Posted by mattp in Melb on January 28, 2005 at 17:40:13 from from 147.10.78.76
In Reply to: New ignition switch did not work... posted by Bill Hynes on January 28, 2005 at 16:42:51:
Had the same happen on mine became quite intermittent and it turned out to be... The thin wire that goes to the tag on the starter, which is the wire the start position on the ignition switch sends power to, had corroded (oxidized) and the starter did nothing.
removed the spade terminal and cleaned up the tag on starter with little wire brush put new spade terminal on wire pushed it back on to starter and turned the key instant turn ove and start have not had problem since