Posted by KSBinVA on August 01, 2003 at 07:35:09 from 141.152.187.62
The job was relatively easy and took less than 30 minutes. Pulled switch from dash, used a small flat-blade screwdriver to "skirt" around where the 2 halves of the switch are held in place by the 6 tabs, twisted, bent and pulled to make the final separation, (watch that spring as it flies out),bent the stylus slightly with my thumb, inset the spring, line-up the halves, test operation,and press together. BINGO saved $40.
Thanks guys for your help! CHeers,