Posted by Bruce in Seattle on June 14, 2005 at 18:51:19 from 207.114.226.162
I posted a while back about trying to get a stuck rotor off the hub. Yep, the BFH worked. Now I'm down to the last caliper, the left front, and two out of the three bleeder screws produce nicely. The third one, the lower outboard, is dry. The calipers are new (rebuilt) and I replaced the brake lines with steel braided lines. Any suggestions? Is that one bleed screw fed by one brake line and the other two bleed screws fed by the other brake line? It's not the screw, I can take it all the way off while the system is under pressure. Help!