Posted by Troy Rudolph on December 04, 1999 at 14:05:23:
In Reply to: Re: Fade to the right posted by Troy Rudolph on December 03, 1999 at 20:06:44:
: 2) Bushings & Ball Joints: Check all your bushings, especially the strut rod bushings. If the control arm bushings are bad replace the control arm. You'll get new ball joints that way. If the ball joint has too much play, ditto.
The strut rod bushings are located in the front subframe just above the swaybar mounts. I know from personal experience that bad bushings - especially the strut rod bushing can cause "pulling" while braking.