Fuel filter / fuel lines

Post your E12 technical questions and comments here. Please, no off-topic posts.

Moderators: Mike W., Pierre

Post Reply
T.Hanson
Posts: 1696
Joined: Wed Jul 26, 2006 7:39 am

Fuel filter / fuel lines

Post by T.Hanson »

Is there any reason for the steel fuel line components in the filter system ? It appears one could use one piece of fuel hose, curve it around. Not too long, or short ( to kink ) and eliminate two clamps, simplifying the operation.
User avatar
Mike W.
Posts: 2889
Joined: Wed Aug 30, 2006 12:12 am
Location: Sonoma County

Post by Mike W. »

I'm sure the boys in Munich had a reason originally, but don't sweat it. If you want to bypass that short steel line and can do so without it rubbing anything, do it.
Mike W.



02 525ita. Wife's, aka grocery getter
02 530i. New to the fleet, 3 pedals.
03 QX4, AKA the Datsun. Finally got the 4WD vacationmoble to stop smoking.
07 Xterra. Still on the DL, a purchase from hell.
User avatar
DMS
Posts: 307
Joined: Thu Jun 04, 2009 6:30 am
Location: Netherlands

Post by DMS »

It's no problem to do that. Just make sure there is no rubbing etc.
E12 M30B35, VEMS, HX52 never getting finished.
Post Reply