And now...Master cylinder for brakes:

[Domingo]

Grommets and Knees at Master Cylinder!

I noticed I had to low a clutch and my mechanic raised the pedal a bit, worked but back into First Five found the "Go check the brake level you **** (and clutch level) I did and was way low, re-filled all ok but a tiny bit of brake fluid comes out of the front (to the car's front) grommet.

I had replaced the Master some 3 yrs ago and am about to order them but noticed possible size clash?

From eBay at Eurotec they have them as standard size for the E12 (I believe I purchased the Master from them). Are these the correct ones...?

I noticed at Maximillian catalog they also have them standard sized for my E12 ( I also get correspondingly the 1975 US E12 parts) as well as standard knee connectors.
Already asked honest Mr. Walloth at Walloth and Nesh in Germany for help.

Any suggestion here?

[Domingo]

Solution was to order both the plug and connectors and both sizes from Walloth & Nesh in Germany, delivery time? two days.

[bizz]

^ fantastic - i just ordered several bits & pieces and they turned up within 4 days (Germany --> Australia)

[Domingo]

Actually Mr. Walloth himself takes care of the costumers and knows plenty about BMW and classics. He will not try to push the costumer into buying more than what's needed. Big relief nowadays...