in for a hood...and an alternative - peter mooney 09:42:28 03/02/05 (0)
  • coupguy on e9 board makes these for $250 - Tommy in PA 07:27:45 03/02/05 (0)
  • Good input... - Mike in Gburg 19:09:36 03/01/05 (1)
    • Sounds great! - Nick in Co Springs 19:20:43 03/01/05 (0)
  • Intake and carbs - Velocewest 13:59:05 03/01/05 (4)
    • Veloce... - Mike in Gburg 12:57:47 03/02/05 (1)
      • Re: Veloce... - Velocewest 11:41:07 03/03/05 (0)
    • Ignore my babbling about emission years - Velocewest 17:12:35 03/01/05 (0)
    • Re: Intake and carbs one one eBay - Velocewest 15:04:54 03/01/05 (0)
  • I'm in for the hood/bumpers - Nick in Co Springs 13:37:23 03/01/05 (1)
    • Re: I'm in for the hood/bumpers - The rev. Brendan X 17:30:41 03/01/05 (0)
  • BMW already has a intake manifold that a Holley - Frank H 13:17:55 03/01/05 (1)
    • Agreed, do Fiberglass... - Nick in Co Springs 13:40:44 03/01/05 (0)
  • Re: Composite hoods, bumpers.... - Mike in Gburg 12:59:19 03/01/05 (0)
• Engine shakes idle, is this normal? - Tomas Tupy 00:04:33 03/01/05 (2)
  • Re: Engine shakes idle, is this normal? - Gerry ACT/Oz 00:43:29 03/01/05 (1)
    • a little lumpy - Karl in KS 20:36:24 03/02/05 (0)
• Quick Spring question - Dan J 23:09:18 02/28/05 (1)
  • Re: Quick Spring question - Mike in Gburg 13:02:51 03/01/05 (0)
• Where i can get the cheapest getrag 262 bearings? - Tomas Tupy 22:02:43 02/28/05 (1)
  • Bearings - Mike W. 18:36:28 03/02/05 (0)
• Bil-schtine brain knot - Velocewest 19:46:05 02/28/05 (3)
  • Re: Bil-schtine brain knot - James (Tasmania) 18:19:28 03/01/05 (0)
  • Re: Bil-schtine brain knot - Don Daynes 07:54:02 03/01/05 (1)
    • Does anyone have - Velocewest 12:57:30 03/01/05 (0)
• Anybody have a getrag 262 laygear laying around? - Tomas Tupy 17:04:34 02/28/05 (1)
  • I've got a whole 262(4speed right?) - stewart in slc 18:58:43 02/28/05 (0)
• Car is charging again...now other things don't... - Bruce in Seattle 16:31:19 02/28/05 (3)
  • More info... everything work yesterday for 5 secs - Bruce in Seattle 10:00:16 03/01/05 (0)
  • You're getting electrical experience... - Karl in K 18:21:57 02/28/05 (1)
    • Re: You're getting electrical experience... - Bruce in Seattle 10:03:19 03/01/05 (0)
• E28 ABS disable ? - Carl 15:36:11 02/28/05 (2)
  • This is an E12 board ... - Troy Rudolph (Webmaster) 18:44:39 02/28/05 (0)
  • Not really - Mike W; 17:49:39 02/28/05 (0)
• Stalling problem seems to have gone away... - Shean 14:58:06 02/28/05 (3)
  • no...it does not seem to fix itself but.... - Eric in denver 21:16:05 03/02/05 (1)
    • Re: no...it does not seem to fix itself but.... - Shean 15:22:15 03/08/05 (0)
  • Re: Stalling problem seems to have gone away... - Shean 15:02:44 02/28/05 (0)
• Voodoo 528i? Odd E12 ignition switch glitch! - Jeff Olson 14:24:03 02/28/05 (5)
  • Re: Voodoo 528i? Odd E12 ignition switch glitch! - Bob in San Jose 21:09:34 02/28/05 (0)
  • Re: Voodoo 528i? Odd E12 ignition switch glitch! - Edward Beech 17:19:14 02/28/05 (0)
  • Hey Jeff! - Chris Hollis 15:18:00 02/28/05 (2)
    • Recently replaced with NEW hazard light switch! - Jeff Olson 19:32:25 02/28/05 (1)
      • I fixed my old switch - Chris Hollis 20:34:43 02/28/05 (0)
