Any decent wrecking yards in Seattle area?

Post your E12 technical questions and comments here. Please, no off-topic posts.

Moderators: Mike W., Pierre

Post Reply
User avatar
nerdorama
Posts: 15
Joined: Fri May 29, 2009 9:30 pm
Location: Seattle, WA

Any decent wrecking yards in Seattle area?

Post by nerdorama »

This isn't exactly an E12 question as I also have an E23. I've called few, but haven't found much support for the older BMW's. Have been looking for a trunk lid for my E12 and located a guy with a parts car in Portland. Now I need a front sway bar for the E23. This forum seems more attuned to working on the older cars than others I've tried.

Thanks for any help,
John
1980 528i 5spd
1986 735i
1980 528i 337k
1992 525iT 161k
bigperm206
Posts: 31
Joined: Tue Jan 06, 2009 10:53 am

e12, e23 parts

Post by bigperm206 »

I have a trunk lid off of a '79 I can check on for you that is local. Also, a gentleman on Craigslist is parting out a 745i out in Bothell. HTH.
User avatar
nerdorama
Posts: 15
Joined: Fri May 29, 2009 9:30 pm
Location: Seattle, WA

Post by nerdorama »

Thanks,

A friend is bringing a trunk lid from Portland today. The 745i is the one I've tried to contact.

John
1980 528i 337k
1992 525iT 161k
Scott Bunn
Posts: 83
Joined: Sat May 17, 2008 3:17 pm
Location: Mount Vernon, WA

Parts

Post by Scott Bunn »

I am disassembling a 77 with alot of good stuff available. I even have a 73 bav 3.0 that I scavenged from a older yard up north in SedroWoolley. Salvage yard hunting is killer somtimes.
Scott Bunn
Post Reply