Timing Procedure

[ Follow Ups ] [ Post Followup ] [ First Fives Bulletin Board ] [ FAQ ]

Posted by CGW on March 10, 2002 at 13:09:20 from 64.78.88.170

Have tried the Hanes method. Engine has no guts. Last line of the manual states: With Vacum line attached, should see timing mark on crank at 1000rpm .. I don't see mine until 1700. Curious because that is the rpm spec's for setting it with the vacum disconnected. Engine overheating with the Hanes method...... Help

Follow Ups:


Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ First Fives Bulletin Board ] [ FAQ ]