• Free 528iA for the taking in western-central NJ - Tim G in Central NJ 11:37:19 02/28/05 (4)
  • I emailed u, but it was returned... - Ryan Bryan 08:25:46 03/01/05 (1)
    • Ryan, you've got mail... - Tim G in Central NJ 10:35:22 03/01/05 (0)
  • Re: Free 528iA for the taking in western-central NJ - Nate in Utah 21:58:16 02/28/05 (0)
  • Check your mail (nt) - Mike in Gburg 12:37:24 02/28/05 (0)
• Alpina B7 turbo value - Frank Haas? - Jon in Richmond 08:28:59 02/28/05 (6)
  • Re: Alpina B7 turbo value - Frank Haas? - Mitch in Hutington Beach 23:22:51 02/28/05 (0)
  • Re: Alpina B7 turbo value - Frank Haas? - Mitch in Hutington Beach 23:19:36 02/28/05 (0)
  • While it'd be hard to speculate how much it's.... - Frank H 14:04:04 02/28/05 (1)
    • Thanks for the comments guys. Much appreciated. - Jon in Richmond 15:30:20 02/28/05 (0)
  • Re: Alpina B7 turbo value - Frank Haas? - Adam Wilson in Chicago 13:03:52 02/28/05 (0)
  • No idea what it is worth but..... - Mike in Gburg 12:45:06 02/28/05 (0)
• Paging Jim from Autobahn... - Mike in Gburg 05:16:23 02/28/05 (1)
  • Re: Paging Jim from Autobahn... - jim@da shop 16:51:47 02/28/05 (0)
• warms up and idles at 1800rpm whats going on??? - Paul 03:45:18 02/28/05 (6)
  • AAV stuck wide open maybe. eom - Craig in Davis 07:29:23 02/28/05 (4)
    • Re: AAV stuck wide open maybe. eom - Paul in Oz 16:27:24 02/28/05 (1)
      • AAV info >>> - Craig in Davis 20:42:52 02/28/05 (0)
    • Mine too but more ... - Michael R from Melbourne 14:43:23 02/28/05 (1)
      • See the Aux Air Valve FAQ it is great!! nt - Craig in Davis 20:44:43 02/28/05 (0)
  • TPS? hummmm... - Mike in Gburg 04:46:43 02/28/05 (0)
• where can I get a full molded carpet - Severin 21:35:41 02/27/05 (2)
  • In the absence of comments on this.... I don't - Lars Olbimmerguy 17:35:39 02/28/05 (1)
    • I always thought molded was a replacement part - severin 17:42:36 02/28/05 (0)
• Who scored the new seats from Western in Denver? - Richard 20:47:05 02/27/05 (0)
• e12 in local yard - Daniel H 20:32:08 02/27/05 (1)
  • Re: e12 in local yard - Robert Knowlton 10:17:03 02/28/05 (0)
• '80 528 chuges/surges at 2000-3000, help? - Severin 20:31:15 02/27/05 (2)
  • Re: '80 528 chuges/surges at 2000-3000, help? - Peter Florance 04:10:31 02/28/05 (1)
    • not the idle swith, looking to timing mech... - severin 17:20:09 02/28/05 (0)
• sunroof motor, headliner, windshield and paint - greghill-phx,az 20:02:51 02/27/05 (3)
  • Ok, have done all but paint and headliner but... - Mike in Gburg 04:42:10 02/28/05 (0)
  • Re: sunroof motor, headliner, windshield and paint - Robert Bondi HoustonTX 22:15:41 02/27/05 (0)
  • Some questions answered - Michael R from Melbourne 22:15:16 02/27/05 (0)
• Trunk interior spruce up project - Joe 19:37:25 02/27/05 (1)
  • Re: Trunk interior spruce up project - Daniel H 20:40:08 02/27/05 (0)
• small rear door glass - greghill-phx,az 19:30:37 02/27/05 (1)
  • See above post (nt) - Mike in Gburg 04:43:01 02/28/05 (0)
• Parts score! - Velocewest 19:08:20 02/27/05 (1)
  • Re: Parts score! - Frank H 19:38:42 02/27/05 (0)
• repair manual - Rick Sheesley 16:08:45 02/27/05 (2)
  • Haynes - Mike W. 17:11:40 02/27/05 (1)
    • Re: Haynes..just got one used from... - Mike in Gburg 19:00:49 02/27/05 (0)
