Page 1 of 1
Mechanical advance repair?
Posted: Fri Dec 21, 2012 6:38 pm
by DirtyBarbarian
My distributor seems to have no mechanical advance. With the vacuum advance plugged there is no movement of the timing mark while revving. Is it possible to just replace the springs and/or weights to fix the problem or do i need to replace to entire distributor.
Posted: Fri Dec 21, 2012 6:59 pm
by DirtyBarbarian
broken springs NVM
Posted: Fri Dec 21, 2012 7:06 pm
by DirtyBarbarian
HUMMMM it would seem that BMW doesn't sell replacement springs anymore....
Posted: Sun Dec 23, 2012 5:13 am
by Falkenberg
Did you try to clean & oil the mechanism? They can get stuck. One should drop some drops of oil in the axe under the rotor every now and then.
If you take the base plate out you can see what is going on there.