76 530i carbon canister hoses?

Post your E12 technical questions and comments here. Please, no off-topic posts.

Moderators: Mike W., Pierre

Post Reply
canada karl
Posts: 1065
Joined: Tue Jan 06, 2009 3:50 pm

76 530i carbon canister hoses?

Post by canada karl »

One hose comes from the tank. Does the other hose just vent to the atmosphere? Also what affect does running with a 35 year old carbon canister have on the engine if any?
User avatar
Mike W.
Posts: 2889
Joined: Wed Aug 30, 2006 12:12 am
Location: Sonoma County

Post by Mike W. »

No, it connects to the intake manifold, the main plenum, on the drivers side IIRC. There's a couple of different vacuum fittings on it, but only one big enough for the 8MM hose. I think it's 8, it might be 6. Left unconnected it would not do anything for emissions, it would have no point of being there. I'm unaware of it being any sort of a wear item, although I have heard of them being saturated by fuel if the tank is overfilled. Still, over time I would expect it to desaturate, or dry out.
Mike W.



02 525ita. Wife's, aka grocery getter
02 530i. New to the fleet, 3 pedals.
03 QX4, AKA the Datsun. Finally got the 4WD vacationmoble to stop smoking.
07 Xterra. Still on the DL, a purchase from hell.
canada karl
Posts: 1065
Joined: Tue Jan 06, 2009 3:50 pm

Hose connection?

Post by canada karl »

Mike I dont see where the hose would connect on the intake plenum? Where does it connect on your 528i?
User avatar
alotawatts
Posts: 438
Joined: Wed Jan 07, 2009 3:52 am
Location: Seattle WA

Post by alotawatts »

528i = nipple between the tops of the first two intake runners
Three E12's and one R27
ImageImageImage
User avatar
Blaise
Posts: 917
Joined: Wed Apr 21, 2010 4:01 pm

Post by Blaise »

The rigid line coming from the rear of the car is large diameter. The canister connections are a bit smaller and the intake manifold connection is even smaller. It takes a little creativity to get the right size hoses on those.

But if I recall correctly, you want a purge valve between the canister and the manifold. That is what I did on mine.

See the red vacuum hose between intake runner 1 and 2?

<table><tr><td><a href="https://picasaweb.google.com/lh/photo/R ... site"><img src="https://lh3.googleusercontent.com/-Xwjd ... G_0160.JPG" height="480" width="640"></a></td></tr><tr><td>From <a href="https://picasaweb.google.com/1030509870 ... site">1977 530i upgrades</a></td></tr></table>

Blaise
1977 BMW 530i
1973 R75/5 BMW (motorcycle)
canada karl
Posts: 1065
Joined: Tue Jan 06, 2009 3:50 pm

Hose routing

Post by canada karl »

Blaise On my 76 there is hose on the pass side that connects to a tube that goes thru the frame. I'm assuming this goes to the gas tank but is not directly related to the canister? The hose is covered by a cloth like material and in the pictures you sent me before of your engine it looks like that hose is connected to the nipple between one and two runners! My carbon canister is located near the battery and I'm wondering if the hose on it should go to the nipple between one and two runners like someone suggested it does on the 528i. Also I have a hose that goes between 2 and 3 runners and in your pictures you don't appear to have one there at all?
Post Reply