• Is this pump compatible.. - Dan J 11:27:36 02/27/05 (1)
  • Probably, but - Mike W. 14:14:56 02/27/05 (0)
• paging Don Daynes, email me offline (nt) - Adam Wilson in Chicago 07:48:46 02/27/05 (0)
• 260 and 265 the same??? - Chowchilla 19:30:20 02/26/05 (3)
  • Re: 260 and 265 the same??? - Chowchilla 13:22:30 02/27/05 (0)
  • No, not at all - Mike W. 20:34:19 02/26/05 (1)
    • More confusion - Mike W. 22:46:53 02/26/05 (0)
• PSA, 265 tranny in Sac, Ca. - Mike W. 19:26:48 02/26/05 (2)
  • Email next time you go to PNP Rancho>>> - Craig in Davis 09:31:42 02/27/05 (1)
    • The 265 tranny is in the bed of my truck nt - Craig in Davis 14:01:08 03/03/05 (0)
• My 735i for sale on Carsales.. - Aaron from Oz 23:58:35 02/25/05 (0)
• 5er Fest has a Scholarship Fund! - Shifty in MO 23:19:51 02/25/05 (1)
  • Where are you?? - Karl in KS 18:25:16 02/28/05 (0)
• Chrome wheel arch moulds for sale on ebay - Michael R from Melbourne 23:16:48 02/25/05 (0)
• e28 leather interior for sale - Michael R from Melbourne 22:50:16 02/25/05 (6)
  • Sold! - Damien in Sydney 02:39:57 02/26/05 (1)
    • IPEC ... - Aaron from Oz 04:01:23 02/26/05 (0)
  • the wheels and recaros? How much - Aaron from Oz 23:45:17 02/25/05 (3)
    • Re: the wheels and recaros? How much - Michael R from Melbourne 11:38:37 02/26/05 (2)
      • Re: the wheels and recaros? How much - Aaron from Oz 03:27:57 02/27/05 (1)
        • Re: the wheels and recaros? How much - Michael R from Melbourne 22:23:00 02/27/05 (0)
• 16" cross spokes on ebay - Michael R from Melbourne 22:34:24 02/25/05 (0)
• front sway bar from early (e12 based) 633csi - Michael R from Melbourne 22:18:47 02/25/05 (2)
  • I'm FAIRLY sure they so - Remy Davison 17:40:49 02/27/05 (0)
  • Re: front sway bar from early (e12 based) 633csi - Mike W. 09:45:54 02/26/05 (0)
• Give u guys a update on my car, - Rami 21:16:53 02/25/05 (1)
  • Re: Give u guys a update on my car, - Velocewest 21:51:11 02/25/05 (0)
• Sonnenschutzrollo fur Heckscheibe - Velocewest 21:04:24 02/25/05 (0)
• I need 5 spd tranny 265 1980-1982 not dogleg - marc79euro645 20:36:16 02/25/05 (1)
  • try uneedapart.com - doug in ky 79 turbo 05:06:11 02/27/05 (0)
• Feels and sounds like my dirveline is loose - Nate in Utah 17:10:27 02/25/05 (4)
  • Who needs a Bentley Book - you are great! - Nate in Utah 14:16:29 02/27/05 (0)
  • grab your spanner wrenches - greghill-phx,az 09:36:24 02/27/05 (0)
  • Re: Feels and sounds like my dirveline is loose - Edward Beech 19:56:04 02/26/05 (0)
  • Depending on where the noise is coming from... - Lenny D. 11:32:49 02/26/05 (0)
• interchangable AFM? - Stephen 15:15:27 02/25/05 (3)
  • Re: interchangable AFM? - Peter Florance 17:27:57 02/25/05 (1)
    • I'm not sure - Stephen 17:50:04 02/25/05 (0)
  • I feel your pain - check the Technical FAQ... - Nate in Utah 16:43:03 02/25/05 (0)
• Does anyone have a stock front valance for81 528? - Richard 10:15:48 02/25/05 (1)
  • Yes call me - Jeff C 20:24:08 02/27/05 (0)
• Kidney Grill... - Lenny D. 08:44:52 02/25/05 (1)
  • Re: Kidney Grill... - Karl in KS 18:43:03 02/27/05 (0)
• Stupid question inside - Rami 23:02:07 02/24/05 (5)
  • The only stupid question... - Damien in Sydney 15:23:14 02/25/05 (0)
  • Re: Stupid question inside - Rand 11:37:25 02/25/05 (0)