New gauge project, I think it should work
Posted: Fri Jan 16, 2009 1:22 pm
Received my PLX gauge and senders (plxdevices.com) in the mail the other day and preliminary test-fitting looks good. I also purchased an adapter block from parkerperformance to mount the oil pressure and temp senders. I needed a certain thread size for the PlX senders so unfortunately I could not eliminate the stock oil pressure sender for the idiot light.
The 52mm gauge itself fits beautifully into the location for the stock clock.
The various senders and electronics boxes that will find a home in the engine bay and behind the dash, respectively.
The adapter block with oil temp, pressure, and stock idiot light senders test fit. I hope I can get this contraption to fit o.k. on the back of the head by the firewall.
The 52mm gauge itself fits beautifully into the location for the stock clock.
The various senders and electronics boxes that will find a home in the engine bay and behind the dash, respectively.
The adapter block with oil temp, pressure, and stock idiot light senders test fit. I hope I can get this contraption to fit o.k. on the back of the head by the firewall.
